Staging: rtl8192su: remove unused files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rtl8192su/r819xU_firmware.h

-#ifndef __INC_FIRMWARE_H
-#define __INC_FIRMWARE_H
-
-#define RTL8190_CPU_START_OFFSET	0x80
-/* TODO: this definition is TBD */
-//#define USB_HWDESC_HEADER_LEN	0
-
-/* It should be double word alignment */
-//#if DEV_BUS_TYPE==PCI_INTERFACE
-//#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	4*(v/4) - 8
-//#else
-#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	(4*(v/4) - 8 - USB_HWDESC_HEADER_LEN)
-//#endif
-
-typedef enum _firmware_init_step{
-	FW_INIT_STEP0_BOOT = 0,
-	FW_INIT_STEP1_MAIN = 1,
-	FW_INIT_STEP2_DATA = 2,
-}firmware_init_step_e;
-
-typedef enum _opt_rst_type{
-	OPT_SYSTEM_RESET = 0,
-	OPT_FIRMWARE_RESET = 1,
-}opt_rst_type_e;
-
-/* due to rtl8192 firmware */
-typedef enum _desc_packet_type_e{
-	DESC_PACKET_TYPE_INIT = 0,
-	DESC_PACKET_TYPE_NORMAL = 1,
-}desc_packet_type_e;
-
-typedef enum _firmware_source{
-	FW_SOURCE_IMG_FILE = 0,
-	FW_SOURCE_HEADER_FILE = 1,              //from header file
-}firmware_source_e, *pfirmware_source_e;
-
-typedef enum _firmware_status{
-	FW_STATUS_0_INIT = 0,
-	FW_STATUS_1_MOVE_BOOT_CODE = 1,
-	FW_STATUS_2_MOVE_MAIN_CODE = 2,
-	FW_STATUS_3_TURNON_CPU = 3,
-	FW_STATUS_4_MOVE_DATA_CODE = 4,
-	FW_STATUS_5_READY = 5,
-}firmware_status_e;
-
-typedef struct _rt_firmare_seg_container {
-	u16     seg_size;
-	u8      *seg_ptr;
-}fw_seg_container, *pfw_seg_container;
-
-#define RTL8190_MAX_FIRMWARE_CODE_SIZE  64000   //64k
-#define MAX_FW_INIT_STEP                3
-typedef struct _rt_firmware{
-	firmware_status_e firmware_status;
-	u16               cmdpacket_frag_thresold;
-	u8                firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
-	u16               firmware_buf_size[MAX_FW_INIT_STEP];
-}rt_firmware, *prt_firmware;
-
-typedef struct _rt_firmware_info_819xUsb{
-	u8		sz_info[16];
-}rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
-
-#if 0
-/* CPU related */
-RT_STATUS
-CPUCheckMainCodeOKAndTurnOnCPU(
-	IN	PADAPTER			Adapter
-	);
-
-RT_STATUS
-CPUCheckFirmwareReady(
-	IN	PADAPTER			Adapter
-	);
-
-/* Firmware related */
-VOID
-FWInitializeParameters(
-	IN	PADAPTER		Adapter
-	);
-
-RT_STATUS
-FWSendDownloadCode(
-	IN	PADAPTER		Adapter,
-	IN	pu1Byte			CodeVirtualAddrress,
-	IN	u4Byte			BufferLen
-	);
-
-RT_STATUS
-FWSendNullPacket(
-	IN	PADAPTER		Adapter,
-	IN	u4Byte			Length
-	);
-
-RT_STATUS
-CmdSendPacket(
-	PADAPTER				Adapter,
-	PRT_TCB					pTcb,
-	PRT_TX_LOCAL_BUFFER 	pBuf,
-	u4Byte					BufferLen,
-	u4Byte					PacketType,
-	BOOLEAN					bLastInitPacket
-	);
-#endif
-#endif
-

drivers/staging/rtl8192su/r819xU_phy.h

-#ifndef _R819XU_PHY_H
-#define _R819XU_PHY_H
-
-/* Channel switch:The size of command tables for switch channel*/
-#define MAX_PRECMD_CNT 16
-#define MAX_RFDEPENDCMD_CNT 16
-#define MAX_POSTCMD_CNT 16
-
-typedef enum _SwChnlCmdID{
-	CmdID_End,
-	CmdID_SetTxPowerLevel,
-	CmdID_BBRegWrite10,
-	CmdID_WritePortUlong,
-	CmdID_WritePortUshort,
-	CmdID_WritePortUchar,
-	CmdID_RF_WriteReg,
-}SwChnlCmdID;
-
-/*--------------------------------Define structure--------------------------------*/
-/* 1. Switch channel related */
-typedef struct _SwChnlCmd{
-	SwChnlCmdID	CmdID;
-	u32			Para1;
-	u32			Para2;
-	u32			msDelay;
-}__attribute__ ((packed)) SwChnlCmd;
-
-extern u32 rtl819XMACPHY_Array_PG[];
-extern u32 rtl819XPHY_REG_1T2RArray[];
-extern u32 rtl819XAGCTAB_Array[];
-extern u32 rtl819XRadioA_Array[];
-extern u32 rtl819XRadioB_Array[];
-extern u32 rtl819XRadioC_Array[];
-extern u32 rtl819XRadioD_Array[];
-
-typedef enum _HW90_BLOCK{
-	HW90_BLOCK_MAC = 0,
-	HW90_BLOCK_PHY0 = 1,
-	HW90_BLOCK_PHY1 = 2,
-	HW90_BLOCK_RF = 3,
-	HW90_BLOCK_MAXIMUM = 4, // Never use this
-}HW90_BLOCK_E, *PHW90_BLOCK_E;
-
-typedef enum _RF90_RADIO_PATH{
-	RF90_PATH_A = 0,			//Radio Path A
-	RF90_PATH_B = 1,			//Radio Path B
-	RF90_PATH_C = 2,			//Radio Path C
-	RF90_PATH_D = 3,			//Radio Path D
-	RF90_PATH_MAX				//Max RF number 92 support
-}RF90_RADIO_PATH_E, *PRF90_RADIO_PATH_E;
-
-#define bMaskByte0                0xff
-#define bMaskByte1                0xff00
-#define bMaskByte2                0xff0000
-#define bMaskByte3                0xff000000
-#define bMaskHWord                0xffff0000
-#define bMaskLWord                0x0000ffff
-#define bMaskDWord                0xffffffff
-
-//extern u32 rtl8192_CalculateBitShift(u32 dwBitMask);
-extern u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath);
-extern void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData);
-extern u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask);
-//extern u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset);
-//extern void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
-extern void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data);
-extern u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask);
-extern void rtl8192_phy_configmac(struct net_device* dev);
-extern void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType);
-//extern void rtl8192_InitBBRFRegDef(struct net_device* dev);
-extern u8 rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
-//extern void rtl8192_BB_Config_ParaFile(struct net_device* dev);
-extern void rtl8192_BBConfig(struct net_device* dev);
-extern void rtl8192_phy_getTxPower(struct net_device* dev);
-extern void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel);
-extern void rtl8192_phy_RFConfig(struct net_device* dev);
-extern void rtl8192_phy_updateInitGain(struct net_device* dev);
-extern u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E	eRFPath);
-
-extern u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel);
-extern void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET Offset);
-extern void rtl8192_SwChnl_WorkItem(struct net_device *dev);
-void rtl8192_SetBWModeWorkItem(struct net_device *dev);
-extern bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState);
-//added by amy
-extern void InitialGain819xUsb(struct net_device *dev,	u8 Operation);
-
-extern void InitialGainOperateWorkItemCallBack(struct work_struct *work);
-
-#endif