rt2x00: fix whitespace damage in the rt2800 specific code

The rt2800 specific code contains a lots of whitespace damage caused by
the commit 'rt2x00: Add support for RT5390 chip'.

This patch fixes those whitespace errors.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -1614,7 +1614,8 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 
 	rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
 	if (rt2x00dev->freq_offset > RT5390_FREQ_OFFSET_BOUND)
-               rt2x00_set_field8(&rfcsr, RFCSR17_CODE, RT5390_FREQ_OFFSET_BOUND);
+		rt2x00_set_field8(&rfcsr, RFCSR17_CODE,
+				  RT5390_FREQ_OFFSET_BOUND);
 	else
 		rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
 	rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
@@ -1633,8 +1634,10 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 					0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
 					0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
 
-                               rt2800_rfcsr_write(rt2x00dev, 55, r55_bt_rev[idx]);
-                               rt2800_rfcsr_write(rt2x00dev, 59, r59_bt_rev[idx]);
+				rt2800_rfcsr_write(rt2x00dev, 55,
+						   r55_bt_rev[idx]);
+				rt2800_rfcsr_write(rt2x00dev, 59,
+						   r59_bt_rev[idx]);
 			} else {
 				static const char r59_bt[] = {0x8b, 0x8b, 0x8b,
 					0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
@@ -1651,14 +1654,17 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 					0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
 					0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
 
-                               rt2800_rfcsr_write(rt2x00dev, 55, r55_nonbt_rev[idx]);
-                               rt2800_rfcsr_write(rt2x00dev, 59, r59_nonbt_rev[idx]);
+				rt2800_rfcsr_write(rt2x00dev, 55,
+						   r55_nonbt_rev[idx]);
+				rt2800_rfcsr_write(rt2x00dev, 59,
+						   r59_nonbt_rev[idx]);
 			} else if (rt2x00_rt(rt2x00dev, RT5390)) {
 				static const char r59_non_bt[] = {0x8f, 0x8f,
 					0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
 					0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
 
-                               rt2800_rfcsr_write(rt2x00dev, 59, r59_non_bt[idx]);
+				rt2800_rfcsr_write(rt2x00dev, 59,
+						   r59_non_bt[idx]);
 			}
 		}
 	}
@@ -1712,7 +1718,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 
 	if (rf->channel <= 14) {
 		if (!rt2x00_rt(rt2x00dev, RT5390)) {
-                       if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+			if (test_bit(CONFIG_EXTERNAL_LNA_BG,
+				     &rt2x00dev->flags)) {
 				rt2800_bbp_write(rt2x00dev, 82, 0x62);
 				rt2800_bbp_write(rt2x00dev, 75, 0x46);
 			} else {
@@ -2728,7 +2735,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 		int ant, div_mode;
 
 		rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
-               div_mode = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_ANT_DIVERSITY);
+		div_mode = rt2x00_get_field16(eeprom,
+					      EEPROM_NIC_CONF1_ANT_DIVERSITY);
 		ant = (div_mode == 3) ? 1 : 0;
 
 		/* check if this is a Bluetooth combo card */
@@ -3129,7 +3137,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 		    rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
 		    rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
 		    rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
-                       if (!test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+			if (!test_bit(CONFIG_EXTERNAL_LNA_BG,
+				      &rt2x00dev->flags))
 				rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
 		}
 		rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);