Commit afe7e363 authored by Robin Murphy's avatar Robin Murphy Committed by Mark Brown

spi: bcm2835: Micro-optimise IRQ handler

The IRQ handler only needs the struct spi_controller for the sake of
the completion at the end of a transfer. Passing the struct bcm2835_spi
directly as the IRQ data allows that level of indirection to be pushed
into the completion path for the reverse lookup, and avoided entirely
in all other cases.

This saves one explicit load in the critical path, plus (for a GCC 8.3
build) two registers worth of stack frame overhead.
Signed-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/6b401cb521539caffab21f05b4c8cba6c9d27c6e.1592261248.git.robin.murphy@arm.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent ac4648b5
......@@ -86,6 +86,7 @@ MODULE_PARM_DESC(polling_limit_us,
* @clk: core clock, divided to calculate serial clock
* @irq: interrupt, signals TX FIFO empty or RX FIFO ¾ full
* @tfr: SPI transfer currently processed
* @ctlr: SPI controller reverse lookup
* @tx_buf: pointer whence next transmitted byte is read
* @rx_buf: pointer where next received byte is written
* @tx_len: remaining bytes to transmit
......@@ -125,6 +126,7 @@ struct bcm2835_spi {
struct clk *clk;
int irq;
struct spi_transfer *tfr;
struct spi_controller *ctlr;
const u8 *tx_buf;
u8 *rx_buf;
int tx_len;
......@@ -362,8 +364,7 @@ static void bcm2835_spi_reset_hw(struct bcm2835_spi *bs)
static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
{
struct spi_controller *ctlr = dev_id;
struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
struct bcm2835_spi *bs = dev_id;
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
/*
......@@ -387,7 +388,7 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
/* Transfer complete - reset SPI HW */
bcm2835_spi_reset_hw(bs);
/* wake up the framework */
complete(&ctlr->xfer_completion);
complete(&bs->ctlr->xfer_completion);
}
return IRQ_HANDLED;
......@@ -1310,6 +1311,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
ctlr->dev.of_node = pdev->dev.of_node;
bs = spi_controller_get_devdata(ctlr);
bs->ctlr = ctlr;
bs->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(bs->regs)) {
......@@ -1344,7 +1346,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
dev_name(&pdev->dev), ctlr);
dev_name(&pdev->dev), bs);
if (err) {
dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
goto out_dma_release;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment