Commit a41c789b authored by Stefano Brivio's avatar Stefano Brivio Committed by David S. Miller

selftests: pmtu: Add pmtu_vti4_default_mtu test

This test checks that the MTU assigned by default to a vti (IPv4)
interface created on top of veth is simply veth's MTU minus the
length of the encapsulated IPv4 header.
Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 36455bd1
#!/bin/sh #!/bin/sh
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
# #
# Check that route PMTU values match expectations # Check that route PMTU values match expectations, and that initial device MTU
# values are assigned correctly
# #
# Tests currently implemented: # Tests currently implemented:
# #
...@@ -11,19 +12,32 @@ ...@@ -11,19 +12,32 @@
# created by exceeding link layer MTU with ping to other endpoint. Then # created by exceeding link layer MTU with ping to other endpoint. Then
# decrease and increase MTU of tunnel, checking that route exception PMTU # decrease and increase MTU of tunnel, checking that route exception PMTU
# changes accordingly # changes accordingly
#
# - pmtu_vti4_default_mtu
# Set up vti4 tunnel on top of veth, in two namespaces with matching
# endpoints. Check that MTU assigned to vti interface is the MTU of the
# lower layer (veth) minus additional lower layer headers (zero, for veth)
# minus IPv4 header length
tests=" tests="
pmtu_vti6_exception vti6: PMTU exceptions" pmtu_vti6_exception vti6: PMTU exceptions
pmtu_vti4_default_mtu vti4: default MTU assignment"
NS_A="ns-$(mktemp -u XXXXXX)" NS_A="ns-$(mktemp -u XXXXXX)"
NS_B="ns-$(mktemp -u XXXXXX)" NS_B="ns-$(mktemp -u XXXXXX)"
ns_a="ip netns exec ${NS_A}" ns_a="ip netns exec ${NS_A}"
ns_b="ip netns exec ${NS_B}" ns_b="ip netns exec ${NS_B}"
veth4_a_addr="192.168.1.1"
veth4_b_addr="192.168.1.2"
veth4_mask="24"
veth6_a_addr="fd00:1::a" veth6_a_addr="fd00:1::a"
veth6_b_addr="fd00:1::b" veth6_b_addr="fd00:1::b"
veth6_mask="64" veth6_mask="64"
vti4_a_addr="192.168.2.1"
vti4_b_addr="192.168.2.2"
vti4_mask="24"
vti6_a_addr="fd00:2::a" vti6_a_addr="fd00:2::a"
vti6_b_addr="fd00:2::b" vti6_b_addr="fd00:2::b"
vti6_mask="64" vti6_mask="64"
...@@ -50,6 +64,9 @@ setup_veth() { ...@@ -50,6 +64,9 @@ setup_veth() {
${ns_a} ip link add veth_a type veth peer name veth_b || return 1 ${ns_a} ip link add veth_a type veth peer name veth_b || return 1
${ns_a} ip link set veth_b netns ${NS_B} ${ns_a} ip link set veth_b netns ${NS_B}
${ns_a} ip addr add ${veth4_a_addr}/${veth4_mask} dev veth_a
${ns_b} ip addr add ${veth4_b_addr}/${veth4_mask} dev veth_b
${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a ${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a
${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b ${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b
...@@ -57,19 +74,36 @@ setup_veth() { ...@@ -57,19 +74,36 @@ setup_veth() {
${ns_b} ip link set veth_b up ${ns_b} ip link set veth_b up
} }
setup_vti6() { setup_vti() {
${ns_a} ip link add vti_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 || return 1 proto=${1}
${ns_b} ip link add vti_b type vti6 local ${veth6_b_addr} remote ${veth6_a_addr} key 10 veth_a_addr="${2}"
veth_b_addr="${3}"
vti_a_addr="${4}"
vti_b_addr="${5}"
vti_mask=${6}
${ns_a} ip addr add ${vti6_a_addr}/${vti6_mask} dev vti_a [ ${proto} -eq 6 ] && vti_type="vti6" || vti_type="vti"
${ns_b} ip addr add ${vti6_b_addr}/${vti6_mask} dev vti_b
${ns_a} ip link set vti_a up ${ns_a} ip link add vti${proto}_a type ${vti_type} local ${veth_a_addr} remote ${veth_b_addr} key 10 || return 1
${ns_b} ip link set vti_b up ${ns_b} ip link add vti${proto}_b type ${vti_type} local ${veth_b_addr} remote ${veth_a_addr} key 10
${ns_a} ip addr add ${vti_a_addr}/${vti_mask} dev vti${proto}_a
${ns_b} ip addr add ${vti_b_addr}/${vti_mask} dev vti${proto}_b
${ns_a} ip link set vti${proto}_a up
${ns_b} ip link set vti${proto}_b up
sleep 1 sleep 1
} }
setup_vti4() {
setup_vti 4 ${veth4_a_addr} ${veth4_b_addr} ${vti4_a_addr} ${vti4_b_addr} ${vti4_mask}
}
setup_vti6() {
setup_vti 6 ${veth6_a_addr} ${veth6_b_addr} ${vti6_a_addr} ${vti6_b_addr} ${vti6_mask}
}
setup_xfrm() { setup_xfrm() {
${ns_a} ip -6 xfrm state add src ${veth6_a_addr} dst ${veth6_b_addr} spi 0x1000 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel || return 1 ${ns_a} ip -6 xfrm state add src ${veth6_a_addr} dst ${veth6_b_addr} spi 0x1000 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel || return 1
${ns_a} ip -6 xfrm state add src ${veth6_b_addr} dst ${veth6_a_addr} spi 0x1001 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel ${ns_a} ip -6 xfrm state add src ${veth6_b_addr} dst ${veth6_a_addr} spi 0x1001 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
...@@ -116,6 +150,20 @@ mtu_parse() { ...@@ -116,6 +150,20 @@ mtu_parse() {
done done
} }
link_get() {
ns_cmd="${1}"
name="${2}"
${ns_cmd} ip link show dev "${name}"
}
link_get_mtu() {
ns_cmd="${1}"
name="${2}"
mtu_parse "$(link_get "${ns_cmd}" ${name})"
}
route_get_dst_exception() { route_get_dst_exception() {
ns_cmd="${1}" ns_cmd="${1}"
dst="${2}" dst="${2}"
...@@ -137,8 +185,8 @@ test_pmtu_vti6_exception() { ...@@ -137,8 +185,8 @@ test_pmtu_vti6_exception() {
# Create route exception by exceeding link layer MTU # Create route exception by exceeding link layer MTU
mtu "${ns_a}" veth_a 4000 mtu "${ns_a}" veth_a 4000
mtu "${ns_b}" veth_b 4000 mtu "${ns_b}" veth_b 4000
mtu "${ns_a}" vti_a 5000 mtu "${ns_a}" vti6_a 5000
mtu "${ns_b}" vti_b 5000 mtu "${ns_b}" vti6_b 5000
${ns_a} ping6 -q -i 0.1 -w 2 -s 60000 ${vti6_b_addr} > /dev/null ${ns_a} ping6 -q -i 0.1 -w 2 -s 60000 ${vti6_b_addr} > /dev/null
# Check that exception was created # Check that exception was created
...@@ -148,7 +196,7 @@ test_pmtu_vti6_exception() { ...@@ -148,7 +196,7 @@ test_pmtu_vti6_exception() {
fi fi
# Decrease tunnel MTU, check for PMTU decrease in route exception # Decrease tunnel MTU, check for PMTU decrease in route exception
mtu "${ns_a}" vti_a 3000 mtu "${ns_a}" vti6_a 3000
if [ "$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})" -ne 3000 ]; then if [ "$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})" -ne 3000 ]; then
err " decreasing tunnel MTU didn't decrease route exception PMTU" err " decreasing tunnel MTU didn't decrease route exception PMTU"
...@@ -156,7 +204,7 @@ test_pmtu_vti6_exception() { ...@@ -156,7 +204,7 @@ test_pmtu_vti6_exception() {
fi fi
# Increase tunnel MTU, check for PMTU increase in route exception # Increase tunnel MTU, check for PMTU increase in route exception
mtu "${ns_a}" vti_a 9000 mtu "${ns_a}" vti6_a 9000
if [ "$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})" -ne 9000 ]; then if [ "$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})" -ne 9000 ]; then
err " increasing tunnel MTU didn't increase route exception PMTU" err " increasing tunnel MTU didn't increase route exception PMTU"
fail=1 fail=1
...@@ -165,6 +213,18 @@ test_pmtu_vti6_exception() { ...@@ -165,6 +213,18 @@ test_pmtu_vti6_exception() {
return ${fail} return ${fail}
} }
test_pmtu_vti4_default_mtu() {
setup namespaces veth vti4 || return 2
# Check that MTU of vti device is MTU of veth minus IPv4 header length
veth_mtu="$(link_get_mtu "${ns_a}" veth_a)"
vti4_mtu="$(link_get_mtu "${ns_a}" vti4_a)"
if [ $((veth_mtu - vti4_mtu)) -ne 20 ]; then
err " vti MTU ${vti4_mtu} is not veth MTU ${veth_mtu} minus IPv4 header length"
return 1
fi
}
trap cleanup EXIT trap cleanup EXIT
exitcode=0 exitcode=0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment