ARM: s3c64xx: prepare initcalls for multiplatform

In a multiplatform kernel, each initcall is run regardless
of the platform it is meant for, so it must not attempt to
access SoC-specific registers.

This adds 'if (soc_is_s3c64xx)' to all initcalls that are
specific to the s3c64xx platform, to prevent them from breaking
other platforms once we can build them into a combined kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

arch/arm/mach-s3c64xx/common.c

@@ -208,7 +208,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 static __init int s3c64xx_dev_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	subsys_system_register(&s3c64xx_subsys, NULL);
@@ -413,7 +413,7 @@ static int __init s3c64xx_init_irq_eint(void)
 	int irq;
 
 	/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return -ENODEV;
 
 	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {

arch/arm/mach-s3c64xx/cpuidle.c

@@ -18,6 +18,7 @@
 
 #include <asm/cpuidle.h>
 
+#include <plat/cpu.h>
 #include <mach/map.h>
 
 #include "regs-sys.h"
@@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
 
 static int __init s3c64xx_init_cpuidle(void)
 {
+	if (soc_is_s3c64xx())
 		return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+	return 0;
 }
 device_initcall(s3c64xx_init_cpuidle);

arch/arm/mach-s3c64xx/irq-pm.c

@@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
 static __init int s3c64xx_syscore_init(void)
 {
 	/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	register_syscore_ops(&s3c64xx_irq_syscore_ops);

arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -29,6 +29,7 @@
 
 #include <linux/platform_data/spi-s3c64xx.h>
 
+#include <plat/cpu.h>
 #include "crag6410.h"
 
 static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -399,6 +400,9 @@ static struct i2c_driver wlf_gf_module_driver = {
 
 static int __init wlf_gf_module_register(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	return i2c_add_driver(&wlf_gf_module_driver);
 }
 device_initcall(wlf_gf_module_register);

arch/arm/mach-s3c64xx/pl080.c

@@ -14,6 +14,7 @@
 #include <linux/amba/pl08x.h>
 #include <linux/of.h>
 
+#include <plat/cpu.h>
 #include <mach/irqs.h>
 #include <mach/map.h>
 
@@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
 
 static int __init s3c64xx_pl080_init(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	/* Set all DMA configuration to be DMA, not SDMA */
 	writel(0xffffff, S3C64XX_SDMA_SEL);
 

arch/arm/mach-s3c64xx/pm.c

@@ -22,6 +22,7 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
+#include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/wakeup-mask.h>
@@ -332,6 +333,9 @@ int __init s3c64xx_pm_init(void)
 
 static __init int s3c64xx_pm_initcall(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
 

arch/arm/mach-s3c64xx/s3c6400.c

@@ -81,7 +81,7 @@ static struct device s3c6400_dev = {
 static int __init s3c6400_core_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || soc_is_s3c64xx())
 		return 0;
 
 	return subsys_system_register(&s3c6400_subsys, NULL);

arch/arm/mach-s3c64xx/s3c6410.c

@@ -84,7 +84,7 @@ static struct device s3c6410_dev = {
 static int __init s3c6410_core_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	return subsys_system_register(&s3c6410_subsys, NULL);

arch/arm/plat-samsung/gpio-samsung.c

@@ -1176,14 +1176,16 @@ static __init int samsung_gpiolib_init(void)
 	 * interfaces. For legacy (non-DT) platforms this driver is used.
 	 */
 	if (of_have_populated_dt())
-		return -ENODEV;
-
-	samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+		return 0;
 
 	if (soc_is_s3c24xx()) {
+		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+				ARRAY_SIZE(samsung_gpio_cfgs));
 		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
 				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
 	} else if (soc_is_s3c64xx()) {
+		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+				ARRAY_SIZE(samsung_gpio_cfgs));
 		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
 				ARRAY_SIZE(s3c64xx_gpios_2bit),
 				S3C64XX_VA_GPIO + 0xE0, 0x20);
@@ -1192,9 +1194,6 @@ static __init int samsung_gpiolib_init(void)
 				S3C64XX_VA_GPIO);
 		samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
 				ARRAY_SIZE(s3c64xx_gpios_4bit2));
-	} else {
-		WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
-		return -ENODEV;
 	}
 
 	return 0;

arch/arm/plat-samsung/init.c

@@ -152,6 +152,11 @@ static int __init s3c_arch_init(void)
 {
 	int ret;
 
+	/* init is only needed for ATAGS based platforms */
+	if (!IS_ENABLED(CONFIG_ATAGS) ||
+	    (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+		return 0;
+
 	// do the correct init for cpu
 
 	if (cpu == NULL) {