Commit b07175dc authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:
 "Another round of 'allOf' removals and whitespace clean-ups of schemas"

* tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Remove more cases of 'allOf' containing a '$ref'
  dt-bindings: Whitespace clean-ups in schema files
parents 341323fa 5f0b06da
......@@ -67,9 +67,9 @@ patternProperties:
compatible:
items:
- enum:
- arm,integrator-ap-syscon
- arm,integrator-cp-syscon
- arm,integrator-sp-syscon
- arm,integrator-ap-syscon
- arm,integrator-cp-syscon
- arm,integrator-sp-syscon
- const: syscon
reg:
maxItems: 1
......
......@@ -55,20 +55,20 @@ properties:
compatible:
oneOf:
- items:
- const: arm,realview-eb-soc
- const: simple-bus
- const: arm,realview-eb-soc
- const: simple-bus
- items:
- const: arm,realview-pb1176-soc
- const: simple-bus
- const: arm,realview-pb1176-soc
- const: simple-bus
- items:
- const: arm,realview-pb11mp-soc
- const: simple-bus
- const: arm,realview-pb11mp-soc
- const: simple-bus
- items:
- const: arm,realview-pba8-soc
- const: simple-bus
- const: arm,realview-pba8-soc
- const: simple-bus
- items:
- const: arm,realview-pbx-soc
- const: simple-bus
- const: arm,realview-pbx-soc
- const: simple-bus
patternProperties:
"^.*syscon@[0-9a-f]+$":
......@@ -79,35 +79,35 @@ properties:
compatible:
oneOf:
- items:
- const: arm,realview-eb11mp-revb-syscon
- const: arm,realview-eb-syscon
- const: syscon
- const: simple-mfd
- const: arm,realview-eb11mp-revb-syscon
- const: arm,realview-eb-syscon
- const: syscon
- const: simple-mfd
- items:
- const: arm,realview-eb11mp-revc-syscon
- const: arm,realview-eb-syscon
- const: syscon
- const: simple-mfd
- const: arm,realview-eb11mp-revc-syscon
- const: arm,realview-eb-syscon
- const: syscon
- const: simple-mfd
- items:
- const: arm,realview-eb-syscon
- const: syscon
- const: simple-mfd
- const: arm,realview-eb-syscon
- const: syscon
- const: simple-mfd
- items:
- const: arm,realview-pb1176-syscon
- const: syscon
- const: simple-mfd
- const: arm,realview-pb1176-syscon
- const: syscon
- const: simple-mfd
- items:
- const: arm,realview-pb11mp-syscon
- const: syscon
- const: simple-mfd
- const: arm,realview-pb11mp-syscon
- const: syscon
- const: simple-mfd
- items:
- const: arm,realview-pba8-syscon
- const: syscon
- const: simple-mfd
- const: arm,realview-pba8-syscon
- const: syscon
- const: simple-mfd
- items:
- const: arm,realview-pbx-syscon
- const: syscon
- const: simple-mfd
- const: arm,realview-pbx-syscon
- const: syscon
- const: simple-mfd
required:
- compatible
......
......@@ -165,10 +165,10 @@ patternProperties:
compatible:
oneOf:
- items:
- enum:
- arm,vexpress,v2m-p1
- arm,vexpress,v2p-p1
- const: simple-bus
- enum:
- arm,vexpress,v2m-p1
- arm,vexpress,v2p-p1
- const: simple-bus
- const: simple-bus
motherboard:
type: object
......@@ -186,8 +186,8 @@ patternProperties:
compatible:
items:
- enum:
- arm,vexpress,v2m-p1
- arm,vexpress,v2p-p1
- arm,vexpress,v2m-p1
- arm,vexpress,v2p-p1
- const: simple-bus
arm,v2m-memory-map:
description: This describes the memory map type.
......
......@@ -15,7 +15,7 @@ properties:
compatible:
items:
- enum:
- brcm,bcm28155-ap
- brcm,bcm28155-ap
- const: brcm,bcm11351
...
......@@ -15,7 +15,7 @@ properties:
compatible:
items:
- enum:
- brcm,bcm21664-garnet
- brcm,bcm21664-garnet
- const: brcm,bcm21664
...
......@@ -15,7 +15,7 @@ properties:
compatible:
items:
- enum:
- brcm,bcm23550-sparrow
- brcm,bcm23550-sparrow
- const: brcm,bcm23550
...
......@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom Cygnus device tree bindings
maintainers:
- Ray Jui <rjui@broadcom.com>
- Scott Branden <sbranden@broadcom.com>
- Ray Jui <rjui@broadcom.com>
- Scott Branden <sbranden@broadcom.com>
properties:
$nodename:
......@@ -16,14 +16,14 @@ properties:
compatible:
items:
- enum:
- brcm,bcm11300
- brcm,bcm11320
- brcm,bcm11350
- brcm,bcm11360
- brcm,bcm58300
- brcm,bcm58302
- brcm,bcm58303
- brcm,bcm58305
- brcm,bcm11300
- brcm,bcm11320
- brcm,bcm11350
- brcm,bcm11360
- brcm,bcm58300
- brcm,bcm58302
- brcm,bcm58303
- brcm,bcm58305
- const: brcm,cygnus
...
......@@ -21,7 +21,7 @@ properties:
compatible:
items:
- enum:
- ubnt,unifi-switch8
- ubnt,unifi-switch8
- const: brcm,bcm53342
- const: brcm,hr2
......
......@@ -16,8 +16,8 @@ properties:
compatible:
items:
- enum:
- brcm,ns2-svk
- brcm,ns2-xmc
- brcm,ns2-svk
- brcm,ns2-xmc
- const: brcm,ns2
...
......@@ -24,13 +24,13 @@ properties:
compatible:
items:
- enum:
- brcm,bcm58522
- brcm,bcm58525
- brcm,bcm58535
- brcm,bcm58622
- brcm,bcm58623
- brcm,bcm58625
- brcm,bcm88312
- brcm,bcm58522
- brcm,bcm58525
- brcm,bcm58535
- brcm,bcm58622
- brcm,bcm58623
- brcm,bcm58625
- brcm,bcm88312
- const: brcm,nsp
...
......@@ -16,9 +16,9 @@ properties:
compatible:
items:
- enum:
- brcm,bcm958742k
- brcm,bcm958742t
- brcm,bcm958802a802x
- brcm,bcm958742k
- brcm,bcm958742t
- brcm,bcm958802a802x
- const: brcm,stingray
...
......@@ -15,8 +15,8 @@ properties:
compatible:
items:
- enum:
- brcm,vulcan-eval
- cavium,thunderx2-cn9900
- brcm,vulcan-eval
- cavium,thunderx2-cn9900
- const: brcm,vulcan-soc
...
......@@ -82,12 +82,12 @@ properties:
compatible:
oneOf:
- items:
- const: arm,coresight-cti
- const: arm,primecell
- const: arm,coresight-cti
- const: arm,primecell
- items:
- const: arm,coresight-cti-v8-arch
- const: arm,coresight-cti
- const: arm,primecell
- const: arm,coresight-cti-v8-arch
- const: arm,coresight-cti
- const: arm,primecell
reg:
maxItems: 1
......@@ -191,16 +191,16 @@ patternProperties:
anyOf:
- required:
- arm,trig-in-sigs
- arm,trig-in-sigs
- required:
- arm,trig-out-sigs
- arm,trig-out-sigs
oneOf:
- required:
- arm,trig-conn-name
- arm,trig-conn-name
- required:
- cpu
- cpu
- required:
- arm,cs-dev-assoc
- arm,cs-dev-assoc
required:
- reg
......
......@@ -330,8 +330,8 @@ if:
- enable-method
then:
required:
- secondary-boot-reg
required:
- secondary-boot-reg
required:
- device_type
......
......@@ -273,8 +273,8 @@ properties:
- fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
- kontron,imx6ull-n6411-som # Kontron N6411 SOM
- myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
- toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board
- toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
- toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board
- toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
- const: fsl,imx6ull
- description: Kontron N6411 S Board
......@@ -312,9 +312,12 @@ properties:
- toradex,colibri-imx7d # Colibri iMX7 Dual Module
- toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board
- toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
- toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
- toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
- toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
- toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on
# Aster Carrier Board
- toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on
# Colibri Evaluation Board V3
- toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on
# Colibri Evaluation Board V3
- tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
- zii,imx7d-rmu2 # ZII RMU2 Board
- zii,imx7d-rpu2 # ZII RPU2 Board
......
......@@ -14,6 +14,6 @@ properties:
compatible:
items:
- enum:
- intel,keembay-evm
- intel,keembay-evm
- const: intel,keembay
...
......@@ -17,22 +17,22 @@ properties:
compatible:
oneOf:
- items:
- enum:
- mediatek,mt2701-pericfg
- mediatek,mt2712-pericfg
- mediatek,mt6765-pericfg
- mediatek,mt7622-pericfg
- mediatek,mt7629-pericfg
- mediatek,mt8135-pericfg
- mediatek,mt8173-pericfg
- mediatek,mt8183-pericfg
- mediatek,mt8516-pericfg
- const: syscon
- enum:
- mediatek,mt2701-pericfg
- mediatek,mt2712-pericfg
- mediatek,mt6765-pericfg
- mediatek,mt7622-pericfg
- mediatek,mt7629-pericfg
- mediatek,mt8135-pericfg
- mediatek,mt8173-pericfg
- mediatek,mt8183-pericfg
- mediatek,mt8516-pericfg
- const: syscon
- items:
# Special case for mt7623 for backward compatibility
- const: mediatek,mt7623-pericfg
- const: mediatek,mt2701-pericfg
- const: syscon
# Special case for mt7623 for backward compatibility
- const: mediatek,mt7623-pericfg
- const: mediatek,mt2701-pericfg
- const: syscon
reg:
maxItems: 1
......
......@@ -19,7 +19,7 @@ description: |
reported to the APB terminator (APB Errors Handler Block).
allOf:
- $ref: /schemas/simple-bus.yaml#
- $ref: /schemas/simple-bus.yaml#
properties:
compatible:
......
......@@ -23,7 +23,7 @@ description: |
accessible by means of the Baikal-T1 System Controller.
allOf:
- $ref: /schemas/simple-bus.yaml#
- $ref: /schemas/simple-bus.yaml#
properties:
compatible:
......
......@@ -95,10 +95,10 @@ allOf:
# Devices without builtin crystal
properties:
clock-names:
minItems: 1
maxItems: 2
items:
enum: [ xin, clkin ]
minItems: 1
maxItems: 2
items:
enum: [ xin, clkin ]
clocks:
minItems: 1
maxItems: 2
......
......@@ -47,12 +47,12 @@ properties:
compatible:
items:
- enum:
- ingenic,jz4740-cgu
- ingenic,jz4725b-cgu
- ingenic,jz4770-cgu
- ingenic,jz4780-cgu
- ingenic,x1000-cgu
- ingenic,x1830-cgu
- ingenic,jz4740-cgu
- ingenic,jz4725b-cgu
- ingenic,jz4770-cgu
- ingenic,jz4780-cgu
- ingenic,x1000-cgu
- ingenic,x1830-cgu
- const: simple-mfd
minItems: 1
......@@ -68,8 +68,8 @@ properties:
items:
- const: ext
- enum:
- rtc
- osc32k # Different name, same clock
- rtc
- osc32k # Different name, same clock
assigned-clocks:
minItems: 1
......
......@@ -65,7 +65,7 @@ properties:
protected-clocks:
description:
Protected clock specifier list as per common clock binding
Protected clock specifier list as per common clock binding
vdd-gfx-supply:
description:
......
......@@ -19,15 +19,15 @@ description:
properties:
compatible:
oneOf:
- const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6
- const: renesas,r8a7740-cpg-clocks # R-Mobile A1
- const: renesas,r8a7778-cpg-clocks # R-Car M1
- const: renesas,r8a7779-cpg-clocks # R-Car H1
- const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6
- const: renesas,r8a7740-cpg-clocks # R-Mobile A1
- const: renesas,r8a7778-cpg-clocks # R-Car M1
- const: renesas,r8a7779-cpg-clocks # R-Car H1
- items:
- enum:
- renesas,r7s72100-cpg-clocks # RZ/A1H
- const: renesas,rz-cpg-clocks # RZ/A1
- const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5
- enum:
- renesas,r7s72100-cpg-clocks # RZ/A1H
- const: renesas,rz-cpg-clocks # RZ/A1
- const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5
reg:
maxItems: 1
......
......@@ -16,7 +16,7 @@ properties:
"#clock-cells":
const: 1
compatible :
compatible:
enum:
- sprd,sc9863a-ap-clk
- sprd,sc9863a-aon-clk
......
......@@ -32,8 +32,7 @@ properties:
- const: hdmi
ddc:
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description: >
Phandle of the I2C controller used for DDC EDID probing
......
......@@ -162,14 +162,13 @@ required:
additionalProperties: false
examples:
- |
- |
#include <dt-bindings/clock/imx8mq-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/clock/imx8mq-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/imx8mq-reset.h>
mipi_dsi: mipi_dsi@30a00000 {
mipi_dsi: mipi_dsi@30a00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8mq-nwl-dsi";
......@@ -224,4 +223,4 @@ examples:
};
};
};
};
};
......@@ -119,17 +119,17 @@ then:
# The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
# These clocks are optional.
- enum:
- extal
- dclkin.0
- dclkin.1
- extal
- dclkin.0
- dclkin.1
- enum:
- extal
- dclkin.0
- dclkin.1
- extal
- dclkin.0
- dclkin.1
- enum:
- extal
- dclkin.0
- dclkin.1
- extal
- dclkin.0
- dclkin.1
required:
- clock-names
......
......@@ -18,16 +18,16 @@ properties:
compatible:
oneOf:
- items:
- enum:
- ti,ths8134a
- ti,ths8134b
- const: ti,ths8134
- enum:
- ti,ths8134a
- ti,ths8134b
- const: ti,ths8134
- enum:
- adi,adv7123
- dumb-vga-dac
- ti,opa362
- ti,ths8134
- ti,ths8135
- adi,adv7123
- dumb-vga-dac
- ti,opa362
- ti,ths8134
- ti,ths8135
ports:
type: object
......
......@@ -55,11 +55,11 @@ patternProperties:
clock-master:
type: boolean
description:
Should be enabled if the host is being used in conjunction with
another DSI host to drive the same peripheral. Hardware supporting
such a configuration generally requires the data on both the busses
to be driven by the same clock. Only the DSI host instance
controlling this clock should contain this property.
Should be enabled if the host is being used in conjunction with
another DSI host to drive the same peripheral. Hardware supporting
such a configuration generally requires the data on both the busses
to be driven by the same clock. Only the DSI host instance
controlling this clock should contain this property.
enforce-video-mode:
type: boolean
......
......@@ -21,9 +21,9 @@ properties:
items:
- enum:
# Waveshare 3.5" 320x480 Color TFT LCD
- waveshare,rpi-lcd-35
- waveshare,rpi-lcd-35
# Ozzmaker 3.5" 320x480 Color TFT LCD
- ozzmaker,piscreen
- ozzmaker,piscreen
- const: ilitek,ili9486
spi-max-frequency:
......
......@@ -13,11 +13,11 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4725b-ipu
- ingenic,jz4760-ipu
- ingenic,jz4725b-ipu
- ingenic,jz4760-ipu
- items:
- const: ingenic,jz4770-ipu
- const: ingenic,jz4760-ipu
- const: ingenic,jz4770-ipu
- const: ingenic,jz4760-ipu
reg:
maxItems: 1
......
......@@ -58,11 +58,11 @@ properties:
- port@0
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- compatible
- reg
- interrupts
- clocks
- clock-names
if:
properties:
......
......@@ -38,10 +38,10 @@ properties:
clocks:
items:
- description: GMU clock
- description: GPU CX clock
- description: GPU AXI clock
- description: GPU MEMNOC clock
- description: GMU clock
- description: GPU CX clock
- description: GPU AXI clock
- description: GPU MEMNOC clock
clock-names:
items:
......@@ -52,8 +52,8 @@ properties:
interrupts:
items:
- description: GMU HFI interrupt
- description: GMU interrupt
- description: GMU HFI interrupt
- description: GMU interrupt
interrupt-names:
......@@ -62,14 +62,14 @@ properties:
- const: gmu
power-domains:
items:
- description: CX power domain
- description: GX power domain
items:
- description: CX power domain
- description: GX power domain
power-domain-names:
items:
- const: cx
- const: gx
items:
- const: cx
- const: gx
iommus:
maxItems: 1
......@@ -90,13 +90,13 @@ required:
- operating-points-v2
examples:
- |
#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- |
#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
gmu: gmu@506a000 {
gmu: gmu@506a000 {
compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
reg = <0x506a000 0x30000>,
......@@ -120,4 +120,4 @@ examples:
iommus = <&adreno_smmu 5>;
operating-points-v2 = <&gmu_opp_table>;
};
};
......@@ -24,9 +24,9 @@ properties:
reg: true
reset-gpios: true
vdd-supply:
description: core voltage supply
description: core voltage supply
vddio-supply:
description: vddio supply
description: vddio supply
required:
- compatible
......
......@@ -48,12 +48,12 @@ properties:
port: true
required:
- compatible
- reg
- enable-gpios
- pp1800-supply
- avdd-supply
- avee-supply
- compatible
- reg
- enable-gpios
- pp1800-supply
- avdd-supply
- avee-supply
additionalProperties: false
......
......@@ -19,9 +19,9 @@ properties:
backlight: true
reset-gpios: true
iovcc-supply:
description: regulator that supplies the iovcc voltage
description: regulator that supplies the iovcc voltage
vdd-supply:
description: regulator that supplies the vdd voltage
description: regulator that supplies the vdd voltage
required:
- compatible
......
......@@ -19,11 +19,11 @@ properties:
backlight: true
reset-gpios: true
avdd-supply:
description: regulator that supplies the AVDD voltage
description: regulator that supplies the AVDD voltage
dvdd-supply:
description: regulator that supplies the DVDD voltage
description: regulator that supplies the DVDD voltage
cvdd-supply:
description: regulator that supplies the CVDD voltage
description: regulator that supplies the CVDD voltage
required:
- compatible
......
......@@ -25,8 +25,7 @@ properties:
compatible:
items:
- enum:
- dlink,dir-685-panel
- dlink,dir-685-panel
- const: ilitek,ili9322
reset-gpios: true
......
......@@ -13,8 +13,7 @@ properties:
compatible:
items:
- enum:
- bananapi,lhr050h41
- bananapi,lhr050h41
- const: ilitek,ili9881c
backlight: true
......
......@@ -21,9 +21,9 @@ properties:
backlight: true
reset-gpios: true
iovcc-supply:
description: regulator that supplies the iovcc voltage
description: regulator that supplies the iovcc voltage
vci-supply:
description: regulator that supplies the vci voltage
description: regulator that supplies the vci voltage
required:
- compatible
......
......@@ -19,9 +19,9 @@ properties:
backlight: true
reset-gpios: true
iovcc-supply:
description: regulator that supplies the iovcc voltage
description: regulator that supplies the iovcc voltage
vcc-supply:
description: regulator that supplies the vcc voltage
description: regulator that supplies the vcc voltage
required:
- compatible
......
......@@ -25,9 +25,9 @@ properties:
reg: true
reset-gpios: true
vdd-supply:
description: regulator that supplies the vdd voltage
description: regulator that supplies the vdd voltage
vddi-supply:
description: regulator that supplies the vddi voltage
description: regulator that supplies the vddi voltage
backlight: true
required:
......
......@@ -27,10 +27,10 @@ properties:
compatible:
items:
- enum:
- motorola,droid4-panel # Panel from Motorola Droid4 phone
- nokia,himalaya # Panel from Nokia N950 phone
- tpo,taal # Panel from OMAP4 SDP board
- const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
- motorola,droid4-panel # Panel from Motorola Droid4 phone
- nokia,himalaya # Panel from Nokia N950 phone
- tpo,taal # Panel from OMAP4 SDP board
- const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
reg:
maxItems: 1
......
......@@ -59,7 +59,7 @@ description: |
properties:
clock-frequency:
description: Panel clock in Hz
description: Panel clock in Hz
hactive:
$ref: /schemas/types.yaml#/definitions/uint32
......@@ -200,15 +200,15 @@ properties:
description: Enable double clock mode
required:
- clock-frequency
- hactive
- vactive
- hfront-porch
- hback-porch
- hsync-len
- vfront-porch
- vback-porch
- vsync-len
- clock-frequency
- hactive
- vactive
- hfront-porch
- hback-porch
- hsync-len
- vfront-porch
- vback-porch
- vsync-len
additionalProperties: false
......
......@@ -10,8 +10,8 @@ maintainers:
- Philippe CORNU <philippe.cornu@st.com>
description: |
The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
panel connected using a MIPI-DSI video interface.
The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
panel connected using a MIPI-DSI video interface.
allOf:
- $ref: panel-common.yaml#
......
......@@ -18,9 +18,9 @@ properties:
reg: true
reset-gpios: true
vdd3-supply:
description: core voltage supply
description: core voltage supply
vci-supply:
description: voltage supply for analog circuits
description: voltage supply for analog circuits
required:
- compatible
......
......@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Visionox model RM69299 Panels Device Tree Bindings.
maintainers:
- Harigovindan P <harigovi@codeaurora.org>
- Harigovindan P <harigovi@codeaurora.org>
description: |
This binding is for display panels using a Visionox RM692999 panel.
......
......@@ -45,7 +45,7 @@ properties:
phy-dsi-supply:
description:
Phandle of the regulator that provides the supply voltage.
Phandle of the regulator that provides the supply voltage.
ports:
type: object
......@@ -147,4 +147,3 @@ examples:
...
......@@ -78,7 +78,7 @@ properties:
- const: vp4
interrupts:
items:
items:
- description: common_m DSS Master common
- description: common_s0 DSS Shared common 0
- description: common_s1 DSS Shared common 1
......
......@@ -56,8 +56,8 @@ properties:
memory-region:
description:
phandle to a node describing reserved memory (System RAM memory)
used by DSP (see bindings/reserved-memory/reserved-memory.txt)
phandle to a node describing reserved memory (System RAM memory)
used by DSP (see bindings/reserved-memory/reserved-memory.txt)
maxItems: 1
required:
......
......@@ -177,10 +177,10 @@ properties:
dependencies:
# 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
# is present
vendor,bool-property: [ vendor,string-array-property ]
vendor,bool-property: [ 'vendor,string-array-property' ]
# Expressing 2 properties in both orders means all of the set of properties
# must be present or none of them.
vendor,string-array-property: [ vendor,bool-property ]
vendor,string-array-property: [ 'vendor,bool-property' ]
required:
- compatible
......
......@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: IBM FSI-attached SPI controllers
maintainers:
- Eddie James <eajames@linux.ibm.com>
- Eddie James <eajames@linux.ibm.com>
description: |
This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
......
......@@ -19,10 +19,8 @@ properties:
reg:
items:
- description: the I/O address containing the GPIO controller
registers.
- description: the I/O address containing the Chip Common A interrupt
registers.
- description: the I/O address containing the GPIO controller registers.
- description: the I/O address containing the Chip Common A interrupt registers.
gpio-controller: true
......
......@@ -13,39 +13,39 @@ properties:
compatible:
oneOf:
- items:
- enum:
- renesas,gpio-r8a7778 # R-Car M1
- renesas,gpio-r8a7779 # R-Car H1
- const: renesas,rcar-gen1-gpio # R-Car Gen1
- enum:
- renesas,gpio-r8a7778 # R-Car M1
- renesas,gpio-r8a7779 # R-Car H1
- const: renesas,rcar-gen1-gpio # R-Car Gen1
- items:
- enum:
- renesas,gpio-r8a7742 # RZ/G1H
- renesas,gpio-r8a7743 # RZ/G1M
- renesas,gpio-r8a7744 # RZ/G1N
- renesas,gpio-r8a7745 # RZ/G1E
- renesas,gpio-r8a77470 # RZ/G1C
- renesas,gpio-r8a7790 # R-Car H2
- renesas,gpio-r8a7791 # R-Car M2-W
- renesas,gpio-r8a7792 # R-Car V2H
- renesas,gpio-r8a7793 # R-Car M2-N
- renesas,gpio-r8a7794 # R-Car E2
- const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
- enum:
- renesas,gpio-r8a7742 # RZ/G1H
- renesas,gpio-r8a7743 # RZ/G1M
- renesas,gpio-r8a7744 # RZ/G1N
- renesas,gpio-r8a7745 # RZ/G1E
- renesas,gpio-r8a77470 # RZ/G1C
- renesas,gpio-r8a7790 # R-Car H2
- renesas,gpio-r8a7791 # R-Car M2-W
- renesas,gpio-r8a7792 # R-Car V2H
- renesas,gpio-r8a7793 # R-Car M2-N
- renesas,gpio-r8a7794 # R-Car E2
- const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
- items:
- enum:
- renesas,gpio-r8a774a1 # RZ/G2M
- renesas,gpio-r8a774b1 # RZ/G2N
- renesas,gpio-r8a774c0 # RZ/G2E
- renesas,gpio-r8a7795 # R-Car H3
- renesas,gpio-r8a7796 # R-Car M3-W
- renesas,gpio-r8a77961 # R-Car M3-W+
- renesas,gpio-r8a77965 # R-Car M3-N
- renesas,gpio-r8a77970 # R-Car V3M
- renesas,gpio-r8a77980 # R-Car V3H
- renesas,gpio-r8a77990 # R-Car E3
- renesas,gpio-r8a77995 # R-Car D3
- const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
- enum:
- renesas,gpio-r8a774a1 # RZ/G2M
- renesas,gpio-r8a774b1 # RZ/G2N
- renesas,gpio-r8a774c0 # RZ/G2E
- renesas,gpio-r8a7795 # R-Car H3
- renesas,gpio-r8a7796 # R-Car M3-W
- renesas,gpio-r8a77961 # R-Car M3-W+
- renesas,gpio-r8a77965 # R-Car M3-N
- renesas,gpio-r8a77970 # R-Car V3M
- renesas,gpio-r8a77980 # R-Car V3H
- renesas,gpio-r8a77990 # R-Car E3
- renesas,gpio-r8a77995 # R-Car D3
- const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
reg:
maxItems: 1
......
......@@ -26,7 +26,8 @@ properties:
- description: AXI/master interface clock
- description: GPU core clock
- description: Shader clock (only required if GPU has feature PIPE_3D)
- description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
- description: AHB/slave interface clock (only required if GPU can gate
slave interface independently)
minItems: 1
maxItems: 4
......
......@@ -19,7 +19,7 @@ description: |+
properties:
compatible:
enum:
- adi,axi-fan-control-1.00.a
- adi,axi-fan-control-1.00.a
reg:
maxItems: 1
......
......@@ -20,22 +20,22 @@ properties:
- const: fsl,imx1-i2c
- items:
- enum:
- fsl,imx25-i2c
- fsl,imx27-i2c
- fsl,imx31-i2c
- fsl,imx50-i2c
- fsl,imx51-i2c
- fsl,imx53-i2c
- fsl,imx6q-i2c
- fsl,imx6sl-i2c
- fsl,imx6sx-i2c
- fsl,imx6sll-i2c
- fsl,imx6ul-i2c
- fsl,imx7s-i2c
- fsl,imx8mq-i2c
- fsl,imx8mm-i2c
- fsl,imx8mn-i2c
- fsl,imx8mp-i2c
- fsl,imx25-i2c
- fsl,imx27-i2c
- fsl,imx31-i2c
- fsl,imx50-i2c
- fsl,imx51-i2c
- fsl,imx53-i2c
- fsl,imx6q-i2c
- fsl,imx6sl-i2c
- fsl,imx6sx-i2c
- fsl,imx6sll-i2c
- fsl,imx6ul-i2c
- fsl,imx7s-i2c
- fsl,imx8mq-i2c
- fsl,imx8mm-i2c
- fsl,imx8mn-i2c
- fsl,imx8mp-i2c
- const: fsl,imx21-i2c
reg:
......
......@@ -16,8 +16,8 @@ allOf:
required:
- mrvl,i2c-polling
then:
required:
- interrupts
required:
- interrupts
properties:
compatible:
......
......@@ -53,10 +53,10 @@ properties:
standby-gpios:
description:
Must be the device tree identifier of the STBY pin. This pin is used
to place the AD7606 into one of two power-down modes, Standby mode or
Shutdown mode. As the line is active low, it should be marked
GPIO_ACTIVE_LOW.
Must be the device tree identifier of the STBY pin. This pin is used
to place the AD7606 into one of two power-down modes, Standby mode or
Shutdown mode. As the line is active low, it should be marked
GPIO_ACTIVE_LOW.
maxItems: 1
adi,first-data-gpios:
......
......@@ -10,7 +10,7 @@ maintainers:
- Jonathan Cameron <jic23@kernel.org>
description: |
Family of simple ADCs with i2c inteface and internal references.
Family of simple ADCs with i2c inteface and internal references.
properties:
compatible:
......
......@@ -24,11 +24,11 @@ properties:
- const: qcom,spmi-adc-rev2
- items:
- enum:
- qcom,spmi-vadc
- qcom,spmi-adc5
- qcom,spmi-adc-rev2
- qcom,spmi-adc7
- enum:
- qcom,spmi-vadc
- qcom,spmi-adc5
- qcom,spmi-adc-rev2
- qcom,spmi-adc7
reg:
description: VADC base address in the SPMI PMIC register map
......@@ -97,16 +97,14 @@ patternProperties:
input signal is multiplied. For example, <1 3> indicates the signal is scaled
down to 1/3 of its value before ADC measurement.
If property is not found default value depending on chip will be used.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
oneOf:
- items:
- const: 1
- enum: [ 1, 3, 4, 6, 20, 8, 10 ]
- const: 1
- enum: [ 1, 3, 4, 6, 20, 8, 10 ]
- items:
- const: 10
- const: 81
- const: 10
- const: 81
qcom,ratiometric:
description: |
......
......@@ -17,10 +17,10 @@ properties:
- const: rockchip,rk3399-saradc
- items:
- enum:
- rockchip,px30-saradc
- rockchip,rk3308-saradc
- rockchip,rk3328-saradc
- rockchip,rv1108-saradc
- rockchip,px30-saradc
- rockchip,rk3308-saradc
- rockchip,rk3328-saradc
- rockchip,rv1108-saradc
- const: rockchip,rk3399-saradc
reg:
......
......@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: HMC425A 6-bit Digital Step Attenuator
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
- Beniamin Bia <beniamin.bia@analog.com>
- Michael Hennerich <michael.hennerich@analog.com>
- Beniamin Bia <beniamin.bia@analog.com>
description: |
Digital Step Attenuator IIO device with gpio interface.
......
......@@ -31,10 +31,10 @@ properties:
- atlas,co2-ezo
reg:
maxItems: 1
maxItems: 1
interrupts:
maxItems: 1
maxItems: 1
required:
- compatible
......
......@@ -61,17 +61,17 @@ properties:
const: 0
adi,range-microamp:
description: Output range of the channel.
oneOf:
- items:
- const: 0
- const: 300000
- items:
- const: -60000
- const: 0
- items:
- const: -60000
- const: 300000
description: Output range of the channel.
oneOf:
- items:
- const: 0
- const: 300000
- items:
- const: -60000
- const: 0
- items:
- const: -60000
- const: 300000
channel@1:
description: Represents an external channel which are
......@@ -84,10 +84,10 @@ properties:
const: 1
adi,range-microamp:
description: Output range of the channel.
items:
- const: 0
- enum: [ 140000, 250000 ]
description: Output range of the channel.
items:
- const: 0
- enum: [140000, 250000]
channel@2:
description: Represents an external channel which are
......@@ -100,10 +100,10 @@ properties:
const: 2
adi,range-microamp:
description: Output range of the channel.
items:
- const: 0
- enum: [ 55000, 150000 ]
description: Output range of the channel.
items:
- const: 0
- enum: [55000, 150000]
patternProperties:
"^channel@([3-5])$":
......@@ -116,19 +116,19 @@ patternProperties:
maximum: 5
adi,range-microamp:
description: Output range of the channel.
items:
- const: 0
- enum: [ 45000, 100000 ]
description: Output range of the channel.
items:
- const: 0
- enum: [45000, 100000]
required:
- reg
- channel@0
- channel@1
- channel@2
- channel@3
- channel@4
- channel@5
- reg
- channel@0
- channel@1
- channel@2
- channel@3
- channel@4
- channel@5
examples:
- |
......
......@@ -36,15 +36,15 @@ required:
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
light-sensor@51 {
compatible = "vishay,vcnl4200";
reg = <0x51>;
proximity-near-level = <220>;
};
};
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
light-sensor@51 {
compatible = "vishay,vcnl4200";
reg = <0x51>;
proximity-near-level = <220>;
};
};
...
......@@ -13,15 +13,15 @@ properties:
compatible:
oneOf:
- enum:
- asahi-kasei,ak8975
- asahi-kasei,ak8963
- asahi-kasei,ak09911
- asahi-kasei,ak09912
- asahi-kasei,ak8975
- asahi-kasei,ak8963
- asahi-kasei,ak09911
- asahi-kasei,ak09912
- enum:
- ak8975
- ak8963
- ak09911
- ak09912
- ak8975
- ak8963
- ak09911
- ak09912
deprecated: true
reg:
......
......@@ -39,8 +39,8 @@ properties:
description:
The driver current for the LED used in proximity sensing.
enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
180000, 190000, 200000]
100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
180000, 190000, 200000]
default: 20000
required:
......
......@@ -307,7 +307,7 @@ patternProperties:
mode.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
500000, 1000000]
500000, 1000000]
adi,custom-thermistor:
description:
......
......@@ -24,19 +24,19 @@ properties:
- const: fsl,imx21-kpp
- items:
- enum:
- fsl,imx25-kpp
- fsl,imx27-kpp
- fsl,imx31-kpp
- fsl,imx35-kpp
- fsl,imx51-kpp
- fsl,imx53-kpp
- fsl,imx50-kpp
- fsl,imx6q-kpp
- fsl,imx6sx-kpp
- fsl,imx6sl-kpp
- fsl,imx6sll-kpp
- fsl,imx6ul-kpp
- fsl,imx7d-kpp
- fsl,imx25-kpp
- fsl,imx27-kpp
- fsl,imx31-kpp
- fsl,imx35-kpp
- fsl,imx51-kpp
- fsl,imx53-kpp
- fsl,imx50-kpp
- fsl,imx6q-kpp
- fsl,imx6sx-kpp
- fsl,imx6sl-kpp
- fsl,imx6sll-kpp
- fsl,imx6ul-kpp
- fsl,imx7d-kpp
- const: fsl,imx21-kpp
reg:
......
......@@ -51,7 +51,7 @@ required:
- touchscreen-max-pressure
examples:
- |
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
......
......@@ -20,11 +20,11 @@ maintainers:
allOf:
- $ref: touchscreen.yaml#
- if:
properties:
compatible:
contains:
enum:
- evervision,ev-ft5726
properties:
compatible:
contains:
enum:
- evervision,ev-ft5726
then:
properties:
......
......@@ -35,9 +35,8 @@ properties:
maxItems: 1
irq-gpios:
description: GPIO pin used for IRQ.
The driver uses the interrupt gpio pin as
output to reset the device.
description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
as output to reset the device.
maxItems: 1
reset-gpios:
......
......@@ -33,8 +33,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-min-pressure:
description: minimum pressure on the touchscreen to be achieved in order for the
touchscreen driver to report a touch event.
description: minimum pressure on the touchscreen to be achieved in order
for the touchscreen driver to report a touch event.
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-fuzz-x:
......@@ -46,13 +46,13 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-fuzz-pressure:
description: pressure noise value of the absolute input device (arbitrary range
dependent on the controller)
description: pressure noise value of the absolute input device (arbitrary
range dependent on the controller)
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-average-samples:
description: Number of data samples which are averaged for each read (valid values
dependent on the controller)
description: Number of data samples which are averaged for each read (valid
values dependent on the controller)
$ref: /schemas/types.yaml#/definitions/uint32
touchscreen-inverted-x:
......
......@@ -25,17 +25,17 @@ properties:
compatible:
oneOf:
- items:
- enum:
- fsl,imx8mn-nic
- fsl,imx8mm-nic
- fsl,imx8mq-nic
- const: fsl,imx8m-nic
- enum:
- fsl,imx8mn-nic
- fsl,imx8mm-nic
- fsl,imx8mq-nic
- const: fsl,imx8m-nic
- items:
- enum:
- fsl,imx8mn-noc
- fsl,imx8mm-noc
- fsl,imx8mq-noc
- const: fsl,imx8m-noc
- enum:
- fsl,imx8mn-noc
- fsl,imx8mm-noc
- fsl,imx8mq-noc
- const: fsl,imx8m-noc
- const: fsl,imx8m-nic
reg:
......
......@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SC7180 Network-On-Chip Interconnect
title: Qualcomm SC7180 Network-On-Chip Interconnect
maintainers:
- Odelu Kukatla <okukatla@codeaurora.org>
......
......@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SDM845 Network-On-Chip Interconnect
title: Qualcomm SDM845 Network-On-Chip Interconnect
maintainers:
- Georgi Djakov <georgi.djakov@linaro.org>
......
......@@ -42,8 +42,8 @@ properties:
- items:
- const: arm,gic-400
- enum:
- arm,cortex-a15-gic
- arm,cortex-a7-gic
- arm,cortex-a15-gic
- arm,cortex-a7-gic
- items:
- const: arm,arm1176jzf-devchip-gic
......
......@@ -16,20 +16,20 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-intc
- ingenic,jz4760-intc
- ingenic,jz4780-intc
- ingenic,jz4740-intc
- ingenic,jz4760-intc
- ingenic,jz4780-intc
- items:
- enum:
- ingenic,jz4775-intc
- ingenic,jz4770-intc
- const: ingenic,jz4760-intc
- enum:
- ingenic,jz4775-intc
- ingenic,jz4770-intc
- const: ingenic,jz4760-intc
- items:
- const: ingenic,x1000-intc
- const: ingenic,jz4780-intc
- const: ingenic,x1000-intc
- const: ingenic,jz4780-intc
- items:
- const: ingenic,jz4725b-intc
- const: ingenic,jz4740-intc
- const: ingenic,jz4725b-intc
- const: ingenic,jz4740-intc
"#interrupt-cells":
const: 1
......
......@@ -42,14 +42,13 @@ properties:
Specifies the list of CPU interrupt vectors to which the GIC may not
route interrupts. This property is ignored if the CPU is started in EIC
mode.
allOf:
- $ref: /schemas/types.yaml#definitions/uint32-array
- minItems: 1
maxItems: 6
uniqueItems: true
items:
minimum: 2
maximum: 7
$ref: /schemas/types.yaml#definitions/uint32-array
minItems: 1
maxItems: 6
uniqueItems: true
items:
minimum: 2
maximum: 7
mti,reserved-ipi-vectors:
description: |
......@@ -57,13 +56,12 @@ properties:
It accepts two values: the 1st is the starting interrupt and the 2nd is
the size of the reserved range. If not specified, the driver will
allocate the last (2 * number of VPEs in the system).
allOf:
- $ref: /schemas/types.yaml#definitions/uint32-array
- items:
- minimum: 0
maximum: 254
- minimum: 2
maximum: 254
$ref: /schemas/types.yaml#definitions/uint32-array
items:
- minimum: 0
maximum: 254
- minimum: 2
maximum: 254
timer:
type: object
......
......@@ -79,7 +79,8 @@ properties:
description: |
kHz; switching frequency.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
2400, 3200, 4800, 9600 ]
qcom,ovp:
description: |
......
......@@ -29,12 +29,12 @@ properties:
- const: fsl,imx8-mu-scu
- items:
- enum:
- fsl,imx7s-mu
- fsl,imx8mq-mu
- fsl,imx8mm-mu
- fsl,imx8mn-mu
- fsl,imx8mp-mu
- fsl,imx8qxp-mu
- fsl,imx7s-mu
- fsl,imx8mq-mu
- fsl,imx8mm-mu
- fsl,imx8mn-mu
- fsl,imx8mp-mu
- fsl,imx8qxp-mu
- const: fsl,imx6sx-mu
- description: To communicate with i.MX8 SCU with fast IPC
items:
......
......@@ -24,7 +24,7 @@ properties:
compatible:
items:
- enum:
- qcom,sm8250-ipcc
- qcom,sm8250-ipcc
- const: qcom,ipcc
reg:
......
......@@ -20,8 +20,8 @@ properties:
oneOf:
- const: allwinner,sun8i-a83t-de2-rotate
- items:
- const: allwinner,sun50i-a64-de2-rotate
- const: allwinner,sun8i-a83t-de2-rotate
- const: allwinner,sun50i-a64-de2-rotate
- const: allwinner,sun8i-a83t-de2-rotate
reg:
maxItems: 1
......
......@@ -20,8 +20,8 @@ properties:
oneOf:
- const: allwinner,sun8i-h3-deinterlace
- items:
- const: allwinner,sun50i-a64-deinterlace
- const: allwinner,sun8i-h3-deinterlace
- const: allwinner,sun50i-a64-deinterlace
- const: allwinner,sun8i-h3-deinterlace
reg:
maxItems: 1
......
......@@ -17,17 +17,17 @@ properties:
compatible:
items:
- enum:
- adi,adv7180
- adi,adv7180cp
- adi,adv7180st
- adi,adv7182
- adi,adv7280
- adi,adv7280-m
- adi,adv7281
- adi,adv7281-m
- adi,adv7281-ma
- adi,adv7282
- adi,adv7282-m
- adi,adv7180
- adi,adv7180cp
- adi,adv7180st
- adi,adv7182
- adi,adv7280
- adi,adv7280-m
- adi,adv7281
- adi,adv7281-m
- adi,adv7281-ma
- adi,adv7282
- adi,adv7282-m
reg:
maxItems: 1
......@@ -58,17 +58,16 @@ allOf:
- if:
properties:
compatible:
items:
- enum:
- adi,adv7180
- adi,adv7182
- adi,adv7280
- adi,adv7280-m
- adi,adv7281
- adi,adv7281-m
- adi,adv7281-ma
- adi,adv7282
- adi,adv7282-m
enum:
- adi,adv7180
- adi,adv7182
- adi,adv7280
- adi,adv7280-m
- adi,adv7281
- adi,adv7281-m
- adi,adv7281-ma
- adi,adv7282
- adi,adv7282-m
then:
required:
- port
......
......@@ -38,39 +38,36 @@ properties:
dongwoon,aac-mode:
description:
Indication of AAC mode select.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- enum:
- 1 # AAC2 mode(operation time# 0.48 x Tvib)
- 2 # AAC3 mode(operation time# 0.70 x Tvib)
- 3 # AAC4 mode(operation time# 0.75 x Tvib)
- 5 # AAC8 mode(operation time# 1.13 x Tvib)
default: 2
$ref: "/schemas/types.yaml#/definitions/uint32"
enum:
- 1 # AAC2 mode(operation time# 0.48 x Tvib)
- 2 # AAC3 mode(operation time# 0.70 x Tvib)
- 3 # AAC4 mode(operation time# 0.75 x Tvib)
- 5 # AAC8 mode(operation time# 1.13 x Tvib)
default: 2
dongwoon,aac-timing:
description:
Number of AAC Timing count that controlled by one 6-bit period of
vibration register AACT[5:0], the unit of which is 100 us.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- default: 0x20
minimum: 0x00
maximum: 0x3f
$ref: "/schemas/types.yaml#/definitions/uint32"
default: 0x20
minimum: 0x00
maximum: 0x3f
dongwoon,clock-presc:
description:
Indication of VCM internal clock dividing rate select, as one multiple
factor to calculate VCM ring periodic time Tvib.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- enum:
- 0 # Dividing Rate - 2
- 1 # Dividing Rate - 1
- 2 # Dividing Rate - 1/2
- 3 # Dividing Rate - 1/4
- 4 # Dividing Rate - 8
- 5 # Dividing Rate - 4
default: 1
$ref: "/schemas/types.yaml#/definitions/uint32"
enum:
- 0 # Dividing Rate - 2
- 1 # Dividing Rate - 1
- 2 # Dividing Rate - 1/2
- 3 # Dividing Rate - 1/4
- 4 # Dividing Rate - 8
- 5 # Dividing Rate - 4
default: 1
required:
- compatible
......
......@@ -5,7 +5,7 @@
$id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
maintainers:
- Jacopo Mondi <jacopo+renesas@jmondi.org>
......
......@@ -49,7 +49,7 @@ properties:
gpio-controller: true
'#gpio-cells':
const: 2
const: 2
ports:
type: object
......
......@@ -138,4 +138,5 @@ examples:
};
};
};
...
\ No newline at end of file
...
......@@ -19,15 +19,15 @@ properties:
compatible:
items:
- enum:
- renesas,r8a774a1-csi2 # RZ/G2M
- renesas,r8a774b1-csi2 # RZ/G2N
- renesas,r8a774c0-csi2 # RZ/G2E
- renesas,r8a7795-csi2 # R-Car H3
- renesas,r8a7796-csi2 # R-Car M3-W
- renesas,r8a77965-csi2 # R-Car M3-N
- renesas,r8a77970-csi2 # R-Car V3M
- renesas,r8a77980-csi2 # R-Car V3H
- renesas,r8a77990-csi2 # R-Car E3
- renesas,r8a774a1-csi2 # RZ/G2M
- renesas,r8a774b1-csi2 # RZ/G2N
- renesas,r8a774c0-csi2 # RZ/G2E
- renesas,r8a7795-csi2 # R-Car H3
- renesas,r8a7796-csi2 # R-Car M3-W
- renesas,r8a77965-csi2 # R-Car M3-N
- renesas,r8a77970-csi2 # R-Car V3M
- renesas,r8a77980-csi2 # R-Car V3H
- renesas,r8a77990-csi2 # R-Car E3
reg:
maxItems: 1
......
......@@ -31,8 +31,8 @@ properties:
oneOf:
- const: vdpu
- items:
- const: vepu
- const: vdpu
- const: vepu
- const: vdpu
clocks:
maxItems: 2
......
......@@ -25,7 +25,7 @@ properties:
compatible:
items:
- enum:
- xlnx,mipi-csi2-rx-subsystem-5.0
- xlnx,mipi-csi2-rx-subsystem-5.0
reg:
maxItems: 1
......@@ -65,13 +65,12 @@ properties:
0x2d - RAW14
0x2e - RAW16
0x2f - RAW20
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- anyOf:
- minimum: 0x1e
- maximum: 0x24
- minimum: 0x28
- maximum: 0x2f
$ref: /schemas/types.yaml#/definitions/uint32
oneOf:
- minimum: 0x1e
maximum: 0x24
- minimum: 0x28
maximum: 0x2f
xlnx,vfb:
type: boolean
......
......@@ -15,12 +15,12 @@ properties:
- const: fsl,imx6q-mmdc
- items:
- enum:
- fsl,imx6qp-mmdc
- fsl,imx6sl-mmdc
- fsl,imx6sll-mmdc
- fsl,imx6sx-mmdc
- fsl,imx6ul-mmdc
- fsl,imx7ulp-mmdc
- fsl,imx6qp-mmdc
- fsl,imx6sl-mmdc
- fsl,imx6sll-mmdc
- fsl,imx6sx-mmdc
- fsl,imx6ul-mmdc
- fsl,imx7ulp-mmdc
- const: fsl,imx6q-mmdc
reg:
......
......@@ -16,11 +16,11 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-nemc
- ingenic,jz4780-nemc
- ingenic,jz4740-nemc
- ingenic,jz4780-nemc
- items:
- const: ingenic,jz4725b-nemc
- const: ingenic,jz4740-nemc
- const: ingenic,jz4725b-nemc
- const: ingenic,jz4740-nemc
"#address-cells":
const: 2
......
......@@ -26,10 +26,10 @@ properties:
compatible:
items:
- enum:
- renesas,r8a77970-rpc-if # R-Car V3M
- renesas,r8a77980-rpc-if # R-Car V3H
- renesas,r8a77995-rpc-if # R-Car D3
- const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
- renesas,r8a77970-rpc-if # R-Car V3M
- renesas,r8a77980-rpc-if # R-Car V3H
- renesas,r8a77995-rpc-if # R-Car D3
- const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
reg:
items:
......
......@@ -98,11 +98,11 @@ allOf:
description:
Databus power supply.
- if:
properties:
compatible:
contains:
enum:
- cirrus,cs47l15
properties:
compatible:
contains:
enum:
- cirrus,cs47l15
then:
required:
- MICVDD-supply
......@@ -174,24 +174,24 @@ properties:
"mclk3" For the clock supplied on MCLK3.
oneOf:
- items:
- const: mclk1
- const: mclk1
- items:
- const: mclk2
- const: mclk2
- items:
- const: mclk3
- const: mclk3
- items:
- const: mclk1
- const: mclk2
- const: mclk1
- const: mclk2
- items:
- const: mclk1
- const: mclk3
- const: mclk1
- const: mclk3
- items:
- const: mclk2
- const: mclk3
- const: mclk2
- const: mclk3
- items:
- const: mclk1
- const: mclk2
- const: mclk3
- const: mclk1
- const: mclk2
- const: mclk3
AVDD-supply:
description:
......
......@@ -90,8 +90,8 @@ properties:
description: Values of resistors for divider on raw ADC input
maxItems: 2
items:
minimum: 1000
maximum: 1000000
minimum: 1000
maximum: 1000000
gw,voltage-offset-microvolt:
description: |
......
......@@ -113,8 +113,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -135,8 +135,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -154,8 +154,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -172,8 +172,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -198,8 +198,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......@@ -220,8 +220,8 @@ properties:
maxItems: 1
st,mask-reset:
description: mask reset for this regulator,
the regulator configuration is maintained during pmic reset.
description: mask reset for this regulator, the regulator configuration
is maintained during pmic reset.
$ref: /schemas/types.yaml#/definitions/flag
regulator-name: true
......
......@@ -24,12 +24,11 @@ maintainers:
properties:
compatible:
anyOf:
- items:
- enum:
- ti,j721e-system-controller
- const: syscon
- const: simple-mfd
items:
- enum:
- ti,j721e-system-controller
- const: syscon
- const: simple-mfd
"#address-cells":
const: 1
......
......@@ -73,13 +73,13 @@ allOf:
required:
- DBVDD3-supply
- if:
properties:
compatible:
contains:
enum:
- cirrus,cs47l24
- wlf,wm1831
- wlf,wm8997
properties:
compatible:
contains:
enum:
- cirrus,cs47l24
- wlf,wm1831
- wlf,wm8997
then:
properties:
SPKVDD-supply:
......@@ -183,12 +183,12 @@ properties:
clock supplied on MCLK2, recommended to be an always on 32k clock.
oneOf:
- items:
- const: mclk1
- const: mclk1
- items:
- const: mclk2
- const: mclk2
- items:
- const: mclk1
- const: mclk2
- const: mclk1
- const: mclk2
reset-gpios:
maxItems: 1
......
......@@ -21,9 +21,9 @@ properties:
compatible:
items:
- enum:
- amlogic,meson8-sdhc
- amlogic,meson8b-sdhc
- amlogic,meson8m2-sdhc
- amlogic,meson8-sdhc
- amlogic,meson8b-sdhc
- amlogic,meson8m2-sdhc
- const: amlogic,meson-mx-sdhc
reg:
......
......@@ -16,14 +16,14 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-mmc
- ingenic,jz4725b-mmc
- ingenic,jz4760-mmc
- ingenic,jz4780-mmc
- ingenic,x1000-mmc
- ingenic,jz4740-mmc
- ingenic,jz4725b-mmc
- ingenic,jz4760-mmc
- ingenic,jz4780-mmc
- ingenic,x1000-mmc
- items:
- const: ingenic,jz4770-mmc
- const: ingenic,jz4760-mmc
- const: ingenic,jz4770-mmc
- const: ingenic,jz4760-mmc
reg:
maxItems: 1
......
......@@ -130,9 +130,9 @@ then:
required:
- clock-names
description:
The internal card detection logic that exists in these controllers is
sectioned off to be run by a separate second clock source to allow
the main core clock to be turned off to save power.
The internal card detection logic that exists in these controllers is
sectioned off to be run by a separate second clock source to allow
the main core clock to be turned off to save power.
unevaluatedProperties: false
......
......@@ -14,12 +14,10 @@ maintainers:
properties:
compatible:
oneOf:
- items:
- enum:
items:
- enum:
- xlnx,zynqmp-nand-controller
- enum:
- arasan,nfc-v3p10
- const: arasan,nfc-v3p10
reg:
maxItems: 1
......
......@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale General-Purpose Media Interface (GPMI) binding
title: Freescale General-Purpose Media Interface (GPMI) binding
maintainers:
- Han Xu <han.xu@nxp.com>
......
......@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale's mxc_nand binding
title: Freescale's mxc_nand binding
maintainers:
- Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
......
......@@ -42,7 +42,7 @@ patternProperties:
const: 512
nand-ecc-strength:
enum: [1, 4 ,8 ]
enum: [1, 4, 8]
allOf:
- $ref: "nand-controller.yaml#"
......
......@@ -85,8 +85,8 @@ patternProperties:
oneOf:
- required:
- ports
- ports
- required:
- ethernet-ports
- ethernet-ports
...
......@@ -43,7 +43,7 @@ description:
properties:
compatible:
const: "qcom,sdm845-ipa"
const: "qcom,sdm845-ipa"
reg:
items:
......@@ -64,7 +64,7 @@ properties:
maxItems: 1
clock-names:
const: core
const: core
interrupts:
items:
......@@ -96,8 +96,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: State bits used in by the AP to signal the modem.
items:
- description: Whether the "ipa-clock-enabled" state bit is valid
- description: Whether the IPA clock is enabled (if valid)
- description: Whether the "ipa-clock-enabled" state bit is valid
- description: Whether the IPA clock is enabled (if valid)
qcom,smem-state-names:
$ref: /schemas/types.yaml#/definitions/string-array
......@@ -140,9 +140,9 @@ required:
oneOf:
- required:
- modem-init
- modem-init
- required:
- memory-region
- memory-region
examples:
- |
......
......@@ -46,10 +46,10 @@ properties:
clock-names:
oneOf:
- items: # for Pro4
- const: gio
- const: ether
- const: ether-gb
- const: ether-phy
- const: gio
- const: ether
- const: ether-gb
- const: ether-phy
- const: ether # for others
resets:
......@@ -59,8 +59,8 @@ properties:
reset-names:
oneOf:
- items: # for Pro4
- const: gio
- const: ether
- const: gio
- const: ether
- const: ether # for others
socionext,syscon-phy-mode:
......
......@@ -48,11 +48,11 @@ properties:
minItems: 3
maxItems: 5
items:
- description: GMAC main clock
- description: MAC TX clock
- description: MAC RX clock
- description: For MPU family, used for power mode
- description: For MPU family, used for PHY without quartz
- description: GMAC main clock
- description: MAC TX clock
- description: MAC RX clock
- description: For MPU family, used for power mode
- description: For MPU family, used for PHY without quartz
clock-names:
minItems: 3
......@@ -89,7 +89,7 @@ required:
- st,syscon
examples:
- |
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
......
......@@ -35,7 +35,7 @@ properties:
reg:
maxItems: 1
description:
The physical base address and size of full the CPSW module IO range
The physical base address and size of full the CPSW module IO range
'#address-cells':
const: 1
......@@ -85,36 +85,36 @@ properties:
patternProperties:
"^port@[0-9]+$":
type: object
description: CPSW external ports
allOf:
- $ref: ethernet-controller.yaml#
properties:
reg:
items:
- enum: [1, 2]
description: CPSW port number
phys:
maxItems: 1
description: phandle on phy-gmii-sel PHY
label:
description: label associated with this port
ti,dual-emac-pvid:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 1024
description:
Specifies default PORT VID to be used to segregate
ports. Default value - CPSW port number.
required:
- reg
- phys
type: object
description: CPSW external ports
allOf:
- $ref: ethernet-controller.yaml#
properties:
reg:
items:
- enum: [1, 2]
description: CPSW port number
phys:
maxItems: 1
description: phandle on phy-gmii-sel PHY
label:
description: label associated with this port
ti,dual-emac-pvid:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 1024
description:
Specifies default PORT VID to be used to segregate
ports. Default value - CPSW port number.
required:
- reg
- phys
cpts:
type: object
......
......@@ -55,7 +55,7 @@ properties:
reg:
maxItems: 1
description:
The physical base address and size of full the CPSW2G NUSS IO range
The physical base address and size of full the CPSW2G NUSS IO range
reg-names:
items:
......@@ -100,38 +100,38 @@ properties:
patternProperties:
port@1:
type: object
description: CPSW2G NUSS external ports
$ref: ethernet-controller.yaml#
properties:
reg:
items:
- const: 1
description: CPSW port number
phys:
maxItems: 1
description: phandle on phy-gmii-sel PHY
label:
description: label associated with this port
ti,mac-only:
$ref: /schemas/types.yaml#definitions/flag
description:
Specifies the port works in mac-only mode.
ti,syscon-efuse:
$ref: /schemas/types.yaml#definitions/phandle-array
description:
Phandle to the system control device node which provides access
to efuse IO range with MAC addresses
required:
- reg
- phys
type: object
description: CPSW2G NUSS external ports
$ref: ethernet-controller.yaml#
properties:
reg:
items:
- const: 1
description: CPSW port number
phys:
maxItems: 1
description: phandle on phy-gmii-sel PHY
label:
description: label associated with this port
ti,mac-only:
$ref: /schemas/types.yaml#definitions/flag
description:
Specifies the port works in mac-only mode.
ti,syscon-efuse:
$ref: /schemas/types.yaml#definitions/phandle-array
description:
Phandle to the system control device node which provides access
to efuse IO range with MAC addresses
required:
- reg
- phys
additionalProperties: false
......
......@@ -21,18 +21,18 @@ properties:
compatible:
items:
- enum:
- fsl,imx6q-ocotp
- fsl,imx6sl-ocotp
- fsl,imx6sx-ocotp
- fsl,imx6ul-ocotp
- fsl,imx6ull-ocotp
- fsl,imx7d-ocotp
- fsl,imx6sll-ocotp
- fsl,imx7ulp-ocotp
- fsl,imx8mq-ocotp
- fsl,imx8mm-ocotp
- fsl,imx8mn-ocotp
- fsl,imx8mp-ocotp
- fsl,imx6q-ocotp
- fsl,imx6sl-ocotp
- fsl,imx6sx-ocotp
- fsl,imx6ul-ocotp
- fsl,imx6ull-ocotp
- fsl,imx7d-ocotp
- fsl,imx6sll-ocotp
- fsl,imx7ulp-ocotp
- fsl,imx8mq-ocotp
- fsl,imx8mm-ocotp
- fsl,imx8mn-ocotp
- fsl,imx8mp-ocotp
- const: syscon
reg:
......
......@@ -46,8 +46,8 @@ properties:
const: 1
required:
- compatible
- reg
- compatible
- reg
examples:
- |
......
......@@ -31,8 +31,7 @@ properties:
ti,syscon-pcie-ctrl:
description: Phandle to the SYSCON entry required for configuring PCIe mode
and link speed.
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
power-domains:
maxItems: 1
......
......@@ -31,8 +31,7 @@ properties:
ti,syscon-pcie-ctrl:
description: Phandle to the SYSCON entry required for configuring PCIe mode
and link speed.
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
power-domains:
maxItems: 1
......
......@@ -37,9 +37,9 @@ properties:
const: 0
phy-supply:
description:
Phandle to a regulator that provides power to the PHY. This
regulator will be managed during the PHY power on/off sequence.
description:
Phandle to a regulator that provides power to the PHY. This
regulator will be managed during the PHY power on/off sequence.
required:
- compatible
......
......@@ -100,9 +100,9 @@ properties:
- const: linestate
- const: otg-mux
- items:
- const: otg-bvalid
- const: otg-id
- const: linestate
- const: otg-bvalid
- const: otg-id
- const: linestate
phy-supply:
description:
......
......@@ -37,7 +37,7 @@ properties:
- description: Address and length of PHY's common serdes block.
"#clock-cells":
enum: [ 1, 2 ]
enum: [ 1, 2 ]
"#address-cells":
enum: [ 1, 2 ]
......@@ -65,16 +65,15 @@ properties:
vdda-phy-supply:
description:
Phandle to a regulator supply to PHY core block.
Phandle to a regulator supply to PHY core block.
vdda-pll-supply:
description:
Phandle to 1.8V regulator supply to PHY refclk pll block.
Phandle to 1.8V regulator supply to PHY refclk pll block.
vddp-ref-clk-supply:
description:
Phandle to a regulator supply to any specific refclk
pll block.
Phandle to a regulator supply to any specific refclk pll block.
#Required nodes:
patternProperties:
......@@ -184,8 +183,8 @@ allOf:
- description: phy common block reset.
reset-names:
items:
- const: phy
- const: common
- const: phy
- const: common
- if:
properties:
compatible:
......
......@@ -26,7 +26,7 @@ properties:
- const: dp_com
"#clock-cells":
enum: [ 1, 2 ]
enum: [ 1, 2 ]
"#address-cells":
enum: [ 1, 2 ]
......@@ -62,16 +62,15 @@ properties:
vdda-phy-supply:
description:
Phandle to a regulator supply to PHY core block.
Phandle to a regulator supply to PHY core block.
vdda-pll-supply:
description:
Phandle to 1.8V regulator supply to PHY refclk pll block.
Phandle to 1.8V regulator supply to PHY refclk pll block.
vddp-ref-clk-supply:
description:
Phandle to a regulator supply to any specific refclk
pll block.
Phandle to a regulator supply to any specific refclk pll block.
#Required nodes:
patternProperties:
......
......@@ -17,15 +17,15 @@ properties:
compatible:
oneOf:
- items:
- enum:
- qcom,ipq8074-qusb2-phy
- qcom,msm8996-qusb2-phy
- qcom,msm8998-qusb2-phy
- enum:
- qcom,ipq8074-qusb2-phy
- qcom,msm8996-qusb2-phy
- qcom,msm8998-qusb2-phy
- items:
- enum:
- qcom,sc7180-qusb2-phy
- qcom,sdm845-qusb2-phy
- const: qcom,qusb2-v2-phy
- enum:
- qcom,sc7180-qusb2-phy
- qcom,sdm845-qusb2-phy
- const: qcom,qusb2-v2-phy
reg:
maxItems: 1
......@@ -49,12 +49,12 @@ properties:
- const: iface
vdda-pll-supply:
description:
Phandle to 1.8V regulator supply to PHY refclk pll block.
description:
Phandle to 1.8V regulator supply to PHY refclk pll block.
vdda-phy-dpdm-supply:
description:
Phandle to 3.1V regulator supply to Dp/Dm port signals.
description:
Phandle to 3.1V regulator supply to Dp/Dm port signals.
resets:
maxItems: 1
......@@ -64,12 +64,12 @@ properties:
nvmem-cells:
maxItems: 1
description:
Phandle to nvmem cell that contains 'HS Tx trim'
tuning parameter value for qusb2 phy.
Phandle to nvmem cell that contains 'HS Tx trim'
tuning parameter value for qusb2 phy.
qcom,tcsr-syscon:
description:
Phandle to TCSR syscon register region.
Phandle to TCSR syscon register region.
$ref: /schemas/types.yaml#/definitions/phandle
if:
......
......@@ -33,8 +33,8 @@ properties:
clock-names:
oneOf:
- items: # for Pro5
- const: gio
- const: link
- const: gio
- const: link
- const: link # for others
resets:
......@@ -44,8 +44,8 @@ properties:
reset-names:
oneOf:
- items: # for Pro5
- const: gio
- const: link
- const: gio
- const: link
- const: link # for others
socionext,syscon:
......
......@@ -37,12 +37,12 @@ properties:
oneOf:
- const: link # for PXs2
- items: # for PXs3 with phy-ext
- const: link
- const: phy
- const: phy-ext
- const: link
- const: phy
- const: phy-ext
- items: # for others
- const: link
- const: phy
- const: link
- const: phy
resets:
maxItems: 2
......
......@@ -37,15 +37,15 @@ properties:
clock-names:
oneOf:
- items: # for Pro4, Pro5
- const: gio
- const: link
- const: gio
- const: link
- items: # for PXs3 with phy-ext
- const: link
- const: phy
- const: phy-ext
- const: link
- const: phy
- const: phy-ext
- items: # for others
- const: link
- const: phy
- const: link
- const: phy
resets:
maxItems: 2
......@@ -53,11 +53,11 @@ properties:
reset-names:
oneOf:
- items: # for Pro4,Pro5
- const: gio
- const: link
- const: gio
- const: link
- items: # for others
- const: link
- const: phy
- const: link
- const: phy
vbus-supply:
description: A phandle to the regulator for USB VBUS
......
......@@ -203,7 +203,8 @@ examples:
};
refclk-dig {
clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
<&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_refclk_dig>;
assigned-clock-parents = <&k3_clks 292 11>;
......
......@@ -34,22 +34,22 @@ patternProperties:
patternProperties:
"^function|groups$":
$ref: "/schemas/types.yaml#/definitions/string"
enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
required:
- compatible
......
......@@ -43,24 +43,24 @@ patternProperties:
patternProperties:
"^function|groups$":
$ref: "/schemas/types.yaml#/definitions/string"
enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
required:
- compatible
......
......@@ -31,57 +31,57 @@ patternProperties:
properties:
function:
$ref: "/schemas/types.yaml#/definitions/string"
enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4]
enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
groups:
$ref: "/schemas/types.yaml#/definitions/string"
enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
WDTRST3, WDTRST4]
enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
WDTRST3, WDTRST4]
required:
- compatible
......
......@@ -32,20 +32,20 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-pinctrl
- ingenic,jz4725b-pinctrl
- ingenic,jz4760-pinctrl
- ingenic,jz4770-pinctrl
- ingenic,jz4780-pinctrl
- ingenic,x1000-pinctrl
- ingenic,x1500-pinctrl
- ingenic,x1830-pinctrl
- ingenic,jz4740-pinctrl
- ingenic,jz4725b-pinctrl
- ingenic,jz4760-pinctrl
- ingenic,jz4770-pinctrl
- ingenic,jz4780-pinctrl
- ingenic,x1000-pinctrl
- ingenic,x1500-pinctrl
- ingenic,x1830-pinctrl
- items:
- const: ingenic,jz4760b-pinctrl
- const: ingenic,jz4760-pinctrl
- const: ingenic,jz4760b-pinctrl
- const: ingenic,jz4760-pinctrl
- items:
- const: ingenic,x1000e-pinctrl
- const: ingenic,x1000-pinctrl
- const: ingenic,x1000e-pinctrl
- const: ingenic,x1000-pinctrl
reg:
maxItems: 1
......
......@@ -60,8 +60,8 @@ patternProperties:
oneOf:
- pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
qdsd_data3 ]
sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
qdsd_data3 ]
minItems: 1
maxItems: 4
......@@ -70,31 +70,31 @@ patternProperties:
Specify the alternative function to be configured for the specified
pins.
enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi,
blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c,
blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi,
blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
......
......@@ -76,22 +76,22 @@ patternProperties:
pins.
enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
......
......@@ -48,8 +48,8 @@ properties:
st,package:
description:
Indicates the SOC package used.
More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
Indicates the SOC package used.
More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8]
......
......@@ -58,13 +58,13 @@ properties:
power-domains:
description:
A phandle and PM domain specifier as defined by bindings of the power
controller specified by phandle. Some power domains might be powered
from another power domain (or have other hardware specific
dependencies). For representing such dependency a standard PM domain
consumer binding is used. When provided, all domains created
by the given provider should be subdomains of the domain specified
by this binding.
A phandle and PM domain specifier as defined by bindings of the power
controller specified by phandle. Some power domains might be powered
from another power domain (or have other hardware specific
dependencies). For representing such dependency a standard PM domain
consumer binding is used. When provided, all domains created
by the given provider should be subdomains of the domain specified
by this binding.
required:
- "#power-domain-cells"
......
......@@ -44,9 +44,9 @@ required:
anyOf:
- required:
- gpios
- gpios
- required:
- charge-status-gpios
- charge-status-gpios
additionalProperties: false
......
......@@ -76,8 +76,7 @@ patternProperties:
"^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
description: List of regulators and its properties
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
additionalProperties: false
......
......@@ -29,7 +29,7 @@ properties:
Short-circuit interrupt for lab.
required:
- interrupts
- interrupts
ibb:
type: object
......@@ -42,7 +42,7 @@ properties:
Short-circuit interrupt for lab.
required:
- interrupts
- interrupts
required:
- compatible
......
......@@ -118,16 +118,16 @@ else:
- const: l1dram
required:
- compatible
- reg
- reg-names
- ti,sci
- ti,sci-dev-id
- ti,sci-proc-ids
- resets
- firmware-name
- mboxes
- memory-region
- compatible
- reg
- reg-names
- ti,sci
- ti,sci-dev-id
- ti,sci-proc-ids
- resets
- firmware-name
- mboxes
- memory-region
unevaluatedProperties: false
......
......@@ -24,9 +24,9 @@ properties:
compatible:
items:
- enum:
- fsl,imx7d-src
- fsl,imx8mq-src
- fsl,imx8mp-src
- fsl,imx7d-src
- fsl,imx8mq-src
- fsl,imx8mp-src
- const: syscon
reg:
......
......@@ -16,16 +16,16 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-rtc
- ingenic,jz4760-rtc
- ingenic,jz4740-rtc
- ingenic,jz4760-rtc
- items:
- const: ingenic,jz4725b-rtc
- const: ingenic,jz4740-rtc
- const: ingenic,jz4725b-rtc
- const: ingenic,jz4740-rtc
- items:
- enum:
- ingenic,jz4770-rtc
- ingenic,jz4780-rtc
- const: ingenic,jz4760-rtc
- enum:
- ingenic,jz4770-rtc
- ingenic,jz4780-rtc
- const: ingenic,jz4760-rtc
reg:
maxItems: 1
......
......@@ -16,18 +16,18 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-uart
- ingenic,jz4760-uart
- ingenic,jz4780-uart
- ingenic,x1000-uart
- ingenic,jz4740-uart
- ingenic,jz4760-uart
- ingenic,jz4780-uart
- ingenic,x1000-uart
- items:
- enum:
- ingenic,jz4770-uart
- ingenic,jz4775-uart
- const: ingenic,jz4760-uart
- enum:
- ingenic,jz4770-uart
- ingenic,jz4775-uart
- const: ingenic,jz4760-uart
- items:
- const: ingenic,jz4725b-uart
- const: ingenic,jz4740-uart
- const: ingenic,jz4725b-uart
- const: ingenic,jz4740-uart
reg:
maxItems: 1
......
......@@ -97,13 +97,13 @@ allOf:
clock-names:
oneOf:
- items:
- const: t0_clk
- const: slow_clk
- const: t0_clk
- const: slow_clk
- items:
- const: t0_clk
- const: t1_clk
- const: t2_clk
- const: slow_clk
- const: t0_clk
- const: t1_clk
- const: t2_clk
- const: slow_clk
required:
- compatible
......
......@@ -7,8 +7,8 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: GENI Serial Engine QUP Wrapper Controller
maintainers:
- Mukesh Savaliya <msavaliy@codeaurora.org>
- Akash Asthana <akashast@codeaurora.org>
- Mukesh Savaliya <msavaliy@codeaurora.org>
- Akash Asthana <akashast@codeaurora.org>
description: |
Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
......@@ -38,10 +38,10 @@ properties:
- description: Slave AHB Clock
"#address-cells":
const: 2
const: 2
"#size-cells":
const: 2
const: 2
ranges: true
......@@ -79,15 +79,15 @@ patternProperties:
maxItems: 1
interconnects:
minItems: 2
maxItems: 3
minItems: 2
maxItems: 3
interconnect-names:
minItems: 2
items:
- const: qup-core
- const: qup-config
- const: qup-memory
minItems: 2
items:
- const: qup-core
- const: qup-config
- const: qup-memory
required:
- reg
......@@ -111,10 +111,10 @@ patternProperties:
maxItems: 1
"#address-cells":
const: 1
const: 1
"#size-cells":
const: 0
const: 0
required:
- compatible
......@@ -136,10 +136,10 @@ patternProperties:
maxItems: 1
"#address-cells":
const: 1
const: 1
"#size-cells":
const: 0
const: 0
clock-frequency:
description: Desired I2C bus clock frequency in Hz.
......
......@@ -19,12 +19,11 @@ properties:
compatible:
items:
- enum:
- amlogic,aiu-gxbb
- amlogic,aiu-gxl
- amlogic,aiu-meson8
- amlogic,aiu-meson8b
- const:
amlogic,aiu
- amlogic,aiu-gxbb
- amlogic,aiu-gxl
- amlogic,aiu-meson8
- amlogic,aiu-meson8b
- const: amlogic,aiu
clocks:
items:
......
......@@ -19,13 +19,11 @@ properties:
compatible:
oneOf:
- items:
- const:
amlogic,g12a-toacodec
- const: amlogic,g12a-toacodec
- items:
- enum:
- amlogic,sm1-toacodec
- const:
amlogic,g12a-toacodec
- enum:
- amlogic,sm1-toacodec
- const: amlogic,g12a-toacodec
reg:
maxItems: 1
......
......@@ -11,7 +11,7 @@ maintainers:
properties:
compatible:
const: cirrus,cs42l51
const: cirrus,cs42l51
reg:
maxItems: 1
......
......@@ -16,13 +16,13 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-i2s
- ingenic,jz4760-i2s
- ingenic,jz4770-i2s
- ingenic,jz4780-i2s
- ingenic,jz4740-i2s
- ingenic,jz4760-i2s
- ingenic,jz4770-i2s
- ingenic,jz4780-i2s
- items:
- const: ingenic,jz4725b-i2s
- const: ingenic,jz4740-i2s
- const: ingenic,jz4725b-i2s
- const: ingenic,jz4740-i2s
'#sound-dai-cells':
const: 0
......
......@@ -11,23 +11,21 @@ maintainers:
properties:
compatible:
const: maxim,max98390
const: maxim,max98390
reg:
maxItems: 1
description: I2C address of the device.
maxim,temperature_calib:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
description: The calculated temperature data was measured while doing the calibration.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 65535
maxim,r0_calib:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
description: This is r0 calibration data which was measured in factory mode.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 8388607
......
......@@ -48,8 +48,7 @@ properties:
sound-name-prefix:
pattern: "^DSPK[1-9]$"
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
description:
Used as prefix for sink/source names of the component. Must be a
unique string among multiple instances of the same component.
......
......@@ -49,8 +49,7 @@ properties:
sound-name-prefix:
pattern: "^DMIC[1-9]$"
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
description:
used as prefix for sink/source names of the component. Must be a
unique string among multiple instances of the same component.
......
......@@ -67,8 +67,7 @@ properties:
sound-name-prefix:
pattern: "^I2S[1-9]$"
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
description:
Used as prefix for sink/source names of the component. Must be a
unique string among multiple instances of the same component.
......
......@@ -19,16 +19,16 @@ properties:
- const: rockchip,rk3066-i2s
- items:
- enum:
- rockchip,px30-i2s
- rockchip,rk3036-i2s
- rockchip,rk3188-i2s
- rockchip,rk3228-i2s
- rockchip,rk3288-i2s
- rockchip,rk3308-i2s
- rockchip,rk3328-i2s
- rockchip,rk3366-i2s
- rockchip,rk3368-i2s
- rockchip,rk3399-i2s
- rockchip,px30-i2s
- rockchip,rk3036-i2s
- rockchip,rk3188-i2s
- rockchip,rk3228-i2s
- rockchip,rk3288-i2s
- rockchip,rk3308-i2s
- rockchip,rk3328-i2s
- rockchip,rk3366-i2s
- rockchip,rk3368-i2s
- rockchip,rk3399-i2s
- const: rockchip,rk3066-i2s
reg:
......@@ -55,8 +55,8 @@ properties:
oneOf:
- const: rx
- items:
- const: tx
- const: rx
- const: tx
- const: rx
power-domains:
maxItems: 1
......
......@@ -25,8 +25,8 @@ properties:
- const: rockchip,rk3399-spdif
- items:
- enum:
- rockchip,rk3188-spdif
- rockchip,rk3288-spdif
- rockchip,rk3188-spdif
- rockchip,rk3288-spdif
- const: rockchip,rk3066-spdif
reg:
......
......@@ -44,8 +44,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
description: Sets TDM RX capture edge.
enum:
- 0 # Rising edge
- 1 # Falling edge
- 0 # Rising edge
- 1 # Falling edge
'#sound-dai-cells':
const: 1
......
......@@ -37,13 +37,11 @@ properties:
ti,cpb-mcasp:
description: phandle to McASP used on CPB
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
ti,cpb-codec:
description: phandle to the pcm3168a codec used on the CPB
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
clocks:
items:
......
......@@ -50,28 +50,23 @@ properties:
ti,cpb-mcasp:
description: phandle to McASP used on CPB
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
ti,cpb-codec:
description: phandle to the pcm3168a codec used on the CPB
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
ti,ivi-mcasp:
description: phandle to McASP used on IVI
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
ti,ivi-codec-a:
description: phandle to the pcm3168a-A codec on the expansion board
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
ti,ivi-codec-b:
description: phandle to the pcm3168a-B codec on the expansion board
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
clocks:
items:
......
......@@ -32,32 +32,32 @@ properties:
reg:
maxItems: 1
description: |
I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
reset-gpios:
description: |
GPIO used for hardware reset.
GPIO used for hardware reset.
areg-supply:
description: |
Regulator with AVDD at 3.3V. If not defined then the internal regulator
is enabled.
description: |
Regulator with AVDD at 3.3V. If not defined then the internal regulator
is enabled.
ti,mic-bias-source:
description: |
Indicates the source for MIC Bias.
0 - Mic bias is set to VREF
1 - Mic bias is set to VREF × 1.096
6 - Mic bias is set to AVDD
Indicates the source for MIC Bias.
0 - Mic bias is set to VREF
1 - Mic bias is set to VREF × 1.096
6 - Mic bias is set to AVDD
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 6]
ti,vref-source:
description: |
Indicates the source for MIC Bias.
0 - Set VREF to 2.75V
1 - Set VREF to 2.5V
2 - Set VREF to 1.375V
Indicates the source for MIC Bias.
0 - Set VREF to 2.75V
1 - Set VREF to 2.5V
2 - Set VREF to 1.375V
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
......@@ -109,7 +109,7 @@ properties:
default: [0, 0, 0, 0]
patternProperties:
'^ti,gpo-config-[1-4]$':
'^ti,gpo-config-[1-4]$':
$ref: /schemas/types.yaml#/definitions/uint32-array
description: |
Defines the configuration and output driver for the general purpose
......
......@@ -22,10 +22,10 @@ properties:
- const: allwinner,sun6i-a31-spi
- const: allwinner,sun8i-h3-spi
- items:
- enum:
- allwinner,sun8i-r40-spi
- allwinner,sun50i-h6-spi
- const: allwinner,sun8i-h3-spi
- enum:
- allwinner,sun8i-r40-spi
- allwinner,sun50i-h6-spi
- const: allwinner,sun8i-h3-spi
reg:
maxItems: 1
......
......@@ -23,19 +23,19 @@ properties:
- const: fsl,imx51-ecspi
- const: fsl,imx53-ecspi
- items:
- enum:
- fsl,imx50-ecspi
- fsl,imx6q-ecspi
- fsl,imx6sx-ecspi
- fsl,imx6sl-ecspi
- fsl,imx6sll-ecspi
- fsl,imx6ul-ecspi
- fsl,imx7d-ecspi
- fsl,imx8mq-ecspi
- fsl,imx8mm-ecspi
- fsl,imx8mn-ecspi
- fsl,imx8mp-ecspi
- const: fsl,imx51-ecspi
- enum:
- fsl,imx50-ecspi
- fsl,imx6q-ecspi
- fsl,imx6sx-ecspi
- fsl,imx6sl-ecspi
- fsl,imx6sll-ecspi
- fsl,imx6ul-ecspi
- fsl,imx7d-ecspi
- fsl,imx8mq-ecspi
- fsl,imx8mm-ecspi
- fsl,imx8mn-ecspi
- fsl,imx8mp-ecspi
- const: fsl,imx51-ecspi
reg:
maxItems: 1
......
......@@ -33,4 +33,4 @@ examples:
reg = <0x1f000000 0x10>;
};
...
\ No newline at end of file
...
......@@ -43,47 +43,47 @@ properties:
maxItems: 1
required:
- compatible
- reg
- spi-max-frequency
- mux-controls
- compatible
- reg
- spi-max-frequency
- mux-controls
examples:
- |
#include <dt-bindings/gpio/gpio.h>
mux: mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
- |
#include <dt-bindings/gpio/gpio.h>
mux: mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
};
mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
};
spi {
#address-cells = <1>;
#size-cells = <0>;
spi@0 {
compatible = "spi-mux";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <100000000>;
spi {
#address-cells = <1>;
#size-cells = <0>;
spi@0 {
compatible = "spi-mux";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <100000000>;
mux-controls = <&mux>;
mux-controls = <&mux>;
spi-flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <40000000>;
};
spi-flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <40000000>;
};
spi-device@1 {
compatible = "lineartechnology,ltc2488";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <10000000>;
};
};
};
spi-device@1 {
compatible = "lineartechnology,ltc2488";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <10000000>;
};
};
};
......@@ -26,13 +26,13 @@ properties:
- const: rockchip,rv1108-spi
- items:
- enum:
- rockchip,px30-spi
- rockchip,rk3188-spi
- rockchip,rk3288-spi
- rockchip,rk3308-spi
- rockchip,rk3328-spi
- rockchip,rk3368-spi
- rockchip,rk3399-spi
- rockchip,px30-spi
- rockchip,rk3188-spi
- rockchip,rk3288-spi
- rockchip,rk3308-spi
- rockchip,rk3328-spi
- rockchip,rk3368-spi
- rockchip,rk3399-spi
- const: rockchip,rk3066-spi
reg:
......
......@@ -44,9 +44,9 @@ select: true
properties:
"#cooling-cells":
description:
Must be 2, in order to specify minimum and maximum cooling state used in
the cooling-maps reference. The first cell is the minimum cooling state
and the second cell is the maximum cooling state requested.
Must be 2, in order to specify minimum and maximum cooling state used in
the cooling-maps reference. The first cell is the minimum cooling state
and the second cell is the maximum cooling state requested.
const: 2
examples:
......
......@@ -18,29 +18,28 @@ description: |
This binding describes the thermal idle node.
properties:
$nodename:
const: thermal-idle
description: |
A thermal-idle node describes the idle cooling device properties to
cool down efficiently the attached thermal zone.
'#cooling-cells':
const: 2
description: |
Must be 2, in order to specify minimum and maximum cooling state used in
the cooling-maps reference. The first cell is the minimum cooling state
and the second cell is the maximum cooling state requested.
duration-us:
description: |
The idle duration in microsecond the device should cool down.
exit-latency-us:
description: |
The exit latency constraint in microsecond for the injected
idle state for the device. It is the latency constraint to
apply when selecting an idle state from among all the present
ones.
$nodename:
const: thermal-idle
description: |
A thermal-idle node describes the idle cooling device properties to
cool down efficiently the attached thermal zone.
'#cooling-cells':
const: 2
description: |
Must be 2, in order to specify minimum and maximum cooling state used in
the cooling-maps reference. The first cell is the minimum cooling state
and the second cell is the maximum cooling state requested.
duration-us:
description: |
The idle duration in microsecond the device should cool down.
exit-latency-us:
description: |
The exit latency constraint in microsecond for the injected idle state
for the device. It is the latency constraint to apply when selecting an
idle state from among all the present ones.
required:
- '#cooling-cells'
......
......@@ -20,17 +20,17 @@ properties:
- const: fsl,imx31-gpt
- items:
- enum:
- fsl,imx25-gpt
- fsl,imx50-gpt
- fsl,imx51-gpt
- fsl,imx53-gpt
- fsl,imx6q-gpt
- fsl,imx25-gpt
- fsl,imx50-gpt
- fsl,imx51-gpt
- fsl,imx53-gpt
- fsl,imx6q-gpt
- const: fsl,imx31-gpt
- const: fsl,imx6dl-gpt
- items:
- enum:
- fsl,imx6sl-gpt
- fsl,imx6sx-gpt
- fsl,imx6sl-gpt
- fsl,imx6sx-gpt
- const: fsl,imx6dl-gpt
reg:
......
......@@ -49,16 +49,16 @@ properties:
compatible:
oneOf:
- items:
- enum:
- ingenic,jz4740-tcu
- ingenic,jz4725b-tcu
- ingenic,jz4770-tcu
- ingenic,x1000-tcu
- const: simple-mfd
- enum:
- ingenic,jz4740-tcu
- ingenic,jz4725b-tcu
- ingenic,jz4770-tcu
- ingenic,x1000-tcu
- const: simple-mfd
- items:
- const: ingenic,jz4780-tcu
- const: ingenic,jz4770-tcu
- const: simple-mfd
- const: ingenic,jz4780-tcu
- const: ingenic,jz4770-tcu
- const: simple-mfd
reg:
maxItems: 1
......@@ -113,13 +113,13 @@ patternProperties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-watchdog
- ingenic,jz4780-watchdog
- ingenic,jz4740-watchdog
- ingenic,jz4780-watchdog
- items:
- enum:
- ingenic,jz4770-watchdog
- ingenic,jz4725b-watchdog
- const: ingenic,jz4740-watchdog
- enum:
- ingenic,jz4770-watchdog
- ingenic,jz4725b-watchdog
- const: ingenic,jz4740-watchdog
reg:
maxItems: 1
......@@ -143,13 +143,13 @@ patternProperties:
compatible:
oneOf:
- enum:
- ingenic,jz4740-pwm
- ingenic,jz4725b-pwm
- ingenic,jz4740-pwm
- ingenic,jz4725b-pwm
- items:
- enum:
- ingenic,jz4770-pwm
- ingenic,jz4780-pwm
- const: ingenic,jz4740-pwm
- enum:
- ingenic,jz4770-pwm
- ingenic,jz4780-pwm
- const: ingenic,jz4740-pwm
reg:
maxItems: 1
......@@ -182,11 +182,11 @@ patternProperties:
compatible:
oneOf:
- enum:
- ingenic,jz4725b-ost
- ingenic,jz4770-ost
- ingenic,jz4725b-ost
- ingenic,jz4770-ost
- items:
- const: ingenic,jz4780-ost
- const: ingenic,jz4770-ost
- const: ingenic,jz4780-ost
- const: ingenic,jz4770-ost
reg:
maxItems: 1
......
......@@ -27,8 +27,8 @@ properties:
clocks:
minItems: 1
items:
- description: Timer ticks reference clock source
- description: APB interface clock source
- description: Timer ticks reference clock source
- description: APB interface clock source
clock-names:
minItems: 1
......
......@@ -298,7 +298,7 @@ properties:
- national,lm80
# Temperature sensor with integrated fan control
- national,lm85
# ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
# I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
- national,lm92
# i2c trusted platform module (TPM)
- nuvoton,npct501
......
......@@ -19,24 +19,24 @@ properties:
- const: snps,dwc2
- items:
- enum:
- rockchip,px30-usb
- rockchip,rk3036-usb
- rockchip,rk3188-usb
- rockchip,rk3228-usb
- rockchip,rk3288-usb
- rockchip,rk3328-usb
- rockchip,rk3368-usb
- rockchip,rv1108-usb
- rockchip,px30-usb
- rockchip,rk3036-usb
- rockchip,rk3188-usb
- rockchip,rk3228-usb
- rockchip,rk3288-usb
- rockchip,rk3328-usb
- rockchip,rk3368-usb
- rockchip,rv1108-usb
- const: rockchip,rk3066-usb
- const: snps,dwc2
- const: lantiq,arx100-usb
- const: lantiq,xrx200-usb
- items:
- enum:
- amlogic,meson8-usb
- amlogic,meson8b-usb
- amlogic,meson-gxbb-usb
- amlogic,meson-g12a-usb
- amlogic,meson8-usb
- amlogic,meson8b-usb
- amlogic,meson-gxbb-usb
- amlogic,meson-g12a-usb
- const: snps,dwc2
- const: amcc,dwc-otg
- const: snps,dwc2
......@@ -116,12 +116,13 @@ properties:
snps,need-phy-for-wake:
$ref: /schemas/types.yaml#/definitions/flag
description: If present indicates that the phy needs to be left on for remote wakeup during suspend.
description: If present indicates that the phy needs to be left on for
remote wakeup during suspend.
snps,reset-phy-on-wake:
$ref: /schemas/types.yaml#/definitions/flag
description: If present indicates that we need to reset the PHY when we detect a wakeup.
This is due to a hardware errata.
description: If present indicates that we need to reset the PHY when we
detect a wakeup. This is due to a hardware errata.
required:
- compatible
......
......@@ -80,7 +80,7 @@ properties:
companion:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle of a companion.
Phandle of a companion.
phys:
description: PHY specifier for the USB PHY
......
......@@ -16,11 +16,11 @@ properties:
compatible:
oneOf:
- enum:
- ingenic,jz4770-musb
- ingenic,jz4740-musb
- ingenic,jz4770-musb
- ingenic,jz4740-musb
- items:
- const: ingenic,jz4725b-musb
- const: ingenic,jz4740-musb
- const: ingenic,jz4725b-musb
- const: ingenic,jz4740-musb
reg:
maxItems: 1
......
......@@ -57,11 +57,11 @@ properties:
minItems: 4
maxItems: 5
items:
- const: dev
- const: ss
- const: ss_src
- const: fs_src
- const: hs_src
- const: dev
- const: ss
- const: ss_src
- const: fs_src
- const: hs_src
power-domains:
items:
......
......@@ -19,9 +19,9 @@ properties:
power-domains:
description:
PM domain provider node and an args specifier containing
the USB device id value. See,
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
PM domain provider node and an args specifier containing
the USB device id value. See,
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
clocks:
description: Clock phandles to usb2_refclk and lpm_clk
......
......@@ -13,8 +13,8 @@ properties:
compatible:
items:
- enum:
- ti,keystone-dwc3
- ti,am654-dwc3
- ti,keystone-dwc3
- ti,am654-dwc3
reg:
maxItems: 1
......
......@@ -993,7 +993,8 @@ patternProperties:
"^sst,.*":
description: Silicon Storage Technology, Inc.
"^sstar,.*":
description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
(formerly part of MStar Semiconductor, Inc.)
"^st,.*":
description: STMicroelectronics
"^starry,.*":
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment