Merge branch 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  pci/of: Consolidate pci_bus_to_OF_node()
  pci/of: Consolidate pci_device_to_OF_node()
  x86/devicetree: Use generic PCI <-> OF matching
  microblaze/pci: Move the remains of pci_32.c to pci-common.c
  microblaze/pci: Remove powermac originated cruft
  pci/of: Match PCI devices to OF nodes dynamically

arch/microblaze/include/asm/pci-bridge.h

@@ -19,9 +19,6 @@ enum {
 	 */
 	PCI_REASSIGN_ALL_RSRC	= 0x00000001,
 
-	/* Re-assign all bus numbers */
-	PCI_REASSIGN_ALL_BUS	= 0x00000002,
-
 	/* Do not try to assign, just use existing setup */
 	PCI_PROBE_ONLY		= 0x00000004,
 
@@ -110,16 +107,6 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
 	return bus->sysdata;
 }
 
-static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
-{
-	struct pci_controller *host;
-
-	if (bus->self)
-		return pci_device_to_OF_node(bus->self);
-	host = pci_bus_to_host(bus);
-	return host ? host->dn : NULL;
-}
-
 static inline int isa_vaddr_is_ioport(void __iomem *address)
 {
 	/* No specific ISA handling on ppc32 at this stage, it

arch/microblaze/include/asm/pci.h

@@ -40,8 +40,7 @@ struct pci_dev;
  * Set this to 1 if you want the kernel to re-assign all PCI
  * bus numbers (don't do that on ppc64 yet !)
  */
-#define pcibios_assign_all_busses() \
-	(pci_has_flag(PCI_REASSIGN_ALL_BUS))
+#define pcibios_assign_all_busses()	0
 
 static inline void pcibios_set_master(struct pci_dev *dev)
 {

arch/microblaze/include/asm/prom.h

@@ -29,21 +29,6 @@
 extern int early_uartlite_console(void);
 extern int early_uart16550_console(void);
 
-#ifdef CONFIG_PCI
-/*
- * PCI <-> OF matching functions
- * (XXX should these be here?)
- */
-struct pci_bus;
-struct pci_dev;
-extern int pci_device_from_OF_node(struct device_node *node,
-					u8 *bus, u8 *devfn);
-extern struct device_node *pci_busdev_to_OF_node(struct pci_bus *bus,
-							int devfn);
-extern struct device_node *pci_device_to_OF_node(struct pci_dev *dev);
-extern void pci_create_OF_bus_map(void);
-#endif
-
 /*
  * OF address retreival & translation
  */

arch/microblaze/pci/Makefile

@@ -2,5 +2,5 @@
 # Makefile
 #
 
-obj-$(CONFIG_PCI)		+= pci_32.o pci-common.o indirect_pci.o iomap.o
+obj-$(CONFIG_PCI)		+= pci-common.o indirect_pci.o iomap.o
 obj-$(CONFIG_PCI_XILINX)	+= xilinx_pci.o

arch/microblaze/pci/pci-common.c

@@ -50,6 +50,11 @@ unsigned int pci_flags;
 
 static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
 
+unsigned long isa_io_base;
+unsigned long pci_dram_offset;
+static int pci_bus_count;
+
+
 void set_pci_dma_ops(struct dma_map_ops *dma_ops)
 {
 	pci_dma_ops = dma_ops;
@@ -1558,6 +1563,112 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 }
 
+struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	return of_node_get(hose->dn);
+}
+
+static void __devinit pcibios_scan_phb(struct pci_controller *hose)
+{
+	struct pci_bus *bus;
+	struct device_node *node = hose->dn;
+	unsigned long io_offset;
+	struct resource *res = &hose->io_resource;
+
+	pr_debug("PCI: Scanning PHB %s\n",
+		 node ? node->full_name : "<NO NAME>");
+
+	/* Create an empty bus for the toplevel */
+	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
+	if (bus == NULL) {
+		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
+		       hose->global_number);
+		return;
+	}
+	bus->secondary = hose->first_busno;
+	hose->bus = bus;
+
+	/* Fixup IO space offset */
+	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+	res->start = (res->start + io_offset) & 0xffffffffu;
+	res->end = (res->end + io_offset) & 0xffffffffu;
+
+	/* Wire up PHB bus resources */
+	pcibios_setup_phb_resources(hose);
+
+	/* Scan children */
+	hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
+
+static int __init pcibios_init(void)
+{
+	struct pci_controller *hose, *tmp;
+	int next_busno = 0;
+
+	printk(KERN_INFO "PCI: Probing PCI hardware\n");
+
+	/* Scan all of the recorded PCI controllers.  */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		hose->last_busno = 0xff;
+		pcibios_scan_phb(hose);
+		printk(KERN_INFO "calling pci_bus_add_devices()\n");
+		pci_bus_add_devices(hose->bus);
+		if (next_busno <= hose->last_busno)
+			next_busno = hose->last_busno + 1;
+	}
+	pci_bus_count = next_busno;
+
+	/* Call common code to handle resource allocation */
+	pcibios_resource_survey();
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static struct pci_controller *pci_bus_to_hose(int bus)
+{
+	struct pci_controller *hose, *tmp;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+		if (bus >= hose->first_busno && bus <= hose->last_busno)
+			return hose;
+	return NULL;
+}
+
+/* Provide information on locations of various I/O regions in physical
+ * memory.  Do this on a per-card basis so that we choose the right
+ * root bridge.
+ * Note that the returned IO or memory base is a physical address
+ */
+
+long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
+{
+	struct pci_controller *hose;
+	long result = -EOPNOTSUPP;
+
+	hose = pci_bus_to_hose(bus);
+	if (!hose)
+		return -ENODEV;
+
+	switch (which) {
+	case IOBASE_BRIDGE_NUMBER:
+		return (long)hose->first_busno;
+	case IOBASE_MEMORY:
+		return (long)hose->pci_mem_offset;
+	case IOBASE_IO:
+		return (long)hose->io_base_phys;
+	case IOBASE_ISA_IO:
+		return (long)isa_io_base;
+	case IOBASE_ISA_MEM:
+		return (long)isa_mem_base;
+	}
+
+	return result;
+}
+
 /*
  * Null PCI config access functions, for the case when we can't
  * find a hose.
@@ -1626,3 +1737,4 @@ int early_find_capability(struct pci_controller *hose, int bus, int devfn,
 {
 	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
 }
+

arch/microblaze/pci/pci_32.c

-/*
- * Common pmac/prep/chrp pci routines. -- Cort
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/pci-bridge.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-
-#undef DEBUG
-
-unsigned long isa_io_base;
-unsigned long pci_dram_offset;
-int pcibios_assign_bus_offset = 1;
-
-static u8 *pci_to_OF_bus_map;
-
-/* By default, we don't re-assign bus numbers. We do this only on
- * some pmacs
- */
-static int pci_assign_all_buses;
-
-static int pci_bus_count;
-
-/*
- * Functions below are used on OpenFirmware machines.
- */
-static void
-make_one_node_map(struct device_node *node, u8 pci_bus)
-{
-	const int *bus_range;
-	int len;
-
-	if (pci_bus >= pci_bus_count)
-		return;
-	bus_range = of_get_property(node, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, "
-		       "assuming it starts at 0\n", node->full_name);
-		pci_to_OF_bus_map[pci_bus] = 0;
-	} else
-		pci_to_OF_bus_map[pci_bus] = bus_range[0];
-
-	for_each_child_of_node(node, node) {
-		struct pci_dev *dev;
-		const unsigned int *class_code, *reg;
-
-		class_code = of_get_property(node, "class-code", NULL);
-		if (!class_code ||
-			((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
-			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
-			continue;
-		reg = of_get_property(node, "reg", NULL);
-		if (!reg)
-			continue;
-		dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
-		if (!dev || !dev->subordinate) {
-			pci_dev_put(dev);
-			continue;
-		}
-		make_one_node_map(node, dev->subordinate->number);
-		pci_dev_put(dev);
-	}
-}
-
-void
-pcibios_make_OF_bus_map(void)
-{
-	int i;
-	struct pci_controller *hose, *tmp;
-	struct property *map_prop;
-	struct device_node *dn;
-
-	pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
-	if (!pci_to_OF_bus_map) {
-		printk(KERN_ERR "Can't allocate OF bus map !\n");
-		return;
-	}
-
-	/* We fill the bus map with invalid values, that helps
-	 * debugging.
-	 */
-	for (i = 0; i < pci_bus_count; i++)
-		pci_to_OF_bus_map[i] = 0xff;
-
-	/* For each hose, we begin searching bridges */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		struct device_node *node = hose->dn;
-
-		if (!node)
-			continue;
-		make_one_node_map(node, hose->first_busno);
-	}
-	dn = of_find_node_by_path("/");
-	map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
-	if (map_prop) {
-		BUG_ON(pci_bus_count > map_prop->length);
-		memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
-	}
-	of_node_put(dn);
-#ifdef DEBUG
-	printk(KERN_INFO "PCI->OF bus map:\n");
-	for (i = 0; i < pci_bus_count; i++) {
-		if (pci_to_OF_bus_map[i] == 0xff)
-			continue;
-		printk(KERN_INFO "%d -> %d\n", i, pci_to_OF_bus_map[i]);
-	}
-#endif
-}
-
-typedef int (*pci_OF_scan_iterator)(struct device_node *node, void *data);
-
-static struct device_node *scan_OF_pci_childs(struct device_node *parent,
-					pci_OF_scan_iterator filter, void *data)
-{
-	struct device_node *node;
-	struct device_node *sub_node;
-
-	for_each_child_of_node(parent, node) {
-		const unsigned int *class_code;
-
-		if (filter(node, data)) {
-			of_node_put(node);
-			return node;
-		}
-
-		/* For PCI<->PCI bridges or CardBus bridges, we go down
-		 * Note: some OFs create a parent node "multifunc-device" as
-		 * a fake root for all functions of a multi-function device,
-		 * we go down them as well.
-		 */
-		class_code = of_get_property(node, "class-code", NULL);
-		if ((!class_code ||
-			((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
-			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
-			strcmp(node->name, "multifunc-device"))
-			continue;
-		sub_node = scan_OF_pci_childs(node, filter, data);
-		if (sub_node) {
-			of_node_put(node);
-			return sub_node;
-		}
-	}
-	return NULL;
-}
-
-static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
-					       unsigned int devfn)
-{
-	struct device_node *np, *cnp;
-	const u32 *reg;
-	unsigned int psize;
-
-	for_each_child_of_node(parent, np) {
-		reg = of_get_property(np, "reg", &psize);
-		if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn)
-			return np;
-
-		/* Note: some OFs create a parent node "multifunc-device" as
-		 * a fake root for all functions of a multi-function device,
-		 * we go down them as well. */
-		if (!strcmp(np->name, "multifunc-device")) {
-			cnp = scan_OF_for_pci_dev(np, devfn);
-			if (cnp)
-				return cnp;
-		}
-	}
-	return NULL;
-}
-
-
-static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
-{
-	struct device_node *parent, *np;
-
-	/* Are we a root bus ? */
-	if (bus->self == NULL || bus->parent == NULL) {
-		struct pci_controller *hose = pci_bus_to_host(bus);
-		if (hose == NULL)
-			return NULL;
-		return of_node_get(hose->dn);
-	}
-
-	/* not a root bus, we need to get our parent */
-	parent = scan_OF_for_pci_bus(bus->parent);
-	if (parent == NULL)
-		return NULL;
-
-	/* now iterate for children for a match */
-	np = scan_OF_for_pci_dev(parent, bus->self->devfn);
-	of_node_put(parent);
-
-	return np;
-}
-
-/*
- * Scans the OF tree for a device node matching a PCI device
- */
-struct device_node *
-pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
-{
-	struct device_node *parent, *np;
-
-	pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
-	parent = scan_OF_for_pci_bus(bus);
-	if (parent == NULL)
-		return NULL;
-	pr_debug(" parent is %s\n", parent ? parent->full_name : "<NULL>");
-	np = scan_OF_for_pci_dev(parent, devfn);
-	of_node_put(parent);
-	pr_debug(" result is %s\n", np ? np->full_name : "<NULL>");
-
-	/* XXX most callers don't release the returned node
-	 * mostly because ppc64 doesn't increase the refcount,
-	 * we need to fix that.
-	 */
-	return np;
-}
-EXPORT_SYMBOL(pci_busdev_to_OF_node);
-
-struct device_node*
-pci_device_to_OF_node(struct pci_dev *dev)
-{
-	return pci_busdev_to_OF_node(dev->bus, dev->devfn);
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
-static int
-find_OF_pci_device_filter(struct device_node *node, void *data)
-{
-	return ((void *)node == data);
-}
-
-/*
- * Returns the PCI device matching a given OF node
- */
-int
-pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
-{
-	const unsigned int *reg;
-	struct pci_controller *hose;
-	struct pci_dev *dev = NULL;
-
-	/* Make sure it's really a PCI device */
-	hose = pci_find_hose_for_OF_device(node);
-	if (!hose || !hose->dn)
-		return -ENODEV;
-	if (!scan_OF_pci_childs(hose->dn,
-			find_OF_pci_device_filter, (void *)node))
-		return -ENODEV;
-	reg = of_get_property(node, "reg", NULL);
-	if (!reg)
-		return -ENODEV;
-	*bus = (reg[0] >> 16) & 0xff;
-	*devfn = ((reg[0] >> 8) & 0xff);
-
-	/* Ok, here we need some tweak. If we have already renumbered
-	 * all busses, we can't rely on the OF bus number any more.
-	 * the pci_to_OF_bus_map is not enough as several PCI busses
-	 * may match the same OF bus number.
-	 */
-	if (!pci_to_OF_bus_map)
-		return 0;
-
-	for_each_pci_dev(dev)
-		if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
-				dev->devfn == *devfn) {
-			*bus = dev->bus->number;
-			pci_dev_put(dev);
-			return 0;
-		}
-
-	return -ENODEV;
-}
-EXPORT_SYMBOL(pci_device_from_OF_node);
-
-/* We create the "pci-OF-bus-map" property now so it appears in the
- * /proc device tree
- */
-void __init
-pci_create_OF_bus_map(void)
-{
-	struct property *of_prop;
-	struct device_node *dn;
-
-	of_prop = (struct property *) alloc_bootmem(sizeof(struct property) + \
-									 256);
-	if (!of_prop)
-		return;
-	dn = of_find_node_by_path("/");
-	if (dn) {
-		memset(of_prop, -1, sizeof(struct property) + 256);
-		of_prop->name = "pci-OF-bus-map";
-		of_prop->length = 256;
-		of_prop->value = &of_prop[1];
-		prom_add_property(dn, of_prop);
-		of_node_put(dn);
-	}
-}
-
-static void __devinit pcibios_scan_phb(struct pci_controller *hose)
-{
-	struct pci_bus *bus;
-	struct device_node *node = hose->dn;
-	unsigned long io_offset;
-	struct resource *res = &hose->io_resource;
-
-	pr_debug("PCI: Scanning PHB %s\n",
-		 node ? node->full_name : "<NO NAME>");
-
-	/* Create an empty bus for the toplevel */
-	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
-	if (bus == NULL) {
-		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
-		       hose->global_number);
-		return;
-	}
-	bus.dev->of_node = of_node_get(node);
-	bus->secondary = hose->first_busno;
-	hose->bus = bus;
-
-	/* Fixup IO space offset */
-	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	res->start = (res->start + io_offset) & 0xffffffffu;
-	res->end = (res->end + io_offset) & 0xffffffffu;
-
-	/* Wire up PHB bus resources */
-	pcibios_setup_phb_resources(hose);
-
-	/* Scan children */
-	hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
-}
-
-static int __init pcibios_init(void)
-{
-	struct pci_controller *hose, *tmp;
-	int next_busno = 0;
-
-	printk(KERN_INFO "PCI: Probing PCI hardware\n");
-
-	if (pci_flags & PCI_REASSIGN_ALL_BUS) {
-		printk(KERN_INFO "setting pci_asign_all_busses\n");
-		pci_assign_all_buses = 1;
-	}
-
-	/* Scan all of the recorded PCI controllers.  */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		if (pci_assign_all_buses)
-			hose->first_busno = next_busno;
-		hose->last_busno = 0xff;
-		pcibios_scan_phb(hose);
-		printk(KERN_INFO "calling pci_bus_add_devices()\n");
-		pci_bus_add_devices(hose->bus);
-		if (pci_assign_all_buses || next_busno <= hose->last_busno)
-			next_busno = hose->last_busno + \
-					pcibios_assign_bus_offset;
-	}
-	pci_bus_count = next_busno;
-
-	/* OpenFirmware based machines need a map of OF bus
-	 * numbers vs. kernel bus numbers since we may have to
-	 * remap them.
-	 */
-	if (pci_assign_all_buses)
-		pcibios_make_OF_bus_map();
-
-	/* Call common code to handle resource allocation */
-	pcibios_resource_survey();
-
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-static struct pci_controller*
-pci_bus_to_hose(int bus)
-{
-	struct pci_controller *hose, *tmp;
-
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
-		if (bus >= hose->first_busno && bus <= hose->last_busno)
-			return hose;
-	return NULL;
-}
-
-/* Provide information on locations of various I/O regions in physical
- * memory.  Do this on a per-card basis so that we choose the right
- * root bridge.
- * Note that the returned IO or memory base is a physical address
- */
-
-long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
-{
-	struct pci_controller *hose;
-	long result = -EOPNOTSUPP;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return -ENODEV;
-
-	switch (which) {
-	case IOBASE_BRIDGE_NUMBER:
-		return (long)hose->first_busno;
-	case IOBASE_MEMORY:
-		return (long)hose->pci_mem_offset;
-	case IOBASE_IO:
-		return (long)hose->io_base_phys;
-	case IOBASE_ISA_IO:
-		return (long)isa_io_base;
-	case IOBASE_ISA_MEM:
-		return (long)isa_mem_base;
-	}
-
-	return result;
-}

arch/powerpc/include/asm/pci-bridge.h

@@ -171,15 +171,9 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
 
 #ifndef CONFIG_PPC64
 
-static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
-{
-	struct pci_controller *host;
-
-	if (bus->self)
-		return pci_device_to_OF_node(bus->self);
-	host = pci_bus_to_host(bus);
-	return host ? host->dn : NULL;
-}
+extern int pci_device_from_OF_node(struct device_node *node,
+				   u8 *bus, u8 *devfn);
+extern void pci_create_OF_bus_map(void);
 
 static inline int isa_vaddr_is_ioport(void __iomem *address)
 {
@@ -223,17 +217,8 @@ struct pci_dn {
 /* Get the pointer to a device_node's pci_dn */
 #define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
 
-extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
 extern void * update_dn_pci_info(struct device_node *dn, void *data);
 
-/* Get a device_node from a pci_dev.  This code must be fast except
- * in the case where the sysdata is incorrect and needs to be fixed
- * up (this will only happen once). */
-static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
-{
-	return dev->dev.of_node ? dev->dev.of_node : fetch_dev_dn(dev);
-}
-
 static inline int pci_device_from_OF_node(struct device_node *np,
 					  u8 *bus, u8 *devfn)
 {
@@ -244,14 +229,6 @@ static inline int pci_device_from_OF_node(struct device_node *np,
 	return 0;
 }
 
-static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
-{
-	if (bus->self)
-		return pci_device_to_OF_node(bus->self);
-	else
-		return bus->dev.of_node; /* Must be root bus (PHB) */
-}
-
 /** Find the bus corresponding to the indicated device node */
 extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
 

arch/powerpc/include/asm/pci.h

@@ -179,8 +179,7 @@ extern int remove_phb_dynamic(struct pci_controller *phb);
 extern struct pci_dev *of_create_pci_dev(struct device_node *node,
 					struct pci_bus *bus, int devfn);
 
-extern void of_scan_pci_bridge(struct device_node *node,
-				struct pci_dev *dev);
+extern void of_scan_pci_bridge(struct pci_dev *dev);
 
 extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
 extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);

arch/powerpc/include/asm/prom.h

@@ -22,20 +22,6 @@
 
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-#ifdef CONFIG_PPC32
-/*
- * PCI <-> OF matching functions
- * (XXX should these be here?)
- */
-struct pci_bus;
-struct pci_dev;
-extern int pci_device_from_OF_node(struct device_node *node,
-				   u8* bus, u8* devfn);
-extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
-extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
-extern void pci_create_OF_bus_map(void);
-#endif
-
 /*
  * OF address retreival & translation
  */

arch/powerpc/kernel/pci-common.c

@@ -1097,9 +1097,6 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
 		if (dev->is_added)
 			continue;
 
-		/* Setup OF node pointer in the device */
-		dev->dev.of_node = pci_device_to_OF_node(dev);
-
 		/* Fixup NUMA node as it may not be setup yet by the generic
 		 * code and is needed by the DMA init
 		 */
@@ -1685,6 +1682,13 @@ int early_find_capability(struct pci_controller *hose, int bus, int devfn,
 	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
 }
 
+struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	return of_node_get(hose->dn);
+}
+
 /**
  * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
  * @hose: Pointer to the PCI host controller instance structure
@@ -1705,7 +1709,6 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose)
 			hose->global_number);
 		return;
 	}
-	bus->dev.of_node = of_node_get(node);
 	bus->secondary = hose->first_busno;
 	hose->bus = bus;
 

arch/powerpc/kernel/pci_32.c

@@ -167,150 +167,26 @@ pcibios_make_OF_bus_map(void)
 #endif
 }
 
-typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
-
-static struct device_node*
-scan_OF_pci_childs(struct device_node *parent, pci_OF_scan_iterator filter, void* data)
-{
-	struct device_node *node;
-	struct device_node* sub_node;
-
-	for_each_child_of_node(parent, node) {
-		const unsigned int *class_code;
-	
-		if (filter(node, data)) {
-			of_node_put(node);
-			return node;
-		}
-
-		/* For PCI<->PCI bridges or CardBus bridges, we go down
-		 * Note: some OFs create a parent node "multifunc-device" as
-		 * a fake root for all functions of a multi-function device,
-		 * we go down them as well.
-		 */
-		class_code = of_get_property(node, "class-code", NULL);
-		if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
-			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
-			strcmp(node->name, "multifunc-device"))
-			continue;
-		sub_node = scan_OF_pci_childs(node, filter, data);
-		if (sub_node) {
-			of_node_put(node);
-			return sub_node;
-		}
-	}
-	return NULL;
-}
-
-static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
-					       unsigned int devfn)
-{
-	struct device_node *np, *cnp;
-	const u32 *reg;
-	unsigned int psize;
-
-	for_each_child_of_node(parent, np) {
-		reg = of_get_property(np, "reg", &psize);
-                if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn)
-			return np;
-
-		/* Note: some OFs create a parent node "multifunc-device" as
-		 * a fake root for all functions of a multi-function device,
-		 * we go down them as well. */
-                if (!strcmp(np->name, "multifunc-device")) {
-                        cnp = scan_OF_for_pci_dev(np, devfn);
-                        if (cnp)
-                                return cnp;
-                }
-	}
-	return NULL;
-}
-
-
-static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
-{
-	struct device_node *parent, *np;
-
-	/* Are we a root bus ? */
-	if (bus->self == NULL || bus->parent == NULL) {
-		struct pci_controller *hose = pci_bus_to_host(bus);
-		if (hose == NULL)
-			return NULL;
-		return of_node_get(hose->dn);
-	}
-
-	/* not a root bus, we need to get our parent */
-	parent = scan_OF_for_pci_bus(bus->parent);
-	if (parent == NULL)
-		return NULL;
-
-	/* now iterate for children for a match */
-	np = scan_OF_for_pci_dev(parent, bus->self->devfn);
-	of_node_put(parent);
-
-	return np;
-}
-
-/*
- * Scans the OF tree for a device node matching a PCI device
- */
-struct device_node *
-pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
-{
-	struct device_node *parent, *np;
-
-	pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
-	parent = scan_OF_for_pci_bus(bus);
-	if (parent == NULL)
-		return NULL;
-	pr_debug(" parent is %s\n", parent ? parent->full_name : "<NULL>");
-	np = scan_OF_for_pci_dev(parent, devfn);
-	of_node_put(parent);
-	pr_debug(" result is %s\n", np ? np->full_name : "<NULL>");
-
-	/* XXX most callers don't release the returned node
-	 * mostly because ppc64 doesn't increase the refcount,
-	 * we need to fix that.
-	 */
-	return np;
-}
-EXPORT_SYMBOL(pci_busdev_to_OF_node);
-
-struct device_node*
-pci_device_to_OF_node(struct pci_dev *dev)
-{
-	return pci_busdev_to_OF_node(dev->bus, dev->devfn);
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
-static int
-find_OF_pci_device_filter(struct device_node* node, void* data)
-{
-	return ((void *)node == data);
-}
 
 /*
  * Returns the PCI device matching a given OF node
  */
-int
-pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
+int pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
 {
-	const unsigned int *reg;
-	struct pci_controller* hose;
-	struct pci_dev* dev = NULL;
+	struct pci_dev *dev = NULL;
+	const __be32 *reg;
+	int size;
 
-	/* Make sure it's really a PCI device */
-	hose = pci_find_hose_for_OF_device(node);
-	if (!hose || !hose->dn)
-		return -ENODEV;
-	if (!scan_OF_pci_childs(hose->dn,
-			find_OF_pci_device_filter, (void *)node))
+	/* Check if it might have a chance to be a PCI device */
+	if (!pci_find_hose_for_OF_device(node))
 		return -ENODEV;
-	reg = of_get_property(node, "reg", NULL);
-	if (!reg)
+
+	reg = of_get_property(node, "reg", &size);
+	if (!reg || size < 5 * sizeof(u32))
 		return -ENODEV;
-	*bus = (reg[0] >> 16) & 0xff;
-	*devfn = ((reg[0] >> 8) & 0xff);
+
+	*bus = (be32_to_cpup(&reg[0]) >> 16) & 0xff;
+	*devfn = (be32_to_cpup(&reg[0]) >> 8) & 0xff;
 
 	/* Ok, here we need some tweak. If we have already renumbered
 	 * all busses, we can't rely on the OF bus number any more.

arch/powerpc/kernel/pci_dn.c

@@ -142,53 +142,6 @@ void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb)
 	traverse_pci_devices(dn, update_dn_pci_info, phb);
 }
 
-/*
- * Traversal func that looks for a <busno,devfcn> value.
- * If found, the pci_dn is returned (thus terminating the traversal).
- */
-static void *is_devfn_node(struct device_node *dn, void *data)
-{
-	int busno = ((unsigned long)data >> 8) & 0xff;
-	int devfn = ((unsigned long)data) & 0xff;
-	struct pci_dn *pci = dn->data;
-
-	if (pci && (devfn == pci->devfn) && (busno == pci->busno))
-		return dn;
-	return NULL;
-}
-
-/*
- * This is the "slow" path for looking up a device_node from a
- * pci_dev.  It will hunt for the device under its parent's
- * phb and then update of_node pointer.
- *
- * It may also do fixups on the actual device since this happens
- * on the first read/write.
- *
- * Note that it also must deal with devices that don't exist.
- * In this case it may probe for real hardware ("just in case")
- * and add a device_node to the device tree if necessary.
- *
- * Is this function necessary anymore now that dev->dev.of_node is
- * used to store the node pointer?
- *
- */
-struct device_node *fetch_dev_dn(struct pci_dev *dev)
-{
-	struct pci_controller *phb = dev->sysdata;
-	struct device_node *dn;
-	unsigned long searchval = (dev->bus->number << 8) | dev->devfn;
-
-	if (WARN_ON(!phb))
-		return NULL;
-
-	dn = traverse_pci_devices(phb->dn, is_devfn_node, (void *)searchval);
-	if (dn)
-		dev->dev.of_node = dn;
-	return dn;
-}
-EXPORT_SYMBOL(fetch_dev_dn);
-
 /** 
  * pci_devs_phb_init - Initialize phbs and pci devs under them.
  * 

arch/powerpc/kernel/pci_of_scan.c

@@ -202,9 +202,9 @@ EXPORT_SYMBOL(of_create_pci_dev);
  * this routine in turn call of_scan_bus() recusively to scan for more child
  * devices.
  */
-void __devinit of_scan_pci_bridge(struct device_node *node,
-				  struct pci_dev *dev)
+void __devinit of_scan_pci_bridge(struct pci_dev *dev)
 {
+	struct device_node *node = dev->dev.of_node;
 	struct pci_bus *bus;
 	const u32 *busrange, *ranges;
 	int len, i, mode;
@@ -238,7 +238,6 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
 	bus->primary = dev->bus->number;
 	bus->subordinate = busrange[1];
 	bus->bridge_ctl = 0;
-	bus->dev.of_node = of_node_get(node);
 
 	/* parse ranges property */
 	/* PCI #address-cells == 3 and #size-cells == 2 always */
@@ -335,9 +334,7 @@ static void __devinit __of_scan_bus(struct device_node *node,
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
 		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
-			struct device_node *child = pci_device_to_OF_node(dev);
-			if (child)
-				of_scan_pci_bridge(child, dev);
+			of_scan_pci_bridge(dev);
 		}
 	}
 }

arch/powerpc/platforms/powermac/pci.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/irq.h>
+#include <linux/of_pci.h>
 
 #include <asm/sections.h>
 #include <asm/io.h>
@@ -235,7 +236,7 @@ static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
 
 	if (offset >= 0x100)
 		return  PCIBIOS_BAD_REGISTER_NUMBER;
-	np = pci_busdev_to_OF_node(bus, devfn);
+	np = of_pci_find_child_device(bus->dev.of_node, devfn);
 	if (np == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 

arch/sparc/include/asm/pci_32.h

@@ -42,9 +42,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 }
 #endif
 
-struct device_node;
-extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
-
 #endif /* __KERNEL__ */
 
 #ifndef CONFIG_LEON_PCI

arch/sparc/include/asm/pci_64.h

@@ -91,9 +91,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 	return PCI_IRQ_NONE;
 }
 
-struct device_node;
-extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
-
 #define HAVE_ARCH_PCI_RESOURCE_TO_USER
 extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
 				 const struct resource *rsrc,

arch/sparc/kernel/pci.c

@@ -284,7 +284,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->sysdata = node;
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
-	dev->dev.of_node = node;
+	dev->dev.of_node = of_node_get(node);
 	dev->devfn = devfn;
 	dev->multifunction = 0;		/* maybe a lie? */
 	set_pcie_port_type(dev);
@@ -1021,12 +1021,6 @@ void arch_teardown_msi_irq(unsigned int irq)
 }
 #endif /* !(CONFIG_PCI_MSI) */
 
-struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
-{
-	return pdev->dev.of_node;
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
 {
 	struct pci_dev *ali_isa_bridge;

arch/sparc/kernel/pcic.c

@@ -885,14 +885,6 @@ int pcibios_assign_resource(struct pci_dev *pdev, int resource)
 	return -ENXIO;
 }
 
-struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
-{
-	struct pcidev_cookie *pc = pdev->sysdata;
-
-	return pc->prom_node;
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
 /*
  * This probably belongs here rather than ioport.c because
  * we do not want this crud linked into SBus kernels.

arch/x86/include/asm/prom.h

@@ -30,17 +30,6 @@ extern void add_dtb(u64 data);
 extern void x86_add_irq_domains(void);
 void __cpuinit x86_of_pci_init(void);
 void x86_dtb_init(void);
-
-static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
-{
-	return pdev ? pdev->dev.of_node : NULL;
-}
-
-static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
-{
-	return pci_device_to_OF_node(bus->self);
-}
-
 #else
 static inline void add_dtb(u64 data) { }
 static inline void x86_add_irq_domains(void) { }

arch/x86/kernel/devicetree.c

@@ -134,6 +134,24 @@ static int __init add_bus_probe(void)
 module_init(add_bus_probe);
 
 #ifdef CONFIG_PCI
+struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+	struct device_node *np;
+
+	for_each_node_by_type(np, "pci") {
+		const void *prop;
+		unsigned int bus_min;
+
+		prop = of_get_property(np, "bus-range", NULL);
+		if (!prop)
+			continue;
+		bus_min = be32_to_cpup(prop);
+		if (bus->number == bus_min)
+			return np;
+	}
+	return NULL;
+}
+
 static int x86_of_pci_irq_enable(struct pci_dev *dev)
 {
 	struct of_irq oirq;
@@ -165,50 +183,8 @@ static void x86_of_pci_irq_disable(struct pci_dev *dev)
 
 void __cpuinit x86_of_pci_init(void)
 {
-	struct device_node *np;
-
 	pcibios_enable_irq = x86_of_pci_irq_enable;
 	pcibios_disable_irq = x86_of_pci_irq_disable;
-
-	for_each_node_by_type(np, "pci") {
-		const void *prop;
-		struct pci_bus *bus;
-		unsigned int bus_min;
-		struct device_node *child;
-
-		prop = of_get_property(np, "bus-range", NULL);
-		if (!prop)
-			continue;
-		bus_min = be32_to_cpup(prop);
-
-		bus = pci_find_bus(0, bus_min);
-		if (!bus) {
-			printk(KERN_ERR "Can't find a node for bus %s.\n",
-					np->full_name);
-			continue;
-		}
-
-		if (bus->self)
-			bus->self->dev.of_node = np;
-		else
-			bus->dev.of_node = np;
-
-		for_each_child_of_node(np, child) {
-			struct pci_dev *dev;
-			u32 devfn;
-
-			prop = of_get_property(child, "reg", NULL);
-			if (!prop)
-				continue;
-
-			devfn = (be32_to_cpup(prop) >> 8) & 0xff;
-			dev = pci_get_slot(bus, devfn);
-			if (!dev)
-				continue;
-			dev->dev.of_node = child;
-			pci_dev_put(dev);
-		}
-	}
 }
 #endif
 

drivers/of/Kconfig

@@ -71,8 +71,14 @@ config OF_MDIO
 
 config OF_PCI
 	def_tristate PCI
-	depends on PCI && (PPC || MICROBLAZE || X86)
+	depends on PCI
 	help
 	  OpenFirmware PCI bus accessors
 
+config OF_PCI_IRQ
+	def_tristate PCI
+	depends on OF_PCI && OF_IRQ
+	help
+	  OpenFirmware PCI IRQ routing helpers
+
 endmenu # OF

drivers/of/Makefile

@@ -10,3 +10,4 @@ obj-$(CONFIG_OF_NET)	+= of_net.o
 obj-$(CONFIG_OF_SPI)	+= of_spi.o
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
 obj-$(CONFIG_OF_PCI)	+= of_pci.o
+obj-$(CONFIG_OF_PCI_IRQ)  += of_pci_irq.o

drivers/of/of_pci.c

 #include <linux/kernel.h>
 #include <linux/of_pci.h>
-#include <linux/of_irq.h>
 #include <asm/prom.h>
 
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:       the device whose interrupt is to be resolved
- * @out_irq:    structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+static inline int __of_pci_pci_compare(struct device_node *node,
+				       unsigned int devfn)
 {
-	struct device_node *dn, *ppnode;
-	struct pci_dev *ppdev;
-	u32 lspec;
-	__be32 lspec_be;
-	__be32 laddr[3];
-	u8 pin;
-	int rc;
+	unsigned int size;
+	const __be32 *reg = of_get_property(node, "reg", &size);
 
-	/* Check if we have a device node, if yes, fallback to standard
-	 * device tree parsing
-	 */
-	dn = pci_device_to_OF_node(pdev);
-	if (dn) {
-		rc = of_irq_map_one(dn, 0, out_irq);
-		if (!rc)
-			return rc;
-	}
+	if (!reg || size < 5 * sizeof(__be32))
+		return 0;
+	return ((be32_to_cpup(&reg[0]) >> 8) & 0xff) == devfn;
+}
 
-	/* Ok, we don't, time to have fun. Let's start by building up an
-	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
-	 * for PCI. If you do different, then don't use that routine.
+struct device_node *of_pci_find_child_device(struct device_node *parent,
+					     unsigned int devfn)
+{
+	struct device_node *node, *node2;
+
+	for_each_child_of_node(parent, node) {
+		if (__of_pci_pci_compare(node, devfn))
+			return node;
+		/*
+		 * Some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function
+		 * device we go down them as well.
 		 */
-	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
-	if (rc != 0)
-		return rc;
-	/* No pin, exit */
-	if (pin == 0)
-		return -ENODEV;
-
-	/* Now we walk up the PCI tree */
-	lspec = pin;
-	for (;;) {
-		/* Get the pci_dev of our parent */
-		ppdev = pdev->bus->self;
-
-		/* Ouch, it's a host bridge... */
-		if (ppdev == NULL) {
-			ppnode = pci_bus_to_OF_node(pdev->bus);
-
-			/* No node for host bridge ? give up */
-			if (ppnode == NULL)
-				return -EINVAL;
-		} else {
-			/* We found a P2P bridge, check if it has a node */
-			ppnode = pci_device_to_OF_node(ppdev);
+		if (!strcmp(node->name, "multifunc-device")) {
+			for_each_child_of_node(node, node2) {
+				if (__of_pci_pci_compare(node2, devfn)) {
+					of_node_put(node);
+					return node2;
 				}
-
-		/* Ok, we have found a parent with a device-node, hand over to
-		 * the OF parsing code.
-		 * We build a unit address from the linux device to be used for
-		 * resolution. Note that we use the linux bus number which may
-		 * not match your firmware bus numbering.
-		 * Fortunately, in most cases, interrupt-map-mask doesn't
-		 * include the bus number as part of the matching.
-		 * You should still be careful about that though if you intend
-		 * to rely on this function (you ship  a firmware that doesn't
-		 * create device nodes for all PCI devices).
-		 */
-		if (ppnode)
-			break;
-
-		/* We can only get here if we hit a P2P bridge with no node,
-		 * let's do standard swizzling and try again
-		 */
-		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
-		pdev = ppdev;
 			}
-
-	lspec_be = cpu_to_be32(lspec);
-	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
-	laddr[1]  = laddr[2] = cpu_to_be32(0);
-	return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+		}
+	}
+	return NULL;
 }
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
+EXPORT_SYMBOL_GPL(of_pci_find_child_device);

drivers/of/of_pci_irq.c

+#include <linux/kernel.h>
+#include <linux/of_pci.h>
+#include <linux/of_irq.h>
+#include <asm/prom.h>
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:       the device whose interrupt is to be resolved
+ * @out_irq:    structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+	struct device_node *dn, *ppnode;
+	struct pci_dev *ppdev;
+	u32 lspec;
+	__be32 lspec_be;
+	__be32 laddr[3];
+	u8 pin;
+	int rc;
+
+	/* Check if we have a device node, if yes, fallback to standard
+	 * device tree parsing
+	 */
+	dn = pci_device_to_OF_node(pdev);
+	if (dn) {
+		rc = of_irq_map_one(dn, 0, out_irq);
+		if (!rc)
+			return rc;
+	}
+
+	/* Ok, we don't, time to have fun. Let's start by building up an
+	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
+	 * for PCI. If you do different, then don't use that routine.
+	 */
+	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+	if (rc != 0)
+		return rc;
+	/* No pin, exit */
+	if (pin == 0)
+		return -ENODEV;
+
+	/* Now we walk up the PCI tree */
+	lspec = pin;
+	for (;;) {
+		/* Get the pci_dev of our parent */
+		ppdev = pdev->bus->self;
+
+		/* Ouch, it's a host bridge... */
+		if (ppdev == NULL) {
+			ppnode = pci_bus_to_OF_node(pdev->bus);
+
+			/* No node for host bridge ? give up */
+			if (ppnode == NULL)
+				return -EINVAL;
+		} else {
+			/* We found a P2P bridge, check if it has a node */
+			ppnode = pci_device_to_OF_node(ppdev);
+		}
+
+		/* Ok, we have found a parent with a device-node, hand over to
+		 * the OF parsing code.
+		 * We build a unit address from the linux device to be used for
+		 * resolution. Note that we use the linux bus number which may
+		 * not match your firmware bus numbering.
+		 * Fortunately, in most cases, interrupt-map-mask doesn't
+		 * include the bus number as part of the matching.
+		 * You should still be careful about that though if you intend
+		 * to rely on this function (you ship  a firmware that doesn't
+		 * create device nodes for all PCI devices).
+		 */
+		if (ppnode)
+			break;
+
+		/* We can only get here if we hit a P2P bridge with no node,
+		 * let's do standard swizzling and try again
+		 */
+		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
+		pdev = ppdev;
+	}
+
+	lspec_be = cpu_to_be32(lspec);
+	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
+	laddr[1]  = laddr[2] = cpu_to_be32(0);
+	return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);

drivers/pci/Makefile

@@ -71,4 +71,6 @@ obj-$(CONFIG_PCI_STUB) += pci-stub.o
 
 obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
 
+obj-$(CONFIG_OF) += of.o
+
 ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG

drivers/pci/hotplug/rpadlpar_core.c

@@ -158,7 +158,7 @@ static void dlpar_pci_add_bus(struct device_node *dn)
 	/* Scan below the new bridge */
 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
 	    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
-		of_scan_pci_bridge(dn, dev);
+		of_scan_pci_bridge(dev);
 
 	/* Map IO space for child bus, which may or may not succeed */
 	pcibios_map_io_space(dev->subordinate);

drivers/pci/of.c

+/*
+ * PCI <-> OF mapping helpers
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_pci.h>
+#include "pci.h"
+
+void pci_set_of_node(struct pci_dev *dev)
+{
+	if (!dev->bus->dev.of_node)
+		return;
+	dev->dev.of_node = of_pci_find_child_device(dev->bus->dev.of_node,
+						    dev->devfn);
+}
+
+void pci_release_of_node(struct pci_dev *dev)
+{
+	of_node_put(dev->dev.of_node);
+	dev->dev.of_node = NULL;
+}
+
+void pci_set_bus_of_node(struct pci_bus *bus)
+{
+	if (bus->self == NULL)
+		bus->dev.of_node = pcibios_get_phb_of_node(bus);
+	else
+		bus->dev.of_node = of_node_get(bus->self->dev.of_node);
+}
+
+void pci_release_bus_of_node(struct pci_bus *bus)
+{
+	of_node_put(bus->dev.of_node);
+	bus->dev.of_node = NULL;
+}
+
+struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+	/* This should only be called for PHBs */
+	if (WARN_ON(bus->self || bus->parent))
+		return NULL;
+
+	/* Look for a node pointer in either the intermediary device we
+	 * create above the root bus or it's own parent. Normally only
+	 * the later is populated.
+	 */
+	if (bus->bridge->of_node)
+		return of_node_get(bus->bridge->of_node);
+	if (bus->bridge->parent->of_node)
+		return of_node_get(bus->bridge->parent->of_node);
+	return NULL;
+}

drivers/pci/probe.c

@@ -52,6 +52,7 @@ static void release_pcibus_dev(struct device *dev)
 	if (pci_bus->bridge)
 		put_device(pci_bus->bridge);
 	pci_bus_remove_resources(pci_bus);
+	pci_release_bus_of_node(pci_bus);
 	kfree(pci_bus);
 }
 
@@ -588,7 +589,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->self = bridge;
 	child->bridge = get_device(&bridge->dev);
-
+	pci_set_bus_of_node(child);
 	pci_set_bus_speed(child);
 
 	/* Set up default resource pointers and names.. */
@@ -1038,6 +1039,7 @@ static void pci_release_dev(struct device *dev)
 
 	pci_dev = to_pci_dev(dev);
 	pci_release_capabilities(pci_dev);
+	pci_release_of_node(pci_dev);
 	kfree(pci_dev);
 }
 
@@ -1157,6 +1159,8 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 	dev->vendor = l & 0xffff;
 	dev->device = (l >> 16) & 0xffff;
 
+	pci_set_of_node(dev);
+
 	if (pci_setup_device(dev)) {
 		kfree(dev);
 		return NULL;
@@ -1409,6 +1413,7 @@ struct pci_bus * pci_create_bus(struct device *parent,
 		goto dev_reg_err;
 	b->bridge = get_device(dev);
 	device_enable_async_suspend(b->bridge);
+	pci_set_bus_of_node(b);
 
 	if (!parent)
 		set_dev_node(b->bridge, pcibus_to_node(b));

include/linux/of_pci.h

@@ -6,4 +6,9 @@
 struct pci_dev;
 struct of_irq;
 int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+struct device_node;
+struct device_node *of_pci_find_child_device(struct device_node *parent,
+					     unsigned int devfn);
+
 #endif

include/linux/pci.h

@@ -1589,5 +1589,33 @@ int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt);
 int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
 			      unsigned int len, const char *kw);
 
+/* PCI <-> OF binding helpers */
+#ifdef CONFIG_OF
+struct device_node;
+extern void pci_set_of_node(struct pci_dev *dev);
+extern void pci_release_of_node(struct pci_dev *dev);
+extern void pci_set_bus_of_node(struct pci_bus *bus);
+extern void pci_release_bus_of_node(struct pci_bus *bus);
+
+/* Arch may override this (weak) */
+extern struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus);
+
+static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
+{
+	return pdev ? pdev->dev.of_node : NULL;
+}
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	return bus ? bus->dev.of_node : NULL;
+}
+
+#else /* CONFIG_OF */
+static inline void pci_set_of_node(struct pci_dev *dev) { }
+static inline void pci_release_of_node(struct pci_dev *dev) { }
+static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
+static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
+#endif  /* CONFIG_OF */
+
 #endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */