Merge tag 'pwm/for-4.19-rc1' of...

Merge tag 'pwm/for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This contains mostly minor bug fixes as well as some new chip support
  for existing drivers"

* tag 'pwm/for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: mediatek: Add MT7628 support
  dt-bindings: pwm: Add MT7628 information
  dt-bindings: pwm: rcar: Add bindings for R-Car E3 support
  pwm: meson: Fix mux clock names
  pwm: stm32-lp: Remove useless loop in stm32_pwm_lp_remove()
  pwm: omap-dmtimer: Return -EPROBE_DEFER if no dmtimer platform data
  pwm: mxs: Switch to SPDX identifier
  dt-bindings: pwm: fsl-ftm: Add compatible string for i.MX8QM
  pwm: fsl-ftm: Enable support for the new SoC i.MX8QM
  pwm: fsl-ftm: Added the support of per-compatible data
  pwm: fsl-ftm: Added a dedicated IP interface clock
  pwm: cros-ec: Switch to SPDX identifier
  pwm: imx: Switch to SPDX identifier
  pwm: tiehrpwm: Fix disabling of output of PWMs
  pwm: tiehrpwm: Don't use emulation mode bits to control PWM output
  pwm: berlin: Don't use broken prescaler values

Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt

@@ -16,7 +16,10 @@ modes in device tree.
 
 
 Required properties:
-- compatible: Should be "fsl,vf610-ftm-pwm".
+- compatible : should be "fsl,<soc>-ftm-pwm" and one of the following
+   compatible strings:
+  - "fsl,vf610-ftm-pwm" for PWM compatible with the one integrated on VF610
+  - "fsl,imx8qm-ftm-pwm" for PWM compatible with the one integrated on i.MX8QM
 - reg: Physical base address and length of the controller's registers
 - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
   the cells format.

Documentation/devicetree/bindings/pwm/pwm-mediatek.txt

@@ -5,11 +5,13 @@ Required properties:
    - "mediatek,mt2712-pwm": found on mt2712 SoC.
    - "mediatek,mt7622-pwm": found on mt7622 SoC.
    - "mediatek,mt7623-pwm": found on mt7623 SoC.
+   - "mediatek,mt7628-pwm": found on mt7628 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
    the cell format.
  - clocks: phandle and clock specifier of the PWM reference clock.
- - clock-names: must contain the following:
+ - clock-names: must contain the following, except for MT7628 which
+                has no clocks
    - "top": the top clock generator
    - "main": clock used by the PWM core
    - "pwm1-8": the eight per PWM clocks for mt2712

Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt

@@ -12,6 +12,7 @@ Required Properties:
  - "renesas,pwm-r8a7795": for R-Car H3
  - "renesas,pwm-r8a7796": for R-Car M3-W
  - "renesas,pwm-r8a77965": for R-Car M3-N
+ - "renesas,pwm-r8a77990": for R-Car E3
  - "renesas,pwm-r8a77995": for R-Car D3
 - reg: base address and length of the registers block for the PWM.
 - #pwm-cells: should be 2. See pwm.txt in this directory for a description of

drivers/pwm/Kconfig

@@ -286,7 +286,7 @@ config PWM_MTK_DISP
 
 config PWM_MEDIATEK
 	tristate "MediaTek PWM support"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST
 	help
 	  Generic PWM framework driver for Mediatek ARM SoC.
 

drivers/pwm/pwm-berlin.c

@@ -21,8 +21,18 @@
 #define BERLIN_PWM_EN			0x0
 #define  BERLIN_PWM_ENABLE		BIT(0)
 #define BERLIN_PWM_CONTROL		0x4
-#define  BERLIN_PWM_PRESCALE_MASK	0x7
-#define  BERLIN_PWM_PRESCALE_MAX	4096
+/*
+ * The prescaler claims to support 8 different moduli, configured using the
+ * low three bits of PWM_CONTROL. (Sequentially, they are 1, 4, 8, 16, 64,
+ * 256, 1024, and 4096.)  However, the moduli from 4 to 1024 appear to be
+ * implemented by internally shifting TCNT left without adding additional
+ * bits. So, the max TCNT that actually works for a modulus of 4 is 0x3fff;
+ * for 8, 0x1fff; and so on. This means that those moduli are entirely
+ * useless, as we could just do the shift ourselves. The 4096 modulus is
+ * implemented with a real prescaler, so we do use that, but we treat it
+ * as a flag instead of pretending the modulus is actually configurable.
+ */
+#define  BERLIN_PWM_PRESCALE_4096	0x7
 #define  BERLIN_PWM_INVERT_POLARITY	BIT(3)
 #define BERLIN_PWM_DUTY			0x8
 #define BERLIN_PWM_TCNT			0xc
@@ -46,10 +56,6 @@ static inline struct berlin_pwm_chip *to_berlin_pwm_chip(struct pwm_chip *chip)
 	return container_of(chip, struct berlin_pwm_chip, chip);
 }
 
-static const u32 prescaler_table[] = {
-	1, 4, 8, 16, 64, 256, 1024, 4096
-};
-
 static inline u32 berlin_pwm_readl(struct berlin_pwm_chip *chip,
 				   unsigned int channel, unsigned long offset)
 {
@@ -86,33 +92,32 @@ static int berlin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm_dev,
 			     int duty_ns, int period_ns)
 {
 	struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip);
-	unsigned int prescale;
+	bool prescale_4096 = false;
 	u32 value, duty, period;
-	u64 cycles, tmp;
+	u64 cycles;
 
 	cycles = clk_get_rate(pwm->clk);
 	cycles *= period_ns;
 	do_div(cycles, NSEC_PER_SEC);
 
-	for (prescale = 0; prescale < ARRAY_SIZE(prescaler_table); prescale++) {
-		tmp = cycles;
-		do_div(tmp, prescaler_table[prescale]);
+	if (cycles > BERLIN_PWM_MAX_TCNT) {
+		prescale_4096 = true;
+		cycles >>= 12; // Prescaled by 4096
 
-		if (tmp <= BERLIN_PWM_MAX_TCNT)
-			break;
-	}
-
-	if (tmp > BERLIN_PWM_MAX_TCNT)
+		if (cycles > BERLIN_PWM_MAX_TCNT)
 			return -ERANGE;
+	}
 
-	period = tmp;
-	cycles = tmp * duty_ns;
+	period = cycles;
+	cycles *= duty_ns;
 	do_div(cycles, period_ns);
 	duty = cycles;
 
 	value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_CONTROL);
-	value &= ~BERLIN_PWM_PRESCALE_MASK;
-	value |= prescale;
+	if (prescale_4096)
+		value |= BERLIN_PWM_PRESCALE_4096;
+	else
+		value &= ~BERLIN_PWM_PRESCALE_4096;
 	berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_CONTROL);
 
 	berlin_pwm_writel(pwm, pwm_dev->hwpwm, duty, BERLIN_PWM_DUTY);

drivers/pwm/pwm-cros-ec.c

+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2016 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2, as published by
- * the Free Software Foundation.
- *
  * Expose a PWM controlled by the ChromeOS EC to the host processor.
+ *
+ * Copyright (C) 2016 Google, Inc.
  */
 
 #include <linux/module.h>

drivers/pwm/pwm-fsl-ftm.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pwm.h>
@@ -75,6 +76,10 @@ enum fsl_pwm_clk {
 	FSL_PWM_CLK_MAX
 };
 
+struct fsl_ftm_soc {
+	bool has_enable_bits;
+};
+
 struct fsl_pwm_chip {
 	struct pwm_chip chip;
 
@@ -87,7 +92,10 @@ struct fsl_pwm_chip {
 
 	int period_ns;
 
