Commit a1b611be authored by Jens Axboe's avatar Jens Axboe

cy82c693 update

parent 00e7ed4d
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* linux/drivers/ide/cy82c693.c Version 0.34 Dec. 13, 1999 * linux/drivers/ide/cy82c693.c Version 0.34 Dec. 13, 1999
* *
* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>, Integrater * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrater
* *
* CYPRESS CY82C693 chipset IDE controller * CYPRESS CY82C693 chipset IDE controller
* *
...@@ -37,7 +37,8 @@ ...@@ -37,7 +37,8 @@
* added boot message * added boot message
* ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut
* added support to set DMA Controller Clock Speed * added support to set DMA Controller Clock Speed
* ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes on some drive * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes
* on some drives.
* ASK@1998-10-29: v0.3 added support to set DMA modes * ASK@1998-10-29: v0.3 added support to set DMA modes
* ASK@1998-10-28: v0.2 added support to set PIO modes * ASK@1998-10-28: v0.2 added support to set PIO modes
* ASK@1998-10-27: v0.1 first version - chipset detection * ASK@1998-10-27: v0.1 first version - chipset detection
...@@ -54,62 +55,7 @@ ...@@ -54,62 +55,7 @@
#include <asm/io.h> #include <asm/io.h>
#include "ide_modes.h" #include "ide_modes.h"
#include "cy82c693.h"
/* the current version */
#define CY82_VERSION "CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)"
/*
* The following are used to debug the driver.
*/
#define CY82C693_DEBUG_LOGS 0
#define CY82C693_DEBUG_INFO 0
/* define CY82C693_SETDMA_CLOCK to set DMA Controller Clock Speed to ATCLK */
#undef CY82C693_SETDMA_CLOCK
/*
* note: the value for busmaster timeout is tricky and i got it by trial and error !
* using a to low value will cause DMA timeouts and drop IDE performance
* using a to high value will cause audio playback to scatter
* if you know a better value or how to calc it, please let me know
*/
#define BUSMASTER_TIMEOUT 0x50 /* twice the value written in cy82c693ub datasheet */
/*
* the value above was tested on my machine and it seems to work okay
*/
/* here are the offset definitions for the registers */
#define CY82_IDE_CMDREG 0x04
#define CY82_IDE_ADDRSETUP 0x48
#define CY82_IDE_MASTER_IOR 0x4C
#define CY82_IDE_MASTER_IOW 0x4D
#define CY82_IDE_SLAVE_IOR 0x4E
#define CY82_IDE_SLAVE_IOW 0x4F
#define CY82_IDE_MASTER_8BIT 0x50
#define CY82_IDE_SLAVE_8BIT 0x51
#define CY82_INDEX_PORT 0x22
#define CY82_DATA_PORT 0x23
#define CY82_INDEX_CTRLREG1 0x01
#define CY82_INDEX_CHANNEL0 0x30
#define CY82_INDEX_CHANNEL1 0x31
#define CY82_INDEX_TIMEOUT 0x32
/* the max PIO mode - from datasheet */
#define CY82C693_MAX_PIO 4
/* the min and max PCI bus speed in MHz - from datasheet */
#define CY82C963_MIN_BUS_SPEED 25
#define CY82C963_MAX_BUS_SPEED 33
/* the struct for the PIO mode timings */
typedef struct pio_clocks_s {
byte address_time; /* Address setup (clocks) */
byte time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
byte time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
byte time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
} pio_clocks_t;
/* /*
* calc clocks using bus_speed * calc clocks using bus_speed
...@@ -138,7 +84,7 @@ static int calc_clk (int time, int bus_speed) ...@@ -138,7 +84,7 @@ static int calc_clk (int time, int bus_speed)
* for mode 3 and 4 drives 8 and 16-bit timings are the same * for mode 3 and 4 drives 8 and 16-bit timings are the same
* *
*/ */
static void compute_clocks (byte pio, pio_clocks_t *p_pclk) static void compute_clocks (u8 pio, pio_clocks_t *p_pclk)
{ {
int clk1, clk2; int clk1, clk2;
int bus_speed = system_bus_clock(); /* get speed of PCI bus */ int bus_speed = system_bus_clock(); /* get speed of PCI bus */
...@@ -151,7 +97,7 @@ static void compute_clocks (byte pio, pio_clocks_t *p_pclk) ...@@ -151,7 +97,7 @@ static void compute_clocks (byte pio, pio_clocks_t *p_pclk)
pio = CY82C693_MAX_PIO; pio = CY82C693_MAX_PIO;
/* let's calc the address setup time clocks */ /* let's calc the address setup time clocks */
p_pclk->address_time = (byte)calc_clk(ide_pio_timings[pio].setup_time, bus_speed); p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed);
/* let's calc the active and recovery time clocks */ /* let's calc the active and recovery time clocks */
clk1 = calc_clk(ide_pio_timings[pio].active_time, bus_speed); clk1 = calc_clk(ide_pio_timings[pio].active_time, bus_speed);
...@@ -170,11 +116,11 @@ static void compute_clocks (byte pio, pio_clocks_t *p_pclk) ...@@ -170,11 +116,11 @@ static void compute_clocks (byte pio, pio_clocks_t *p_pclk)
* timings than those from ide_modes.h * timings than those from ide_modes.h
*/ */
p_pclk->time_16r = (byte)clk1; p_pclk->time_16r = (u8)clk1;
p_pclk->time_16w = (byte)clk1; p_pclk->time_16w = (u8)clk1;
/* what are good values for 8bit ?? */ /* what are good values for 8bit ?? */
p_pclk->time_8 = (byte)clk1; p_pclk->time_8 = (u8)clk1;
} }
#ifdef CONFIG_BLK_DEV_IDEDMA #ifdef CONFIG_BLK_DEV_IDEDMA
...@@ -183,8 +129,7 @@ static void compute_clocks (byte pio, pio_clocks_t *p_pclk) ...@@ -183,8 +129,7 @@ static void compute_clocks (byte pio, pio_clocks_t *p_pclk)
*/ */
static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
{ {
byte index; u8 index = 0, data = 0;
byte data;
if (mode>2) /* make sure we set a valid mode */ if (mode>2) /* make sure we set a valid mode */
mode = 2; mode = 2;
...@@ -197,18 +142,18 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) ...@@ -197,18 +142,18 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
#if CY82C693_DEBUG_LOGS #if CY82C693_DEBUG_LOGS
/* for debug let's show the previous values */ /* for debug let's show the previous values */
OUT_BYTE(index, CY82_INDEX_PORT); HWIF(drive)->OUTB(index, CY82_INDEX_PORT);
data = IN_BYTE(CY82_DATA_PORT); data = HWIF(drive)->INB(CY82_DATA_PORT);
printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n",
drive->name, HWIF(drive)->channel, drive->select.b.unit, drive->name, HWIF(drive)->channel, drive->select.b.unit,
(data&0x3), ((data>>2)&1)); (data&0x3), ((data>>2)&1));
#endif /* CY82C693_DEBUG_LOGS */ #endif /* CY82C693_DEBUG_LOGS */
data = (byte)mode|(byte)(single<<2); data = (u8)mode|(u8)(single<<2);
OUT_BYTE(index, CY82_INDEX_PORT); HWIF(drive)->OUTB(index, CY82_INDEX_PORT);
OUT_BYTE(data, CY82_DATA_PORT); HWIF(drive)->OUTB(data, CY82_DATA_PORT);
#if CY82C693_DEBUG_INFO #if CY82C693_DEBUG_INFO
printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
...@@ -227,8 +172,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) ...@@ -227,8 +172,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
*/ */
data = BUSMASTER_TIMEOUT; data = BUSMASTER_TIMEOUT;
OUT_BYTE(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); HWIF(drive)->OUTB(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
OUT_BYTE(data, CY82_DATA_PORT); HWIF(drive)->OUTB(data, CY82_DATA_PORT);
#if CY82C693_DEBUG_INFO #if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
...@@ -239,13 +184,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single) ...@@ -239,13 +184,8 @@ static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
/* /*
* used to set DMA mode for CY82C693 (single and multi modes) * used to set DMA mode for CY82C693 (single and multi modes)
*/ */
static int cy82c693_dmaproc(ide_dma_action_t func, ide_drive_t *drive) int cy82c693_ide_dma_on (ide_drive_t *drive)
{ {
/*
* if the function is dma on, set dma mode for drive everything
* else is done by the defaul func
*/
if (func == ide_dma_on) {
struct hd_driveid *id = drive->id; struct hd_driveid *id = drive->id;
#if CY82C693_DEBUG_INFO #if CY82C693_DEBUG_INFO
...@@ -253,28 +193,32 @@ static int cy82c693_dmaproc(ide_dma_action_t func, ide_drive_t *drive) ...@@ -253,28 +193,32 @@ static int cy82c693_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
#endif /* CY82C693_DEBUG_INFO */ #endif /* CY82C693_DEBUG_INFO */
if (id != NULL) { if (id != NULL) {
/* Enable DMA on any drive that has DMA (multi or single) enabled */ /* Enable DMA on any drive that has DMA
* (multi or single) enabled
*/
if (id->field_valid & 2) { /* regular DMA */ if (id->field_valid & 2) { /* regular DMA */
int mmode, smode; int mmode, smode;
mmode = id->dma_mword & (id->dma_mword >> 8); mmode = id->dma_mword & (id->dma_mword >> 8);
smode = id->dma_1word & (id->dma_1word >> 8); smode = id->dma_1word & (id->dma_1word >> 8);
if (mmode != 0) if (mmode != 0) {
cy82c693_dma_enable(drive, (mmode >> 1), 0); /* enable multi */ /* enable multi */
else if (smode != 0) cy82c693_dma_enable(drive, (mmode >> 1), 0);
cy82c693_dma_enable(drive, (smode >> 1), 1); /* enable single */ } else if (smode != 0) {
/* enable single */
cy82c693_dma_enable(drive, (smode >> 1), 1);
} }
} }
} }
return ide_dmaproc(func, drive); return __ide_dma_on(drive);
} }
#endif /* CONFIG_BLK_DEV_IDEDMA */ #endif /* CONFIG_BLK_DEV_IDEDMA */
/* /*
* tune ide drive - set PIO mode * tune ide drive - set PIO mode
*/ */
static void cy82c693_tune_drive (ide_drive_t *drive, byte pio) static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
{ {
ide_hwif_t *hwif = HWIF(drive); ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev; struct pci_dev *dev = hwif->pci_dev;
...@@ -285,7 +229,9 @@ static void cy82c693_tune_drive (ide_drive_t *drive, byte pio) ...@@ -285,7 +229,9 @@ static void cy82c693_tune_drive (ide_drive_t *drive, byte pio)
if (hwif->index > 0) { /* drive is on the secondary channel */ if (hwif->index > 0) { /* drive is on the secondary channel */
dev = pci_find_slot(dev->bus->number, dev->devfn+1); dev = pci_find_slot(dev->bus->number, dev->devfn+1);
if (!dev) { if (!dev) {
printk(KERN_ERR "%s: tune_drive: Cannot find secondary interface!\n", drive->name); printk(KERN_ERR "%s: tune_drive: "
"Cannot find secondary interface!\n",
drive->name);
return; return;
} }
} }
...@@ -336,7 +282,8 @@ static void cy82c693_tune_drive (ide_drive_t *drive, byte pio) ...@@ -336,7 +282,8 @@ static void cy82c693_tune_drive (ide_drive_t *drive, byte pio)
printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio); printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
#endif /* CY82C693_DEBUG_INFO */ #endif /* CY82C693_DEBUG_INFO */
compute_clocks(pio, &pclk); /* let's calc the values for this PIO mode */ /* let's calc the values for this PIO mode */
compute_clocks(pio, &pclk);
/* now let's write the clocks registers */ /* now let's write the clocks registers */
if (drive->select.b.unit == 0) { if (drive->select.b.unit == 0) {
...@@ -389,16 +336,10 @@ static void cy82c693_tune_drive (ide_drive_t *drive, byte pio) ...@@ -389,16 +336,10 @@ static void cy82c693_tune_drive (ide_drive_t *drive, byte pio)
/* /*
* this function is called during init and is used to setup the cy82c693 chip * this function is called during init and is used to setup the cy82c693 chip
*/ */
/* unsigned int __init init_chipset_cy82c693(struct pci_dev *dev, const char *name)
* FIXME! "pci_init_cy82c693" really should replace
* the "init_cy82c693_chip", it is the correct location to tinker/setup
* the device prior to INIT.
*/
unsigned int __init pci_init_cy82c693(struct pci_dev *dev, const char *name)
{ {
#ifdef CY82C693_SETDMA_CLOCK #ifdef CY82C693_SETDMA_CLOCK
byte data; u8 data = 0;
#endif /* CY82C693_SETDMA_CLOCK */ #endif /* CY82C693_SETDMA_CLOCK */
/* write info about this verion of the driver */ /* write info about this verion of the driver */
...@@ -407,8 +348,8 @@ unsigned int __init pci_init_cy82c693(struct pci_dev *dev, const char *name) ...@@ -407,8 +348,8 @@ unsigned int __init pci_init_cy82c693(struct pci_dev *dev, const char *name)
#ifdef CY82C693_SETDMA_CLOCK #ifdef CY82C693_SETDMA_CLOCK
/* okay let's set the DMA clock speed */ /* okay let's set the DMA clock speed */
OUT_BYTE(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT);
data = IN_BYTE(CY82_DATA_PORT); data = inb(CY82_DATA_PORT);
#if CY82C693_DEBUG_INFO #if CY82C693_DEBUG_INFO
printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n", printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n",
...@@ -429,8 +370,8 @@ unsigned int __init pci_init_cy82c693(struct pci_dev *dev, const char *name) ...@@ -429,8 +370,8 @@ unsigned int __init pci_init_cy82c693(struct pci_dev *dev, const char *name)
data |= 0x03; data |= 0x03;
OUT_BYTE(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT);
OUT_BYTE(data, CY82_DATA_PORT); outb(data, CY82_DATA_PORT);
#if CY82C693_DEBUG_INFO #if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", printk (KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n",
...@@ -444,35 +385,62 @@ unsigned int __init pci_init_cy82c693(struct pci_dev *dev, const char *name) ...@@ -444,35 +385,62 @@ unsigned int __init pci_init_cy82c693(struct pci_dev *dev, const char *name)
/* /*
* the init function - called for each ide channel once * the init function - called for each ide channel once
*/ */
void __init ide_init_cy82c693(ide_hwif_t *hwif) void __init init_hwif_cy82c693(ide_hwif_t *hwif)
{ {
hwif->autodma = 0;
hwif->chipset = ide_cy82c693; hwif->chipset = ide_cy82c693;
hwif->tuneproc = &cy82c693_tune_drive; hwif->tuneproc = &cy82c693_tune_drive;
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1; hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1; hwif->drives[1].autotune = 1;
hwif->autodma = 0;
if (!hwif->dma_base)
return; return;
}
hwif->atapi_dma = 1;
hwif->mwdma_mask = 0x04;
hwif->swdma_mask = 0x04;
#ifdef CONFIG_BLK_DEV_IDEDMA #ifdef CONFIG_BLK_DEV_IDEDMA
hwif->dmaproc = &cy82c693_dmaproc; hwif->ide_dma_on = &cy82c693_ide_dma_on;
#ifdef CONFIG_IDEDMA_AUTO
if (!noautodma) if (!noautodma)
hwif->autodma = 1; hwif->autodma = 1;
#endif /* CONFIG_IDEDMA_AUTO */ hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
#endif /* CONFIG_BLK_DEV_IDEDMA */ #endif /* CONFIG_BLK_DEV_IDEDMA */
} }
extern void ide_setup_pci_device (struct pci_dev *dev, ide_pci_device_t *d); void __init init_dma_cy82c693 (ide_hwif_t *hwif, unsigned long dmabase)
{
ide_setup_dma(hwif, dmabase, 8);
}
void __init fixup_device_cy82c693 (struct pci_dev *dev, ide_pci_device_t *d) extern void ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
void __init init_setup_cy82c693 (struct pci_dev *dev, ide_pci_device_t *d)
{ {
if ((!(PCI_FUNC(dev->devfn) & 1) || if ((!(PCI_FUNC(dev->devfn) & 1) ||
(!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)))) (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
return; /* CY82C693 is more than only a IDE controller */ return; /* CY82C693 is more than only a IDE controller */
printk("%s: IDE controller on PCI bus %02x dev %02x\n",
d->name, dev->bus->number, dev->devfn);
ide_setup_pci_device(dev, d); ide_setup_pci_device(dev, d);
} }
int __init cy82c693_scan_pcidev (struct pci_dev *dev)
{
ide_pci_device_t *d;
if (dev->vendor != PCI_VENDOR_ID_CONTAQ)
return 0;
for (d = cy82c693_chipsets; d && d->vendor && d->device; ++d) {
if (((d->vendor == dev->vendor) &&
(d->device == dev->device)) &&
(d->init_setup)) {
d->init_setup(dev, d);
return 1;
}
}
return 0;
}
#ifndef CY82C693_H
#define CY82C693_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
/* the current version */
#define CY82_VERSION "CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)"
/*
* The following are used to debug the driver.
