Commit 991bc362 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 microcode update from Ingo Molnar:
 "The biggest change (by Borislav Petkov) is a thorough rewrite of the
  Intel microcode loader and its interactions with the core code.

  The biggest conceptual change is the decoupling of the microcode
  loading on boot and application processors (which load the microcode
  in different scenarios), so that both parse the input patches with as
  few assumptions as possible - this also fixes various kernel address
  space randomization bugs. (The AP side then goes on and caches the
  result to improve boot performance.)

  Since the AMD side already did this, this change also opened up the
  path towards more unification/simplification of the core microcode
  loading infrastructure:

     10 files changed, 647 insertions(+), 940 deletions(-)

  which speaks for itself"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Bump driver version, update copyrights
  x86/microcode: Rework microcode loading
  x86/microcode/intel: Remove intel_lib.c
  x86/microcode/amd: Move private inlines to .c and mark local functions static
  x86/microcode: Collect CPU info on resume
  x86/microcode: Issue the debug printk on resume only on success
  x86/microcode/amd: Hand down the CPU family
  x86/microcode: Export the microcode cache linked list
  x86/microcode: Remove one #ifdef clause
  x86/microcode/intel: Simplify generic_load_microcode()
  x86/microcode: Move driver authors to CREDITS
  x86/microcode: Run the AP-loading routine only on the application processors
parents 212f3000 14cfbe55
......@@ -2775,6 +2775,10 @@ S: C/ Mieses 20, 9-B
S: Valladolid 47009
S: Spain
N: Peter Oruba
D: AMD Microcode loader driver
S: Germany
N: Jens Osterkamp
E: jens@de.ibm.com
D: Maintainer of Spidernet network driver for Cell
......
......@@ -20,6 +20,15 @@ do { \
(u32)((u64)(val)), \
(u32)((u64)(val) >> 32))
struct ucode_patch {
struct list_head plist;
void *data; /* Intel uses only this one */
u32 patch_id;
u16 equiv_cpu;
};
extern struct list_head microcode_cache;
struct cpu_signature {
unsigned int sig;
unsigned int pf;
......@@ -55,12 +64,7 @@ struct ucode_cpu_info {
void *mc;
};
extern struct ucode_cpu_info ucode_cpu_info[];
#ifdef CONFIG_MICROCODE
int __init microcode_init(void);
#else
static inline int __init microcode_init(void) { return 0; };
#endif
struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa);
#ifdef CONFIG_MICROCODE_INTEL
extern struct microcode_ops * __init init_intel_microcode(void);
......@@ -131,11 +135,13 @@ static inline unsigned int x86_cpuid_family(void)
}
#ifdef CONFIG_MICROCODE
int __init microcode_init(void);
extern void __init load_ucode_bsp(void);
extern void load_ucode_ap(void);
void reload_early_microcode(void);
extern bool get_builtin_firmware(struct cpio_data *cd, const char *name);
#else
static inline int __init microcode_init(void) { return 0; };
static inline void __init load_ucode_bsp(void) { }
static inline void load_ucode_ap(void) { }
static inline void reload_early_microcode(void) { }
......
......@@ -40,38 +40,18 @@ struct microcode_amd {
unsigned int mpb[0];
};
static inline u16 find_equiv_id(struct equiv_cpu_entry *equiv_cpu_table,
unsigned int sig)
{
int i = 0;
if (!equiv_cpu_table)
return 0;
while (equiv_cpu_table[i].installed_cpu != 0) {
if (sig == equiv_cpu_table[i].installed_cpu)
return equiv_cpu_table[i].equiv_cpu;
i++;
}
return 0;
}
extern int __apply_microcode_amd(struct microcode_amd *mc_amd);
extern int apply_microcode_amd(int cpu);
extern enum ucode_state load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size);
#define PATCH_MAX_SIZE PAGE_SIZE
#ifdef CONFIG_MICROCODE_AMD
extern void __init load_ucode_amd_bsp(unsigned int family);
extern void load_ucode_amd_ap(void);
extern int __init save_microcode_in_initrd_amd(void);
extern void load_ucode_amd_ap(unsigned int family);
extern int __init save_microcode_in_initrd_amd(unsigned int family);
void reload_ucode_amd(void);
#else
static inline void __init load_ucode_amd_bsp(unsigned int family) {}
static inline void load_ucode_amd_ap(void) {}
static inline int __init save_microcode_in_initrd_amd(void) { return -EINVAL; }
static inline void load_ucode_amd_ap(unsigned int family) {}
static inline int __init
save_microcode_in_initrd_amd(unsigned int family) { return -EINVAL; }
void reload_ucode_amd(void) {}
#endif
......
......@@ -52,10 +52,6 @@ struct extended_sigtable {
#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
extern int has_newer_microcode(void *mc, unsigned int csig, int cpf, int rev);
extern int microcode_sanity_check(void *mc, int print_err);
extern int find_matching_signature(void *mc, unsigned int csig, int cpf);
#ifdef CONFIG_MICROCODE_INTEL
extern void __init load_ucode_intel_bsp(void);
extern void load_ucode_intel_ap(void);
......
......@@ -1436,10 +1436,7 @@ void cpu_init(void)
*/
cr4_init_shadow();
/*
* Load microcode on this cpu if a valid microcode is available.
* This is early microcode loading procedure.
*/
if (cpu)
load_ucode_ap();
t = &per_cpu(cpu_tss, cpu);
......
microcode-y := core.o
obj-$(CONFIG_MICROCODE) += microcode.o
microcode-$(CONFIG_MICROCODE_INTEL) += intel.o intel_lib.o
microcode-$(CONFIG_MICROCODE_INTEL) += intel.o
microcode-$(CONFIG_MICROCODE_AMD) += amd.o
This diff is collapsed.
......@@ -3,7 +3,7 @@
*
* Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
* 2006 Shaohua Li <shaohua.li@intel.com>
* 2013-2015 Borislav Petkov <bp@alien8.de>
* 2013-2016 Borislav Petkov <bp@alien8.de>
*
* X86 CPU microcode early update for Linux:
*
......@@ -39,12 +39,15 @@
#include <asm/microcode.h>
#include <asm/processor.h>
#include <asm/cmdline.h>
#include <asm/setup.h>
#define MICROCODE_VERSION "2.01"
#define DRIVER_VERSION "2.2"
static struct microcode_ops *microcode_ops;
static bool dis_ucode_ldr;
LIST_HEAD(microcode_cache);
/*
* Synchronization.
*
......@@ -167,7 +170,7 @@ void load_ucode_ap(void)
break;
case X86_VENDOR_AMD:
if (family >= 0x10)
load_ucode_amd_ap();
load_ucode_amd_ap(family);
break;
default:
break;
......@@ -185,7 +188,7 @@ static int __init save_microcode_in_initrd(void)
break;
case X86_VENDOR_AMD:
if (c->x86 >= 0x10)
return save_microcode_in_initrd_amd();
return save_microcode_in_initrd_amd(c->x86);
break;
default:
break;
......@@ -194,6 +197,58 @@ static int __init save_microcode_in_initrd(void)
return -EINVAL;
}
struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa)
{
#ifdef CONFIG_BLK_DEV_INITRD
unsigned long start = 0;
size_t size;
#ifdef CONFIG_X86_32
struct boot_params *params;
if (use_pa)
params = (struct boot_params *)__pa_nodebug(&boot_params);
else
params = &boot_params;
size = params->hdr.ramdisk_size;
/*
* Set start only if we have an initrd image. We cannot use initrd_start
* because it is not set that early yet.
*/
if (size)
start = params->hdr.ramdisk_image;
# else /* CONFIG_X86_64 */
size = (unsigned long)boot_params.ext_ramdisk_size << 32;
size |= boot_params.hdr.ramdisk_size;
if (size) {
start = (unsigned long)boot_params.ext_ramdisk_image << 32;
start |= boot_params.hdr.ramdisk_image;
start += PAGE_OFFSET;
}
# endif
/*
* Did we relocate the ramdisk?
*
* So we possibly relocate the ramdisk *after* applying microcode on the
* BSP so we rely on use_pa (use physical addresses) - even if it is not
* absolutely correct - to determine whether we've done the ramdisk
* relocation already.
*/
if (!use_pa && relocated_ramdisk)
start = initrd_start;
return find_cpio_data(path, (void *)start, size, NULL);
#else /* !CONFIG_BLK_DEV_INITRD */
return (struct cpio_data){ NULL, 0, "" };
#endif
}
void reload_early_microcode(void)
{
int vendor, family;
......@@ -453,16 +508,17 @@ static struct attribute_group mc_attr_group = {
static void microcode_fini_cpu(int cpu)
{
if (microcode_ops->microcode_fini_cpu)
microcode_ops->microcode_fini_cpu(cpu);
}
static enum ucode_state microcode_resume_cpu(int cpu)
{
pr_debug("CPU%d updated upon resume\n", cpu);
if (apply_microcode_on_target(cpu))
return UCODE_ERROR;
pr_debug("CPU%d updated upon resume\n", cpu);
return UCODE_OK;
}
......@@ -496,6 +552,9 @@ static enum ucode_state microcode_update_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
/* Refresh CPU microcode revision after resume. */
collect_cpu_info(cpu);
if (uci->valid)
return microcode_resume_cpu(cpu);
......@@ -579,12 +638,7 @@ static int mc_cpu_down_prep(unsigned int cpu)
/* Suspend is in progress, only remove the interface */
sysfs_remove_group(&dev->kobj, &mc_attr_group);
pr_debug("CPU%d removed\n", cpu);
/*
* When a CPU goes offline, don't free up or invalidate the copy of
* the microcode in kernel memory, so that we can reuse it when the
* CPU comes back online without unnecessarily requesting the userspace
* for it again.
*/
return 0;
}
......@@ -649,8 +703,7 @@ int __init microcode_init(void)
cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "x86/microcode:online",
mc_cpu_online, mc_cpu_down_prep);
pr_info("Microcode Update Driver: v" MICROCODE_VERSION
" <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
pr_info("Microcode Update Driver: v%s.", DRIVER_VERSION);
return 0;
......
This diff is collapsed.
/*
* Intel CPU Microcode Update Driver for Linux
*
* Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com>
* H Peter Anvin" <hpa@zytor.com>
*
* This driver allows to upgrade microcode on Intel processors
* belonging to IA-32 family - PentiumPro, Pentium II,
* Pentium III, Xeon, Pentium 4, etc.
*
* Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
* Software Developer's Manual
* Order Number 253668 or free download from:
*
* http://developer.intel.com/Assets/PDF/manual/253668.pdf
*
* For more information, go to http://www.urbanmyth.org/microcode
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/firmware.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <asm/microcode_intel.h>
#include <asm/processor.h>
#include <asm/msr.h>
static inline bool cpu_signatures_match(unsigned int s1, unsigned int p1,
unsigned int s2, unsigned int p2)
{
if (s1 != s2)
return false;
/* Processor flags are either both 0 ... */
if (!p1 && !p2)
return true;
/* ... or they intersect. */
return p1 & p2;
}
int microcode_sanity_check(void *mc, int print_err)
{
unsigned long total_size, data_size, ext_table_size;
struct microcode_header_intel *mc_header = mc;
struct extended_sigtable *ext_header = NULL;
u32 sum, orig_sum, ext_sigcount = 0, i;
struct extended_signature *ext_sig;
total_size = get_totalsize(mc_header);
data_size = get_datasize(mc_header);
if (data_size + MC_HEADER_SIZE > total_size) {
if (print_err)
pr_err("Error: bad microcode data file size.\n");
return -EINVAL;
}
if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
if (print_err)
pr_err("Error: invalid/unknown microcode update format.\n");
return -EINVAL;
}
ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
if (ext_table_size) {
u32 ext_table_sum = 0;
u32 *ext_tablep;
if ((ext_table_size < EXT_HEADER_SIZE)
|| ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
if (print_err)
pr_err("Error: truncated extended signature table.\n");
return -EINVAL;
}
ext_header = mc + MC_HEADER_SIZE + data_size;
if (ext_table_size != exttable_size(ext_header)) {
if (print_err)
pr_err("Error: extended signature table size mismatch.\n");
return -EFAULT;
}
ext_sigcount = ext_header->count;
/*
* Check extended table checksum: the sum of all dwords that
* comprise a valid table must be 0.
*/
ext_tablep = (u32 *)ext_header;
i = ext_table_size / sizeof(u32);
while (i--)
ext_table_sum += ext_tablep[i];
if (ext_table_sum) {
if (print_err)
pr_warn("Bad extended signature table checksum, aborting.\n");
return -EINVAL;
}
}
/*
* Calculate the checksum of update data and header. The checksum of
* valid update data and header including the extended signature table
* must be 0.
*/
orig_sum = 0;
i = (MC_HEADER_SIZE + data_size) / sizeof(u32);
while (i--)
orig_sum += ((u32 *)mc)[i];
if (orig_sum) {
if (print_err)
pr_err("Bad microcode data checksum, aborting.\n");
return -EINVAL;
}
if (!ext_table_size)
return 0;
/*
* Check extended signature checksum: 0 => valid.
*/
for (i = 0; i < ext_sigcount; i++) {
ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
EXT_SIGNATURE_SIZE * i;
sum = (mc_header->sig + mc_header->pf + mc_header->cksum) -
(ext_sig->sig + ext_sig->pf + ext_sig->cksum);
if (sum) {
if (print_err)
pr_err("Bad extended signature checksum, aborting.\n");
return -EINVAL;
}
}
return 0;
}
/*
* Returns 1 if update has been found, 0 otherwise.
*/
int find_matching_signature(void *mc, unsigned int csig, int cpf)
{
struct microcode_header_intel *mc_hdr = mc;
struct extended_sigtable *ext_hdr;
struct extended_signature *ext_sig;
int i;
if (cpu_signatures_match(csig, cpf, mc_hdr->sig, mc_hdr->pf))
return 1;
/* Look for ext. headers: */
if (get_totalsize(mc_hdr) <= get_datasize(mc_hdr) + MC_HEADER_SIZE)
return 0;
ext_hdr = mc + get_datasize(mc_hdr) + MC_HEADER_SIZE;
ext_sig = (void *)ext_hdr + EXT_HEADER_SIZE;
for (i = 0; i < ext_hdr->count; i++) {
if (cpu_signatures_match(csig, cpf, ext_sig->sig, ext_sig->pf))
return 1;
ext_sig++;
}
return 0;
}
/*
* Returns 1 if update has been found, 0 otherwise.
*/
int has_newer_microcode(void *mc, unsigned int csig, int cpf, int new_rev)
{
struct microcode_header_intel *mc_hdr = mc;
if (mc_hdr->rev <= new_rev)
return 0;
return find_matching_signature(mc, csig, cpf);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment