sh: Kill off broken dma page ops.

There's no point in keeping these around, they've been broken
for some time, and the dmaenging/async_tx framework provides a
far more reasonable interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/drivers/dma/Kconfig

@@ -36,23 +36,6 @@ config NR_DMA_CHANNELS
 	  support. Setting this to a higher value allows for cascading DMACs
 	  with additional channels.
 
-config DMA_PAGE_OPS
-	bool "Use DMAC for page copy/clear"
-	depends on SH_DMA && BROKEN
-	help
-	  Selecting this option will use a dual-address mode configured channel
-	  in the SH DMAC for copy_page()/clear_page(). Primarily a performance
-	  hack.
-
-config DMA_PAGE_OPS_CHANNEL
-	depends on DMA_PAGE_OPS
-	int "DMA channel for sh memory-manager page copy/clear"
-	default "3"
-	help
-	  This allows the specification of the dual address dma channel,
-	  in case channel 3 is unavailable. On the SH4, channels 1,2, and 3
-	  are dual-address capable.
-
 config SH_DMABRG
 	bool "SH7760 DMABRG support"
 	depends on CPU_SUBTYPE_SH7760

arch/sh/mm/Makefile

@@ -8,9 +8,6 @@ obj-$(CONFIG_CPU_SH2)	+= cache-sh2.o
 obj-$(CONFIG_CPU_SH3)	+= cache-sh3.o
 obj-$(CONFIG_CPU_SH4)	+= cache-sh4.o
 
-obj-$(CONFIG_DMA_PAGE_OPS)	+= pg-dma.o
-obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-
 mmu-y			:= fault-nommu.o tlb-nommu.o pg-nommu.o
 mmu-$(CONFIG_MMU)	:= fault.o clear_page.o copy_page.o tlb-flush.o	\
 			   ioremap.o
@@ -27,6 +24,7 @@ obj-$(CONFIG_CPU_SH4)		+= tlb-sh4.o pg-sh4.o
 obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
 endif
 
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 obj-$(CONFIG_32BIT)		+= pmb.o
 obj-$(CONFIG_NUMA)		+= numa.o

arch/sh/mm/pg-dma.c

-/*
- * arch/sh/mm/pg-dma.c
- *
- * Fast clear_page()/copy_page() implementation using the SH DMAC
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/semaphore.h>
-#include <asm/mmu_context.h>
-#include <asm/addrspace.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-
-/* Channel to use for page ops, must be dual-address mode capable. */
-static int dma_channel = CONFIG_DMA_PAGE_OPS_CHANNEL;
-
-static void copy_page_dma(void *to, void *from)
-{
-	/* 
-	 * This doesn't seem to get triggered until further along in the
-	 * boot process, at which point the DMAC is already initialized.
-	 * Fix this in the same fashion as clear_page_dma() in the event
-	 * that this crashes due to the DMAC not being initialized.
-	 */
-
-	flush_icache_range((unsigned long)from, PAGE_SIZE);
-	dma_write_page(dma_channel, (unsigned long)from, (unsigned long)to);
-	dma_wait_for_completion(dma_channel);
-}
-
-static void clear_page_dma(void *to)
-{
-	/*
-	 * We get invoked quite early on, if the DMAC hasn't been initialized
-	 * yet, fall back on the slow manual implementation.
-	 */
-	if (dma_info[dma_channel].chan != dma_channel) {
-		clear_page_slow(to);
-		return;
-	}
-
-	dma_write_page(dma_channel, (unsigned long)empty_zero_page,
-				    (unsigned long)to);
-
-	/*
-	 * FIXME: Something is a bit racy here, if we poll the counter right
-	 * away, we seem to lock. flushing the page from the dcache doesn't
-	 * seem to make a difference one way or the other, though either a full
-	 * icache or dcache flush does.
-	 *
-	 * The location of this is important as well, and must happen prior to
-	 * the completion loop but after the transfer was initiated.
-	 *
-	 * Oddly enough, this doesn't appear to be an issue for copy_page()..
-	 */
-	flush_icache_range((unsigned long)to, PAGE_SIZE);
-
-	dma_wait_for_completion(dma_channel);
-}
-
-static int __init pg_dma_init(void)
-{
-	int ret;
-	
-	ret = request_dma(dma_channel, "page ops");
-	if (ret != 0)
-		return ret;
-
-	copy_page = copy_page_dma;
-	clear_page = clear_page_dma;
-
-	return ret;
-}
-
-static void __exit pg_dma_exit(void)
-{
-	free_dma(dma_channel);
-}
-
-module_init(pg_dma_init);
-module_exit(pg_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("Optimized page copy/clear routines using a dual-address mode capable DMAC channel");
-MODULE_LICENSE("GPL");
-