Commit 9becde79 authored by Jonathan McDowell's avatar Jonathan McDowell Committed by Linus Torvalds

[PATCH] leds: Amstrad Delta LED support

Use the new LED infrastructure to support the 6 LEDs present on the Amstrad
Delta.

[akpm@osdl.org: cleanup]
Signed-off-by: default avatarJonathan McDowell <noodles@earth.li>
Ackde-by: default avatarRichard Purdie <rpurdie@rpsys.net>
Cc: Ben Dooks <ben@fluff.org.uk>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 83d4e6e7
...@@ -84,6 +84,15 @@ static struct omap_board_config_kernel ams_delta_config[] = { ...@@ -84,6 +84,15 @@ static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_UART, &ams_delta_uart_config }, { OMAP_TAG_UART, &ams_delta_uart_config },
}; };
static struct platform_device ams_delta_led_device = {
.name = "ams-delta-led",
.id = -1
};
static struct platform_device *ams_delta_devices[] __initdata = {
&ams_delta_led_device,
};
static void __init ams_delta_init(void) static void __init ams_delta_init(void)
{ {
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
...@@ -94,6 +103,8 @@ static void __init ams_delta_init(void) ...@@ -94,6 +103,8 @@ static void __init ams_delta_init(void)
/* Clear latch2 (NAND, LCD, modem enable) */ /* Clear latch2 (NAND, LCD, modem enable) */
ams_delta_latch2_write(~0, 0); ams_delta_latch2_write(~0, 0);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
} }
static void __init ams_delta_map_io(void) static void __init ams_delta_map_io(void)
......
...@@ -63,6 +63,12 @@ config LEDS_S3C24XX ...@@ -63,6 +63,12 @@ config LEDS_S3C24XX
This option enables support for LEDs connected to GPIO lines This option enables support for LEDs connected to GPIO lines
on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
depends LEDS_CLASS && MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
comment "LED Triggers" comment "LED Triggers"
config LEDS_TRIGGERS config LEDS_TRIGGERS
......
...@@ -11,6 +11,7 @@ obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o ...@@ -11,6 +11,7 @@ obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o
obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
# LED Triggers # LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
......
/*
* LEDs driver for Amstrad Delta (E3)
*
* Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <asm/arch/board-ams-delta.h>
/*
* Our context
*/
struct ams_delta_led {
struct led_classdev cdev;
u8 bitmask;
};
static void ams_delta_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct ams_delta_led *led_dev =
container_of(led_cdev, struct ams_delta_led, cdev);
if (value)
ams_delta_latch1_write(led_dev->bitmask, led_dev->bitmask);
else
ams_delta_latch1_write(led_dev->bitmask, 0);
}
static struct ams_delta_led ams_delta_leds[] = {
{
.cdev = {
.name = "ams-delta:camera",
.brightness_set = ams_delta_led_set,
},
.bitmask = AMS_DELTA_LATCH1_LED_CAMERA,
},
{
.cdev = {
.name = "ams-delta:advert",
.brightness_set = ams_delta_led_set,
},
.bitmask = AMS_DELTA_LATCH1_LED_ADVERT,
},
{
.cdev = {
.name = "ams-delta:email",
.brightness_set = ams_delta_led_set,
},
.bitmask = AMS_DELTA_LATCH1_LED_EMAIL,
},
{
.cdev = {
.name = "ams-delta:handsfree",
.brightness_set = ams_delta_led_set,
},
.bitmask = AMS_DELTA_LATCH1_LED_HANDSFREE,
},
{
.cdev = {
.name = "ams-delta:voicemail",
.brightness_set = ams_delta_led_set,
},
.bitmask = AMS_DELTA_LATCH1_LED_VOICEMAIL,
},
{
.cdev = {
.name = "ams-delta:voice",
.brightness_set = ams_delta_led_set,
},
.bitmask = AMS_DELTA_LATCH1_LED_VOICE,
},
};
#ifdef CONFIG_PM
static int ams_delta_led_suspend(struct platform_device *dev,
pm_message_t state)
{
int i;
for (i = 0; i < ARRAY_SIZE(ams_delta_leds); i++)
led_classdev_suspend(&ams_delta_leds[i].cdev);
return 0;
}
static int ams_delta_led_resume(struct platform_device *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(ams_delta_leds); i++)
led_classdev_resume(&ams_delta_leds[i].cdev);
return 0;
}
#else
#define ams_delta_led_suspend NULL
#define ams_delta_led_resume NULL
#endif
static int ams_delta_led_probe(struct platform_device *pdev)
{
int i;
int ret;
for (i = ret = 0; ret >= 0 && i < ARRAY_SIZE(ams_delta_leds); i++) {
ret = led_classdev_register(&pdev->dev,
&ams_delta_leds[i].cdev);
}
if (ret < 0 && i > 1) {
for (i = i - 2; i >= 0; i--)
led_classdev_unregister(&ams_delta_leds[i].cdev);
}
return ret;
}
static int ams_delta_led_remove(struct platform_device *pdev)
{
int i;
for (i = ARRAY_SIZE(ams_delta_leds) - 1; i >= 0; i--)
led_classdev_unregister(&ams_delta_leds[i].cdev);
return 0;
}
static struct platform_driver ams_delta_led_driver = {
.probe = ams_delta_led_probe,
.remove = ams_delta_led_remove,
.suspend = ams_delta_led_suspend,
.resume = ams_delta_led_resume,
.driver = {
.name = "ams-delta-led",
},
};
static int __init ams_delta_led_init(void)
{
return platform_driver_register(&ams_delta_led_driver);
}
static void __exit ams_delta_led_exit(void)
{
return platform_driver_unregister(&ams_delta_led_driver);
}
module_init(ams_delta_led_init);
module_exit(ams_delta_led_exit);
MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
MODULE_DESCRIPTION("Amstrad Delta LED driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment