Commit ab9b32ee authored by Andi Kleen's avatar Andi Kleen Committed by Linus Torvalds

[PATCH] x86_64: Better ATI timer fix

The previous experiment for using apicmaintimer on ATI systems didn't
work out very well.  In particular laptops with C2/C3 support often
don't let it tick during idle, which makes it useless.  There were also
some other bugs that made the apicmaintimer often not used at all.

I tried some other experiments - running timer over RTC and some other
things but they didn't really work well neither.

I rechecked the specs now and it turns out this simple change is
actually enough to avoid the double ticks on the ATI systems.  We just
turn off IRQ 0 in the 8254 and only route it directly using the IO-APIC.

I tested it on a few ATI systems and it worked there.  In fact it worked
on all chipsets (NVidia, Intel, AMD, ATI) I tried it on.

According to the ACPI spec routing should always work through the
IO-APIC so I think it's the correct thing to do anyways (and most of the
old gunk in check_timer should be thrown away for x86-64).

But for 2.6.16 it's best to do a fairly minimal change:
 - Use the known to be working everywhere-but-ATI IRQ0 both over 8254
   and IO-APIC setup everywhere
 - Except on ATI disable IRQ0 in the 8254
 - Remove the code to select apicmaintimer on ATI chipsets
 - Add some boot options to allow to override this (just paranoia)

In 2.6.17 I hope to switch the default over to this for everybody.
Signed-off-by: default avatarAndi Kleen <ak@suse.de>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent e8b91777
......@@ -52,6 +52,10 @@ APICs
apicmaintimer. Useful when your PIT timer is totally
broken.
disable_8254_timer / enable_8254_timer
Enable interrupt 0 timer routing over the 8254 in addition to over
the IO-APIC. The kernel tries to set a sensible default.
Early Console
syntax: earlyprintk=vga
......
......@@ -50,6 +50,8 @@ static int no_timer_check;
int disable_timer_pin_1 __initdata;
int timer_over_8254 __initdata = 1;
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
......@@ -251,6 +253,20 @@ static int __init enable_ioapic_setup(char *str)
__setup("noapic", disable_ioapic_setup);
__setup("apic", enable_ioapic_setup);
static int __init setup_disable_8254_timer(char *s)
{
timer_over_8254 = -1;
return 1;
}
static int __init setup_enable_8254_timer(char *s)
{
timer_over_8254 = 2;
return 1;
}
__setup("disable_8254_timer", setup_disable_8254_timer);
__setup("enable_8254_timer", setup_enable_8254_timer);
#include <asm/pci-direct.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
......@@ -309,27 +325,20 @@ void __init check_ioapic(void)
#endif
/* RED-PEN skip them on mptables too? */
return;
/* This should be actually default, but
for 2.6.16 let's do it for ATI only where
it's really needed. */
case PCI_VENDOR_ID_ATI:
if (apic_runs_main_timer != 0)
break;
#ifdef CONFIG_ACPI
/* Don't do this for laptops right
right now because their timer
doesn't necessarily tick in C2/3 */
if (acpi_fadt.revision >= 3 &&
(acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) {
if (timer_over_8254 == 1) {
timer_over_8254 = 0;
printk(KERN_INFO
"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n");
break;
"ATI board detected. Disabling timer routing over 8254.\n");
}
#endif
printk(KERN_INFO
"ATI board detected. Using APIC/PM timer.\n");
apic_runs_main_timer = 1;
nohpet = 1;
return;
}
/* No multi-function device? */
type = read_pci_config_byte(num,slot,func,
PCI_HEADER_TYPE);
......@@ -1773,6 +1782,8 @@ static inline void unlock_ExtINT_logic(void)
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
*
* FIXME: really need to revamp this for modern platforms only.
*/
static inline void check_timer(void)
{
......@@ -1795,6 +1806,7 @@ static inline void check_timer(void)
*/
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
if (timer_over_8254 > 0)
enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment