net/mlx5e: kTLS, Fix progress params context WQE layout

The TLS progress params context WQE should not include an
Eth segment, drop it.
In addition, align the tls_progress_params layout with the
HW specification document:
- fix the tisn field name.
- remove the valid bit.

Fixes: a12ff35e ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Fixes: d2ead1f3 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/en.h

@@ -184,8 +184,13 @@ static inline int mlx5e_get_max_num_channels(struct mlx5_core_dev *mdev)
 
 struct mlx5e_tx_wqe {
 	struct mlx5_wqe_ctrl_seg ctrl;
+	union {
+		struct {
 			struct mlx5_wqe_eth_seg  eth;
 			struct mlx5_wqe_data_seg data[0];
+		};
+		u8 tls_progress_params_ctx[0];
+	};
 };
 
 struct mlx5e_rx_wqe_ll {

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.h

@@ -11,12 +11,14 @@
 #include "accel/tls.h"
 
 #define MLX5E_KTLS_STATIC_UMR_WQE_SZ \
-	(sizeof(struct mlx5e_umr_wqe) + MLX5_ST_SZ_BYTES(tls_static_params))
+	(offsetof(struct mlx5e_umr_wqe, tls_static_params_ctx) + \
+	 MLX5_ST_SZ_BYTES(tls_static_params))
 #define MLX5E_KTLS_STATIC_WQEBBS \
 	(DIV_ROUND_UP(MLX5E_KTLS_STATIC_UMR_WQE_SZ, MLX5_SEND_WQE_BB))
 
 #define MLX5E_KTLS_PROGRESS_WQE_SZ \
-	(sizeof(struct mlx5e_tx_wqe) + MLX5_ST_SZ_BYTES(tls_progress_params))
+	(offsetof(struct mlx5e_tx_wqe, tls_progress_params_ctx) + \
+	 MLX5_ST_SZ_BYTES(tls_progress_params))
 #define MLX5E_KTLS_PROGRESS_WQEBBS \
 	(DIV_ROUND_UP(MLX5E_KTLS_PROGRESS_WQE_SZ, MLX5_SEND_WQE_BB))
 #define MLX5E_KTLS_MAX_DUMP_WQEBBS 2

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c

@@ -80,7 +80,7 @@ build_static_params(struct mlx5e_umr_wqe *wqe, u16 pc, u32 sqn,
 static void
 fill_progress_params_ctx(void *ctx, struct mlx5e_ktls_offload_context_tx *priv_tx)
 {
-	MLX5_SET(tls_progress_params, ctx, pd, priv_tx->tisn);
+	MLX5_SET(tls_progress_params, ctx, tisn, priv_tx->tisn);
 	MLX5_SET(tls_progress_params, ctx, record_tracker_state,
 		 MLX5E_TLS_PROGRESS_PARAMS_RECORD_TRACKER_STATE_START);
 	MLX5_SET(tls_progress_params, ctx, auth_state,
@@ -104,7 +104,7 @@ build_progress_params(struct mlx5e_tx_wqe *wqe, u16 pc, u32 sqn,
 					     PROGRESS_PARAMS_DS_CNT);
 	cseg->fm_ce_se         = fence ? MLX5_FENCE_MODE_INITIATOR_SMALL : 0;
 
-	fill_progress_params_ctx(wqe->data, priv_tx);
+	fill_progress_params_ctx(wqe->tls_progress_params_ctx, priv_tx);
 }
 
 static void tx_fill_wi(struct mlx5e_txqsq *sq,

include/linux/mlx5/mlx5_ifc.h

@@ -10054,9 +10054,8 @@ struct mlx5_ifc_tls_static_params_bits {
 };
 
 struct mlx5_ifc_tls_progress_params_bits {
-	u8         valid[0x1];
-	u8         reserved_at_1[0x7];
-	u8         pd[0x18];
+	u8         reserved_at_0[0x8];
+	u8         tisn[0x18];
 
 	u8         next_record_tcp_sn[0x20];