sh: intc - add support for SH7785

This patch converts the cpu specific interrupt setup code for sh7785
from intc2 to intc. New vectors are also added to match the information
provided by the datasheet.

No IRQ/IRL pin vectors are enabled by default. Use plat_irq_setup_pins()
to select between IRL and IRQ mode.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/kernel/cpu/sh4a/setup-sh7785.c

@@ -72,46 +72,235 @@ static int __init sh7785_devices_setup(void)
 }
 __initcall(sh7785_devices_setup);
 
-static struct intc2_data intc2_irq_table[] = {
-	{ 28, 0, 24, 0, 0, 2 },		/* TMU0 */
-
-	{ 40, 8, 24, 0, 2, 3 },		/* SCIF0 ERI */
-	{ 41, 8, 24, 0, 2, 3 },		/* SCIF0 RXI */
-	{ 42, 8, 24, 0, 2, 3 },		/* SCIF0 BRI */
-	{ 43, 8, 24, 0, 2, 3 },		/* SCIF0 TXI */
-
-	{ 44, 8, 16, 0, 3, 3 },		/* SCIF1 ERI */
-	{ 45, 8, 16, 0, 3, 3 },		/* SCIF1 RXI */
-	{ 46, 8, 16, 0, 3, 3 },		/* SCIF1 BRI */
-	{ 47, 8, 16, 0, 3, 3 },		/* SCIF1 TXI */
-
-	{ 64, 0x14,  8, 0, 14, 2 },	/* PCIC0 */
-	{ 65, 0x14,  0, 0, 15, 2 },	/* PCIC1 */
-	{ 66, 0x18, 24, 0, 16, 2 },	/* PCIC2 */
-	{ 67, 0x18, 16, 0, 17, 2 },	/* PCIC3 */
-	{ 68, 0x18,  8, 0, 18, 2 },	/* PCIC4 */
-
-	{ 60,  8,  8, 0, 4, 3 },	/* SCIF2 ERI, RXI, BRI, TXI */
-	{ 60,  8,  0, 0, 5, 3 },	/* SCIF3 ERI, RXI, BRI, TXI */
-	{ 60, 12, 24, 0, 6, 3 },	/* SCIF4 ERI, RXI, BRI, TXI */
-	{ 60, 12, 16, 0, 7, 3 },	/* SCIF5 ERI, RXI, BRI, TXI */
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+	IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	WDT,
+	TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI,
+	DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
+	DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
+	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+	DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
+	DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
+	HSPI,
+	SCIF2, SCIF3, SCIF4, SCIF5,
+	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
+	PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
+	SIOF,
+	MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
+	DU,
+	GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI,
+	TMU3, TMU4, TMU5,
+	SSI0, SSI1,
+	HAC0, HAC1,
+	FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1,
+	GPIOI0, GPIOI1, GPIOI2, GPIOI3,
+
+	/* interrupt groups */
+
+	TMU012, DMAC0, SCIF0, SCIF1, DMAC1,
+	PCIC5, MMCIF, GDTA, TMU345, FLCTL, GPIO
 };
 
-static struct intc2_desc intc2_irq_desc __read_mostly = {
-	.prio_base	= 0xffd40000,
-	.msk_base	= 0xffd40038,
-	.mskclr_base	= 0xffd4003c,
+static struct intc_vect vectors[] = {
+	INTC_VECT(WDT, 0x560),
+	INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
+	INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(DMAC0_DMINT0, 0x620), INTC_VECT(DMAC0_DMINT1, 0x640),
+	INTC_VECT(DMAC0_DMINT2, 0x660), INTC_VECT(DMAC0_DMINT3, 0x680),
+	INTC_VECT(DMAC0_DMINT4, 0x6a0), INTC_VECT(DMAC0_DMINT5, 0x6c0),
+	INTC_VECT(DMAC0_DMAE, 0x6e0),
+	INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
+	INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
+	INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
+	INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
+	INTC_VECT(DMAC1_DMINT6, 0x880), INTC_VECT(DMAC1_DMINT7, 0x8a0),
+	INTC_VECT(DMAC1_DMINT8, 0x8c0), INTC_VECT(DMAC1_DMINT9, 0x8e0),
+	INTC_VECT(DMAC1_DMINT10, 0x900), INTC_VECT(DMAC1_DMINT11, 0x920),
+	INTC_VECT(DMAC1_DMAE, 0x940),
+	INTC_VECT(HSPI, 0x960),
+	INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0),
+	INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0),
+	INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
+	INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
+	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
+	INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
+	INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
+	INTC_VECT(SIOF, 0xc00),
+	INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
+	INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
+	INTC_VECT(DU, 0xd80),
+	INTC_VECT(GDTA_GACLI, 0xda0), INTC_VECT(GDTA_GAMCI, 0xdc0),
+	INTC_VECT(GDTA_GAERI, 0xde0),
+	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+	INTC_VECT(TMU5, 0xe40),
+	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
+	INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0),
+	INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20),
+	INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60),
+	INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0),
+	INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0),
+};
 
-	.intc2_data	= intc2_irq_table,
-	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+static struct intc_group groups[] = {
+	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+	INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
+		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
+	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+	INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
+		   DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE),
+	INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
+	INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
+	INTC_GROUP(GDTA, GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI),
+	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+	INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND,
+		   FLCTL_FLTRQ0, FLCTL_FLTRQ1),
+	INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3),
+};
 
-	.chip = {
-		.name	= "INTC2-sh7785",
-	},
+static struct intc_prio priorities[] = {
+	INTC_PRIO(SCIF0, 3),
+	INTC_PRIO(SCIF1, 3),
+	INTC_PRIO(SCIF2, 3),
+	INTC_PRIO(SCIF3, 3),
+	INTC_PRIO(SCIF4, 3),
+	INTC_PRIO(SCIF5, 3),
+};
+
+static struct intc_mask_reg mask_registers[] = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	    IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	    IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	    IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+	    IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	    IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	    IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	    IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+
+	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO,
+	    FLCTL, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
+	    PCIINTA, PCISERR, HAC1, HAC0, DMAC1, DMAC0, HUDI, WDT,
+	    SCIF5, SCIF4, SCIF3, SCIF2, SCIF1, SCIF0, TMU345, TMU012 } },
+};
+
+static struct intc_prio_reg prio_registers[] = {
+	{ 0xffd00010, 32, 4, /* INTPRI */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					      IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xffd40000, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, TMU2, TMU2_TICPI } },
+	{ 0xffd40004, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, } },
+	{ 0xffd40008, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
+	{ 0xffd4000c, 32, 8, /* INT2PRI3 */ { SCIF4, SCIF5, WDT, } },
+	{ 0xffd40010, 32, 8, /* INT2PRI4 */ { HUDI, DMAC0, DMAC1, } },
+	{ 0xffd40014, 32, 8, /* INT2PRI5 */ { HAC0, HAC1, PCISERR, PCIINTA } },
+	{ 0xffd40018, 32, 8, /* INT2PRI6 */ { PCIINTB, PCIINTC,
+					      PCIINTD, PCIC5 } },
+	{ 0xffd4001c, 32, 8, /* INT2PRI7 */ { SIOF, HSPI, MMCIF, } },
+	{ 0xffd40020, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } },
+	{ 0xffd40024, 32, 8, /* INT2PRI9 */ { DU, GDTA, } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups, priorities,
+			 mask_registers, prio_registers, NULL);
+
+
+/* Support for external interrupt pins in IRQ mode */
+
+static struct intc_vect vectors_irq0123[] = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+};
+
+static struct intc_vect vectors_irq4567[] = {
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+	INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+};
+
+static struct intc_sense_reg sense_registers[] = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123,
+			 NULL, NULL, mask_registers, prio_registers,
+			 sense_registers);
+
+static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567,
+			 NULL, NULL, mask_registers, prio_registers,
+			 sense_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect vectors_irl0123[] = {
+	INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+	INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+	INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+	INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+	INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+	INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+	INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+	INTC_VECT(IRL0_HHHL, 0x3c0),
 };
 
+static struct intc_vect vectors_irl4567[] = {
+	INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
+	INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
+	INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
+	INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
+	INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
+	INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
+	INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
+	INTC_VECT(IRL4_HHHL, 0xcc0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123,
+			 NULL, NULL, mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
+			 NULL, NULL, mask_registers, NULL, NULL);
+
 void __init plat_irq_setup(void)
 {
-	register_intc2_controller(&intc2_irq_desc);
+	register_intc_controller(&intc_desc);
 }
 
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ7654:
+		register_intc_controller(&intc_desc_irq4567);
+		break;
+	case IRQ_MODE_IRQ3210:
+		register_intc_controller(&intc_desc_irq0123);
+		break;
+	case IRQ_MODE_IRL7654:
+		register_intc_controller(&intc_desc_irl4567);
+		break;
+	case IRQ_MODE_IRL3210:
+		register_intc_controller(&intc_desc_irl0123);
+		break;
+	default:
+		BUG();
+	}
+}

arch/sh/mm/Kconfig

@@ -192,7 +192,7 @@ config CPU_SUBTYPE_SH7785
 	bool "Support SH7785 processor"
 	select CPU_SH4A
 	select CPU_SHX2
-	select CPU_HAS_INTC2_IRQ
+	select CPU_HAS_INTC_IRQ
 
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"

include/asm-sh/hw_irq.h

@@ -115,7 +115,8 @@ void __init register_intc_controller(struct intc_desc *desc);
 
 void __init plat_irq_setup(void);
 
-enum { IRQ_MODE_IRQ, IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
+enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
+       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
 void __init plat_irq_setup_pins(int mode);
 
 #endif /* __ASM_SH_HW_IRQ_H */