ASoC: imx: merge sound/soc/imx into sound/soc/fsl

Freescale PowerPC and ARM/IMX families share the same SSI IP block.
The patch merges sound/soc/imx into sound/soc/fsl, so that the possible
code sharing and consolidation can happen.

This is a plain merge, except that menuconfig SND_POWERPC_SOC is added
in Kconfig for PowerPC platform as a correspondence to SND_IMX_SOC for
IMX platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig

@@ -100,6 +100,7 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_SOC=y
+CONFIG_SND_POWERPC_SOC=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -140,6 +140,7 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_PPC is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
+CONFIG_SND_POWERPC_SOC=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -142,6 +142,7 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_PPC is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
+CONFIG_SND_POWERPC_SOC=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y

sound/soc/Kconfig

@@ -35,7 +35,6 @@ source "sound/soc/blackfin/Kconfig"
 source "sound/soc/davinci/Kconfig"
 source "sound/soc/ep93xx/Kconfig"
 source "sound/soc/fsl/Kconfig"
-source "sound/soc/imx/Kconfig"
 source "sound/soc/jz4740/Kconfig"
 source "sound/soc/nuc900/Kconfig"
 source "sound/soc/omap/Kconfig"

sound/soc/Makefile

@@ -12,7 +12,6 @@ obj-$(CONFIG_SND_SOC)	+= blackfin/
 obj-$(CONFIG_SND_SOC)	+= davinci/
 obj-$(CONFIG_SND_SOC)	+= ep93xx/
 obj-$(CONFIG_SND_SOC)	+= fsl/
-obj-$(CONFIG_SND_SOC)   += imx/
 obj-$(CONFIG_SND_SOC)	+= jz4740/
 obj-$(CONFIG_SND_SOC)	+= mid-x86/
 obj-$(CONFIG_SND_SOC)	+= mxs/

sound/soc/fsl/Kconfig

+config SND_SOC_FSL_SSI
+	tristate
+
+menuconfig SND_POWERPC_SOC
+	tristate "SoC Audio for Freescale PowerPC CPUs"
+	depends on FSL_SOC
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the PowerPC CPUs.
+
+if SND_POWERPC_SOC
+
 config SND_MPC52xx_DMA
 	tristate
 
@@ -68,3 +80,83 @@ config SND_MPC52xx_SOC_EFIKA
 	help
 	  Say Y if you want to add support for sound on the Efika.
 
+endif # SND_POWERPC_SOC
+
+menuconfig SND_IMX_SOC
+	tristate "SoC Audio for Freescale i.MX CPUs"
+	depends on ARCH_MXC
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the i.MX CPUs.
+
+if SND_IMX_SOC
+
+config SND_SOC_IMX_SSI
+	tristate
+
+config SND_SOC_IMX_PCM
+	tristate
+
+config SND_MXC_SOC_FIQ
+	tristate
+	select FIQ
+	select SND_SOC_IMX_PCM
+
+config SND_MXC_SOC_MX2
+	tristate
+	select SND_SOC_DMAENGINE_PCM
+	select SND_SOC_IMX_PCM
+
+config SND_SOC_IMX_AUDMUX
+	tristate
+
+config SND_MXC_SOC_WM1133_EV1
+	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
+	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
+	select SND_SOC_WM8350
+	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
+	help
+	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
+	  PMIC board with WM8835x fitted.
+
+config SND_SOC_MX27VIS_AIC32X4
+	tristate "SoC audio support for Visstrim M10 boards"
+	depends on MACH_IMX27_VISSTRIM_M10 && I2C
+	select SND_SOC_TLV320AIC32X4
+	select SND_MXC_SOC_MX2
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
+	help
+	  Say Y if you want to add support for SoC audio on Visstrim SM10
+	  board with TLV320AIC32X4 codec.
+
+config SND_SOC_PHYCORE_AC97
+	tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+	depends on MACH_PCM043 || MACH_PCA100
+	select SND_SOC_AC97_BUS
+	select SND_SOC_WM9712
+	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
+	help
+	  Say Y if you want to add support for SoC audio on Phytec phyCORE
+	  and phyCARD boards in AC97 mode
+
+config SND_SOC_EUKREA_TLV320
+	tristate "Eukrea TLV320"
+	depends on MACH_EUKREA_MBIMX27_BASEBOARD \
+		|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
+		|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
+		|| MACH_EUKREA_MBIMXSD51_BASEBOARD
+	depends on I2C
+	select SND_SOC_TLV320AIC23
+	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
+	help
+	  Enable I2S based access to the TLV320AIC23B codec attached
+	  to the SSI interface
+
+endif # SND_IMX_SOC

sound/soc/fsl/Makefile

@@ -21,3 +21,25 @@ obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o
 obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o
 obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o
 
+# i.MX Platform Support
+snd-soc-imx-ssi-objs := imx-ssi.o
+snd-soc-imx-audmux-objs := imx-audmux.o
+
+obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
+obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
+
+obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
+snd-soc-imx-pcm-y := imx-pcm.o
+snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
+snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
+
+# i.MX Machine Support
+snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
+snd-soc-phycore-ac97-objs := phycore-ac97.o
+snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
+snd-soc-wm1133-ev1-objs := wm1133-ev1.o
+
+obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
+obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
+obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
+obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o

sound/soc/imx/Kconfig

-menuconfig SND_IMX_SOC
-	tristate "SoC Audio for Freescale i.MX CPUs"
-	depends on ARCH_MXC
-	help
-	  Say Y or M if you want to add support for codecs attached to
-	  the i.MX SSI interface.
-
-
-if SND_IMX_SOC
-
-config SND_SOC_IMX_SSI
-	tristate
-
-config SND_SOC_IMX_PCM
-	tristate
-
-config SND_MXC_SOC_FIQ
-	tristate
-	select FIQ
-	select SND_SOC_IMX_PCM
-
-config SND_MXC_SOC_MX2
-	select SND_SOC_DMAENGINE_PCM
-	tristate
-	select SND_SOC_IMX_PCM
-
-config SND_SOC_IMX_AUDMUX
-	tristate
-
-config SND_MXC_SOC_WM1133_EV1
-	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
-	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
-	select SND_SOC_WM8350
-	select SND_MXC_SOC_FIQ
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
-	  PMIC board with WM8835x fitted.
-
-config SND_SOC_MX27VIS_AIC32X4
-	tristate "SoC audio support for Visstrim M10 boards"
-	depends on MACH_IMX27_VISSTRIM_M10 && I2C
-	select SND_SOC_TLV320AIC32X4
-	select SND_MXC_SOC_MX2
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Say Y if you want to add support for SoC audio on Visstrim SM10
-	  board with TLV320AIC32X4 codec.
-
-config SND_SOC_PHYCORE_AC97
-	tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
-	depends on MACH_PCM043 || MACH_PCA100
-	select SND_SOC_AC97_BUS
-	select SND_SOC_WM9712
-	select SND_MXC_SOC_FIQ
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Say Y if you want to add support for SoC audio on Phytec phyCORE
-	  and phyCARD boards in AC97 mode
-
-config SND_SOC_EUKREA_TLV320
-	tristate "Eukrea TLV320"
-	depends on MACH_EUKREA_MBIMX27_BASEBOARD \
-		|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
-		|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
-		|| MACH_EUKREA_MBIMXSD51_BASEBOARD
-	depends on I2C
-	select SND_SOC_TLV320AIC23
-	select SND_MXC_SOC_FIQ
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Enable I2S based access to the TLV320AIC23B codec attached
-	  to the SSI interface
-
-endif	# SND_IMX_SOC

sound/soc/imx/Makefile

-# i.MX Platform Support
-snd-soc-imx-ssi-objs := imx-ssi.o
-snd-soc-imx-audmux-objs := imx-audmux.o
-
-obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
-obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
-
-obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
-snd-soc-imx-pcm-y := imx-pcm.o
-snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
-snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
-
-# i.MX Machine Support
-snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
-snd-soc-phycore-ac97-objs := phycore-ac97.o
-snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
-snd-soc-wm1133-ev1-objs := wm1133-ev1.o
-
-obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
-obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
-obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
-obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o