Merge branch 'qed-Misc-fixes-in-the-interface-with-the-MFW'

Tomer Tayar says:

====================
qed: Misc fixes in the interface with the MFW

This patch series fixes several issues in the driver's interface with the
management FW (MFW).

v1->v2:
- Fix loop counter decrement to be pre instead of post.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_mcp.c

@@ -48,7 +48,7 @@
 #include "qed_reg_addr.h"
 #include "qed_sriov.h"
 
-#define CHIP_MCP_RESP_ITER_US 10
+#define QED_MCP_RESP_ITER_US	10
 
 #define QED_DRV_MB_MAX_RETRIES	(500 * 1000)	/* Account for 5 sec */
 #define QED_MCP_RESET_RETRIES	(50 * 1000)	/* Account for 500 msec */
@@ -183,18 +183,57 @@ int qed_mcp_free(struct qed_hwfn *p_hwfn)
 	return 0;
 }
 
+/* Maximum of 1 sec to wait for the SHMEM ready indication */
+#define QED_MCP_SHMEM_RDY_MAX_RETRIES	20
+#define QED_MCP_SHMEM_RDY_ITER_MS	50
+
 static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 {
 	struct qed_mcp_info *p_info = p_hwfn->mcp_info;
+	u8 cnt = QED_MCP_SHMEM_RDY_MAX_RETRIES;
+	u8 msec = QED_MCP_SHMEM_RDY_ITER_MS;
 	u32 drv_mb_offsize, mfw_mb_offsize;
 	u32 mcp_pf_id = MCP_PF_ID(p_hwfn);
 
 	p_info->public_base = qed_rd(p_hwfn, p_ptt, MISC_REG_SHARED_MEM_ADDR);
-	if (!p_info->public_base)
-		return 0;
+	if (!p_info->public_base) {
+		DP_NOTICE(p_hwfn,
+			  "The address of the MCP scratch-pad is not configured\n");
+		return -EINVAL;
+	}
 
 	p_info->public_base |= GRCBASE_MCP;
 
+	/* Get the MFW MB address and number of supported messages */
+	mfw_mb_offsize = qed_rd(p_hwfn, p_ptt,
+				SECTION_OFFSIZE_ADDR(p_info->public_base,
+						     PUBLIC_MFW_MB));
+	p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id);
+	p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt,
+					    p_info->mfw_mb_addr +
+					    offsetof(struct public_mfw_mb,
+						     sup_msgs));
+
+	/* The driver can notify that there was an MCP reset, and might read the
+	 * SHMEM values before the MFW has completed initializing them.
+	 * To avoid this, the "sup_msgs" field in the MFW mailbox is used as a
+	 * data ready indication.
+	 */
+	while (!p_info->mfw_mb_length && --cnt) {
+		msleep(msec);
+		p_info->mfw_mb_length =
+			(u16)qed_rd(p_hwfn, p_ptt,
+				    p_info->mfw_mb_addr +
+				    offsetof(struct public_mfw_mb, sup_msgs));
+	}
+
+	if (!cnt) {
+		DP_NOTICE(p_hwfn,
+			  "Failed to get the SHMEM ready notification after %d msec\n",
+			  QED_MCP_SHMEM_RDY_MAX_RETRIES * msec);
+		return -EBUSY;
+	}
+
 	/* Calculate the driver and MFW mailbox address */
 	drv_mb_offsize = qed_rd(p_hwfn, p_ptt,
 				SECTION_OFFSIZE_ADDR(p_info->public_base,
@@ -204,13 +243,6 @@ static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 		   "drv_mb_offsiz = 0x%x, drv_mb_addr = 0x%x mcp_pf_id = 0x%x\n",
 		   drv_mb_offsize, p_info->drv_mb_addr, mcp_pf_id);
 
-	/* Set the MFW MB address */
-	mfw_mb_offsize = qed_rd(p_hwfn, p_ptt,
-				SECTION_OFFSIZE_ADDR(p_info->public_base,
-						     PUBLIC_MFW_MB));
-	p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id);
-	p_info->mfw_mb_length =	(u16)qed_rd(p_hwfn, p_ptt, p_info->mfw_mb_addr);
-
 	/* Get the current driver mailbox sequence before sending
 	 * the first command
 	 */
@@ -285,9 +317,15 @@ static void qed_mcp_reread_offsets(struct qed_hwfn *p_hwfn,
 
 int qed_mcp_reset(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 {
-	u32 org_mcp_reset_seq, seq, delay = CHIP_MCP_RESP_ITER_US, cnt = 0;
+	u32 org_mcp_reset_seq, seq, delay = QED_MCP_RESP_ITER_US, cnt = 0;
 	int rc = 0;
 
+	if (p_hwfn->mcp_info->b_block_cmd) {
+		DP_NOTICE(p_hwfn,
+			  "The MFW is not responsive. Avoid sending MCP_RESET mailbox command.\n");
+		return -EBUSY;
+	}
+
 	/* Ensure that only a single thread is accessing the mailbox */
 	spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 
@@ -413,14 +451,41 @@ static void __qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		   (p_mb_params->cmd | seq_num), p_mb_params->param);
 }
 
+static void qed_mcp_cmd_set_blocking(struct qed_hwfn *p_hwfn, bool block_cmd)
+{
+	p_hwfn->mcp_info->b_block_cmd = block_cmd;
+
+	DP_INFO(p_hwfn, "%s sending of mailbox commands to the MFW\n",
+		block_cmd ? "Block" : "Unblock");
+}
+
+static void qed_mcp_print_cpu_info(struct qed_hwfn *p_hwfn,
+				   struct qed_ptt *p_ptt)
+{
+	u32 cpu_mode, cpu_state, cpu_pc_0, cpu_pc_1, cpu_pc_2;
+	u32 delay = QED_MCP_RESP_ITER_US;
+
+	cpu_mode = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE);
+	cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE);
+	cpu_pc_0 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER);
+	udelay(delay);
+	cpu_pc_1 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER);
+	udelay(delay);
+	cpu_pc_2 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER);
+
+	DP_NOTICE(p_hwfn,
+		  "MCP CPU info: mode 0x%08x, state 0x%08x, pc {0x%08x, 0x%08x, 0x%08x}\n",
+		  cpu_mode, cpu_state, cpu_pc_0, cpu_pc_1, cpu_pc_2);
+}
+
 static int
 _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		       struct qed_ptt *p_ptt,
 		       struct qed_mcp_mb_params *p_mb_params,
-		       u32 max_retries, u32 delay)
+		       u32 max_retries, u32 usecs)
 {
+	u32 cnt = 0, msecs = DIV_ROUND_UP(usecs, 1000);
 	struct qed_mcp_cmd_elem *p_cmd_elem;
-	u32 cnt = 0;
 	u16 seq_num;
 	int rc = 0;
 
@@ -443,7 +508,11 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 			goto err;
 
 		spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
-		udelay(delay);
+
+		if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP))
+			msleep(msecs);
+		else
+			udelay(usecs);
 	} while (++cnt < max_retries);
 
 	if (cnt >= max_retries) {
@@ -472,7 +541,11 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		 * The spinlock stays locked until the list element is removed.
 		 */
 
-		udelay(delay);
+		if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP))
+			msleep(msecs);
+		else
+			udelay(usecs);
+
 		spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 
 		if (p_cmd_elem->b_is_completed)
@@ -491,11 +564,15 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		DP_NOTICE(p_hwfn,
 			  "The MFW failed to respond to command 0x%08x [param 0x%08x].\n",
 			  p_mb_params->cmd, p_mb_params->param);
+		qed_mcp_print_cpu_info(p_hwfn, p_ptt);
 
 		spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 		qed_mcp_cmd_del_elem(p_hwfn, p_cmd_elem);
 		spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 
+		if (!QED_MB_FLAGS_IS_SET(p_mb_params, AVOID_BLOCK))
+			qed_mcp_cmd_set_blocking(p_hwfn, true);
+
 		return -EAGAIN;
 	}
 
@@ -507,7 +584,7 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		   "MFW mailbox: response 0x%08x param 0x%08x [after %d.%03d ms]\n",
 		   p_mb_params->mcp_resp,
 		   p_mb_params->mcp_param,
-		   (cnt * delay) / 1000, (cnt * delay) % 1000);
+		   (cnt * usecs) / 1000, (cnt * usecs) % 1000);
 
 	/* Clear the sequence number from the MFW response */
 	p_mb_params->mcp_resp &= FW_MSG_CODE_MASK;
@@ -525,7 +602,7 @@ static int qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 {
 	size_t union_data_size = sizeof(union drv_union_data);
 	u32 max_retries = QED_DRV_MB_MAX_RETRIES;
-	u32 delay = CHIP_MCP_RESP_ITER_US;
+	u32 usecs = QED_MCP_RESP_ITER_US;
 
 	/* MCP not initialized */
 	if (!qed_mcp_is_init(p_hwfn)) {
@@ -533,6 +610,13 @@ static int qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		return -EBUSY;
 	}
 
+	if (p_hwfn->mcp_info->b_block_cmd) {
+		DP_NOTICE(p_hwfn,
+			  "The MFW is not responsive. Avoid sending mailbox command 0x%08x [param 0x%08x].\n",
+			  p_mb_params->cmd, p_mb_params->param);
+		return -EBUSY;
+	}
+
 	if (p_mb_params->data_src_size > union_data_size ||
 	    p_mb_params->data_dst_size > union_data_size) {
 		DP_ERR(p_hwfn,
@@ -542,8 +626,13 @@ static int qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		return -EINVAL;
 	}
 
+	if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP)) {
+		max_retries = DIV_ROUND_UP(max_retries, 1000);
+		usecs *= 1000;
+	}
+
 	return _qed_mcp_cmd_and_union(p_hwfn, p_ptt, p_mb_params, max_retries,
-				      delay);
+				      usecs);
 }
 
 int qed_mcp_cmd(struct qed_hwfn *p_hwfn,
@@ -761,6 +850,7 @@ __qed_mcp_load_req(struct qed_hwfn *p_hwfn,
 	mb_params.data_src_size = sizeof(load_req);
 	mb_params.p_data_dst = &load_rsp;
 	mb_params.data_dst_size = sizeof(load_rsp);
+	mb_params.flags = QED_MB_FLAG_CAN_SLEEP | QED_MB_FLAG_AVOID_BLOCK;
 
 	DP_VERBOSE(p_hwfn, QED_MSG_SP,
 		   "Load Request: param 0x%08x [init_hw %d, drv_type %d, hsi_ver %d, pda 0x%04x]\n",
@@ -982,7 +1072,8 @@ int qed_mcp_load_req(struct qed_hwfn *p_hwfn,
 
 int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 {
-	u32 wol_param, mcp_resp, mcp_param;
+	struct qed_mcp_mb_params mb_params;
+	u32 wol_param;
 
 	switch (p_hwfn->cdev->wol_config) {
 	case QED_OV_WOL_DISABLED:
@@ -1000,8 +1091,12 @@ int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 		wol_param = DRV_MB_PARAM_UNLOAD_WOL_MCP;
 	}
 
-	return qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_UNLOAD_REQ, wol_param,
-			   &mcp_resp, &mcp_param);
+	memset(&mb_params, 0, sizeof(mb_params));
+	mb_params.cmd = DRV_MSG_CODE_UNLOAD_REQ;
+	mb_params.param = wol_param;
+	mb_params.flags = QED_MB_FLAG_CAN_SLEEP | QED_MB_FLAG_AVOID_BLOCK;
+
+	return qed_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params);
 }
 
 int qed_mcp_unload_done(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
@@ -2077,31 +2172,65 @@ qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn,
 	return rc;
 }
 
+/* A maximal 100 msec waiting time for the MCP to halt */
+#define QED_MCP_HALT_SLEEP_MS		10
+#define QED_MCP_HALT_MAX_RETRIES	10
+
 int qed_mcp_halt(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 {
-	u32 resp = 0, param = 0;
+	u32 resp = 0, param = 0, cpu_state, cnt = 0;
 	int rc;
 
 	rc = qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_MCP_HALT, 0, &resp,
 			 &param);
-	if (rc)
+	if (rc) {
 		DP_ERR(p_hwfn, "MCP response failure, aborting\n");
-
 		return rc;
+	}
+
+	do {
+		msleep(QED_MCP_HALT_SLEEP_MS);
+		cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE);
+		if (cpu_state & MCP_REG_CPU_STATE_SOFT_HALTED)
+			break;
+	} while (++cnt < QED_MCP_HALT_MAX_RETRIES);
+
+	if (cnt == QED_MCP_HALT_MAX_RETRIES) {
+		DP_NOTICE(p_hwfn,
+			  "Failed to halt the MCP [CPU_MODE = 0x%08x, CPU_STATE = 0x%08x]\n",
+			  qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE), cpu_state);
+		return -EBUSY;
+	}
+
+	qed_mcp_cmd_set_blocking(p_hwfn, true);
+
+	return 0;
 }
 
+#define QED_MCP_RESUME_SLEEP_MS	10
+
 int qed_mcp_resume(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 {
-	u32 value, cpu_mode;
+	u32 cpu_mode, cpu_state;
 
 	qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_STATE, 0xffffffff);
 
-	value = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE);
-	value &= ~MCP_REG_CPU_MODE_SOFT_HALT;
-	qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_MODE, value);
 	cpu_mode = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE);
+	cpu_mode &= ~MCP_REG_CPU_MODE_SOFT_HALT;
+	qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_MODE, cpu_mode);
+	msleep(QED_MCP_RESUME_SLEEP_MS);
+	cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE);
+
+	if (cpu_state & MCP_REG_CPU_STATE_SOFT_HALTED) {
+		DP_NOTICE(p_hwfn,
+			  "Failed to resume the MCP [CPU_MODE = 0x%08x, CPU_STATE = 0x%08x]\n",
+			  cpu_mode, cpu_state);
+		return -EBUSY;
+	}
 
-	return (cpu_mode & MCP_REG_CPU_MODE_SOFT_HALT) ? -EAGAIN : 0;
+	qed_mcp_cmd_set_blocking(p_hwfn, false);
+
+	return 0;
 }
 
 int qed_mcp_ov_update_current_config(struct qed_hwfn *p_hwfn,

drivers/net/ethernet/qlogic/qed/qed_mcp.h

@@ -635,11 +635,14 @@ struct qed_mcp_info {
 	 */
 	spinlock_t				cmd_lock;
 
+	/* Flag to indicate whether sending a MFW mailbox command is blocked */
+	bool					b_block_cmd;
+
 	/* Spinlock used for syncing SW link-changes and link-changes
 	 * originating from attention context.
 	 */
 	spinlock_t				link_lock;
-	bool					block_mb_sending;
+
 	u32					public_base;
 	u32					drv_mb_addr;
 	u32					mfw_mb_addr;
@@ -663,11 +666,17 @@ struct qed_mcp_mb_params {
 	u32 cmd;
 	u32 param;
 	void *p_data_src;
-	u8			data_src_size;
 	void *p_data_dst;
+	u8 data_src_size;
 	u8 data_dst_size;
 	u32 mcp_resp;
 	u32 mcp_param;
+	u32 flags;
+#define QED_MB_FLAG_CAN_SLEEP	(0x1 << 0)
+#define QED_MB_FLAG_AVOID_BLOCK	(0x1 << 1)
+#define QED_MB_FLAGS_IS_SET(params, flag) \
+	({ typeof(params) __params = (params); \
+	   (__params && (__params->flags & QED_MB_FLAG_ ## flag)); })
 };
 
 struct qed_drv_tlv_hdr {

drivers/net/ethernet/qlogic/qed/qed_reg_addr.h

@@ -562,8 +562,10 @@
 	0
 #define MCP_REG_CPU_STATE \
 	0xe05004UL
+#define MCP_REG_CPU_STATE_SOFT_HALTED	(0x1UL << 10)
 #define MCP_REG_CPU_EVENT_MASK \
 	0xe05008UL
+#define MCP_REG_CPU_PROGRAM_COUNTER	0xe0501cUL
 #define PGLUE_B_REG_PF_BAR0_SIZE \
 	0x2aae60UL
 #define PGLUE_B_REG_PF_BAR1_SIZE \