Commit b0a08bec authored by Vandana Kannan's avatar Vandana Kannan Committed by Daniel Vetter

drm/i915/bxt: eDP Panel Power sequencing

Changes for BXT - added a IS_BROXTON check to use the macro related to PPS
registers for BXT.
BXT does not have PP_DIV register. Making changes to handle this.
Second set of PPS registers have been defined but will be used when VBT
provides a selection between the 2 sets of registers.

v2:
[Jani] Added 2nd set of PPS registers and the macro
Jani's review comments
	- remove reference in i915_suspend.c
	- Use BXT PP macro
Squashing all PPS related patches into one.

v3: Jani's review comments addressed
	- Use pp_ctl instead of pp
	- ironlake_get_pp_control() is not required for BXT
	- correct the use of && in the print statement
	- drop the shift in the print statement

v4: Jani's comments
	- modify ironlake_get_pp_control() - dont set unlock key for bxt

v5: Sonika's comments addressed
	- check alignment
	- move pp_ctrl_reg write (after ironlake_get_pp_control())
	to !IS_BROXTON case.
	- check before subtracting 1 for t11_t12
Signed-off-by: default avatarVandana Kannan <vandana.kannan@intel.com>
Signed-off-by: default avatarA.Sunil Kamath <sunil.kamath@intel.com>
Reviewed-by: default avatarSonika Jindal <sonika.jindal@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent ce52299c
......@@ -6391,6 +6391,8 @@ enum skl_disp_power_wells {
#define PCH_PP_CONTROL 0xc7204
#define PANEL_UNLOCK_REGS (0xabcd << 16)
#define PANEL_UNLOCK_MASK (0xffff << 16)
#define BXT_POWER_CYCLE_DELAY_MASK (0x1f0)
#define BXT_POWER_CYCLE_DELAY_SHIFT 4
#define EDP_FORCE_VDD (1 << 3)
#define EDP_BLC_ENABLE (1 << 2)
#define PANEL_POWER_RESET (1 << 1)
......@@ -6419,6 +6421,17 @@ enum skl_disp_power_wells {
#define PANEL_POWER_CYCLE_DELAY_MASK (0x1f)
#define PANEL_POWER_CYCLE_DELAY_SHIFT 0
/* BXT PPS changes - 2nd set of PPS registers */
#define _BXT_PP_STATUS2 0xc7300
#define _BXT_PP_CONTROL2 0xc7304
#define _BXT_PP_ON_DELAYS2 0xc7308
#define _BXT_PP_OFF_DELAYS2 0xc730c
#define BXT_PP_STATUS(n) ((!n) ? PCH_PP_STATUS : _BXT_PP_STATUS2)
#define BXT_PP_CONTROL(n) ((!n) ? PCH_PP_CONTROL : _BXT_PP_CONTROL2)
#define BXT_PP_ON_DELAYS(n) ((!n) ? PCH_PP_ON_DELAYS : _BXT_PP_ON_DELAYS2)
#define BXT_PP_OFF_DELAYS(n) ((!n) ? PCH_PP_OFF_DELAYS : _BXT_PP_OFF_DELAYS2)
#define PCH_DP_B 0xe4100
#define PCH_DPB_AUX_CH_CTL 0xe4110
#define PCH_DPB_AUX_CH_DATA1 0xe4114
......
......@@ -567,7 +567,9 @@ static u32 _pp_ctrl_reg(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (HAS_PCH_SPLIT(dev))
if (IS_BROXTON(dev))
return BXT_PP_CONTROL(0);
else if (HAS_PCH_SPLIT(dev))
return PCH_PP_CONTROL;
else
return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp));
......@@ -577,7 +579,9 @@ static u32 _pp_stat_reg(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (HAS_PCH_SPLIT(dev))
if (IS_BROXTON(dev))
return BXT_PP_STATUS(0);
else if (HAS_PCH_SPLIT(dev))
return PCH_PP_STATUS;
else
return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp));
......@@ -1703,8 +1707,10 @@ static u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
lockdep_assert_held(&dev_priv->pps_mutex);
control = I915_READ(_pp_ctrl_reg(intel_dp));
if (!IS_BROXTON(dev)) {
control &= ~PANEL_UNLOCK_MASK;
control |= PANEL_UNLOCK_REGS;
}
return control;
}
......@@ -5093,8 +5099,8 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
struct edp_power_seq cur, vbt, spec,
*final = &intel_dp->pps_delays;
u32 pp_on, pp_off, pp_div, pp;
int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
u32 pp_on, pp_off, pp_div = 0, pp_ctl = 0;
int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg = 0;
lockdep_assert_held(&dev_priv->pps_mutex);
......@@ -5102,7 +5108,16 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
if (final->t11_t12 != 0)
return;
if (HAS_PCH_SPLIT(dev)) {
if (IS_BROXTON(dev)) {
/*
* TODO: BXT has 2 sets of PPS registers.
* Correct Register for Broxton need to be identified
* using VBT. hardcoding for now
*/
pp_ctrl_reg = BXT_PP_CONTROL(0);
pp_on_reg = BXT_PP_ON_DELAYS(0);
pp_off_reg = BXT_PP_OFF_DELAYS(0);
} else if (HAS_PCH_SPLIT(dev)) {
pp_ctrl_reg = PCH_PP_CONTROL;
pp_on_reg = PCH_PP_ON_DELAYS;
pp_off_reg = PCH_PP_OFF_DELAYS;
......@@ -5118,12 +5133,14 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
/* Workaround: Need to write PP_CONTROL with the unlock key as
* the very first thing. */
pp = ironlake_get_pp_control(intel_dp);
I915_WRITE(pp_ctrl_reg, pp);
pp_ctl = ironlake_get_pp_control(intel_dp);
pp_on = I915_READ(pp_on_reg);
pp_off = I915_READ(pp_off_reg);
if (!IS_BROXTON(dev)) {
I915_WRITE(pp_ctrl_reg, pp_ctl);
pp_div = I915_READ(pp_div_reg);
}
/* Pull timing values out of registers */
cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
......@@ -5138,8 +5155,17 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
PANEL_POWER_DOWN_DELAY_SHIFT;
if (IS_BROXTON(dev)) {
u16 tmp = (pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
BXT_POWER_CYCLE_DELAY_SHIFT;
if (tmp > 0)
cur.t11_t12 = (tmp - 1) * 1000;
else
cur.t11_t12 = 0;
} else {
cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
}
DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
......@@ -5196,13 +5222,23 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_on, pp_off, pp_div, port_sel = 0;
int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
int pp_on_reg, pp_off_reg, pp_div_reg;
int pp_on_reg, pp_off_reg, pp_div_reg = 0, pp_ctrl_reg;
enum port port = dp_to_dig_port(intel_dp)->port;
const struct edp_power_seq *seq = &intel_dp->pps_delays;
lockdep_assert_held(&dev_priv->pps_mutex);
if (HAS_PCH_SPLIT(dev)) {
if (IS_BROXTON(dev)) {
/*
* TODO: BXT has 2 sets of PPS registers.
* Correct Register for Broxton need to be identified
* using VBT. hardcoding for now
*/
pp_ctrl_reg = BXT_PP_CONTROL(0);
pp_on_reg = BXT_PP_ON_DELAYS(0);
pp_off_reg = BXT_PP_OFF_DELAYS(0);
} else if (HAS_PCH_SPLIT(dev)) {
pp_on_reg = PCH_PP_ON_DELAYS;
pp_off_reg = PCH_PP_OFF_DELAYS;
pp_div_reg = PCH_PP_DIVISOR;
......@@ -5228,9 +5264,16 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
(seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
/* Compute the divisor for the pp clock, simply match the Bspec
* formula. */
if (IS_BROXTON(dev)) {
pp_div = I915_READ(pp_ctrl_reg);
pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
pp_div |= (DIV_ROUND_UP((seq->t11_t12 + 1), 1000)
<< BXT_POWER_CYCLE_DELAY_SHIFT);
} else {
pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
<< PANEL_POWER_CYCLE_DELAY_SHIFT);
}
/* Haswell doesn't have any port selection bits for the panel
* power sequencer any more. */
......@@ -5247,11 +5290,16 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
I915_WRITE(pp_on_reg, pp_on);
I915_WRITE(pp_off_reg, pp_off);
if (IS_BROXTON(dev))
I915_WRITE(pp_ctrl_reg, pp_div);
else
I915_WRITE(pp_div_reg, pp_div);
DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
I915_READ(pp_on_reg),
I915_READ(pp_off_reg),
IS_BROXTON(dev) ?
(I915_READ(pp_ctrl_reg) & BXT_POWER_CYCLE_DELAY_MASK) :
I915_READ(pp_div_reg));
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment