can: flexcan: Ack wakeup interrupt separately

As FLEXCAN_ESR_ALL_INT is for all bus errors and state change IRQ
sources, strictly speaking FLEXCAN_ESR_WAK_INT does not belong to these.
So add wakeup interrupt ack separately to existing ack of the
interrupts.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20191204113249.3381-3-qiangqing.zhang@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/flexcan.c

@@ -134,8 +134,7 @@
 	(FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)
 #define FLEXCAN_ESR_ALL_INT \
 	(FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | \
-	 FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT | \
-	 FLEXCAN_ESR_WAK_INT)
+	 FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
 
 /* FLEXCAN interrupt flag register (IFLAG) bits */
 /* Errata ERR005829 step7: Reserve first valid MB */
@@ -979,10 +978,10 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 
 	reg_esr = priv->read(&regs->esr);
 
-	/* ACK all bus error and state change IRQ sources */
-	if (reg_esr & FLEXCAN_ESR_ALL_INT) {
+	/* ACK all bus error, state change and wake IRQ sources */
+	if (reg_esr & (FLEXCAN_ESR_ALL_INT | FLEXCAN_ESR_WAK_INT)) {
 		handled = IRQ_HANDLED;
-		priv->write(reg_esr & FLEXCAN_ESR_ALL_INT, &regs->esr);
+		priv->write(reg_esr & (FLEXCAN_ESR_ALL_INT | FLEXCAN_ESR_WAK_INT), &regs->esr);
 	}
 
 	/* state change interrupt or broken error state quirk fix is enabled */