Commit a2d0e3f1 authored by Luciano Coelho's avatar Luciano Coelho Committed by John W. Linville

wl1271: limit TX power to 25dBm for every channel

The wl1271 firmware supports maximun 25.5dBm, so the driver was returning
-EINVALID to anything above that.  This patch uses the channel max_power
option to limit the TX power to 25dBm.
Signed-off-by: default avatarLuciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: default avatarJuuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 9cf25fed
......@@ -1675,19 +1675,19 @@ static struct ieee80211_rate wl1271_rates[] = {
/* can't be const, mac80211 writes to this */
static struct ieee80211_channel wl1271_channels[] = {
{ .hw_value = 1, .center_freq = 2412},
{ .hw_value = 2, .center_freq = 2417},
{ .hw_value = 3, .center_freq = 2422},
{ .hw_value = 4, .center_freq = 2427},
{ .hw_value = 5, .center_freq = 2432},
{ .hw_value = 6, .center_freq = 2437},
{ .hw_value = 7, .center_freq = 2442},
{ .hw_value = 8, .center_freq = 2447},
{ .hw_value = 9, .center_freq = 2452},
{ .hw_value = 10, .center_freq = 2457},
{ .hw_value = 11, .center_freq = 2462},
{ .hw_value = 12, .center_freq = 2467},
{ .hw_value = 13, .center_freq = 2472},
{ .hw_value = 1, .center_freq = 2412, .max_power = 25 },
{ .hw_value = 2, .center_freq = 2417, .max_power = 25 },
{ .hw_value = 3, .center_freq = 2422, .max_power = 25 },
{ .hw_value = 4, .center_freq = 2427, .max_power = 25 },
{ .hw_value = 5, .center_freq = 2432, .max_power = 25 },
{ .hw_value = 6, .center_freq = 2437, .max_power = 25 },
{ .hw_value = 7, .center_freq = 2442, .max_power = 25 },
{ .hw_value = 8, .center_freq = 2447, .max_power = 25 },
{ .hw_value = 9, .center_freq = 2452, .max_power = 25 },
{ .hw_value = 10, .center_freq = 2457, .max_power = 25 },
{ .hw_value = 11, .center_freq = 2462, .max_power = 25 },
{ .hw_value = 12, .center_freq = 2467, .max_power = 25 },
{ .hw_value = 13, .center_freq = 2472, .max_power = 25 },
};
/* can't be const, mac80211 writes to this */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment