Commit b2b3212b authored by Razvan Stefanescu's avatar Razvan Stefanescu Committed by Greg Kroah-Hartman

staging: fsl-dpaa2/ethsw: Add ethtool support

Add driver information, link details and hardware statistics to be
reported via ethtool -S.
Signed-off-by: default avatarRazvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 44baaa43
......@@ -7,4 +7,4 @@
obj-$(CONFIG_FSL_DPAA2_ETHSW) += dpaa2-ethsw.o
dpaa2-ethsw-objs := ethsw.o dpsw.o
dpaa2-ethsw-objs := ethsw.o ethsw-ethtool.o dpsw.o
......@@ -49,6 +49,8 @@
#define DPSW_CMDID_IF_SET_FLOODING DPSW_CMD_ID(0x047)
#define DPSW_CMDID_IF_SET_BROADCAST DPSW_CMD_ID(0x048)
#define DPSW_CMDID_IF_SET_LINK_CFG DPSW_CMD_ID(0x04C)
#define DPSW_CMDID_VLAN_ADD DPSW_CMD_ID(0x060)
#define DPSW_CMDID_VLAN_ADD_IF DPSW_CMD_ID(0x061)
#define DPSW_CMDID_VLAN_ADD_IF_UNTAGGED DPSW_CMD_ID(0x062)
......@@ -237,6 +239,17 @@ struct dpsw_cmd_if_set_max_frame_length {
__le16 frame_length;
};
struct dpsw_cmd_if_set_link_cfg {
/* cmd word 0 */
__le16 if_id;
u8 pad[6];
/* cmd word 1 */
__le32 rate;
__le32 pad1;
/* cmd word 2 */
__le64 options;
};
struct dpsw_cmd_if_get_link_state {
__le16 if_id;
};
......
......@@ -357,6 +357,38 @@ int dpsw_get_attributes(struct fsl_mc_io *mc_io,
return 0;
}
/**
* dpsw_if_set_link_cfg() - Set the link configuration.
* @mc_io: Pointer to MC portal's I/O object
* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
* @token: Token of DPSW object
* @if_id: Interface id
* @cfg: Link configuration
*
* Return: '0' on Success; Error code otherwise.
*/
int dpsw_if_set_link_cfg(struct fsl_mc_io *mc_io,
u32 cmd_flags,
u16 token,
u16 if_id,
struct dpsw_link_cfg *cfg)
{
struct mc_command cmd = { 0 };
struct dpsw_cmd_if_set_link_cfg *cmd_params;
/* prepare command */
cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_LINK_CFG,
cmd_flags,
token);
cmd_params = (struct dpsw_cmd_if_set_link_cfg *)cmd.params;
cmd_params->if_id = cpu_to_le16(if_id);
cmd_params->rate = cpu_to_le32(cfg->rate);
cmd_params->options = cpu_to_le64(cfg->options);
/* send command to mc*/
return mc_send_command(mc_io, &cmd);
}
/**
* dpsw_if_get_link_state - Return the link state
* @mc_io: Pointer to MC portal's I/O object
......
......@@ -219,6 +219,38 @@ enum dpsw_action {
DPSW_ACTION_REDIRECT = 1
};
/**
* Enable auto-negotiation
*/
#define DPSW_LINK_OPT_AUTONEG 0x0000000000000001ULL
/**
* Enable half-duplex mode
*/
#define DPSW_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL
/**
* Enable pause frames
*/
#define DPSW_LINK_OPT_PAUSE 0x0000000000000004ULL
/**
* Enable a-symmetric pause frames
*/
#define DPSW_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL
/**
* struct dpsw_link_cfg - Structure representing DPSW link configuration
* @rate: Rate
* @options: Mask of available options; use 'DPSW_LINK_OPT_<X>' values
*/
struct dpsw_link_cfg {
u32 rate;
u64 options;
};
int dpsw_if_set_link_cfg(struct fsl_mc_io *mc_io,
u32 cmd_flags,
u16 token,
u16 if_id,
struct dpsw_link_cfg *cfg);
/**
* struct dpsw_link_state - Structure representing DPSW link state
* @rate: Rate
......
// SPDX-License-Identifier: GPL-2.0
/*
* DPAA2 Ethernet Switch ethtool support
*
* Copyright 2014-2016 Freescale Semiconductor Inc.
* Copyright 2017-2018 NXP
*
*/
#include "ethsw.h"
static struct {
enum dpsw_counter id;
char name[ETH_GSTRING_LEN];
} ethsw_ethtool_counters[] = {
{DPSW_CNT_ING_FRAME, "rx frames"},
{DPSW_CNT_ING_BYTE, "rx bytes"},
{DPSW_CNT_ING_FLTR_FRAME, "rx filtered frames"},
{DPSW_CNT_ING_FRAME_DISCARD, "rx discarded frames"},
{DPSW_CNT_ING_BCAST_FRAME, "rx b-cast frames"},
{DPSW_CNT_ING_BCAST_BYTES, "rx b-cast bytes"},
{DPSW_CNT_ING_MCAST_FRAME, "rx m-cast frames"},
{DPSW_CNT_ING_MCAST_BYTE, "rx m-cast bytes"},
{DPSW_CNT_EGR_FRAME, "tx frames"},
{DPSW_CNT_EGR_BYTE, "tx bytes"},
{DPSW_CNT_EGR_FRAME_DISCARD, "tx discarded frames"},
};
#define ETHSW_NUM_COUNTERS ARRAY_SIZE(ethsw_ethtool_counters)
static void ethsw_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
struct ethsw_port_priv *port_priv = netdev_priv(netdev);
u16 version_major, version_minor;
int err;
strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver));
err = dpsw_get_api_version(port_priv->ethsw_data->mc_io, 0,
&version_major,
&version_minor);
if (err)
strlcpy(drvinfo->fw_version, "N/A",
sizeof(drvinfo->fw_version));
else
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
"%u.%u", version_major, version_minor);
strlcpy(drvinfo->bus_info, dev_name(netdev->dev.parent->parent),
sizeof(drvinfo->bus_info));
}
static int
ethsw_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *link_ksettings)
{
struct ethsw_port_priv *port_priv = netdev_priv(netdev);
struct dpsw_link_state state = {0};
int err = 0;
err = dpsw_if_get_link_state(port_priv->ethsw_data->mc_io, 0,
port_priv->ethsw_data->dpsw_handle,
port_priv->idx,
&state);
if (err) {
netdev_err(netdev, "ERROR %d getting link state", err);
goto out;
}
/* At the moment, we have no way of interrogating the DPMAC
* from the DPSW side or there may not exist a DPMAC at all.
* Report only autoneg state, duplexity and speed.
*/
if (state.options & DPSW_LINK_OPT_AUTONEG)
link_ksettings->base.autoneg = AUTONEG_ENABLE;
if (!(state.options & DPSW_LINK_OPT_HALF_DUPLEX))
link_ksettings->base.duplex = DUPLEX_FULL;
link_ksettings->base.speed = state.rate;
out:
return err;
}
static int
ethsw_set_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *link_ksettings)
{
struct ethsw_port_priv *port_priv = netdev_priv(netdev);
struct dpsw_link_cfg cfg = {0};
int err = 0;
netdev_dbg(netdev, "Setting link parameters...");
/* Due to a temporary MC limitation, the DPSW port must be down
* in order to be able to change link settings. Taking steps to let
* the user know that.
*/
if (netif_running(netdev)) {
netdev_info(netdev, "Sorry, interface must be brought down first.\n");
return -EACCES;
}
cfg.rate = link_ksettings->base.speed;
if (link_ksettings->base.autoneg == AUTONEG_ENABLE)
cfg.options |= DPSW_LINK_OPT_AUTONEG;
else
cfg.options &= ~DPSW_LINK_OPT_AUTONEG;
if (link_ksettings->base.duplex == DUPLEX_HALF)
cfg.options |= DPSW_LINK_OPT_HALF_DUPLEX;
else
cfg.options &= ~DPSW_LINK_OPT_HALF_DUPLEX;
err = dpsw_if_set_link_cfg(port_priv->ethsw_data->mc_io, 0,
port_priv->ethsw_data->dpsw_handle,
port_priv->idx,
&cfg);
if (err)
/* ethtool will be loud enough if we return an error; no point
* in putting our own error message on the console by default
*/
netdev_dbg(netdev, "ERROR %d setting link cfg", err);
return err;
}
static int ethsw_ethtool_get_sset_count(struct net_device *dev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
return ETHSW_NUM_COUNTERS;
default:
return -EOPNOTSUPP;
}
}
static void ethsw_ethtool_get_strings(struct net_device *netdev,
u32 stringset, u8 *data)
{
int i;
switch (stringset) {
case ETH_SS_STATS:
for (i = 0; i < ETHSW_NUM_COUNTERS; i++)
memcpy(data + i * ETH_GSTRING_LEN,
ethsw_ethtool_counters[i].name, ETH_GSTRING_LEN);
break;
}
}
static void ethsw_ethtool_get_stats(struct net_device *netdev,
struct ethtool_stats *stats,
u64 *data)
{
struct ethsw_port_priv *port_priv = netdev_priv(netdev);
int i, err;
memset(data, 0,
sizeof(u64) * ETHSW_NUM_COUNTERS);
for (i = 0; i < ETHSW_NUM_COUNTERS; i++) {
err = dpsw_if_get_counter(port_priv->ethsw_data->mc_io, 0,
port_priv->ethsw_data->dpsw_handle,
port_priv->idx,
ethsw_ethtool_counters[i].id,
&data[i]);
if (err)
netdev_err(netdev, "dpsw_if_get_counter[%s] err %d\n",
ethsw_ethtool_counters[i].name, err);
}
}
const struct ethtool_ops ethsw_port_ethtool_ops = {
.get_drvinfo = ethsw_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_link_ksettings = ethsw_get_link_ksettings,
.set_link_ksettings = ethsw_set_link_ksettings,
.get_strings = ethsw_ethtool_get_strings,
.get_ethtool_stats = ethsw_ethtool_get_stats,
.get_sset_count = ethsw_ethtool_get_sset_count,
};
......@@ -1376,6 +1376,7 @@ static int ethsw_probe_port(struct ethsw_core *ethsw, u16 port_idx)
SET_NETDEV_DEV(port_netdev, dev);
port_netdev->netdev_ops = &ethsw_port_ops;
port_netdev->ethtool_ops = &ethsw_port_ethtool_ops;
port_netdev->switchdev_ops = &ethsw_port_switchdev_ops;
/* Set MTU limits */
......
......@@ -33,6 +33,8 @@
#define ETHSW_MAX_FRAME_LENGTH (DPAA2_MFL - VLAN_ETH_HLEN - ETH_FCS_LEN)
#define ETHSW_L2_MAX_FRM(mtu) ((mtu) + VLAN_ETH_HLEN + ETH_FCS_LEN)
extern const struct ethtool_ops ethsw_port_ethtool_ops;
struct ethsw_core;
/* Per port private data */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment