Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (72 commits)
  sh: SuperH Mobile CEU and camera platform data for AP325RXA
  sh: Update smc911x platform data for AP325RXA
  sh: SuperH Mobile LCDC platform data for AP325RXA
  sh: Add SuperH Mobile CEU platform data for Migo-R
  sh: Add SuperH Mobile LCDC platform data for Migo-R
  sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build.
  sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian.
  sh: Wire up new syscalls.
  sh: fix uImage Entry Point
  sh_keysc: remove request_mem_region() and release_mem_region()
  sh: Don't miss pending signals returning to user mode after signal processing
  sh: Use clk_always_enable() on sh7366
  sh: Use clk_always_enable() on sh7343 / SE77343
  sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722
  sh: Use clk_always_enable() on sh7723 / ap325rxa
  sh: Introduce clk_always_enable() function
  sh: Show all clocks and their state in /proc/clocks
  sh: Merge sh7343 and sh7722 clock code
  sh: Add SuperH Mobile MSTPCR bits to clock framework
  sh: Use arch_flags to simplify sh7722 siu clock code
  ...

arch/sh/Kconfig

@@ -477,6 +477,10 @@ config SH_RTS7751R2D
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
 
+config SH_RSK7203
+	bool "RSK7203"
+	depends on CPU_SUBTYPE_SH7203
+
 config SH_SDK7780
 	bool "SDK7780R3"
 	depends on CPU_SUBTYPE_SH7780
@@ -491,6 +495,21 @@ config SH_HIGHLANDER
 	select SYS_SUPPORTS_PCI
 	select IO_TRAPPED
 
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
@@ -498,6 +517,20 @@ config SH_MIGOR
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
           by Renesas System Solutions Asia Pte. Ltd.
 
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
 config SH_EDOSK7705
 	bool "EDOSK7705"
 	depends on CPU_SUBTYPE_SH7705
@@ -559,6 +592,7 @@ endmenu
 source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 source "arch/sh/boards/renesas/r7780rp/Kconfig"
 source "arch/sh/boards/renesas/sdk7780/Kconfig"
+source "arch/sh/boards/renesas/migor/Kconfig"
 source "arch/sh/boards/magicpanelr2/Kconfig"
 
 menu "Timer and clock configuration"

arch/sh/Kconfig.debug

@@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xff804000" if CPU_SUBTYPE_MXG
 	default "0xffc30000" if CPU_SUBTYPE_SHX3
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
-				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
+				CPU_SUBTYPE_SH7343
 	default "0xffe80000" if CPU_SH4
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203

arch/sh/Makefile

@@ -121,6 +121,10 @@ machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
 machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
 machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
 machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
+machdir-$(CONFIG_SH_RSK7203)			+= renesas/rsk7203
+machdir-$(CONFIG_SH_AP325RXA)			+= renesas/ap325rxa
+machdir-$(CONFIG_SH_SH7763RDP)			+= renesas/sh7763rdp
+machdir-$(CONFIG_SH_SH7785LCR)			+= renesas/sh7785lcr
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
 machdir-$(CONFIG_SH_LANDISK)			+= landisk
 machdir-$(CONFIG_SH_TITAN)			+= titan

arch/sh/boards/dreamcast/rtc.c

@@ -30,7 +30,7 @@
  *
  * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
  */
-void aica_rtc_gettimeofday(struct timespec *ts)
+static void aica_rtc_gettimeofday(struct timespec *ts)
 {
 	unsigned long val1, val2;
 
@@ -54,7 +54,7 @@ void aica_rtc_gettimeofday(struct timespec *ts)
  *
  * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
  */
-int aica_rtc_settimeofday(const time_t secs)
+static int aica_rtc_settimeofday(const time_t secs)
 {
 	unsigned long val1, val2;
 	unsigned long adj = secs + TWENTY_YEARS;

arch/sh/boards/renesas/ap325rxa/Makefile

+obj-y	:= setup.o

arch/sh/boards/renesas/ap325rxa/setup.c

+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+	.flags = SMC911X_USE_32BIT,
+	.irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+	[0] = {
+		.start	= 0xb6080000,
+		.end	= 0xb60fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 35,
+		.end	= 35,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc9118_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc9118_resources),
+	.resource	= smc9118_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+	{
+		 .name = "uboot",
+		 .offset = 0,
+		 .size = (1 * 1024 * 1024),
+		 .mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		 .name = "kernel",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = (2 * 1024 * 1024),
+	}, {
+		 .name = "other",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+	.width		= 2,
+	.parts		= ap325rxa_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= ap325rxa_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(ap325rxa_nor_flash_resources),
+	.dev		= {
+		.platform_data = &ap325rxa_nor_flash_data,
+	},
+};
+
+#define FPGA_LCDREG	0xB4100180
+#define FPGA_BKLREG	0xB4100212
+#define FPGA_LCDREG_VAL	0x0018
+#define PORT_PHCR	0xA405010E
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PZCR	0xA405014C
+#define PORT_HIZCRA	0xA4050158
+#define PORT_MSELCRB	0xA4050182
+#define PORT_PSDR	0xA405013E
+#define PORT_PZDR	0xA405016C
+#define PORT_PSELD	0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+	msleep(100);
+
+	/* ASD AP-320/325 LCD ON */
+	ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+	/* backlight */
+	ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+	ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+	ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB18,
+		.clock_divider = 1,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 40,
+			.right_margin = 160,
+			.hsync_len = 8,
+			.upper_margin = 63,
+			.lower_margin = 80,
+			.vsync_len = 1,
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.board_cfg = {
+			.display_on = ap320_wvga_power_on,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+static unsigned char camera_ncm03j_magic[] =
+{
+	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+	0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+	0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+	0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+	0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+	0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+	0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+	0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+	0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+	0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+	0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+	0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+	0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+	0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+	0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* no disable for now */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x6e;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ncm03j_magic[i];
+		buf[1] = camera_ncm03j_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+	.iface = 0,
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_UYVY,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.width = 640,
+		.height = 480,
+	},
+	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+	.name		= "soc_camera_platform",
+	.dev		= {
+		.platform_data	= &camera_info,
+	},
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+	&camera_device,
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+	i2c_register_board_info(0, ap325rxa_i2c_devices,
+				ARRAY_SIZE(ap325rxa_i2c_devices));
+ 
+	return platform_add_devices(ap325rxa_devices,
+				ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+	/* LCDC configuration */
+	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+	ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+	ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+	/* CEU */
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+	ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+	ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+	.mv_name = "AP-325RXA",
+	.mv_setup = ap325rxa_setup,
+};

arch/sh/boards/renesas/migor/Kconfig

+if SH_MIGOR
+
+choice
+	prompt "Migo-R LCD Panel Board Selection"
+	default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+	bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+	bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif

arch/sh/boards/renesas/migor/Makefile

 obj-y	 := setup.o
+obj-$(CONFIG_SH_MIGOR_QVGA)	+=  lcd_qvga.o

arch/sh/boards/renesas/migor/lcd_qvga.c

+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+	ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+	mdelay(2);
+	ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+	mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+	unsigned long tmp1, tmp2;
+
+	tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+	tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+	return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+		       unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+			struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+				unsigned short reg)
+{
+	unsigned long data;
+
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	data = sys_ops->read_data(sys_ops_handle);
+	return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			       unsigned short const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i += 2)
+		write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+	0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+	0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+	0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+	0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+	0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+	0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+	0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+	0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+	0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+	0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+	0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long xres = 320;
+	unsigned long yres = 240;
+	int k;
+
+	reset_lcd_module();
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+	if (read_reg16(sohandle, so, 0) != 0x1505)
+		return -ENODEV;
+
+	pr_info("Migo-R QVGA LCD Module detected.\n");
+
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+	write_reg16(sohandle, so, 0x00A4, 0x0001);
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+	mdelay(100);
+
+	migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+	write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+	write_reg16(sohandle, so, 0x0051, 0x00ef);
+	write_reg16(sohandle, so, 0x0052, 0x0000);
+	write_reg16(sohandle, so, 0x0053, xres - 1);
+
+	migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+	mdelay(40);
+
+	/* clear GRAM to avoid displaying garbage */
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+	for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+		write_reg16(sohandle, so, 0x0022, 0x0000);
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+	write_reg16(sohandle, so, 0x0007, 0x0173);
+	mdelay(40);
+
+	/* enable display */
+	write_reg(sohandle, so, 0x00, 0x22);
+	mdelay(100);
+	return 0;
+}

arch/sh/boards/renesas/migor/setup.c

@@ -15,9 +15,15 @@
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
 #include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
 #include <asm/migor.h>
 
 /* Address     IRQ  Size  Bus  Description
@@ -198,14 +204,237 @@ static struct platform_device migor_nand_flash_device = {
 	}
 };
 
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB16,
+		.clock_divider = 2,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 64,
+			.right_margin = 16,
+			.hsync_len = 120,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = 0,
+		},
+	}
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS16A,
+		.clock_divider = 10,
+		.lcd_cfg = {
+			.name = "PH240320T",
+			.xres = 320,
+			.yres = 240,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = FB_SYNC_HOR_HIGH_ACT,
+		},
+		.board_cfg = {
+			.setup_sys = migor_lcd_qvga_setup,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x06000a09,
+			.ldmt3r = 0x180e3418,
+		},
+	}
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(migor_lcdc_resources),
+	.resource	= migor_lcdc_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc_info,
+	},
+};
+
+static struct clk *camera_clk;
+
+static void camera_power_on(void)
+{
+	unsigned char value;
+
+	camera_clk = clk_get(NULL, "video_clk");
+	clk_set_rate(camera_clk, 24000000);
+	clk_enable(camera_clk);	/* start VIO_CKO */
+
+	mdelay(10);
+	value = ctrl_inb(PORT_PTDR);
+	value &= ~0x09;
+#ifndef CONFIG_SH_MIGOR_RTA_WVGA
+	value |= 0x01;
+#endif
+	ctrl_outb(value, PORT_PTDR);
+	mdelay(10);
+
+	ctrl_outb(value | 8, PORT_PTDR);
+}
+
+static void camera_power_off(void)
+{
+	clk_disable(camera_clk); /* stop VIO_CKO */
+	clk_put(camera_clk);
+
+	ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+}
+
+static unsigned char camera_ov772x_magic[] =
+{
+	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
+	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
+	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
+	0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
+	0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
+	0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
+	0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
+	0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
+	0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
+	0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
+	0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
+	0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
+	0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
+	0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
+	0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
+	0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
+	0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
+	0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
+	0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
+	0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
+	0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
+	0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
+	0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
+	0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
+	0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
+	0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
+	0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
+	0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
+	0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
+	0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
+	0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
+	0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
+	0x2c, 0x78,
+};
+
+static int ov772x_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* camera_power_off() is enough */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x21;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ov772x_magic[i];
+		buf[1] = camera_ov772x_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info ov772x_info = {
+	.iface = 0,
+	.format_name = "RGB565",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_RGB565,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.width = 320,
+		.height = 240,
+	},
+	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = ov772x_set_capture,
+};
+
+static struct platform_device migor_camera_device = {
+	.name		= "soc_camera_platform",
+	.dev	= {
+		.platform_data	= &ov772x_info,
+	},
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
+	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
+	.enable_camera = camera_power_on,
+	.disable_camera = camera_power_off,
+};
+
+static struct resource migor_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device migor_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
+	.resource	= migor_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
 static struct platform_device *migor_devices[] __initdata = {
 	&smc91x_eth_device,
 	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+	&migor_camera_device,
 	&migor_nor_flash_device,
 	&migor_nand_flash_device,
 };
 
-static struct i2c_board_info __initdata migor_i2c_devices[] = {
+static struct i2c_board_info migor_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rs5c372b", 0x32),
 	},
@@ -217,6 +446,12 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = {
 
 static int __init migor_devices_setup(void)
 {
+	clk_always_enable("mstp214"); /* KEYSC */
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
 	i2c_register_board_info(0, migor_i2c_devices,
 				ARRAY_SIZE(migor_i2c_devices));
  
@@ -235,20 +470,51 @@ static void __init migor_setup(char **cmdline_p)
 	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
 	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
 	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-	ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
 
 	/* NAND Flash */
 	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
 	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
 		  BSC_CS6ABCR);
 
-	/* I2C */
-	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
-
 	/* Touch Panel - Enable IRQ6 */
 	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
 	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
 	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	/* LCDC - WVGA - Enable RGB Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw(0x0000, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	/* LCDC - QVGA - Enable SYS Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+
+	/* CEU */
+	ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
+	ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
+	ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
+	ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
+	ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {

arch/sh/boards/renesas/rsk7203/Makefile

+obj-y	:= setup.o

arch/sh/boards/renesas/rsk7203/setup.c

+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct resource smc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x24000000 + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc911x_resources),
+	.resource	= smc911x_resources,
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+	.name		= "RSK+ Flash",
+	.size		= 0x400000,
+	.bankwidth	= 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+	int nr_parts = 0;
+
+	simple_map_init(&rsk7203_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+	nr_parts = parse_mtd_partitions(flash_mtd, probes,
+					&parsed_partitions, 0);
+	/* If there is no partition table, used the hard coded table */
+	if (nr_parts <= 0) {
+		flash_data.parts = rsk7203_partitions;
+		flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+	} else {
+		flash_data.nr_parts = nr_parts;
+		flash_data.parts = parsed_partitions;
+	}
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+	&smc911x_device,
+	&flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+	set_mtd_partitions();
+	return platform_add_devices(rsk7203_devices,
+				    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+	.mv_name        = "RSK+7203",
+};

arch/sh/boards/renesas/sh7763rdp/Makefile

+obj-y    := setup.o irq.o

arch/sh/boards/renesas/sh7763rdp/irq.c

+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sh7763rdp.h>
+
+#define INTC_BASE		(0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR	(INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1	(INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+	/* GPIO enabled */
+	ctrl_outl(1 << 25, INTC_INT2MSKCR);
+
+	/* enable GPIO interrupts */
+	ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+		  INTC_INT2PRI7);
+
+	/* USBH enabled */
+	ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+
+	/* GETHER enabled */
+	ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+
+	/* DMAC enabled */
+	ctrl_outl(1 << 8, INTC_INT2MSKCR);
+}

arch/sh/boards/renesas/sh7763rdp/setup.c

+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/sh7763rdp.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * 128 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * 128 * 1024),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+	.width = 2,
+	.parts = sh7763rdp_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = (64 * 1024 * 1024),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = sh7763rdp_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+	.dev = {
+		.platform_data = &sh7763rdp_nor_flash_data,
+	},
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+	&sh7763rdp_nor_flash_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+	return platform_add_devices(sh7763rdp_devices,
+				    ARRAY_SIZE(sh7763rdp_devices));
+}
+__initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+	/* Board version check */
+	if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+		printk(KERN_INFO "RTE Standard Configuration\n");
+	else
+		printk(KERN_INFO "RTA Standard Configuration\n");
+
+	/* USB pin select bits (clear bit 5-2 to 0) */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+	/* Select USB Host controller */
+	ctrl_outw(0x00, USB_USBHSC);
+
+	/* For LCD */
+	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+	/* set PTI5, bits 11-10 of PICR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
+	ctrl_outw(0, PORT_PKCR);
+	ctrl_outw(0, PORT_PLCR);
+	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+	/* For HAC */
+	/* bit3-0  0100:HAC & SSI1 enable */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+	/* bit14      1:SSI_HAC_CLK enable */
+	ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+	/* SH-Ether */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+
+	/* MMC */
+	/*selects SCIF and MMC other functions */
+	ctrl_outw(0x0001, PORT_PSEL0);
+	/* MMC clock operates */
+	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
+	ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+	.mv_name = "sh7763drp",
+	.mv_setup = sh7763rdp_setup,
+	.mv_nr_irqs = 112,
+	.mv_init_irq = init_sh7763rdp_IRQ,
+};

arch/sh/boards/renesas/sh7785lcr/Makefile

+obj-y	 := setup.o

arch/sh/boards/renesas/sh7785lcr/setup.c

+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PLD_LEDCR,
+		.end	= PLD_LEDCR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= R8A66597_ADDR,
+		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "r8a66597_hcd",
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= SM107_MEM_ADDR,
+		.end	= SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= SM107_REG_ADDR,
+		.end	= SM107_REG_ADDR + SM107_REG_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= 10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+	.pixclock	= 35714,	/* 28MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+	.pixclock	= 40000,	/* 25MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 2,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync		= 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_pnl,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT |
+			  SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_crt,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= 0,
+	.mclk		= 84 * 1000000,
+	.m1xclk		= 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= PCA9564_ADDR,
+		.end	= PCA9564_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+	.gpio			= 0,
+	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
+	.timeout		= 100,
+};
+
+static struct platform_device i2c_device = {
+	.name		= "i2c-pca-platform",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&r8a66597_usb_host_device,
+	&sm501_device,
+	&i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+	i2c_register_board_info(0, sh7785lcr_i2c_devices,
+				ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+	return platform_add_devices(sh7785lcr_devices,
+				    ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+
+	printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+	pm_power_off = sh7785lcr_power_off;
+
+	/* sm501 DRAM configuration */
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+	.mv_name		= "SH7785LCR",
+	.mv_setup		= sh7785lcr_setup,
+	.mv_init_irq		= init_sh7785lcr_IRQ,
+};
+

arch/sh/boards/se/7343/irq.c

 /*
- * arch/sh/boards/se/7343/irq.c
+ * linux/arch/sh/boards/se/7343/irq.c
  *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/mach/se7343.h>
+#include <asm/se7343.h>
 
-static void
-disable_intreq_irq(unsigned int irq)
+static void disable_se7343_irq(unsigned int irq)
 {
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val |= 1 << bit;
-	ctrl_outw(val, PA_CPLD_IMSK);
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
 }
 
-static void
-enable_intreq_irq(unsigned int irq)
+static void enable_se7343_irq(unsigned int irq)
 {
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val &= ~(1 << bit);
-	ctrl_outw(val, PA_CPLD_IMSK);
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
 }
 
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
-	enable_intreq_irq(irq);
-	return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
-	.typename = "FPGA-IRQ",
-	.startup = startup_intreq_irq,
-	.shutdown = shutdown_intreq_irq,
-	.enable = enable_intreq_irq,
-	.disable = disable_intreq_irq,
-	.ack = mask_and_ack_intreq_irq,
-	.end = end_intreq_irq
+static struct irq_chip se7343_irq_chip __read_mostly = {
+	.name           = "SE7343-FPGA",
+	.mask           = disable_se7343_irq,
+	.unmask         = enable_se7343_irq,
+	.mask_ack       = disable_se7343_irq,
 };
 
-static void
-make_intreq_irq(unsigned int irq)
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &intreq_irq_type;
-	disable_intreq_irq(irq);
-}
+	unsigned short intv = ctrl_inw(PA_CPLD_ST);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
 
-int
-shmse_irq_demux(int irq)
-{
-	int bit;
-	volatile u16 val;
+	intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
 
-	if (irq == IRQ5_IRQ) {
-		/* Read status Register */
-		val = ctrl_inw(PA_CPLD_ST);
-		bit = ffs(val);
-		if (bit != 0)
-			return OFFCHIP_IRQ_BASE + bit - 1;
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
 	}
-	return irq;
 }
 
-/* IRQ5 is multiplexed between the following sources:
- * 1. PC Card socket
- * 2. Extension slot
- * 3. USB Controller
- * 4. Serial Controller
- *
- * We configure IRQ5 as a cascade IRQ.
- */
-static struct irqaction irq5 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "IRQ5-cascade",
-};
-
-static struct ipr_data se7343_irq5_ipr_map[] = {
-	{ IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
-};
-static struct ipr_data se7343_siof0_vpu_ipr_map[] = {
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se7343_other_ipr_map[] = {
-	{ DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-	{ DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
-	/* I2C block */
-	{ IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-
-	{ IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-
-	/* SIOF */
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
-	/* SIU */
-	{ SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
-	/* VIO interrupt */
-	{ CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
-	/*MFI interrupt*/
-
-	{ MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY },
-
-	/* LCD controller */
-	{ LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
 /*
  * Initialize IRQ setting
  */
-void __init
-init_7343se_IRQ(void)
+void __init init_7343se_IRQ(void)
 {
-	/* Setup Multiplexed interrupts */
-	ctrl_outw(8, PA_CPLD_MODESET);	/* Set all CPLD interrupts to active
-					 * low.
-					 */
-	/* Mask all CPLD controller interrupts */
-	ctrl_outw(0x0fff, PA_CPLD_IMSK);
-
-	/* PC Card interrupts */
-	make_intreq_irq(PC_IRQ0);
-	make_intreq_irq(PC_IRQ1);
-	make_intreq_irq(PC_IRQ2);
-	make_intreq_irq(PC_IRQ3);
-
-	/* Extension Slot Interrupts */
-	make_intreq_irq(EXT_IRQ0);
-	make_intreq_irq(EXT_IRQ1);
-	make_intreq_irq(EXT_IRQ2);
-	make_intreq_irq(EXT_IRQ3);
-
-	/* USB Controller interrupts */
-	make_intreq_irq(USB_IRQ0);
-	make_intreq_irq(USB_IRQ1);
-
-	/* Serial Controller interrupts */
-	make_intreq_irq(UART_IRQ0);
-	make_intreq_irq(UART_IRQ1);
-
-	/* Setup all external interrupts to be active low */
-	ctrl_outw(0xaaaa, INTC_ICR1);
-
-	make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map));
-
-	setup_irq(IRQ5_IRQ, &irq5);
-	/* Set port control to use IRQ5 */
-	*(u16 *)0xA4050108 &= ~0xc;
-
-	make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map));
-
-	ctrl_outb(0x0f, INTC_IMCR5);	/* enable SCIF IRQ */
-
-	make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map));
-
-	ctrl_outw(0x2000, PA_MRSHPC + 0x0c);	/* mrshpc irq enable */
+	int i;
+
+	ctrl_outw(0, PA_CPLD_IMSK);	/* disable all irqs */
+	ctrl_outw(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+					      &se7343_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
 }

arch/sh/boards/se/7343/setup.c

 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 #include <asm/machvec.h>
 #include <asm/mach/se7343.h>
+#include <asm/heartbeat.h>
 #include <asm/irq.h>
-
-void init_7343se_IRQ(void);
+#include <asm/io.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -17,8 +18,8 @@ static struct resource smc91x_resources[] = {
 		 * shared with other devices via externel
 		 * interrupt controller in FPGA...
 		 */
-		.start	= EXT_IRQ2,
-		.end	= EXT_IRQ2,
+		.start	= SMC_IRQ,
+		.end	= SMC_IRQ,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -38,16 +39,65 @@ static struct resource heartbeat_resources[] = {
 	},
 };
 
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
 static struct platform_device heartbeat_device = {
 	.name		= "heartbeat",
 	.id		= -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
 	.num_resources	= ARRAY_SIZE(heartbeat_resources),
 	.resource	= heartbeat_resources,
 };
 
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
 static struct platform_device *sh7343se_platform_devices[] __initdata = {
 	&smc91x_device,
 	&heartbeat_device,
+	&nor_flash_device,
 };
 
 static int __init sh7343se_devices_setup(void)
@@ -55,10 +105,19 @@ static int __init sh7343se_devices_setup(void)
 	return platform_add_devices(sh7343se_platform_devices,
 				    ARRAY_SIZE(sh7343se_platform_devices));
 }
+device_initcall(sh7343se_devices_setup);
 
+/*
+ * Initialize the board
+ */
 static void __init sh7343se_setup(char **cmdline_p)
 {
-	device_initcall(sh7343se_devices_setup);
+	ctrl_outw(0xf900, FPGA_OUT);	/* FPGA */
+
+	ctrl_outw(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
 }
 
 /*
@@ -90,5 +149,4 @@ static struct sh_machine_vector mv_7343se __initmv = {
 	.mv_outsl = sh7343se_outsl,
 
 	.mv_init_irq = init_7343se_IRQ,
-	.mv_irq_demux = shmse_irq_demux,
 };

arch/sh/boards/se/770x/io.c

-/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
- *
- * linux/arch/sh/kernel/io_se.c
- *
+/*
  * Copyright (C) 2000  Kazumoto Kojima
  *
  * I/O routine for Hitachi SolutionEngine.
- *
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
 #include <asm/se.h>
 
-/* SH pcmcia io window base, start and end.  */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-
 /* MS7750 requires special versions of in*, out* routines, since
    PC-like io ports are located at upper half byte of 16-bit word which
    can be accessed only with 16-bit wide.  */
@@ -33,8 +21,6 @@ port2adr(unsigned int port)
 		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
 	else if (port >= 0x1000)
 		return (volatile __u16 *) (PA_83902 + (port << 1));
-	else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
 	else
 		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
 }
@@ -51,9 +37,7 @@ shifted_port(unsigned long port)
 
 unsigned char se_inb(unsigned long port)
 {
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
+	if (shifted_port(port))
 		return (*port2adr(port) >> 8);
 	else
 		return (*port2adr(port))&0xff;
@@ -63,9 +47,7 @@ unsigned char se_inb_p(unsigned long port)
 {
 	unsigned long v;
 
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
+	if (shifted_port(port))
 		v = (*port2adr(port) >> 8);
 	else
 		v = (*port2adr(port))&0xff;
@@ -75,8 +57,7 @@ unsigned char se_inb_p(unsigned long port)
 
 unsigned short se_inw(unsigned long port)
 {
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
+	if (port >= 0x2000)
 		return *port2adr(port);
 	else
 		maybebadio(port);
@@ -91,9 +72,7 @@ unsigned int se_inl(unsigned long port)
 
 void se_outb(unsigned char value, unsigned long port)
 {
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
+	if (shifted_port(port))
 		*(port2adr(port)) = value << 8;
 	else
 		*(port2adr(port)) = value;
@@ -101,9 +80,7 @@ void se_outb(unsigned char value, unsigned long port)
 
 void se_outb_p(unsigned char value, unsigned long port)
 {
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
+	if (shifted_port(port))
 		*(port2adr(port)) = value << 8;
 	else
 		*(port2adr(port)) = value;
@@ -112,8 +89,7 @@ void se_outb_p(unsigned char value, unsigned long port)
 
 void se_outw(unsigned short value, unsigned long port)
 {
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
+	if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
 		maybebadio(port);
@@ -129,11 +105,7 @@ void se_insb(unsigned long port, void *addr, unsigned long count)
 	volatile __u16 *p = port2adr(port);
 	__u8 *ap = addr;
 
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-		while (count--)
-			*ap++ = *bp;
-	} else if (shifted_port(port)) {
+	if (shifted_port(port)) {
 		while (count--)
 			*ap++ = *p >> 8;
 	} else {
@@ -160,11 +132,7 @@ void se_outsb(unsigned long port, const void *addr, unsigned long count)
 	volatile __u16 *p = port2adr(port);
 	const __u8 *ap = addr;
 
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); 
-		while (count--)
-			*bp = *ap++;
-	} else if (shifted_port(port)) {
+	if (shifted_port(port)) {
 		while (count--)
 			*p = *ap++ << 8;
 	} else {
@@ -177,6 +145,7 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count)
 {
 	volatile __u16 *p = port2adr(port);
 	const __u16 *ap = addr;
+
 	while (count--)
 		*p = *ap++;
 }

arch/sh/boards/se/770x/setup.c

@@ -14,8 +14,6 @@
 #include <asm/smc37c93x.h>
 #include <asm/heartbeat.h>
 
-void init_se_IRQ(void);
-
 /*
  * Configure the Super I/O chip
  */
@@ -73,7 +71,7 @@ static struct resource cf_ide_resources[] = {
 	},
 	[1] = {
 		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
 		.flags  = IORESOURCE_MEM,
 	},
 	[2] = {
@@ -115,9 +113,58 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh-eth",
+	.id	= 1,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+
 static struct platform_device *se_devices[] __initdata = {
 	&heartbeat_device,
 	&cf_ide_device,
+	&sh_eth0_device,
+	&sh_eth1_device,
 };
 
 static int __init se_devices_setup(void)

arch/sh/boards/se/7722/setup.c

@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 #include <asm/machvec.h>
+#include <asm/clock.h>
 #include <asm/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
@@ -145,6 +146,8 @@ static struct platform_device *se7722_devices[] __initdata = {
 
 static int __init se7722_devices_setup(void)
 {
+	clk_always_enable("mstp214"); /* KEYSC */
+
 	return platform_add_devices(se7722_devices,
 		ARRAY_SIZE(se7722_devices));
 }
@@ -154,11 +157,6 @@ static void __init se7722_setup(char **cmdline_p)
 {
 	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
 
-	ctrl_outl(0x00051001, MSTPCR0);
-	ctrl_outl(0x00000000, MSTPCR1);
-	/* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
-	ctrl_outl(0xffffb7c0, MSTPCR2);
-
 	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
 	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
 

arch/sh/boot/Makefile

@@ -40,7 +40,7 @@ KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(CONFIG_MEMORY_START) + \
-			$(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
+			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \

arch/sh/boot/compressed/Makefile_32

@@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)

arch/sh/boot/compressed/Makefile_64

@@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)

arch/sh/boot/compressed/piggy.S

+	.global	input_len, input_data
+	.data
+input_len:
+	.long	input_data_end - input_data
+input_data:
+	.incbin	"arch/sh/boot/compressed/vmlinux.bin.gz"
+input_data_end:
+	.end

arch/sh/boot/compressed/vmlinux.scr

-SECTIONS
-{
-  .data : { 
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .; 
-	*(.data) 
-	input_data_end = .; 
-	}
-}

arch/sh/drivers/pci/Makefile

@@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)		+= ops-lboxre2.o fixups-lboxre2.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= ops-se7780.o fixups-se7780.o
 obj-$(CONFIG_SH_CAYMAN)			+= ops-cayman.o
+obj-$(CONFIG_SH_SH7785LCR)		+= ops-sh7785lcr.o fixups-sh7785lcr.o

arch/sh/drivers/pci/fixups-sh7785lcr.c

+/*
+ * arch/sh/drivers/pci/fixups-sh7785lcr.c
+ *
+ * R0P7785LC0011RL PCI fixups
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on arch/sh/drivers/pci/fixups-r7780rp.c
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pci_fixup_pcic(void)
+{
+	pci_write_reg(0x000043ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+	pci_write_reg(0xfbb00047, SH7780_PCICMD);
+	pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+	pci_write_reg(0x00011912, SH7780_PCISVID);
+	pci_write_reg(0x08000000, SH7780_PCICSCR0);
+	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+	/* Set IOBR for windows containing area specified in pci.h */
+	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+		      SH7780_PCIIOBR);
+	pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
+
+	return 0;
+}

arch/sh/drivers/pci/ops-dreamcast.c

@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = {
 	  &gapspci_mem_resource, 0, 1 },
 	{ 0, }
 };
+EXPORT_SYMBOL(board_pci_channels);
 
 /*
  * The !gapspci_config_access case really shouldn't happen, ever, unless

arch/sh/drivers/pci/ops-sh7785lcr.c

+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas R0P7785LC0011RL board
+ * Based on arch/sh/drivers/pci/ops-r7780rp.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static char irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return irq_tab[slot];
+}
+
+static struct resource sh7785_io_resource = {
+	.name	= "SH7785_IO",
+	.start	= SH7780_PCI_IO_BASE,
+	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+	.name	= "SH7785_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7785_pci_map = {
+	.window0	= {
+		.base	= SH7780_CS2_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.window1	= {
+		.base	= SH7780_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7780_pcic_init(&sh7785_pci_map);
+}

arch/sh/drivers/pci/pci-auto.c

@@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
 }
 
 #define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_channel *hose,		\
+static int early_##rw##_config_##size(struct pci_channel *hose,		\
 	int top_bus, int bus, int devfn, int offset, type value)	\
 {									\
 	return pci_##rw##_config_##size(				\

arch/sh/drivers/pci/pci.c

@@ -135,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check and set
  *  the latency timer as it may not be properly set.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {

arch/sh/kernel/Makefile_32

@@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_BINFMT_ELF)	+= dump_task.o
+obj-$(CONFIG_ELF_CORE)		+= dump_task.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 
 EXTRA_CFLAGS += -Werror

arch/sh/kernel/cf-enabler.c

@@ -157,7 +157,7 @@ static int __init cf_init_se(void)
 }
 #endif
 
-int __init cf_init(void)
+static int __init cf_init(void)
 {
 	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
 		return cf_init_se();

arch/sh/kernel/cpu/clock.c

@@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk)
 	}
 }
 
-int __clk_enable(struct clk *clk)
+static int __clk_enable(struct clk *clk)
 {
 	/*
 	 * See if this is the first time we're enabling the clock, some
@@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(__clk_enable);
 
 int clk_enable(struct clk *clk)
 {
@@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref)
 	/* Nothing to do */
 }
 
-void __clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
 	int count = kref_put(&clk->kref, clk_kref_release);
 
@@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk)
 			clk->ops->disable(clk);
 	}
 }
-EXPORT_SYMBOL_GPL(__clk_disable);
 
 void clk_disable(struct clk *clk)
 {
@@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off,
 	list_for_each_entry_reverse(clk, &clock_list, node) {
 		unsigned long rate = clk_get_rate(clk);
 
-		/*
-		 * Don't bother listing dummy clocks with no ancestry
-		 * that only support enable and disable ops.
-		 */
-		if (unlikely(!rate && !clk->parent))
-			continue;
-
-		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
-			     rate / 1000000, (rate % 1000000) / 10000);
+		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
+			     rate / 1000000, (rate % 1000000) / 10000,
+			     ((clk->flags & CLK_ALWAYS_ENABLED) ||
+			      (atomic_read(&clk->kref.refcount) != 1)) ?
+			     "enabled" : "disabled");
 	}
 
 	return p - buf;

arch/sh/kernel/cpu/irq/intc.c

@@ -62,7 +62,7 @@ struct intc_desc_int {
 #endif
 
 static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned long ack_handle[NR_IRQS];
 #endif
 
@@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq)
 	}
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static void intc_mask_ack(unsigned int irq)
 {
 	struct intc_desc_int *d = get_intc_desc(irq);
@@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq)
 
 	if (handle) {
 		addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
+		switch (_INTC_FN(handle)) {
+		case REG_FN_MODIFY_BASE + 0:	/* 8bit */
 			ctrl_inb(addr);
-		ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+			ctrl_outb(0xff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 1:	/* 16bit */
+			ctrl_inw(addr);
+			ctrl_outw(0xffff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 3:	/* 32bit */
+			ctrl_inl(addr);
+			ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr);
+			break;
+		default:
+			BUG();
+			break;
+		}
 	}
 }
 #endif
@@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
 	return 0;
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned int __init intc_ack_data(struct intc_desc *desc,
 					  struct intc_desc_int *d,
 					  intc_enum enum_id)
@@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
 	/* irq should be disabled by default */
 	d->chip.mask(irq);
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs)
 		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
 #endif
@@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
 	d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
 #endif
 	d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
@@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->chip.mask_ack = intc_disable;
 	d->chip.set_type = intc_set_sense;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs) {
 		for (i = 0; i < desc->nr_ack_regs; i++)
 			k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);

arch/sh/kernel/cpu/sh2/entry.S

@@ -3,7 +3,7 @@
  *
  * The SH-2 exception entry
  *
- * Copyright (C) 2005,2006 Yoshinori Sato
+ * Copyright (C) 2005-2008 Yoshinori Sato
  * Copyright (C) 2005  AXE,Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -36,43 +36,41 @@ OFF_TRA	=  (16*4+6*4)
 #include <asm/entry-macros.S>
 
 ENTRY(exception_handler)
-	! already saved r0/r1
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
 	mov.l	r2,@-sp
 	mov.l	r3,@-sp
-	mov	r0,r1
 	cli
 	mov.l	$cpu_mode,r2
 	mov.l	@r2,r0
 	mov.l	@(5*4,r15),r3	! previous SR
-	shll2	r3		! set "S" flag
-	rotl	r0		! T <- "S" flag
-	rotl	r0		! "S" flag is LSB
-	rotcr	r3		! T -> r3:b30
-	shlr	r3
-	shlr	r0
-	bt/s	1f
-	 mov.l	r3,@(5*4,r15)	! copy cpu mode to SR
+	or	r0,r3		! set MD
+	tst	r0,r0
+	bf/s	1f		! previous mode check
+	 mov.l	r3,@(5*4,r15)	! update SR
 	! switch to kernel mode
-	mov	#1,r0
-	rotr	r0
-	rotr	r0
+	mov.l	__md_bit,r0
 	mov.l	r0,@r2		! enter kernel mode
 	mov.l	$current_thread_info,r2
 	mov.l	@r2,r2
-	mov	#0x20,r0
+	mov	#(THREAD_SIZE >> 8),r0
 	shll8	r0
 	add	r2,r0
 	mov	r15,r2		! r2 = user stack top
 	mov	r0,r15		! switch kernel stack
-	add	#-4,r15		! dummy
 	mov.l	r1,@-r15	! TRA
 	sts.l	macl, @-r15
 	sts.l	mach, @-r15
 	stc.l	gbr, @-r15
-	mov.l	@(4*4,r2),r0
-	mov.l	@(5*4,r2),r1
-	mov.l	r1,@-r15	! original SR
+	mov.l	@(5*4,r2),r0
+	mov.l	r0,@-r15	! original SR
 	sts.l	pr,@-r15
+	mov.l	@(4*4,r2),r0
 	mov.l	r0,@-r15	! original PC
 	mov	r2,r3
 	add	#(4+2)*4,r3	! rewind r0 - r3 + exception frame
@@ -88,14 +86,15 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r15
 	mov.l	r5,@-r15
 	mov.l	r4,@-r15
+	mov	r1,r9		! save TRA
 	mov	r2,r8		! copy user -> kernel stack
-	mov.l	@r8+,r3
+	mov.l	@(0,r8),r3
 	mov.l	r3,@-r15
-	mov.l	@r8+,r2
+	mov.l	@(4,r8),r2
 	mov.l	r2,@-r15
-	mov.l	@r8+,r1
+	mov.l	@(12,r8),r1
 	mov.l	r1,@-r15
-	mov.l	@r8+,r0
+	mov.l	@(8,r8),r0
 	bra	2f
 	 mov.l	r0,@-r15
 1:
@@ -107,10 +106,11 @@ ENTRY(exception_handler)
 	mov.l	r0,@-r15	
 	mov.l	@r2+,r0		! old R2
 	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R1
+	mov.l	@(4,r2),r0	! old R1
 	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R0
+	mov.l	@r2,r0		! old R0
 	mov.l	r0,@-r15
+	add	#8,r2
 	mov.l	@r2+,r3		! old PC
 	mov.l	@r2+,r0		! old SR
 	add	#-4,r2		! exception frame stub (sr)
@@ -135,14 +135,12 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r2
 	mov.l	r5,@-r2
 	mov.l	r4,@-r2
+	mov	r1,r9
 	mov.l	@(OFF_R0,r15),r0
 	mov.l	@(OFF_R1,r15),r1
 	mov.l	@(OFF_R2,r15),r2
 	mov.l	@(OFF_R3,r15),r3
 2:
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	@r8,r9	
 	mov	#64,r8
 	cmp/hs	r8,r9
 	bt	interrupt_entry	! vec >= 64 is interrupt
@@ -150,26 +148,14 @@ ENTRY(exception_handler)
 	cmp/hs	r8,r9
 	bt	trap_entry	! 64 > vec >= 32  is trap
 
-#if defined(CONFIG_SH_FPU)
-	mov     #13,r8
-	cmp/eq  r8,r9
-	bt      10f             ! fpu
-	nop
-#endif
-
 	mov.l	4f,r8
 	mov	r9,r4
 	shll2	r9
 	add	r9,r8
-	mov.l	@r8,r8
-	mov	#0,r9
-	cmp/eq	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
 	bf	3f
 	mov.l	8f,r8		! unhandled exception
-#if defined(CONFIG_SH_FPU)
-10:
-	mov.l	9f, r8		! unhandled exception
-#endif
 3:
 	mov.l	5f,r10
 	jmp	@r8
@@ -188,10 +174,7 @@ interrupt_entry:
 5:	.long	ret_from_exception
 6:	.long	ret_from_irq
 7:	.long	do_IRQ
-8:	.long	do_exception_error
-#ifdef CONFIG_SH_FPU
-9:	.long	fpu_error_trap_handler
-#endif
+8:	.long	exception_error
 
 trap_entry:
 	mov	#0x30,r8
@@ -200,23 +183,8 @@ trap_entry:
 	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
 1:	
 	shll2	r9			! TRA
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	r9,@r8
+	bra	system_call	! jump common systemcall entry
 	 mov	r9,r8
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	2f, r9
-	jsr	@r9
-	 nop
-#endif
-	sti
-	bra	system_call
-	 nop
-	
-	.align	2
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:	.long	trace_hardirqs_on
-#endif
 	
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	/* Unwind the stack and jmp to the debug entry */
@@ -240,7 +208,7 @@ ENTRY(sh_bios_handler)
 	mov.l	@r2,r2
 	stc	sr,r3
 	mov.l	r2,@r0
-	mov.l	r3,@r0
+	mov.l	r3,@(4,r0)
 	mov.l	r1,@(8,r0)	
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
@@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler)
 	mov.l	1f,r0
 	jmp	@r0
 	 mov	#0,r5				! writeaccess is unknown
-	.align	2
 
+	.align	2
 1:	.long	do_address_error
 
 restore_all:
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	1f, r0
-	jsr	@r0
-	 nop
-#endif
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
 	mov	r15,r0
 	mov.l	$cpu_mode,r2
 	mov	#OFF_SR,r3
 	mov.l	@(r0,r3),r1
-	mov.l	r1,@r2
+	mov.l	__md_bit,r3
+	and	r1,r3				! copy MD bit
+	mov.l	r3,@r2
 	shll2	r1				! clear MD bit
 	shlr2	r1
 	mov.l	@(OFF_SP,r0),r2
@@ -297,12 +273,6 @@ restore_all:
 	mov	#OFF_PC,r3
 	mov.l	@(r0,r3),r1
 	mov.l	r1,@r2				! set pc
-	add	#4*16+4,r0
-	lds.l	@r0+,pr
-	add	#4,r0				! skip sr
-	ldc.l	@r0+,gbr
-	lds.l	@r0+,mach
-	lds.l	@r0+,macl
 	get_current_thread_info r0, r1
 	mov.l	$current_thread_info,r1
 	mov.l	r0,@r1
@@ -326,9 +296,8 @@ restore_all:
 	 nop
 
 	.align 2
-#ifdef CONFIG_TRACE_IRQFLAGS
-1:     .long   trace_hardirqs_off
-#endif
+__md_bit:
+	.long	0x40000000
 $current_thread_info:
 	.long	__current_thread_info
 $cpu_mode:	

arch/sh/kernel/cpu/sh2/ex.S

@@ -18,16 +18,17 @@
 exception_entry:	
 no	=	0
 	.rept	256
-	mov.l	r0,@-sp
-	mov	#no,r0
+	mov.l	r1,@-sp
 	bra	exception_trampoline
-	and	#0xff,r0
+	mov	#no,r1
 no	=	no + 1
 	.endr
 exception_trampoline:
-	mov.l	r1,@-sp
-	mov.l	$exception_handler,r1
-	jmp	@r1
+	mov.l	r0,@-sp
+	mov.l	$exception_handler,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
 
 	.align	2
 $exception_entry:
@@ -41,6 +42,6 @@ $exception_handler:
 ENTRY(vbr_base)
 vector	=	0
 	.rept	256
-	.long	exception_entry + vector * 8
+	.long	exception_entry + vector * 6
 vector	=	vector + 1
 	.endr

arch/sh/kernel/cpu/sh2/setup-sh7619.c

@@ -96,8 +96,32 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct resource eth_resources[] = {
+	[0] = {
+		.start = 0xfb000000,
+		.end =   0xfb0001c8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 85,
+		.end = 85,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device eth_device = {
+	.name = "sh-eth",
+	.id	= -1,
+	.dev = {
+		.platform_data = (void *)1,
+	},
+	.num_resources = ARRAY_SIZE(eth_resources),
+	.resource = eth_resources,
+};
+
 static struct platform_device *sh7619_devices[] __initdata = {
 	&sci_device,
+	&eth_device,
 };
 
 static int __init sh7619_devices_setup(void)

arch/sh/kernel/cpu/sh2a/Makefile

@@ -4,7 +4,7 @@
 
 obj-y	:= common.o probe.o opcode_helper.o
 
-common-y	+= $(addprefix ../sh2/, ex.o entry.o)
+common-y	+= ex.o entry.o
 
 obj-$(CONFIG_SH_FPU)	+= fpu.o
 

arch/sh/kernel/cpu/sh2a/ex.S

+/*
+ * arch/sh/kernel/cpu/sh2a/ex.S
+ *
+ * The SH-2A exception vector table
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+
+! exception no 0 to 255
+exception_entry0:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline0
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline0:
+	mov.l	r0,@-sp
+	mov.l	1f,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
+	 
+	.align	2
+1:	.long	exception_handler
+
+! exception no 256 to 511
+exception_entry1:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline1
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline1:
+	mov.l	r0,@-sp
+	extu.b	r1,r1
+	movi20	#0x100,r0
+	add	r0,r1
+	mov.l	1f,r0
+	jmp	@r0
+	  extu.w	r1,r1
+	
+	.align	2
+1:	.long	exception_handler
+
+	!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry0 + vector * 6
+vector	=	vector + 1
+	.endr
+	.rept	256
+	.long	exception_entry1 + vector * 6
+vector	=	vector + 1
+	.endr

arch/sh/kernel/cpu/sh4a/Makefile

@@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o