Commit a8823143 authored by Tony Lindgren's avatar Tony Lindgren

ARM: OMAP2: Fix cpu detection

At some point omap2 changed the bits for GET_OMAP_CLASS, which
broke 15xx detection on 730 as noticed by Russell King.

This patch fixes omap2 cpu detection to respect the original
GET_OMAP_CLASS, and simplifies the detection for 34xx.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 5ba02dca
...@@ -178,9 +178,6 @@ void __init omap_check_revision(void) ...@@ -178,9 +178,6 @@ void __init omap_check_revision(void)
case 0x17: case 0x17:
system_rev |= 0x16; system_rev |= 0x16;
break; break;
case 0x24:
system_rev |= 0x24;
break;
default: default:
printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type); printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
} }
......
...@@ -475,7 +475,7 @@ int __init omap2_clk_init(void) ...@@ -475,7 +475,7 @@ int __init omap2_clk_init(void)
* Update this if there are further clock changes between ES2 * Update this if there are further clock changes between ES2
* and production parts * and production parts
*/ */
if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0)) { if (system_rev == OMAP3430_REV_ES1_0) {
/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
cpu_clkflg |= CLOCK_IN_OMAP3430ES1; cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
} else { } else {
......
...@@ -22,39 +22,6 @@ ...@@ -22,39 +22,6 @@
#include <mach/control.h> #include <mach/control.h>
#include <mach/cpu.h> #include <mach/cpu.h>
static u32 class;
static void __iomem *tap_base;
static u16 tap_prod_id;
#define OMAP_TAP_IDCODE 0x0204
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
#define OMAP_TAP_DIE_ID_2 0x0220
#define OMAP_TAP_DIE_ID_3 0x0224
/* system_rev fields for OMAP2 processors:
* CPU id bits [31:16],
* CPU device type [15:12], (unprg,normal,POP)
* CPU revision [11:08]
* CPU class bits [07:00]
*/
struct omap_id {
u16 hawkeye; /* Silicon type (Hawkeye id) */
u8 dev; /* Device type from production_id reg */
u32 type; /* combined type id copied to system_rev */
};
/* Register values to detect the OMAP version */
static struct omap_id omap_ids[] __initdata = {
{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 },
{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 },
{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 },
{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 },
{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 },
{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
};
static struct omap_chip_id omap_chip; static struct omap_chip_id omap_chip;
/** /**
...@@ -70,135 +37,41 @@ int omap_chip_is(struct omap_chip_id oci) ...@@ -70,135 +37,41 @@ int omap_chip_is(struct omap_chip_id oci)
} }
EXPORT_SYMBOL(omap_chip_is); EXPORT_SYMBOL(omap_chip_is);
static u32 __init read_tap_reg(int reg) /*----------------------------------------------------------------------------*/
{
unsigned int regval = 0;
u32 cpuid;
/* Reading the IDCODE register on 3430 ES1 results in a
* data abort as the register is not exposed on the OCP
* Hence reading the Cortex Rev
*/
cpuid = read_cpuid(CPUID_ID);
/* If the processor type is Cortex-A8 and the revision is 0x0
* it means its Cortex r0p0 which is 3430 ES1
*/
if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
if (reg == tap_prod_id) {
regval = 0x000F00F0;
goto out;
}
switch (reg) { #define OMAP_TAP_IDCODE 0x0204
case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break; #define OMAP_TAP_DIE_ID_0 0x0218
/* Making DevType as 0xF in ES1 to differ from ES2 */ #define OMAP_TAP_DIE_ID_1 0x021C
case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break; #define OMAP_TAP_DIE_ID_2 0x0220
case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break; #define OMAP_TAP_DIE_ID_3 0x0224
case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break;
case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break;
}
} else
regval = __raw_readl(tap_base + reg);
out:
return regval;
}
/*
* _set_system_rev - set the system_rev global based on current OMAP chip type
*
* Set the system_rev global. This is primarily used by the cpu_is_omapxxxx()
* macros.
*/
static void __init _set_system_rev(u32 type, u8 rev)
{
u32 i, ctrl_status;
/*
* system_rev encoding is as follows
* system_rev & 0xff000000 -> Omap Class (24xx/34xx)
* system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
* system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
* system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
* system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
* system_rev & 0x000000c0 -> IDCODE revision[6:7]
* system_rev & 0x0000003f -> sys_boot[0:5]
*/
/* Embedding the ES revision info in type field */
system_rev = type;
/* Also add IDCODE revision info only two lower bits */
system_rev |= ((rev & 0x3) << 6);
/* Add in the device type and sys_boot fields (see above) */
if (cpu_is_omap24xx()) {
i = OMAP24XX_CONTROL_STATUS;
} else if (cpu_is_omap343x()) {
i = OMAP343X_CONTROL_STATUS;
} else {
printk(KERN_ERR "id: unknown CPU type\n");
BUG();
}
ctrl_status = omap_ctrl_readl(i);
system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
OMAP2_SYSBOOT_4_MASK |
OMAP2_SYSBOOT_3_MASK |
OMAP2_SYSBOOT_2_MASK |
OMAP2_SYSBOOT_1_MASK |
OMAP2_SYSBOOT_0_MASK));
system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
}
/*
* _set_omap_chip - set the omap_chip global based on OMAP chip type
*
* Build the omap_chip bits. This variable is used by powerdomain and
* clockdomain code to indicate whether structures are applicable for
* the current OMAP chip type by ANDing it against a 'platform' bitfield
* in the structure.
*/
static void __init _set_omap_chip(void)
{
if (cpu_is_omap343x()) {
omap_chip.oc = CHIP_IS_OMAP3430;
if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
} else if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */ #define read_tap_reg(reg) __raw_readl(tap_base + (reg))
omap_chip.oc |= CHIP_IS_OMAP2420;
} else { struct omap_id {
u16 hawkeye; /* Silicon type (Hawkeye id) */
/* Current CPU not supported by this code. */ u8 dev; /* Device type from production_id reg */
printk(KERN_WARNING "OMAP chip type code does not yet support " u32 type; /* Combined type id copied to system_rev */
"this CPU type.\n"); };
WARN_ON(1);
} /* Register values to detect the OMAP version */
static struct omap_id omap_ids[] __initdata = {
{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
};
} static void __iomem *tap_base;
static u16 tap_prod_id;
void __init omap24xx_check_revision(void) void __init omap24xx_check_revision(void)
{ {
int i, j; int i, j;
u32 idcode; u32 idcode, prod_id;
u32 prod_id;
u16 hawkeye; u16 hawkeye;
u8 dev_type; u8 dev_type, rev;
u8 rev;
idcode = read_tap_reg(OMAP_TAP_IDCODE); idcode = read_tap_reg(OMAP_TAP_IDCODE);
prod_id = read_tap_reg(tap_prod_id); prod_id = read_tap_reg(tap_prod_id);
...@@ -220,18 +93,6 @@ void __init omap24xx_check_revision(void) ...@@ -220,18 +93,6 @@ void __init omap24xx_check_revision(void)
pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n", pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
prod_id, dev_type); prod_id, dev_type);
/*
* Detection for 34xx ES2.0 and above can be done with just
* hawkeye and rev. See TRM 1.5.2 Device Identification.
* Note that rev cannot be used directly as ES1.0 uses value 0.
*/
if (hawkeye == 0xb7ae) {
system_rev = 0x34300000 | ((1 + rev) << 12);
pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
_set_omap_chip();
return;
}
/* Check hawkeye ids */ /* Check hawkeye ids */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
if (hawkeye == omap_ids[i].hawkeye) if (hawkeye == omap_ids[i].hawkeye)
...@@ -255,28 +116,115 @@ void __init omap24xx_check_revision(void) ...@@ -255,28 +116,115 @@ void __init omap24xx_check_revision(void)
j = i; j = i;
} }
_set_system_rev(omap_ids[j].type, rev);
_set_omap_chip();
pr_info("OMAP%04x", system_rev >> 16); pr_info("OMAP%04x", system_rev >> 16);
if ((system_rev >> 8) & 0x0f) if ((system_rev >> 8) & 0x0f)
pr_info("ES%x", (system_rev >> 12) & 0xf); pr_info("ES%x", (system_rev >> 12) & 0xf);
pr_info("\n"); pr_info("\n");
}
void __init omap34xx_check_revision(void)
{
u32 cpuid, idcode;
u16 hawkeye;
u8 rev;
char *rev_name = "ES1.0";
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
* it means its Cortex r0p0 which is 3430 ES1.0.
*/
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
system_rev = OMAP3430_REV_ES1_0;
goto out;
}
/*
* Detection for 34xx ES2.0 and above can be done with just
* hawkeye and rev. See TRM 1.5.2 Device Identification.
* Note that rev does not map directly to our defined processor
* revision numbers as ES1.0 uses value 0.
*/
idcode = read_tap_reg(OMAP_TAP_IDCODE);
hawkeye = (idcode >> 12) & 0xffff;
rev = (idcode >> 28) & 0xff;
if (hawkeye == 0xb7ae) {
switch (rev) {
case 0:
system_rev = OMAP3430_REV_ES2_0;
rev_name = "ES2.0";
break;
case 2:
system_rev = OMAP3430_REV_ES2_1;
rev_name = "ES2.1";
break;
case 3:
system_rev = OMAP3430_REV_ES3_0;
rev_name = "ES3.0";
break;
default:
/* Use the latest known revision as default */
system_rev = OMAP3430_REV_ES3_0;
rev_name = "Unknown revision\n";
}
}
out:
pr_info("OMAP%04x %s\n", system_rev >> 16, rev_name);
} }
/*
* Try to detect the exact revision of the omap we're running on
*/
void __init omap2_check_revision(void) void __init omap2_check_revision(void)
{ {
/*
* At this point we have an idea about the processor revision set
* earlier with omap2_set_globals_tap().
*/
if (cpu_is_omap24xx())
omap24xx_check_revision(); omap24xx_check_revision();
else if (cpu_is_omap34xx())
omap34xx_check_revision();
else
pr_err("OMAP revision unknown, please fix!\n");
/*
* OK, now we know the exact revision. Initialize omap_chip bits
* for powerdowmain and clockdomain code.
*/
if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
} else if (cpu_is_omap343x()) {
omap_chip.oc = CHIP_IS_OMAP3430;
if (system_rev == OMAP3430_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
else if (system_rev > OMAP3430_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
} else {
pr_err("Uninitialized omap_chip, please fix!\n");
}
} }
/*
* Set up things for map_io and processor detection later on. Gets called
* pretty much first thing from board init. For multi-omap, this gets
* cpu_is_omapxxxx() working accurately enough for map_io. Then we'll try to
* detect the exact revision later on in omap2_detect_revision() once map_io
* is done.
*/
void __init omap2_set_globals_tap(struct omap_globals *omap2_globals) void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
{ {
class = omap2_globals->class; system_rev = omap2_globals->class;
tap_base = omap2_globals->tap; tap_base = omap2_globals->tap;
if (class == 0x3430) if (cpu_is_omap34xx())
tap_prod_id = 0x0210; tap_prod_id = 0x0210;
else else
tap_prod_id = 0x0208; tap_prod_id = 0x0208;
......
...@@ -28,14 +28,19 @@ ...@@ -28,14 +28,19 @@
struct omap_chip_id { struct omap_chip_id {
u8 oc; u8 oc;
u8 type;
}; };
#define OMAP_CHIP_INIT(x) { .oc = x } #define OMAP_CHIP_INIT(x) { .oc = x }
/*
* system_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
* CPU revision (See _REV_ defined in cpu.h) [15:08]
* CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
*/
extern unsigned int system_rev; extern unsigned int system_rev;
#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f)
/* /*
* Test if multicore OMAP support is needed * Test if multicore OMAP support is needed
*/ */
...@@ -108,7 +113,7 @@ extern unsigned int system_rev; ...@@ -108,7 +113,7 @@ extern unsigned int system_rev;
* cpu_is_omap243x(): True for OMAP2430 * cpu_is_omap243x(): True for OMAP2430
* cpu_is_omap343x(): True for OMAP3430 * cpu_is_omap343x(): True for OMAP3430
*/ */
#define GET_OMAP_CLASS ((system_rev >> 24) & 0xff) #define GET_OMAP_CLASS (system_rev & 0xff)
#define IS_OMAP_CLASS(class, id) \ #define IS_OMAP_CLASS(class, id) \
static inline int is_omap ##class (void) \ static inline int is_omap ##class (void) \
...@@ -320,44 +325,20 @@ IS_OMAP_TYPE(3430, 0x3430) ...@@ -320,44 +325,20 @@ IS_OMAP_TYPE(3430, 0x3430)
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
/*
* Macros to detect silicon revision of OMAP2/3 processors.
* is_sil_rev_greater_than: true if passed cpu type & its rev is greater.
* is_sil_rev_lesser_than: true if passed cpu type & its rev is lesser.
* is_sil_rev_equal_to: true if passed cpu type & its rev is equal.
* get_sil_rev: return the silicon rev value.
*/
#define get_sil_omap_type(rev) ((rev & 0xffff0000) >> 16)
#define get_sil_revision(rev) ((rev & 0x0000f000) >> 12)
#define is_sil_rev_greater_than(rev) \ /* Various silicon revisions for omap2 */
((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ #define OMAP242X_CLASS 0x24200024
(get_sil_revision(system_rev) > get_sil_revision(rev))) #define OMAP2420_REV_ES1_0 0x24200024
#define OMAP2420_REV_ES2_0 0x24201024
#define is_sil_rev_less_than(rev) \ #define OMAP243X_CLASS 0x24300024
((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ #define OMAP2430_REV_ES1_0 0x24300024
(get_sil_revision(system_rev) < get_sil_revision(rev)))
#define is_sil_rev_equal_to(rev) \ #define OMAP343X_CLASS 0x34300034
((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ #define OMAP3430_REV_ES1_0 0x34300034
(get_sil_revision(system_rev) == get_sil_revision(rev))) #define OMAP3430_REV_ES2_0 0x34301034
#define OMAP3430_REV_ES2_1 0x34302034
#define get_sil_rev() \ #define OMAP3430_REV_ES3_0 0x34303034
get_sil_revision(system_rev)
/* Various silicon macros defined here */
#define OMAP242X_CLASS 0x24200000
#define OMAP2420_REV_ES1_0 0x24200000
#define OMAP2420_REV_ES2_0 0x24201000
#define OMAP243X_CLASS 0x24300000
#define OMAP2430_REV_ES1_0 0x24300000
#define OMAP343X_CLASS 0x34300000
#define OMAP3430_REV_ES1_0 0x34300000
#define OMAP3430_REV_ES2_0 0x34301000
#define OMAP3430_REV_ES2_1 0x34302000
#define OMAP3430_REV_ES2_2 0x34303000
/* /*
* omap_chip bits * omap_chip bits
...@@ -382,23 +363,16 @@ IS_OMAP_TYPE(3430, 0x3430) ...@@ -382,23 +363,16 @@ IS_OMAP_TYPE(3430, 0x3430)
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
int omap_chip_is(struct omap_chip_id oci); int omap_chip_is(struct omap_chip_id oci);
int omap_type(void);
/* /*
* Macro to detect device type i.e. EMU/HS/TST/GP/BAD * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
*/ */
#define DEVICE_TYPE_TEST 0 #define OMAP2_DEVICE_TYPE_TEST 0
#define DEVICE_TYPE_EMU 1 #define OMAP2_DEVICE_TYPE_EMU 1
#define DEVICE_TYPE_SEC 2 #define OMAP2_DEVICE_TYPE_SEC 2
#define DEVICE_TYPE_GP 3 #define OMAP2_DEVICE_TYPE_GP 3
#define DEVICE_TYPE_BAD 4 #define OMAP2_DEVICE_TYPE_BAD 4
#define get_device_type() ((system_rev & 0x700) >> 8)
#define is_device_type_test() (get_device_type() == DEVICE_TYPE_TEST)
#define is_device_type_emu() (get_device_type() == DEVICE_TYPE_EMU)
#define is_device_type_sec() (get_device_type() == DEVICE_TYPE_SEC)
#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP)
#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD)
void omap2_check_revision(void); void omap2_check_revision(void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment