Merge remote-tracking branches 'spi/topic/a3700', 'spi/topic/atmel',...

Merge remote-tracking branches 'spi/topic/a3700', 'spi/topic/atmel', 'spi/topic/bcm53xx', 'spi/topic/davinci' and 'spi/topic/dw' into spi-next

drivers/spi/spi-armada-3700.c

@@ -27,6 +27,8 @@
 
 #define DRIVER_NAME			"armada_3700_spi"
 
+#define A3700_SPI_MAX_SPEED_HZ		100000000
+#define A3700_SPI_MAX_PRESCALE		30
 #define A3700_SPI_TIMEOUT		10
 
 /* SPI Register Offest */
@@ -184,12 +186,15 @@ static int a3700_spi_pin_mode_set(struct a3700_spi *a3700_spi,
 	return 0;
 }
 
-static void a3700_spi_fifo_mode_set(struct a3700_spi *a3700_spi)
+static void a3700_spi_fifo_mode_set(struct a3700_spi *a3700_spi, bool enable)
 {
 	u32 val;
 
 	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+	if (enable)
 		val |= A3700_SPI_FIFO_MODE;
+	else
+		val &= ~A3700_SPI_FIFO_MODE;
 	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
 }
 
@@ -297,7 +302,7 @@ static int a3700_spi_init(struct a3700_spi *a3700_spi)
 		a3700_spi_deactivate_cs(a3700_spi, i);
 
 	/* Enable FIFO mode */
-	a3700_spi_fifo_mode_set(a3700_spi);
+	a3700_spi_fifo_mode_set(a3700_spi, true);
 
 	/* Set SPI mode */
 	a3700_spi_mode_set(a3700_spi, master->mode_bits);
@@ -416,15 +421,20 @@ static void a3700_spi_transfer_setup(struct spi_device *spi,
 				     struct spi_transfer *xfer)
 {
 	struct a3700_spi *a3700_spi;
-	unsigned int byte_len;
 
 	a3700_spi = spi_master_get_devdata(spi->master);
 
 	a3700_spi_clock_set(a3700_spi, xfer->speed_hz);
 
-	byte_len = xfer->bits_per_word >> 3;
+	/* Use 4 bytes long transfers. Each transfer method has its way to deal
+	 * with the remaining bytes for non 4-bytes aligned transfers.
+	 */
+	a3700_spi_bytelen_set(a3700_spi, 4);
 
-	a3700_spi_fifo_thres_set(a3700_spi, byte_len);
+	/* Initialize the working buffers */
+	a3700_spi->tx_buf  = xfer->tx_buf;
+	a3700_spi->rx_buf  = xfer->rx_buf;
+	a3700_spi->buf_len = xfer->len;
 }
 
 static void a3700_spi_set_cs(struct spi_device *spi, bool enable)
@@ -491,7 +501,7 @@ static int a3700_spi_fifo_write(struct a3700_spi *a3700_spi)
 	u32 val;
 
 	while (!a3700_is_wfifo_full(a3700_spi) && a3700_spi->buf_len) {
-		val = cpu_to_le32(*(u32 *)a3700_spi->tx_buf);
+		val = *(u32 *)a3700_spi->tx_buf;
 		spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val);
 		a3700_spi->buf_len -= 4;
 		a3700_spi->tx_buf += 4;
@@ -514,9 +524,8 @@ static int a3700_spi_fifo_read(struct a3700_spi *a3700_spi)
 	while (!a3700_is_rfifo_empty(a3700_spi) && a3700_spi->buf_len) {
 		val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG);
 		if (a3700_spi->buf_len >= 4) {
-			u32 data = le32_to_cpu(val);
 
-			memcpy(a3700_spi->rx_buf, &data, 4);
+			memcpy(a3700_spi->rx_buf, &val, 4);
 
 			a3700_spi->buf_len -= 4;
 			a3700_spi->rx_buf += 4;
@@ -579,27 +588,26 @@ static int a3700_spi_prepare_message(struct spi_master *master,
 	if (ret)
 		return ret;
 
-	a3700_spi_bytelen_set(a3700_spi, 4);
-
 	a3700_spi_mode_set(a3700_spi, spi->mode);
 
 	return 0;
 }
 
-static int a3700_spi_transfer_one(struct spi_master *master,
+static int a3700_spi_transfer_one_fifo(struct spi_master *master,
 				  struct spi_device *spi,
 				  struct spi_transfer *xfer)
 {
 	struct a3700_spi *a3700_spi = spi_master_get_devdata(master);
 	int ret = 0, timeout = A3700_SPI_TIMEOUT;
-	unsigned int nbits = 0;
+	unsigned int nbits = 0, byte_len;
 	u32 val;
 
-	a3700_spi_transfer_setup(spi, xfer);
+	/* Make sure we use FIFO mode */
+	a3700_spi_fifo_mode_set(a3700_spi, true);
 
-	a3700_spi->tx_buf  = xfer->tx_buf;
-	a3700_spi->rx_buf  = xfer->rx_buf;
-	a3700_spi->buf_len = xfer->len;
+	/* Configure FIFO thresholds */
+	byte_len = xfer->bits_per_word >> 3;
+	a3700_spi_fifo_thres_set(a3700_spi, byte_len);
 
 	if (xfer->tx_buf)
 		nbits = xfer->tx_nbits;
@@ -615,6 +623,11 @@ static int a3700_spi_transfer_one(struct spi_master *master,
 	a3700_spi_header_set(a3700_spi);
 
 	if (xfer->rx_buf) {
+		/* Clear WFIFO, since it's last 2 bytes are shifted out during
+		 * a read operation
+		 */
+		spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, 0);
+
 		/* Set read data length */
 		spireg_write(a3700_spi, A3700_SPI_IF_DIN_CNT_REG,
 			     a3700_spi->buf_len);
@@ -729,6 +742,63 @@ static int a3700_spi_transfer_one(struct spi_master *master,
 	return ret;
 }
 
+static int a3700_spi_transfer_one_full_duplex(struct spi_master *master,
+				  struct spi_device *spi,
+				  struct spi_transfer *xfer)
+{
+	struct a3700_spi *a3700_spi = spi_master_get_devdata(master);
+	u32 val;
+
+	/* Disable FIFO mode */
+	a3700_spi_fifo_mode_set(a3700_spi, false);
+
+	while (a3700_spi->buf_len) {
+
+		/* When we have less than 4 bytes to transfer, switch to 1 byte
+		 * mode. This is reset after each transfer
+		 */
+		if (a3700_spi->buf_len < 4)
+			a3700_spi_bytelen_set(a3700_spi, 1);
+
+		if (a3700_spi->byte_len == 1)
+			val = *a3700_spi->tx_buf;
+		else
+			val = *(u32 *)a3700_spi->tx_buf;
+
+		spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val);
+
+		/* Wait for all the data to be shifted in / out */
+		while (!(spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG) &
+				A3700_SPI_XFER_DONE))
+			cpu_relax();
+
+		val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG);
+
+		memcpy(a3700_spi->rx_buf, &val, a3700_spi->byte_len);
+
+		a3700_spi->buf_len -= a3700_spi->byte_len;
+		a3700_spi->tx_buf += a3700_spi->byte_len;
+		a3700_spi->rx_buf += a3700_spi->byte_len;
+
+	}
+
+	spi_finalize_current_transfer(master);
+
+	return 0;
+}
+
+static int a3700_spi_transfer_one(struct spi_master *master,
+				  struct spi_device *spi,
+				  struct spi_transfer *xfer)
+{
+	a3700_spi_transfer_setup(spi, xfer);
+
+	if (xfer->tx_buf && xfer->rx_buf)
+		return a3700_spi_transfer_one_full_duplex(master, spi, xfer);
+
+	return a3700_spi_transfer_one_fifo(master, spi, xfer);
+}
+
 static int a3700_spi_unprepare_message(struct spi_master *master,
 				       struct spi_message *message)
 {
@@ -778,7 +848,6 @@ static int a3700_spi_probe(struct platform_device *pdev)
 	master->transfer_one = a3700_spi_transfer_one;
 	master->unprepare_message = a3700_spi_unprepare_message;
 	master->set_cs = a3700_spi_set_cs;
-	master->flags = SPI_MASTER_HALF_DUPLEX;
 	master->mode_bits |= (SPI_RX_DUAL | SPI_TX_DUAL |
 			      SPI_RX_QUAD | SPI_TX_QUAD);
 
@@ -818,6 +887,11 @@ static int a3700_spi_probe(struct platform_device *pdev)
 		goto error;
 	}
 
+	master->max_speed_hz = min_t(unsigned long, A3700_SPI_MAX_SPEED_HZ,
+					clk_get_rate(spi->clk));
+	master->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk),
+						A3700_SPI_MAX_PRESCALE);
+
 	ret = a3700_spi_init(spi);
 	if (ret)
 		goto error_clk;

drivers/spi/spi-atmel.c

@@ -291,6 +291,10 @@ struct atmel_spi {
 	struct spi_transfer	*current_transfer;
 	int			current_remaining_bytes;
 	int			done_status;
+	dma_addr_t		dma_addr_rx_bbuf;
+	dma_addr_t		dma_addr_tx_bbuf;
+	void			*addr_rx_bbuf;
+	void			*addr_tx_bbuf;
 
 	struct completion	xfer_completion;
 
@@ -436,6 +440,11 @@ static void atmel_spi_unlock(struct atmel_spi *as) __releases(&as->lock)
 	spin_unlock_irqrestore(&as->lock, as->flags);
 }
 
+static inline bool atmel_spi_is_vmalloc_xfer(struct spi_transfer *xfer)
+{
+	return is_vmalloc_addr(xfer->tx_buf) || is_vmalloc_addr(xfer->rx_buf);
+}
+
 static inline bool atmel_spi_use_dma(struct atmel_spi *as,
 				struct spi_transfer *xfer)
 {
@@ -448,7 +457,12 @@ static bool atmel_spi_can_dma(struct spi_master *master,
 {
 	struct atmel_spi *as = spi_master_get_devdata(master);
 
+	if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5))
+		return atmel_spi_use_dma(as, xfer) &&
+			!atmel_spi_is_vmalloc_xfer(xfer);
+	else
 		return atmel_spi_use_dma(as, xfer);
+
 }
 
 static int atmel_spi_dma_slave_config(struct atmel_spi *as,
@@ -594,6 +608,11 @@ static void dma_callback(void *data)
 	struct spi_master	*master = data;
 	struct atmel_spi	*as = spi_master_get_devdata(master);
 
+	if (is_vmalloc_addr(as->current_transfer->rx_buf) &&
+	    IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+		memcpy(as->current_transfer->rx_buf, as->addr_rx_bbuf,
+		       as->current_transfer->len);
+	}
 	complete(&as->xfer_completion);
 }
 
@@ -744,17 +763,41 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
 		goto err_exit;
 
 	/* Send both scatterlists */
+	if (atmel_spi_is_vmalloc_xfer(xfer) &&
+	    IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+		rxdesc = dmaengine_prep_slave_single(rxchan,
+						     as->dma_addr_rx_bbuf,
+						     xfer->len,
+						     DMA_FROM_DEVICE,
+						     DMA_PREP_INTERRUPT |
+						     DMA_CTRL_ACK);
+	} else {
 		rxdesc = dmaengine_prep_slave_sg(rxchan,
-					 xfer->rx_sg.sgl, xfer->rx_sg.nents,
+						 xfer->rx_sg.sgl,
+						 xfer->rx_sg.nents,
 						 DMA_FROM_DEVICE,
-					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+						 DMA_PREP_INTERRUPT |
+						 DMA_CTRL_ACK);
+	}
 	if (!rxdesc)
 		goto err_dma;
 
+	if (atmel_spi_is_vmalloc_xfer(xfer) &&
+	    IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+		memcpy(as->addr_tx_bbuf, xfer->tx_buf, xfer->len);
+		txdesc = dmaengine_prep_slave_single(txchan,
+						     as->dma_addr_tx_bbuf,
+						     xfer->len, DMA_TO_DEVICE,
+						     DMA_PREP_INTERRUPT |
+						     DMA_CTRL_ACK);
+	} else {
 		txdesc = dmaengine_prep_slave_sg(txchan,
-					 xfer->tx_sg.sgl, xfer->tx_sg.nents,
+						 xfer->tx_sg.sgl,
+						 xfer->tx_sg.nents,
 						 DMA_TO_DEVICE,
-					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+						 DMA_PREP_INTERRUPT |
+						 DMA_CTRL_ACK);
+	}
 	if (!txdesc)
 		goto err_dma;
 
@@ -1426,27 +1469,7 @@ static void atmel_get_caps(struct atmel_spi *as)
 
 	as->caps.is_spi2 = version > 0x121;
 	as->caps.has_wdrbt = version >= 0x210;
-#ifdef CONFIG_SOC_SAM_V4_V5
-	/*
-	 * Atmel SoCs based on ARM9 (SAM9x) cores should not use spi_map_buf()
-	 * since this later function tries to map buffers with dma_map_sg()
-	 * even if they have not been allocated inside DMA-safe areas.
-	 * On SoCs based on Cortex A5 (SAMA5Dx), it works anyway because for
-	 * those ARM cores, the data cache follows the PIPT model.
-	 * Also the L2 cache controller of SAMA5D2 uses the PIPT model too.
-	 * In case of PIPT caches, there cannot be cache aliases.
-	 * However on ARM9 cores, the data cache follows the VIVT model, hence
-	 * the cache aliases issue can occur when buffers are allocated from
-	 * DMA-unsafe areas, by vmalloc() for instance, where cache coherency is
-	 * not taken into account or at least not handled completely (cache
-	 * lines of aliases are not invalidated).
-	 * This is not a theorical issue: it was reproduced when trying to mount
-	 * a UBI file-system on a at91sam9g35ek board.
-	 */
-	as->caps.has_dma_support = false;
-#else
 	as->caps.has_dma_support = version >= 0x212;
-#endif
 	as->caps.has_pdc_support = version < 0x212;
 }
 
@@ -1592,6 +1615,30 @@ static int atmel_spi_probe(struct platform_device *pdev)
 		as->use_pdc = true;
 	}
 
+	if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+		as->addr_rx_bbuf = dma_alloc_coherent(&pdev->dev,
+						      SPI_MAX_DMA_XFER,
+						      &as->dma_addr_rx_bbuf,
+						      GFP_KERNEL | GFP_DMA);
+		if (!as->addr_rx_bbuf) {
+			as->use_dma = false;
+		} else {
+			as->addr_tx_bbuf = dma_alloc_coherent(&pdev->dev,
+					SPI_MAX_DMA_XFER,
+					&as->dma_addr_tx_bbuf,
+					GFP_KERNEL | GFP_DMA);
+			if (!as->addr_tx_bbuf) {
+				as->use_dma = false;
+				dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
+						  as->addr_rx_bbuf,
+						  as->dma_addr_rx_bbuf);
+			}
+		}
+		if (!as->use_dma)
+			dev_info(master->dev.parent,
+				 "  can not allocate dma coherent memory\n");
+	}
+
 	if (as->caps.has_dma_support && !as->use_dma)
 		dev_info(&pdev->dev, "Atmel SPI Controller using PIO only\n");
 
@@ -1664,6 +1711,14 @@ static int atmel_spi_remove(struct platform_device *pdev)
 	if (as->use_dma) {
 		atmel_spi_stop_dma(master);
 		atmel_spi_release_dma(master);
+		if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
+			dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
+					  as->addr_tx_bbuf,
+					  as->dma_addr_tx_bbuf);
+			dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
+					  as->addr_rx_bbuf,
+					  as->dma_addr_rx_bbuf);
+		}
 	}
 
 	spin_lock_irq(&as->lock);

drivers/spi/spi-bcm53xx.c

@@ -27,8 +27,6 @@ struct bcm53xxspi {
 	struct bcma_device *core;
 	struct spi_master *master;
 	void __iomem *mmio_base;
-
-	size_t read_offset;
 	bool bspi;				/* Boot SPI mode with memory mapping */
 };
 
@@ -172,8 +170,6 @@ static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
 
 	if (!cont)
 		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-
-	b53spi->read_offset = len;
 }
 
 static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
@@ -182,10 +178,10 @@ static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
 	u32 tmp;
 	int i;
 
-	for (i = 0; i < b53spi->read_offset + len; i++) {
+	for (i = 0; i < len; i++) {
 		tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
 		      B53SPI_CDRAM_PCS_DSCK;
-		if (!cont && i == b53spi->read_offset + len - 1)
+		if (!cont && i == len - 1)
 			tmp &= ~B53SPI_CDRAM_CONT;
 		tmp &= ~0x1;
 		/* Command Register File */
@@ -194,8 +190,7 @@ static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
 
 	/* Set queue pointers */
 	bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
-	bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
-			 b53spi->read_offset + len - 1);
+	bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
 
 	if (cont)
 		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
@@ -214,13 +209,11 @@ static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
 		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
 
 	for (i = 0; i < len; ++i) {
-		int offset = b53spi->read_offset + i;
+		u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
 
 		/* Data stored in the transmit register file LSB */
-		r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
+		r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
 	}
-
-	b53spi->read_offset = 0;
 }
 
 static int bcm53xxspi_transfer_one(struct spi_master *master,
@@ -238,7 +231,8 @@ static int bcm53xxspi_transfer_one(struct spi_master *master,
 		left = t->len;
 		while (left) {
 			size_t to_write = min_t(size_t, 16, left);
-			bool cont = left - to_write > 0;
+			bool cont = !spi_transfer_is_last(master, t) ||
+				    left - to_write > 0;
 
 			bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
 			left -= to_write;
@@ -250,9 +244,9 @@ static int bcm53xxspi_transfer_one(struct spi_master *master,
 		buf = (u8 *)t->rx_buf;
 		left = t->len;
 		while (left) {
-			size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
-					       left);
-			bool cont = left - to_read > 0;
+			size_t to_read = min_t(size_t, 16, left);
+			bool cont = !spi_transfer_is_last(master, t) ||
+				    left - to_read > 0;
 
 			bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
 			left -= to_read;

drivers/spi/spi-davinci.c

@@ -945,6 +945,8 @@ static int davinci_spi_probe(struct platform_device *pdev)
 		goto free_master;
 	}
 
+	init_completion(&dspi->done);
+
 	ret = platform_get_irq(pdev, 0);
 	if (ret == 0)
 		ret = -EINVAL;
@@ -1021,8 +1023,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	dspi->get_rx = davinci_spi_rx_buf_u8;
 	dspi->get_tx = davinci_spi_tx_buf_u8;
 
-	init_completion(&dspi->done);
-
 	/* Reset In/OUT SPI module */
 	iowrite32(0, dspi->base + SPIGCR0);
 	udelay(100);

drivers/spi/spi-dw.c

@@ -30,13 +30,11 @@
 
 /* Slave spi_dev related */
 struct chip_data {
-	u8 cs;			/* chip select pin */
 	u8 tmode;		/* TR/TO/RO/EEPROM */
 	u8 type;		/* SPI/SSP/MicroWire */
 
 	u8 poll_mode;		/* 1 means use poll mode */
 
-	u8 enable_dma;
 	u16 clk_div;		/* baud rate divider */
 	u32 speed_hz;		/* baud rate */
 	void (*cs_control)(u32 command);