Merge tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFS updates from Samuel Ortiz:
 "This is the MFD pull request for the 3.9 merge window.

  No new drivers this time, but a bunch of fairly big cleanups:

   - Roger Quadros worked on a OMAP USBHS and TLL platform data
     consolidation, OMAP5 support and clock management code cleanup.

   - The first step of a major sync for the ab8500 driver from Lee
     Jones.  In particular, the debugfs and the sysct interfaces got
     extended and improved.

   - Peter Ujfalusi sent a nice patchset for cleaning and fixing the
     twl-core driver, with a much needed module id lookup code
     improvement.

   - The regular wm5102 and arizona cleanups and fixes from Mark Brown.

   - Laxman Dewangan extended the palmas APIs in order to implement the
     palmas GPIO and rt drivers.

   - Laxman also added DT support for the tps65090 driver.

   - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra
     and Darren Hart.

   - Linus Walleij patchset for the ab8500 driver allowed ab8500 and
     ab9540 based devices to switch to the new abx500 pin-ctrl driver.

   - The max8925 now has device tree and irqdomain support thanks to
     Qing Xu.

   - The recently added rtsx driver got a few cleanups and fixes for a
     better card detection code path and now also supports the RTS5227
     chipset, thanks to Wei Wang and Roger Tseng."

* tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits)
  mfd: lpc_ich: Use devres API to allocate private data
  mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH
  mfd: lpc_sch: Accomodate partial population of the MFD devices
  mfd: da9052-i2c: Staticize da9052_i2c_fix()
  mfd: syscon: Fix sparse warning
  mfd: twl-core: Fix kernel panic on boot
  mfd: rtsx: Fix issue that booting OS with SD card inserted
  mfd: ab8500: Fix compile error
  mfd: Add missing GENERIC_HARDIRQS dependecies
  Documentation: Add docs for max8925 dt
  mfd: max8925: Add dts
  mfd: max8925: Support dt for backlight
  mfd: max8925: Fix onkey driver irq base
  mfd: max8925: Fix mfd device register failure
  mfd: max8925: Add irqdomain for dt
  mfd: vexpress: Allow vexpress-sysreg to self-initialise
  mfd: rtsx: Support RTS5227
  mfd: rtsx: Implement driving adjustment to device-dependent callbacks
  mfd: vexpress: Add pseudo-GPIO based LEDs
  mfd: ab8500: Rename ab8500 to abx500 for hwmon driver
  ...

Documentation/devicetree/bindings/mfd/max8925.txt

+* Maxim max8925 Power Management IC
+
+Required parent device properties:
+- compatible : "maxim,max8925"
+- reg : the I2C slave address for the max8925 chip
+- interrupts : IRQ line for the max8925 chip
+- interrupt-controller: describes the max8925 as an interrupt
+  controller (has its own domain)
+- #interrupt-cells : should be 1.
+	- The cell is the max8925 local IRQ number
+
+Optional parent device properties:
+- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in
+  interrupts property, the other is indicated here.
+
+max8925 consists of a large and varied group of sub-devices:
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+max8925-onkey		:		: On key
+max8925-rtc		:		: RTC
+max8925-regulator	:		: Regulators
+max8925-backlight	:		: Backlight
+max8925-touch		:		: Touchscreen
+max8925-power		:		: Charger
+
+Example:
+
+	pmic: max8925@3c {
+		compatible = "maxim,max8925";
+		reg = <0x3c>;
+		interrupts = <1>;
+		interrupt-parent = <&intcmux4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		maxim,tsc-irq = <0>;
+
+		regulators {
+			SDV1 {
+				regulator-min-microvolt = <637500>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+		};
+		backlight {
+			maxim,max8925-dual-string = <0>;
+		};
+		charger {
+			batt-detect = <0>;
+			topoff-threshold = <1>;
+			fast-charge = <7>;
+			no-temp-support = <0>;
+			no-insert-detect = <0>;
+		};
+	};

Documentation/devicetree/bindings/power_supply/max8925_batter.txt

+max8925-battery bindings
+~~~~~~~~~~~~~~~~
+
+Optional properties :
+ - batt-detect: whether support battery detect
+ - topoff-threshold: set charging current in topoff mode
+ - fast-charge: set charging current in fast mode
+ - no-temp-support: whether support temperature protection detect
+ - no-insert-detect: whether support insert detect
+
+Example:
+	charger {
+		batt-detect = <0>;
+		topoff-threshold = <1>;
+		fast-charge = <7>;
+		no-temp-support = <0>;
+		no-insert-detect = <0>;
+	};

Documentation/devicetree/bindings/regulator/tps65090.txt

+TPS65090 regulators
+
+Required properties:
+- compatible: "ti,tps65090"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
+- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
+- infet[1-7]-supply: The input supply for FET[1-7] respectively.
+- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
+
+Optional properties:
+- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
+  If DCDCs are externally controlled then this property should be there.
+- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+  If DCDCs are externally controlled and if it is from GPIO then GPIO
+  number should be provided. If it is externally controlled and no GPIO
+  entry then driver will just configure this rails as external control
+  and will not provide any enable/disable APIs.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65090@48 {
+		compatible = "ti,tps65090";
+		reg = <0x48>;
+		interrupts = <0 88 0x4>;
+
+		vsys1-supply = <&some_reg>;
+		vsys2-supply = <&some_reg>;
+		vsys3-supply = <&some_reg>;
+		infet1-supply = <&some_reg>;
+		infet2-supply = <&some_reg>;
+		infet3-supply = <&some_reg>;
+		infet4-supply = <&some_reg>;
+		infet5-supply = <&some_reg>;
+		infet6-supply = <&some_reg>;
+		infet7-supply = <&some_reg>;
+		vsys_l1-supply = <&some_reg>;
+		vsys_l2-supply = <&some_reg>;
+
+		regulators {
+			dcdc1 {
+				regulator-name = "dcdc1";
+				regulator-boot-on;
+				regulator-always-on;
+				ti,enable-ext-control;
+				dcdc-ext-control-gpios = <&gpio 10 0>;
+			};
+
+			dcdc2 {
+				regulator-name = "dcdc2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc3 {
+				regulator-name = "dcdc3";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet1 {
+				regulator-name = "fet1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet2 {
+				regulator-name = "fet2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet3 {
+				regulator-name = "fet3";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet4 {
+				regulator-name = "fet4";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet5 {
+				regulator-name = "fet5";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet6 {
+				regulator-name = "fet6";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet7 {
+				regulator-name = "fet7";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};

Documentation/devicetree/bindings/video/backlight/max8925-backlight.txt

+88pm860x-backlight bindings
+
+Optional properties:
+  - maxim,max8925-dual-string: whether support dual string
+
+Example:
+
+	backlights {
+		maxim,max8925-dual-string = <0>;
+	};

arch/arm/boot/dts/mmp2-brownstone.dts

@@ -29,6 +29,164 @@ uart3: uart@d4018000 {
 			};
 			twsi1: i2c@d4011000 {
 				status = "okay";
+				pmic: max8925@3c {
+					compatible = "maxium,max8925";
+					reg = <0x3c>;
+					interrupts = <1>;
+					interrupt-parent = <&intcmux4>;
+					interrupt-controller;
+					#interrupt-cells = <1>;
+					maxim,tsc-irq = <0>;
+
+					regulators {
+						SDV1 {
+							regulator-min-microvolt = <637500>;
+							regulator-max-microvolt = <1425000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						SDV2 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2225000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						SDV3 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO1 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO2 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2250000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO3 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2250000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO4 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO5 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO6 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO7 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO8 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO9 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO10 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+						};
+						LDO11 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO12 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO13 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO14 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO15 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO16 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO17 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2250000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO18 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2250000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO19 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO20 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+					};
+					backlight {
+						maxim,max8925-dual-string = <0>;
+					};
+					charger {
+						batt-detect = <0>;
+						topoff-threshold = <1>;
+						fast-charge = <7>;
+						no-temp-support = <0>;
+						no-insert-detect = <0>;
+					};
+				};
 			};
 			rtc: rtc@d4010000 {
 				status = "okay";

arch/arm/boot/dts/mmp2.dtsi

@@ -46,7 +46,7 @@ intc: interrupt-controller@d4282000 {
 				mrvl,intc-nr-irqs = <64>;
 			};
 
-			intcmux4@d4282150 {
+			intcmux4: interrupt-controller@d4282150 {
 				compatible = "mrvl,mmp2-mux-intc";
 				interrupts = <4>;
 				interrupt-controller;
@@ -201,6 +201,8 @@ twsi1: i2c@d4011000 {
 				compatible = "mrvl,mmp-twsi";
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				mrvl,i2c-fast-mode;
 				status = "disabled";
 			};

arch/arm/mach-omap2/board-zoom-display.c

@@ -49,13 +49,13 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
 }
 
-/*
- * PWMA/B register offsets (TWL4030_MODULE_PWMA)
- */
+/* Register offsets in TWL4030_MODULE_INTBR */
 #define TWL_INTBR_PMBR1	0xD
 #define TWL_INTBR_GPBR1	0xC
-#define TWL_LED_PWMON	0x0
-#define TWL_LED_PWMOFF	0x1
+
+/* Register offsets in TWL_MODULE_PWM */
+#define TWL_LED_PWMON	0x3
+#define TWL_LED_PWMOFF	0x4
 
 static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
 {
@@ -93,8 +93,8 @@ static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
 	}
 
 	c = ((50 * (100 - level)) / 100) + 1;
-	twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF);
-	twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON);
+	twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF);
+	twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON);
 #else
 	pr_warn("Backlight not enabled\n");
 #endif

drivers/gpio/Kconfig

@@ -657,6 +657,13 @@ config GPIO_JANZ_TTL
 	  This driver provides support for driving the pins in output
 	  mode only. Input mode is not supported.
 
+config GPIO_PALMAS
+	bool "TI PALMAS series PMICs GPIO"
+	depends on MFD_PALMAS
+	help
+	  Select this option to enable GPIO driver for the TI PALMAS
+	  series chip family.
+
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X

drivers/gpio/Makefile

@@ -68,6 +68,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
 obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
+obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
 obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o

drivers/gpio/gpio-palmas.c

+/*
+ * TI Palma series PMIC's GPIO driver.
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/palmas.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+struct palmas_gpio {
+	struct gpio_chip gpio_chip;
+	struct palmas *palmas;
+};
+
+static inline struct palmas_gpio *to_palmas_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct palmas_gpio, gpio_chip);
+}
+
+static int palmas_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct palmas_gpio *pg = to_palmas_gpio(gc);
+	struct palmas *palmas = pg->palmas;
+	unsigned int val;
+	int ret;
+
+	ret = palmas_read(palmas, PALMAS_GPIO_BASE, PALMAS_GPIO_DATA_IN, &val);
+	if (ret < 0) {
+		dev_err(gc->dev, "GPIO_DATA_IN read failed, err = %d\n", ret);
+		return ret;
+	}
+	return !!(val & BIT(offset));
+}
+
+static void palmas_gpio_set(struct gpio_chip *gc, unsigned offset,
+			int value)
+{
+	struct palmas_gpio *pg = to_palmas_gpio(gc);
+	struct palmas *palmas = pg->palmas;
+	int ret;
+
+	if (value)
+		ret = palmas_write(palmas, PALMAS_GPIO_BASE,
+				PALMAS_GPIO_SET_DATA_OUT, BIT(offset));
+	else
+		ret = palmas_write(palmas, PALMAS_GPIO_BASE,
+				PALMAS_GPIO_CLEAR_DATA_OUT, BIT(offset));
+	if (ret < 0)
+		dev_err(gc->dev, "%s write failed, err = %d\n",
+			(value) ? "GPIO_SET_DATA_OUT" : "GPIO_CLEAR_DATA_OUT",
+			ret);
+}
+
+static int palmas_gpio_output(struct gpio_chip *gc, unsigned offset,
+				int value)
+{
+	struct palmas_gpio *pg = to_palmas_gpio(gc);
+	struct palmas *palmas = pg->palmas;
+	int ret;
+
+	/* Set the initial value */
+	palmas_gpio_set(gc, offset, value);
+
+	ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE,
+		PALMAS_GPIO_DATA_DIR, BIT(offset), BIT(offset));
+	if (ret < 0)
+		dev_err(gc->dev, "GPIO_DATA_DIR write failed, err = %d\n", ret);
+	return ret;
+}
+
+static int palmas_gpio_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct palmas_gpio *pg = to_palmas_gpio(gc);
+	struct palmas *palmas = pg->palmas;
+	int ret;
+
+	ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE,
+		PALMAS_GPIO_DATA_DIR, BIT(offset), 0);
+	if (ret < 0)
+		dev_err(gc->dev, "GPIO_DATA_DIR write failed, err = %d\n", ret);
+	return ret;
+}
+
+static int palmas_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct palmas_gpio *pg = to_palmas_gpio(gc);
+	struct palmas *palmas = pg->palmas;
+
+	return palmas_irq_get_virq(palmas, PALMAS_GPIO_0_IRQ + offset);
+}
+
+static int palmas_gpio_probe(struct platform_device *pdev)
+{
+	struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
+	struct palmas_platform_data *palmas_pdata;
+	struct palmas_gpio *palmas_gpio;
+	int ret;
+
+	palmas_gpio = devm_kzalloc(&pdev->dev,
+				sizeof(*palmas_gpio), GFP_KERNEL);
+	if (!palmas_gpio) {
+		dev_err(&pdev->dev, "Could not allocate palmas_gpio\n");
+		return -ENOMEM;
+	}
+
+	palmas_gpio->palmas = palmas;
+	palmas_gpio->gpio_chip.owner = THIS_MODULE;
+	palmas_gpio->gpio_chip.label = dev_name(&pdev->dev);
+	palmas_gpio->gpio_chip.ngpio = 8;
+	palmas_gpio->gpio_chip.can_sleep = 1;
+	palmas_gpio->gpio_chip.direction_input = palmas_gpio_input;
+	palmas_gpio->gpio_chip.direction_output = palmas_gpio_output;
+	palmas_gpio->gpio_chip.to_irq = palmas_gpio_to_irq;
+	palmas_gpio->gpio_chip.set	= palmas_gpio_set;
+	palmas_gpio->gpio_chip.get	= palmas_gpio_get;
+	palmas_gpio->gpio_chip.dev = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+	palmas_gpio->gpio_chip.of_node = palmas->dev->of_node;
+#endif
+	palmas_pdata = dev_get_platdata(palmas->dev);
+	if (palmas_pdata && palmas_pdata->gpio_base)
+		palmas_gpio->gpio_chip.base = palmas_pdata->gpio_base;
+	else
+		palmas_gpio->gpio_chip.base = -1;
+
+	ret = gpiochip_add(&palmas_gpio->gpio_chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, palmas_gpio);
+	return ret;
+}
+
+static int palmas_gpio_remove(struct platform_device *pdev)
+{
+	struct palmas_gpio *palmas_gpio = platform_get_drvdata(pdev);
+
+	return gpiochip_remove(&palmas_gpio->gpio_chip);
+}
+
+static struct platform_driver palmas_gpio_driver = {
+	.driver.name	= "palmas-gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= palmas_gpio_probe,
+	.remove		= palmas_gpio_remove,
+};
+
+static int __init palmas_gpio_init(void)
+{
+	return platform_driver_register(&palmas_gpio_driver);
+}
+subsys_initcall(palmas_gpio_init);
+
+static void __exit palmas_gpio_exit(void)
+{
+	platform_driver_unregister(&palmas_gpio_driver);
+}
+module_exit(palmas_gpio_exit);
+
+MODULE_ALIAS("platform:palmas-gpio");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("GPIO driver for TI Palmas series PMICs");
+MODULE_LICENSE("GPL v2");

drivers/input/misc/max8925_onkey.c

@@ -100,9 +100,6 @@ static int max8925_onkey_probe(struct platform_device *pdev)
 	input->dev.parent = &pdev->dev;
 	input_set_capability(input, EV_KEY, KEY_POWER);
 
-	irq[0] += chip->irq_base;
-	irq[1] += chip->irq_base;
-
 	error = request_threaded_irq(irq[0], NULL, max8925_onkey_handler,
 				     IRQF_ONESHOT, "onkey-down", info);
 	if (error < 0) {

drivers/memstick/host/rtsx_pci_ms.c

@@ -426,6 +426,9 @@ static void rtsx_pci_ms_request(struct memstick_host *msh)
 
 	dev_dbg(ms_dev(host), "--> %s\n", __func__);
 
+	if (rtsx_pci_card_exclusive_check(host->pcr, RTSX_MS_CARD))
+		return;
+
 	schedule_work(&host->handle_req);
 }
 
@@ -441,6 +444,10 @@ static int rtsx_pci_ms_set_param(struct memstick_host *msh,
 	dev_dbg(ms_dev(host), "%s: param = %d, value = %d\n",
 			__func__, param, value);
 
+	err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_MS_CARD);
+	if (err)
+		return err;
+
 	switch (param) {
 	case MEMSTICK_POWER:
 		if (value == MEMSTICK_POWER_ON)

drivers/mfd/88pm800.c

@@ -531,7 +531,7 @@ static int pm800_probe(struct i2c_client *client,
 	ret = device_800_init(chip, pdata);
 	if (ret) {
 		dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id);
-		goto err_800_init;
+		goto err_subchip_alloc;
 	}
 
 	ret = pm800_pages_init(chip);
@@ -546,10 +546,8 @@ static int pm800_probe(struct i2c_client *client,
 err_page_init:
 	mfd_remove_devices(chip->dev);
 	device_irq_exit_800(chip);
-err_800_init:
-	devm_kfree(&client->dev, subchip);
 err_subchip_alloc:
-	pm80x_deinit(client);
+	pm80x_deinit();
 out_init:
 	return ret;
 }
@@ -562,9 +560,7 @@ static int pm800_remove(struct i2c_client *client)
 	device_irq_exit_800(chip);
 
 	pm800_pages_exit(chip);
-	devm_kfree(&client->dev, chip->subchip);
-
-	pm80x_deinit(client);
+	pm80x_deinit();
 
 	return 0;
 }

drivers/mfd/88pm805.c

@@ -257,7 +257,7 @@ static int pm805_probe(struct i2c_client *client,
 		pdata->plat_config(chip, pdata);
 
 err_805_init:
-	pm80x_deinit(client);
+	pm80x_deinit();
 out_init:
 	return ret;
 }
@@ -269,7 +269,7 @@ static int pm805_remove(struct i2c_client *client)
 	mfd_remove_devices(chip->dev);
 	device_irq_exit_805(chip);
 
-	pm80x_deinit(client);
+	pm80x_deinit();
 
 	return 0;
 }

drivers/mfd/88pm80x.c

@@ -48,14 +48,12 @@ int pm80x_init(struct i2c_client *client,
 		ret = PTR_ERR(map);
 		dev_err(&client->dev, "Failed to allocate register map: %d\n",
 			ret);
-		goto err_regmap_init;
+		return ret;
 	}
 
 	chip->id = id->driver_data;
-	if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805) {
-		ret = -EINVAL;
-		goto err_chip_id;
-	}
+	if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805)
+		return -EINVAL;
 
 	chip->client = client;
 	chip->regmap = map;
@@ -82,19 +80,11 @@ int pm80x_init(struct i2c_client *client,
 	}
 
 	return 0;
-
-err_chip_id:
-	regmap_exit(map);
-err_regmap_init:
-	devm_kfree(&client->dev, chip);
-	return ret;
 }
 EXPORT_SYMBOL_GPL(pm80x_init);
 
-int pm80x_deinit(struct i2c_client *client)
+int pm80x_deinit(void)
 {
-	struct pm80x_chip *chip = i2c_get_clientdata(client);
-
 	/*
 	 * workaround: clear the dependency between pm800 and pm805.
 	 * would remove it after HW chip fixes the issue.
@@ -103,10 +93,6 @@ int pm80x_deinit(struct i2c_client *client)
 		g_pm80x_chip->companion = NULL;
 	else
 		g_pm80x_chip = NULL;
-
-	regmap_exit(chip->regmap);
-	devm_kfree(&client->dev, chip);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pm80x_deinit);

drivers/mfd/Kconfig

@@ -65,7 +65,7 @@ config MFD_SM501_GPIO
 
 config MFD_RTSX_PCI
 	tristate "Support for Realtek PCI-E card reader"
-	depends on PCI
+	depends on PCI && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  This supports for Realtek PCI-Express card reader including rts5209,
@@ -95,7 +95,7 @@ config MFD_DM355EVM_MSP
 
 config MFD_TI_SSP
 	tristate "TI Sequencer Serial Port support"
-	depends on ARCH_DAVINCI_TNETV107X
+	depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
 	select MFD_CORE
 	---help---
 	  Say Y here if you want support for the Sequencer Serial Port
@@ -109,6 +109,7 @@ config MFD_TI_AM335X_TSCADC
 	select MFD_CORE
 	select REGMAP
 	select REGMAP_MMIO
+	depends on GENERIC_HARDIRQS
 	help
 	  If you say yes here you get support for Texas Instruments series
 	  of Touch Screen /ADC chips.
@@ -126,6 +127,7 @@ config HTC_EGPIO
 config HTC_PASIC3
 	tristate "HTC PASIC3 LED/DS1WM chip support"
 	select MFD_CORE
+	depends on GENERIC_HARDIRQS
 	help
 	  This core driver provides register access for the LED/DS1WM
 	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
@@ -157,6 +159,7 @@ config MFD_LM3533
 	depends on I2C
 	select MFD_CORE
 	select REGMAP_I2C
+	depends on GENERIC_HARDIRQS
 	help
 	  Say yes here to enable support for National Semiconductor / TI
 	  LM3533 Lighting Power chips.
@@ -171,6 +174,7 @@ config TPS6105X
 	select REGULATOR
 	select MFD_CORE
 	select REGULATOR_FIXED_VOLTAGE
+	depends on GENERIC_HARDIRQS
 	help
 	  This option enables a driver for the TP61050/TPS61052
 	  high-power "white LED driver". This boost converter is
@@ -193,7 +197,7 @@ config TPS65010
 config TPS6507X
 	tristate "TPS6507x Power Management / Touch Screen chips"
 	select MFD_CORE
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	help
 	  If you say yes here you get support for the TPS6507x series of
 	  Power Management / Touch Screen chips.  These include voltage
@@ -204,7 +208,7 @@ config TPS6507X
 
 config MFD_TPS65217
 	tristate "TPS65217 Power Management / White LED chips"
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -234,7 +238,7 @@ config MFD_TPS6586X
 
 config MFD_TPS65910
 	bool "TPS65910 Power Management chip"
-	depends on I2C=y && GPIOLIB
+	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -251,7 +255,7 @@ config MFD_TPS65912_I2C
 	bool "TPS65912 Power Management chip with I2C"
 	select MFD_CORE
 	select MFD_TPS65912
-	depends on I2C=y && GPIOLIB
+	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
 	help
 	  If you say yes here you get support for the TPS65912 series of
 	  PM chips with I2C interface.
@@ -260,7 +264,7 @@ config MFD_TPS65912_SPI
 	bool "TPS65912 Power Management chip with SPI"
 	select MFD_CORE
 	select MFD_TPS65912
-	depends on SPI_MASTER && GPIOLIB
+	depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
 	help
 	  If you say yes here you get support for the TPS65912 series of
 	  PM chips with SPI interface.
@@ -330,13 +334,13 @@ config TWL4030_POWER
 
 config MFD_TWL4030_AUDIO
 	bool
-	depends on TWL4030_CORE
+	depends on TWL4030_CORE && GENERIC_HARDIRQS
 	select MFD_CORE
 	default n
 
 config TWL6040_CORE
 	bool "Support for TWL6040 audio codec"
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -405,7 +409,7 @@ config MFD_TMIO
 
 config MFD_T7L66XB
 	bool "Support Toshiba T7L66XB"
-	depends on ARM && HAVE_CLK
+	depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
 	select MFD_CORE
 	select MFD_TMIO
 	help
@@ -413,7 +417,7 @@ config MFD_T7L66XB
 
 config MFD_SMSC
        bool "Support for the SMSC ECE1099 series chips"
-       depends on I2C=y
+       depends on I2C=y && GENERIC_HARDIRQS
        select MFD_CORE
        select REGMAP_I2C
        help
@@ -460,7 +464,7 @@ config MFD_DA9052_SPI
 	select REGMAP_SPI
 	select REGMAP_IRQ
 	select PMIC_DA9052
-	depends on SPI_MASTER=y
+	depends on SPI_MASTER=y && GENERIC_HARDIRQS
 	help
 	  Support for the Dialog Semiconductor DA9052 PMIC
 	  when controlled using SPI. This driver provides common support
@@ -472,7 +476,7 @@ config MFD_DA9052_I2C
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select PMIC_DA9052
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Support for the Dialog Semiconductor DA9052 PMIC
 	  when controlled using I2C. This driver provides common support
@@ -485,7 +489,7 @@ config MFD_DA9055
 	select REGMAP_IRQ
 	select PMIC_DA9055
 	select MFD_CORE
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Say yes here for support of Dialog Semiconductor DA9055. This is
 	  a Power Management IC. This driver provides common support for
@@ -508,7 +512,7 @@ config PMIC_ADP5520
 
 config MFD_LP8788
 	bool "Texas Instruments LP8788 Power Management Unit Driver"
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
 	select IRQ_DOMAIN
@@ -611,7 +615,7 @@ config MFD_ARIZONA_I2C
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_I2C
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelectronics Arizona platform audio SoC
 	  core functionality controlled via I2C.
@@ -621,7 +625,7 @@ config MFD_ARIZONA_SPI
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_SPI
-	depends on SPI_MASTER
+	depends on SPI_MASTER && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelectronics Arizona platform audio SoC
 	  core functionality controlled via I2C.
@@ -641,7 +645,7 @@ config MFD_WM5110
 config MFD_WM8400
 	bool "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select REGMAP_I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -785,7 +789,7 @@ config MFD_MC13783
 
 config MFD_MC13XXX
 	tristate
-	depends on SPI_MASTER || I2C
+	depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
 	select MFD_CORE
 	select MFD_MC13783
 	help
@@ -796,7 +800,7 @@ config MFD_MC13XXX
 
 config MFD_MC13XXX_SPI
 	tristate "Freescale MC13783 and MC13892 SPI interface"
-	depends on SPI_MASTER
+	depends on SPI_MASTER && GENERIC_HARDIRQS
 	select REGMAP_SPI
 	select MFD_MC13XXX
 	help
@@ -804,7 +808,7 @@ config MFD_MC13XXX_SPI
 
 config MFD_MC13XXX_I2C
 	tristate "Freescale MC13892 I2C interface"
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	select REGMAP_I2C
 	select MFD_MC13XXX
 	help
@@ -822,7 +826,7 @@ config ABX500_CORE
 
 config AB3100_CORE
 	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
-	depends on I2C=y && ABX500_CORE
+	depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
 	select MFD_CORE
 	default y if ARCH_U300
 	help
@@ -909,7 +913,7 @@ config MFD_TIMBERDALE
 
 config LPC_SCH
 	tristate "Intel SCH LPC"
-	depends on PCI
+	depends on PCI && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  LPC bridge function of the Intel SCH provides support for
@@ -917,7 +921,7 @@ config LPC_SCH
 
 config LPC_ICH
 	tristate "Intel ICH LPC"
-	depends on PCI
+	depends on PCI && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  The LPC bridge function of the Intel ICH provides support for
@@ -928,7 +932,7 @@ config LPC_ICH
 config MFD_RDC321X
 	tristate "Support for RDC-R321x southbridge"
 	select MFD_CORE
-	depends on PCI
+	depends on PCI && GENERIC_HARDIRQS
 	help
 	  Say yes here if you want to have support for the RDC R-321x SoC
 	  southbridge which provides access to GPIOs and Watchdog using the
@@ -937,7 +941,7 @@ config MFD_RDC321X
 config MFD_JANZ_CMODIO
 	tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
 	select MFD_CORE
-	depends on PCI
+	depends on PCI && GENERIC_HARDIRQS
 	help
 	  This is the core driver for the Janz CMOD-IO PCI MODULbus
 	  carrier board. This device is a PCI to MODULbus bridge which may
@@ -955,7 +959,7 @@ config MFD_JZ4740_ADC
 
 config MFD_VX855
 	tristate "Support for VIA VX855/VX875 integrated south bridge"
-	depends on PCI
+	depends on PCI && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  Say yes here to enable support for various functions of the
@@ -964,7 +968,7 @@ config MFD_VX855
 
 config MFD_WL1273_CORE
 	tristate "Support for TI WL1273 FM radio."
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	select MFD_CORE
 	default n
 	help
@@ -1028,7 +1032,7 @@ config MFD_TPS65090
 config MFD_AAT2870_CORE
 	bool "Support for the AnalogicTech AAT2870"
 	select MFD_CORE
-	depends on I2C=y && GPIOLIB
+	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
 	help
 	  If you say yes here you get support for the AAT2870.
 	  This driver provides common support for accessing the device,
@@ -1060,7 +1064,7 @@ config MFD_RC5T583
 
 config MFD_STA2X11
 	bool "STA2X11 multi function device support"
-	depends on STA2X11
+	depends on STA2X11 && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_MMIO
 
@@ -1077,7 +1081,7 @@ config MFD_PALMAS
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  If you say yes here you get support for the Palmas
 	  series of PMIC chips from Texas Instruments.
@@ -1085,7 +1089,7 @@ config MFD_PALMAS
 config MFD_VIPERBOARD
         tristate "Support for Nano River Technologies Viperboard"
 	select MFD_CORE
-	depends on USB
+	depends on USB && GENERIC_HARDIRQS
 	default n
 	help
 	  Say yes here if you want support for Nano River Technologies
@@ -1099,7 +1103,7 @@ config MFD_VIPERBOARD
 config MFD_RETU
 	tristate "Support for Retu multi-function device"
 	select MFD_CORE
-	depends on I2C
+	depends on I2C && GENERIC_HARDIRQS
 	select REGMAP_IRQ
 	help
 	  Retu is a multi-function device found on Nokia Internet Tablets
@@ -1110,7 +1114,7 @@ config MFD_AS3711
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Support for the AS3711 PMIC from AMS
 

drivers/mfd/Makefile

@@ -9,7 +9,7 @@ obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
 
-rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o rtl8411.o
+rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o
 obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
 
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o

drivers/mfd/ab8500-core.c

@@ -320,6 +320,7 @@ static struct abx500_ops ab8500_ops = {
 	.mask_and_set_register = ab8500_mask_and_set_register,
 	.event_registers_startup_state_get = NULL,
 	.startup_irq_enabled = NULL,
+	.dump_all_banks = ab8500_dump_all_banks,
 };
 
 static void ab8500_irq_lock(struct irq_data *data)
@@ -368,16 +369,48 @@ static void ab8500_irq_mask(struct irq_data *data)
 	int mask = 1 << (offset % 8);
 
 	ab8500->mask[index] |= mask;
+
+	/* The AB8500 GPIOs have two interrupts each (rising & falling). */
+	if (offset >= AB8500_INT_GPIO6R && offset <= AB8500_INT_GPIO41R)
+		ab8500->mask[index + 2] |= mask;
+	if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R)
+		ab8500->mask[index + 1] |= mask;
+	if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R)
+		/* Here the falling IRQ is one bit lower */
+		ab8500->mask[index] |= (mask << 1);
 }
 
 static void ab8500_irq_unmask(struct irq_data *data)
 {
 	struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data);
+	unsigned int type = irqd_get_trigger_type(data);
 	int offset = data->hwirq;
 	int index = offset / 8;
 	int mask = 1 << (offset % 8);
 
+	if (type & IRQ_TYPE_EDGE_RISING)
+		ab8500->mask[index] &= ~mask;
+
+	/* The AB8500 GPIOs have two interrupts each (rising & falling). */
+	if (type & IRQ_TYPE_EDGE_FALLING) {
+		if (offset >= AB8500_INT_GPIO6R && offset <= AB8500_INT_GPIO41R)
+			ab8500->mask[index + 2] &= ~mask;
+		else if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R)
+			ab8500->mask[index + 1] &= ~mask;
+		else if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R)
+			/* Here the falling IRQ is one bit lower */
+			ab8500->mask[index] &= ~(mask << 1);
+		else
 			ab8500->mask[index] &= ~mask;
+	} else {
+		/* Satisfies the case where type is not set. */
+		ab8500->mask[index] &= ~mask;
+	}
+}
+
+static int ab8500_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	return 0;
 }
 
 static struct irq_chip ab8500_irq_chip = {
@@ -387,6 +420,7 @@ static struct irq_chip ab8500_irq_chip = {
 	.irq_mask		= ab8500_irq_mask,
 	.irq_disable		= ab8500_irq_mask,
 	.irq_unmask		= ab8500_irq_unmask,
+	.irq_set_type		= ab8500_irq_set_type,
 };
 
 static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
@@ -411,6 +445,19 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 		line = (i << 3) + int_bit;
 		latch_val &= ~(1 << int_bit);
 
+		/*
+		 * This handles the falling edge hwirqs from the GPIO
+		 * lines. Route them back to the line registered for the
+		 * rising IRQ, as this is merely a flag for the same IRQ
+		 * in linux terms.
+		 */
+		if (line >= AB8500_INT_GPIO6F && line <= AB8500_INT_GPIO41F)
+			line -= 16;
+		if (line >= AB9540_INT_GPIO50F && line <= AB9540_INT_GPIO54F)
+			line -= 8;
+		if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F)
+			line += 1;
+
 		handle_nested_irq(ab8500->irq_base + line);
 	} while (latch_val);
 
@@ -521,6 +568,7 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
 			int virq = ab8500_irq_get_virq(ab8500, line);
 
 			handle_nested_irq(virq);
+			ab8500_debug_register_interrupt(line);
 			value &= ~(1 << bit);
 
 		} while (value);
@@ -929,7 +977,7 @@ static struct resource ab8505_iddet_resources[] = {
 
 static struct resource ab8500_temp_resources[] = {
 	{
-		.name  = "AB8500_TEMP_WARM",
+		.name  = "ABX500_TEMP_WARM",
 		.start = AB8500_INT_TEMP_WARM,
 		.end   = AB8500_INT_TEMP_WARM,
 		.flags = IORESOURCE_IRQ,
@@ -1005,8 +1053,8 @@ static struct mfd_cell abx500_common_devs[] = {
 		.of_compatible = "stericsson,ab8500-denc",
 	},
 	{
-		.name = "ab8500-temp",
-		.of_compatible = "stericsson,ab8500-temp",
+		.name = "abx500-temp",
+		.of_compatible = "stericsson,abx500-temp",
 		.num_resources = ARRAY_SIZE(ab8500_temp_resources),
 		.resources = ab8500_temp_resources,
 	},
@@ -1049,7 +1097,7 @@ static struct mfd_cell ab8500_bm_devs[] = {
 
 static struct mfd_cell ab8500_devs[] = {
 	{
-		.name = "ab8500-gpio",
+		.name = "pinctrl-ab8500",
 		.of_compatible = "stericsson,ab8500-gpio",
 	},
 	{
@@ -1066,7 +1114,8 @@ static struct mfd_cell ab8500_devs[] = {
 
 static struct mfd_cell ab9540_devs[] = {
 	{
-		.name = "ab8500-gpio",
+		.name = "pinctrl-ab9540",
+		.of_compatible = "stericsson,ab9540-gpio",
 	},
 	{
 		.name = "ab9540-usb",

drivers/mfd/ab8500-gpadc.c

@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/completion.h>
 #include <linux/regulator/consumer.h>
@@ -82,6 +83,11 @@
 /* This is used to not lose precision when dividing to get gain and offset */
 #define CALIB_SCALE			1000
 
+/* Time in ms before disabling regulator */
+#define GPADC_AUDOSUSPEND_DELAY		1
+
+#define CONVERSION_TIME			500 /* ms */
+
 enum cal_channels {
 	ADC_INPUT_VMAIN = 0,
 	ADC_INPUT_BTEMP,
@@ -102,10 +108,10 @@ struct adc_cal_data {
 
 /**
  * struct ab8500_gpadc - AB8500 GPADC device information
- * @chip_id			ABB chip id
  * @dev:			pointer to the struct device
  * @node:			a list of AB8500 GPADCs, hence prepared for
 				reentrance
+ * @parent:			pointer to the struct ab8500
  * @ab8500_gpadc_complete:	pointer to the struct completion, to indicate
  *				the completion of gpadc conversion
  * @ab8500_gpadc_lock:		structure of type mutex
@@ -114,9 +120,9 @@ struct adc_cal_data {
  * @cal_data			array of ADC calibration data structs
  */
 struct ab8500_gpadc {
-	u8 chip_id;
 	struct device *dev;
 	struct list_head node;
+	struct ab8500 *parent;
 	struct completion ab8500_gpadc_complete;
 	struct mutex ab8500_gpadc_lock;
 	struct regulator *regu;
@@ -282,8 +288,9 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		return -ENODEV;
 
 	mutex_lock(&gpadc->ab8500_gpadc_lock);
+
 	/* Enable VTVout LDO this is required for GPADC */
-	regulator_enable(gpadc->regu);
+	pm_runtime_get_sync(gpadc->dev);
 
 	/* Check if ADC is not busy, lock and proceed */
 	do {
@@ -332,7 +339,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 			EN_BUF | EN_ICHAR);
 		break;
 	case BTEMP_BALL:
-		if (gpadc->chip_id >= AB8500_CUT3P0) {
+		if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
 			/* Turn on btemp pull-up on ABB 3.0 */
 			ret = abx500_mask_and_set_register_interruptible(
 				gpadc->dev,
@@ -344,7 +351,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		  * Delay might be needed for ABB8500 cut 3.0, if not, remove
 		  * when hardware will be available
 		  */
-			msleep(1);
+			usleep_range(1000, 1000);
 			break;
 		}
 		/* Intentional fallthrough */
@@ -367,7 +374,8 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		goto out;
 	}
 	/* wait for completion of conversion */
-	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) {
+	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
+					 msecs_to_jiffies(CONVERSION_TIME))) {
 		dev_err(gpadc->dev,
 			"timeout: didn't receive GPADC conversion interrupt\n");
 		ret = -EINVAL;
@@ -397,8 +405,10 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
 		goto out;
 	}
-	/* Disable VTVout LDO this is required for GPADC */
-	regulator_disable(gpadc->regu);
+
+	pm_runtime_mark_last_busy(gpadc->dev);
+	pm_runtime_put_autosuspend(gpadc->dev);
+
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 
 	return (high_data << 8) | low_data;
@@ -412,7 +422,9 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 	 */
 	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
 		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-	regulator_disable(gpadc->regu);
+
+	pm_runtime_put(gpadc->dev);
+
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 	dev_err(gpadc->dev,
 		"gpadc_conversion: Failed to AD convert channel %d\n", channel);
@@ -571,6 +583,28 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 		gpadc->cal_data[ADC_INPUT_VBAT].offset);
 }
 
+static int ab8500_gpadc_runtime_suspend(struct device *dev)
+{
+	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+	regulator_disable(gpadc->regu);
+	return 0;
+}
+
+static int ab8500_gpadc_runtime_resume(struct device *dev)
+{
+	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+	regulator_enable(gpadc->regu);
+	return 0;
+}
+
+static int ab8500_gpadc_runtime_idle(struct device *dev)
+{
+	pm_runtime_suspend(dev);
+	return 0;
+}
+
 static int ab8500_gpadc_probe(struct platform_device *pdev)
 {
 	int ret = 0;
@@ -591,6 +625,7 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	}
 
 	gpadc->dev = &pdev->dev;
+	gpadc->parent = dev_get_drvdata(pdev->dev.parent);
 	mutex_init(&gpadc->ab8500_gpadc_lock);
 
 	/* Initialize completion used to notify completion of conversion */
@@ -607,14 +642,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 		goto fail;
 	}
 
-	/* Get Chip ID of the ABB ASIC  */
-	ret = abx500_get_chip_id(gpadc->dev);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "failed to get chip ID\n");
-		goto fail_irq;
-	}
-	gpadc->chip_id = (u8) ret;
-
 	/* VTVout LDO used to power up ab8500-GPADC */
 	gpadc->regu = regulator_get(&pdev->dev, "vddadc");
 	if (IS_ERR(gpadc->regu)) {
@@ -622,6 +649,16 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 		dev_err(gpadc->dev, "failed to get vtvout LDO\n");
 		goto fail_irq;
 	}
+
+	platform_set_drvdata(pdev, gpadc);
+
+	regulator_enable(gpadc->regu);
+
+	pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(gpadc->dev);
+	pm_runtime_set_active(gpadc->dev);
+	pm_runtime_enable(gpadc->dev);
+
 	ab8500_gpadc_read_calibration_data(gpadc);
 	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
 	dev_dbg(gpadc->dev, "probe success\n");
@@ -642,19 +679,34 @@ static int ab8500_gpadc_remove(struct platform_device *pdev)
 	list_del(&gpadc->node);
 	/* remove interrupt  - completion of Sw ADC conversion */
 	free_irq(gpadc->irq, gpadc);
-	/* disable VTVout LDO that is being used by GPADC */
-	regulator_put(gpadc->regu);
+
+	pm_runtime_get_sync(gpadc->dev);
+	pm_runtime_disable(gpadc->dev);
+
+	regulator_disable(gpadc->regu);
+
+	pm_runtime_set_suspended(gpadc->dev);
+
+	pm_runtime_put_noidle(gpadc->dev);
+
 	kfree(gpadc);
 	gpadc = NULL;
 	return 0;
 }
 
+static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
+	SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
+			   ab8500_gpadc_runtime_resume,
+			   ab8500_gpadc_runtime_idle)
+};
+
 static struct platform_driver ab8500_gpadc_driver = {
 	.probe = ab8500_gpadc_probe,
 	.remove = ab8500_gpadc_remove,
 	.driver = {
 		.name = "ab8500-gpadc",
 		.owner = THIS_MODULE,
+		.pm = &ab8500_gpadc_pm_ops,
 	},
 };
 

drivers/mfd/ab8500-sysctrl.c

@@ -7,12 +7,73 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/reboot.h>
+#include <linux/signal.h>
+#include <linux/power_supply.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-sysctrl.h>
 
 static struct device *sysctrl_dev;
 
+void ab8500_power_off(void)
+{
+	sigset_t old;
+	sigset_t all;
+	static char *pss[] = {"ab8500_ac", "ab8500_usb"};
+	int i;
+	bool charger_present = false;
+	union power_supply_propval val;
+	struct power_supply *psy;
+	int ret;
+
+	/*
+	 * If we have a charger connected and we're powering off,
+	 * reboot into charge-only mode.
+	 */
+
+	for (i = 0; i < ARRAY_SIZE(pss); i++) {
+		psy = power_supply_get_by_name(pss[i]);
+		if (!psy)
+			continue;
+
+		ret = psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &val);
+
+		if (!ret && val.intval) {
+			charger_present = true;
+			break;
+		}
+	}
+
+	if (!charger_present)
+		goto shutdown;
+
+	/* Check if battery is known */
+	psy = power_supply_get_by_name("ab8500_btemp");
+	if (psy) {
+		ret = psy->get_property(psy, POWER_SUPPLY_PROP_TECHNOLOGY,
+					&val);
+		if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) {
+			printk(KERN_INFO
+			       "Charger \"%s\" is connected with known battery."
+			       " Rebooting.\n",
+			       pss[i]);
+			machine_restart("charging");
+		}
+	}
+
+shutdown:
+	sigfillset(&all);
+
+	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+		(void)ab8500_sysctrl_set(AB8500_STW4500CTRL1,
+					 AB8500_STW4500CTRL1_SWOFF |
+					 AB8500_STW4500CTRL1_SWRESET4500N);
+		(void)sigprocmask(SIG_SETMASK, &old, NULL);
+	}
+}
+
 static inline bool valid_bank(u8 bank)
 {
 	return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
@@ -33,6 +94,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value)
 	return abx500_get_register_interruptible(sysctrl_dev, bank,
 		(u8)(reg & 0xFF), value);
 }
+EXPORT_SYMBOL(ab8500_sysctrl_read);
 
 int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
 {
@@ -48,10 +110,40 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
 	return abx500_mask_and_set_register_interruptible(sysctrl_dev, bank,
 		(u8)(reg & 0xFF), mask, value);
 }
+EXPORT_SYMBOL(ab8500_sysctrl_write);
 
 static int ab8500_sysctrl_probe(struct platform_device *pdev)
 {
+	struct ab8500_platform_data *plat;
+	struct ab8500_sysctrl_platform_data *pdata;
+
 	sysctrl_dev = &pdev->dev;
+	plat = dev_get_platdata(pdev->dev.parent);
+	if (plat->pm_power_off)
+		pm_power_off = ab8500_power_off;
+
+	pdata = plat->sysctrl;
+
+	if (pdata) {
+		int ret, i, j;
+
+		for (i = AB8500_SYSCLKREQ1RFCLKBUF;
+		     i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) {
+			j = i - AB8500_SYSCLKREQ1RFCLKBUF;
+			ret = ab8500_sysctrl_write(i, 0xff,
+						   pdata->initial_req_buf_config[j]);
+			dev_dbg(&pdev->dev,
+				"Setting SysClkReq%dRfClkBuf 0x%X\n",
+				j + 1,
+				pdata->initial_req_buf_config[j]);
+			if (ret < 0) {
+				dev_err(&pdev->dev,
+					"unable to set sysClkReq%dRfClkBuf: "
+					"%d\n", j + 1, ret);
+			}
+		}
+	}
+
 	return 0;
 }
 

drivers/mfd/abx500-core.c

@@ -153,6 +153,22 @@ int abx500_startup_irq_enabled(struct device *dev, unsigned int irq)
 }
 EXPORT_SYMBOL(abx500_startup_irq_enabled);
 
+void abx500_dump_all_banks(void)
+{
+	struct abx500_ops *ops;
+	struct device dummy_child = {0};
+	struct abx500_device_entry *dev_entry;
+
+	list_for_each_entry(dev_entry, &abx500_list, list) {
+		dummy_child.parent = dev_entry->dev;
+		ops = &dev_entry->ops;
+
+		if ((ops != NULL) && (ops->dump_all_banks != NULL))
+			ops->dump_all_banks(&dummy_child);
+	}
+}
+EXPORT_SYMBOL(abx500_dump_all_banks);
+
 MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
 MODULE_DESCRIPTION("ABX500 core driver");
 MODULE_LICENSE("GPL");

drivers/mfd/arizona-core.c

@@ -115,7 +115,7 @@ static irqreturn_t arizona_underclocked(int irq, void *data)
 	if (val & ARIZONA_ADC_UNDERCLOCKED_STS)
 		dev_err(arizona->dev, "ADC underclocked\n");
 	if (val & ARIZONA_MIXER_UNDERCLOCKED_STS)
-		dev_err(arizona->dev, "Mixer underclocked\n");
+		dev_err(arizona->dev, "Mixer dropped sample\n");
 
 	return IRQ_HANDLED;
 }
@@ -263,10 +263,36 @@ static int arizona_runtime_suspend(struct device *dev)
 }
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+static int arizona_resume_noirq(struct device *dev)
+{
+	struct arizona *arizona = dev_get_drvdata(dev);
+
+	dev_dbg(arizona->dev, "Early resume, disabling IRQ\n");
+	disable_irq(arizona->irq);
+
+	return 0;
+}
+
+static int arizona_resume(struct device *dev)
+{
+	struct arizona *arizona = dev_get_drvdata(dev);
+
+	dev_dbg(arizona->dev, "Late resume, reenabling IRQ\n");
+	enable_irq(arizona->irq);
+
+	return 0;
+}
+#endif
+
 const struct dev_pm_ops arizona_pm_ops = {
 	SET_RUNTIME_PM_OPS(arizona_runtime_suspend,
 			   arizona_runtime_resume,
 			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(NULL, arizona_resume)
+#ifdef CONFIG_PM_SLEEP
+	.resume_noirq = arizona_resume_noirq,
+#endif
 };
 EXPORT_SYMBOL_GPL(arizona_pm_ops);
 
@@ -275,19 +301,19 @@ static struct mfd_cell early_devs[] = {
 };
 
 static struct mfd_cell wm5102_devs[] = {
+	{ .name = "arizona-micsupp" },
 	{ .name = "arizona-extcon" },
 	{ .name = "arizona-gpio" },
 	{ .name = "arizona-haptics" },
-	{ .name = "arizona-micsupp" },
 	{ .name = "arizona-pwm" },
 	{ .name = "wm5102-codec" },
 };
 
 static struct mfd_cell wm5110_devs[] = {
+	{ .name = "arizona-micsupp" },
 	{ .name = "arizona-extcon" },
 	{ .name = "arizona-gpio" },
 	{ .name = "arizona-haptics" },
-	{ .name = "arizona-micsupp" },
 	{ .name = "arizona-pwm" },
 	{ .name = "wm5110-codec" },
 };
@@ -484,6 +510,29 @@ int arizona_dev_init(struct arizona *arizona)
 		goto err_reset;
 	}
 
+	for (i = 0; i < ARIZONA_MAX_MICBIAS; i++) {
+		if (!arizona->pdata.micbias[i].mV)
+			continue;
+
+		val = (arizona->pdata.micbias[i].mV - 1500) / 100;
+		val <<= ARIZONA_MICB1_LVL_SHIFT;
+
+		if (arizona->pdata.micbias[i].ext_cap)
+			val |= ARIZONA_MICB1_EXT_CAP;
+
+		if (arizona->pdata.micbias[i].discharge)
+			val |= ARIZONA_MICB1_DISCH;
+
+		if (arizona->pdata.micbias[i].fast_start)
+			val |= ARIZONA_MICB1_RATE;
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_MIC_BIAS_CTRL_1 + i,
+				   ARIZONA_MICB1_LVL_MASK |
+				   ARIZONA_MICB1_DISCH |
+				   ARIZONA_MICB1_RATE, val);
+	}
+
 	for (i = 0; i < ARIZONA_MAX_INPUT; i++) {
 		/* Default for both is 0 so noop with defaults */
 		val = arizona->pdata.dmic_ref[i]

drivers/mfd/da9052-i2c.c

@@ -60,7 +60,7 @@ static inline bool i2c_safe_reg(unsigned char reg)
  * This fix is to follow any read or write with a dummy read to a safe
  * register.
  */
-int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
+static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
 {
 	int val;
 
@@ -85,7 +85,6 @@ int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
 
 	return 0;
 }
-EXPORT_SYMBOL(da9052_i2c_fix);
 
 static int da9052_i2c_enable_multiwrite(struct da9052 *da9052)
 {

drivers/mfd/db8500-prcmu.c

@@ -33,6 +33,7 @@
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
 #include <linux/cpufreq.h>
+#include <linux/platform_data/ux500_wdt.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
@@ -2207,21 +2208,25 @@ int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
 			    sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
 			    A9WDOG_AUTO_OFF_DIS);
 }
+EXPORT_SYMBOL(db8500_prcmu_config_a9wdog);
 
 int db8500_prcmu_enable_a9wdog(u8 id)
 {
 	return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
 }
+EXPORT_SYMBOL(db8500_prcmu_enable_a9wdog);
 
 int db8500_prcmu_disable_a9wdog(u8 id)
 {
 	return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
 }
+EXPORT_SYMBOL(db8500_prcmu_disable_a9wdog);
 
 int db8500_prcmu_kick_a9wdog(u8 id)
 {
 	return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
 }
+EXPORT_SYMBOL(db8500_prcmu_kick_a9wdog);
 
 /*
  * timeout is 28 bit, in ms.
@@ -2239,6 +2244,7 @@ int db8500_prcmu_load_a9wdog(u8 id, u32 timeout)
 			    (u8)((timeout >> 12) & 0xff),
 			    (u8)((timeout >> 20) & 0xff));
 }
+EXPORT_SYMBOL(db8500_prcmu_load_a9wdog);
 
 /**
  * prcmu_abb_read() - Read register value(s) from the ABB.
@@ -3094,6 +3100,11 @@ static struct resource ab8500_resources[] = {
 	}
 };
 
+static struct ux500_wdt_data db8500_wdt_pdata = {
+	.timeout = 600, /* 10 minutes */
+	.has_28_bits_resolution = true,
+};
+
 static struct mfd_cell db8500_prcmu_devs[] = {
 	{
 		.name = "db8500-prcmu-regulators",
@@ -3107,6 +3118,12 @@ static struct mfd_cell db8500_prcmu_devs[] = {
 		.platform_data = &db8500_cpufreq_table,
 		.pdata_size = sizeof(db8500_cpufreq_table),
 	},
+	{
+		.name = "ux500_wdt",
+		.platform_data = &db8500_wdt_pdata,
+		.pdata_size = sizeof(db8500_wdt_pdata),
+		.id = -1,
+	},
 	{
 		.name = "ab8500-core",
 		.of_compatible = "stericsson,ab8500",

drivers/mfd/lpc_ich.c

@@ -50,6 +50,7 @@
  *	document number TBD : Panther Point
  *	document number TBD : Lynx Point
  *	document number TBD : Lynx Point-LP
+ *	document number TBD : Wellsburg
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -75,8 +76,10 @@
 #define ACPIBASE_GCS_OFF	0x3410
 #define ACPIBASE_GCS_END	0x3414
 
-#define GPIOBASE		0x48
-#define GPIOCTRL		0x4C
+#define GPIOBASE_ICH0		0x58
+#define GPIOCTRL_ICH0		0x5C
+#define GPIOBASE_ICH6		0x48
+#define GPIOCTRL_ICH6		0x4C
 
 #define RCBABASE		0xf0
 
@@ -84,8 +87,17 @@
 #define wdt_mem_res(i) wdt_res(ICH_RES_MEM_OFF, i)
 #define wdt_res(b, i) (&wdt_ich_res[(b) + (i)])
 
-static int lpc_ich_acpi_save = -1;
-static int lpc_ich_gpio_save = -1;
+struct lpc_ich_cfg {
+	int base;
+	int ctrl;
+	int save;
+};
+
+struct lpc_ich_priv {
+	int chipset;
+	struct lpc_ich_cfg acpi;
+	struct lpc_ich_cfg gpio;
+};
 
 static struct resource wdt_ich_res[] = {
 	/* ACPI - TCO */
@@ -194,6 +206,7 @@ enum lpc_chipsets {
 	LPC_PPT,	/* Panther Point */
 	LPC_LPT,	/* Lynx Point */
 	LPC_LPT_LP,	/* Lynx Point-LP */
+	LPC_WBG,	/* Wellsburg */
 };
 
 struct lpc_ich_info lpc_chipset_info[] = {
@@ -474,6 +487,10 @@ struct lpc_ich_info lpc_chipset_info[] = {
 		.name = "Lynx Point_LP",
 		.iTCO_version = 2,
 	},
+	[LPC_WBG] = {
+		.name = "Wellsburg",
+		.iTCO_version = 2,
+	},
 };
 
 /*
@@ -655,45 +672,82 @@ static DEFINE_PCI_DEVICE_TABLE(lpc_ich_ids) = {
 	{ PCI_VDEVICE(INTEL, 0x9c45), LPC_LPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9c46), LPC_LPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9c47), LPC_LPT_LP},
+	{ PCI_VDEVICE(INTEL, 0x8d40), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d41), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d42), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d43), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d44), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d45), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d46), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d47), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d48), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d49), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d4a), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d4b), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d4c), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d4d), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d4e), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d4f), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d50), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d51), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d52), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d53), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d54), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d55), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d56), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d57), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d58), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d59), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d5a), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d5b), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d5c), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d5d), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d5e), LPC_WBG},
+	{ PCI_VDEVICE(INTEL, 0x8d5f), LPC_WBG},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, lpc_ich_ids);
 
 static void lpc_ich_restore_config_space(struct pci_dev *dev)
 {
-	if (lpc_ich_acpi_save >= 0) {
-		pci_write_config_byte(dev, ACPICTRL, lpc_ich_acpi_save);
-		lpc_ich_acpi_save = -1;
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
+
+	if (priv->acpi.save >= 0) {
+		pci_write_config_byte(dev, priv->acpi.ctrl, priv->acpi.save);
+		priv->acpi.save = -1;
 	}
 
-	if (lpc_ich_gpio_save >= 0) {
-		pci_write_config_byte(dev, GPIOCTRL, lpc_ich_gpio_save);
-		lpc_ich_gpio_save = -1;
+	if (priv->gpio.save >= 0) {
+		pci_write_config_byte(dev, priv->gpio.ctrl, priv->gpio.save);
+		priv->gpio.save = -1;
 	}
 }
 
 static void lpc_ich_enable_acpi_space(struct pci_dev *dev)
 {
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 	u8 reg_save;
 
-	pci_read_config_byte(dev, ACPICTRL, &reg_save);
-	pci_write_config_byte(dev, ACPICTRL, reg_save | 0x10);
-	lpc_ich_acpi_save = reg_save;
+	pci_read_config_byte(dev, priv->acpi.ctrl, &reg_save);
+	pci_write_config_byte(dev, priv->acpi.ctrl, reg_save | 0x10);
+	priv->acpi.save = reg_save;
 }
 
 static void lpc_ich_enable_gpio_space(struct pci_dev *dev)
 {
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 	u8 reg_save;
 
-	pci_read_config_byte(dev, GPIOCTRL, &reg_save);
-	pci_write_config_byte(dev, GPIOCTRL, reg_save | 0x10);
-	lpc_ich_gpio_save = reg_save;
+	pci_read_config_byte(dev, priv->gpio.ctrl, &reg_save);
+	pci_write_config_byte(dev, priv->gpio.ctrl, reg_save | 0x10);
+	priv->gpio.save = reg_save;
 }
 
-static void lpc_ich_finalize_cell(struct mfd_cell *cell,
-					const struct pci_device_id *id)
+static void lpc_ich_finalize_cell(struct pci_dev *dev, struct mfd_cell *cell)
 {
-	cell->platform_data = &lpc_chipset_info[id->driver_data];
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
+
+	cell->platform_data = &lpc_chipset_info[priv->chipset];
 	cell->pdata_size = sizeof(struct lpc_ich_info);
 }
 
@@ -721,9 +775,9 @@ static int lpc_ich_check_conflict_gpio(struct resource *res)
 	return use_gpio ? use_gpio : ret;
 }
 
-static int lpc_ich_init_gpio(struct pci_dev *dev,
-				const struct pci_device_id *id)
+static int lpc_ich_init_gpio(struct pci_dev *dev)
 {
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 	u32 base_addr_cfg;
 	u32 base_addr;
 	int ret;
@@ -731,7 +785,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev,
 	struct resource *res;
 
 	/* Setup power management base register */
-	pci_read_config_dword(dev, ACPIBASE, &base_addr_cfg);
+	pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg);
 	base_addr = base_addr_cfg & 0x0000ff80;
 	if (!base_addr) {
 		dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
@@ -757,7 +811,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev,
 
 gpe0_done:
 	/* Setup GPIO base register */
-	pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg);
+	pci_read_config_dword(dev, priv->gpio.base, &base_addr_cfg);
 	base_addr = base_addr_cfg & 0x0000ff80;
 	if (!base_addr) {
 		dev_notice(&dev->dev, "I/O space for GPIO uninitialized\n");
@@ -768,7 +822,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev,
 	/* Older devices provide fewer GPIO and have a smaller resource size. */
 	res = &gpio_ich_res[ICH_RES_GPIO];
 	res->start = base_addr;
-	switch (lpc_chipset_info[id->driver_data].gpio_version) {
+	switch (lpc_chipset_info[priv->chipset].gpio_version) {
 	case ICH_V5_GPIO:
 	case ICH_V10CORP_GPIO:
 		res->end = res->start + 128 - 1;
@@ -784,10 +838,10 @@ static int lpc_ich_init_gpio(struct pci_dev *dev,
 		acpi_conflict = true;
 		goto gpio_done;
 	}
-	lpc_chipset_info[id->driver_data].use_gpio = ret;
+	lpc_chipset_info[priv->chipset].use_gpio = ret;
 	lpc_ich_enable_gpio_space(dev);
 
-	lpc_ich_finalize_cell(&lpc_ich_cells[LPC_GPIO], id);
+	lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_GPIO]);
 	ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_GPIO],
 			      1, NULL, 0, NULL);
 
@@ -798,16 +852,16 @@ static int lpc_ich_init_gpio(struct pci_dev *dev,
 	return ret;
 }
 
-static int lpc_ich_init_wdt(struct pci_dev *dev,
-				const struct pci_device_id *id)
+static int lpc_ich_init_wdt(struct pci_dev *dev)
 {
+	struct lpc_ich_priv *priv = pci_get_drvdata(dev);
 	u32 base_addr_cfg;
 	u32 base_addr;
 	int ret;
 	struct resource *res;
 
 	/* Setup power management base register */
-	pci_read_config_dword(dev, ACPIBASE, &base_addr_cfg);
+	pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg);
 	base_addr = base_addr_cfg & 0x0000ff80;
 	if (!base_addr) {
 		dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n");
@@ -830,7 +884,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev,
 	 * we have to read RCBA from PCI Config space 0xf0 and use
 	 * it as base. GCS = RCBA + ICH6_GCS(0x3410).
 	 */
-	if (lpc_chipset_info[id->driver_data].iTCO_version == 1) {
+	if (lpc_chipset_info[priv->chipset].iTCO_version == 1) {
 		/* Don't register iomem for TCO ver 1 */
 		lpc_ich_cells[LPC_WDT].num_resources--;
 	} else {
@@ -847,7 +901,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev,
 		res->end = base_addr + ACPIBASE_GCS_END;
 	}
 
-	lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id);
+	lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]);
 	ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_WDT],
 			      1, NULL, 0, NULL);
 
@@ -858,14 +912,36 @@ static int lpc_ich_init_wdt(struct pci_dev *dev,
 static int lpc_ich_probe(struct pci_dev *dev,
 				const struct pci_device_id *id)
 {
+	struct lpc_ich_priv *priv;
 	int ret;
 	bool cell_added = false;
 
-	ret = lpc_ich_init_wdt(dev, id);
+	priv = devm_kzalloc(&dev->dev,
+			    sizeof(struct lpc_ich_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->chipset = id->driver_data;
+	priv->acpi.save = -1;
+	priv->acpi.base = ACPIBASE;
+	priv->acpi.ctrl = ACPICTRL;
+
+	priv->gpio.save = -1;
+	if (priv->chipset <= LPC_ICH5) {
+		priv->gpio.base = GPIOBASE_ICH0;
+		priv->gpio.ctrl = GPIOCTRL_ICH0;
+	} else {
+		priv->gpio.base = GPIOBASE_ICH6;
+		priv->gpio.ctrl = GPIOCTRL_ICH6;
+	}
+
+	pci_set_drvdata(dev, priv);
+
+	ret = lpc_ich_init_wdt(dev);
 	if (!ret)
 		cell_added = true;
 
-	ret = lpc_ich_init_gpio(dev, id);
+	ret = lpc_ich_init_gpio(dev);
 	if (!ret)
 		cell_added = true;
 
@@ -876,6 +952,7 @@ static int lpc_ich_probe(struct pci_dev *dev,
 	if (!cell_added) {
 		dev_warn(&dev->dev, "No MFD cells added\n");
 		lpc_ich_restore_config_space(dev);
+		pci_set_drvdata(dev, NULL);
 		return -ENODEV;
 	}
 
@@ -886,6 +963,7 @@ static void lpc_ich_remove(struct pci_dev *dev)
 {
 	mfd_remove_devices(&dev->dev);
 	lpc_ich_restore_config_space(dev);
+	pci_set_drvdata(dev, NULL);
 }
 
 static struct pci_driver lpc_ich_driver = {

drivers/mfd/lpc_sch.c

@@ -45,34 +45,32 @@ static struct resource smbus_sch_resource = {
 		.flags = IORESOURCE_IO,
 };
 
-
 static struct resource gpio_sch_resource = {
 		.flags = IORESOURCE_IO,
 };
 
-static struct mfd_cell lpc_sch_cells[] = {
-	{
+static struct resource wdt_sch_resource = {
+		.flags = IORESOURCE_IO,
+};
+
+static struct mfd_cell lpc_sch_cells[3];
+
+static struct mfd_cell isch_smbus_cell = {
 	.name = "isch_smbus",
 	.num_resources = 1,
 	.resources = &smbus_sch_resource,
-	},
-	{
+};
+
+static struct mfd_cell sch_gpio_cell = {
 	.name = "sch_gpio",
 	.num_resources = 1,
 	.resources = &gpio_sch_resource,
-	},
-};
-
-static struct resource wdt_sch_resource = {
-		.flags = IORESOURCE_IO,
 };
 
-static struct mfd_cell tunnelcreek_cells[] = {
-	{
+static struct mfd_cell wdt_sch_cell = {
 	.name = "ie6xx_wdt",
 	.num_resources = 1,
 	.resources = &wdt_sch_resource,
-	},
 };
 
 static DEFINE_PCI_DEVICE_TABLE(lpc_sch_ids) = {
@@ -88,79 +86,76 @@ static int lpc_sch_probe(struct pci_dev *dev,
 {
 	unsigned int base_addr_cfg;
 	unsigned short base_addr;
-	int i;
+	int i, cells = 0;
 	int ret;
 
 	pci_read_config_dword(dev, SMBASE, &base_addr_cfg);
-	if (!(base_addr_cfg & (1 << 31))) {
-		dev_err(&dev->dev, "Decode of the SMBus I/O range disabled\n");
-		return -ENODEV;
-	}
+	base_addr = 0;
+	if (!(base_addr_cfg & (1 << 31)))
+		dev_warn(&dev->dev, "Decode of the SMBus I/O range disabled\n");
+	else
 		base_addr = (unsigned short)base_addr_cfg;
-	if (base_addr == 0) {
-		dev_err(&dev->dev, "I/O space for SMBus uninitialized\n");
-		return -ENODEV;
-	}
 
+	if (base_addr == 0) {
+		dev_warn(&dev->dev, "I/O space for SMBus uninitialized\n");
+	} else {
+		lpc_sch_cells[cells++] = isch_smbus_cell;
 		smbus_sch_resource.start = base_addr;
 		smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1;
+	}
 
 	pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg);
-	if (!(base_addr_cfg & (1 << 31))) {
-		dev_err(&dev->dev, "Decode of the GPIO I/O range disabled\n");
-		return -ENODEV;
-	}
+	base_addr = 0;
+	if (!(base_addr_cfg & (1 << 31)))
+		dev_warn(&dev->dev, "Decode of the GPIO I/O range disabled\n");
+	else
 		base_addr = (unsigned short)base_addr_cfg;
-	if (base_addr == 0) {
-		dev_err(&dev->dev, "I/O space for GPIO uninitialized\n");
-		return -ENODEV;
-	}
 
+	if (base_addr == 0) {
+		dev_warn(&dev->dev, "I/O space for GPIO uninitialized\n");
+	} else {
+		lpc_sch_cells[cells++] = sch_gpio_cell;
 		gpio_sch_resource.start = base_addr;
-
 		if (id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB)
 			gpio_sch_resource.end = base_addr + GPIO_IO_SIZE_CENTERTON - 1;
 		else
 			gpio_sch_resource.end = base_addr + GPIO_IO_SIZE - 1;
-
-	for (i=0; i < ARRAY_SIZE(lpc_sch_cells); i++)
-		lpc_sch_cells[i].id = id->device;
-
-	ret = mfd_add_devices(&dev->dev, 0,
-			      lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL,
-			      0, NULL);
-	if (ret)
-		goto out_dev;
+	}
 
 	if (id->device == PCI_DEVICE_ID_INTEL_ITC_LPC
 	    || id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) {
 		pci_read_config_dword(dev, WDTBASE, &base_addr_cfg);
-		if (!(base_addr_cfg & (1 << 31))) {
-			dev_err(&dev->dev, "Decode of the WDT I/O range disabled\n");
-			ret = -ENODEV;
-			goto out_dev;
-		}
+		base_addr = 0;
+		if (!(base_addr_cfg & (1 << 31)))
+			dev_warn(&dev->dev, "Decode of the WDT I/O range disabled\n");
+		else
 			base_addr = (unsigned short)base_addr_cfg;
-		if (base_addr == 0) {
-			dev_err(&dev->dev, "I/O space for WDT uninitialized\n");
-			ret = -ENODEV;
-			goto out_dev;
-		}
-
+		if (base_addr == 0)
+			dev_warn(&dev->dev, "I/O space for WDT uninitialized\n");
+		else {
+			lpc_sch_cells[cells++] = wdt_sch_cell;
 			wdt_sch_resource.start = base_addr;
 			wdt_sch_resource.end = base_addr + WDT_IO_SIZE - 1;
+		}
+	}
 
-		for (i = 0; i < ARRAY_SIZE(tunnelcreek_cells); i++)
-			tunnelcreek_cells[i].id = id->device;
+	if (WARN_ON(cells > ARRAY_SIZE(lpc_sch_cells))) {
+		dev_err(&dev->dev, "Cell count exceeds array size");
+		return -ENODEV;
+	}
 
-		ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells,
-				      ARRAY_SIZE(tunnelcreek_cells), NULL,
-				      0, NULL);
+	if (cells == 0) {
+		dev_err(&dev->dev, "All decode registers disabled.\n");
+		return -ENODEV;
 	}
 
-	return ret;
-out_dev:
+	for (i = 0; i < cells; i++)
+		lpc_sch_cells[i].id = id->device;
+
+	ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
+	if (ret)
 		mfd_remove_devices(&dev->dev);
+
 	return ret;
 }
 

drivers/mfd/max8925-core.c

@@ -14,10 +14,13 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/irqdomain.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/max8925.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 static struct resource bk_resources[] = {
 	{ 0x84, 0x84, "mode control", IORESOURCE_REG, },
@@ -639,17 +642,33 @@ static struct irq_chip max8925_irq_chip = {
 	.irq_disable	= max8925_irq_disable,
 };
 
+static int max8925_irq_domain_map(struct irq_domain *d, unsigned int virq,
+				 irq_hw_number_t hw)
+{
+	irq_set_chip_data(virq, d->host_data);
+	irq_set_chip_and_handler(virq, &max8925_irq_chip, handle_edge_irq);
+	irq_set_nested_thread(virq, 1);
+#ifdef CONFIG_ARM
+	set_irq_flags(virq, IRQF_VALID);
+#else
+	irq_set_noprobe(virq);
+#endif
+	return 0;
+}
+
+static struct irq_domain_ops max8925_irq_domain_ops = {
+	.map	= max8925_irq_domain_map,
+	.xlate	= irq_domain_xlate_onetwocell,
+};
+
+
 static int max8925_irq_init(struct max8925_chip *chip, int irq,
 			    struct max8925_platform_data *pdata)
 {
 	unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
-	int i, ret;
-	int __irq;
+	int ret;
+	struct device_node *node = chip->dev->of_node;
 
-	if (!pdata || !pdata->irq_base) {
-		dev_warn(chip->dev, "No interrupt support on IRQ base\n");
-		return -EINVAL;
-	}
 	/* clear all interrupts */
 	max8925_reg_read(chip->i2c, MAX8925_CHG_IRQ1);
 	max8925_reg_read(chip->i2c, MAX8925_CHG_IRQ2);
@@ -667,35 +686,30 @@ static int max8925_irq_init(struct max8925_chip *chip, int irq,
 	max8925_reg_write(chip->rtc, MAX8925_RTC_IRQ_MASK, 0xff);
 
 	mutex_init(&chip->irq_lock);
-	chip->core_irq = irq;
-	chip->irq_base = pdata->irq_base;
-
-	/* register with genirq */
-	for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
-		__irq = i + chip->irq_base;
-		irq_set_chip_data(__irq, chip);
-		irq_set_chip_and_handler(__irq, &max8925_irq_chip,
-					 handle_edge_irq);
-		irq_set_nested_thread(__irq, 1);
-#ifdef CONFIG_ARM
-		set_irq_flags(__irq, IRQF_VALID);
-#else
-		irq_set_noprobe(__irq);
-#endif
-	}
-	if (!irq) {
-		dev_warn(chip->dev, "No interrupt support on core IRQ\n");
-		goto tsc_irq;
+	chip->irq_base = irq_alloc_descs(-1, 0, MAX8925_NR_IRQS, 0);
+	if (chip->irq_base < 0) {
+		dev_err(chip->dev, "Failed to allocate interrupts, ret:%d\n",
+			chip->irq_base);
+		return -EBUSY;
 	}
 
+	irq_domain_add_legacy(node, MAX8925_NR_IRQS, chip->irq_base, 0,
+			      &max8925_irq_domain_ops, chip);
+
+	/* request irq handler for pmic main irq*/
+	chip->core_irq = irq;
+	if (!chip->core_irq)
+		return -EBUSY;
 	ret = request_threaded_irq(irq, NULL, max8925_irq, flags | IRQF_ONESHOT,
 				   "max8925", chip);
 	if (ret) {
 		dev_err(chip->dev, "Failed to request core IRQ: %d\n", ret);
 		chip->core_irq = 0;
+		return -EBUSY;
 	}
 
-tsc_irq:
+	/* request irq handler for pmic tsc irq*/
+
 	/* mask TSC interrupt */
 	max8925_reg_write(chip->adc, MAX8925_TSC_IRQ_MASK, 0x0f);
 
@@ -704,7 +718,6 @@ static int max8925_irq_init(struct max8925_chip *chip, int irq,
 		return 0;
 	}
 	chip->tsc_irq = pdata->tsc_irq;
-
 	ret = request_threaded_irq(chip->tsc_irq, NULL, max8925_tsc_irq,
 				   flags | IRQF_ONESHOT, "max8925-tsc", chip);
 	if (ret) {
@@ -846,7 +859,7 @@ int max8925_device_init(struct max8925_chip *chip,
 
 	ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
 			      ARRAY_SIZE(rtc_devs),
-			      &rtc_resources[0], chip->irq_base, NULL);
+			      NULL, chip->irq_base, NULL);
 	if (ret < 0) {
 		dev_err(chip->dev, "Failed to add rtc subdev\n");
 		goto out;
@@ -854,7 +867,7 @@ int max8925_device_init(struct max8925_chip *chip,
 
 	ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
 			      ARRAY_SIZE(onkey_devs),
-			      &onkey_resources[0], 0, NULL);
+			      NULL, chip->irq_base, NULL);
 	if (ret < 0) {
 		dev_err(chip->dev, "Failed to add onkey subdev\n");
 		goto out_dev;
@@ -873,21 +886,19 @@ int max8925_device_init(struct max8925_chip *chip,
 		goto out_dev;
 	}
 
-	if (pdata && pdata->power) {
 	ret = mfd_add_devices(chip->dev, 0, &power_devs[0],
 			      ARRAY_SIZE(power_devs),
-				      &power_supply_resources[0], 0, NULL);
+			      NULL, 0, NULL);
 	if (ret < 0) {
-			dev_err(chip->dev, "Failed to add power supply "
-				"subdev\n");
+		dev_err(chip->dev,
+			"Failed to add power supply subdev, err = %d\n", ret);
 		goto out_dev;
 	}
-	}
 
 	if (pdata && pdata->touch) {
 		ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
 				      ARRAY_SIZE(touch_devs),
-				      &touch_resources[0], 0, NULL);
+				      NULL, chip->tsc_irq, NULL);
 		if (ret < 0) {
 			dev_err(chip->dev, "Failed to add touch subdev\n");
 			goto out_dev;

drivers/mfd/max8925-i2c.c

@@ -135,13 +135,37 @@ static const struct i2c_device_id max8925_id_table[] = {
 };
 MODULE_DEVICE_TABLE(i2c, max8925_id_table);
 
+static int max8925_dt_init(struct device_node *np, struct device *dev,
+			   struct max8925_platform_data *pdata)
+{
+	int ret;
+
+	ret = of_property_read_u32(np, "maxim,tsc-irq", &pdata->tsc_irq);
+	if (ret) {
+		dev_err(dev, "Not found maxim,tsc-irq property\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int max8925_probe(struct i2c_client *client,
 				   const struct i2c_device_id *id)
 {
 	struct max8925_platform_data *pdata = client->dev.platform_data;
 	static struct max8925_chip *chip;
+	struct device_node *node = client->dev.of_node;
+
+	if (node && !pdata) {
+		/* parse DT to get platform data */
+		pdata = devm_kzalloc(&client->dev,
+				     sizeof(struct max8925_platform_data),
+				     GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
 
-	if (!pdata) {
+		if (max8925_dt_init(node, &client->dev, pdata))
+			return -EINVAL;
+	} else if (!pdata) {
 		pr_info("%s: platform data is missing\n", __func__);
 		return -EINVAL;
 	}
@@ -203,11 +227,18 @@ static int max8925_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(max8925_pm_ops, max8925_suspend, max8925_resume);
 
+static const struct of_device_id max8925_dt_ids[] = {
+	{ .compatible = "maxim,max8925", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, max8925_dt_ids);
+
 static struct i2c_driver max8925_driver = {
 	.driver	= {
 		.name	= "max8925",
 		.owner	= THIS_MODULE,
 		.pm     = &max8925_pm_ops,
+		.of_match_table = of_match_ptr(max8925_dt_ids),
 	},
 	.probe		= max8925_probe,
 	.remove		= max8925_remove,
@@ -217,7 +248,6 @@ static struct i2c_driver max8925_driver = {
 static int __init max8925_i2c_init(void)
 {
 	int ret;
-
 	ret = i2c_add_driver(&max8925_driver);
 	if (ret != 0)
 		pr_err("Failed to register MAX8925 I2C driver: %d\n", ret);

drivers/mfd/palmas.c

@@ -39,6 +39,14 @@ enum palmas_ids {
 	PALMAS_USB_ID,
 };
 
+static struct resource palmas_rtc_resources[] = {
+	{
+		.start  = PALMAS_RTC_ALARM_IRQ,
+		.end    = PALMAS_RTC_ALARM_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
 static const struct mfd_cell palmas_children[] = {
 	{
 		.name = "palmas-pmic",
@@ -59,6 +67,8 @@ static const struct mfd_cell palmas_children[] = {
 	{
 		.name = "palmas-rtc",
 		.id = PALMAS_RTC_ID,
+		.resources = &palmas_rtc_resources[0],
+		.num_resources = ARRAY_SIZE(palmas_rtc_resources),
 	},
 	{
 		.name = "palmas-pwrbutton",
@@ -456,8 +466,8 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 
 	ret = mfd_add_devices(palmas->dev, -1,
 			      children, ARRAY_SIZE(palmas_children),
-			      NULL, regmap_irq_chip_get_base(palmas->irq_data),
-			      NULL);
+			      NULL, 0,
+			      regmap_irq_get_domain(palmas->irq_data));
 	kfree(children);
 
 	if (ret < 0)

drivers/mfd/rtl8411.c

@@ -115,14 +115,24 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
 static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 {
 	u8 mask, val;
+	int err;
 
 	mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
-	if (voltage == OUTPUT_3V3)
+	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_register(pcr,
+				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D);
+		if (err < 0)
+			return err;
 		val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
-	else if (voltage == OUTPUT_1V8)
+	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_register(pcr,
+				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
+		if (err < 0)
+			return err;
 		val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
-	else
+	} else {
 		return -EINVAL;
+	}
 
 	return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
 }

drivers/mfd/rts5209.c

@@ -149,10 +149,18 @@ static int rts5209_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 	int err;
 
 	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_register(pcr,
+				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D);
+		if (err < 0)
+			return err;
 		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
 		if (err < 0)
 			return err;
 	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_register(pcr,
+				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
+		if (err < 0)
+			return err;
 		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
 		if (err < 0)
 			return err;

drivers/mfd/rts5229.c

@@ -119,10 +119,18 @@ static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 	int err;
 
 	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_register(pcr,
+				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D);
+		if (err < 0)
+			return err;
 		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
 		if (err < 0)
 			return err;
 	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_register(pcr,
+				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
+		if (err < 0)
+			return err;
 		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
 		if (err < 0)
 			return err;

drivers/mfd/rtsx_pcr.h

@@ -25,8 +25,12 @@
 
 #include <linux/mfd/rtsx_pci.h>
 
+#define MIN_DIV_N_PCR		80
+#define MAX_DIV_N_PCR		208
+
 void rts5209_init_params(struct rtsx_pcr *pcr);
 void rts5229_init_params(struct rtsx_pcr *pcr);
 void rtl8411_init_params(struct rtsx_pcr *pcr);
+void rts5227_init_params(struct rtsx_pcr *pcr);
 
 #endif

drivers/mfd/syscon.c

@@ -20,6 +20,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 static struct platform_driver syscon_driver;