Commit a1c2fd7e authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Greg Kroah-Hartman

Revert "serial: sh-sci: Allow for compressed SCIF address"

This reverts commit 2d4dd0da.

This broke earlycon on all Renesas ARM platforms using a SCIF port for the
serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value
of port->regshift.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: default avatarChris Brandt <chris.brandt@renesas.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 10c63443
...@@ -346,15 +346,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = { ...@@ -346,15 +346,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
[SCIx_SH4_SCIF_REGTYPE] = { [SCIx_SH4_SCIF_REGTYPE] = {
.regs = { .regs = {
[SCSMR] = { 0x00, 16 }, [SCSMR] = { 0x00, 16 },
[SCBRR] = { 0x02, 8 }, [SCBRR] = { 0x04, 8 },
[SCSCR] = { 0x04, 16 }, [SCSCR] = { 0x08, 16 },
[SCxTDR] = { 0x06, 8 }, [SCxTDR] = { 0x0c, 8 },
[SCxSR] = { 0x08, 16 }, [SCxSR] = { 0x10, 16 },
[SCxRDR] = { 0x0a, 8 }, [SCxRDR] = { 0x14, 8 },
[SCFCR] = { 0x0c, 16 }, [SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x0e, 16 }, [SCFDR] = { 0x1c, 16 },
[SCSPTR] = { 0x10, 16 }, [SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x12, 16 }, [SCLSR] = { 0x24, 16 },
}, },
.fifosize = 16, .fifosize = 16,
.overrun_reg = SCLSR, .overrun_reg = SCLSR,
...@@ -2837,7 +2837,7 @@ static int sci_init_single(struct platform_device *dev, ...@@ -2837,7 +2837,7 @@ static int sci_init_single(struct platform_device *dev,
{ {
struct uart_port *port = &sci_port->port; struct uart_port *port = &sci_port->port;
const struct resource *res; const struct resource *res;
unsigned int i, regtype; unsigned int i;
int ret; int ret;
sci_port->cfg = p; sci_port->cfg = p;
...@@ -2874,7 +2874,6 @@ static int sci_init_single(struct platform_device *dev, ...@@ -2874,7 +2874,6 @@ static int sci_init_single(struct platform_device *dev,
if (unlikely(sci_port->params == NULL)) if (unlikely(sci_port->params == NULL))
return -EINVAL; return -EINVAL;
regtype = sci_port->params - sci_port_params;
switch (p->type) { switch (p->type) {
case PORT_SCIFB: case PORT_SCIFB:
sci_port->rx_trigger = 48; sci_port->rx_trigger = 48;
...@@ -2929,10 +2928,6 @@ static int sci_init_single(struct platform_device *dev, ...@@ -2929,10 +2928,6 @@ static int sci_init_single(struct platform_device *dev,
port->regshift = 1; port->regshift = 1;
} }
if (regtype == SCIx_SH4_SCIF_REGTYPE)
if (sci_port->reg_size >= 0x20)
port->regshift = 1;
/* /*
* The UART port needs an IRQ value, so we peg this to the RX IRQ * The UART port needs an IRQ value, so we peg this to the RX IRQ
* for the multi-IRQ ports, which is where we are primarily * for the multi-IRQ ports, which is where we are primarily
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment