Commit af667a29 authored by Bruce Allan's avatar Bruce Allan Committed by Jeff Kirsher

e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs

Some minor comment errors and whitespace issues discovered while looking
into this are also addressed.
Signed-off-by: default avatarBruce Allan <bruce.w.allan@intel.com>
Tested-by: default avatarJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 0d6057e4
......@@ -1310,7 +1310,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
* apply workaround for hardware errata documented in errata
* docs Fixes issue where some error prone or unreliable PCIe
* completions are occurring, particularly with ASPM enabled.
* Without fix, issue can cause tx timeouts.
* Without fix, issue can cause Tx timeouts.
*/
reg = er32(GCR2);
reg |= 1;
......
......@@ -102,7 +102,7 @@ enum e1e_registers {
E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */
E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */
#define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8))
E1000_RADV = 0x0282C, /* RX Interrupt Absolute Delay Timer - RW */
E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */
/* Convenience macros
*
......
......@@ -533,7 +533,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
mac->autoneg_failed = 1;
return 0;
}
e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
/* Disable auto-negotiation in the TXCW register */
ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
......@@ -556,7 +556,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
* and disable forced link in the Device Control register
* in an attempt to auto-negotiate with our link partner.
*/
e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
ew32(TXCW, mac->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
......@@ -598,7 +598,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
mac->autoneg_failed = 1;
return 0;
}
e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
/* Disable auto-negotiation in the TXCW register */
ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
......@@ -621,7 +621,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
* and disable forced link in the Device Control register
* in an attempt to auto-negotiate with our link partner.
*/
e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
ew32(TXCW, mac->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
......@@ -1189,7 +1189,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
} else {
hw->fc.current_mode = e1000_fc_rx_pause;
e_dbg("Flow Control = "
"RX PAUSE frames only.\r\n");
"Rx PAUSE frames only.\r\n");
}
}
/*
......
......@@ -99,7 +99,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = {
/* Interrupt Registers */
{E1000_ICR, "ICR"},
/* RX Registers */
/* Rx Registers */
{E1000_RCTL, "RCTL"},
{E1000_RDLEN, "RDLEN"},
{E1000_RDH, "RDH"},
......@@ -115,7 +115,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = {
{E1000_RDFTS, "RDFTS"},
{E1000_RDFPC, "RDFPC"},
/* TX Registers */
/* Tx Registers */
{E1000_TCTL, "TCTL"},
{E1000_TDBAL, "TDBAL"},
{E1000_TDBAH, "TDBAH"},
......@@ -171,9 +171,8 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
printk(KERN_CONT "\n");
}
/*
* e1000e_dump - Print registers, tx-ring and rx-ring
* e1000e_dump - Print registers, Tx-ring and Rx-ring
*/
static void e1000e_dump(struct e1000_adapter *adapter)
{
......@@ -182,12 +181,20 @@ static void e1000e_dump(struct e1000_adapter *adapter)
struct e1000_reg_info *reginfo;
struct e1000_ring *tx_ring = adapter->tx_ring;
struct e1000_tx_desc *tx_desc;
struct my_u0 { u64 a; u64 b; } *u0;
struct my_u0 {
u64 a;
u64 b;
} *u0;
struct e1000_buffer *buffer_info;
struct e1000_ring *rx_ring = adapter->rx_ring;
union e1000_rx_desc_packet_split *rx_desc_ps;
struct e1000_rx_desc *rx_desc;
struct my_u1 { u64 a; u64 b; u64 c; u64 d; } *u1;
struct my_u1 {
u64 a;
u64 b;
u64 c;
u64 d;
} *u1;
u32 staterr;
int i = 0;
......@@ -200,9 +207,7 @@ static void e1000e_dump(struct e1000_adapter *adapter)
printk(KERN_INFO "Device Name state "
"trans_start last_rx\n");
printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
netdev->name,
netdev->state,
netdev->trans_start,
netdev->name, netdev->state, netdev->trans_start,
netdev->last_rx);
}
......@@ -214,11 +219,11 @@ static void e1000e_dump(struct e1000_adapter *adapter)
e1000_regdump(hw, reginfo);
}
/* Print TX Ring Summary */
/* Print Tx Ring Summary */
if (!netdev || !netif_running(netdev))
goto exit;
dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
" leng ntw timestamp\n");
buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
......@@ -229,11 +234,11 @@ static void e1000e_dump(struct e1000_adapter *adapter)
buffer_info->next_to_watch,
(unsigned long long)buffer_info->time_stamp);
/* Print TX Rings */
/* Print Tx Ring */
if (!netif_msg_tx_done(adapter))
goto rx_ring_summary;
dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
/* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
*
......@@ -277,8 +282,8 @@ static void e1000e_dump(struct e1000_adapter *adapter)
u0 = (struct my_u0 *)tx_desc;
printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX "
"%04X %3X %016llX %p",
(!(le64_to_cpu(u0->b) & (1<<29)) ? 'l' :
((le64_to_cpu(u0->b) & (1<<20)) ? 'd' : 'c')), i,
(!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i,
(unsigned long long)le64_to_cpu(u0->a),
(unsigned long long)le64_to_cpu(u0->b),
(unsigned long long)buffer_info->dma,
......@@ -300,18 +305,18 @@ static void e1000e_dump(struct e1000_adapter *adapter)
buffer_info->length, true);
}
/* Print RX Rings Summary */
/* Print Rx Ring Summary */
rx_ring_summary:
dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
printk(KERN_INFO "Queue [NTU] [NTC]\n");
printk(KERN_INFO " %5d %5X %5X\n", 0,
rx_ring->next_to_use, rx_ring->next_to_clean);
/* Print RX Rings */
/* Print Rx Ring */
if (!netif_msg_rx_status(adapter))
goto exit;
dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
switch (adapter->rx_ps_pages) {
case 1:
case 2:
......@@ -422,7 +427,8 @@ static void e1000e_dump(struct e1000_adapter *adapter)
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
DUMP_PREFIX_ADDRESS,
16, 1, phys_to_virt(buffer_info->dma),
16, 1,
phys_to_virt(buffer_info->dma),
adapter->rx_buffer_len, true);
}
}
......@@ -450,8 +456,7 @@ static int e1000_desc_unused(struct e1000_ring *ring)
* @skb: pointer to sk_buff to be indicated to stack
**/
static void e1000_receive_skb(struct e1000_adapter *adapter,
struct net_device *netdev,
struct sk_buff *skb,
struct net_device *netdev, struct sk_buff *skb,
u8 status, __le16 vlan)
{
skb->protocol = eth_type_trans(skb, netdev);
......@@ -464,7 +469,7 @@ static void e1000_receive_skb(struct e1000_adapter *adapter,
}
/**
* e1000_rx_checksum - Receive Checksum Offload for 82543
* e1000_rx_checksum - Receive Checksum Offload
* @adapter: board private structure
* @status_err: receive descriptor status and error fields
* @csum: receive descriptor csum field
......@@ -548,7 +553,7 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
adapter->rx_buffer_len,
DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
dev_err(&pdev->dev, "RX DMA map failed\n");
dev_err(&pdev->dev, "Rx DMA map failed\n");
adapter->rx_dma_failed++;
break;
}
......@@ -601,7 +606,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
ps_page = &buffer_info->ps_pages[j];
if (j >= adapter->rx_ps_pages) {
/* all unused desc entries get hw null ptr */
rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
rx_desc->read.buffer_addr[j + 1] =
~cpu_to_le64(0);
continue;
}
if (!ps_page->page) {
......@@ -617,7 +623,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
if (dma_mapping_error(&pdev->dev,
ps_page->dma)) {
dev_err(&adapter->pdev->dev,
"RX DMA page map failed\n");
"Rx DMA page map failed\n");
adapter->rx_dma_failed++;
goto no_buffers;
}
......@@ -627,7 +633,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
* didn't change because each write-back
* erases this info.
*/
rx_desc->read.buffer_addr[j+1] =
rx_desc->read.buffer_addr[j + 1] =
cpu_to_le64(ps_page->dma);
}
......@@ -644,7 +650,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
adapter->rx_ps_bsize0,
DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
dev_err(&pdev->dev, "RX DMA map failed\n");
dev_err(&pdev->dev, "Rx DMA map failed\n");
adapter->rx_dma_failed++;
/* cleanup skb */
dev_kfree_skb_any(skb);
......@@ -662,7 +668,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
* such as IA-64).
*/
wmb();
writel(i<<1, adapter->hw.hw_addr + rx_ring->tail);
writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
}
i++;
......@@ -1106,11 +1112,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
cleaned = 1;
cleaned_count++;
dma_unmap_single(&pdev->dev, buffer_info->dma,
adapter->rx_ps_bsize0,
DMA_FROM_DEVICE);
adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
buffer_info->dma = 0;
/* see !EOP comment in other rx routine */
/* see !EOP comment in other Rx routine */
if (!(staterr & E1000_RXD_STAT_EOP))
adapter->flags2 |= FLAG2_IS_DISCARDING;
......@@ -2610,7 +2615,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
}
/**
* e1000_configure_tx - Configure 8254x Transmit Unit after Reset
* e1000_configure_tx - Configure Transmit Unit after Reset
* @adapter: board private structure
*
* Configure the Tx unit of the MAC after a reset.
......@@ -2663,7 +2668,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
* hthresh = 1 ==> prefetch when one or more available
* pthresh = 0x1f ==> prefetch if internal cache 31 or less
* BEWARE: this seems to work but should be considered first if
* there are tx hangs or other tx related bugs
* there are Tx hangs or other Tx related bugs
*/
txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
ew32(TXDCTL(0), txdctl);
......@@ -2900,7 +2905,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
/*
* set the writeback threshold (only takes effect if the RDTR
* is set). set GRAN=1 and write back up to 0x4 worth, and
* enable prefetching of 0x20 rx descriptors
* enable prefetching of 0x20 Rx descriptors
* granularity = 01
* wthresh = 04,
* hthresh = 04,
......@@ -2981,11 +2986,9 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
* excessive C-state transition latencies result in
* dropped transactions.
*/
pm_qos_update_request(
&adapter->netdev->pm_qos_req, 55);
pm_qos_update_request(&adapter->netdev->pm_qos_req, 55);
} else {
pm_qos_update_request(
&adapter->netdev->pm_qos_req,
pm_qos_update_request(&adapter->netdev->pm_qos_req,
PM_QOS_DEFAULT_VALUE);
}
}
......@@ -3152,7 +3155,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
/* lower 16 bits has Rx packet buffer allocation size in KB */
pba &= 0xffff;
/*
* the Tx fifo also stores 16 bytes of information about the tx
* the Tx fifo also stores 16 bytes of information about the Tx
* but don't include ethernet FCS because hardware appends it
*/
min_tx_space = (adapter->max_frame_size +
......@@ -3175,7 +3178,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
pba -= min_tx_space - tx_space;
/*
* if short on Rx space, Rx wins and must trump tx
* if short on Rx space, Rx wins and must trump Tx
* adjustment or use Early Receive if available
*/
if ((pba < min_rx_space) &&
......@@ -4041,9 +4044,9 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
(adapter->link_duplex == FULL_DUPLEX) ?
"Full Duplex" : "Half Duplex",
((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
"RX/TX" :
((ctrl & E1000_CTRL_RFCE) ? "RX" :
((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
"Rx/Tx" :
((ctrl & E1000_CTRL_RFCE) ? "Rx" :
((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None")));
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
......@@ -4338,7 +4341,7 @@ static void e1000_watchdog_task(struct work_struct *work)
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = 1;
/* flush partial descriptors to memory before detecting tx hang */
/* flush partial descriptors to memory before detecting Tx hang */
if (adapter->flags2 & FLAG2_DMA_BURST) {
ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
......@@ -4576,7 +4579,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
}
}
segs = skb_shinfo(skb)->gso_segs ?: 1;
segs = skb_shinfo(skb)->gso_segs ? : 1;
/* multiply data chunks by size of headers */
bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
......@@ -4588,13 +4591,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
return count;
dma_error:
dev_err(&pdev->dev, "TX DMA map failed\n");
dev_err(&pdev->dev, "Tx DMA map failed\n");
buffer_info->dma = 0;
if (count)
count--;
while (count--) {
if (i==0)
if (i == 0)
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
......
......@@ -62,10 +62,9 @@ MODULE_PARM_DESC(copybreak,
module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
/*
* Transmit Interrupt Delay in units of 1.024 microseconds
* Tx interrupt delay needs to typically be set to something non zero
* Tx interrupt delay needs to typically be set to something non-zero
*
* Valid Range: 0-65535
*/
......@@ -112,6 +111,7 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define DEFAULT_ITR 3
#define MAX_ITR 100000
#define MIN_ITR 100
/* IntMode (Interrupt Mode)
*
* Valid Range: 0 - 2
......
......@@ -640,7 +640,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
/* Enable CRS on TX. This must be set for half-duplex operation. */
/* Enable CRS on Tx. This must be set for half-duplex operation. */
ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
if (ret_val)
goto out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment