Commit aa25e446 authored by Rob Herring's avatar Rob Herring

dt-bindings: usb: add #phy-cells to usb-nop-xceiv

Consumers of usb-nop-xceiv use the phy binding, but #phy-cells is missing
from the binding. This is probably because this binding predates the
common phy binding. So add #phy-cells as a required property. This should
not break any users as missing should be treated as 0 cells.
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 27e8524d
......@@ -2,6 +2,7 @@ USB NOP PHY
Required properties:
- compatible: should be usb-nop-xceiv
- #phy-cells: Must be 0
Optional properties:
- clocks: phandle to the PHY clock. Use as per Documentation/devicetree
......@@ -33,6 +34,7 @@ Example:
reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
vbus-regulator = <&vbus_regulator>;
#phy-cells = <0>;
};
hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment