Commit a6c8056d authored by Tero Kristo's avatar Tero Kristo Committed by Tony Lindgren

ARM: dts: omap5: convert IOMMUs to use ti-sysc

Convert omap5 IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 22f8d664
......@@ -349,7 +349,6 @@ usbhsehci: ehci@c00 {
target-module@66000 { /* 0x4a066000, ap 23 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmu_dsp";
reg = <0x66000 0x4>,
<0x66010 0x4>,
<0x66014 0x4>;
......@@ -364,12 +363,18 @@ SYSC_OMAP2_SOFTRESET |
/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
clock-names = "fck";
resets = <&prm_dsp 1>;
reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x66000 0x1000>;
/* mmu_dsp cannot be moved before reset driver */
status = "disabled";
mmu_dsp: mmu@0 {
compatible = "ti,omap4-iommu";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <0>;
};
};
target-module@70000 { /* 0x4a070000, ap 79 2e.0 */
......
......@@ -186,22 +186,34 @@ gpmc: gpmc@50000000 {
#gpio-cells = <2>;
};
mmu_dsp: mmu@4a066000 {
compatible = "ti,omap4-iommu";
reg = <0x4a066000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_dsp";
#iommu-cells = <0>;
};
target-module@55082000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x55082000 0x4>,
<0x55082010 0x4>,
<0x55082014 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
clock-names = "fck";
resets = <&prm_core 2>;
reset-names = "rstctrl";
ranges = <0x0 0x55082000 0x100>;
#size-cells = <1>;
#address-cells = <1>;
mmu_ipu: mmu@55082000 {
mmu_ipu: mmu@0 {
compatible = "ti,omap4-iommu";
reg = <0x55082000 0x100>;
reg = <0x0 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
};
};
dmm@4e000000 {
compatible = "ti,omap5-dmm";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment