ARM: orion5x: Convert pr_warning to pr_warn

Use the more common pr_warn.

Other miscellanea:

o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/b438c7c54306f095a150e50df41fbba4d515c2f8.1410632835.git.joe@perches.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/mach-orion5x/dns323-setup.c

@@ -550,7 +550,7 @@ static int __init dns323_identify_rev(void)
 			break;
 	}
 	if (i >= 1000) {
-		pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n");
+		pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n");
 		return DNS323_REV_B1;
 	}
 	writel((3 << 21)	/* phy ID reg */ |
@@ -562,7 +562,7 @@ static int __init dns323_identify_rev(void)
 			break;
 	}
 	if (i >= 1000) {
-		pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n");
+		pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n");
 		return DNS323_REV_B1;
 	}
 	pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
@@ -577,7 +577,7 @@ static int __init dns323_identify_rev(void)
 	case 0x0e10: /* MV88E1118 */
 		return DNS323_REV_C1;
 	default:
-		pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
+		pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
 			reg & 0xffff);
 	}
 	return DNS323_REV_B1;

arch/arm/mach-orion5x/terastation_pro2-setup.c

@@ -349,7 +349,7 @@ static void __init tsp2_init(void)
 			gpio_free(TSP2_RTC_GPIO);
 	}
 	if (tsp2_i2c_rtc.irq == 0)
-		pr_warning("tsp2_init: failed to get RTC IRQ\n");
+		pr_warn("tsp2_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
 
 	/* register Terastation Pro II specific power-off method */

arch/arm/mach-orion5x/ts209-setup.c

@@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
 			gpio_free(TS209_RTC_GPIO);
 	}
 	if (qnap_ts209_i2c_rtc.irq == 0)
-		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
+		pr_warn("qnap_ts209_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
 	/* register tsx09 specific power-off method */

arch/arm/mach-orion5x/ts409-setup.c

@@ -302,7 +302,7 @@ static void __init qnap_ts409_init(void)
 			gpio_free(TS409_RTC_GPIO);
 	}
 	if (qnap_ts409_i2c_rtc.irq == 0)
-		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
+		pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
 	platform_device_register(&ts409_leds);
 

arch/arm/mach-orion5x/ts78xx-setup.c

@@ -403,7 +403,7 @@ static void ts78xx_fpga_supports(void)
 		/* enable devices if magic matches */
 		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
 		case TS7800_FPGA_MAGIC:
-			pr_warning("unrecognised FPGA revision 0x%.2x\n",
+			pr_warn("unrecognised FPGA revision 0x%.2x\n",
 				ts78xx_fpga.id & 0xff);
 			ts78xx_fpga.supports.ts_rtc.present = 1;
 			ts78xx_fpga.supports.ts_nand.present = 1;