Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia

Pull PCMCIA update from Dominik Brodowski:
 "A few PCMCIA fixes and cleanups are available in the PCMCIA tree.

  Most of them are trivial and self-explanatory.  Of particular note are
  the last three patches which add an important hardware quirk for
  Toshiba ToPIC95 sockets (or BIOS breakage on systems with these
  sockets), fix resource leaks in yenta_socket enable/disable call
  paths, and fix a regression caused by patch 1c6c9b1d since v4.0.

  Alan stated he is OK with me pushing this patch upstream.  Once it
  works out well in your tree, I will push it to stable for 4.0/4.1 as
  well"

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia:
  pcmcia: do not break rsrc_nonstatic when handling anonymous cards
  pcmcia: Fix resource leaks in yenta_probe() and _close()
  Disable write buffering on Toshiba ToPIC95
  pcmcia: Convert dev_printk to dev_<level>
  pcmcia/vrc4171: Remove typedefs for enums and struct
  pcmcia: Remove typedef in structs and emum
  pcmcia: Remove typedef tuple_flags
  drivers: pcmcia: electra_cf.c fix checkpatch error and warnings
  drivers: pcmcia: ds.c fix checkpatch errors
  PCMCIA: Remove commented references to dead class_device_create_file()
  drivers/pcmcia/electra_cf.c: add missing iounmap and kfree
  pcmcia: replace open-coded ARRAY_SIZE with macro

drivers/char/pcmcia/cm4040_cs.c

@@ -532,8 +532,7 @@ static int reader_config(struct pcmcia_device *link, int devno)
 
 	fail_rc = pcmcia_enable_device(link);
 	if (fail_rc != 0) {
-		dev_printk(KERN_INFO, &link->dev,
-			   "pcmcia_enable_device failed 0x%x\n",
+		dev_info(&link->dev, "pcmcia_enable_device failed 0x%x\n",
 			 fail_rc);
 		goto cs_release;
 	}

drivers/pcmcia/cistpl.c

@@ -94,8 +94,7 @@ static void __iomem *set_cis_map(struct pcmcia_socket *s,
 		mem->res = pcmcia_find_mem_region(0, s->map_size,
 						s->map_size, 0, s);
 		if (mem->res == NULL) {
-			dev_printk(KERN_NOTICE, &s->dev,
-				   "cs: unable to map card memory!\n");
+			dev_notice(&s->dev, "cs: unable to map card memory!\n");
 			return NULL;
 		}
 		s->cis_virt = NULL;
@@ -381,8 +380,7 @@ int verify_cis_cache(struct pcmcia_socket *s)
 
 	buf = kmalloc(256, GFP_KERNEL);
 	if (buf == NULL) {
-		dev_printk(KERN_WARNING, &s->dev,
-			   "no memory for verifying CIS\n");
+		dev_warn(&s->dev, "no memory for verifying CIS\n");
 		return -ENOMEM;
 	}
 	mutex_lock(&s->ops_mutex);
@@ -414,14 +412,14 @@ int pcmcia_replace_cis(struct pcmcia_socket *s,
 		       const u8 *data, const size_t len)
 {
 	if (len > CISTPL_MAX_CIS_SIZE) {
-		dev_printk(KERN_WARNING, &s->dev, "replacement CIS too big\n");
+		dev_warn(&s->dev, "replacement CIS too big\n");
 		return -EINVAL;
 	}
 	mutex_lock(&s->ops_mutex);
 	kfree(s->fake_cis);
 	s->fake_cis = kmalloc(len, GFP_KERNEL);
 	if (s->fake_cis == NULL) {
-		dev_printk(KERN_WARNING, &s->dev, "no memory to replace CIS\n");
+		dev_warn(&s->dev, "no memory to replace CIS\n");
 		mutex_unlock(&s->ops_mutex);
 		return -ENOMEM;
 	}
@@ -434,17 +432,17 @@ int pcmcia_replace_cis(struct pcmcia_socket *s,
 
 /* The high-level CIS tuple services */
 
-typedef struct tuple_flags {
+struct tuple_flags {
 	u_int		link_space:4;
 	u_int		has_link:1;
 	u_int		mfc_fn:3;
 	u_int		space:4;
-} tuple_flags;
+};
 
-#define LINK_SPACE(f)	(((tuple_flags *)(&(f)))->link_space)
-#define HAS_LINK(f)	(((tuple_flags *)(&(f)))->has_link)
-#define MFC_FN(f)	(((tuple_flags *)(&(f)))->mfc_fn)
-#define SPACE(f)	(((tuple_flags *)(&(f)))->space)
+#define LINK_SPACE(f)	(((struct tuple_flags *)(&(f)))->link_space)
+#define HAS_LINK(f)	(((struct tuple_flags *)(&(f)))->has_link)
+#define MFC_FN(f)	(((struct tuple_flags *)(&(f)))->mfc_fn)
+#define SPACE(f)	(((struct tuple_flags *)(&(f)))->space)
 
 int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function,
 			tuple_t *tuple)
@@ -1451,26 +1449,16 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info)
 done:
 	/* invalidate CIS cache on failure */
 	if (!dev_ok || !ident_ok || !count) {
-#if defined(CONFIG_MTD_PCMCIA_ANONYMOUS)
-		/* Set up as an anonymous card. If we don't have anonymous
-		   memory support then just error the card as there is no
-		   point trying to second guess.
-
-		   Note: some cards have just a device entry, it may be
-		   worth extending support to cover these in future */
-		if (!dev_ok || !ident_ok) {
-			dev_info(&s->dev, "no CIS, assuming an anonymous memory card.\n");
-			pcmcia_replace_cis(s, "\xFF", 1);
-			count = 1;
-			ret = 0;
-		} else
-#endif
-		{
 		mutex_lock(&s->ops_mutex);
 		destroy_cis_cache(s);
 		mutex_unlock(&s->ops_mutex);
+		/* We differentiate between dev_ok, ident_ok and count
+		   failures to allow for an override for anonymous cards
+		   in ds.c */
+		if (!dev_ok || !ident_ok)
 			ret = -EIO;
-		}
+		else
+			ret = -EFAULT;
 	}
 
 	if (info)

drivers/pcmcia/cs.c

@@ -177,7 +177,7 @@ int pcmcia_register_socket(struct pcmcia_socket *socket)
 
 	wait_for_completion(&socket->thread_done);
 	if (!socket->thread) {
-		dev_printk(KERN_WARNING, &socket->dev,
+		dev_warn(&socket->dev,
 			 "PCMCIA: warning: socket thread did not start\n");
 		return -EIO;
 	}
@@ -275,7 +275,7 @@ static int socket_reset(struct pcmcia_socket *skt)
 		msleep(unreset_check * 10);
 	}
 
-	dev_printk(KERN_ERR, &skt->dev, "time out after reset.\n");
+	dev_err(&skt->dev, "time out after reset\n");
 	return -ETIMEDOUT;
 }
 
@@ -325,7 +325,7 @@ static void socket_shutdown(struct pcmcia_socket *s)
 
 	s->ops->get_status(s, &status);
 	if (status & SS_POWERON) {
-		dev_printk(KERN_ERR, &s->dev,
+		dev_err(&s->dev,
 			"*** DANGER *** unable to remove socket power\n");
 	}
 
@@ -356,15 +356,13 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 	}
 
 	if (status & SS_PENDING) {
-		dev_printk(KERN_ERR, &skt->dev,
-			   "voltage interrogation timed out.\n");
+		dev_err(&skt->dev, "voltage interrogation timed out\n");
 		return -ETIMEDOUT;
 	}
 
 	if (status & SS_CARDBUS) {
 		if (!(skt->features & SS_CAP_CARDBUS)) {
-			dev_printk(KERN_ERR, &skt->dev,
-				"cardbus cards are not supported.\n");
+			dev_err(&skt->dev, "cardbus cards are not supported\n");
 			return -EINVAL;
 		}
 		skt->state |= SOCKET_CARDBUS;
@@ -379,7 +377,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 	else if (!(status & SS_XVCARD))
 		skt->socket.Vcc = skt->socket.Vpp = 50;
 	else {
-		dev_printk(KERN_ERR, &skt->dev, "unsupported voltage key.\n");
+		dev_err(&skt->dev, "unsupported voltage key\n");
 		return -EIO;
 	}
 
@@ -396,7 +394,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
 
 	skt->ops->get_status(skt, &status);
 	if (!(status & SS_POWERON)) {
-		dev_printk(KERN_ERR, &skt->dev, "unable to apply power.\n");
+		dev_err(&skt->dev, "unable to apply power\n");
 		return -EIO;
 	}
 
@@ -429,8 +427,7 @@ static int socket_insert(struct pcmcia_socket *skt)
 	if (ret == 0) {
 		skt->state |= SOCKET_PRESENT;
 
-		dev_printk(KERN_NOTICE, &skt->dev,
-			   "pccard: %s card inserted into slot %d\n",
+		dev_notice(&skt->dev, "pccard: %s card inserted into slot %d\n",
 			   (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
 			   skt->sock);
 
@@ -558,8 +555,7 @@ static int socket_resume(struct pcmcia_socket *skt)
 
 static void socket_remove(struct pcmcia_socket *skt)
 {
-	dev_printk(KERN_NOTICE, &skt->dev,
-		   "pccard: card ejected from slot %d\n", skt->sock);
+	dev_notice(&skt->dev, "pccard: card ejected from slot %d\n", skt->sock);
 	socket_shutdown(skt);
 }
 
@@ -605,8 +601,7 @@ static int pccardd(void *__skt)
 	/* register with the device core */
 	ret = device_register(&skt->dev);
 	if (ret) {
-		dev_printk(KERN_WARNING, &skt->dev,
-			   "PCMCIA: unable to register socket\n");
+		dev_warn(&skt->dev, "PCMCIA: unable to register socket\n");
 		skt->thread = NULL;
 		complete(&skt->thread_done);
 		return 0;

drivers/pcmcia/ds.c

@@ -284,7 +284,7 @@ static int pcmcia_device_probe(struct device *dev)
 		dev_dbg(dev, "base %x, regs %x", p_dev->config_base,
 			p_dev->config_regs);
 	} else {
-		dev_printk(KERN_INFO, dev,
+		dev_info(dev,
 			 "pcmcia: could not parse base and rmask0 of CIS\n");
 		p_dev->config_base = 0;
 		p_dev->config_regs = 0;
@@ -382,13 +382,13 @@ static int pcmcia_device_remove(struct device *dev)
 
 	/* check for proper unloading */
 	if (p_dev->_irq || p_dev->_io || p_dev->_locked)
-		dev_printk(KERN_INFO, dev,
+		dev_info(dev,
 			 "pcmcia: driver %s did not release config properly\n",
 			 p_drv->name);
 
 	for (i = 0; i < MAX_WIN; i++)
 		if (p_dev->_win & CLIENT_WIN_REQ(i))
-			dev_printk(KERN_INFO, dev,
+			dev_info(dev,
 				 "pcmcia: driver %s did not release window properly\n",
 				 p_drv->name);
 
@@ -566,7 +566,7 @@ static struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
 			c->io[i].name = p_dev->devname;
 			c->io[i].flags = IORESOURCE_IO;
 		}
-		for (i = 0; i< MAX_WIN; i++) {
+		for (i = 0; i < MAX_WIN; i++) {
 			c->mem[i].name = p_dev->devname;
 			c->mem[i].flags = IORESOURCE_MEM;
 		}
@@ -578,8 +578,7 @@ static struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
 
 	mutex_unlock(&s->ops_mutex);
 
-	dev_printk(KERN_NOTICE, &p_dev->dev,
-		   "pcmcia: registering new device %s (IRQ: %d)\n",
+	dev_notice(&p_dev->dev, "pcmcia: registering new device %s (IRQ: %d)\n",
 		   p_dev->devname, p_dev->irq);
 
 	pcmcia_device_query(p_dev);
@@ -634,9 +633,25 @@ static int pcmcia_card_add(struct pcmcia_socket *s)
 
 	ret = pccard_validate_cis(s, &no_chains);
 	if (ret || !no_chains) {
+#if defined(CONFIG_MTD_PCMCIA_ANONYMOUS)
+		/* Set up as an anonymous card. If we don't have anonymous
+		   memory support then just error the card as there is no
+		   point trying to second guess.
+
+		   Note: some cards have just a device entry, it may be
+		   worth extending support to cover these in future */
+		if (ret == -EIO) {
+			dev_info(&s->dev, "no CIS, assuming an anonymous memory card.\n");
+			pcmcia_replace_cis(s, "\xFF", 1);
+			no_chains = 1;
+			ret = 0;
+		} else
+#endif
+		{
 			dev_dbg(&s->dev, "invalid CIS or invalid resources\n");
 			return -ENODEV;
 		}
+	}
 
 	if (!pccard_read_tuple(s, BIND_FN_ALL, CISTPL_LONGLINK_MFC, &mfc))
 		no_funcs = mfc.nfn;
@@ -651,7 +666,7 @@ static int pcmcia_card_add(struct pcmcia_socket *s)
 }
 
 
-static int pcmcia_requery_callback(struct device *dev, void * _data)
+static int pcmcia_requery_callback(struct device *dev, void *_data)
 {
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
 	if (!p_dev->dev.driver) {
@@ -729,7 +744,7 @@ static void pcmcia_requery(struct pcmcia_socket *s)
  * the one provided by the card is broken. The firmware files reside in
  * /lib/firmware/ in userspace.
  */
-static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
+static int pcmcia_load_firmware(struct pcmcia_device *dev, char *filename)
 {
 	struct pcmcia_socket *s = dev->socket;
 	const struct firmware *fw;
@@ -745,16 +760,14 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
 	if (request_firmware(&fw, filename, &dev->dev) == 0) {
 		if (fw->size >= CISTPL_MAX_CIS_SIZE) {
 			ret = -EINVAL;
-			dev_printk(KERN_ERR, &dev->dev,
-				   "pcmcia: CIS override is too big\n");
+			dev_err(&dev->dev, "pcmcia: CIS override is too big\n");
 			goto release;
 		}
 
 		if (!pcmcia_replace_cis(s, fw->data, fw->size))
 			ret = 0;
 		else {
-			dev_printk(KERN_ERR, &dev->dev,
-				   "pcmcia: CIS override failed\n");
+			dev_err(&dev->dev, "pcmcia: CIS override failed\n");
 			goto release;
 		}
 
@@ -781,7 +794,8 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
 
 #else /* !CONFIG_PCMCIA_LOAD_CIS */
 
-static inline int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
+static inline int pcmcia_load_firmware(struct pcmcia_device *dev,
+				       char *filename)
 {
 	return -ENODEV;
 }
@@ -1148,9 +1162,8 @@ static int pcmcia_dev_suspend(struct device *dev, pm_message_t state)
 	if (p_drv->suspend) {
 		ret = p_drv->suspend(p_dev);
 		if (ret) {
-			dev_printk(KERN_ERR, dev,
-				   "pcmcia: device %s (driver %s) did "
-				   "not want to go to sleep (%d)\n",
+			dev_err(dev,
+				"pcmcia: device %s (driver %s) did not want to go to sleep (%d)\n",
 				p_dev->devname, p_drv->name, ret);
 			mutex_lock(&p_dev->socket->ops_mutex);
 			p_dev->suspended = 0;
@@ -1206,7 +1219,7 @@ static int pcmcia_dev_resume(struct device *dev)
 }
 
 
-static int pcmcia_bus_suspend_callback(struct device *dev, void * _data)
+static int pcmcia_bus_suspend_callback(struct device *dev, void *_data)
 {
 	struct pcmcia_socket *skt = _data;
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
@@ -1217,7 +1230,7 @@ static int pcmcia_bus_suspend_callback(struct device *dev, void * _data)
 	return runtime_suspend(dev);
 }
 
-static int pcmcia_bus_resume_callback(struct device *dev, void * _data)
+static int pcmcia_bus_resume_callback(struct device *dev, void *_data)
 {
 	struct pcmcia_socket *skt = _data;
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
@@ -1342,14 +1355,13 @@ static int pcmcia_bus_add_socket(struct device *dev,
 
 	socket = pcmcia_get_socket(socket);
 	if (!socket) {
-		dev_printk(KERN_ERR, dev,
-			   "PCMCIA obtaining reference to socket failed\n");
+		dev_err(dev, "PCMCIA obtaining reference to socket failed\n");
 		return -ENODEV;
 	}
 
 	ret = sysfs_create_bin_file(&dev->kobj, &pccard_cis_attr);
 	if (ret) {
-		dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n");
+		dev_err(dev, "PCMCIA registration failed\n");
 		pcmcia_put_socket(socket);
 		return ret;
 	}
@@ -1361,7 +1373,7 @@ static int pcmcia_bus_add_socket(struct device *dev,
 
 	ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback);
 	if (ret) {
-		dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n");
+		dev_err(dev, "PCMCIA registration failed\n");
 		pcmcia_put_socket(socket);
 		return ret;
 	}

drivers/pcmcia/electra_cf.c

@@ -48,14 +48,14 @@ struct electra_cf_socket {
 
 	struct platform_device	*ofdev;
 	unsigned long		mem_phys;
-	void __iomem *		mem_base;
+	void __iomem		*mem_base;
 	unsigned long		mem_size;
-	void __iomem *		io_virt;
+	void __iomem		*io_virt;
 	unsigned int		io_base;
 	unsigned int		io_size;
 	u_int			irq;
 	struct resource		iomem;
-	void __iomem *		gpio_base;
+	void __iomem		*gpio_base;
 	int			gpio_detect;
 	int			gpio_vsense;
 	int			gpio_3v;
@@ -202,7 +202,7 @@ static int electra_cf_probe(struct platform_device *ofdev)
 	if (err)
 		return -EINVAL;
 
-	cf = kzalloc(sizeof *cf, GFP_KERNEL);
+	cf = kzalloc(sizeof(*cf), GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
 
@@ -216,8 +216,10 @@ static int electra_cf_probe(struct platform_device *ofdev)
 	cf->io_size = PAGE_ALIGN(resource_size(&io));
 
 	area = __get_vm_area(cf->io_size, 0, PHB_IO_BASE, PHB_IO_END);
-	if (area == NULL)
-		return -ENOMEM;
+	if (area == NULL) {
+		status = -ENOMEM;
+		goto fail1;
+	}
 
 	cf->io_virt = (void __iomem *)(area->addr);
 
@@ -320,6 +322,7 @@ static int electra_cf_probe(struct platform_device *ofdev)
 		iounmap(cf->mem_base);
 	if (cf->gpio_base)
 		iounmap(cf->gpio_base);
+	if (area)
 		device_init_wakeup(&ofdev->dev, 0);
 	kfree(cf);
 	return status;
@@ -369,5 +372,5 @@ static struct platform_driver electra_cf_driver = {
 module_platform_driver(electra_cf_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
+MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
 MODULE_DESCRIPTION("PA Semi Electra CF driver");

drivers/pcmcia/i82365.c

@@ -132,14 +132,14 @@ module_param(recov_time, int, 0444);
 
 /*====================================================================*/
 
-typedef struct cirrus_state_t {
+struct cirrus_state {
     u_char		misc1, misc2;
     u_char		timer[6];
-} cirrus_state_t;
+};
 
-typedef struct vg46x_state_t {
+struct vg46x_state {
     u_char		ctl, ema;
-} vg46x_state_t;
+};
 
 struct i82365_socket {
     u_short		type, flags;
@@ -149,8 +149,8 @@ struct i82365_socket {
     u_short		psock;
     u_char		cs_irq, intr;
     union {
-	cirrus_state_t		cirrus;
-	vg46x_state_t		vg46x;
+	struct cirrus_state		cirrus;
+	struct vg46x_state		vg46x;
     } state;
 };
 
@@ -173,11 +173,11 @@ static struct timer_list poll_timer;
 /*====================================================================*/
 
 /* These definitions must match the pcic table! */
-typedef enum pcic_id {
+enum pcic_id {
     IS_I82365A, IS_I82365B, IS_I82365DF,
     IS_IBM, IS_RF5Cx96, IS_VLSI, IS_VG468, IS_VG469,
     IS_PD6710, IS_PD672X, IS_VT83C469,
-} pcic_id;
+};
 
 /* Flags for classifying groups of controllers */
 #define IS_VADEM	0x0001
@@ -189,12 +189,12 @@ typedef enum pcic_id {
 #define IS_REGISTERED	0x2000
 #define IS_ALIVE	0x8000
 
-typedef struct pcic_t {
+struct pcic {
     char		*name;
     u_short		flags;
-} pcic_t;
+};
 
-static pcic_t pcic[] = {
+static struct pcic pcic[] = {
     { "Intel i82365sl A step", 0 },
     { "Intel i82365sl B step", 0 },
     { "Intel i82365sl DF", IS_DF_PWR },
@@ -208,7 +208,7 @@ static pcic_t pcic[] = {
     { "VIA VT83C469", IS_CIRRUS|IS_VIA },
 };
 
-#define PCIC_COUNT	(sizeof(pcic)/sizeof(pcic_t))
+#define PCIC_COUNT	ARRAY_SIZE(pcic)
 
 /*====================================================================*/
 
@@ -294,7 +294,7 @@ static void i365_set_pair(u_short sock, u_short reg, u_short data)
 static void cirrus_get_state(u_short s)
 {
     int i;
-    cirrus_state_t *p = &socket[s].state.cirrus;
+    struct cirrus_state *p = &socket[s].state.cirrus;
     p->misc1 = i365_get(s, PD67_MISC_CTL_1);
     p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
     p->misc2 = i365_get(s, PD67_MISC_CTL_2);
@@ -306,7 +306,7 @@ static void cirrus_set_state(u_short s)
 {
     int i;
     u_char misc;
-    cirrus_state_t *p = &socket[s].state.cirrus;
+    struct cirrus_state *p = &socket[s].state.cirrus;
 
     misc = i365_get(s, PD67_MISC_CTL_2);
     i365_set(s, PD67_MISC_CTL_2, p->misc2);
@@ -321,7 +321,7 @@ static void cirrus_set_state(u_short s)
 static u_int __init cirrus_set_opts(u_short s, char *buf)
 {
     struct i82365_socket *t = &socket[s];
-    cirrus_state_t *p = &socket[s].state.cirrus;
+    struct cirrus_state *p = &socket[s].state.cirrus;
     u_int mask = 0xffff;
 
     if (has_ring == -1) has_ring = 1;
@@ -377,7 +377,7 @@ static u_int __init cirrus_set_opts(u_short s, char *buf)
 
 static void vg46x_get_state(u_short s)
 {
-    vg46x_state_t *p = &socket[s].state.vg46x;
+    struct vg46x_state *p = &socket[s].state.vg46x;
     p->ctl = i365_get(s, VG468_CTL);
     if (socket[s].type == IS_VG469)
 	p->ema = i365_get(s, VG469_EXT_MODE);
@@ -385,7 +385,7 @@ static void vg46x_get_state(u_short s)
 
 static void vg46x_set_state(u_short s)
 {
-    vg46x_state_t *p = &socket[s].state.vg46x;
+    struct vg46x_state *p = &socket[s].state.vg46x;
     i365_set(s, VG468_CTL, p->ctl);
     if (socket[s].type == IS_VG469)
 	i365_set(s, VG469_EXT_MODE, p->ema);
@@ -393,7 +393,7 @@ static void vg46x_set_state(u_short s)
 
 static u_int __init vg46x_set_opts(u_short s, char *buf)
 {
-    vg46x_state_t *p = &socket[s].state.vg46x;
+    struct vg46x_state *p = &socket[s].state.vg46x;
     
     flip(p->ctl, VG468_CTL_ASYNC, async_clock);
     flip(p->ema, VG469_MODE_CABLE, cable_mode);
@@ -1285,13 +1285,6 @@ static int __init init_i82365(void)
 	    ret = pcmcia_register_socket(&socket[i].socket);
 	    if (!ret)
 		    socket[i].flags |= IS_REGISTERED;
-
-#if 0 /* driver model ordering issue */
-	   class_device_create_file(&socket[i].socket.dev,
-			   	    &class_device_attr_info);
-	   class_device_create_file(&socket[i].socket.dev,
-			   	    &class_device_attr_exca);
-#endif
     }
 
     /* Finally, schedule a polling interrupt */

drivers/pcmcia/m32r_cfc.c

@@ -754,13 +754,6 @@ static int __init init_m32r_pcc(void)
 		ret = pcmcia_register_socket(&socket[i].socket);
 		if (!ret)
 			socket[i].flags |= IS_REGISTERED;
-
-#if 0	/* driver model ordering issue */
-		class_device_create_file(&socket[i].socket.dev,
-					 &class_device_attr_info);
-		class_device_create_file(&socket[i].socket.dev,
-					 &class_device_attr_exca);
-#endif
 	}
 
 	/* Finally, schedule a polling interrupt */

drivers/pcmcia/m32r_pcc.c

@@ -716,13 +716,6 @@ static int __init init_m32r_pcc(void)
 		ret = pcmcia_register_socket(&socket[i].socket);
 		if (!ret)
 			socket[i].flags |= IS_REGISTERED;
-
-#if 0	/* driver model ordering issue */
-		class_device_create_file(&socket[i].socket.dev,
-					 &class_device_attr_info);
-		class_device_create_file(&socket[i].socket.dev,
-					 &class_device_attr_exca);
-#endif
 	}
 
 	/* Finally, schedule a polling interrupt */

drivers/pcmcia/pcmcia_cis.c

@@ -44,7 +44,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
 
 	buf = kmalloc(256, GFP_KERNEL);
 	if (buf == NULL) {
-		dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n");
+		dev_warn(&s->dev, "no memory to read tuple\n");
 		return -ENOMEM;
 	}
 	tuple.DesiredTuple = code;
@@ -94,7 +94,7 @@ int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function,
 
 	buf = kzalloc(256, GFP_KERNEL);
 	if (buf == NULL) {
-		dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n");
+		dev_warn(&s->dev, "no memory to read tuple\n");
 		return -ENOMEM;
 	}
 

drivers/pcmcia/pcmcia_resource.c

@@ -508,8 +508,7 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev)
 	s->socket.Vpp = p_dev->vpp;
 	if (s->ops->set_socket(s, &s->socket)) {
 		mutex_unlock(&s->ops_mutex);
-		dev_printk(KERN_WARNING, &p_dev->dev,
-			   "Unable to set socket state\n");
+		dev_warn(&p_dev->dev, "Unable to set socket state\n");
 		return -EINVAL;
 	}
 
@@ -736,13 +735,11 @@ __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
 	ret = request_irq(p_dev->irq, handler, 0, p_dev->devname, p_dev->priv);
 	if (ret) {
 		ret = pcmcia_request_irq(p_dev, handler);
-		dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
-			"request for exclusive IRQ could not be fulfilled.\n");
-		dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
-			"needs updating to supported shared IRQ lines.\n");
+		dev_warn(&p_dev->dev, "pcmcia: request for exclusive IRQ could not be fulfilled\n");
+		dev_warn(&p_dev->dev, "pcmcia: the driver needs updating to supported shared IRQ lines\n");
 	}
 	if (ret)
-		dev_printk(KERN_INFO, &p_dev->dev, "request_irq() failed\n");
+		dev_info(&p_dev->dev, "request_irq() failed\n");
 	else
 		p_dev->_irq = 1;
 

drivers/pcmcia/rsrc_nonstatic.c

@@ -191,15 +191,13 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
 	int any;
 	u_char *b, hole, most;
 
-	dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
-		base, base+num-1);
+	dev_info(&s->dev, "cs: IO port probe %#x-%#x:", base, base+num-1);
 
 	/* First, what does a floating port look like? */
 	b = kzalloc(256, GFP_KERNEL);
 	if (!b) {
-		printk("\n");
-		dev_printk(KERN_ERR, &s->dev,
-			"do_io_probe: unable to kmalloc 256 bytes");
+		pr_cont("\n");
+		dev_err(&s->dev, "do_io_probe: unable to kmalloc 256 bytes\n");
 		return;
 	}
 	for (i = base, most = 0; i < base+num; i += 8) {
@@ -223,7 +221,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
 		res = claim_region(s, i, 8, IORESOURCE_IO, "PCMCIA ioprobe");
 		if (!res) {
 			if (!any)
-				printk(" excluding");
+				pr_cont(" excluding");
 			if (!bad)
 				bad = any = i;
 			continue;
@@ -234,13 +232,13 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
 		free_region(res);
 		if (j < 8) {
 			if (!any)
-				printk(" excluding");
+				pr_cont(" excluding");
 			if (!bad)
 				bad = any = i;
 		} else {
 			if (bad) {
 				sub_interval(&s_data->io_db, bad, i-bad);
-				printk(" %#x-%#x", bad, i-1);
+				pr_cont(" %#x-%#x", bad, i-1);
 				bad = 0;
 			}
 		}
@@ -248,15 +246,15 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
 	if (bad) {
 		if ((num > 16) && (bad == base) && (i == base+num)) {
 			sub_interval(&s_data->io_db, bad, i-bad);
-			printk(" nothing: probe failed.\n");
+			pr_cont(" nothing: probe failed.\n");
 			return;
 		} else {
 			sub_interval(&s_data->io_db, bad, i-bad);
-			printk(" %#x-%#x", bad, i-1);
+			pr_cont(" %#x-%#x", bad, i-1);
 		}
 	}
 
-	printk(any ? "\n" : " clean.\n");
+	pr_cont("%s\n", !any ? " clean" : "");
 }
 #endif
 
@@ -413,7 +411,7 @@ static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num,
 	struct socket_data *s_data = s->resource_data;
 	u_long i, j, bad, fail, step;
 
-	dev_printk(KERN_INFO, &s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
+	dev_info(&s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
 		 base, base+num-1);
 	bad = fail = 0;
 	step = (num < 0x20000) ? 0x2000 : ((num>>4) & ~0x1fff);
@@ -438,13 +436,13 @@ static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num,
 		}
 		if (i != j) {
 			if (!bad)
-				printk(" excluding");
-			printk(" %#05lx-%#05lx", i, j-1);
+				pr_cont(" excluding");
+			pr_cont(" %#05lx-%#05lx", i, j-1);
 			sub_interval(&s_data->mem_db, i, j-i);
 			bad += j-i;
 		}
 	}
-	printk(bad ? "\n" : " clean.\n");
+	pr_cont("%s\n", !bad ? " clean" : "");
 	return num - bad;
 }
 
@@ -495,7 +493,7 @@ static int validate_mem(struct pcmcia_socket *s, unsigned int probe_mask)
 			return 0;
 		if (s_data->mem_db_valid.next != &s_data->mem_db_valid)
 			return 0;
-		dev_printk(KERN_NOTICE, &s->dev,
+		dev_notice(&s->dev,
 			   "cs: warning: no high memory space available!\n");
 		return -ENODEV;
 	}
@@ -975,7 +973,7 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
 			if (res == &ioport_resource)
 				continue;
 
-			dev_printk(KERN_INFO, &s->cb_dev->dev,
+			dev_info(&s->cb_dev->dev,
 				 "pcmcia: parent PCI bridge window: %pR\n",
 				 res);
 			if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end))
@@ -990,7 +988,7 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
 			if (res == &iomem_resource)
 				continue;
 
-			dev_printk(KERN_INFO, &s->cb_dev->dev,
+			dev_info(&s->cb_dev->dev,
 				 "pcmcia: parent PCI bridge window: %pR\n",
 				 res);
 			if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end))

drivers/pcmcia/ti113x.h

@@ -372,8 +372,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 
 	mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
 	devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
-	dev_printk(KERN_INFO, &socket->dev->dev,
-		   "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
+	dev_info(&socket->dev->dev, "TI: mfunc 0x%08x, devctl 0x%02x\n",
+		 mfunc, devctl);
 
 	/* make sure PCI interrupts are enabled before probing */
 	ti_init(socket);
@@ -387,7 +387,7 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 	 * We're here which means PCI interrupts are _not_ delivered. try to
 	 * find the right setting (all serial or parallel)
 	 */
-	dev_printk(KERN_INFO, &socket->dev->dev,
+	dev_info(&socket->dev->dev,
 		 "TI: probing PCI interrupt failed, trying to fix\n");
 
 	/* for serial PCI make sure MFUNC3 is set to IRQSER */
@@ -412,7 +412,7 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 
 				pci_irq_status = yenta_probe_cb_irq(socket);
 				if (pci_irq_status == 1) {
-					dev_printk(KERN_INFO, &socket->dev->dev,
+					dev_info(&socket->dev->dev,
 						 "TI: all-serial interrupts ok\n");
 					mfunc_old = mfunc;
 					goto out;
@@ -428,7 +428,7 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 		}
 
 		/* serial PCI interrupts not working fall back to parallel */
-		dev_printk(KERN_INFO, &socket->dev->dev,
+		dev_info(&socket->dev->dev,
 			 "TI: falling back to parallel PCI interrupts\n");
 		devctl &= ~TI113X_DCR_IMODE_MASK;
 		devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
@@ -460,8 +460,7 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 	pci_irq_status = yenta_probe_cb_irq(socket);
 	if (pci_irq_status == 1) {
 		mfunc_old = mfunc;
-		dev_printk(KERN_INFO, &socket->dev->dev,
-			   "TI: parallel PCI interrupts ok\n");
+		dev_info(&socket->dev->dev, "TI: parallel PCI interrupts ok\n");
 	} else {
 		/* not working, back to old value */
 		mfunc = mfunc_old;
@@ -473,9 +472,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 out:
 	if (pci_irq_status < 1) {
 		socket->cb_irq = 0;
-		dev_printk(KERN_INFO, &socket->dev->dev,
-			   "Yenta TI: no PCI interrupts. Fish. "
-			   "Please report.\n");
+		dev_info(&socket->dev->dev,
+			 "Yenta TI: no PCI interrupts. Fish. Please report.\n");
 	}
 }
 
@@ -547,8 +545,7 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 
 	mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
 	devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
-	dev_printk(KERN_INFO, &socket->dev->dev,
-		   "TI: mfunc 0x%08x, devctl 0x%02x\n",
+	dev_info(&socket->dev->dev, "TI: mfunc 0x%08x, devctl 0x%02x\n",
 		 mfunc, devctl);
 
 	/* if IRQs are configured as tied, align irq of func1 with func0 */
@@ -568,7 +565,7 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 	 * We're here which means PCI interrupts are _not_ delivered. try to
 	 * find the right setting
 	 */
-	dev_printk(KERN_INFO, &socket->dev->dev,
+	dev_info(&socket->dev->dev,
 		 "TI: probing PCI interrupt failed, trying to fix\n");
 
 	/* if all serial: set INTRTIE, probe again */
@@ -578,7 +575,7 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 		if (ti12xx_tie_interrupts(socket, &old_irq)) {
 			pci_irq_status = yenta_probe_cb_irq(socket);
 			if (pci_irq_status == 1) {
-				dev_printk(KERN_INFO, &socket->dev->dev,
+				dev_info(&socket->dev->dev,
 					 "TI: all-serial interrupts, tied ok\n");
 				goto out;
 			}
@@ -616,7 +613,7 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 
 			pci_irq_status = yenta_probe_cb_irq(socket);
 			if (pci_irq_status == 1) {
-				dev_printk(KERN_INFO, &socket->dev->dev,
+				dev_info(&socket->dev->dev,
 					 "TI: parallel PCI interrupts ok\n");
 				goto out;
 			}
@@ -632,7 +629,7 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 		if (ti12xx_tie_interrupts(socket, &old_irq)) {
 			pci_irq_status = yenta_probe_cb_irq(socket);
 			if (pci_irq_status == 1) {
-				dev_printk(KERN_INFO, &socket->dev->dev,
+				dev_info(&socket->dev->dev,
 					 "TI: parallel PCI interrupts, tied ok\n");
 				goto out;
 			}
@@ -644,7 +641,7 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 out:
 	if (pci_irq_status < 1) {
 		socket->cb_irq = 0;
-		dev_printk(KERN_INFO, &socket->dev->dev,
+		dev_info(&socket->dev->dev,
 			 "TI: no PCI interrupts. Fish. Please report.\n");
 	}
 }
@@ -849,12 +846,11 @@ static int ti12xx_override(struct yenta_socket *socket)
 	/* make sure that memory burst is active */
 	val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
 	if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
-		dev_printk(KERN_INFO, &socket->dev->dev,
-			   "Disabling CLKRUN feature\n");
+		dev_info(&socket->dev->dev, "Disabling CLKRUN feature\n");
 		val |= TI113X_SCR_KEEPCLK;
 	}
 	if (!(val & TI122X_SCR_MRBURSTUP)) {
-		dev_printk(KERN_INFO, &socket->dev->dev,
+		dev_info(&socket->dev->dev,
 			 "Enabling burst memory read transactions\n");
 		val |= TI122X_SCR_MRBURSTUP;
 	}
@@ -866,11 +862,9 @@ static int ti12xx_override(struct yenta_socket *socket)
 	 * CSC interrupts to PCI rather than INTVAL.
 	 */
 	val = config_readb(socket, TI1250_DIAGNOSTIC);
-	dev_printk(KERN_INFO, &socket->dev->dev,
-		   "Using %s to route CSC interrupts to PCI\n",
+	dev_info(&socket->dev->dev, "Using %s to route CSC interrupts to PCI\n",
 		 (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
-	dev_printk(KERN_INFO, &socket->dev->dev,
-		   "Routing CardBus interrupts to %s\n",
+	dev_info(&socket->dev->dev, "Routing CardBus interrupts to %s\n",
 		 (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
 
 	/* do irqrouting, depending on function */
@@ -896,7 +890,7 @@ static int ti1250_override(struct yenta_socket *socket)
 		diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
 
 	if (diag != old) {
-		dev_printk(KERN_INFO, &socket->dev->dev,
+		dev_info(&socket->dev->dev,
 			 "adjusting diagnostic: %02x -> %02x\n",
 			 old, diag);
 		config_writeb(socket, TI1250_DIAGNOSTIC, diag);
@@ -963,8 +957,8 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
 		/* default to clear TLTEnable bit, old behaviour */
 		test_c9 &= ~ENE_TEST_C9_TLTENABLE;
 
-	dev_printk(KERN_INFO, &socket->dev->dev,
-		   "EnE: chaning testregister 0xC9, %02x -> %02x\n",
+	dev_info(&socket->dev->dev,
+		 "EnE: changing testregister 0xC9, %02x -> %02x\n",
 		 old_c9, test_c9);
 	config_writeb(socket, ENE_TEST_C9, test_c9);
 }

drivers/pcmcia/topic.h

@@ -104,6 +104,9 @@
 #define TOPIC_EXCA_IF_CONTROL		0x3e	/* 8 bit */
 #define TOPIC_EXCA_IFC_33V_ENA		0x01
 
+#define TOPIC_PCI_CFG_PPBCN		0x3e	/* 16-bit */
+#define TOPIC_PCI_CFG_PPBCN_WBEN	0x0400
+
 static void topic97_zoom_video(struct pcmcia_socket *sock, int onoff)
 {
 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
@@ -138,6 +141,7 @@ static int topic97_override(struct yenta_socket *socket)
 static int topic95_override(struct yenta_socket *socket)
 {
 	u8 fctrl;
+	u16 ppbcn;
 
 	/* enable 3.3V support for 16bit cards */
 	fctrl = exca_readb(socket, TOPIC_EXCA_IF_CONTROL);
@@ -146,6 +150,18 @@ static int topic95_override(struct yenta_socket *socket)
 	/* tell yenta to use exca registers to power 16bit cards */
 	socket->flags |= YENTA_16BIT_POWER_EXCA | YENTA_16BIT_POWER_DF;
 
+	/* Disable write buffers to prevent lockups under load with numerous
+	   Cardbus cards, observed on Tecra 500CDT and reported elsewhere on the
+	   net.  This is not a power-on default according to the datasheet
+	   but some BIOSes seem to set it. */
+	if (pci_read_config_word(socket->dev, TOPIC_PCI_CFG_PPBCN, &ppbcn) == 0
+	    && socket->dev->revision <= 7
+	    && (ppbcn & TOPIC_PCI_CFG_PPBCN_WBEN)) {
+		ppbcn &= ~TOPIC_PCI_CFG_PPBCN_WBEN;
+		pci_write_config_word(socket->dev, TOPIC_PCI_CFG_PPBCN, ppbcn);
+		dev_info(&socket->dev->dev, "Disabled ToPIC95 Cardbus write buffers.\n");
+	}
+
 	return 0;
 }
 

drivers/pcmcia/vrc4171_card.c

@@ -84,32 +84,32 @@ MODULE_LICENSE("GPL");
 #define IO_MAX_MAPS	2
 #define MEM_MAX_MAPS	5
 
-typedef enum {
+enum vrc4171_slot {
 	SLOT_PROBE = 0,
 	SLOT_NOPROBE_IO,
 	SLOT_NOPROBE_MEM,
 	SLOT_NOPROBE_ALL,
 	SLOT_INITIALIZED,
-} vrc4171_slot_t;
+};
 
-typedef enum {
+enum vrc4171_slotb {
 	SLOTB_IS_NONE,
 	SLOTB_IS_PCCARD,
 	SLOTB_IS_CF,
 	SLOTB_IS_FLASHROM,
-} vrc4171_slotb_t;
+};
 
-typedef struct vrc4171_socket {
-	vrc4171_slot_t slot;
+struct vrc4171_socket {
+	enum vrc4171_slot slot;
 	struct pcmcia_socket pcmcia_socket;
 	char name[24];
 	int csc_irq;
 	int io_irq;
 	spinlock_t lock;
-} vrc4171_socket_t;
+};
 
-static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS];
-static vrc4171_slotb_t vrc4171_slotb = SLOTB_IS_NONE;
+static struct vrc4171_socket vrc4171_sockets[CARD_MAX_SLOTS];
+static enum vrc4171_slotb vrc4171_slotb = SLOTB_IS_NONE;
 static char vrc4171_card_name[] = "NEC VRC4171 Card Controller";
 static unsigned int vrc4171_irq;
 static uint16_t vrc4171_irq_mask = 0xdeb8;
@@ -141,7 +141,7 @@ static inline uint16_t vrc4171_get_irq_status(void)
 	return inw(INTERRUPT_STATUS);
 }
 
-static inline void vrc4171_set_multifunction_pin(vrc4171_slotb_t config)
+static inline void vrc4171_set_multifunction_pin(enum vrc4171_slotb config)
 {
 	uint16_t config1;
 
@@ -234,7 +234,7 @@ static inline int search_nonuse_irq(void)
 
 static int pccard_init(struct pcmcia_socket *sock)
 {
-	vrc4171_socket_t *socket;
+	struct vrc4171_socket *socket;
 	unsigned int slot;
 
 	sock->features |= SS_CAP_PCCARD | SS_CAP_PAGE_REGS;
@@ -317,7 +317,7 @@ static inline uint8_t set_Vcc_value(u_char Vcc)
 
 static int pccard_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 {
-	vrc4171_socket_t *socket;
+	struct vrc4171_socket *socket;
 	unsigned int slot;
 	uint8_t voltage, power, control, cscint;
 
@@ -517,7 +517,7 @@ static inline unsigned int get_events(int slot)
 
 static irqreturn_t pccard_interrupt(int irq, void *dev_id)
 {
-	vrc4171_socket_t *socket;
+	struct vrc4171_socket *socket;
 	unsigned int events;
 	irqreturn_t retval = IRQ_NONE;
 	uint16_t status;
@@ -567,7 +567,7 @@ static inline void reserve_using_irq(int slot)
 
 static int vrc4171_add_sockets(void)
 {
-	vrc4171_socket_t *socket;
+	struct vrc4171_socket *socket;
 	int slot, retval;
 
 	for (slot = 0; slot < CARD_MAX_SLOTS; slot++) {
@@ -617,7 +617,7 @@ static int vrc4171_add_sockets(void)
 
 static void vrc4171_remove_sockets(void)
 {
-	vrc4171_socket_t *socket;
+	struct vrc4171_socket *socket;
 	int slot;
 
 	for (slot = 0; slot < CARD_MAX_SLOTS; slot++) {

drivers/pcmcia/yenta_socket.c

@@ -712,9 +712,8 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
 		pcibios_bus_to_resource(dev->bus, res, &region);
 		if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0)
 			return 0;
-		dev_printk(KERN_INFO, &dev->dev,
-			   "Preassigned resource %d busy or not available, "
-			   "reconfiguring...\n",
+		dev_info(&dev->dev,
+			 "Preassigned resource %d busy or not available, reconfiguring...\n",
 			 nr);
 	}
 
@@ -738,7 +737,7 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
 			return 1;
 	}
 
-	dev_printk(KERN_INFO, &dev->dev,
+	dev_info(&dev->dev,
 		 "no resource of type %x available, trying to continue...\n",
 		 type);
 	res->start = res->end = res->flags = 0;
@@ -802,13 +801,13 @@ static void yenta_close(struct pci_dev *dev)
 	else
 		del_timer_sync(&sock->poll_timer);
 
-	if (sock->base)
 	iounmap(sock->base);
 	yenta_free_resources(sock);
 
 	pci_release_regions(dev);
 	pci_disable_device(dev);
 	pci_set_drvdata(dev, NULL);
+	kfree(sock);
 }
 
 
@@ -979,7 +978,7 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
 	socket->probe_status = 0;
 
 	if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
-		dev_printk(KERN_WARNING, &socket->dev->dev,
+		dev_warn(&socket->dev->dev,
 			 "request_irq() in yenta_probe_cb_irq() failed!\n");
 		return -1;
 	}
@@ -1019,8 +1018,7 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i
 	else
 		socket->socket.irq_mask = 0;
 
-	dev_printk(KERN_INFO, &socket->dev->dev,
-		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
+	dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
 		 socket->socket.irq_mask, socket->cb_irq);
 }
 
@@ -1111,9 +1109,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 
 	/* Show that the wanted subordinate number is not possible: */
 	if (cardbus_bridge->busn_res.end > upper_limit)
-		dev_printk(KERN_WARNING, &cardbus_bridge->dev,
-			   "Upper limit for fixing this "
-			   "bridge's parent bridge: #%02x\n", upper_limit);
+		dev_warn(&cardbus_bridge->dev,
+			 "Upper limit for fixing this bridge's parent bridge: #%02x\n",
+			 upper_limit);
 
 	/* If we have room to increase the bridge's subordinate number, */
 	if (bridge_to_fix->busn_res.end < upper_limit) {
@@ -1122,11 +1120,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 		unsigned char subordinate_to_assign =
 			min_t(int, cardbus_bridge->busn_res.end, upper_limit);
 
-		dev_printk(KERN_INFO, &bridge_to_fix->dev,
-			   "Raising subordinate bus# of parent "
-			   "bus (#%02x) from #%02x to #%02x\n",
+		dev_info(&bridge_to_fix->dev,
+			 "Raising subordinate bus# of parent bus (#%02x) from #%02x to #%02x\n",
 			 bridge_to_fix->number,
-			   (int)bridge_to_fix->busn_res.end, subordinate_to_assign);
+			 (int)bridge_to_fix->busn_res.end,
+			 subordinate_to_assign);
 
 		/* Save the new subordinate in the bus struct of the bridge */
 		bridge_to_fix->busn_res.end = subordinate_to_assign;
@@ -1153,8 +1151,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	 * Bail out if so.
 	 */
 	if (!dev->subordinate) {
-		dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
-			   "(try 'pci=assign-busses')\n");
+		dev_err(&dev->dev, "no bus associated! (try 'pci=assign-busses')\n");
 		return -ENODEV;
 	}
 
@@ -1189,7 +1186,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto disable;
 
 	if (!pci_resource_start(dev, 0)) {
-		dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
+		dev_err(&dev->dev, "No cardbus resource!\n");
 		ret = -ENODEV;
 		goto release;
 	}
@@ -1208,7 +1205,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	 * report the subsystem vendor and device for help debugging
 	 * the irq stuff...
 	 */
-	dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
+	dev_info(&dev->dev, "CardBus bridge found [%04x:%04x]\n",
 		 dev->subsystem_vendor, dev->subsystem_device);
 
 	yenta_config_init(socket);
@@ -1239,12 +1236,10 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		setup_timer(&socket->poll_timer, yenta_interrupt_wrapper,
 			    (unsigned long)socket);
 		mod_timer(&socket->poll_timer, jiffies + HZ);
-		dev_printk(KERN_INFO, &dev->dev,
-			   "no PCI IRQ, CardBus support disabled for this "
-			   "socket.\n");
-		dev_printk(KERN_INFO, &dev->dev,
-			   "check your BIOS CardBus, BIOS IRQ or ACPI "
-			   "settings.\n");
+		dev_info(&dev->dev,
+			 "no PCI IRQ, CardBus support disabled for this socket.\n");
+		dev_info(&dev->dev,
+			 "check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
 	} else {
 		socket->socket.features |= SS_CAP_CARDBUS;
 	}
@@ -1252,32 +1247,41 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Figure out what the dang thing can do for the PCMCIA layer... */
 	yenta_interrogate(socket);
 	yenta_get_socket_capabilities(socket, isa_interrupts);
-	dev_printk(KERN_INFO, &dev->dev,
-		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+	dev_info(&dev->dev, "Socket status: %08x\n",
+		 cb_readl(socket, CB_SOCKET_STATE));
 
 	yenta_fixup_parent_bridge(dev->subordinate);
 
 	/* Register it with the pcmcia layer.. */
 	ret = pcmcia_register_socket(&socket->socket);
-	if (ret == 0) {
+	if (ret)
+		goto free_irq;
+
 	/* Add the yenta register attributes */
 	ret = device_create_file(&dev->dev, &dev_attr_yenta_registers);
-		if (ret == 0)
-			goto out;
+	if (ret)
+		goto unregister_socket;
+
+	return ret;
 
 	/* error path... */
+ unregister_socket:
 	pcmcia_unregister_socket(&socket->socket);
-	}
-
+ free_irq:
+	if (socket->cb_irq)
+		free_irq(socket->cb_irq, socket);
+	else
+		del_timer_sync(&socket->poll_timer);
  unmap:
 	iounmap(socket->base);
+	yenta_free_resources(socket);
  release:
 	pci_release_regions(dev);
  disable:
 	pci_disable_device(dev);
  free:
+	pci_set_drvdata(dev, NULL);
 	kfree(socket);
- out:
 	return ret;
 }