Skip to content

L
linux
Commit a422bd0f authored by Boojin Kim's avatar Boojin Kim Committed by Vinod Koul
Browse files
Options

ARM: S5PC100: Use generic DMA PL330 driver 

This patch makes Samsung S5PC100 to use DMA PL330 driver
on DMADEVICE. The S5PC100 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.
Signed-off-by: default avatarBoojin Kim <boojin.kim@samsung.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Acked-by: default avatarVinod Koul <vinod.koul@intel.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent dafc9543
Show whitespace changes
Inline Side-by-side
Showing with 222 additions and 116 deletions
arch/arm/mach-s5pc100/Kconfig
View file @ a422bd0f
......@@ -10,7 +10,7 @@ if ARCH_S5PC100
config CPU_S5PC100
bool
select S5P_EXT_INT
select S3C_PL330_DMA
select SAMSUNG_DMADEV
help
Enable S5PC100 CPU support
......
arch/arm/mach-s5pc100/clock.c
View file @ a422bd0f
......@@ -33,6 +33,11 @@ static struct clk s5p_clk_otgphy = {
.name = "otg_phy",
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
static struct clk *clk_src_mout_href_list[] = {
[0] = &s5p_clk_27m,
[1] = &clk_fin_hpll,
......@@ -454,13 +459,13 @@ static struct clk init_clocks_off[] = {
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
......@@ -1276,5 +1281,7 @@ void __init s5pc100_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
arch/arm/mach-s5pc100/dma.c
View file @ a422bd0f
/*
/* linux/arch/arm/mach-s5pc100/dma.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
......@@ -17,150 +21,245 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/s3c-pl330-pdata.h>
#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static struct resource s5pc100_pdma0_resource[] = {
[0] = {
.start = S5PC100_PA_PDMA0,
.end = S5PC100_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA0,
.end = IRQ_PDMA0,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri pdma0_peri[30] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = DMACH_IRDA,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_AC97_MICIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMOUT,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_EXTERNAL,
}, {
.peri_id = (u8)DMACH_PWM,
}, {
.peri_id = (u8)DMACH_SPDIF,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_HSI_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_HSI_TX,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_IRDA,
[9] = DMACH_I2S0_RX,
[10] = DMACH_I2S0_TX,
[11] = DMACH_I2S0S_TX,
[12] = DMACH_I2S1_RX,
[13] = DMACH_I2S1_TX,
[14] = DMACH_I2S2_RX,
[15] = DMACH_I2S2_TX,
[16] = DMACH_SPI0_RX,
[17] = DMACH_SPI0_TX,
[18] = DMACH_SPI1_RX,
[19] = DMACH_SPI1_TX,
[20] = DMACH_SPI2_RX,
[21] = DMACH_SPI2_TX,
[22] = DMACH_AC97_MICIN,
[23] = DMACH_AC97_PCMIN,
[24] = DMACH_AC97_PCMOUT,
[25] = DMACH_EXTERNAL,
[26] = DMACH_PWM,
[27] = DMACH_SPDIF,
[28] = DMACH_HSI_RX,
[29] = DMACH_HSI_TX,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata s5pc100_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri = pdma0_peri,
};
static struct platform_device s5pc100_device_pdma0 = {
.name = "s3c-pl330",
.id = 0,
.num_resources = ARRAY_SIZE(s5pc100_pdma0_resource),
.resource = s5pc100_pdma0_resource,
struct amba_device s5pc100_device_pdma0 = {
.dev = {
.init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma0_pdata,
},
};
static struct resource s5pc100_pdma1_resource[] = {
[0] = {
.start = S5PC100_PA_PDMA1,
.end = S5PC100_PA_PDMA1 + SZ_4K,
.res = {
.start = S5PC100_PA_PDMA0,
.end = S5PC100_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA1,
.end = IRQ_PDMA1,
.flags = IORESOURCE_IRQ,
},
.irq = {IRQ_PDMA0, NO_IRQ},
.periphid = 0x00041330,
};
static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_IRDA,
[9] = DMACH_I2S0_RX,
[10] = DMACH_I2S0_TX,
[11] = DMACH_I2S0S_TX,
[12] = DMACH_I2S1_RX,
[13] = DMACH_I2S1_TX,
[14] = DMACH_I2S2_RX,
[15] = DMACH_I2S2_TX,
[16] = DMACH_SPI0_RX,
[17] = DMACH_SPI0_TX,
[18] = DMACH_SPI1_RX,
[19] = DMACH_SPI1_TX,
[20] = DMACH_SPI2_RX,
[21] = DMACH_SPI2_TX,
[22] = DMACH_PCM0_RX,
[23] = DMACH_PCM0_TX,
[24] = DMACH_PCM1_RX,
[25] = DMACH_PCM1_TX,
[26] = DMACH_MSM_REQ0,
[27] = DMACH_MSM_REQ1,
[28] = DMACH_MSM_REQ2,
[29] = DMACH_MSM_REQ3,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
struct dma_pl330_peri pdma1_peri[30] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = DMACH_IRDA,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MSM_REQ0,
}, {
.peri_id = (u8)DMACH_MSM_REQ1,
}, {
.peri_id = (u8)DMACH_MSM_REQ2,
}, {
.peri_id = (u8)DMACH_MSM_REQ3,
},
};
static struct platform_device s5pc100_device_pdma1 = {
.name = "s3c-pl330",
.id = 1,
.num_resources = ARRAY_SIZE(s5pc100_pdma1_resource),
.resource = s5pc100_pdma1_resource,
struct dma_pl330_platdata s5pc100_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri = pdma1_peri,
};
struct amba_device s5pc100_device_pdma1 = {
.dev = {
.init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma1_pdata,
},
};
static struct platform_device *s5pc100_dmacs[] __initdata = {
&s5pc100_device_pdma0,
&s5pc100_device_pdma1,
.res = {
.start = S5PC100_PA_PDMA1,
.end = S5PC100_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA1, NO_IRQ},
.periphid = 0x00041330,
};
static int __init s5pc100_dma_init(void)
{
platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
return 0;
}
......
arch/arm/mach-s5pc100/include/mach/dma.h
View file @ a422bd0f
......@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
/* This platform uses the common S3C DMA API driver for PL330 */
/* This platform uses the common DMA API driver for PL330 */
#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7