Skip to content

L
linux
Commit 9f7f00cd authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Greg Kroah-Hartman
Browse files
Options

Staging: rtl8192su: remove unused files 

Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 0f29f587
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 4630 deletions
drivers/staging/rtl8192su/r8190_rtl8256.c deleted 100644 → 0
View file @ 0f29f587
/*
This is part of the rtl8192 driver
released under the GPL (See file COPYING for details).
This files contains programming code for the rtl8256
radio frontend.
*Many* thanks to Realtek Corp. for their great support!
*/
#include "r8192U.h"
#include "r8192U_hw.h"
#include "r819xU_phyreg.h"
#include "r819xU_phy.h"
#include "r8190_rtl8256.h"
/*--------------------------------------------------------------------------
* Overview: set RF band width (20M or 40M)
* Input: struct net_device* dev
* WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M
* Output: NONE
* Return: NONE
* Note: 8226 support both 20M and 40 MHz
*---------------------------------------------------------------------------*/
void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) //20M or 40M
{
u8 eRFPath;
struct r8192_priv *priv = ieee80211_priv(dev);
//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
for(eRFPath = 0; eRFPath <RF90_PATH_MAX; eRFPath++)
{
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
switch(Bandwidth)
{
case HT_CHANNEL_WIDTH_20:
if(priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B)// 8256 D-cut, E-cut, xiong: consider it later!
{
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021);
//cosa add for sd3's request 01/23/2008
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
}
else
{
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
}
break;
case HT_CHANNEL_WIDTH_20_40:
if(priv->card_8192_version == VERSION_819xU_A ||priv->card_8192_version == VERSION_819xU_B)// 8256 D-cut, E-cut, xiong: consider it later!
{
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
//cosa add for sd3's request 01/23/2008
if(priv->chan == 3 || priv->chan == 9) //I need to set priv->chan whenever current channel changes
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
else
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
}
else
{
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
}
break;
default:
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth );
break;
}
}
return;
}
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
*---------------------------------------------------------------------------*/
void PHY_RF8256_Config(struct net_device* dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
// Initialize general global value
//
// TODO: Extend RF_PATH_C and RF_PATH_D in the future
priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH;
// Config BB and RF
phy_RF8256_Config_ParaFile(dev);
return;
}
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
*---------------------------------------------------------------------------*/
void phy_RF8256_Config_ParaFile(struct net_device* dev)
{
u32 u4RegValue = 0;
//static s1Byte szRadioAFile[] = RTL819X_PHY_RADIO_A;
//static s1Byte szRadioBFile[] = RTL819X_PHY_RADIO_B;
//static s1Byte szRadioCFile[] = RTL819X_PHY_RADIO_C;
//static s1Byte szRadioDFile[] = RTL819X_PHY_RADIO_D;
u8 eRFPath;
BB_REGISTER_DEFINITION_T *pPhyReg;
struct r8192_priv *priv = ieee80211_priv(dev);
u32 RegOffSetToBeCheck = 0x3;
u32 RegValueToBeCheck = 0x7f1;
u32 RF3_Final_Value = 0;
u8 ConstRetryTimes = 5, RetryTimes = 5;
u8 ret = 0;
//3//-----------------------------------------------------------------
//3// <2> Initialize RF
//3//-----------------------------------------------------------------
for(eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++)
{
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
pPhyReg = &priv->PHYRegDef[eRFPath];
// Joseph test for shorten RF config
// pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
/*----Store original RFENV control type----*/
switch(eRFPath)
{
case RF90_PATH_A:
case RF90_PATH_C:
u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
break;
case RF90_PATH_B :
case RF90_PATH_D:
u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
break;
}
/*----Set RF_ENV enable----*/
rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
/*----Set RF_ENV output high----*/
rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
/* Set bit number of Address and Data for RF register */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
/*----Check RF block (for FPGA platform only)----*/
// TODO: this function should be removed on ASIC , Emily 2007.2.2
if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath))
{
RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
RetryTimes = ConstRetryTimes;
RF3_Final_Value = 0;
/*----Initialize RF fom connfiguration file----*/
switch(eRFPath)
{
case RF90_PATH_A:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_B:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_C:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_D:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
}
/*----Restore RFENV control type----*/;
switch(eRFPath)
{
case RF90_PATH_A:
case RF90_PATH_C:
rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
break;
case RF90_PATH_B :
case RF90_PATH_D:
rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
break;
}
if(ret){
RT_TRACE(COMP_ERR, "phy_RF8256_Config_ParaFile():Radio[%d] Fail!!", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
}
RT_TRACE(COMP_PHY, "PHY Initialization Success\n") ;
return ;
phy_RF8256_Config_ParaFile_Fail:
RT_TRACE(COMP_ERR, "PHY Initialization failed\n") ;
return ;
}
void PHY_SetRF8256CCKTxPower(struct net_device* dev, u8 powerlevel)
{
u32 TxAGC=0;
struct r8192_priv *priv = ieee80211_priv(dev);
//modified by vivi, 20080109
TxAGC = powerlevel;
if(priv->bDynamicTxLowPower == TRUE ) //cosa 05/22/2008 for scan
{
if(priv->CustomerID == RT_CID_819x_Netcore)
TxAGC = 0x22;
else
TxAGC += priv->CckPwEnl;
}
if(TxAGC > 0x24)
TxAGC = 0x24;
rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
}
void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
//Joseph TxPower for 8192 testing
u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
u8 index = 0;
u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
u8 byte0, byte1, byte2, byte3;
powerBase0 = powerlevel + priv->TxPowerDiff; //OFDM rates
powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0;
powerBase1 = powerlevel; //MCS rates
powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1;
for(index=0; index<6; index++)
{
writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index<2)?powerBase0:powerBase1);
byte0 = (u8)(writeVal & 0x7f);
byte1 = (u8)((writeVal & 0x7f00)>>8);
byte2 = (u8)((writeVal & 0x7f0000)>>16);
byte3 = (u8)((writeVal & 0x7f000000)>>24);
if(byte0 > 0x24) // Max power index = 0x24
byte0 = 0x24;
if(byte1 > 0x24)
byte1 = 0x24;
if(byte2 > 0x24)
byte2 = 0x24;
if(byte3 > 0x24)
byte3 = 0x24;
//for tx power track
if(index == 3)
{
writeVal_tmp = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
priv->Pwr_Track = writeVal_tmp;
}
if(priv->bDynamicTxHighPower == TRUE) //Add by Jacken 2008/03/06
{
// Emily, 20080613. Set low tx power for both MCS and legacy OFDM
writeVal = 0x03030303;
}
else
{
writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
}
rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
}
return;
}
drivers/staging/rtl8192su/r8192U_hw.h deleted 100644 → 0
View file @ 0f29f587
/*
This is part of rtl8187 OpenSource driver.
Copyright (C) Andrea Merello 2004-2005 <andreamrl@tiscali.it>
Released under the terms of GPL (General Public Licence)
Parts of this driver are based on the GPL part of the
official Realtek driver.
Parts of this driver are based on the rtl8180 driver skeleton
from Patric Schenke & Andres Salomon.
Parts of this driver are based on the Intel Pro Wireless
2100 GPL driver.
We want to tanks the Authors of those projects
and the Ndiswrapper project Authors.
*/
/* Mariusz Matuszek added full registers definition with Realtek's name */
/* this file contains register definitions for the rtl8187 MAC controller */
#ifndef R8192_HW
#define R8192_HW
typedef enum _VERSION_819xU{
VERSION_819xU_A, // A-cut
VERSION_819xU_B, // B-cut
VERSION_819xU_C,// C-cut
}VERSION_819xU,*PVERSION_819xU;
//added for different RF type
typedef enum _RT_RF_TYPE_DEF
{
RF_1T2R = 0,
RF_2T4R,
RF_819X_MAX_TYPE
}RT_RF_TYPE_DEF;
typedef enum _BaseBand_Config_Type{
BaseBand_Config_PHY_REG = 0, //Radio Path A
BaseBand_Config_AGC_TAB = 1, //Radio Path B
}BaseBand_Config_Type, *PBaseBand_Config_Type;
#if 0
typedef enum _RT_RF_TYPE_819xU{
RF_TYPE_MIN = 0,
RF_8225,
RF_8256,
RF_8258,
RF_PSEUDO_11N = 4,
}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
#endif
#define RTL8187_REQT_READ 0xc0
#define RTL8187_REQT_WRITE 0x40
#define RTL8187_REQ_GET_REGS 0x05
#define RTL8187_REQ_SET_REGS 0x05
#define MAX_TX_URB 16 //less URB will cause 2.4.31 crash, need to fix it further
#define MAX_RX_URB 16
#define R8180_MAX_RETRY 255
//#define MAX_RX_NORMAL_URB 3
//#define MAX_RX_COMMAND_URB 2
#define RX_URB_SIZE 9100
#define BB_ANTATTEN_CHAN14 0x0c
#define BB_ANTENNA_B 0x40
#define BB_HOST_BANG (1<<30)
#define BB_HOST_BANG_EN (1<<2)
#define BB_HOST_BANG_CLK (1<<1)
#define BB_HOST_BANG_RW (1<<3)
#define BB_HOST_BANG_DATA 1
//#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920)
#define AFR 0x010
#define AFR_CardBEn (1<<0)
#define AFR_CLKRUN_SEL (1<<1)
#define AFR_FuncRegEn (1<<2)
#define RTL8190_EEPROM_ID 0x8129
#define EEPROM_VID 0x02
#define EEPROM_PID 0x04
#define EEPROM_NODE_ADDRESS_BYTE_0 0x0C
#define EEPROM_TxPowerDiff 0x1F
#define EEPROM_ThermalMeter 0x20
#define EEPROM_PwDiff 0x21 //0x21
#define EEPROM_CrystalCap 0x22 //0x22
#define EEPROM_TxPwIndex_CCK 0x23 //0x23
#define EEPROM_TxPwIndex_OFDM_24G 0x24 //0x24~0x26
#define EEPROM_TxPwIndex_CCK_V1 0x29 //0x29~0x2B
#define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C //0x2C~0x2E
#define EEPROM_TxPwIndex_Ver 0x27 //0x27
#define EEPROM_Default_TxPowerDiff 0x0
#define EEPROM_Default_ThermalMeter 0x7
#define EEPROM_Default_PwDiff 0x4
#define EEPROM_Default_CrystalCap 0x5
#define EEPROM_Default_TxPower 0x1010
#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID
#define EEPROM_ChannelPlan 0x16 //0x7C
#define EEPROM_IC_VER 0x7d //0x7D
#define EEPROM_CRC 0x7e //0x7E~0x7F
#define EEPROM_CID_DEFAULT 0x0
#define EEPROM_CID_CAMEO 0x1
#define EEPROM_CID_RUNTOP 0x2
#define EEPROM_CID_Senao 0x3
#define EEPROM_CID_TOSHIBA 0x4 // Toshiba setting, Merge by Jacken, 2008/01/31
#define EEPROM_CID_NetCore 0x5
#define EEPROM_CID_Nettronix 0x6
#define EEPROM_CID_Pronet 0x7
#define EEPROM_CID_DLINK 0x8
#define AC_PARAM_TXOP_LIMIT_OFFSET 16
#define AC_PARAM_ECW_MAX_OFFSET 12
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
//#endif
enum _RTL8192Usb_HW {
PCIF = 0x009, // PCI Function Register 0x0009h~0x000bh
#define BB_GLOBAL_RESET_BIT 0x1
BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register
BSSIDR = 0x02E, // BSSID Register
CMDR = 0x037, // Command register
#define CR_RST 0x10
#define CR_RE 0x08
#define CR_TE 0x04
#define CR_MulRW 0x01
SIFS = 0x03E, // SIFS register
TCR = 0x040, // Transmit Configuration Register
#define TCR_MXDMA_2048 7
#define TCR_LRL_OFFSET 0
#define TCR_SRL_OFFSET 8
#define TCR_MXDMA_OFFSET 21
#define TCR_SAT BIT24 // Enable Rate depedent ack timeout timer
RCR = 0x044, // Receive Configuration Register
#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
#define RX_FIFO_THRESHOLD_SHIFT 13
#define RX_FIFO_THRESHOLD_128 3
#define RX_FIFO_THRESHOLD_256 4
#define RX_FIFO_THRESHOLD_512 5
#define RX_FIFO_THRESHOLD_1024 6
#define RX_FIFO_THRESHOLD_NONE 7
#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
#define RCR_MXDMA_OFFSET 8
#define RCR_FIFO_OFFSET 13
#define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size.
#define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2
#define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1
#define RCR_ENMBID BIT27 // Enable Multiple BssId.
#define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames
#define RCR_CBSSID BIT23 // Accept BSSID match packet
#define RCR_APWRMGT BIT22 // Accept power management packet
#define RCR_ADD3 BIT21 // Accept address 3 match packet
#define RCR_AMF BIT20 // Accept management type frame
#define RCR_ACF BIT19 // Accept control type frame
#define RCR_ADF BIT18 // Accept data type frame
#define RCR_RXFTH BIT13 // Rx FIFO Threshold
#define RCR_AICV BIT12 // Accept ICV error packet
#define RCR_ACRC32 BIT5 // Accept CRC32 error packet
#define RCR_AB BIT3 // Accept broadcast packet
#define RCR_AM BIT2 // Accept multicast packet
#define RCR_APM BIT1 // Accept physical match packet
#define RCR_AAP BIT0 // Accept all unicast packet
SLOT_TIME = 0x049, // Slot Time Register
ACK_TIMEOUT = 0x04c, // Ack Timeout Register
PIFS_TIME = 0x04d, // PIFS time
USTIME = 0x04e, // Microsecond Tuning Register, Sets the microsecond time unit used by MAC clock.
EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE
EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK
EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO
EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI
RFPC = 0x05F, // Rx FIFO Packet Count
CWRR = 0x060, // Contention Window Report Register
BCN_TCFG = 0x062, // Beacon Time Configuration
#define BCN_TCFG_CW_SHIFT 8
#define BCN_TCFG_IFS 0
BCN_INTERVAL = 0x070, // Beacon Interval (TU)
ATIMWND = 0x072, // ATIM Window Size (TU)
BCN_DRV_EARLY_INT = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT
BCN_DMATIME = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA
BCN_ERR_THRESH = 0x078, // Beacon Error Threshold
RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd
WCAMI = 0x0A4, // Software write CAM input content
RCAMO = 0x0A8, // Software read/write CAM config
SECR = 0x0B0, //Security Configuration Register
#define SCR_TxUseDK BIT0 //Force Tx Use Default Key
#define SCR_RxUseDK BIT1 //Force Rx Use Default Key
#define SCR_TxEncEnable BIT2 //Enable Tx Encryption
#define SCR_RxDecEnable BIT3 //Enable Rx Decryption
#define SCR_SKByA2 BIT4 //Search kEY BY A2
#define SCR_NoSKMC BIT5 //No Key Search for Multicast
#define SCR_UseDK 0x01
#define SCR_TxSecEnable 0x02
#define SCR_RxSecEnable 0x04
TPPoll = 0x0fd, // Transmit priority polling register
PSR = 0x0ff, // Page Select Register
#define CPU_CCK_LOOPBACK 0x00030000
#define CPU_GEN_SYSTEM_RESET 0x00000001
#define CPU_GEN_FIRMWARE_RESET 0x00000008
#define CPU_GEN_BOOT_RDY 0x00000010
#define CPU_GEN_FIRM_RDY 0x00000020
#define CPU_GEN_PUT_CODE_OK 0x00000080
#define CPU_GEN_BB_RST 0x00000100
#define CPU_GEN_PWR_STB_CPU 0x00000004
#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
//----------------------------------------------------------------------------
// 8190 CPU General Register (offset 0x100, 4 byte)
//----------------------------------------------------------------------------
#define CPU_CCK_LOOPBACK 0x00030000
#define CPU_GEN_SYSTEM_RESET 0x00000001
#define CPU_GEN_FIRMWARE_RESET 0x00000008
#define CPU_GEN_BOOT_RDY 0x00000010
#define CPU_GEN_FIRM_RDY 0x00000020
#define CPU_GEN_PUT_CODE_OK 0x00000080
#define CPU_GEN_BB_RST 0x00000100
#define CPU_GEN_PWR_STB_CPU 0x00000004
#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
CPU_GEN = 0x100, // CPU Reset Register
LED1Cfg = 0x154,// LED1 Configuration Register
LED0Cfg = 0x155,// LED0 Configuration Register
AcmAvg = 0x170, // ACM Average Period Register
AcmHwCtrl = 0x171, // ACM Hardware Control Register
//----------------------------------------------------------------------------
////
//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
////----------------------------------------------------------------------------
//
#define AcmHw_HwEn BIT0
#define AcmHw_BeqEn BIT1
#define AcmHw_ViqEn BIT2
#define AcmHw_VoqEn BIT3
#define AcmHw_BeqStatus BIT4
#define AcmHw_ViqStatus BIT5
#define AcmHw_VoqStatus BIT6
AcmFwCtrl = 0x172, // ACM Firmware Control Register
AES_11N_FIX = 0x173,
VOAdmTime = 0x174, // VO Queue Admitted Time Register
VIAdmTime = 0x178, // VI Queue Admitted Time Register
BEAdmTime = 0x17C, // BE Queue Admitted Time Register
RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk
RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High
RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public,
// QPRR = 0x1E0, // Queue Page Report per TID
QPNR = 0x1D0, //0x1F0, // Queue Packet Number report per TID
BQDA = 0x200, // Beacon Queue Descriptor Address
HQDA = 0x204, // High Priority Queue Descriptor Address
CQDA = 0x208, // Command Queue Descriptor Address
MQDA = 0x20C, // Management Queue Descriptor Address
HCCAQDA = 0x210, // HCCA Queue Descriptor Address
VOQDA = 0x214, // VO Queue Descriptor Address
VIQDA = 0x218, // VI Queue Descriptor Address
BEQDA = 0x21C, // BE Queue Descriptor Address
BKQDA = 0x220, // BK Queue Descriptor Address
RCQDA = 0x224, // Receive command Queue Descriptor Address
RDQDA = 0x228, // Receive Queue Descriptor Start Address
MAR0 = 0x240, // Multicast filter.
MAR4 = 0x244,
CCX_PERIOD = 0x250, // CCX Measurement Period Register, in unit of TU.
CLM_RESULT = 0x251, // CCA Busy fraction register.
NHM_PERIOD = 0x252, // NHM Measurement Period register, in unit of TU.
NHM_THRESHOLD0 = 0x253, // Noise Histogram Meashorement0.
NHM_THRESHOLD1 = 0x254, // Noise Histogram Meashorement1.
NHM_THRESHOLD2 = 0x255, // Noise Histogram Meashorement2.
NHM_THRESHOLD3 = 0x256, // Noise Histogram Meashorement3.
NHM_THRESHOLD4 = 0x257, // Noise Histogram Meashorement4.
NHM_THRESHOLD5 = 0x258, // Noise Histogram Meashorement5.
NHM_THRESHOLD6 = 0x259, // Noise Histogram Meashorement6
MCTRL = 0x25A, // Measurement Control
NHM_RPI_COUNTER0 = 0x264, // Noise Histogram RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
NHM_RPI_COUNTER1 = 0x265, // Noise Histogram RPI counter1, the fraction of signal strength in (NHM_THRESHOLD0, NHM_THRESHOLD1].
NHM_RPI_COUNTER2 = 0x266, // Noise Histogram RPI counter2, the fraction of signal strength in (NHM_THRESHOLD1, NHM_THRESHOLD2].
NHM_RPI_COUNTER3 = 0x267, // Noise Histogram RPI counter3, the fraction of signal strength in (NHM_THRESHOLD2, NHM_THRESHOLD3].
NHM_RPI_COUNTER4 = 0x268, // Noise Histogram RPI counter4, the fraction of signal strength in (NHM_THRESHOLD3, NHM_THRESHOLD4].
NHM_RPI_COUNTER5 = 0x269, // Noise Histogram RPI counter5, the fraction of signal strength in (NHM_THRESHOLD4, NHM_THRESHOLD5].
NHM_RPI_COUNTER6 = 0x26A, // Noise Histogram RPI counter6, the fraction of signal strength in (NHM_THRESHOLD5, NHM_THRESHOLD6].
NHM_RPI_COUNTER7 = 0x26B, // Noise Histogram RPI counter7, the fraction of signal strength in (NHM_THRESHOLD6, NHM_THRESHOLD7].
#define BW_OPMODE_11J BIT0
#define BW_OPMODE_5G BIT1
#define BW_OPMODE_20MHZ BIT2
BW_OPMODE = 0x300, // Bandwidth operation mode
MSR = 0x303, // Media Status register
#define MSR_LINK_MASK ((1<<0)|(1<<1))
#define MSR_LINK_MANAGED 2
#define MSR_LINK_NONE 0
#define MSR_LINK_SHIFT 0
#define MSR_LINK_ADHOC 1
#define MSR_LINK_MASTER 3
#define MSR_LINK_ENEDCA (1<<4)
RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long
#define RETRY_LIMIT_SHORT_SHIFT 8
#define RETRY_LIMIT_LONG_SHIFT 0
TSFR = 0x308,
RRSR = 0x310, // Response Rate Set
#define RRSR_RSC_OFFSET 21
#define RRSR_SHORT_OFFSET 23
#define RRSR_RSC_DUPLICATE 0x600000
#define RRSR_RSC_LOWSUBCHNL 0x400000
#define RRSR_RSC_UPSUBCHANL 0x200000
#define RRSR_SHORT 0x800000
#define RRSR_1M BIT0
#define RRSR_2M BIT1
#define RRSR_5_5M BIT2
#define RRSR_11M BIT3
#define RRSR_6M BIT4
#define RRSR_9M BIT5
#define RRSR_12M BIT6
#define RRSR_18M BIT7
#define RRSR_24M BIT8
#define RRSR_36M BIT9
#define RRSR_48M BIT10
#define RRSR_54M BIT11
#define RRSR_MCS0 BIT12
#define RRSR_MCS1 BIT13
#define RRSR_MCS2 BIT14
#define RRSR_MCS3 BIT15
#define RRSR_MCS4 BIT16
#define RRSR_MCS5 BIT17
#define RRSR_MCS6 BIT18
#define RRSR_MCS7 BIT19
#define BRSR_AckShortPmb BIT23 // CCK ACK: use Short Preamble or not.
RATR0 = 0x320, // Rate Adaptive Table register1
UFWP = 0x318,
DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI
//----------------------------------------------------------------------------
// 8190 Rate Adaptive Table Register (offset 0x320, 4 byte)
//----------------------------------------------------------------------------
//CCK
#define RATR_1M 0x00000001
#define RATR_2M 0x00000002
#define RATR_55M 0x00000004
#define RATR_11M 0x00000008
//OFDM
#define RATR_6M 0x00000010
#define RATR_9M 0x00000020
#define RATR_12M 0x00000040
#define RATR_18M 0x00000080
#define RATR_24M 0x00000100
#define RATR_36M 0x00000200
#define RATR_48M 0x00000400
#define RATR_54M 0x00000800
//MCS 1 Spatial Stream
#define RATR_MCS0 0x00001000
#define RATR_MCS1 0x00002000
#define RATR_MCS2 0x00004000
#define RATR_MCS3 0x00008000
#define RATR_MCS4 0x00010000
#define RATR_MCS5 0x00020000
#define RATR_MCS6 0x00040000
#define RATR_MCS7 0x00080000
//MCS 2 Spatial Stream
#define RATR_MCS8 0x00100000
#define RATR_MCS9 0x00200000
#define RATR_MCS10 0x00400000
#define RATR_MCS11 0x00800000
#define RATR_MCS12 0x01000000
#define RATR_MCS13 0x02000000
#define RATR_MCS14 0x04000000
#define RATR_MCS15 0x08000000
// ALL CCK Rate
#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\
|RATR_36M|RATR_48M|RATR_54M
#define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \
RATR_MCS4|RATR_MCS5|RATR_MCS6|RATR_MCS7
#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \
RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
MCS_TXAGC = 0x340, // MCS AGC
CCK_TXAGC = 0x348, // CCK AGC
// ISR = 0x350, // Interrupt Status Register
// IMR = 0x354, // Interrupt Mask Register
// IMR_POLL = 0x360,
MacBlkCtrl = 0x403, // Mac block on/off control register
EPROM_CMD = 0xfe58,
#define Cmd9346CR_9356SEL (1<<4)
#define EPROM_CMD_RESERVED_MASK (1<<5)
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
#define EPROM_CMD_CONFIG 0x3
#define EPROM_CMD_NORMAL 0
#define EPROM_CMD_LOAD 1
#define EPROM_CMD_PROGRAM 2
#define EPROM_CS_SHIFT 3
#define EPROM_CK_SHIFT 2
#define EPROM_W_SHIFT 1
#define EPROM_R_SHIFT 0
MAC0 = 0x000,
MAC1 = 0x001,
MAC2 = 0x002,
MAC3 = 0x003,
MAC4 = 0x004,
MAC5 = 0x005,
#if 0
/* 0x0006 - 0x0007 - reserved */
RXFIFOCOUNT = 0x010,
TXFIFOCOUNT = 0x012,
BQREQ = 0x013,
/* 0x0010 - 0x0017 - reserved */
TSFTR = 0x018,
TLPDA = 0x020,
TNPDA = 0x024,
THPDA = 0x028,
BSSID = 0x02E,
RESP_RATE = 0x034,
CMD = 0x037,
#define CMD_RST_SHIFT 4
#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7))
#define CMD_RX_ENABLE_SHIFT 3
#define CMD_TX_ENABLE_SHIFT 2
#define CR_RST ((1<< 4))
#define CR_RE ((1<< 3))
#define CR_TE ((1<< 2))
#define CR_MulRW ((1<< 0))
INTA_MASK = 0x03c,
INTA = 0x03e,
#define INTA_TXOVERFLOW (1<<15)
#define INTA_TIMEOUT (1<<14)
#define INTA_BEACONTIMEOUT (1<<13)
#define INTA_ATIM (1<<12)
#define INTA_BEACONDESCERR (1<<11)
#define INTA_BEACONDESCOK (1<<10)
#define INTA_HIPRIORITYDESCERR (1<<9)
#define INTA_HIPRIORITYDESCOK (1<<8)
#define INTA_NORMPRIORITYDESCERR (1<<7)
#define INTA_NORMPRIORITYDESCOK (1<<6)
#define INTA_RXOVERFLOW (1<<5)
#define INTA_RXDESCERR (1<<4)
#define INTA_LOWPRIORITYDESCERR (1<<3)
#define INTA_LOWPRIORITYDESCOK (1<<2)
#define INTA_RXCRCERR (1<<1)
#define INTA_RXOK (1)
TX_CONF = 0x040,
#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
#define TX_LOOPBACK_SHIFT 17
#define TX_LOOPBACK_MAC 1
#define TX_LOOPBACK_BASEBAND 2
#define TX_LOOPBACK_NONE 0
#define TX_LOOPBACK_CONTINUE 3
#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
#define TX_LRLRETRY_SHIFT 0
#define TX_SRLRETRY_SHIFT 8
#define TX_NOICV_SHIFT 19
#define TX_NOCRC_SHIFT 16
#define TCR_DurProcMode ((1<<30))
#define TCR_DISReqQsize ((1<<28))
#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25))
#define TCR_HWVERID_SHIFT 25
#define TCR_SWPLCPLEN ((1<<24))
#define TCR_PLCP_LEN TCR_SAT // rtl8180
#define TCR_MXDMA_MASK ((1<<23)|(1<<22)|(1<<21))
#define TCR_MXDMA_1024 6
#define TCR_MXDMA_2048 7
#define TCR_MXDMA_SHIFT 21
#define TCR_DISCW ((1<<20))
#define TCR_ICV ((1<<19))
#define TCR_LBK ((1<<18)|(1<<17))
#define TCR_LBK1 ((1<<18))
#define TCR_LBK0 ((1<<17))
#define TCR_CRC ((1<<16))
#define TCR_SRL_MASK ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8))
#define TCR_LRL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7))
#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185
RX_CONF = 0x044,
#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
#define RX_CHECK_BSSID_SHIFT 23
#define ACCEPT_PWR_FRAME_SHIFT 22
#define ACCEPT_MNG_FRAME_SHIFT 20
#define ACCEPT_CTL_FRAME_SHIFT 19
#define ACCEPT_DATA_FRAME_SHIFT 18
#define ACCEPT_ICVERR_FRAME_SHIFT 12
#define ACCEPT_CRCERR_FRAME_SHIFT 5
#define ACCEPT_BCAST_FRAME_SHIFT 3
#define ACCEPT_MCAST_FRAME_SHIFT 2
#define ACCEPT_ALLMAC_FRAME_SHIFT 0
#define ACCEPT_NICMAC_FRAME_SHIFT 1
#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
#define RX_FIFO_THRESHOLD_SHIFT 13
#define RX_FIFO_THRESHOLD_128 3
#define RX_FIFO_THRESHOLD_256 4
#define RX_FIFO_THRESHOLD_512 5
#define RX_FIFO_THRESHOLD_1024 6
#define RX_FIFO_THRESHOLD_NONE 7
#define RX_AUTORESETPHY_SHIFT 28
#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
#define MAX_RX_DMA_2048 7
#define MAX_RX_DMA_1024 6
#define MAX_RX_DMA_SHIFT 10
#define RCR_ONLYERLPKT ((1<<31))
#define RCR_CS_SHIFT 29
#define RCR_CS_MASK ((1<<30) | (1<<29))
#define RCR_ENMARP ((1<<28))
#define RCR_CBSSID ((1<<23))
#define RCR_APWRMGT ((1<<22))
#define RCR_ADD3 ((1<<21))
#define RCR_AMF ((1<<20))
#define RCR_ACF ((1<<19))
#define RCR_ADF ((1<<18))
#define RCR_RXFTH ((1<<15)|(1<<14)|(1<<13))
#define RCR_RXFTH2 ((1<<15))
#define RCR_RXFTH1 ((1<<14))
#define RCR_RXFTH0 ((1<<13))
#define RCR_AICV ((1<<12))
#define RCR_MXDMA ((1<<10)|(1<< 9)|(1<< 8))
#define RCR_MXDMA2 ((1<<10))
#define RCR_MXDMA1 ((1<< 9))
#define RCR_MXDMA0 ((1<< 8))
#define RCR_9356SEL ((1<< 6))
#define RCR_ACRC32 ((1<< 5))
#define RCR_AB ((1<< 3))
#define RCR_AM ((1<< 2))
#define RCR_APM ((1<< 1))
#define RCR_AAP ((1<< 0))
INT_TIMEOUT = 0x048,
TX_BEACON_RING_ADDR = 0x04c,
EPROM_CMD = 0x58,
#define EPROM_CMD_RESERVED_MASK ((1<<5)|(1<<4))
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
#define EPROM_CMD_CONFIG 0x3
#define EPROM_CMD_NORMAL 0
#define EPROM_CMD_LOAD 1
#define EPROM_CMD_PROGRAM 2
#define EPROM_CS_SHIFT 3
#define EPROM_CK_SHIFT 2
#define EPROM_W_SHIFT 1
#define EPROM_R_SHIFT 0
CONFIG0 = 0x051,
#define CONFIG0_WEP104 ((1<<6))
#define CONFIG0_LEDGPO_En ((1<<4))
#define CONFIG0_Aux_Status ((1<<3))
#define CONFIG0_GL ((1<<1)|(1<<0))
#define CONFIG0_GL1 ((1<<1))
#define CONFIG0_GL0 ((1<<0))
CONFIG1 = 0x052,
#define CONFIG1_LEDS ((1<<7)|(1<<6))
#define CONFIG1_LEDS1 ((1<<7))
#define CONFIG1_LEDS0 ((1<<6))
#define CONFIG1_LWACT ((1<<4))
#define CONFIG1_MEMMAP ((1<<3))
#define CONFIG1_IOMAP ((1<<2))
#define CONFIG1_VPD ((1<<1))
#define CONFIG1_PMEn ((1<<0))
CONFIG2 = 0x053,
#define CONFIG2_LCK ((1<<7))
#define CONFIG2_ANT ((1<<6))
#define CONFIG2_DPS ((1<<3))
#define CONFIG2_PAPE_sign ((1<<2))
#define CONFIG2_PAPE_time ((1<<1)|(1<<0))
#define CONFIG2_PAPE_time1 ((1<<1))
#define CONFIG2_PAPE_time0 ((1<<0))
ANA_PARAM = 0x054,
CONFIG3 = 0x059,
#define CONFIG3_GNTSel ((1<<7))
#define CONFIG3_PARM_En ((1<<6))
#define CONFIG3_Magic ((1<<5))
#define CONFIG3_CardB_En ((1<<3))
#define CONFIG3_CLKRUN_En ((1<<2))
#define CONFIG3_FuncRegEn ((1<<1))
#define CONFIG3_FBtbEn ((1<<0))
#define CONFIG3_CLKRUN_SHIFT 2
#define CONFIG3_ANAPARAM_W_SHIFT 6
CONFIG4 = 0x05a,
#define CONFIG4_VCOPDN ((1<<7))
#define CONFIG4_PWROFF ((1<<6))
#define CONFIG4_PWRMGT ((1<<5))
#define CONFIG4_LWPME ((1<<4))
#define CONFIG4_LWPTN ((1<<2))
#define CONFIG4_RFTYPE ((1<<1)|(1<<0))
#define CONFIG4_RFTYPE1 ((1<<1))
#define CONFIG4_RFTYPE0 ((1<<0))
TESTR = 0x05b,
#define TFPC_AC 0x05C
#define SCR 0x05F
PGSELECT = 0x05e,
#define PGSELECT_PG_SHIFT 0
SECURITY = 0x05f,
#define SECURITY_WEP_TX_ENABLE_SHIFT 1
#define SECURITY_WEP_RX_ENABLE_SHIFT 0
#define SECURITY_ENCRYP_104 1
#define SECURITY_ENCRYP_SHIFT 4
#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))
ANA_PARAM2 = 0x060,
BEACON_INTERVAL = 0x070,
#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \
(1<<6)|(1<<7)|(1<<8)|(1<<9))
ATIM_WND = 0x072,
#define ATIM_WND_MASK (0x01FF)
BCN_INTR_ITV = 0x074,
#define BCN_INTR_ITV_MASK (0x01FF)
ATIM_INTR_ITV = 0x076,
#define ATIM_INTR_ITV_MASK (0x01FF)
AckTimeOutReg = 0x079, //ACK timeout register, in unit of 4 us.
PHY_ADR = 0x07c,
PHY_READ = 0x07e,
RFPinsOutput = 0x080,
RFPinsEnable = 0x082,
//Page 0
RFPinsSelect = 0x084,
#define SW_CONTROL_GPIO 0x400
RFPinsInput = 0x086,
RF_PARA = 0x088,
RF_TIMING = 0x08c,
GP_ENABLE = 0x090,
GPIO = 0x091,
TX_AGC_CTL = 0x09c,
#define TX_AGC_CTL_PER_PACKET_TXAGC 0x01
#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0
#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1
#define TX_AGC_CTL_FEEDBACK_ANT 2
#define TXAGC_CTL_PER_PACKET_ANT_SEL 0x02
OFDM_TXAGC = 0x09e,
ANTSEL = 0x09f,
WPA_CONFIG = 0x0b0,
SIFS = 0x0b4,
DIFS = 0x0b5,
SLOT = 0x0b6,
CW_CONF = 0x0bc,
#define CW_CONF_PERPACKET_RETRY_LIMIT 0x02
#define CW_CONF_PERPACKET_CW 0x01
#define CW_CONF_PERPACKET_RETRY_SHIFT 1
#define CW_CONF_PERPACKET_CW_SHIFT 0
CW_VAL = 0x0bd,
RATE_FALLBACK = 0x0be,
#define MAX_RESP_RATE_SHIFT 4
#define MIN_RESP_RATE_SHIFT 0
#define RATE_FALLBACK_CTL_ENABLE 0x80
#define RATE_FALLBACK_CTL_AUTO_STEP0 0x00
ACM_CONTROL = 0x0BF, // ACM Control Registe
//----------------------------------------------------------------------------
// 8187B ACM_CONTROL bits (Offset 0xBF, 1 Byte)
//----------------------------------------------------------------------------
#define VOQ_ACM_EN (0x01 << 7) //BIT7
#define VIQ_ACM_EN (0x01 << 6) //BIT6
#define BEQ_ACM_EN (0x01 << 5) //BIT5
#define ACM_HW_EN (0x01 << 4) //BIT4
#define TXOPSEL (0x01 << 3) //BIT3
#define VOQ_ACM_CTL (0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time
#define VIQ_ACM_CTL (0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time
#define BEQ_ACM_CTL (0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time
CONFIG5 = 0x0D8,
#define CONFIG5_TX_FIFO_OK ((1<<7))
#define CONFIG5_RX_FIFO_OK ((1<<6))
#define CONFIG5_CALON ((1<<5))
#define CONFIG5_EACPI ((1<<2))
#define CONFIG5_LANWake ((1<<1))
#define CONFIG5_PME_STS ((1<<0))
TX_DMA_POLLING = 0x0d9,
#define TX_DMA_POLLING_BEACON_SHIFT 7
#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
#define TX_DMA_STOP_BEACON_SHIFT 3
#define TX_DMA_STOP_HIPRIORITY_SHIFT 2
#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1
#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0
CWR = 0x0DC,
RetryCTR = 0x0DE,
INT_MIG = 0x0E2, // Interrupt Migration (0xE2 ~ 0xE3)
TID_AC_MAP = 0x0E8, // TID to AC Mapping Register
ANA_PARAM3 = 0x0EE,
//page 1
Wakeup0 = 0x084,
Wakeup1 = 0x08C,
Wakeup2LD = 0x094,
Wakeup2HD = 0x09C,
Wakeup3LD = 0x0A4,
Wakeup3HD = 0x0AC,
Wakeup4LD = 0x0B4,
Wakeup4HD = 0x0BC,
CRC0 = 0x0C4,
CRC1 = 0x0C6,
CRC2 = 0x0C8,
CRC3 = 0x0CA,
CRC4 = 0x0CC,
/* 0x00CE - 0x00D3 - reserved */
RFSW_CTRL = 0x272, // 0x272-0x273.
//Reg Diff between rtl8187 and rtl8187B
/**************************************************************************/
BRSR_8187 = 0x02C,
BRSR_8187B = 0x034,
#define BRSR_BPLCP ((1<< 8))
#define BRSR_MBR ((1<< 1)|(1<< 0))
#define BRSR_MBR_8185 ((1<< 11)|(1<< 10)|(1<< 9)|(1<< 8)|(1<< 7)|(1<< 6)|(1<< 5)|(1<< 4)|(1<< 3)|(1<< 2)|(1<< 1)|(1<< 0))
#define BRSR_MBR0 ((1<< 0))
#define BRSR_MBR1 ((1<< 1))
/**************************************************************************/
EIFS_8187 = 0x035,
EIFS_8187B = 0x02D,
/**************************************************************************/
FER = 0x0F0,
FEMR = 0x0F4,
FPSR = 0x0F8,
FFER = 0x0FC,
AC_VO_PARAM = 0x0F0, // AC_VO Parameters Record
AC_VI_PARAM = 0x0F4, // AC_VI Parameters Record
AC_BE_PARAM = 0x0F8, // AC_BE Parameters Record
AC_BK_PARAM = 0x0FC, // AC_BK Parameters Record
TALLY_SEL = 0x0fc,
//----------------------------------------------------------------------------
// 8187B AC_XX_PARAM bits
//----------------------------------------------------------------------------
#define AC_PARAM_TXOP_LIMIT_OFFSET 16
#define AC_PARAM_ECW_MAX_OFFSET 12
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
#endif
};
//----------------------------------------------------------------------------
// 818xB AnaParm & AnaParm2 Register
//----------------------------------------------------------------------------
//#define ANAPARM_ASIC_ON 0x45090658
//#define ANAPARM2_ASIC_ON 0x727f3f52
#define GPI 0x108
#define GPO 0x109
#define GPE 0x10a
#endif
drivers/staging/rtl8192su/r819xU_firmware.c deleted 100644 → 0
View file @ 0f29f587
/**************************************************************************************************
* Procedure: Init boot code/firmware code/data session
*
* Description: This routine will intialize firmware. If any error occurs during the initialization
* process, the routine shall terminate immediately and return fail.
* NIC driver should call NdisOpenFile only from MiniportInitialize.
*
* Arguments: The pointer of the adapter
* Returns:
* NDIS_STATUS_FAILURE - the following initialization process should be terminated
* NDIS_STATUS_SUCCESS - if firmware initialization process success
**************************************************************************************************/
#include "r8192U.h"
#include "r8192U_hw.h"
#include "r819xU_firmware_img.h"
#include "r819xU_firmware.h"
#include <linux/firmware.h>
void firmware_init_param(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
rt_firmware *pfirmware = priv->pFirmware;
pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
}
/*
* segment the img and use the ptr and length to remember info on each segment
*
*/
bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len)
{
struct r8192_priv *priv = ieee80211_priv(dev);
bool rt_status = true;
u16 frag_threshold;
u16 frag_length, frag_offset = 0;
//u16 total_size;
int i;
rt_firmware *pfirmware = priv->pFirmware;
struct sk_buff *skb;
unsigned char *seg_ptr;
cb_desc *tcb_desc;
u8 bLastIniPkt;
firmware_init_param(dev);
//Fragmentation might be required
frag_threshold = pfirmware->cmdpacket_frag_thresold;
do {
if((buffer_len - frag_offset) > frag_threshold) {
frag_length = frag_threshold ;
bLastIniPkt = 0;
} else {
frag_length = buffer_len - frag_offset;
bLastIniPkt = 1;
}
/* Allocate skb buffer to contain firmware info and tx descriptor info
* add 4 to avoid packet appending overflow.
* */
#ifdef RTL8192U
skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
#else
skb = dev_alloc_skb(frag_length + 4);
#endif
memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->queue_index = TXCMD_QUEUE;
tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
tcb_desc->bLastIniPkt = bLastIniPkt;
#ifdef RTL8192U
skb_reserve(skb, USB_HWDESC_HEADER_LEN);
#endif
seg_ptr = skb->data;
/*
* Transform from little endian to big endian
* and pending zero
*/
for(i=0 ; i < frag_length; i+=4) {
*seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0;
*seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0;
*seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0;
*seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
}
tcb_desc->txbuf_size= (u16)i;
skb_put(skb, i);
if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
(priv->ieee80211->queue_stop) ) {
RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
} else {
priv->ieee80211->softmac_hard_start_xmit(skb,dev);
}
code_virtual_address += frag_length;
frag_offset += frag_length;
}while(frag_offset < buffer_len);
return rt_status;
#if 0
cmdsend_downloadcode_fail:
rt_status = false;
RT_TRACE(COMP_ERR, "CmdSendDownloadCode fail !!\n");
return rt_status;
#endif
}
bool
fwSendNullPacket(
struct net_device *dev,
u32 Length
)
{
bool rtStatus = true;
struct r8192_priv *priv = ieee80211_priv(dev);
struct sk_buff *skb;
cb_desc *tcb_desc;
unsigned char *ptr_buf;
bool bLastInitPacket = false;
//PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
//Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
skb = dev_alloc_skb(Length+ 4);
memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->queue_index = TXCMD_QUEUE;
tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
tcb_desc->bLastIniPkt = bLastInitPacket;
ptr_buf = skb_put(skb, Length);
memset(ptr_buf,0,Length);
tcb_desc->txbuf_size= (u16)Length;
if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
(priv->ieee80211->queue_stop) ) {
RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n");
skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
} else {
priv->ieee80211->softmac_hard_start_xmit(skb,dev);
}
//PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
return rtStatus;
}
#if 0
/*
* Procedure : Download code into IMEM or DMEM
* Description: This routine will intialize firmware. If any error occurs during the initialization
* process, the routine shall terminate immediately and return fail.
* The routine copy virtual address get from opening of file into shared memory
* allocated during initialization. If code size larger than a conitneous shared
* memory may contain, the code should be divided into several section.
* !!!NOTES This finction should only be called during MPInitialization because
* A NIC driver should call NdisOpenFile only from MiniportInitialize.
* Arguments : The pointer of the adapter
* Code address (Virtual address, should fill descriptor with physical address)
* Code size
* Returns :
* RT_STATUS_FAILURE - the following initialization process should be terminated
* RT_STATUS_SUCCESS - if firmware initialization process success
*/
bool fwsend_download_code(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
rt_firmware *pfirmware = (rt_firmware*)(&priv->firmware);
bool rt_status = true;
u16 length = 0;
u16 offset = 0;
u16 frag_threhold;
bool last_init_packet = false;
u32 check_txcmdwait_queueemptytime = 100000;
u16 cmd_buf_len;
u8 *ptr_cmd_buf;
/* reset to 0 for first segment of img download */
pfirmware->firmware_seg_index = 1;
if(pfirmware->firmware_seg_index == pfirmware->firmware_seg_maxnum) {
last_init_packet = 1;
}
cmd_buf_len = pfirmware->firmware_seg_container[pfirmware->firmware_seg_index-1].seg_size;
ptr_cmd_buf = pfirmware->firmware_seg_container[pfirmware->firmware_seg_index-1].seg_ptr;
rtl819xU_tx_cmd(dev, ptr_cmd_buf, cmd_buf_len, last_init_packet, DESC_PACKET_TYPE_INIT);
rt_status = true;
return rt_status;
}
#endif
//-----------------------------------------------------------------------------
// Procedure: Check whether main code is download OK. If OK, turn on CPU
//
// Description: CPU register locates in different page against general register.
// Switch to CPU register in the begin and switch back before return
//
//
// Arguments: The pointer of the adapter
//
// Returns:
// NDIS_STATUS_FAILURE - the following initialization process should be terminated
// NDIS_STATUS_SUCCESS - if firmware initialization process success
//-----------------------------------------------------------------------------
bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
bool rt_status = true;
int check_putcodeOK_time = 200000, check_bootOk_time = 200000;
u32 CPU_status = 0;
/* Check whether put code OK */
do {
CPU_status = read_nic_dword(dev, CPU_GEN);
if((CPU_status&CPU_GEN_PUT_CODE_OK) || (priv->usb_error==true))
break;
}while(check_putcodeOK_time--);
if(!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
} else {
RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n");
}
/* Turn On CPU */
CPU_status = read_nic_dword(dev, CPU_GEN);
write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff));
mdelay(1000);
/* Check whether CPU boot OK */
do {
CPU_status = read_nic_dword(dev, CPU_GEN);
if((CPU_status&CPU_GEN_BOOT_RDY)||(priv->usb_error == true))
break;
}while(check_bootOk_time--);
if(!(CPU_status&CPU_GEN_BOOT_RDY)) {
goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
} else {
RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n");
}
return rt_status;
CPUCheckMainCodeOKAndTurnOnCPU_Fail:
RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
rt_status = FALSE;
return rt_status;
}
bool CPUcheck_firmware_ready(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
bool rt_status = true;
int check_time = 200000;
u32 CPU_status = 0;
/* Check Firmware Ready */
do {
CPU_status = read_nic_dword(dev, CPU_GEN);
if((CPU_status&CPU_GEN_FIRM_RDY)||(priv->usb_error == true))
break;
}while(check_time--);
if(!(CPU_status&CPU_GEN_FIRM_RDY))
goto CPUCheckFirmwareReady_Fail;
else
RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n");
return rt_status;
CPUCheckFirmwareReady_Fail:
RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
rt_status = false;
return rt_status;
}
bool init_firmware(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
bool rt_status = TRUE;
u8 *firmware_img_buf[3] = { &rtl8190_fwboot_array[0],
&rtl8190_fwmain_array[0],
&rtl8190_fwdata_array[0]};
u32 firmware_img_len[3] = { sizeof(rtl8190_fwboot_array),
sizeof(rtl8190_fwmain_array),
sizeof(rtl8190_fwdata_array)};
u32 file_length = 0;
u8 *mapped_file = NULL;
u32 init_step = 0;
opt_rst_type_e rst_opt = OPT_SYSTEM_RESET;
firmware_init_step_e starting_state = FW_INIT_STEP0_BOOT;
rt_firmware *pfirmware = priv->pFirmware;
const struct firmware *fw_entry;
const char *fw_name[3] = { "RTL8192U/boot.img",
"RTL8192U/main.img",
"RTL8192U/data.img"};
int rc;
RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
if (pfirmware->firmware_status == FW_STATUS_0_INIT ) {
/* it is called by reset */
rst_opt = OPT_SYSTEM_RESET;
starting_state = FW_INIT_STEP0_BOOT;
// TODO: system reset
}else if(pfirmware->firmware_status == FW_STATUS_5_READY) {
/* it is called by Initialize */
rst_opt = OPT_FIRMWARE_RESET;
starting_state = FW_INIT_STEP2_DATA;
}else {
RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
}
/*
* Download boot, main, and data image for System reset.
* Download data image for firmware reseta
*/
priv->firmware_source = FW_SOURCE_IMG_FILE;
for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
/*
* Open Image file, and map file to contineous memory if open file success.
* or read image file from array. Default load from IMG file
*/
if(rst_opt == OPT_SYSTEM_RESET) {
switch(priv->firmware_source) {
case FW_SOURCE_IMG_FILE:
if(pfirmware->firmware_buf_size[init_step] == 0) {
rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
if(rc < 0 ) {
RT_TRACE(COMP_ERR, "request firmware fail!\n");
goto download_firmware_fail;
}
if(fw_entry->size > sizeof(pfirmware->firmware_buf[init_step])) {
//RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
RT_TRACE(COMP_FIRMWARE, "img file size exceed the container buffer fail!, entry_size = %d, buf_size = %d\n",fw_entry->size,sizeof(pfirmware->firmware_buf[init_step]));
goto download_firmware_fail;
}
if(init_step != FW_INIT_STEP1_MAIN) {
memcpy(pfirmware->firmware_buf[init_step],fw_entry->data,fw_entry->size);
pfirmware->firmware_buf_size[init_step] = fw_entry->size;
} else {
#ifdef RTL8190P
memcpy(pfirmware->firmware_buf[init_step],fw_entry->data,fw_entry->size);
pfirmware->firmware_buf_size[init_step] = fw_entry->size;
#else
memset(pfirmware->firmware_buf[init_step],0,128);
memcpy(&pfirmware->firmware_buf[init_step][128],fw_entry->data,fw_entry->size);
mapped_file = pfirmware->firmware_buf[init_step];
pfirmware->firmware_buf_size[init_step] = fw_entry->size+128;
#endif
}
//pfirmware->firmware_buf_size = file_length;
if(rst_opt == OPT_SYSTEM_RESET) {
release_firmware(fw_entry);
}
}
mapped_file = pfirmware->firmware_buf[init_step];
file_length = pfirmware->firmware_buf_size[init_step];
break;
case FW_SOURCE_HEADER_FILE:
mapped_file = firmware_img_buf[init_step];
file_length = firmware_img_len[init_step];
if(init_step == FW_INIT_STEP2_DATA) {
memcpy(pfirmware->firmware_buf[init_step], mapped_file, file_length);
pfirmware->firmware_buf_size[init_step] = file_length;
}
break;
default:
break;
}
}else if(rst_opt == OPT_FIRMWARE_RESET ) {
/* we only need to download data.img here */
mapped_file = pfirmware->firmware_buf[init_step];
file_length = pfirmware->firmware_buf_size[init_step];
}
/* Download image file */
/* The firmware download process is just as following,
* 1. that is each packet will be segmented and inserted to the wait queue.
* 2. each packet segment will be put in the skb_buff packet.
* 3. each skb_buff packet data content will already include the firmware info
* and Tx descriptor info
* */
rt_status = fw_download_code(dev,mapped_file,file_length);
if(rt_status != TRUE) {
goto download_firmware_fail;
}
switch(init_step) {
case FW_INIT_STEP0_BOOT:
/* Download boot
* initialize command descriptor.
* will set polling bit when firmware code is also configured
*/
pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
#ifdef RTL8190P
// To initialize IMEM, CPU move code from 0x80000080, hence, we send 0x80 byte packet
rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
if(rt_status != true)
{
RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
goto download_firmware_fail;
}
#endif
//mdelay(1000);
/*
* To initialize IMEM, CPU move code from 0x80000080,
* hence, we send 0x80 byte packet
*/
break;
case FW_INIT_STEP1_MAIN:
/* Download firmware code. Wait until Boot Ready and Turn on CPU */
pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
/* Check Put Code OK and Turn On CPU */
rt_status = CPUcheck_maincodeok_turnonCPU(dev);
if(rt_status != TRUE) {
RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
goto download_firmware_fail;
}
pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
break;
case FW_INIT_STEP2_DATA:
/* download initial data code */
pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
mdelay(1);
rt_status = CPUcheck_firmware_ready(dev);
if(rt_status != TRUE) {
RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
goto download_firmware_fail;
}
/* wait until data code is initialized ready.*/
pfirmware->firmware_status = FW_STATUS_5_READY;
break;
}
}
RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n");
//assert(pfirmware->firmware_status == FW_STATUS_5_READY, ("Firmware Download Fail\n"));
return rt_status;
download_firmware_fail:
RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
rt_status = FALSE;
return rt_status;
}
#if 0
/*
* Procedure: (1) Transform firmware code from little endian to big endian if required.
* (2) Number of bytes in Firmware downloading should be multiple
* of 4 bytes. If length is not multiple of 4 bytes, appending of zeros is required
*
*/
void CmdAppendZeroAndEndianTransform(
u1Byte *pDst,
u1Byte *pSrc,
u2Byte *pLength)
{
u2Byte ulAppendBytes = 0, i;
u2Byte ulLength = *pLength;
//test only
//memset(pDst, 0xcc, 12);
/* Transform from little endian to big endian */
//#if DEV_BUS_TYPE==PCI_INTERFACE
#if 0
for( i=0 ; i<(*pLength) ; i+=4)
{
if((i+3) < (*pLength)) pDst[i+0] = pSrc[i+3];
if((i+2) < (*pLength)) pDst[i+1] = pSrc[i+2];
if((i+1) < (*pLength)) pDst[i+2] = pSrc[i+1];
if((i+0) < (*pLength)) pDst[i+3] = pSrc[i+0];
}
#else
pDst += USB_HWDESC_HEADER_LEN;
ulLength -= USB_HWDESC_HEADER_LEN;
for( i=0 ; i<ulLength ; i+=4) {
if((i+3) < ulLength) pDst[i+0] = pSrc[i+3];
if((i+2) < ulLength) pDst[i+1] = pSrc[i+2];
if((i+1) < ulLength) pDst[i+2] = pSrc[i+1];
if((i+0) < ulLength) pDst[i+3] = pSrc[i+0];
}
#endif
//1(2) Append Zero
if( ((*pLength) % 4) >0)
{
ulAppendBytes = 4-((*pLength) % 4);
for(i=0 ; i<ulAppendBytes; i++)
pDst[ 4*((*pLength)/4) + i ] = 0x0;
*pLength += ulAppendBytes;
}
}
#endif
#if 0
RT_STATUS
CmdSendPacket(
PADAPTER Adapter,
PRT_TCB pTcb,
PRT_TX_LOCAL_BUFFER pBuf,
u4Byte BufferLen,
u4Byte PacketType,
BOOLEAN bLastInitPacket
)
{
s2Byte i;
u1Byte QueueID;
u2Byte firstDesc,curDesc = 0;
u2Byte FragIndex=0, FragBufferIndex=0;
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
CmdInitTCB(Adapter, pTcb, pBuf, BufferLen);
if(CmdCheckFragment(Adapter, pTcb, pBuf))
CmdFragmentTCB(Adapter, pTcb);
else
pTcb->FragLength[0] = (u2Byte)pTcb->BufferList[0].Length;
QueueID=pTcb->SpecifiedQueueID;
#if DEV_BUS_TYPE!=USB_INTERFACE
firstDesc=curDesc=Adapter->NextTxDescToFill[QueueID];
#endif
#if DEV_BUS_TYPE!=USB_INTERFACE
if(VacancyTxDescNum(Adapter, QueueID) > pTcb->BufferCount)
#else
if(PlatformIsTxQueueAvailable(Adapter, QueueID, pTcb->BufferCount) &&
RTIsListEmpty(&Adapter->TcbWaitQueue[QueueID]))
#endif
{
pTcb->nDescUsed=0;
for(i=0 ; i<pTcb->BufferCount ; i++)
{
Adapter->HalFunc.TxFillCmdDescHandler(
Adapter,
pTcb,
QueueID, //QueueIndex
curDesc, //index
FragBufferIndex==0, //bFirstSeg
FragBufferIndex==(pTcb->FragBufCount[FragIndex]-1), //bLastSeg
pTcb->BufferList[i].VirtualAddress, //VirtualAddress
pTcb->BufferList[i].PhysicalAddressLow, //PhyAddressLow
pTcb->BufferList[i].Length, //BufferLen
i!=0, //bSetOwnBit
(i==(pTcb->BufferCount-1)) && bLastInitPacket, //bLastInitPacket
PacketType, //DescPacketType
pTcb->FragLength[FragIndex] //PktLen
);
if(FragBufferIndex==(pTcb->FragBufCount[FragIndex]-1))
{ // Last segment of the fragment.
pTcb->nFragSent++;
}
FragBufferIndex++;
if(FragBufferIndex==pTcb->FragBufCount[FragIndex])
{
FragIndex++;
FragBufferIndex=0;
}
#if DEV_BUS_TYPE!=USB_INTERFACE
curDesc=(curDesc+1)%Adapter->NumTxDesc[QueueID];
#endif
pTcb->nDescUsed++;
}
#if DEV_BUS_TYPE!=USB_INTERFACE
RTInsertTailList(&Adapter->TcbBusyQueue[QueueID], &pTcb->List);
IncrementTxDescToFill(Adapter, QueueID, pTcb->nDescUsed);
Adapter->HalFunc.SetTxDescOWNHandler(Adapter, QueueID, firstDesc);
// TODO: should call poll use QueueID
Adapter->HalFunc.TxPollingHandler(Adapter, TXCMD_QUEUE);
#endif
}
else
#if DEV_BUS_TYPE!=USB_INTERFACE
goto CmdSendPacket_Fail;
#else
{
pTcb->bLastInitPacket = bLastInitPacket;
RTInsertTailList(&Adapter->TcbWaitQueue[pTcb->SpecifiedQueueID], &pTcb->List);
}
#endif
return rtStatus;
#if DEV_BUS_TYPE!=USB_INTERFACE
CmdSendPacket_Fail:
rtStatus = RT_STATUS_FAILURE;
return rtStatus;
#endif
}
#endif
#if 0
RT_STATUS
FWSendNullPacket(
IN PADAPTER Adapter,
IN u4Byte Length
)
{
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
PRT_TCB pTcb;
PRT_TX_LOCAL_BUFFER pBuf;
BOOLEAN bLastInitPacket = FALSE;
PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
#if DEV_BUS_TYPE==USB_INTERFACE
Length += USB_HWDESC_HEADER_LEN;
#endif
//Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
if(MgntGetBuffer(Adapter, &pTcb, &pBuf))
{
PlatformZeroMemory(pBuf->Buffer.VirtualAddress, Length);
rtStatus = CmdSendPacket(Adapter, pTcb, pBuf, Length, DESC_PACKET_TYPE_INIT, bLastInitPacket); //0 : always set LastInitPacket to zero
//#if HAL_CODE_BASE != RTL8190HW
// // TODO: for test only
// ReturnTCB(Adapter, pTcb, RT_STATUS_SUCCESS);
//#endif
if(rtStatus == RT_STATUS_FAILURE)
goto CmdSendNullPacket_Fail;
}else
goto CmdSendNullPacket_Fail;
PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
return rtStatus;
CmdSendNullPacket_Fail:
PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
rtStatus = RT_STATUS_FAILURE;
RT_ASSERT(rtStatus == RT_STATUS_SUCCESS, ("CmdSendDownloadCode fail !!\n"));
return rtStatus;
}
#endif
drivers/staging/rtl8192su/r819xU_firmware.h deleted 100644 → 0
View file @ 0f29f587
#ifndef __INC_FIRMWARE_H
#define __INC_FIRMWARE_H
#define RTL8190_CPU_START_OFFSET 0x80
/* TODO: this definition is TBD */
//#define USB_HWDESC_HEADER_LEN 0
/* It should be double word alignment */
//#if DEV_BUS_TYPE==PCI_INTERFACE
//#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v) 4*(v/4) - 8
//#else
#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v) (4*(v/4) - 8 - USB_HWDESC_HEADER_LEN)
//#endif
typedef enum _firmware_init_step{
FW_INIT_STEP0_BOOT = 0,
FW_INIT_STEP1_MAIN = 1,
FW_INIT_STEP2_DATA = 2,
}firmware_init_step_e;
typedef enum _opt_rst_type{
OPT_SYSTEM_RESET = 0,
OPT_FIRMWARE_RESET = 1,
}opt_rst_type_e;
/* due to rtl8192 firmware */
typedef enum _desc_packet_type_e{
DESC_PACKET_TYPE_INIT = 0,
DESC_PACKET_TYPE_NORMAL = 1,
}desc_packet_type_e;
typedef enum _firmware_source{
FW_SOURCE_IMG_FILE = 0,
FW_SOURCE_HEADER_FILE = 1, //from header file
}firmware_source_e, *pfirmware_source_e;
typedef enum _firmware_status{
FW_STATUS_0_INIT = 0,
FW_STATUS_1_MOVE_BOOT_CODE = 1,
FW_STATUS_2_MOVE_MAIN_CODE = 2,
FW_STATUS_3_TURNON_CPU = 3,
FW_STATUS_4_MOVE_DATA_CODE = 4,
FW_STATUS_5_READY = 5,
}firmware_status_e;
typedef struct _rt_firmare_seg_container {
u16 seg_size;
u8 *seg_ptr;
}fw_seg_container, *pfw_seg_container;
#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000 //64k
#define MAX_FW_INIT_STEP 3
typedef struct _rt_firmware{
firmware_status_e firmware_status;
u16 cmdpacket_frag_thresold;
u8 firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
u16 firmware_buf_size[MAX_FW_INIT_STEP];
}rt_firmware, *prt_firmware;
typedef struct _rt_firmware_info_819xUsb{
u8 sz_info[16];
}rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
#if 0
/* CPU related */
RT_STATUS
CPUCheckMainCodeOKAndTurnOnCPU(
IN PADAPTER Adapter
);
RT_STATUS
CPUCheckFirmwareReady(
IN PADAPTER Adapter
);
/* Firmware related */
VOID
FWInitializeParameters(
IN PADAPTER Adapter
);
RT_STATUS
FWSendDownloadCode(
IN PADAPTER Adapter,
IN pu1Byte CodeVirtualAddrress,
IN u4Byte BufferLen
);
RT_STATUS
FWSendNullPacket(
IN PADAPTER Adapter,
IN u4Byte Length
);
RT_STATUS
CmdSendPacket(
PADAPTER Adapter,
PRT_TCB pTcb,
PRT_TX_LOCAL_BUFFER pBuf,
u4Byte BufferLen,
u4Byte PacketType,
BOOLEAN bLastInitPacket
);
#endif
#endif
drivers/staging/rtl8192su/r819xU_phy.c deleted 100644 → 0
View file @ 0f29f587
#include "r8192U.h"
#include "r8192U_hw.h"
#include "r819xU_phy.h"
#include "r819xU_phyreg.h"
#include "r8190_rtl8256.h"
#include "r8192U_dm.h"
#include "r819xU_firmware_img.h"
#include "ieee80211/dot11d.h"
static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
0,
0x085c, //2412 1
0x08dc, //2417 2
0x095c, //2422 3
0x09dc, //2427 4
0x0a5c, //2432 5
0x0adc, //2437 6
0x0b5c, //2442 7
0x0bdc, //2447 8
0x0c5c, //2452 9
0x0cdc, //2457 10
0x0d5c, //2462 11
0x0ddc, //2467 12
0x0e5c, //2472 13
0x0f72, //2484
};
#define rtl819XPHY_REG_1T2RArray Rtl8192UsbPHY_REG_1T2RArray
#define rtl819XMACPHY_Array_PG Rtl8192UsbMACPHY_Array_PG
#define rtl819XMACPHY_Array Rtl8192UsbMACPHY_Array
#define rtl819XRadioA_Array Rtl8192UsbRadioA_Array
#define rtl819XRadioB_Array Rtl8192UsbRadioB_Array
#define rtl819XRadioC_Array Rtl8192UsbRadioC_Array
#define rtl819XRadioD_Array Rtl8192UsbRadioD_Array
#define rtl819XAGCTAB_Array Rtl8192UsbAGCTAB_Array
/******************************************************************************
*function: This function read BB parameters from Header file we gen,
* and do register read/write
* input: u32 dwBitMask //taget bit pos in the addr to be modified
* output: none
* return: u32 return the shift bit bit position of the mask
* ****************************************************************************/
u32 rtl8192_CalculateBitShift(u32 dwBitMask)
{
u32 i;
for (i=0; i<=31; i++)
{
if (((dwBitMask>>i)&0x1) == 1)
break;
}
return i;
}
/******************************************************************************
*function: This function check different RF type to execute legal judgement. If RF Path is illegal, we will return false.
* input: none
* output: none
* return: 0(illegal, false), 1(legal,true)
* ***************************************************************************/
u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
{
u8 ret = 1;
struct r8192_priv *priv = ieee80211_priv(dev);
if (priv->rf_type == RF_2T4R)
ret = 0;
else if (priv->rf_type == RF_1T2R)
{
if (eRFPath == RF90_PATH_A || eRFPath == RF90_PATH_B)
ret = 1;
else if (eRFPath == RF90_PATH_C || eRFPath == RF90_PATH_D)
ret = 0;
}
return ret;
}
/******************************************************************************
*function: This function set specific bits to BB register
* input: net_device dev
* u32 dwRegAddr //target addr to be modified
* u32 dwBitMask //taget bit pos in the addr to be modified
* u32 dwData //value to be write
* output: none
* return: none
* notice:
* ****************************************************************************/
void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData)
{
u32 OriginalValue, BitShift, NewValue;
if(dwBitMask!= bMaskDWord)
{//if not "double word" write
OriginalValue = read_nic_dword(dev, dwRegAddr);
BitShift = rtl8192_CalculateBitShift(dwBitMask);
NewValue = (((OriginalValue) & (~dwBitMask)) | (dwData << BitShift));
write_nic_dword(dev, dwRegAddr, NewValue);
}else
write_nic_dword(dev, dwRegAddr, dwData);
return;
}
/******************************************************************************
*function: This function reads specific bits from BB register
* input: net_device dev
* u32 dwRegAddr //target addr to be readback
* u32 dwBitMask //taget bit pos in the addr to be readback
* output: none
* return: u32 Data //the readback register value
* notice:
* ****************************************************************************/
u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask)
{
u32 Ret = 0, OriginalValue, BitShift;
OriginalValue = read_nic_dword(dev, dwRegAddr);
BitShift = rtl8192_CalculateBitShift(dwBitMask);
Ret =(OriginalValue & dwBitMask) >> BitShift;
return (Ret);
}
static u32 phy_FwRFSerialRead( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset );
static void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
/******************************************************************************
*function: This function read register from RF chip
* input: net_device dev
* RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
* u32 Offset //target address to be read
* output: none
* return: u32 readback value
* notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information.
* ****************************************************************************/
u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 ret = 0;
u32 NewOffset = 0;
BB_REGISTER_DEFINITION_T* pPhyReg = &priv->PHYRegDef[eRFPath];
rtl8192_setBBreg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData, 0);
//make sure RF register offset is correct
Offset &= 0x3f;
//switch page for 8256 RF IC
if (priv->rf_chip == RF_8256)
{
if (Offset >= 31)
{
priv->RfReg0Value[eRFPath] |= 0x140;
//Switch to Reg_Mode2 for Reg 31-45
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
//modify offset
NewOffset = Offset -30;
}
else if (Offset >= 16)
{
priv->RfReg0Value[eRFPath] |= 0x100;
priv->RfReg0Value[eRFPath] &= (~0x40);
//Switch to Reg_Mode 1 for Reg16-30
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
NewOffset = Offset - 15;
}
else
NewOffset = Offset;
}
else
{
RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n");
NewOffset = Offset;
}
//put desired read addr to LSSI control Register
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset);
//Issue a posedge trigger
//
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0);
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1);
// TODO: we should not delay such a long time. Ask help from SD3
msleep(1);
ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
// Switch back to Reg_Mode0;
if(priv->rf_chip == RF_8256)
{
priv->RfReg0Value[eRFPath] &= 0xebf;
rtl8192_setBBreg(
dev,
pPhyReg->rf3wireOffset,
bMaskDWord,
(priv->RfReg0Value[eRFPath] << 16));
}
return ret;
}
/******************************************************************************
*function: This function write data to RF register
* input: net_device dev
* RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
* u32 Offset //target address to be written
* u32 Data //The new register data to be written
* output: none
* return: none
* notice: For RF8256 only.
===========================================================
*Reg Mode RegCTL[1] RegCTL[0] Note
* (Reg00[12]) (Reg00[10])
*===========================================================
*Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf)
*------------------------------------------------------------------
*Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf)
*------------------------------------------------------------------
* Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf)
*------------------------------------------------------------------
* ****************************************************************************/
void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 DataAndAddr = 0, NewOffset = 0;
BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
Offset &= 0x3f;
//spin_lock_irqsave(&priv->rf_lock, flags);
// down(&priv->rf_sem);
if (priv->rf_chip == RF_8256)
{
if (Offset >= 31)
{
priv->RfReg0Value[eRFPath] |= 0x140;
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16));
NewOffset = Offset - 30;
}
else if (Offset >= 16)
{
priv->RfReg0Value[eRFPath] |= 0x100;
priv->RfReg0Value[eRFPath] &= (~0x40);
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16));
NewOffset = Offset - 15;
}
else
NewOffset = Offset;
}
else
{
RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n");
NewOffset = Offset;
}
// Put write addr in [5:0] and write data in [31:16]
DataAndAddr = (Data<<16) | (NewOffset&0x3f);
// Write Operation
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
if(Offset==0x0)
priv->RfReg0Value[eRFPath] = Data;
// Switch back to Reg_Mode0;
if(priv->rf_chip == RF_8256)
{
if(Offset != 0)
{
priv->RfReg0Value[eRFPath] &= 0xebf;
rtl8192_setBBreg(
dev,
pPhyReg->rf3wireOffset,
bMaskDWord,
(priv->RfReg0Value[eRFPath] << 16));
}
}
//spin_unlock_irqrestore(&priv->rf_lock, flags);
// up(&priv->rf_sem);
return;
}
/******************************************************************************
*function: This function set specific bits to RF register
* input: net_device dev
* RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
* u32 RegAddr //target addr to be modified
* u32 BitMask //taget bit pos in the addr to be modified
* u32 Data //value to be write
* output: none
* return: none
* notice:
* ****************************************************************************/
void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 Original_Value, BitShift, New_Value;
// u8 time = 0;
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
return;
if (priv->Rf_Mode == RF_OP_By_FW)
{
if (BitMask != bMask12Bits) // RF data is 12 bits only
{
Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
BitShift = rtl8192_CalculateBitShift(BitMask);
New_Value = ((Original_Value) & (~BitMask)) | (Data<< BitShift);
phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value);
}else
phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data);
udelay(200);
}
else
{
if (BitMask != bMask12Bits) // RF data is 12 bits only
{
Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr);
BitShift = rtl8192_CalculateBitShift(BitMask);
New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value);
}else
rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, Data);
}
return;
}
/******************************************************************************
*function: This function reads specific bits from RF register
* input: net_device dev
* u32 RegAddr //target addr to be readback
* u32 BitMask //taget bit pos in the addr to be readback
* output: none
* return: u32 Data //the readback register value
* notice:
* ****************************************************************************/
u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
{
u32 Original_Value, Readback_Value, BitShift;
struct r8192_priv *priv = ieee80211_priv(dev);
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
return 0;
if (priv->Rf_Mode == RF_OP_By_FW)
{
Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
BitShift = rtl8192_CalculateBitShift(BitMask);
Readback_Value = (Original_Value & BitMask) >> BitShift;
udelay(200);
return (Readback_Value);
}
else
{
Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr);
BitShift = rtl8192_CalculateBitShift(BitMask);
Readback_Value = (Original_Value & BitMask) >> BitShift;
return (Readback_Value);
}
}
/******************************************************************************
*function: We support firmware to execute RF-R/W.
* input: dev
* output: none
* return: none
* notice:
* ***************************************************************************/
static u32
phy_FwRFSerialRead(
struct net_device* dev,
RF90_RADIO_PATH_E eRFPath,
u32 Offset )
{
u32 retValue = 0;
u32 Data = 0;
u8 time = 0;
//DbgPrint("FW RF CTRL\n\r");
/* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can
not execute the scheme in the initial step. Otherwise, RF-R/W will waste
much time. This is only for site survey. */
// 1. Read operation need not insert data. bit 0-11
//Data &= bMask12Bits;
// 2. Write RF register address. Bit 12-19
Data |= ((Offset&0xFF)<<12);
// 3. Write RF path. bit 20-21
Data |= ((eRFPath&0x3)<<20);
// 4. Set RF read indicator. bit 22=0
//Data |= 0x00000;
// 5. Trigger Fw to operate the command. bit 31
Data |= 0x80000000;
// 6. We can not execute read operation if bit 31 is 1.
while (read_nic_dword(dev, QPNR)&0x80000000)
{
// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
if (time++ < 100)
{
//DbgPrint("FW not finish RF-R Time=%d\n\r", time);
udelay(10);
}
else
break;
}
// 7. Execute read operation.
write_nic_dword(dev, QPNR, Data);
// 8. Check if firmawre send back RF content.
while (read_nic_dword(dev, QPNR)&0x80000000)
{
// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
if (time++ < 100)
{
//DbgPrint("FW not finish RF-W Time=%d\n\r", time);
udelay(10);
}
else
return (0);
}
retValue = read_nic_dword(dev, RF_DATA);
return (retValue);
} /* phy_FwRFSerialRead */
/******************************************************************************
*function: We support firmware to execute RF-R/W.
* input: dev
* output: none
* return: none
* notice:
* ***************************************************************************/
static void
phy_FwRFSerialWrite(
struct net_device* dev,
RF90_RADIO_PATH_E eRFPath,
u32 Offset,
u32 Data )
{
u8 time = 0;
//DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data);
/* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can
not execute the scheme in the initial step. Otherwise, RF-R/W will waste
much time. This is only for site survey. */
// 1. Set driver write bit and 12 bit data. bit 0-11
//Data &= bMask12Bits; // Done by uper layer.
// 2. Write RF register address. bit 12-19
Data |= ((Offset&0xFF)<<12);
// 3. Write RF path. bit 20-21
Data |= ((eRFPath&0x3)<<20);
// 4. Set RF write indicator. bit 22=1
Data |= 0x400000;
// 5. Trigger Fw to operate the command. bit 31=1
Data |= 0x80000000;
// 6. Write operation. We can not write if bit 31 is 1.
while (read_nic_dword(dev, QPNR)&0x80000000)
{
// If FW can not finish RF-R/W for more than ?? times. We must reset FW.
if (time++ < 100)
{
//DbgPrint("FW not finish RF-W Time=%d\n\r", time);
udelay(10);
}
else
break;
}
// 7. No matter check bit. We always force the write. Because FW will
// not accept the command.
write_nic_dword(dev, QPNR, Data);
/* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware
to finish RF write operation. */
/* 2008/01/17 MH We support delay in firmware side now. */
//delay_us(20);
} /* phy_FwRFSerialWrite */
/******************************************************************************
*function: This function read BB parameters from Header file we gen,
* and do register read/write
* input: dev
* output: none
* return: none
* notice: BB parameters may change all the time, so please make
* sure it has been synced with the newest.
* ***************************************************************************/
void rtl8192_phy_configmac(struct net_device* dev)
{
u32 dwArrayLen = 0, i;
u32* pdwArray = NULL;
struct r8192_priv *priv = ieee80211_priv(dev);
if(priv->btxpowerdata_readfromEEPORM)
{
RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array_PG\n");
dwArrayLen = MACPHY_Array_PGLength;
pdwArray = rtl819XMACPHY_Array_PG;
}
else
{
RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array\n");
dwArrayLen = MACPHY_ArrayLength;
pdwArray = rtl819XMACPHY_Array;
}
for(i = 0; i<dwArrayLen; i=i+3){
if(pdwArray[i] == 0x318)
{
pdwArray[i+2] = 0x00000800;
//DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n",
// ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
}
RT_TRACE(COMP_DBG, "The Rtl8190MACPHY_Array[0] is %x Rtl8190MACPHY_Array[1] is %x Rtl8190MACPHY_Array[2] is %x\n",
pdwArray[i], pdwArray[i+1], pdwArray[i+2]);
rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], pdwArray[i+2]);
}
return;
}
/******************************************************************************
*function: This function do dirty work
* input: dev
* output: none
* return: none
* notice: BB parameters may change all the time, so please make
* sure it has been synced with the newest.
* ***************************************************************************/
void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
{
u32 i;
#ifdef TO_DO_LIST
u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL;
if(Adapter->bInHctTest)
{
PHY_REGArrayLen = PHY_REGArrayLengthDTM;
AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM;
Rtl8190PHY_REGArray_Table = Rtl819XPHY_REGArrayDTM;
Rtl8190AGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM;
}
#endif
if (ConfigType == BaseBand_Config_PHY_REG)
{
for (i=0; i<PHY_REG_1T2RArrayLength; i+=2)
{
rtl8192_setBBreg(dev, rtl819XPHY_REG_1T2RArray[i], bMaskDWord, rtl819XPHY_REG_1T2RArray[i+1]);
RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x \n",i, rtl819XPHY_REG_1T2RArray[i], rtl819XPHY_REG_1T2RArray[i+1]);
}
}
else if (ConfigType == BaseBand_Config_AGC_TAB)
{
for (i=0; i<AGCTAB_ArrayLength; i+=2)
{
rtl8192_setBBreg(dev, rtl819XAGCTAB_Array[i], bMaskDWord, rtl819XAGCTAB_Array[i+1]);
RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x \n",i, rtl819XAGCTAB_Array[i], rtl819XAGCTAB_Array[i+1]);
}
}
return;
}
/******************************************************************************
*function: This function initialize Register definition offset for Radio Path
* A/B/C/D
* input: net_device dev
* output: none
* return: none
* notice: Initialization value here is constant and it should never be changed
* ***************************************************************************/
void rtl8192_InitBBRFRegDef(struct net_device* dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
// RF Interface Sowrtware Control
priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876)
// RF Interface Readback Value
priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0
priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2)
priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4
priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6)
// RF Interface Output (and Enable)
priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860
priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864
priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x868
priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x86C
// RF Interface (Output and) Enable
priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862)
priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866)
priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
//Addr of LSSI. Wirte RF register by driver
priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter;
// RF parameter
priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; //BB Band Select
priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter;
priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter;
priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter;
// Tx AGC Gain Stage (same for all path. Should we remove this?)
priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
// Tranceiver A~D HSSI Parameter-1
priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; //wire control parameter1
priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; //wire control parameter1
priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1; //wire control parameter1
priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1; //wire control parameter1
// Tranceiver A~D HSSI Parameter-2
priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; //wire control parameter2
priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; //wire control parameter2
priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2; //wire control parameter2
priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2; //wire control parameter1
// RF switch Control
priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control
priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl;
priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl;
priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl;
// AGC control 1
priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1;
priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1;
priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1;
priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1;
// AGC control 2
priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2;
priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2;
priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2;
priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2;
// RX AFE control 1
priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance;
priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance;
priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance;
priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance;
// RX AFE control 1
priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE;
priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE;
priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE;
priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE;
// Tx AFE control 1
priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance;
priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance;
priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance;
priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance;
// Tx AFE control 2
priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE;
priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE;
priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE;
priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE;
// Tranceiver LSSI Readback
priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack;
priv->PHYRegDef[RF90_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack;
}
/******************************************************************************
*function: This function is to write register and then readback to make sure whether BB and RF is OK
* input: net_device dev
* HW90_BLOCK_E CheckBlock
* RF90_RADIO_PATH_E eRFPath //only used when checkblock is HW90_BLOCK_RF
* output: none
* return: return whether BB and RF is ok(0:OK; 1:Fail)
* notice: This function may be removed in the ASIC
* ***************************************************************************/
u8 rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath)
{
// struct r8192_priv *priv = ieee80211_priv(dev);
// BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
u8 ret = 0;
u32 i, CheckTimes = 4, dwRegRead = 0;
u32 WriteAddr[4];
u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f};
// Initialize register address offset to be checked
WriteAddr[HW90_BLOCK_MAC] = 0x100;
WriteAddr[HW90_BLOCK_PHY0] = 0x900;
WriteAddr[HW90_BLOCK_PHY1] = 0x800;
WriteAddr[HW90_BLOCK_RF] = 0x3;
RT_TRACE(COMP_PHY, "=======>%s(), CheckBlock:%d\n", __FUNCTION__, CheckBlock);
for(i=0 ; i < CheckTimes ; i++)
{
//
// Write Data to register and readback
//
switch(CheckBlock)
{
case HW90_BLOCK_MAC:
RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!");
break;
case HW90_BLOCK_PHY0:
case HW90_BLOCK_PHY1:
write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]);
dwRegRead = read_nic_dword(dev, WriteAddr[CheckBlock]);
break;
case HW90_BLOCK_RF:
WriteData[i] &= 0xfff;
rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]);
// TODO: we should not delay for such a long time. Ask SD3
msleep(1);
dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits);
msleep(1);
break;
default:
ret = 1;
break;
}
//
// Check whether readback data is correct
//
if(dwRegRead != WriteData[i])
{
RT_TRACE((COMP_PHY|COMP_ERR), "====>error=====dwRegRead: %x, WriteData: %x \n", dwRegRead, WriteData[i]);
ret = 1;
break;
}
}
return ret;
}
/******************************************************************************
*function: This function initialize BB&RF
* input: net_device dev
* output: none
* return: none
* notice: Initialization value may change all the time, so please make
* sure it has been synced with the newest.
* ***************************************************************************/
void rtl8192_BB_Config_ParaFile(struct net_device* dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 bRegValue = 0, eCheckItem = 0, rtStatus = 0;
u32 dwRegValue = 0;
/**************************************
//<1>Initialize BaseBand
**************************************/
/*--set BB Global Reset--*/
bRegValue = read_nic_byte(dev, BB_GLOBAL_RESET);
write_nic_byte(dev, BB_GLOBAL_RESET,(bRegValue|BB_GLOBAL_RESET_BIT));
mdelay(50);
/*---set BB reset Active---*/
dwRegValue = read_nic_dword(dev, CPU_GEN);
write_nic_dword(dev, CPU_GEN, (dwRegValue&(~CPU_GEN_BB_RST)));
/*----Ckeck FPGAPHY0 and PHY1 board is OK----*/
// TODO: this function should be removed on ASIC , Emily 2007.2.2
for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++)
{
rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path
if(rtStatus != 0)
{
RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1);
return ;
}
}
/*---- Set CCK and OFDM Block "OFF"----*/
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0);
/*----BB Register Initilazation----*/
//==m==>Set PHY REG From Header<==m==
rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG);
/*----Set BB reset de-Active----*/
dwRegValue = read_nic_dword(dev, CPU_GEN);
write_nic_dword(dev, CPU_GEN, (dwRegValue|CPU_GEN_BB_RST));
/*----BB AGC table Initialization----*/
//==m==>Set PHY REG From Header<==m==
rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB);
/*----Enable XSTAL ----*/
write_nic_byte_E(dev, 0x5e, 0x00);
if (priv->card_8192_version == (u8)VERSION_819xU_A)
{
//Antenna gain offset from B/C/D to A
dwRegValue = (priv->AntennaTxPwDiff[1]<<4 | priv->AntennaTxPwDiff[0]);
rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), dwRegValue);
//XSTALLCap
dwRegValue = priv->CrystalCap & 0xf;
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap, dwRegValue);
}
// Check if the CCK HighPower is turned ON.
// This is used to calculate PWDB.
priv->bCckHighPower = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200));
return;
}
/******************************************************************************
*function: This function initialize BB&RF
* input: net_device dev
* output: none
* return: none
* notice: Initialization value may change all the time, so please make
* sure it has been synced with the newest.
* ***************************************************************************/
void rtl8192_BBConfig(struct net_device* dev)
{
rtl8192_InitBBRFRegDef(dev);
//config BB&RF. As hardCode based initialization has not been well
//implemented, so use file first.FIXME:should implement it for hardcode?
rtl8192_BB_Config_ParaFile(dev);
return;
}
/******************************************************************************
*function: This function obtains the initialization value of Tx power Level offset
* input: net_device dev
* output: none
* return: none
* ***************************************************************************/
void rtl8192_phy_getTxPower(struct net_device* dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
priv->MCSTxPowerLevelOriginalOffset[0] =
read_nic_dword(dev, rTxAGC_Rate18_06);
priv->MCSTxPowerLevelOriginalOffset[1] =
read_nic_dword(dev, rTxAGC_Rate54_24);
priv->MCSTxPowerLevelOriginalOffset[2] =
read_nic_dword(dev, rTxAGC_Mcs03_Mcs00);
priv->MCSTxPowerLevelOriginalOffset[3] =
read_nic_dword(dev, rTxAGC_Mcs07_Mcs04);
priv->MCSTxPowerLevelOriginalOffset[4] =
read_nic_dword(dev, rTxAGC_Mcs11_Mcs08);
priv->MCSTxPowerLevelOriginalOffset[5] =
read_nic_dword(dev, rTxAGC_Mcs15_Mcs12);
// read rx initial gain
priv->DefaultInitialGain[0] = read_nic_byte(dev, rOFDM0_XAAGCCore1);
priv->DefaultInitialGain[1] = read_nic_byte(dev, rOFDM0_XBAGCCore1);
priv->DefaultInitialGain[2] = read_nic_byte(dev, rOFDM0_XCAGCCore1);
priv->DefaultInitialGain[3] = read_nic_byte(dev, rOFDM0_XDAGCCore1);
RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n",
priv->DefaultInitialGain[0], priv->DefaultInitialGain[1],
priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]);
// read framesync
priv->framesync = read_nic_byte(dev, rOFDM0_RxDetector3);
priv->framesyncC34 = read_nic_byte(dev, rOFDM0_RxDetector2);
RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n",
rOFDM0_RxDetector3, priv->framesync);
// read SIFS (save the value read fome MACPHY_REG.txt)
priv->SifsTime = read_nic_word(dev, SIFS);
return;
}
/******************************************************************************
*function: This function obtains the initialization value of Tx power Level offset
* input: net_device dev
* output: none
* return: none
* ***************************************************************************/
void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 powerlevel = priv->TxPowerLevelCCK[channel-1];
u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
switch(priv->rf_chip)
{
case RF_8256:
PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement
PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
break;
default:
// case RF_8225:
// case RF_8258:
RT_TRACE((COMP_PHY|COMP_ERR), "error RF chipID(8225 or 8258) in function %s()\n", __FUNCTION__);
break;
}
return;
}
/******************************************************************************
*function: This function check Rf chip to do RF config
* input: net_device dev
* output: none
* return: only 8256 is supported
* ***************************************************************************/
void rtl8192_phy_RFConfig(struct net_device* dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
switch(priv->rf_chip)
{
case RF_8256:
PHY_RF8256_Config(dev);
break;
// case RF_8225:
// case RF_8258:
default:
RT_TRACE(COMP_ERR, "error chip id\n");
break;
}
return;
}
/******************************************************************************
*function: This function update Initial gain
* input: net_device dev
* output: none
* return: As Windows has not implemented this, wait for complement
* ***************************************************************************/
void rtl8192_phy_updateInitGain(struct net_device* dev)
{
return;
}
/******************************************************************************
*function: This function read RF parameters from general head file, and do RF 3-wire
* input: net_device dev
* output: none
* return: return code show if RF configuration is successful(0:pass, 1:fail)
* Note: Delay may be required for RF configuration
* ***************************************************************************/
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E eRFPath)
{
int i;
//u32* pRFArray;
u8 ret = 0;
switch(eRFPath){
case RF90_PATH_A:
for(i = 0;i<RadioA_ArrayLength; i=i+2){
if(rtl819XRadioA_Array[i] == 0xfe){
mdelay(100);
continue;
}
rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioA_Array[i], bMask12Bits, rtl819XRadioA_Array[i+1]);
mdelay(1);
}
break;
case RF90_PATH_B:
for(i = 0;i<RadioB_ArrayLength; i=i+2){
if(rtl819XRadioB_Array[i] == 0xfe){
mdelay(100);
continue;
}
rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioB_Array[i], bMask12Bits, rtl819XRadioB_Array[i+1]);
mdelay(1);
}
break;
case RF90_PATH_C:
for(i = 0;i<RadioC_ArrayLength; i=i+2){
if(rtl819XRadioC_Array[i] == 0xfe){
mdelay(100);
continue;
}
rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioC_Array[i], bMask12Bits, rtl819XRadioC_Array[i+1]);
mdelay(1);
}
break;
case RF90_PATH_D:
for(i = 0;i<RadioD_ArrayLength; i=i+2){
if(rtl819XRadioD_Array[i] == 0xfe){
mdelay(100);
continue;
}
rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioD_Array[i], bMask12Bits, rtl819XRadioD_Array[i+1]);
mdelay(1);
}
break;
default:
break;
}
return ret;;
}
/******************************************************************************
*function: This function set Tx Power of the channel
* input: struct net_device *dev
* u8 channel
* output: none
* return: none
* Note:
* ***************************************************************************/
void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 powerlevel = priv->TxPowerLevelCCK[channel-1];
u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
switch(priv->rf_chip)
{
case RF_8225:
#ifdef TO_DO_LIST
PHY_SetRF8225CckTxPower(Adapter, powerlevel);
PHY_SetRF8225OfdmTxPower(Adapter, powerlevelOFDM24G);
#endif
break;
case RF_8256:
PHY_SetRF8256CCKTxPower(dev, powerlevel);
PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
break;
case RF_8258:
break;
default:
RT_TRACE(COMP_ERR, "unknown rf chip ID in rtl8192_SetTxPowerLevel()\n");
break;
}
return;
}
/******************************************************************************
*function: This function set RF state on or off
* input: struct net_device *dev
* RT_RF_POWER_STATE eRFPowerState //Power State to set
* output: none
* return: none
* Note:
* ***************************************************************************/
bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
{
bool bResult = true;
// u8 eRFPath;
struct r8192_priv *priv = ieee80211_priv(dev);
if(eRFPowerState == priv->ieee80211->eRFPowerState)
return false;
if(priv->SetRFPowerStateInProgress == true)
return false;
priv->SetRFPowerStateInProgress = true;
switch(priv->rf_chip)
{
case RF_8256:
switch( eRFPowerState )
{
case eRfOn:
#if 0
rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3); // 0x88c[4]
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x3); // 0xc04[3:0]
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x3); // 0xd04[3:0]
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x7000, 0x3); // 0x884[14:12]
// for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
// PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2);
//SwChnl(Adapter->ChannelID);
#endif
//RF-A, RF-B
//enable RF-Chip A/B
rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
//analog to digital on
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
//digital to analog on
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3]
//rx antenna on
rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
//rx antenna on
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
//analog to digital part2 on
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
break;
case eRfSleep:
break;
case eRfOff:
#if 0
rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4]
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x0); // 0x88c[4]
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5]
rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0); // 0xc04[3:0]
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0); // 0xd04[3:0]
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x7000, 0x0); // 0x884[14:12]
// for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
// PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
#endif
//RF-A, RF-B
//disable RF-Chip A/B
rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4]
//analog to digital off, for power save
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
//digital to analog off, for power save
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0); // 0x880[4:3]
//rx antenna off
rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0]
//rx antenna off
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0]
//analog to digital part2 off, for power save
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5]
break;
default:
bResult = false;
RT_TRACE(COMP_ERR, "SetRFPowerState819xUsb(): unknow state to set: 0x%X!!!\n", eRFPowerState);
break;
}
break;
default:
RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip);
break;
}
#ifdef TO_DO_LIST
if(bResult)
{
// Update current RF state variable.
pHalData->eRFPowerState = eRFPowerState;
switch(pHalData->RFChipID )
{
case RF_8256:
switch(pHalData->eRFPowerState)
{
case eRfOff:
//
//If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015
//
if(pMgntInfo->RfOffReason==RF_CHANGE_BY_IPS )
{
Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK);
}
else
{
// Turn off LED if RF is not ON.
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
}
break;
case eRfOn:
// Turn on RF we are still linked, which might happen when
// we quickly turn off and on HW RF. 2006.05.12, by rcnjko.
if( pMgntInfo->bMediaConnect == TRUE )
{
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
}
else
{
// Turn off LED if RF is not ON.
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
}
break;
default:
// do nothing.
break;
}// Switch RF state
break;
default:
RT_TRACE(COMP_RF, DBG_LOUD, ("SetRFPowerState8190(): Unknown RF type\n"));
break;
}
}
#endif
priv->SetRFPowerStateInProgress = false;
return bResult;
}
/****************************************************************************************
*function: This function set command table variable(struct SwChnlCmd).
* input: SwChnlCmd* CmdTable //table to be set.
* u32 CmdTableIdx //variable index in table to be set
* u32 CmdTableSz //table size.
* SwChnlCmdID CmdID //command ID to set.
* u32 Para1
* u32 Para2
* u32 msDelay
* output:
* return: true if finished, false otherwise
* Note:
* ************************************************************************************/
u8 rtl8192_phy_SetSwChnlCmdArray(
SwChnlCmd* CmdTable,
u32 CmdTableIdx,
u32 CmdTableSz,
SwChnlCmdID CmdID,
u32 Para1,
u32 Para2,
u32 msDelay
)
{
SwChnlCmd* pCmd;
if(CmdTable == NULL)
{
RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n");
return false;
}
if(CmdTableIdx >= CmdTableSz)
{
RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n",
CmdTableIdx, CmdTableSz);
return false;
}
pCmd = CmdTable + CmdTableIdx;
pCmd->CmdID = CmdID;
pCmd->Para1 = Para1;
pCmd->Para2 = Para2;
pCmd->msDelay = msDelay;
return true;
}
/******************************************************************************
*function: This function set channel step by step
* input: struct net_device *dev
* u8 channel
* u8* stage //3 stages
* u8* step //
* u32* delay //whether need to delay
* output: store new stage, step and delay for next step(combine with function above)
* return: true if finished, false otherwise
* Note: Wait for simpler function to replace it //wb
* ***************************************************************************/
u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u8* step, u32* delay)
{
struct r8192_priv *priv = ieee80211_priv(dev);
// PCHANNEL_ACCESS_SETTING pChnlAccessSetting;
SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT];
u32 PreCommonCmdCnt;
SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT];
u32 PostCommonCmdCnt;
SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT];
u32 RfDependCmdCnt;
SwChnlCmd *CurrentCmd = NULL;
//RF90_RADIO_PATH_E eRFPath;
u8 eRFPath;
// u32 RfRetVal;
// u8 RetryCnt;
RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel);
// RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel));
if (!IsLegalChannel(priv->ieee80211, channel))
{
RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel);
return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop.
}
//FIXME:need to check whether channel is legal or not here.WB
//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
// for(eRFPath = 0; eRFPath <RF90_PATH_MAX; eRFPath++)
// {
// if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
// continue;
// <1> Fill up pre common command.
PreCommonCmdCnt = 0;
rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
CmdID_SetTxPowerLevel, 0, 0, 0);
rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
CmdID_End, 0, 0, 0);
// <2> Fill up post common command.
PostCommonCmdCnt = 0;
rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT,
CmdID_End, 0, 0, 0);
// <3> Fill up RF dependent command.
RfDependCmdCnt = 0;
switch( priv->rf_chip )
{
case RF_8225:
if (!(channel >= 1 && channel <= 14))
{
RT_TRACE(COMP_ERR, "illegal channel for Zebra 8225: %d\n", channel);
return true;
}
rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
CmdID_RF_WriteReg, rZebra1_Channel, RF_CHANNEL_TABLE_ZEBRA[channel], 10);
rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
CmdID_End, 0, 0, 0);
break;
case RF_8256:
// TEST!! This is not the table for 8256!!
if (!(channel >= 1 && channel <= 14))
{
RT_TRACE(COMP_ERR, "illegal channel for Zebra 8256: %d\n", channel);
return true;
}
rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
CmdID_RF_WriteReg, rZebra1_Channel, channel, 10);
rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
CmdID_End, 0, 0, 0);
break;
case RF_8258:
break;
default:
RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip);
return true;
break;
}
do{
switch(*stage)
{
case 0:
CurrentCmd=&PreCommonCmd[*step];
break;
case 1:
CurrentCmd=&RfDependCmd[*step];
break;
case 2:
CurrentCmd=&PostCommonCmd[*step];
break;
}
if(CurrentCmd->CmdID==CmdID_End)
{
if((*stage)==2)
{
(*delay)=CurrentCmd->msDelay;
return true;
}
else
{
(*stage)++;
(*step)=0;
continue;
}
}
switch(CurrentCmd->CmdID)
{
case CmdID_SetTxPowerLevel:
if(priv->card_8192_version == (u8)VERSION_819xU_A) //xiong: consider it later!
rtl8192_SetTxPowerLevel(dev,channel);
break;
case CmdID_WritePortUlong:
write_nic_dword(dev, CurrentCmd->Para1, CurrentCmd->Para2);
break;
case CmdID_WritePortUshort:
write_nic_word(dev, CurrentCmd->Para1, (u16)CurrentCmd->Para2);
break;
case CmdID_WritePortUchar:
write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2);
break;
case CmdID_RF_WriteReg:
for(eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++)
{
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bZebra1_ChannelNum, CurrentCmd->Para2);
}
break;
default:
break;
}
break;
}while(true);
// }/*for(Number of RF paths)*/
(*delay)=CurrentCmd->msDelay;
(*step)++;
return false;
}
/******************************************************************************
*function: This function does acturally set channel work
* input: struct net_device *dev
* u8 channel
* output: none
* return: noin
* Note: We should not call this function directly
* ***************************************************************************/
void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 delay = 0;
while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay))
{
// if(delay>0)
// msleep(delay);//or mdelay? need further consideration
if(!priv->up)
break;
}
}
/******************************************************************************
*function: Callback routine of the work item for switch channel.
* input:
*
* output: none
* return: noin
* ***************************************************************************/
void rtl8192_SwChnl_WorkItem(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
RT_TRACE(COMP_CH, "==> SwChnlCallback819xUsbWorkItem(), chan:%d\n", priv->chan);
rtl8192_phy_FinishSwChnlNow(dev , priv->chan);
RT_TRACE(COMP_CH, "<== SwChnlCallback819xUsbWorkItem()\n");
}
/******************************************************************************
*function: This function scheduled actural workitem to set channel
* input: net_device dev
* u8 channel //channel to set
* output: none
* return: return code show if workitem is scheduled(1:pass, 0:fail)
* Note: Delay may be required for RF configuration
* ***************************************************************************/
u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
RT_TRACE(COMP_CH, "=====>%s(), SwChnlInProgress:%d\n", __FUNCTION__, priv->SwChnlInProgress);
if(!priv->up)
return false;
if(priv->SwChnlInProgress)
return false;
// if(pHalData->SetBWModeInProgress)
// return;
if (0) //to test current channel from RF reg 0x7.
{
u8 eRFPath;
for(eRFPath = 0; eRFPath < 2; eRFPath++){
printk("====>set channel:%x\n",rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x7, bZebra1_ChannelNum));
udelay(10);
}
}
//--------------------------------------------
switch(priv->ieee80211->mode)
{
case WIRELESS_MODE_A:
case WIRELESS_MODE_N_5G:
if (channel<=14){
RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14");
return false;
}
break;
case WIRELESS_MODE_B:
if (channel>14){
RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14");
return false;
}
break;
case WIRELESS_MODE_G:
case WIRELESS_MODE_N_24G:
if (channel>14){
RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14");
return false;
}
break;
}
//--------------------------------------------
priv->SwChnlInProgress = true;
if(channel == 0)
channel = 1;
priv->chan=channel;
priv->SwChnlStage=0;
priv->SwChnlStep=0;
// schedule_work(&(priv->SwChnlWorkItem));
// rtl8192_SwChnl_WorkItem(dev);
if(priv->up) {
// queue_work(priv->priv_wq,&(priv->SwChnlWorkItem));
rtl8192_SwChnl_WorkItem(dev);
}
priv->SwChnlInProgress = false;
return true;
}
//
/******************************************************************************
*function: Callback routine of the work item for set bandwidth mode.
* input: struct net_device *dev
* HT_CHANNEL_WIDTH Bandwidth //20M or 40M
* HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care
* output: none
* return: none
* Note: I doubt whether SetBWModeInProgress flag is necessary as we can
* test whether current work in the queue or not.//do I?
* ***************************************************************************/
void rtl8192_SetBWModeWorkItem(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 regBwOpMode;
RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem() Switch to %s bandwidth\n", \
priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")
if(priv->rf_chip == RF_PSEUDO_11N)
{
priv->SetBWModeInProgress= false;
return;
}
//<1>Set MAC register
regBwOpMode = read_nic_byte(dev, BW_OPMODE);
switch(priv->CurrentChannelBW)
{
case HT_CHANNEL_WIDTH_20:
regBwOpMode |= BW_OPMODE_20MHZ;
// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
break;
case HT_CHANNEL_WIDTH_20_40:
regBwOpMode &= ~BW_OPMODE_20MHZ;
// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
break;
default:
RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n",priv->CurrentChannelBW);
break;
}
//<2>Set PHY related register
switch(priv->CurrentChannelBW)
{
case HT_CHANNEL_WIDTH_20:
// Add by Vivi 20071119
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
// Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
#if 0
write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
#endif
priv->cck_present_attentuation =
priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
if(priv->cck_present_attentuation > 22)
priv->cck_present_attentuation= 22;
if(priv->cck_present_attentuation< 0)
priv->cck_present_attentuation = 0;
RT_TRACE(COMP_INIT, "20M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation);
if(priv->chan == 14 && !priv->bcck_in_ch14)
{
priv->bcck_in_ch14 = TRUE;
dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
}
else if(priv->chan != 14 && priv->bcck_in_ch14)
{
priv->bcck_in_ch14 = FALSE;
dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
}
else
dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
break;
case HT_CHANNEL_WIDTH_20_40:
// Add by Vivi 20071119
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0);
rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
#if 0
// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000);
write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e);
write_nic_dword(dev, rCCK0_DebugPort, 0x00000409);
#endif
priv->cck_present_attentuation =
priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
if(priv->cck_present_attentuation > 22)
priv->cck_present_attentuation = 22;
if(priv->cck_present_attentuation < 0)
priv->cck_present_attentuation = 0;
RT_TRACE(COMP_INIT, "40M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation);
if(priv->chan == 14 && !priv->bcck_in_ch14)
{
priv->bcck_in_ch14 = true;
dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
}
else if(priv->chan!= 14 && priv->bcck_in_ch14)
{
priv->bcck_in_ch14 = false;
dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
}
else
dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
break;
default:
RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n" ,priv->CurrentChannelBW);
break;
}
//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
#if 1
//<3>Set RF related register
switch( priv->rf_chip )
{
case RF_8225:
#ifdef TO_DO_LIST
PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW);
#endif
break;
case RF_8256:
PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
break;
case RF_8258:
// PHY_SetRF8258Bandwidth();
break;
case RF_PSEUDO_11N:
// Do Nothing
break;
default:
RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip);
break;
}
#endif
priv->SetBWModeInProgress= false;
RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb(), %d", atomic_read(&(priv->ieee80211->atm_swbw)) );
}
/******************************************************************************
*function: This function schedules bandwith switch work.
* input: struct net_device *dev
* HT_CHANNEL_WIDTH Bandwidth //20M or 40M
* HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care
* output: none
* return: none
* Note: I doubt whether SetBWModeInProgress flag is necessary as we can
* test whether current work in the queue or not.//do I?
* ***************************************************************************/
void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset)
{
struct r8192_priv *priv = ieee80211_priv(dev);
if(priv->SetBWModeInProgress)
return;
priv->SetBWModeInProgress= true;
priv->CurrentChannelBW = Bandwidth;
if(Offset==HT_EXTCHNL_OFFSET_LOWER)
priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER;
else if(Offset==HT_EXTCHNL_OFFSET_UPPER)
priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER;
else
priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
//queue_work(priv->priv_wq, &(priv->SetBWModeWorkItem));
// schedule_work(&(priv->SetBWModeWorkItem));
rtl8192_SetBWModeWorkItem(dev);
}
void InitialGain819xUsb(struct net_device *dev, u8 Operation)
{
struct r8192_priv *priv = ieee80211_priv(dev);
priv->InitialGainOperateType = Operation;
if(priv->up)
{
queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0);
}
}
extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq);
struct net_device *dev = priv->ieee80211->dev;
#define SCAN_RX_INITIAL_GAIN 0x17
#define POWER_DETECTION_TH 0x08
u32 BitMask;
u8 initial_gain;
u8 Operation;
Operation = priv->InitialGainOperateType;
switch(Operation)
{
case IG_Backup:
RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n");
initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];//
BitMask = bMaskByte0;
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask);
priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask);
priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask);
priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask);
BitMask = bMaskByte2;
priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask);
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca);
RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", initial_gain);
write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain);
RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", POWER_DETECTION_TH);
write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH);
break;
case IG_Restore:
RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n");
BitMask = 0x7f; //Bit0~ Bit6
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1);
rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1);
rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1);
rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1);
BitMask = bMaskByte2;
rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
#ifdef RTL8190P
SetTxPowerLevel8190(Adapter,priv->CurrentChannel);
#endif
#ifdef RTL8192E
SetTxPowerLevel8190(Adapter,priv->CurrentChannel);
#endif
//#ifdef RTL8192U
rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
//#endif
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON
break;
default:
RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n");
break;
}
}
drivers/staging/rtl8192su/r819xU_phy.h deleted 100644 → 0
View file @ 0f29f587
#ifndef _R819XU_PHY_H
#define _R819XU_PHY_H
/* Channel switch:The size of command tables for switch channel*/
#define MAX_PRECMD_CNT 16
#define MAX_RFDEPENDCMD_CNT 16
#define MAX_POSTCMD_CNT 16
typedef enum _SwChnlCmdID{
CmdID_End,
CmdID_SetTxPowerLevel,
CmdID_BBRegWrite10,
CmdID_WritePortUlong,
CmdID_WritePortUshort,
CmdID_WritePortUchar,
CmdID_RF_WriteReg,
}SwChnlCmdID;
/*--------------------------------Define structure--------------------------------*/
/* 1. Switch channel related */
typedef struct _SwChnlCmd{
SwChnlCmdID CmdID;
u32 Para1;
u32 Para2;
u32 msDelay;
}__attribute__ ((packed)) SwChnlCmd;
extern u32 rtl819XMACPHY_Array_PG[];
extern u32 rtl819XPHY_REG_1T2RArray[];
extern u32 rtl819XAGCTAB_Array[];
extern u32 rtl819XRadioA_Array[];
extern u32 rtl819XRadioB_Array[];
extern u32 rtl819XRadioC_Array[];
extern u32 rtl819XRadioD_Array[];
typedef enum _HW90_BLOCK{
HW90_BLOCK_MAC = 0,
HW90_BLOCK_PHY0 = 1,
HW90_BLOCK_PHY1 = 2,
HW90_BLOCK_RF = 3,
HW90_BLOCK_MAXIMUM = 4, // Never use this
}HW90_BLOCK_E, *PHW90_BLOCK_E;
typedef enum _RF90_RADIO_PATH{
RF90_PATH_A = 0, //Radio Path A
RF90_PATH_B = 1, //Radio Path B
RF90_PATH_C = 2, //Radio Path C
RF90_PATH_D = 3, //Radio Path D
RF90_PATH_MAX //Max RF number 92 support
}RF90_RADIO_PATH_E, *PRF90_RADIO_PATH_E;
#define bMaskByte0 0xff
#define bMaskByte1 0xff00
#define bMaskByte2 0xff0000
#define bMaskByte3 0xff000000
#define bMaskHWord 0xffff0000
#define bMaskLWord 0x0000ffff
#define bMaskDWord 0xffffffff
//extern u32 rtl8192_CalculateBitShift(u32 dwBitMask);
extern u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath);
extern void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData);
extern u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask);
//extern u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset);
//extern void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
extern void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data);
extern u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask);
extern void rtl8192_phy_configmac(struct net_device* dev);
extern void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType);
//extern void rtl8192_InitBBRFRegDef(struct net_device* dev);
extern u8 rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
//extern void rtl8192_BB_Config_ParaFile(struct net_device* dev);
extern void rtl8192_BBConfig(struct net_device* dev);
extern void rtl8192_phy_getTxPower(struct net_device* dev);
extern void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel);
extern void rtl8192_phy_RFConfig(struct net_device* dev);
extern void rtl8192_phy_updateInitGain(struct net_device* dev);
extern u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E eRFPath);
extern u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel);
extern void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
extern void rtl8192_SwChnl_WorkItem(struct net_device *dev);
void rtl8192_SetBWModeWorkItem(struct net_device *dev);
extern bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState);
//added by amy
extern void InitialGain819xUsb(struct net_device *dev, u8 Operation);
extern void InitialGainOperateWorkItemCallBack(struct work_struct *work);
#endif
drivers/staging/rtl8192su/r819xU_phyreg.h deleted 100644 → 0
View file @ 0f29f587
#ifndef _R819XU_PHYREG_H
#define _R819XU_PHYREG_H
#define RF_DATA 0x1d4 // FW will write RF data in the register.
//Register //duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
//page 1
#define rPMAC_Reset 0x100
#define rPMAC_TxStart 0x104
#define rPMAC_TxLegacySIG 0x108
#define rPMAC_TxHTSIG1 0x10c
#define rPMAC_TxHTSIG2 0x110
#define rPMAC_PHYDebug 0x114
#define rPMAC_TxPacketNum 0x118
#define rPMAC_TxIdle 0x11c
#define rPMAC_TxMACHeader0 0x120
#define rPMAC_TxMACHeader1 0x124
#define rPMAC_TxMACHeader2 0x128
#define rPMAC_TxMACHeader3 0x12c
#define rPMAC_TxMACHeader4 0x130
#define rPMAC_TxMACHeader5 0x134
#define rPMAC_TxDataType 0x138
#define rPMAC_TxRandomSeed 0x13c
#define rPMAC_CCKPLCPPreamble 0x140
#define rPMAC_CCKPLCPHeader 0x144
#define rPMAC_CCKCRC16 0x148
#define rPMAC_OFDMRxCRC32OK 0x170
#define rPMAC_OFDMRxCRC32Er 0x174
#define rPMAC_OFDMRxParityEr 0x178
#define rPMAC_OFDMRxCRC8Er 0x17c
#define rPMAC_CCKCRxRC16Er 0x180
#define rPMAC_CCKCRxRC32Er 0x184
#define rPMAC_CCKCRxRC32OK 0x188
#define rPMAC_TxStatus 0x18c
//page8
#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC
#define rFPGA0_TxInfo 0x804
#define rFPGA0_PSDFunction 0x808
#define rFPGA0_TxGainStage 0x80c
#define rFPGA0_RFTiming1 0x810
#define rFPGA0_RFTiming2 0x814
//#define rFPGA0_XC_RFTiming 0x818
//#define rFPGA0_XD_RFTiming 0x81c
#define rFPGA0_XA_HSSIParameter1 0x820
#define rFPGA0_XA_HSSIParameter2 0x824
#define rFPGA0_XB_HSSIParameter1 0x828
#define rFPGA0_XB_HSSIParameter2 0x82c
#define rFPGA0_XC_HSSIParameter1 0x830
#define rFPGA0_XC_HSSIParameter2 0x834
#define rFPGA0_XD_HSSIParameter1 0x838
#define rFPGA0_XD_HSSIParameter2 0x83c
#define rFPGA0_XA_LSSIParameter 0x840
#define rFPGA0_XB_LSSIParameter 0x844
#define rFPGA0_XC_LSSIParameter 0x848
#define rFPGA0_XD_LSSIParameter 0x84c
#define rFPGA0_RFWakeUpParameter 0x850
#define rFPGA0_RFSleepUpParameter 0x854
#define rFPGA0_XAB_SwitchControl 0x858
#define rFPGA0_XCD_SwitchControl 0x85c
#define rFPGA0_XA_RFInterfaceOE 0x860
#define rFPGA0_XB_RFInterfaceOE 0x864
#define rFPGA0_XC_RFInterfaceOE 0x868
#define rFPGA0_XD_RFInterfaceOE 0x86c
#define rFPGA0_XAB_RFInterfaceSW 0x870
#define rFPGA0_XCD_RFInterfaceSW 0x874
#define rFPGA0_XAB_RFParameter 0x878
#define rFPGA0_XCD_RFParameter 0x87c
#define rFPGA0_AnalogParameter1 0x880
#define rFPGA0_AnalogParameter2 0x884
#define rFPGA0_AnalogParameter3 0x888
#define rFPGA0_AnalogParameter4 0x88c
#define rFPGA0_XA_LSSIReadBack 0x8a0
#define rFPGA0_XB_LSSIReadBack 0x8a4
#define rFPGA0_XC_LSSIReadBack 0x8a8
#define rFPGA0_XD_LSSIReadBack 0x8ac
#define rFPGA0_PSDReport 0x8b4
#define rFPGA0_XAB_RFInterfaceRB 0x8e0
#define rFPGA0_XCD_RFInterfaceRB 0x8e4
//page 9
#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC
#define rFPGA1_TxBlock 0x904
#define rFPGA1_DebugSelect 0x908
#define rFPGA1_TxInfo 0x90c
//page a
#define rCCK0_System 0xa00
#define rCCK0_AFESetting 0xa04
#define rCCK0_CCA 0xa08
#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level
#define rCCK0_RxAGC2 0xa10 //AGC & DAGC
#define rCCK0_RxHP 0xa14
#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold
#define rCCK0_DSPParameter2 0xa1c //SQ threshold
#define rCCK0_TxFilter1 0xa20
#define rCCK0_TxFilter2 0xa24
#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3
#define rCCK0_FalseAlarmReport 0xa2c //0xa2d
#define rCCK0_TRSSIReport 0xa50
#define rCCK0_RxReport 0xa54 //0xa57
#define rCCK0_FACounterLower 0xa5c //0xa5b
#define rCCK0_FACounterUpper 0xa58 //0xa5c
//page c
#define rOFDM0_LSTF 0xc00
#define rOFDM0_TRxPathEnable 0xc04
#define rOFDM0_TRMuxPar 0xc08
#define rOFDM0_TRSWIsolation 0xc0c
#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter
#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix
#define rOFDM0_XBRxAFE 0xc18
#define rOFDM0_XBRxIQImbalance 0xc1c
#define rOFDM0_XCRxAFE 0xc20
#define rOFDM0_XCRxIQImbalance 0xc24
#define rOFDM0_XDRxAFE 0xc28
#define rOFDM0_XDRxIQImbalance 0xc2c
#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD
#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync.
#define rOFDM0_RxDetector3 0xc38 //Frame Sync.
#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI
#define rOFDM0_RxDSP 0xc40 //Rx Sync Path
#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC
#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold
#define rOFDM0_ECCAThreshold 0xc4c // energy CCA
#define rOFDM0_XAAGCCore1 0xc50
#define rOFDM0_XAAGCCore2 0xc54
#define rOFDM0_XBAGCCore1 0xc58
#define rOFDM0_XBAGCCore2 0xc5c
#define rOFDM0_XCAGCCore1 0xc60
#define rOFDM0_XCAGCCore2 0xc64
#define rOFDM0_XDAGCCore1 0xc68
#define rOFDM0_XDAGCCore2 0xc6c
#define rOFDM0_AGCParameter1 0xc70
#define rOFDM0_AGCParameter2 0xc74
#define rOFDM0_AGCRSSITable 0xc78
#define rOFDM0_HTSTFAGC 0xc7c
#define rOFDM0_XATxIQImbalance 0xc80
#define rOFDM0_XATxAFE 0xc84
#define rOFDM0_XBTxIQImbalance 0xc88
#define rOFDM0_XBTxAFE 0xc8c
#define rOFDM0_XCTxIQImbalance 0xc90
#define rOFDM0_XCTxAFE 0xc94
#define rOFDM0_XDTxIQImbalance 0xc98
#define rOFDM0_XDTxAFE 0xc9c
#define rOFDM0_RxHPParameter 0xce0
#define rOFDM0_TxPseudoNoiseWgt 0xce4
#define rOFDM0_FrameSync 0xcf0
#define rOFDM0_DFSReport 0xcf4
#define rOFDM0_TxCoeff1 0xca4
#define rOFDM0_TxCoeff2 0xca8
#define rOFDM0_TxCoeff3 0xcac
#define rOFDM0_TxCoeff4 0xcb0
#define rOFDM0_TxCoeff5 0xcb4
#define rOFDM0_TxCoeff6 0xcb8
//page d
#define rOFDM1_LSTF 0xd00
#define rOFDM1_TRxPathEnable 0xd04
#define rOFDM1_CFO 0xd08
#define rOFDM1_CSI1 0xd10
#define rOFDM1_SBD 0xd14
#define rOFDM1_CSI2 0xd18
#define rOFDM1_CFOTracking 0xd2c
#define rOFDM1_TRxMesaure1 0xd34
#define rOFDM1_IntfDet 0xd3c
#define rOFDM1_PseudoNoiseStateAB 0xd50
#define rOFDM1_PseudoNoiseStateCD 0xd54
#define rOFDM1_RxPseudoNoiseWgt 0xd58
#define rOFDM_PHYCounter1 0xda0 //cca, parity fail
#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail
#define rOFDM_PHYCounter3 0xda8 //MCS not support
#define rOFDM_ShortCFOAB 0xdac
#define rOFDM_ShortCFOCD 0xdb0
#define rOFDM_LongCFOAB 0xdb4
#define rOFDM_LongCFOCD 0xdb8
#define rOFDM_TailCFOAB 0xdbc
#define rOFDM_TailCFOCD 0xdc0
#define rOFDM_PWMeasure1 0xdc4
#define rOFDM_PWMeasure2 0xdc8
#define rOFDM_BWReport 0xdcc
#define rOFDM_AGCReport 0xdd0
#define rOFDM_RxSNR 0xdd4
#define rOFDM_RxEVMCSI 0xdd8
#define rOFDM_SIGReport 0xddc
//page e
#define rTxAGC_Rate18_06 0xe00
#define rTxAGC_Rate54_24 0xe04
#define rTxAGC_CCK_Mcs32 0xe08
#define rTxAGC_Mcs03_Mcs00 0xe10
#define rTxAGC_Mcs07_Mcs04 0xe14
#define rTxAGC_Mcs11_Mcs08 0xe18
#define rTxAGC_Mcs15_Mcs12 0xe1c
//RF
//Zebra1
#define rZebra1_HSSIEnable 0x0
#define rZebra1_TRxEnable1 0x1
#define rZebra1_TRxEnable2 0x2
#define rZebra1_AGC 0x4
#define rZebra1_ChargePump 0x5
#define rZebra1_Channel 0x7
#define rZebra1_TxGain 0x8
#define rZebra1_TxLPF 0x9
#define rZebra1_RxLPF 0xb
#define rZebra1_RxHPFCorner 0xc
//Zebra4
#define rGlobalCtrl 0
#define rRTL8256_TxLPF 19
#define rRTL8256_RxLPF 11
//RTL8258
#define rRTL8258_TxLPF 0x11
#define rRTL8258_RxLPF 0x13
#define rRTL8258_RSSILPF 0xa
//Bit Mask
//page-1
#define bBBResetB 0x100
#define bGlobalResetB 0x200
#define bOFDMTxStart 0x4
#define bCCKTxStart 0x8
#define bCRC32Debug 0x100
#define bPMACLoopback 0x10
#define bTxLSIG 0xffffff
#define bOFDMTxRate 0xf
#define bOFDMTxReserved 0x10
#define bOFDMTxLength 0x1ffe0
#define bOFDMTxParity 0x20000
#define bTxHTSIG1 0xffffff
#define bTxHTMCSRate 0x7f
#define bTxHTBW 0x80
#define bTxHTLength 0xffff00
#define bTxHTSIG2 0xffffff
#define bTxHTSmoothing 0x1
#define bTxHTSounding 0x2
#define bTxHTReserved 0x4
#define bTxHTAggreation 0x8
#define bTxHTSTBC 0x30
#define bTxHTAdvanceCoding 0x40
#define bTxHTShortGI 0x80
#define bTxHTNumberHT_LTF 0x300
#define bTxHTCRC8 0x3fc00
#define bCounterReset 0x10000
#define bNumOfOFDMTx 0xffff
#define bNumOfCCKTx 0xffff0000
#define bTxIdleInterval 0xffff
#define bOFDMService 0xffff0000
#define bTxMACHeader 0xffffffff
#define bTxDataInit 0xff
#define bTxHTMode 0x100
#define bTxDataType 0x30000
#define bTxRandomSeed 0xffffffff
#define bCCKTxPreamble 0x1
#define bCCKTxSFD 0xffff0000
#define bCCKTxSIG 0xff
#define bCCKTxService 0xff00
#define bCCKLengthExt 0x8000
#define bCCKTxLength 0xffff0000
#define bCCKTxCRC16 0xffff
#define bCCKTxStatus 0x1
#define bOFDMTxStatus 0x2
//page-8
#define bRFMOD 0x1
#define bJapanMode 0x2
#define bCCKTxSC 0x30
#define bCCKEn 0x1000000
#define bOFDMEn 0x2000000
#define bOFDMRxADCPhase 0x10000
#define bOFDMTxDACPhase 0x40000
#define bXATxAGC 0x3f
#define bXBTxAGC 0xf00
#define bXCTxAGC 0xf000
#define bXDTxAGC 0xf0000
#define bPAStart 0xf0000000
#define bTRStart 0x00f00000
#define bRFStart 0x0000f000
#define bBBStart 0x000000f0
#define bBBCCKStart 0x0000000f
#define bPAEnd 0xf //Reg0x814
#define bTREnd 0x0f000000
#define bRFEnd 0x000f0000
#define bCCAMask 0x000000f0 //T2R
#define bR2RCCAMask 0x00000f00
#define bHSSI_R2TDelay 0xf8000000
#define bHSSI_T2RDelay 0xf80000
#define bContTxHSSI 0x400 //chane gain at continue Tx
#define bIGFromCCK 0x200
#define bAGCAddress 0x3f
#define bRxHPTx 0x7000
#define bRxHPT2R 0x38000
#define bRxHPCCKIni 0xc0000
#define bAGCTxCode 0xc00000
#define bAGCRxCode 0x300000
#define b3WireDataLength 0x800
#define b3WireAddressLength 0x400
#define b3WireRFPowerDown 0x1
//#define bHWSISelect 0x8
#define b5GPAPEPolarity 0x40000000
#define b2GPAPEPolarity 0x80000000
#define bRFSW_TxDefaultAnt 0x3
#define bRFSW_TxOptionAnt 0x30
#define bRFSW_RxDefaultAnt 0x300
#define bRFSW_RxOptionAnt 0x3000
#define bRFSI_3WireData 0x1
#define bRFSI_3WireClock 0x2
#define bRFSI_3WireLoad 0x4
#define bRFSI_3WireRW 0x8
#define bRFSI_3Wire 0xf //3-wire total control
#define bRFSI_RFENV 0x10
#define bRFSI_TRSW 0x20
#define bRFSI_TRSWB 0x40
#define bRFSI_ANTSW 0x100
#define bRFSI_ANTSWB 0x200
#define bRFSI_PAPE 0x400
#define bRFSI_PAPE5G 0x800
#define bBandSelect 0x1
#define bHTSIG2_GI 0x80
#define bHTSIG2_Smoothing 0x01
#define bHTSIG2_Sounding 0x02
#define bHTSIG2_Aggreaton 0x08
#define bHTSIG2_STBC 0x30
#define bHTSIG2_AdvCoding 0x40
#define bHTSIG2_NumOfHTLTF 0x300
#define bHTSIG2_CRC8 0x3fc
#define bHTSIG1_MCS 0x7f
#define bHTSIG1_BandWidth 0x80
#define bHTSIG1_HTLength 0xffff
#define bLSIG_Rate 0xf
#define bLSIG_Reserved 0x10
#define bLSIG_Length 0x1fffe
#define bLSIG_Parity 0x20
#define bCCKRxPhase 0x4
#define bLSSIReadAddress 0x3f000000 //LSSI "Read" Address
#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal
#define bLSSIReadBackData 0xfff
#define bLSSIReadOKFlag 0x1000
#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz
#define bRegulator0Standby 0x1
#define bRegulatorPLLStandby 0x2
#define bRegulator1Standby 0x4
#define bPLLPowerUp 0x8
#define bDPLLPowerUp 0x10
#define bDA10PowerUp 0x20
#define bAD7PowerUp 0x200
#define bDA6PowerUp 0x2000
#define bXtalPowerUp 0x4000
#define b40MDClkPowerUP 0x8000
#define bDA6DebugMode 0x20000
#define bDA6Swing 0x380000
#define bADClkPhase 0x4000000
#define b80MClkDelay 0x18000000
#define bAFEWatchDogEnable 0x20000000
#define bXtalCap 0x0f000000
#define bIntDifClkEnable 0x400
#define bExtSigClkEnable 0x800
#define bBandgapMbiasPowerUp 0x10000
#define bAD11SHGain 0xc0000
#define bAD11InputRange 0x700000
#define bAD11OPCurrent 0x3800000
#define bIPathLoopback 0x4000000
#define bQPathLoopback 0x8000000
#define bAFELoopback 0x10000000
#define bDA10Swing 0x7e0
#define bDA10Reverse 0x800
#define bDAClkSource 0x1000
#define bAD7InputRange 0x6000
#define bAD7Gain 0x38000
#define bAD7OutputCMMode 0x40000
#define bAD7InputCMMode 0x380000
#define bAD7Current 0xc00000
#define bRegulatorAdjust 0x7000000
#define bAD11PowerUpAtTx 0x1
#define bDA10PSAtTx 0x10
#define bAD11PowerUpAtRx 0x100
#define bDA10PSAtRx 0x1000
#define bCCKRxAGCFormat 0x200
#define bPSDFFTSamplepPoint 0xc000
#define bPSDAverageNum 0x3000
#define bIQPathControl 0xc00
#define bPSDFreq 0x3ff
#define bPSDAntennaPath 0x30
#define bPSDIQSwitch 0x40
#define bPSDRxTrigger 0x400000
#define bPSDTxTrigger 0x80000000
#define bPSDSineToneScale 0x7f000000
#define bPSDReport 0xffff
//page-9
#define bOFDMTxSC 0x30000000
#define bCCKTxOn 0x1
#define bOFDMTxOn 0x2
#define bDebugPage 0xfff //reset debug page and also HWord, LWord
#define bDebugItem 0xff //reset debug page and LWord
#define bAntL 0x10
#define bAntNonHT 0x100
#define bAntHT1 0x1000
#define bAntHT2 0x10000
#define bAntHT1S1 0x100000
#define bAntNonHTS1 0x1000000
//page-a
#define bCCKBBMode 0x3
#define bCCKTxPowerSaving 0x80
#define bCCKRxPowerSaving 0x40
#define bCCKSideBand 0x10
#define bCCKScramble 0x8
#define bCCKAntDiversity 0x8000
#define bCCKCarrierRecovery 0x4000
#define bCCKTxRate 0x3000
#define bCCKDCCancel 0x0800
#define bCCKISICancel 0x0400
#define bCCKMatchFilter 0x0200
#define bCCKEqualizer 0x0100
#define bCCKPreambleDetect 0x800000
#define bCCKFastFalseCCA 0x400000
#define bCCKChEstStart 0x300000
#define bCCKCCACount 0x080000
#define bCCKcs_lim 0x070000
#define bCCKBistMode 0x80000000
#define bCCKCCAMask 0x40000000
#define bCCKTxDACPhase 0x4
#define bCCKRxADCPhase 0x20000000 //r_rx_clk
#define bCCKr_cp_mode0 0x0100
#define bCCKTxDCOffset 0xf0
#define bCCKRxDCOffset 0xf
#define bCCKCCAMode 0xc000
#define bCCKFalseCS_lim 0x3f00
#define bCCKCS_ratio 0xc00000
#define bCCKCorgBit_sel 0x300000
#define bCCKPD_lim 0x0f0000
#define bCCKNewCCA 0x80000000
#define bCCKRxHPofIG 0x8000
#define bCCKRxIG 0x7f00
#define bCCKLNAPolarity 0x800000
#define bCCKRx1stGain 0x7f0000
#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity
#define bCCKRxAGCSatLevel 0x1f000000
#define bCCKRxAGCSatCount 0xe0
#define bCCKRxRFSettle 0x1f //AGCsamp_dly
#define bCCKFixedRxAGC 0x8000
//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824
#define bCCKAntennaPolarity 0x2000
#define bCCKTxFilterType 0x0c00
#define bCCKRxAGCReportType 0x0300
#define bCCKRxDAGCEn 0x80000000
#define bCCKRxDAGCPeriod 0x20000000
#define bCCKRxDAGCSatLevel 0x1f000000
#define bCCKTimingRecovery 0x800000
#define bCCKTxC0 0x3f0000
#define bCCKTxC1 0x3f000000
#define bCCKTxC2 0x3f
#define bCCKTxC3 0x3f00
#define bCCKTxC4 0x3f0000
#define bCCKTxC5 0x3f000000
#define bCCKTxC6 0x3f
#define bCCKTxC7 0x3f00
#define bCCKDebugPort 0xff0000
#define bCCKDACDebug 0x0f000000
#define bCCKFalseAlarmEnable 0x8000
#define bCCKFalseAlarmRead 0x4000
#define bCCKTRSSI 0x7f
#define bCCKRxAGCReport 0xfe
#define bCCKRxReport_AntSel 0x80000000
#define bCCKRxReport_MFOff 0x40000000
#define bCCKRxRxReport_SQLoss 0x20000000
#define bCCKRxReport_Pktloss 0x10000000
#define bCCKRxReport_Lockedbit 0x08000000
#define bCCKRxReport_RateError 0x04000000
#define bCCKRxReport_RxRate 0x03000000
#define bCCKRxFACounterLower 0xff
#define bCCKRxFACounterUpper 0xff000000
#define bCCKRxHPAGCStart 0xe000
#define bCCKRxHPAGCFinal 0x1c00
#define bCCKRxFalseAlarmEnable 0x8000
#define bCCKFACounterFreeze 0x4000
#define bCCKTxPathSel 0x10000000
#define bCCKDefaultRxPath 0xc000000
#define bCCKOptionRxPath 0x3000000
//page c
#define bNumOfSTF 0x3
#define bShift_L 0xc0
#define bGI_TH 0xc
#define bRxPathA 0x1
#define bRxPathB 0x2
#define bRxPathC 0x4
#define bRxPathD 0x8
#define bTxPathA 0x1
#define bTxPathB 0x2
#define bTxPathC 0x4
#define bTxPathD 0x8
#define bTRSSIFreq 0x200
#define bADCBackoff 0x3000
#define bDFIRBackoff 0xc000
#define bTRSSILatchPhase 0x10000
#define bRxIDCOffset 0xff
#define bRxQDCOffset 0xff00
#define bRxDFIRMode 0x1800000
#define bRxDCNFType 0xe000000
#define bRXIQImb_A 0x3ff
#define bRXIQImb_B 0xfc00
#define bRXIQImb_C 0x3f0000
#define bRXIQImb_D 0xffc00000
#define bDC_dc_Notch 0x60000
#define bRxNBINotch 0x1f000000
#define bPD_TH 0xf
#define bPD_TH_Opt2 0xc000
#define bPWED_TH 0x700
#define bIfMF_Win_L 0x800
#define bPD_Option 0x1000
#define bMF_Win_L 0xe000
#define bBW_Search_L 0x30000
#define bwin_enh_L 0xc0000
#define bBW_TH 0x700000
#define bED_TH2 0x3800000
#define bBW_option 0x4000000
#define bRatio_TH 0x18000000
#define bWindow_L 0xe0000000
#define bSBD_Option 0x1
#define bFrame_TH 0x1c
#define bFS_Option 0x60
#define bDC_Slope_check 0x80
#define bFGuard_Counter_DC_L 0xe00
#define bFrame_Weight_Short 0x7000
#define bSub_Tune 0xe00000
#define bFrame_DC_Length 0xe000000
#define bSBD_start_offset 0x30000000
#define bFrame_TH_2 0x7
#define bFrame_GI2_TH 0x38
#define bGI2_Sync_en 0x40
#define bSarch_Short_Early 0x300
#define bSarch_Short_Late 0xc00
#define bSarch_GI2_Late 0x70000
#define bCFOAntSum 0x1
#define bCFOAcc 0x2
#define bCFOStartOffset 0xc
#define bCFOLookBack 0x70
#define bCFOSumWeight 0x80
#define bDAGCEnable 0x10000
#define bTXIQImb_A 0x3ff
#define bTXIQImb_B 0xfc00
#define bTXIQImb_C 0x3f0000
#define bTXIQImb_D 0xffc00000
#define bTxIDCOffset 0xff
#define bTxQDCOffset 0xff00
#define bTxDFIRMode 0x10000
#define bTxPesudoNoiseOn 0x4000000
#define bTxPesudoNoise_A 0xff
#define bTxPesudoNoise_B 0xff00
#define bTxPesudoNoise_C 0xff0000
#define bTxPesudoNoise_D 0xff000000
#define bCCADropOption 0x20000
#define bCCADropThres 0xfff00000
#define bEDCCA_H 0xf
#define bEDCCA_L 0xf0
#define bLambda_ED 0x300
#define bRxInitialGain 0x7f
#define bRxAntDivEn 0x80
#define bRxAGCAddressForLNA 0x7f00
#define bRxHighPowerFlow 0x8000
#define bRxAGCFreezeThres 0xc0000
#define bRxFreezeStep_AGC1 0x300000
#define bRxFreezeStep_AGC2 0xc00000
#define bRxFreezeStep_AGC3 0x3000000
#define bRxFreezeStep_AGC0 0xc000000
#define bRxRssi_Cmp_En 0x10000000
#define bRxQuickAGCEn 0x20000000
#define bRxAGCFreezeThresMode 0x40000000
#define bRxOverFlowCheckType 0x80000000
#define bRxAGCShift 0x7f
#define bTRSW_Tri_Only 0x80
#define bPowerThres 0x300
#define bRxAGCEn 0x1
#define bRxAGCTogetherEn 0x2
#define bRxAGCMin 0x4
#define bRxHP_Ini 0x7
#define bRxHP_TRLNA 0x70
#define bRxHP_RSSI 0x700
#define bRxHP_BBP1 0x7000
#define bRxHP_BBP2 0x70000
#define bRxHP_BBP3 0x700000
#define bRSSI_H 0x7f0000 //the threshold for high power
#define bRSSI_Gen 0x7f000000 //the threshold for ant diversity
#define bRxSettle_TRSW 0x7
#define bRxSettle_LNA 0x38
#define bRxSettle_RSSI 0x1c0
#define bRxSettle_BBP 0xe00
#define bRxSettle_RxHP 0x7000
#define bRxSettle_AntSW_RSSI 0x38000
#define bRxSettle_AntSW 0xc0000
#define bRxProcessTime_DAGC 0x300000
#define bRxSettle_HSSI 0x400000
#define bRxProcessTime_BBPPW 0x800000
#define bRxAntennaPowerShift 0x3000000
#define bRSSITableSelect 0xc000000
#define bRxHP_Final 0x7000000
#define bRxHTSettle_BBP 0x7
#define bRxHTSettle_HSSI 0x8
#define bRxHTSettle_RxHP 0x70
#define bRxHTSettle_BBPPW 0x80
#define bRxHTSettle_Idle 0x300
#define bRxHTSettle_Reserved 0x1c00
#define bRxHTRxHPEn 0x8000
#define bRxHTAGCFreezeThres 0x30000
#define bRxHTAGCTogetherEn 0x40000
#define bRxHTAGCMin 0x80000
#define bRxHTAGCEn 0x100000
#define bRxHTDAGCEn 0x200000
#define bRxHTRxHP_BBP 0x1c00000
#define bRxHTRxHP_Final 0xe0000000
#define bRxPWRatioTH 0x3
#define bRxPWRatioEn 0x4
#define bRxMFHold 0x3800
#define bRxPD_Delay_TH1 0x38
#define bRxPD_Delay_TH2 0x1c0
#define bRxPD_DC_COUNT_MAX 0x600
//#define bRxMF_Hold 0x3800
#define bRxPD_Delay_TH 0x8000
#define bRxProcess_Delay 0xf0000
#define bRxSearchrange_GI2_Early 0x700000
#define bRxFrame_Guard_Counter_L 0x3800000
#define bRxSGI_Guard_L 0xc000000
#define bRxSGI_Search_L 0x30000000
#define bRxSGI_TH 0xc0000000
#define bDFSCnt0 0xff
#define bDFSCnt1 0xff00
#define bDFSFlag 0xf0000
#define bMFWeightSum 0x300000
#define bMinIdxTH 0x7f000000
#define bDAFormat 0x40000
#define bTxChEmuEnable 0x01000000
#define bTRSWIsolation_A 0x7f
#define bTRSWIsolation_B 0x7f00
#define bTRSWIsolation_C 0x7f0000
#define bTRSWIsolation_D 0x7f000000
#define bExtLNAGain 0x7c00
//page d
#define bSTBCEn 0x4
#define bAntennaMapping 0x10
#define bNss 0x20
#define bCFOAntSumD 0x200
#define bPHYCounterReset 0x8000000
#define bCFOReportGet 0x4000000
#define bOFDMContinueTx 0x10000000
#define bOFDMSingleCarrier 0x20000000
#define bOFDMSingleTone 0x40000000
//#define bRxPath1 0x01
//#define bRxPath2 0x02
//#define bRxPath3 0x04
//#define bRxPath4 0x08
//#define bTxPath1 0x10
//#define bTxPath2 0x20
#define bHTDetect 0x100
#define bCFOEn 0x10000
#define bCFOValue 0xfff00000
#define bSigTone_Re 0x3f
#define bSigTone_Im 0x7f00
#define bCounter_CCA 0xffff
#define bCounter_ParityFail 0xffff0000
#define bCounter_RateIllegal 0xffff
#define bCounter_CRC8Fail 0xffff0000
#define bCounter_MCSNoSupport 0xffff
#define bCounter_FastSync 0xffff
#define bShortCFO 0xfff
#define bShortCFOTLength 12 //total
#define bShortCFOFLength 11 //fraction
#define bLongCFO 0x7ff
#define bLongCFOTLength 11
#define bLongCFOFLength 11
#define bTailCFO 0x1fff
#define bTailCFOTLength 13
#define bTailCFOFLength 12
#define bmax_en_pwdB 0xffff
#define bCC_power_dB 0xffff0000
#define bnoise_pwdB 0xffff
#define bPowerMeasTLength 10
#define bPowerMeasFLength 3
#define bRx_HT_BW 0x1
#define bRxSC 0x6
#define bRx_HT 0x8
#define bNB_intf_det_on 0x1
#define bIntf_win_len_cfg 0x30
#define bNB_Intf_TH_cfg 0x1c0
#define bRFGain 0x3f
#define bTableSel 0x40
#define bTRSW 0x80
#define bRxSNR_A 0xff
#define bRxSNR_B 0xff00
#define bRxSNR_C 0xff0000
#define bRxSNR_D 0xff000000
#define bSNREVMTLength 8
#define bSNREVMFLength 1
#define bCSI1st 0xff
#define bCSI2nd 0xff00
#define bRxEVM1st 0xff0000
#define bRxEVM2nd 0xff000000
#define bSIGEVM 0xff
#define bPWDB 0xff00
#define bSGIEN 0x10000
#define bSFactorQAM1 0xf
#define bSFactorQAM2 0xf0
#define bSFactorQAM3 0xf00
#define bSFactorQAM4 0xf000
#define bSFactorQAM5 0xf0000
#define bSFactorQAM6 0xf0000
#define bSFactorQAM7 0xf00000
#define bSFactorQAM8 0xf000000
#define bSFactorQAM9 0xf0000000
#define bCSIScheme 0x100000
#define bNoiseLvlTopSet 0x3
#define bChSmooth 0x4
#define bChSmoothCfg1 0x38
#define bChSmoothCfg2 0x1c0
#define bChSmoothCfg3 0xe00
#define bChSmoothCfg4 0x7000
#define bMRCMode 0x800000
#define bTHEVMCfg 0x7000000
#define bLoopFitType 0x1
#define bUpdCFO 0x40
#define bUpdCFOOffData 0x80
#define bAdvUpdCFO 0x100
#define bAdvTimeCtrl 0x800
#define bUpdClko 0x1000
#define bFC 0x6000
#define bTrackingMode 0x8000
#define bPhCmpEnable 0x10000
#define bUpdClkoLTF 0x20000
#define bComChCFO 0x40000
#define bCSIEstiMode 0x80000
#define bAdvUpdEqz 0x100000
#define bUChCfg 0x7000000
#define bUpdEqz 0x8000000
//page e
#define bTxAGCRate18_06 0x7f7f7f7f
#define bTxAGCRate54_24 0x7f7f7f7f
#define bTxAGCRateMCS32 0x7f
#define bTxAGCRateCCK 0x7f00
#define bTxAGCRateMCS3_MCS0 0x7f7f7f7f
#define bTxAGCRateMCS7_MCS4 0x7f7f7f7f
#define bTxAGCRateMCS11_MCS8 0x7f7f7f7f
#define bTxAGCRateMCS15_MCS12 0x7f7f7f7f
//Rx Pseduo noise
#define bRxPesudoNoiseOn 0x20000000
#define bRxPesudoNoise_A 0xff
#define bRxPesudoNoise_B 0xff00
#define bRxPesudoNoise_C 0xff0000
#define bRxPesudoNoise_D 0xff000000
#define bPesudoNoiseState_A 0xffff
#define bPesudoNoiseState_B 0xffff0000
#define bPesudoNoiseState_C 0xffff
#define bPesudoNoiseState_D 0xffff0000
//RF
//Zebra1
#define bZebra1_HSSIEnable 0x8
#define bZebra1_TRxControl 0xc00
#define bZebra1_TRxGainSetting 0x07f
#define bZebra1_RxCorner 0xc00
#define bZebra1_TxChargePump 0x38
#define bZebra1_RxChargePump 0x7
#define bZebra1_ChannelNum 0xf80
#define bZebra1_TxLPFBW 0x400
#define bZebra1_RxLPFBW 0x600
//Zebra4
#define bRTL8256RegModeCtrl1 0x100
#define bRTL8256RegModeCtrl0 0x40
#define bRTL8256_TxLPFBW 0x18
#define bRTL8256_RxLPFBW 0x600
//RTL8258
#define bRTL8258_TxLPFBW 0xc
#define bRTL8258_RxLPFBW 0xc00
#define bRTL8258_RSSILPFBW 0xc0
//byte endable for sb_write
#define bByte0 0x1
#define bByte1 0x2
#define bByte2 0x4
#define bByte3 0x8
#define bWord0 0x3
#define bWord1 0xc
#define bDWord 0xf
//for PutRegsetting & GetRegSetting BitMask
#define bMaskByte0 0xff
#define bMaskByte1 0xff00
#define bMaskByte2 0xff0000
#define bMaskByte3 0xff000000
#define bMaskHWord 0xffff0000
#define bMaskLWord 0x0000ffff
#define bMaskDWord 0xffffffff
//for PutRFRegsetting & GetRFRegSetting BitMask
#define bMask12Bits 0xfff
#define bEnable 0x1
#define bDisable 0x0
#define LeftAntenna 0x0
#define RightAntenna 0x1
#define tCheckTxStatus 500 //500ms
#define tUpdateRxCounter 100 //100ms
#define rateCCK 0
#define rateOFDM 1
#define rateHT 2
//define Register-End
#define bPMAC_End 0x1ff
#define bFPGAPHY0_End 0x8ff
#define bFPGAPHY1_End 0x9ff
#define bCCKPHY0_End 0xaff
#define bOFDMPHY0_End 0xcff
#define bOFDMPHY1_End 0xdff
//define max debug item in each debug page
//#define bMaxItem_FPGA_PHY0 0x9
//#define bMaxItem_FPGA_PHY1 0x3
//#define bMaxItem_PHY_11B 0x16
//#define bMaxItem_OFDM_PHY0 0x29
//#define bMaxItem_OFDM_PHY1 0x0
#define bPMACControl 0x0
#define bWMACControl 0x1
#define bWNICControl 0x2
#define PathA 0x0
#define PathB 0x1
#define PathC 0x2
#define PathD 0x3
#define rRTL8256RxMixerPole 0xb
#define bZebraRxMixerPole 0x6
#define rRTL8256TxBBOPBias 0x9
#define bRTL8256TxBBOPBias 0x400
#define rRTL8256TxBBBW 19
#define bRTL8256TxBBBW 0x18
#endif //__INC_HAL8190PCIPHYREG_H
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7