*/
#define CY82C693_DEBUG_LOGS 0
#define CY82C693_DEBUG_INFO 0
/* define CY82C693_SETDMA_CLOCK to set DMA Controller Clock Speed to ATCLK */
#undef CY82C693_SETDMA_CLOCK
/*
* NOTE: the value for busmaster timeout is tricky and I got it by
* trial and error! By using a to low value will cause DMA timeouts
* and drop IDE performance, and by using a to high value will cause
* audio playback to scatter.
* If you know a better value or how to calc it, please let me know.
*/
/* twice the value written in cy82c693ub datasheet */
#define BUSMASTER_TIMEOUT 0x50
/*
* the value above was tested on my machine and it seems to work okay
*/
/* here are the offset definitions for the registers */
#define CY82_IDE_CMDREG 0x04
#define CY82_IDE_ADDRSETUP 0x48
#define CY82_IDE_MASTER_IOR 0x4C
#define CY82_IDE_MASTER_IOW 0x4D
#define CY82_IDE_SLAVE_IOR 0x4E
#define CY82_IDE_SLAVE_IOW 0x4F
#define CY82_IDE_MASTER_8BIT 0x50
#define CY82_IDE_SLAVE_8BIT 0x51
#define CY82_INDEX_PORT 0x22
#define CY82_DATA_PORT 0x23
#define CY82_INDEX_CTRLREG1 0x01
#define CY82_INDEX_CHANNEL0 0x30
#define CY82_INDEX_CHANNEL1 0x31
#define CY82_INDEX_TIMEOUT 0x32
/* the max PIO mode - from datasheet */
#define CY82C693_MAX_PIO 4
/* the min and max PCI bus speed in MHz - from datasheet */
#define CY82C963_MIN_BUS_SPEED 25
#define CY82C963_MAX_BUS_SPEED 33
/* the struct for the PIO mode timings */
typedef struct pio_clocks_s {
u8 address_time; /* Address setup (clocks) */
u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
} pio_clocks_t;
extern void init_setup_cy82c693(struct pci_dev *, ide_pci_device_t *);
extern unsigned int init_chipset_cy82c693(struct pci_dev *, const char *);
extern void init_hwif_cy82c693(ide_hwif_t *);
extern void init_dma_cy82c693(ide_hwif_t *, unsigned long);
static ide_pci_device_t cy82c693_chipsets[] __initdata = {
{
vendor: PCI_VENDOR_ID_CONTAQ,
device: PCI_DEVICE_ID_CONTAQ_82C693,
name: "CY82C693",
init_setup: init_setup_cy82c693,
init_chipset: init_chipset_cy82c693,
init_iops: NULL,
init_hwif: init_hwif_cy82c693,
init_dma: init_dma_cy82c693,
channels: 2,
autodma: AUTODMA,
enablebits: {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
bootable: ON_BOARD,
extra: 0,
},{
vendor: 0,
device: 0,
channels: 0,
bootable: EOL,
}
};
#endif /* CY82C693_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment