drm/i915: fix overlay on i830M

The overlay on the i830M has a peculiar failure mode: It works the
first time around after boot-up, but consistenly hangs the second time
it's used.

Chris Wilson has dug out a nice errata:

"1.5.12 Clock Gating Disable for Display Register
Address Offset:	06200h–06203h

"Bit 3
Ovrunit Clock Gating Disable.
0 = Clock gating controlled by unit enabling logic
1 = Disable clock gating function
DevALM Errata ALM049: Overlay Clock Gating Must be Disabled:  Overlay
& L2 Cache clock gating must be disabled in order to prevent device
hangs when turning off overlay.SW must turn off Ovrunit clock gating
(6200h) and L2 Cache clock gating (C8h)."

Now I've nowhere found that 0xc8 register and hence couldn't apply the
l2 cache workaround. But I've remembered that part of the magic that
the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache
allocations so that the overlay scaler has some scratch space.

And while pondering how that could explain the hang the 2nd time we
enable the overlay, I've remembered that the old ums overlay code did
_not_ issue the OVERLAY_OFF cmd.

And indeed, disabling the OFF cmd results in the overlay working
flawlessly, so I guess we can workaround the lack of the above
workaround by simply never disabling the overlay engine once it's
enabled.

Note that we have the first part of the above w/a already implemented
in i830_init_clock_gating - leave that as-is to avoid surprises.

v2: Add a comment in the code.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827
Cc: stable@vger.kernel.org
Tested-by: Rhys <rhyspuk@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_overlay.c

@@ -341,9 +341,17 @@ static int intel_overlay_off(struct intel_overlay *overlay)
 	intel_ring_emit(ring, flip_addr);
 	intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
 	/* turn overlay off */
+	if (IS_I830(dev)) {
+		/* Workaround: Don't disable the overlay fully, since otherwise
+		 * it dies on the next OVERLAY_ON cmd. */
+		intel_ring_emit(ring, MI_NOOP);
+		intel_ring_emit(ring, MI_NOOP);
+		intel_ring_emit(ring, MI_NOOP);
+	} else {
 		intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
 		intel_ring_emit(ring, flip_addr);
 		intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+	}
 	intel_ring_advance(ring);
 
 	return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail);