Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: psmouse - small formatting changes to better follow coding style
  Input: synaptics - set dimensions as reported by firmware
  Input: elantech - relax signature checks
  Input: elantech - enforce common prefix on messages
  Input: wistron_btns - switch to using kmemdup()
  Input: usbtouchscreen - switch to using kmemdup()
  Input: do not force selecting i8042 on Moorestown
  Input: Documentation/sysrq.txt - update KEY_SYSRQ info
  Input: 88pm860x_onkey - remove invalid irq number assignment
  Input: i8042 - add a PNP entry to the aux device list
  Input: i8042 - add some extra PNP keyboard types
  Input: wm9712 - fix wm97xx_set_gpio() logic
  Input: add keypad driver for keys interfaced to TCA6416
  Input: remove obsolete {corgi,spitz,tosa}kbd.c
  Input: kbtab - do not advertise unsupported events
  Input: kbtab - simplify kbtab_disconnect()
  Input: kbtab - fix incorrect size parameter in usb_buffer_free
  Input: acecad - don't advertise mouse events
  Input: acecad - fix some formatting issues
  Input: acecad - simplify usb_acecad_disconnect()
  ...

Trivial conflict in Documentation/feature-removal-schedule.txt

Documentation/sysrq.txt

@@ -177,13 +177,13 @@ virtual console (ALT+Fn) and then back again should also help.
 
 *  I hit SysRq, but nothing seems to happen, what's wrong?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-There are some keyboards that send different scancodes for SysRq than the
-pre-defined 0x54. So if SysRq doesn't work out of the box for a certain
-keyboard, run 'showkey -s' to find out the proper scancode sequence. Then
-use 'setkeycodes <sequence> 84' to define this sequence to the usual SysRq
-code (84 is decimal for 0x54). It's probably best to put this command in a
-boot script. Oh, and by the way, you exit 'showkey' by not typing anything
-for ten seconds.
+There are some keyboards that produce a different keycode for SysRq than the
+pre-defined value of 99 (see KEY_SYSRQ in include/linux/input.h), or which
+don't have a SysRq key at all. In these cases, run 'showkey -s' to find an
+appropriate scancode sequence, and use 'setkeycodes <sequence> 99' to map
+this sequence to the usual SysRq code (e.g., 'setkeycodes e05b 99'). It's
+probably best to put this command in a boot script. Oh, and by the way, you
+exit 'showkey' by not typing anything for ten seconds.
 
 *  I want to add SysRQ key events to a module, how does it work?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

drivers/char/sysrq.c

-/* -*- linux-c -*-
- *
- *	$Id: sysrq.c,v 1.15 1998/08/23 14:56:41 mj Exp $
- *
+/*
  *	Linux Magic System Request Key Hacks
  *
  *	(c) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
@@ -10,8 +7,13 @@
  *	(c) 2000 Crutcher Dunnavant <crutcher+kernel@datastacks.com>
  *	overhauled to use key registration
  *	based upon discusions in irc://irc.openprojects.net/#kernelnewbies
+ *
+ *	Copyright (c) 2010 Dmitry Torokhov
+ *	Input handler conversion
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
@@ -39,33 +41,34 @@
 #include <linux/hrtimer.h>
 #include <linux/oom.h>
 #include <linux/slab.h>
+#include <linux/input.h>
 
 #include <asm/ptrace.h>
 #include <asm/irq_regs.h>
 
 /* Whether we react on sysrq keys or just ignore them */
-int __read_mostly __sysrq_enabled = 1;
-
-static int __read_mostly sysrq_always_enabled;
+static int __read_mostly sysrq_enabled = 1;
+static bool __read_mostly sysrq_always_enabled;
 
-int sysrq_on(void)
+static bool sysrq_on(void)
 {
-	return __sysrq_enabled || sysrq_always_enabled;
+	return sysrq_enabled || sysrq_always_enabled;
 }
 
 /*
  * A value of 1 means 'all', other nonzero values are an op mask:
  */
-static inline int sysrq_on_mask(int mask)
+static bool sysrq_on_mask(int mask)
 {
-	return sysrq_always_enabled || __sysrq_enabled == 1 ||
-						(__sysrq_enabled & mask);
+	return sysrq_always_enabled ||
+	       sysrq_enabled == 1 ||
+	       (sysrq_enabled & mask);
 }
 
 static int __init sysrq_always_enabled_setup(char *str)
 {
-	sysrq_always_enabled = 1;
-	printk(KERN_INFO "debug: sysrq always enabled.\n");
+	sysrq_always_enabled = true;
+	pr_info("sysrq always enabled.\n");
 
 	return 1;
 }
@@ -76,6 +79,7 @@ __setup("sysrq_always_enabled", sysrq_always_enabled_setup);
 static void sysrq_handle_loglevel(int key, struct tty_struct *tty)
 {
 	int i;
+
 	i = key - '0';
 	console_loglevel = 7;
 	printk("Loglevel set to %d\n", i);
@@ -101,7 +105,7 @@ static struct sysrq_key_op sysrq_SAK_op = {
 	.enable_mask	= SYSRQ_ENABLE_KEYBOARD,
 };
 #else
-#define sysrq_SAK_op (*(struct sysrq_key_op *)0)
+#define sysrq_SAK_op (*(struct sysrq_key_op *)NULL)
 #endif
 
 #ifdef CONFIG_VT
@@ -119,7 +123,7 @@ static struct sysrq_key_op sysrq_unraw_op = {
 	.enable_mask	= SYSRQ_ENABLE_KEYBOARD,
 };
 #else
-#define sysrq_unraw_op (*(struct sysrq_key_op *)0)
+#define sysrq_unraw_op (*(struct sysrq_key_op *)NULL)
 #endif /* CONFIG_VT */
 
 static void sysrq_handle_crash(int key, struct tty_struct *tty)
@@ -195,7 +199,7 @@ static struct sysrq_key_op sysrq_showlocks_op = {
 	.action_msg	= "Show Locks Held",
 };
 #else
-#define sysrq_showlocks_op (*(struct sysrq_key_op *)0)
+#define sysrq_showlocks_op (*(struct sysrq_key_op *)NULL)
 #endif
 
 #ifdef CONFIG_SMP
@@ -298,7 +302,7 @@ static struct sysrq_key_op sysrq_ftrace_dump_op = {
 	.enable_mask	= SYSRQ_ENABLE_DUMP,
 };
 #else
-#define sysrq_ftrace_dump_op (*(struct sysrq_key_op *)0)
+#define sysrq_ftrace_dump_op (*(struct sysrq_key_op *)NULL)
 #endif
 
 static void sysrq_handle_showmem(int key, struct tty_struct *tty)
@@ -477,6 +481,7 @@ struct sysrq_key_op *__sysrq_get_key_op(int key)
 	i = sysrq_key_table_key2index(key);
 	if (i != -1)
 	        op_p = sysrq_key_table[i];
+
         return op_p;
 }
 
@@ -488,11 +493,7 @@ static void __sysrq_put_key_op(int key, struct sysrq_key_op *op_p)
                 sysrq_key_table[i] = op_p;
 }
 
-/*
- * This is the non-locking version of handle_sysrq.  It must/can only be called
- * by sysrq key handlers, as they are inside of the lock
- */
-void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
+static void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
 {
 	struct sysrq_key_op *op_p;
 	int orig_log_level;
@@ -544,10 +545,6 @@ void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
 	spin_unlock_irqrestore(&sysrq_key_table_lock, flags);
 }
 
-/*
- * This function is called by the keyboard handler when SysRq is pressed
- * and any other keycode arrives.
- */
 void handle_sysrq(int key, struct tty_struct *tty)
 {
 	if (sysrq_on())
@@ -555,10 +552,177 @@ void handle_sysrq(int key, struct tty_struct *tty)
 }
 EXPORT_SYMBOL(handle_sysrq);
 
+#ifdef CONFIG_INPUT
+
+/* Simple translation table for the SysRq keys */
+static const unsigned char sysrq_xlate[KEY_MAX + 1] =
+        "\000\0331234567890-=\177\t"                    /* 0x00 - 0x0f */
+        "qwertyuiop[]\r\000as"                          /* 0x10 - 0x1f */
+        "dfghjkl;'`\000\\zxcv"                          /* 0x20 - 0x2f */
+        "bnm,./\000*\000 \000\201\202\203\204\205"      /* 0x30 - 0x3f */
+        "\206\207\210\211\212\000\000789-456+1"         /* 0x40 - 0x4f */
+        "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
+        "\r\000/";                                      /* 0x60 - 0x6f */
+
+static bool sysrq_down;
+static int sysrq_alt_use;
+static int sysrq_alt;
+
+static bool sysrq_filter(struct input_handle *handle, unsigned int type,
+		         unsigned int code, int value)
+{
+	if (type != EV_KEY)
+		goto out;
+
+	switch (code) {
+
+	case KEY_LEFTALT:
+	case KEY_RIGHTALT:
+		if (value)
+			sysrq_alt = code;
+		else if (sysrq_down && code == sysrq_alt_use)
+			sysrq_down = false;
+		break;
+
+	case KEY_SYSRQ:
+		if (value == 1 && sysrq_alt) {
+			sysrq_down = true;
+			sysrq_alt_use = sysrq_alt;
+		}
+		break;
+
+	default:
+		if (sysrq_down && value && value != 2)
+			__handle_sysrq(sysrq_xlate[code], NULL, 1);
+		break;
+	}
+
+out:
+	return sysrq_down;
+}
+
+static int sysrq_connect(struct input_handler *handler,
+			 struct input_dev *dev,
+			 const struct input_device_id *id)
+{
+	struct input_handle *handle;
+	int error;
+
+	sysrq_down = false;
+	sysrq_alt = 0;
+
+	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
+	if (!handle)
+		return -ENOMEM;
+
+	handle->dev = dev;
+	handle->handler = handler;
+	handle->name = "sysrq";
+
+	error = input_register_handle(handle);
+	if (error) {
+		pr_err("Failed to register input sysrq handler, error %d\n",
+			error);
+		goto err_free;
+	}
+
+	error = input_open_device(handle);
+	if (error) {
+		pr_err("Failed to open input device, error %d\n", error);
+		goto err_unregister;
+	}
+
+	return 0;
+
+ err_unregister:
+	input_unregister_handle(handle);
+ err_free:
+	kfree(handle);
+	return error;
+}
+
+static void sysrq_disconnect(struct input_handle *handle)
+{
+	input_close_device(handle);
+	input_unregister_handle(handle);
+	kfree(handle);
+}
+
+/*
+ * We are matching on KEY_LEFTALT insteard of KEY_SYSRQ because not all
+ * keyboards have SysRq ikey predefined and so user may add it to keymap
+ * later, but we expect all such keyboards to have left alt.
+ */
+static const struct input_device_id sysrq_ids[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { BIT_MASK(KEY_LEFTALT) },
+	},
+	{ },
+};
+
+static struct input_handler sysrq_handler = {
+	.filter		= sysrq_filter,
+	.connect	= sysrq_connect,
+	.disconnect	= sysrq_disconnect,
+	.name		= "sysrq",
+	.id_table	= sysrq_ids,
+};
+
+static bool sysrq_handler_registered;
+
+static inline void sysrq_register_handler(void)
+{
+	int error;
+
+	error = input_register_handler(&sysrq_handler);
+	if (error)
+		pr_err("Failed to register input handler, error %d", error);
+	else
+		sysrq_handler_registered = true;
+}
+
+static inline void sysrq_unregister_handler(void)
+{
+	if (sysrq_handler_registered) {
+		input_unregister_handler(&sysrq_handler);
+		sysrq_handler_registered = false;
+	}
+}
+
+#else
+
+static inline void sysrq_register_handler(void)
+{
+}
+
+static inline void sysrq_unregister_handler(void)
+{
+}
+
+#endif /* CONFIG_INPUT */
+
+int sysrq_toggle_support(int enable_mask)
+{
+	bool was_enabled = sysrq_on();
+
+	sysrq_enabled = enable_mask;
+
+	if (was_enabled != sysrq_on()) {
+		if (sysrq_on())
+			sysrq_register_handler();
+		else
+			sysrq_unregister_handler();
+	}
+
+	return 0;
+}
+
 static int __sysrq_swap_key_ops(int key, struct sysrq_key_op *insert_op_p,
                                 struct sysrq_key_op *remove_op_p)
 {
-
 	int retval;
 	unsigned long flags;
 
@@ -599,6 +763,7 @@ static ssize_t write_sysrq_trigger(struct file *file, const char __user *buf,
 			return -EFAULT;
 		__handle_sysrq(c, NULL, 0);
 	}
+
 	return count;
 }
 
@@ -606,10 +771,28 @@ static const struct file_operations proc_sysrq_trigger_operations = {
 	.write		= write_sysrq_trigger,
 };
 
+static void sysrq_init_procfs(void)
+{
+	if (!proc_create("sysrq-trigger", S_IWUSR, NULL,
+			 &proc_sysrq_trigger_operations))
+		pr_err("Failed to register proc interface\n");
+}
+
+#else
+
+static inline void sysrq_init_procfs(void)
+{
+}
+
+#endif /* CONFIG_PROC_FS */
+
 static int __init sysrq_init(void)
 {
-	proc_create("sysrq-trigger", S_IWUSR, NULL, &proc_sysrq_trigger_operations);
+	sysrq_init_procfs();
+
+	if (sysrq_on())
+		sysrq_register_handler();
+
 	return 0;
 }
 module_init(sysrq_init);
-#endif

drivers/input/keyboard/Kconfig

@@ -73,7 +73,7 @@ config KEYBOARD_ATKBD
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86
+	select SERIO_I8042 if X86 && !X86_MRST
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
@@ -179,6 +179,22 @@ config KEYBOARD_GPIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio_keys.
 
+config KEYBOARD_TCA6416
+	tristate "TCA6416 Keypad Support"
+	depends on I2C
+	help
+	  This driver implements basic keypad functionality
+	  for keys connected through TCA6416 IO expander
+
+	  Say Y here if your device has keys connected to
+	  TCA6416 IO expander. Your board-specific setup logic
+	  must also provide pin-mask details(of which TCA6416 pins
+	  are used for keypad).
+
+	  If enabled the complete TCA6416 device will be managed through
+	  this driver.
+
+
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
 	depends on GENERIC_GPIO

drivers/input/keyboard/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
+obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o

drivers/input/keyboard/lm8323.c

@@ -670,8 +670,6 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 		goto fail1;
 	}
 
-	i2c_set_clientdata(client, lm);
-
 	lm->client = client;
 	lm->idev = idev;
 	mutex_init(&lm->lock);
@@ -753,6 +751,8 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 		goto fail4;
 	}
 
+	i2c_set_clientdata(client, lm);
+
 	device_init_wakeup(&client->dev, 1);
 	enable_irq_wake(client->irq);
 
@@ -778,6 +778,8 @@ static int __devexit lm8323_remove(struct i2c_client *client)
 	struct lm8323_chip *lm = i2c_get_clientdata(client);
 	int i;
 
+	i2c_set_clientdata(client, NULL);
+
 	disable_irq_wake(client->irq);
 	free_irq(client->irq, lm);
 	cancel_work_sync(&lm->work);

drivers/input/keyboard/tca6416-keypad.c

+/*
+ * Driver for keys on TCA6416 I2C IO expander
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author : Sriramakrishnan.A.G. <srk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/tca6416_keypad.h>
+
+#define TCA6416_INPUT          0
+#define TCA6416_OUTPUT         1
+#define TCA6416_INVERT         2
+#define TCA6416_DIRECTION      3
+
+static const struct i2c_device_id tca6416_id[] = {
+	{ "tca6416-keys", 16, },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tca6416_id);
+
+struct tca6416_drv_data {
+	struct input_dev *input;
+	struct tca6416_button data[0];
+};
+
+struct tca6416_keypad_chip {
+	uint16_t reg_output;
+	uint16_t reg_direction;
+	uint16_t reg_input;
+
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct delayed_work dwork;
+	u16 pinmask;
+	int irqnum;
+	bool use_polling;
+	struct tca6416_button buttons[0];
+};
+
+static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val)
+{
+	int error;
+
+	error = i2c_smbus_write_word_data(chip->client, reg << 1, val);
+	if (error < 0) {
+		dev_err(&chip->client->dev,
+			"%s failed, reg: %d, val: %d, error: %d\n",
+			__func__, reg, val, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
+{
+	int retval;
+
+	retval = i2c_smbus_read_word_data(chip->client, reg << 1);
+	if (retval < 0) {
+		dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n",
+			__func__, reg, retval);
+		return retval;
+	}
+
+	*val = (u16)retval;
+	return 0;
+}
+
+static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
+{
+	struct input_dev *input = chip->input;
+	u16 reg_val, val;
+	int error, i, pin_index;
+
+	error = tca6416_read_reg(chip, TCA6416_INPUT, &reg_val);
+	if (error)
+		return;
+
+	reg_val &= chip->pinmask;
+
+	/* Figure out which lines have changed */
+	val = reg_val ^ chip->reg_input;
+	chip->reg_input = reg_val;
+
+	for (i = 0, pin_index = 0; i < 16; i++) {
+		if (val & (1 << i)) {
+			struct tca6416_button *button = &chip->buttons[pin_index];
+			unsigned int type = button->type ?: EV_KEY;
+			int state = ((reg_val & (1 << i)) ? 1 : 0)
+						^ button->active_low;
+
+			input_event(input, type, button->code, !!state);
+			input_sync(input);
+		}
+
+		if (chip->pinmask & (1 << i))
+			pin_index++;
+	}
+}
+
+/*
+ * This is threaded IRQ handler and this can (and will) sleep.
+ */
+static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
+{
+	struct tca6416_keypad_chip *chip = dev_id;
+
+	tca6416_keys_scan(chip);
+
+	return IRQ_HANDLED;
+}
+
+static void tca6416_keys_work_func(struct work_struct *work)
+{
+	struct tca6416_keypad_chip *chip =
+		container_of(work, struct tca6416_keypad_chip, dwork.work);
+
+	tca6416_keys_scan(chip);
+	schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
+}
+
+static int tca6416_keys_open(struct input_dev *dev)
+{
+	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
+
+	/* Get initial device state in case it has switches */
+	tca6416_keys_scan(chip);
+
+	if (chip->use_polling)
+		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
+	else
+		enable_irq(chip->irqnum);
+
+	return 0;
+}
+
+static void tca6416_keys_close(struct input_dev *dev)
+{
+	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
+
+	if (chip->use_polling)
+		cancel_delayed_work_sync(&chip->dwork);
+	else
+		disable_irq(chip->irqnum);
+}
+
+static int __devinit tca6416_setup_registers(struct tca6416_keypad_chip *chip)
+{
+	int error;
+
+	error = tca6416_read_reg(chip, TCA6416_OUTPUT, &chip->reg_output);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
+	if (error)
+		return error;
+
+	/* ensure that keypad pins are set to input */
+	error = tca6416_write_reg(chip, TCA6416_DIRECTION,
+				  chip->reg_direction | chip->pinmask);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_INPUT, &chip->reg_input);
+	if (error)
+		return error;
+
+	chip->reg_input &= chip->pinmask;
+
+	return 0;
+}
+
+static int __devinit tca6416_keypad_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct tca6416_keys_platform_data *pdata;
+	struct tca6416_keypad_chip *chip;
+	struct input_dev *input;
+	int error;
+	int i;
+
+	/* Check functionality */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
+		dev_err(&client->dev, "%s adapter not supported\n",
+			dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	chip = kzalloc(sizeof(struct tca6416_keypad_chip) +
+		       pdata->nbuttons * sizeof(struct tca6416_button),
+		       GFP_KERNEL);
+	input = input_allocate_device();
+	if (!chip || !input) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	chip->client = client;
+	chip->input = input;
+	chip->pinmask = pdata->pinmask;
+	chip->use_polling = pdata->use_polling;
+
+	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
+
+	input->phys = "tca6416-keys/input0";
+	input->name = client->name;
+	input->dev.parent = &client->dev;
+
+	input->open = tca6416_keys_open;
+	input->close = tca6416_keys_close;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		unsigned int type;
+
+		chip->buttons[i] = pdata->buttons[i];
+		type = (pdata->buttons[i].type) ?: EV_KEY;
+		input_set_capability(input, type, pdata->buttons[i].code);
+	}
+
+	input_set_drvdata(input, chip);
+
+	/*
+	 * Initialize cached registers from their original values.
+	 * we can't share this chip with another i2c master.
+	 */
+	error = tca6416_setup_registers(chip);
+	if (error)
+		goto fail1;
+
+	if (!chip->use_polling) {
+		if (pdata->irq_is_gpio)
+			chip->irqnum = gpio_to_irq(client->irq);
+		else
+			chip->irqnum = client->irq;
+
+		error = request_threaded_irq(chip->irqnum, NULL,
+					     tca6416_keys_isr,
+					     IRQF_TRIGGER_FALLING,
+					     "tca6416-keypad", chip);
+		if (error) {
+			dev_dbg(&client->dev,
+				"Unable to claim irq %d; error %d\n",
+				chip->irqnum, error);
+			goto fail1;
+		}
+		disable_irq(chip->irqnum);
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_dbg(&client->dev,
+			"Unable to register input device, error: %d\n", error);
+		goto fail2;
+	}
+
+	i2c_set_clientdata(client, chip);
+
+	return 0;
+
+fail2:
+	if (!chip->use_polling) {
+		free_irq(chip->irqnum, chip);
+		enable_irq(chip->irqnum);
+	}
+fail1:
+	input_free_device(input);
+	kfree(chip);
+	return error;
+}
+
+static int __devexit tca6416_keypad_remove(struct i2c_client *client)
+{
+	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
+
+	if (!chip->use_polling) {
+		free_irq(chip->irqnum, chip);
+		enable_irq(chip->irqnum);
+	}
+
+	input_unregister_device(chip->input);
+	kfree(chip);
+
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+
+static struct i2c_driver tca6416_keypad_driver = {
+	.driver = {
+		.name	= "tca6416-keypad",
+	},
+	.probe		= tca6416_keypad_probe,
+	.remove		= __devexit_p(tca6416_keypad_remove),
+	.id_table	= tca6416_id,
+};
+
+static int __init tca6416_keypad_init(void)
+{
+	return i2c_add_driver(&tca6416_keypad_driver);
+}
+
+subsys_initcall(tca6416_keypad_init);
+
+static void __exit tca6416_keypad_exit(void)
+{
+	i2c_del_driver(&tca6416_keypad_driver);
+}
+module_exit(tca6416_keypad_exit);
+
+MODULE_AUTHOR("Sriramakrishnan <srk@ti.com>");
+MODULE_DESCRIPTION("Keypad driver over tca6146 IO expander");
+MODULE_LICENSE("GPL");

drivers/input/misc/88pm860x_onkey.c

@@ -87,7 +87,6 @@ static int __devinit pm860x_onkey_probe(struct platform_device *pdev)
 	info->idev->phys = "88pm860x_on/input0";
 	info->idev->id.bustype = BUS_I2C;
 	info->idev->dev.parent = &pdev->dev;
-	info->irq = irq;
 	info->idev->evbit[0] = BIT_MASK(EV_KEY);
 	info->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
 

drivers/input/misc/Kconfig

@@ -22,6 +22,36 @@ config INPUT_88PM860X_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called 88pm860x_onkey.
 
+config INPUT_AD714X
+	tristate "Analog Devices AD714x Capacitance Touch Sensor"
+	help
+	  Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
+
+	  You should select a bus connection too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x.
+
+config INPUT_AD714X_I2C
+	tristate "support I2C bus connection"
+	depends on INPUT_AD714X && I2C
+	default y
+	help
+	  Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x-i2c.
+
+config INPUT_AD714X_SPI
+	tristate "support SPI bus connection"
+	depends on INPUT_AD714X && SPI
+	default y
+	help
+	  Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x-spi.
+
 config INPUT_PCSPKR
 	tristate "PC Speaker support"
 	depends on PCSPKR_PLATFORM
@@ -277,6 +307,16 @@ config INPUT_PCF50633_PMU
 	 Say Y to include support for delivering  PMU events via  input
 	 layer on NXP PCF50633.
 
+config INPUT_PCF8574
+	tristate "PCF8574 Keypad input device"
+	depends on I2C && EXPERIMENTAL
+	help
+	  Say Y here if you want to support a keypad connetced via I2C
+	  with a PCF8574.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcf8574_keypad.
+
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
 	depends on GPIOLIB && GENERIC_GPIO

drivers/input/misc/Makefile

@@ -5,6 +5,9 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
+obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
+obj-$(CONFIG_INPUT_AD714X_I2C)		+= ad714x-i2c.o
+obj-$(CONFIG_INPUT_AD714X_SPI)		+= ad714x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
@@ -19,6 +22,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
+obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o

drivers/input/misc/ad714x-i2c.c

+/*
+ * AD714X CapTouch Programmable Controller driver (I2C bus)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include "ad714x.h"
+
+#ifdef CONFIG_PM
+static int ad714x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+	return ad714x_disable(i2c_get_clientdata(client));
+}
+
+static int ad714x_i2c_resume(struct i2c_client *client)
+{
+	return ad714x_enable(i2c_get_clientdata(client));
+}
+#else
+# define ad714x_i2c_suspend NULL
+# define ad714x_i2c_resume  NULL
+#endif
+
+static int ad714x_i2c_write(struct device *dev, unsigned short reg,
+				unsigned short data)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = 0;
+	u8 *_reg = (u8 *)&reg;
+	u8 *_data = (u8 *)&data;
+
+	u8 tx[4] = {
+		_reg[1],
+		_reg[0],
+		_data[1],
+		_data[0]
+	};
+
+	ret = i2c_master_send(client, tx, 4);
+	if (ret < 0)
+		dev_err(&client->dev, "I2C write error\n");
+
+	return ret;
+}
+
+static int ad714x_i2c_read(struct device *dev, unsigned short reg,
+				unsigned short *data)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = 0;
+	u8 *_reg = (u8 *)&reg;
+	u8 *_data = (u8 *)data;
+
+	u8 tx[2] = {
+		_reg[1],
+		_reg[0]
+	};
+	u8 rx[2];
+
+	ret = i2c_master_send(client, tx, 2);
+	if (ret >= 0)
+		ret = i2c_master_recv(client, rx, 2);
+
+	if (unlikely(ret < 0)) {
+		dev_err(&client->dev, "I2C read error\n");
+	} else {
+		_data[0] = rx[1];
+		_data[1] = rx[0];
+	}
+
+	return ret;
+}
+
+static int __devinit ad714x_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct ad714x_chip *chip;
+
+	chip = ad714x_probe(&client->dev, BUS_I2C, client->irq,
+			    ad714x_i2c_read, ad714x_i2c_write);
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+
+	i2c_set_clientdata(client, chip);
+
+	return 0;
+}
+
+static int __devexit ad714x_i2c_remove(struct i2c_client *client)
+{
+	struct ad714x_chip *chip = i2c_get_clientdata(client);
+
+	ad714x_remove(chip);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+static const struct i2c_device_id ad714x_id[] = {
+	{ "ad7142_captouch", 0 },
+	{ "ad7143_captouch", 0 },
+	{ "ad7147_captouch", 0 },
+	{ "ad7147a_captouch", 0 },
+	{ "ad7148_captouch", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ad714x_id);
+
+static struct i2c_driver ad714x_i2c_driver = {
+	.driver = {
+		.name = "ad714x_captouch",
+	},
+	.probe    = ad714x_i2c_probe,
+	.remove   = __devexit_p(ad714x_i2c_remove),
+	.suspend  = ad714x_i2c_suspend,
+	.resume	  = ad714x_i2c_resume,
+	.id_table = ad714x_id,
+};
+
+static __init int ad714x_i2c_init(void)
+{
+	return i2c_add_driver(&ad714x_i2c_driver);
+}
+module_init(ad714x_i2c_init);
+
+static __exit void ad714x_i2c_exit(void)
+{
+	i2c_del_driver(&ad714x_i2c_driver);
+}
+module_exit(ad714x_i2c_exit);
+
+MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL");

drivers/input/misc/ad714x-spi.c

+/*
+ * AD714X CapTouch Programmable Controller driver (SPI bus)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include "ad714x.h"
+
+#define AD714x_SPI_CMD_PREFIX      0xE000   /* bits 15:11 */
+#define AD714x_SPI_READ            BIT(10)
+
+#ifdef CONFIG_PM
+static int ad714x_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+	return ad714x_disable(spi_get_drvdata(spi));
+}
+
+static int ad714x_spi_resume(struct spi_device *spi)
+{
+	return ad714x_enable(spi_get_drvdata(spi));
+}
+#else
+# define ad714x_spi_suspend NULL
+# define ad714x_spi_resume  NULL
+#endif
+
+static int ad714x_spi_read(struct device *dev, unsigned short reg,
+		unsigned short *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned short tx = AD714x_SPI_CMD_PREFIX | AD714x_SPI_READ | reg;
+
+	return spi_write_then_read(spi, (u8 *)&tx, 2, (u8 *)data, 2);
+}
+
+static int ad714x_spi_write(struct device *dev, unsigned short reg,
+		unsigned short data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned short tx[2] = {
+		AD714x_SPI_CMD_PREFIX | reg,
+		data
+	};
+
+	return spi_write(spi, (u8 *)tx, 4);
+}
+
+static int __devinit ad714x_spi_probe(struct spi_device *spi)
+{
+	struct ad714x_chip *chip;
+
+	chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq,
+			    ad714x_spi_read, ad714x_spi_write);
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+
+	spi_set_drvdata(spi, chip);
+
+	return 0;
+}
+
+static int __devexit ad714x_spi_remove(struct spi_device *spi)
+{
+	struct ad714x_chip *chip = spi_get_drvdata(spi);
+
+	ad714x_remove(chip);
+	spi_set_drvdata(spi, NULL);
+
+	return 0;
+}
+
+static struct spi_driver ad714x_spi_driver = {
+	.driver = {
+		.name	= "ad714x_captouch",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad714x_spi_probe,
+	.remove		= __devexit_p(ad714x_spi_remove),
+	.suspend	= ad714x_spi_suspend,
+	.resume		= ad714x_spi_resume,
+};
+
+static __init int ad714x_spi_init(void)
+{
+	return spi_register_driver(&ad714x_spi_driver);
+}
+module_init(ad714x_spi_init);
+
+static __exit void ad714x_spi_exit(void)
+{
+	spi_unregister_driver(&ad714x_spi_driver);
+}
+module_exit(ad714x_spi_exit);
+
+MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL");

drivers/input/misc/ad714x.h

+/*
+ * AD714X CapTouch Programmable Controller driver (bus interfaces)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _AD714X_H_
+#define _AD714X_H_
+
+#include <linux/types.h>
+
+struct device;
+struct ad714x_chip;
+
+typedef int (*ad714x_read_t)(struct device *, unsigned short, unsigned short *);
+typedef int (*ad714x_write_t)(struct device *, unsigned short, unsigned short);
+
+int ad714x_disable(struct ad714x_chip *ad714x);
+int ad714x_enable(struct ad714x_chip *ad714x);
+struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
+				 ad714x_read_t read, ad714x_write_t write);
+void ad714x_remove(struct ad714x_chip *ad714x);
+
+#endif

drivers/input/misc/pcf8574_keypad.c

+/*
+ * Driver for a keypad w/16 buttons connected to a PCF8574 I2C I/O expander
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define DRV_NAME "pcf8574_keypad"
+
+static const unsigned char pcf8574_kp_btncode[] = {
+	[0] = KEY_RESERVED,
+	[1] = KEY_ENTER,
+	[2] = KEY_BACKSLASH,
+	[3] = KEY_0,
+	[4] = KEY_RIGHTBRACE,
+	[5] = KEY_C,
+	[6] = KEY_9,
+	[7] = KEY_8,
+	[8] = KEY_7,
+	[9] = KEY_B,
+	[10] = KEY_6,
+	[11] = KEY_5,
+	[12] = KEY_4,
+	[13] = KEY_A,
+	[14] = KEY_3,
+	[15] = KEY_2,
+	[16] = KEY_1
+};
+
+struct kp_data {
+	unsigned short btncode[ARRAY_SIZE(pcf8574_kp_btncode)];
+	struct input_dev *idev;
+	struct i2c_client *client;
+	char name[64];
+	char phys[32];
+	unsigned char laststate;
+};
+
+static short read_state(struct kp_data *lp)
+{
+	unsigned char x, y, a, b;
+
+	i2c_smbus_write_byte(lp->client, 240);
+	x = 0xF & (~(i2c_smbus_read_byte(lp->client) >> 4));
+
+	i2c_smbus_write_byte(lp->client, 15);
+	y = 0xF & (~i2c_smbus_read_byte(lp->client));
+
+	for (a = 0; x > 0; a++)
+		x = x >> 1;
+	for (b = 0; y > 0; b++)
+		y = y >> 1;
+
+	return ((a - 1) * 4) + b;
+}
+
+static irqreturn_t pcf8574_kp_irq_handler(int irq, void *dev_id)
+{
+	struct kp_data *lp = dev_id;
+	unsigned char nextstate = read_state(lp);
+
+	if (lp->laststate != nextstate) {
+		int key_down = nextstate <= ARRAY_SIZE(lp->btncode);
+		unsigned short keycode = key_down ?
+			lp->btncode[nextstate] : lp->btncode[lp->laststate];
+
+		input_report_key(lp->idev, keycode, key_down);
+		input_sync(lp->idev);
+
+		lp->laststate = nextstate;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit pcf8574_kp_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int i, ret;
+	struct input_dev *idev;
+	struct kp_data *lp;
+
+	if (i2c_smbus_write_byte(client, 240) < 0) {
+		dev_err(&client->dev, "probe: write fail\n");
+		return -ENODEV;
+	}
+
+	lp = kzalloc(sizeof(*lp), GFP_KERNEL);
+	if (!lp)
+		return -ENOMEM;
+
+	idev = input_allocate_device();
+	if (!idev) {
+		dev_err(&client->dev, "Can't allocate input device\n");
+		ret = -ENOMEM;
+		goto fail_allocate;
+	}
+
+	lp->idev = idev;
+	lp->client = client;
+
+	idev->evbit[0] = BIT_MASK(EV_KEY);
+	idev->keycode = lp->btncode;
+	idev->keycodesize = sizeof(lp->btncode[0]);
+	idev->keycodemax = ARRAY_SIZE(lp->btncode);
+
+	for (i = 0; i < ARRAY_SIZE(pcf8574_kp_btncode); i++) {
+		lp->btncode[i] = pcf8574_kp_btncode[i];
+		__set_bit(lp->btncode[i] & KEY_MAX, idev->keybit);
+	}
+
+	sprintf(lp->name, DRV_NAME);
+	sprintf(lp->phys, "kp_data/input0");
+
+	idev->name = lp->name;
+	idev->phys = lp->phys;
+	idev->id.bustype = BUS_I2C;
+	idev->id.vendor = 0x0001;
+	idev->id.product = 0x0001;
+	idev->id.version = 0x0100;
+
+	input_set_drvdata(idev, lp);
+
+	ret = input_register_device(idev);
+	if (ret) {
+		dev_err(&client->dev, "input_register_device() failed\n");
+		goto fail_register;
+	}
+
+	lp->laststate = read_state(lp);
+
+	ret = request_threaded_irq(client->irq, NULL, pcf8574_kp_irq_handler,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   DRV_NAME, lp);
+	if (ret) {
+		dev_err(&client->dev, "IRQ %d is not free\n", client->irq);
+		goto fail_irq;
+	}
+
+	i2c_set_clientdata(client, lp);
+	return 0;
+
+ fail_irq:
+	input_unregister_device(idev);
+ fail_register:
+	input_set_drvdata(idev, NULL);
+	input_free_device(idev);
+ fail_allocate:
+	kfree(lp);
+
+	return ret;
+}
+
+static int __devexit pcf8574_kp_remove(struct i2c_client *client)
+{
+	struct kp_data *lp = i2c_get_clientdata(client);
+
+	free_irq(client->irq, lp);
+
+	input_unregister_device(lp->idev);
+	kfree(lp);
+
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcf8574_kp_resume(struct i2c_client *client)
+{
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static int pcf8574_kp_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	disable_irq(client->irq);
+
+	return 0;
+}
+#else
+# define pcf8574_kp_resume  NULL
+# define pcf8574_kp_suspend NULL
+#endif
+
+static const struct i2c_device_id pcf8574_kp_id[] = {
+	{ DRV_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8574_kp_id);
+
+static struct i2c_driver pcf8574_kp_driver = {
+	.driver = {
+		.name  = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe    = pcf8574_kp_probe,
+	.remove   = __devexit_p(pcf8574_kp_remove),
+	.suspend  = pcf8574_kp_suspend,
+	.resume   = pcf8574_kp_resume,
+	.id_table = pcf8574_kp_id,
+};
+
+static int __init pcf8574_kp_init(void)
+{
+	return i2c_add_driver(&pcf8574_kp_driver);
+}
+module_init(pcf8574_kp_init);
+
+static void __exit pcf8574_kp_exit(void)
+{
+	i2c_del_driver(&pcf8574_kp_driver);
+}
+module_exit(pcf8574_kp_exit);
+
+MODULE_AUTHOR("Michael Hennerich");
+MODULE_DESCRIPTION("Keypad input driver for 16 keys connected to PCF8574");
+MODULE_LICENSE("GPL");

drivers/input/misc/wistron_btns.c

@@ -983,11 +983,11 @@ static int __init copy_keymap(void)
 	for (key = keymap; key->type != KE_END; key++)
 		length++;
 
-	new_keymap = kmalloc(length * sizeof(struct key_entry), GFP_KERNEL);
+	new_keymap = kmemdup(keymap, length * sizeof(struct key_entry),
+			     GFP_KERNEL);
 	if (!new_keymap)
 		return -ENOMEM;
 
-	memcpy(new_keymap, keymap, length * sizeof(struct key_entry));
 	keymap = new_keymap;
 
 	return 0;

drivers/input/mouse/Kconfig

@@ -17,7 +17,7 @@ config MOUSE_PS2
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86
+	select SERIO_I8042 if X86 && !X86_MRST
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you have a PS/2 mouse connected to your system. This

drivers/input/mouse/elantech.c

@@ -10,6 +10,8 @@
  * Trademarks are the property of their respective owners.
  */
 
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -19,10 +21,10 @@
 #include "psmouse.h"
 #include "elantech.h"
 
-#define elantech_debug(format, arg...)				\
+#define elantech_debug(fmt, ...)					\
 	do {								\
 		if (etd->debug)						\
-			printk(KERN_DEBUG format, ##arg);	\
+			printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__);	\
 	} while (0)
 
 static bool force_elantech;
@@ -37,7 +39,7 @@ static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c,
 {
 	if (psmouse_sliced_command(psmouse, c) ||
 	    ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
-		pr_err("elantech.c: synaptics_send_cmd query 0x%02x failed.\n", c);
+		pr_err("synaptics_send_cmd query 0x%02x failed.\n", c);
 		return -1;
 	}
 
@@ -60,13 +62,13 @@ static int elantech_ps2_command(struct psmouse *psmouse,
 		if (rc == 0)
 			break;
 		tries--;
-		elantech_debug("elantech.c: retrying ps2 command 0x%02x (%d).\n",
+		elantech_debug("retrying ps2 command 0x%02x (%d).\n",
 				command, tries);
 		msleep(ETP_PS2_COMMAND_DELAY);
 	} while (tries > 0);
 
 	if (rc)
-		pr_err("elantech.c: ps2 command 0x%02x failed.\n", command);
+		pr_err("ps2 command 0x%02x failed.\n", command);
 
 	return rc;
 }
@@ -108,7 +110,7 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
 	}
 
 	if (rc)
-		pr_err("elantech.c: failed to read register 0x%02x.\n", reg);
+		pr_err("failed to read register 0x%02x.\n", reg);
 	else
 		*val = param[0];
 
@@ -154,7 +156,7 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
 	}
 
 	if (rc)
-		pr_err("elantech.c: failed to write register 0x%02x with value 0x%02x.\n",
+		pr_err("failed to write register 0x%02x with value 0x%02x.\n",
 			reg, val);
 
 	return rc;
@@ -167,7 +169,7 @@ static void elantech_packet_dump(unsigned char *packet, int size)
 {
 	int	i;
 
-	printk(KERN_DEBUG "elantech.c: PS/2 packet [");
+	printk(KERN_DEBUG pr_fmt("PS/2 packet ["));
 	for (i = 0; i < size; i++)
 		printk("%s0x%02x ", (i) ? ", " : " ", packet[i]);
 	printk("]\n");
@@ -203,7 +205,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 	if (etd->jumpy_cursor) {
 		/* Discard packets that are likely to have bogus coordinates */
 		if (fingers > old_fingers) {
-			elantech_debug("elantech.c: discarding packet\n");
+			elantech_debug("discarding packet\n");
 			goto discard_packet_v1;
 		}
 	}
@@ -413,23 +415,21 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 			if (rc == 0)
 				break;
 			tries--;
-			elantech_debug("elantech.c: retrying read (%d).\n",
-					tries);
+			elantech_debug("retrying read (%d).\n", tries);
 			msleep(ETP_READ_BACK_DELAY);
 		} while (tries > 0);
 
 		if (rc) {
-			pr_err("elantech.c: failed to read back register 0x10.\n");
+			pr_err("failed to read back register 0x10.\n");
 		} else if (etd->hw_version == 1 &&
 			   !(val & ETP_R10_ABSOLUTE_MODE)) {
-			pr_err("elantech.c: touchpad refuses "
-				"to switch to absolute mode.\n");
+			pr_err("touchpad refuses to switch to absolute mode.\n");
 			rc = -1;
 		}
 	}
 
 	if (rc)
-		pr_err("elantech.c: failed to initialise registers.\n");
+		pr_err("failed to initialise registers.\n");
 
 	return rc;
 }
@@ -575,6 +575,24 @@ static struct attribute_group elantech_attr_group = {
 	.attrs = elantech_attrs,
 };
 
+static bool elantech_is_signature_valid(const unsigned char *param)
+{
+	static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 };
+	int i;
+
+	if (param[0] == 0)
+		return false;
+
+	if (param[1] == 0)
+		return true;
+
+	for (i = 0; i < ARRAY_SIZE(rates); i++)
+		if (param[2] == rates[i])
+			return false;
+
+	return true;
+}
+
 /*
  * Use magic knock to detect Elantech touchpad
  */
@@ -590,7 +608,7 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
 	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
-		pr_debug("elantech.c: sending Elantech magic knock failed.\n");
+		pr_debug("sending Elantech magic knock failed.\n");
 		return -1;
 	}
 
@@ -599,8 +617,7 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
 	 * set of magic numbers
 	 */
 	if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
-		pr_debug("elantech.c: "
-			 "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+		pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
 			 param[0], param[1], param[2]);
 		return -1;
 	}
@@ -611,20 +628,20 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
 	 * to Elantech magic knock and there might be more.
 	 */
 	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
-		pr_debug("elantech.c: failed to query firmware version.\n");
+		pr_debug("failed to query firmware version.\n");
 		return -1;
 	}
 
-	pr_debug("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+	pr_debug("Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
 		 param[0], param[1], param[2]);
 
-	if (param[0] == 0 || param[1] != 0) {
+	if (!elantech_is_signature_valid(param)) {
 		if (!force_elantech) {
-			pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
+			pr_debug("Probably not a real Elantech touchpad. Aborting.\n");
 			return -1;
 		}
 
-		pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
+		pr_debug("Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
 	}
 
 	if (set_properties) {
@@ -655,7 +672,7 @@ static int elantech_reconnect(struct psmouse *psmouse)
 		return -1;
 
 	if (elantech_set_absolute_mode(psmouse)) {
-		pr_err("elantech.c: failed to put touchpad back into absolute mode.\n");
+		pr_err("failed to put touchpad back into absolute mode.\n");
 		return -1;
 	}
 
@@ -683,7 +700,7 @@ int elantech_init(struct psmouse *psmouse)
 	 * Do the version query again so we can store the result
 	 */
 	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
-		pr_err("elantech.c: failed to query firmware version.\n");
+		pr_err("failed to query firmware version.\n");
 		goto init_fail;
 	}
 
@@ -704,14 +721,14 @@ int elantech_init(struct psmouse *psmouse)
 		etd->paritycheck = 1;
 	}
 
-	pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d.%d\n",
+	pr_info("assuming hardware version %d, firmware version %d.%d.%d\n",
 		etd->hw_version, param[0], param[1], param[2]);
 
 	if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) {
-		pr_err("elantech.c: failed to query capabilities.\n");
+		pr_err("failed to query capabilities.\n");
 		goto init_fail;
 	}
-	pr_info("elantech.c: Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
+	pr_info("Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
 		param[0], param[1], param[2]);
 	etd->capabilities = param[0];
 
@@ -721,13 +738,12 @@ int elantech_init(struct psmouse *psmouse)
 	 * to jump. Enable a workaround.
 	 */
 	if (etd->fw_version == 0x020022) {
-		pr_info("elantech.c: firmware version 2.0.34 detected, "
-			"enabling jumpy cursor workaround\n");
+		pr_info("firmware version 2.0.34 detected, enabling jumpy cursor workaround\n");
 		etd->jumpy_cursor = 1;
 	}
 
 	if (elantech_set_absolute_mode(psmouse)) {
-		pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
+		pr_err("failed to put touchpad into absolute mode.\n");
 		goto init_fail;
 	}
 
@@ -736,8 +752,7 @@ int elantech_init(struct psmouse *psmouse)
 	error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
 				   &elantech_attr_group);
 	if (error) {
-		pr_err("elantech.c: failed to create sysfs attributes, error: %d.\n",
-			error);
+		pr_err("failed to create sysfs attributes, error: %d.\n", error);
 		goto init_fail;
 	}
 

drivers/input/mouse/hgpk.c

@@ -40,8 +40,8 @@
 #include "psmouse.h"
 #include "hgpk.h"
 
-static int tpdebug;
-module_param(tpdebug, int, 0644);
+static bool tpdebug;
+module_param(tpdebug, bool, 0644);
 MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
 
 static int recalib_delta = 100;

drivers/input/mouse/logips2pp.c

@@ -250,7 +250,6 @@ static const struct ps2pp_info *get_model_info(unsigned char model)
 		if (model == ps2pp_list[i].model)
 			return &ps2pp_list[i];
 
-	printk(KERN_WARNING "logips2pp: Detected unknown logitech mouse model %d\n", model);
 	return NULL;
 }
 
@@ -285,6 +284,7 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse,
 		__set_bit(REL_HWHEEL, input_dev->relbit);
 
 	switch (model_info->kind) {
+
 	case PS2PP_KIND_WHEEL:
 		psmouse->name = "Wheel Mouse";
 		break;
@@ -343,7 +343,8 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties)
 	if (!model || !buttons)
 		return -1;
 
-	if ((model_info = get_model_info(model)) != NULL) {
+	model_info = get_model_info(model);
+	if (model_info) {
 
 /*
  * Do Logitech PS2++ / PS2T++ magic init.
@@ -379,6 +380,9 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties)
 				use_ps2pp = true;
 			}
 		}
+
+	} else {
+		printk(KERN_WARNING "logips2pp: Detected unknown logitech mouse model %d\n", model);
 	}
 
 	if (set_properties) {

drivers/input/mouse/psmouse-base.c

@@ -1245,7 +1245,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse,
 	psmouse->pktsize = 3;
 
 	if (proto && (proto->detect || proto->init)) {
-		if (proto->detect && proto->detect(psmouse, 1) < 0)
+		if (proto->detect && proto->detect(psmouse, true) < 0)
 			return -1;
 
 		if (proto->init && proto->init(psmouse) < 0)

drivers/input/mouse/synaptics.c

@@ -36,6 +36,8 @@
  * The x/y limits are taken from the Synaptics TouchPad interfacing Guide,
  * section 2.3.2, which says that they should be valid regardless of the
  * actual size of the sensor.
+ * Note that newer firmware allows querying device for maximum useable
+ * coordinates.
  */
 #define XMIN_NOMINAL 1472
 #define XMAX_NOMINAL 5472
@@ -194,24 +196,34 @@ static int synaptics_identify(struct psmouse *psmouse)
 }
 
 /*
- * Read touchpad resolution
+ * Read touchpad resolution and maximum reported coordinates
  * Resolution is left zero if touchpad does not support the query
  */
 static int synaptics_resolution(struct psmouse *psmouse)
 {
 	struct synaptics_data *priv = psmouse->private;
 	unsigned char res[3];
+	unsigned char max[3];
 
 	if (SYN_ID_MAJOR(priv->identity) < 4)
-		return 0;
-
-	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res))
-		return 0;
 
-	if ((res[0] != 0) && (res[1] & 0x80) && (res[2] != 0)) {
+	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
+		if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
 			priv->x_res = res[0]; /* x resolution in units/mm */
 			priv->y_res = res[2]; /* y resolution in units/mm */
 		}
+	}
+
+	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
+	    SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
+		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_DIMENSIONS, max)) {
+			printk(KERN_ERR "Synaptics claims to have dimensions query,"
+			       " but I'm not able to read it.\n");
+		} else {
+			priv->x_max = (max[0] << 5) | ((max[1] & 0x0f) << 1);
+			priv->y_max = (max[2] << 5) | ((max[1] & 0xf0) >> 3);
+		}
+	}
 
 	return 0;
 }
@@ -520,6 +532,7 @@ static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned cha
 		return 0;
 
 	switch (pkt_type) {
+
 	case SYN_NEWABS:
 	case SYN_NEWABS_RELAXED:
 		return (packet[idx] & newabs_rel_mask[idx]) == newabs_rslt[idx];
@@ -578,8 +591,10 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	int i;
 
 	__set_bit(EV_ABS, dev->evbit);
-	input_set_abs_params(dev, ABS_X, XMIN_NOMINAL, XMAX_NOMINAL, 0, 0);
-	input_set_abs_params(dev, ABS_Y, YMIN_NOMINAL, YMAX_NOMINAL, 0, 0);
+	input_set_abs_params(dev, ABS_X,
+			     XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0);
+	input_set_abs_params(dev, ABS_Y,
+			     YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 	__set_bit(ABS_TOOL_WIDTH, dev->absbit);
 

drivers/input/mouse/synaptics.h

@@ -19,6 +19,7 @@
 #define SYN_QUE_RESOLUTION		0x08
 #define SYN_QUE_EXT_CAPAB		0x09
 #define SYN_QUE_EXT_CAPAB_0C		0x0c
+#define SYN_QUE_EXT_DIMENSIONS		0x0d
 
 /* synatics modes */
 #define SYN_BIT_ABSOLUTE_MODE		(1 << 7)
@@ -51,6 +52,7 @@
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
 #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
 #define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100100)
+#define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -101,8 +103,8 @@ struct synaptics_data {
 	unsigned long int ext_cap;		/* Extended Capabilities */
 	unsigned long int ext_cap_0c;		/* Ext Caps from 0x0c query */
 	unsigned long int identity;		/* Identification */
-	int x_res;				/* X resolution in units/mm */
-	int y_res;				/* Y resolution in units/mm */
+	unsigned int x_res, y_res;		/* X/Y resolution in units/mm */
+	unsigned int x_max, y_max;		/* Max dimensions (from FW) */
 
 	unsigned char pkt_type;			/* packet type - old, new, etc */
 	unsigned char mode;			/* current mode byte */

drivers/input/serio/i8042-x86ia64io.h

@@ -660,8 +660,21 @@ static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *
 }
 
 static struct pnp_device_id pnp_kbd_devids[] = {
+	{ .id = "PNP0300", .driver_data = 0 },
+	{ .id = "PNP0301", .driver_data = 0 },
+	{ .id = "PNP0302", .driver_data = 0 },
 	{ .id = "PNP0303", .driver_data = 0 },
+	{ .id = "PNP0304", .driver_data = 0 },
+	{ .id = "PNP0305", .driver_data = 0 },
+	{ .id = "PNP0306", .driver_data = 0 },
+	{ .id = "PNP0309", .driver_data = 0 },
+	{ .id = "PNP030a", .driver_data = 0 },
 	{ .id = "PNP030b", .driver_data = 0 },
+	{ .id = "PNP0320", .driver_data = 0 },
+	{ .id = "PNP0343", .driver_data = 0 },
+	{ .id = "PNP0344", .driver_data = 0 },
+	{ .id = "PNP0345", .driver_data = 0 },
+	{ .id = "CPQA0D7", .driver_data = 0 },
 	{ .id = "", },
 };
 
@@ -672,6 +685,7 @@ static struct pnp_driver i8042_pnp_kbd_driver = {
 };
 
 static struct pnp_device_id pnp_aux_devids[] = {
+	{ .id = "AUI0200", .driver_data = 0 },
 	{ .id = "FJC6000", .driver_data = 0 },
 	{ .id = "FJC6001", .driver_data = 0 },
 	{ .id = "PNP0f03", .driver_data = 0 },

drivers/input/tablet/acecad.c

@@ -135,7 +135,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 	struct usb_acecad *acecad;
 	struct input_dev *input_dev;
 	int pipe, maxp;
-	int err = -ENOMEM;
+	int err;
 
 	if (interface->desc.bNumEndpoints != 1)
 		return -ENODEV;
@@ -193,29 +193,26 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 	input_dev->close = usb_acecad_close;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
-		BIT_MASK(ABS_PRESSURE);
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_TOOL_PEN) |
 		BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS) |
 		BIT_MASK(BTN_STYLUS2);
 
 	switch (id->driver_info) {
 	case 0:
-			input_dev->absmax[ABS_X] = 5000;
-			input_dev->absmax[ABS_Y] = 3750;
-			input_dev->absmax[ABS_PRESSURE] = 512;
+		input_set_abs_params(input_dev, ABS_X, 0, 5000, 4, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 3750, 4, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 512, 0, 0);
 		if (!strlen(acecad->name))
 			snprintf(acecad->name, sizeof(acecad->name),
 				"USB Acecad Flair Tablet %04x:%04x",
 				le16_to_cpu(dev->descriptor.idVendor),
 				le16_to_cpu(dev->descriptor.idProduct));
 		break;
+
 	case 1:
-			input_dev->absmax[ABS_X] = 3000;
-			input_dev->absmax[ABS_Y] = 2250;
-			input_dev->absmax[ABS_PRESSURE] = 1024;
+		input_set_abs_params(input_dev, ABS_X, 0, 53000, 4, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 2250, 4, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1024, 0, 0);
 		if (!strlen(acecad->name))
 			snprintf(acecad->name, sizeof(acecad->name),
 				"USB Acecad 302 Tablet %04x:%04x",
@@ -224,9 +221,6 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 		break;
 	}
 
-	input_dev->absfuzz[ABS_X] = 4;
-	input_dev->absfuzz[ABS_Y] = 4;
-
 	usb_fill_int_urb(acecad->irq, dev, pipe,
 			acecad->data, maxp > 8 ? 8 : maxp,
 			usb_acecad_irq, acecad, endpoint->bInterval);
@@ -252,13 +246,11 @@ static void usb_acecad_disconnect(struct usb_interface *intf)
 	struct usb_acecad *acecad = usb_get_intfdata(intf);
 
 	usb_set_intfdata(intf, NULL);
-	if (acecad) {
-		usb_kill_urb(acecad->irq);
+
 	input_unregister_device(acecad->input);
 	usb_free_urb(acecad->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
+	usb_buffer_free(acecad->usbdev, 8, acecad->data, acecad->data_dma);
 	kfree(acecad);
-	}
 }
 
 static struct usb_device_id usb_acecad_id_table [] = {

drivers/input/tablet/kbtab.c

@@ -34,10 +34,6 @@ struct kbtab {
 	struct input_dev *dev;
 	struct usb_device *usbdev;
 	struct urb *irq;
-	int x, y;
-	int button;
-	int pressure;
-	__u32 serial[2];
 	char phys[32];
 };
 
@@ -46,6 +42,7 @@ static void kbtab_irq(struct urb *urb)
 	struct kbtab *kbtab = urb->context;
 	unsigned char *data = kbtab->data;
 	struct input_dev *dev = kbtab->dev;
+	int pressure;
 	int retval;
 
 	switch (urb->status) {
@@ -63,31 +60,27 @@ static void kbtab_irq(struct urb *urb)
 		goto exit;
 	}
 
-	kbtab->x = get_unaligned_le16(&data[1]);
-	kbtab->y = get_unaligned_le16(&data[3]);
-
-	kbtab->pressure = (data[5]);
 
 	input_report_key(dev, BTN_TOOL_PEN, 1);
 
-	input_report_abs(dev, ABS_X, kbtab->x);
-	input_report_abs(dev, ABS_Y, kbtab->y);
+	input_report_abs(dev, ABS_X, get_unaligned_le16(&data[1]));
+	input_report_abs(dev, ABS_Y, get_unaligned_le16(&data[3]));
 
 	/*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/
 	input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
 
-	if (-1 == kb_pressure_click) {
-		input_report_abs(dev, ABS_PRESSURE, kbtab->pressure);
-	} else {
-		input_report_key(dev, BTN_LEFT, (kbtab->pressure > kb_pressure_click) ? 1 : 0);
-	};
+	pressure = data[5];
+	if (kb_pressure_click == -1)
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+	else
+		input_report_key(dev, BTN_LEFT, pressure > kb_pressure_click ? 1 : 0);
 
 	input_sync(dev);
 
  exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
+		err("%s - usb_submit_urb failed with result %d",
 		     __func__, retval);
 }
 
@@ -153,13 +146,11 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	input_dev->open = kbtab_open;
 	input_dev->close = kbtab_close;
 
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
-		BIT_MASK(EV_MSC);
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
-		BIT_MASK(BTN_TOUCH);
-	input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_LEFT)] |=
+		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+	input_dev->keybit[BIT_WORD(BTN_DIGI)] |=
+		BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH);
 	input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
@@ -182,7 +173,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	return 0;
 
  fail3:	usb_free_urb(kbtab->irq);
- fail2:	usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
+ fail2:	usb_buffer_free(dev, 8, kbtab->data, kbtab->data_dma);
  fail1:	input_free_device(input_dev);
 	kfree(kbtab);
 	return error;
@@ -193,13 +184,11 @@ static void kbtab_disconnect(struct usb_interface *intf)
 	struct kbtab *kbtab = usb_get_intfdata(intf);
 
 	usb_set_intfdata(intf, NULL);
-	if (kbtab) {
-		usb_kill_urb(kbtab->irq);
+
 	input_unregister_device(kbtab->dev);
 	usb_free_urb(kbtab->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma);
+	usb_buffer_free(kbtab->usbdev, 8, kbtab->data, kbtab->data_dma);
 	kfree(kbtab);
-	}
 }
 
 static struct usb_driver kbtab_driver = {

drivers/input/tablet/wacom.h

@@ -106,44 +106,18 @@ MODULE_LICENSE(DRIVER_LICENSE);
 
 struct wacom {
 	dma_addr_t data_dma;
-	struct input_dev *dev;
 	struct usb_device *usbdev;
 	struct usb_interface *intf;
 	struct urb *irq;
-	struct wacom_wac *wacom_wac;
+	struct wacom_wac wacom_wac;
 	struct mutex lock;
-	unsigned int open:1;
+	bool open;
 	char phys[32];
 };
 
-struct wacom_combo {
-	struct wacom *wacom;
-	struct urb *urb;
-};
-
 extern const struct usb_device_id wacom_ids[];
 
-extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
-extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
-extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
-extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data);
-extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value);
-extern void wacom_input_sync(void *wcombo);
-extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i4s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_tpc(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_tpc2fg(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern __u16 wacom_le16_to_cpu(unsigned char *data);
-extern __u16 wacom_be16_to_cpu(unsigned char *data);
-
+void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
+void wacom_setup_input_capabilities(struct input_dev *input_dev,
+				    struct wacom_wac *wacom_wac);
 #endif

drivers/input/tablet/wacom_wac.h

@@ -9,6 +9,8 @@
 #ifndef WACOM_WAC_H
 #define WACOM_WAC_H
 
+#include <linux/types.h>
+
 /* maximum packet length for USB devices */
 #define WACOM_PKGLEN_MAX	32
 
@@ -71,13 +73,20 @@ struct wacom_features {
 	unsigned char unitExpo;
 };
 
+struct wacom_shared {
+	bool stylus_in_proximity;
+};
+
 struct wacom_wac {
 	char name[64];
 	unsigned char *data;
-	int tool[2];
-	int id[2];
+	int tool[3];
+	int id[3];
 	__u32 serial[2];
+	int last_finger;
 	struct wacom_features features;
+	struct wacom_shared *shared;
+	struct input_dev *input;
 };
 
 #endif

drivers/input/touchscreen/Kconfig

@@ -119,6 +119,18 @@ config TOUCHSCREEN_DYNAPRO
 	  To compile this driver as a module, choose M here: the
 	  module will be called dynapro.
 
+config TOUCHSCREEN_HAMPSHIRE
+	tristate "Hampshire serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Hampshire serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hampshire.
+
 config TOUCHSCREEN_EETI
 	tristate "EETI touchscreen panel support"
 	depends on I2C

drivers/input/touchscreen/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
+obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o

drivers/input/touchscreen/hampshire.c

+/*
+ * Hampshire serial touchscreen driver
+ *
+ * Copyright (c) 2010 Adam Bennett
+ * Based on the dynapro driver (c) Tias Guns
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2010/04/08 Adam Bennett <abennett72@gmail.com>
+ *   Copied dynapro.c and edited for Hampshire 4-byte protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Hampshire serial touchscreen driver"
+
+MODULE_AUTHOR("Adam Bennett <abennett72@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40
+#define HAMPSHIRE_FORMAT_LENGTH 4
+#define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80
+
+#define HAMPSHIRE_MIN_XC 0
+#define HAMPSHIRE_MAX_XC 0x1000
+#define HAMPSHIRE_MIN_YC 0
+#define HAMPSHIRE_MAX_YC 0x1000
+
+#define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6))
+#define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9))
+#define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct hampshire {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[HAMPSHIRE_FORMAT_LENGTH];
+	char phys[32];
+};
+
+static void hampshire_process_data(struct hampshire *phampshire)
+{
+	struct input_dev *dev = phampshire->dev;
+
+	if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) {
+		input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data));
+		input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data));
+		input_report_key(dev, BTN_TOUCH,
+				 HAMPSHIRE_GET_TOUCHED(phampshire->data));
+		input_sync(dev);
+
+		phampshire->idx = 0;
+	}
+}
+
+static irqreturn_t hampshire_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct hampshire *phampshire = serio_get_drvdata(serio);
+
+	phampshire->data[phampshire->idx] = data;
+
+	if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0])
+		hampshire_process_data(phampshire);
+	else
+		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+			phampshire->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+static void hampshire_disconnect(struct serio *serio)
+{
+	struct hampshire *phampshire = serio_get_drvdata(serio);
+
+	input_get_device(phampshire->dev);
+	input_unregister_device(phampshire->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(phampshire->dev);
+	kfree(phampshire);
+}
+
+/*
+ * hampshire_connect() is the routine that is called when someone adds a
+ * new serio device that supports hampshire protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int hampshire_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct hampshire *phampshire;
+	struct input_dev *input_dev;
+	int err;
+
+	phampshire = kzalloc(sizeof(struct hampshire), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!phampshire || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	phampshire->serio = serio;
+	phampshire->dev = input_dev;
+	snprintf(phampshire->phys, sizeof(phampshire->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Hampshire Serial TouchScreen";
+	input_dev->phys = phampshire->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_HAMPSHIRE;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(phampshire->dev, ABS_X,
+			     HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0);
+	input_set_abs_params(phampshire->dev, ABS_Y,
+			     HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, phampshire);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(phampshire->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(phampshire);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id hampshire_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_HAMPSHIRE,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, hampshire_serio_ids);
+
+static struct serio_driver hampshire_drv = {
+	.driver		= {
+		.name	= "hampshire",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= hampshire_serio_ids,
+	.interrupt	= hampshire_interrupt,
+	.connect	= hampshire_connect,
+	.disconnect	= hampshire_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init hampshire_init(void)
+{
+	return serio_register_driver(&hampshire_drv);
+}
+
+static void __exit hampshire_exit(void)
+{
+	serio_unregister_driver(&hampshire_drv);
+}
+
+module_init(hampshire_init);
+module_exit(hampshire_exit);

drivers/input/touchscreen/tsc2007.c

@@ -347,6 +347,8 @@ static int __devexit tsc2007_remove(struct i2c_client *client)
 	struct tsc2007	*ts = i2c_get_clientdata(client);
 	struct tsc2007_platform_data *pdata = client->dev.platform_data;
 
+	i2c_set_clientdata(client, NULL);
+
 	tsc2007_free_irq(ts);
 
 	if (pdata->exit_platform_hw)

drivers/input/touchscreen/usbtouchscreen.c

@@ -811,12 +811,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch)
 
 	priv = usbtouch->priv;
 
-	priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL);
+	priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
+				GFP_KERNEL);
 	if (!priv->ack_buf)
 		goto err_priv;
 
-	memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt));
-
 	priv->ack = usb_alloc_urb(0, GFP_KERNEL);
 	if (!priv->ack) {
 		dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);

drivers/input/touchscreen/wm97xx-core.c

@@ -200,7 +200,7 @@ void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
 	mutex_lock(&wm->codec_mutex);
 	reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
 
-	if (status & WM97XX_GPIO_HIGH)
+	if (status == WM97XX_GPIO_HIGH)
 		reg |= gpio;
 	else
 		reg &= ~gpio;

include/linux/input.h

@@ -806,6 +806,7 @@ struct input_absinfo {
 #define BUS_HOST		0x19
 #define BUS_GSC			0x1A
 #define BUS_ATARI		0x1B
+#define BUS_SPI			0x1C
 
 /*
  * MT_TOOL types

include/linux/input/ad714x.h

+/*
+ * include/linux/input/ad714x.h
+ *
+ * AD714x is very flexible, it can be used as buttons, scrollwheel,
+ * slider, touchpad at the same time. That depends on the boards.
+ * The platform_data for the device's "struct device" holds this
+ * information.
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_INPUT_AD714X_H__
+#define __LINUX_INPUT_AD714X_H__
+
+#define STAGE_NUM              12
+#define STAGE_CFGREG_NUM       8
+#define SYS_CFGREG_NUM         8
+
+/* board information which need be initialized in arch/mach... */
+struct ad714x_slider_plat {
+	int start_stage;
+	int end_stage;
+	int max_coord;
+};
+
+struct ad714x_wheel_plat {
+	int start_stage;
+	int end_stage;
+	int max_coord;
+};
+
+struct ad714x_touchpad_plat {
+	int x_start_stage;
+	int x_end_stage;
+	int x_max_coord;
+
+	int y_start_stage;
+	int y_end_stage;
+	int y_max_coord;
+};
+
+struct ad714x_button_plat {
+	int keycode;
+	unsigned short l_mask;
+	unsigned short h_mask;
+};
+
+struct ad714x_platform_data {
+	int slider_num;
+	int wheel_num;
+	int touchpad_num;
+	int button_num;
+	struct ad714x_slider_plat *slider;
+	struct ad714x_wheel_plat *wheel;
+	struct ad714x_touchpad_plat *touchpad;
+	struct ad714x_button_plat *button;
+	unsigned short stage_cfg_reg[STAGE_NUM][STAGE_CFGREG_NUM];
+	unsigned short sys_cfg_reg[SYS_CFGREG_NUM];
+};
+
+#endif

include/linux/serio.h

@@ -196,5 +196,6 @@ static inline void serio_continue_rx(struct serio *serio)
 #define SERIO_TOUCHIT213	0x38
 #define SERIO_W8001	0x39
 #define SERIO_DYNAPRO	0x3a
+#define SERIO_HAMPSHIRE	0x3b
 
 #endif

include/linux/sysrq.h

@@ -39,41 +39,34 @@ struct sysrq_key_op {
 
 #ifdef CONFIG_MAGIC_SYSRQ
 
-extern int sysrq_on(void);
-
-/*
- * Do not use this one directly:
- */
-extern int __sysrq_enabled;
-
 /* Generic SysRq interface -- you may call it from any device driver, supplying
  * ASCII code of the key, pointer to registers and kbd/tty structs (if they
  * are available -- else NULL's).
  */
 
 void handle_sysrq(int key, struct tty_struct *tty);
-void __handle_sysrq(int key, struct tty_struct *tty, int check_mask);
 int register_sysrq_key(int key, struct sysrq_key_op *op);
 int unregister_sysrq_key(int key, struct sysrq_key_op *op);
 struct sysrq_key_op *__sysrq_get_key_op(int key);
 
+int sysrq_toggle_support(int enable_mask);
+
 #else
 
-static inline int sysrq_on(void)
+static inline void handle_sysrq(int key, struct tty_struct *tty)
 {
-	return 0;
 }
-static inline int __reterr(void)
+
+static inline int register_sysrq_key(int key, struct sysrq_key_op *op)
 {
 	return -EINVAL;
 }
-static inline void handle_sysrq(int key, struct tty_struct *tty)
+
+static inline int unregister_sysrq_key(int key, struct sysrq_key_op *op)
 {
+	return -EINVAL;
 }
 
-#define register_sysrq_key(ig,nore) __reterr()
-#define unregister_sysrq_key(ig,nore) __reterr()
-
 #endif
 
 #endif /* _LINUX_SYSRQ_H */

include/linux/tca6416_keypad.h

+/*
+ * tca6416 keypad platform support
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: Sriramakrishnan <srk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _TCA6416_KEYS_H
+#define _TCA6416_KEYS_H
+
+#include <linux/types.h>
+
+struct tca6416_button {
+	/* Configuration parameters */
+	int code;		/* input event code (KEY_*, SW_*) */
+	int active_low;
+	int type;		/* input event type (EV_KEY, EV_SW) */
+};
+
+struct tca6416_keys_platform_data {
+	struct tca6416_button *buttons;
+	int nbuttons;
+	unsigned int rep:1;	/* enable input subsystem auto repeat */
+	uint16_t pinmask;
+	uint16_t invert;
+	int irq_is_gpio;
+	int use_polling;	/* use polling if Interrupt is not connected*/
+};
+#endif

kernel/sysctl.c

@@ -163,6 +163,27 @@ static int proc_taint(struct ctl_table *table, int write,
 			       void __user *buffer, size_t *lenp, loff_t *ppos);
 #endif
 
+#ifdef CONFIG_MAGIC_SYSRQ
+static int __sysrq_enabled; /* Note: sysrq code ises it's own private copy */
+
+static int sysrq_sysctl_handler(ctl_table *table, int write,
+				void __user *buffer, size_t *lenp,
+				loff_t *ppos)
+{
+	int error;
+
+	error = proc_dointvec(table, write, buffer, lenp, ppos);
+	if (error)
+		return error;
+
+	if (write)
+		sysrq_toggle_support(__sysrq_enabled);
+
+	return 0;
+}
+
+#endif
+
 static struct ctl_table root_table[];
 static struct ctl_table_root sysctl_table_root;
 static struct ctl_table_header root_table_header = {
@@ -567,7 +588,7 @@ static struct ctl_table kern_table[] = {
 		.data		= &__sysrq_enabled,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= sysrq_sysctl_handler,
 	},
 #endif
 #ifdef CONFIG_PROC_SYSCTL