+	struct clk *ipg_clk;
 	struct clk *clk[FSL_PWM_CLK_MAX];
+
+	const struct fsl_ftm_soc *soc;
 };
 
 static inline struct fsl_pwm_chip *to_fsl_chip(struct pwm_chip *chip)
@@ -97,16 +105,32 @@ static inline struct fsl_pwm_chip *to_fsl_chip(struct pwm_chip *chip)
 
 static int fsl_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 {
+	int ret;
 	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
 
-	return clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
+	ret = clk_prepare_enable(fpc->ipg_clk);
+	if (!ret && fpc->soc->has_enable_bits) {
+		mutex_lock(&fpc->lock);
+		regmap_update_bits(fpc->regmap, FTM_SC, BIT(pwm->hwpwm + 16),
+				   BIT(pwm->hwpwm + 16));
+		mutex_unlock(&fpc->lock);
+	}
+
+	return ret;
 }
 
 static void fsl_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
 
-	clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
+	if (fpc->soc->has_enable_bits) {
+		mutex_lock(&fpc->lock);
+		regmap_update_bits(fpc->regmap, FTM_SC, BIT(pwm->hwpwm + 16),
+				   0);
+		mutex_unlock(&fpc->lock);
+	}
+
+	clk_disable_unprepare(fpc->ipg_clk);
 }
 
 static int fsl_pwm_calculate_default_ps(struct fsl_pwm_chip *fpc,
@@ -363,7 +387,7 @@ static int fsl_pwm_init(struct fsl_pwm_chip *fpc)
 {
 	int ret;
 
-	ret = clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
+	ret = clk_prepare_enable(fpc->ipg_clk);
 	if (ret)
 		return ret;
 
@@ -371,7 +395,7 @@ static int fsl_pwm_init(struct fsl_pwm_chip *fpc)
 	regmap_write(fpc->regmap, FTM_OUTINIT, 0x00);
 	regmap_write(fpc->regmap, FTM_OUTMASK, 0xFF);
 
-	clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
+	clk_disable_unprepare(fpc->ipg_clk);
 
 	return 0;
 }
@@ -408,6 +432,7 @@ static int fsl_pwm_probe(struct platform_device *pdev)
 
 	mutex_init(&fpc->lock);
 
+	fpc->soc = of_device_get_match_data(&pdev->dev);
 	fpc->chip.dev = &pdev->dev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -441,6 +466,15 @@ static int fsl_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]))
 		return PTR_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]);
 
+	/*
+	 * ipg_clk is the interface clock for the IP. If not provided, use the
+	 * ftm_sys clock as the default.
+	 */
+	fpc->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(fpc->ipg_clk))
+		fpc->ipg_clk = fpc->clk[FSL_PWM_CLK_SYS];
+
+
 	fpc->chip.ops = &fsl_pwm_ops;
 	fpc->chip.of_xlate = of_pwm_xlate_with_flags;
 	fpc->chip.of_pwm_n_cells = 3;
@@ -480,7 +514,7 @@ static int fsl_pwm_suspend(struct device *dev)
 		if (!test_bit(PWMF_REQUESTED, &pwm->flags))
 			continue;
 
-		clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
+		clk_disable_unprepare(fpc->ipg_clk);
 
 		if (!pwm_is_enabled(pwm))
 			continue;
@@ -503,7 +537,7 @@ static int fsl_pwm_resume(struct device *dev)
 		if (!test_bit(PWMF_REQUESTED, &pwm->flags))
 			continue;
 
-		clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
+		clk_prepare_enable(fpc->ipg_clk);
 
 		if (!pwm_is_enabled(pwm))
 			continue;
@@ -524,8 +558,17 @@ static const struct dev_pm_ops fsl_pwm_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(fsl_pwm_suspend, fsl_pwm_resume)
 };
 
+static const struct fsl_ftm_soc vf610_ftm_pwm = {
+	.has_enable_bits = false,
+};
+
+static const struct fsl_ftm_soc imx8qm_ftm_pwm = {
+	.has_enable_bits = true,
+};
+
 static const struct of_device_id fsl_pwm_dt_ids[] = {
-	{ .compatible = "fsl,vf610-ftm-pwm", },
+	{ .compatible = "fsl,vf610-ftm-pwm", .data = &vf610_ftm_pwm },
+	{ .compatible = "fsl,imx8qm-ftm-pwm", .data = &imx8qm_ftm_pwm },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fsl_pwm_dt_ids);

drivers/pwm/pwm-imx.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * simple driver for PWM (Pulse Width Modulator) controller
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
  */
 

drivers/pwm/pwm-mediatek.c

@@ -57,6 +57,7 @@ static const char * const mtk_pwm_clk_name[MTK_CLK_MAX] = {
 struct mtk_pwm_platform_data {
 	unsigned int num_pwms;
 	bool pwm45_fixup;
+	bool has_clks;
 };
 
 /**
@@ -86,6 +87,9 @@ static int mtk_pwm_clk_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
 	int ret;
 
+	if (!pc->soc->has_clks)
+		return 0;
+
 	ret = clk_prepare_enable(pc->clks[MTK_CLK_TOP]);
 	if (ret < 0)
 		return ret;
@@ -112,6 +116,9 @@ static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
 
+	if (!pc->soc->has_clks)
+		return;
+
 	clk_disable_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
 	clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]);
 	clk_disable_unprepare(pc->clks[MTK_CLK_TOP]);
@@ -239,7 +246,7 @@ static int mtk_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->regs))
 		return PTR_ERR(pc->regs);
 
-	for (i = 0; i < data->num_pwms + 2; i++) {
+	for (i = 0; i < data->num_pwms + 2 && pc->soc->has_clks; i++) {
 		pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
 		if (IS_ERR(pc->clks[i])) {
 			dev_err(&pdev->dev, "clock: %s fail: %ld\n",
@@ -274,22 +281,32 @@ static int mtk_pwm_remove(struct platform_device *pdev)
 static const struct mtk_pwm_platform_data mt2712_pwm_data = {
 	.num_pwms = 8,
 	.pwm45_fixup = false,
+	.has_clks = true,
 };
 
 static const struct mtk_pwm_platform_data mt7622_pwm_data = {
 	.num_pwms = 6,
 	.pwm45_fixup = false,
+	.has_clks = true,
 };
 
 static const struct mtk_pwm_platform_data mt7623_pwm_data = {
 	.num_pwms = 5,
 	.pwm45_fixup = true,
+	.has_clks = true,
+};
+
+static const struct mtk_pwm_platform_data mt7628_pwm_data = {
+	.num_pwms = 4,
+	.pwm45_fixup = true,
+	.has_clks = false,
 };
 
 static const struct of_device_id mtk_pwm_of_match[] = {
 	{ .compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data },
 	{ .compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data },
 	{ .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
+	{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);

drivers/pwm/pwm-meson.c

@@ -458,7 +458,6 @@ static int meson_pwm_init_channels(struct meson_pwm *meson,
 				   struct meson_pwm_channel *channels)
 {
 	struct device *dev = meson->chip.dev;
-	struct device_node *np = dev->of_node;
 	struct clk_init_data init;
 	unsigned int i;
 	char name[255];
@@ -467,7 +466,7 @@ static int meson_pwm_init_channels(struct meson_pwm *meson,
 	for (i = 0; i < meson->chip.npwm; i++) {
 		struct meson_pwm_channel *channel = &channels[i];
 
-		snprintf(name, sizeof(name), "%pOF#mux%u", np, i);
+		snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
 
 		init.name = name;
 		init.ops = &clk_mux_ops;

drivers/pwm/pwm-mxs.c

+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <linux/clk.h>

drivers/pwm/pwm-omap-dmtimer.c

@@ -264,8 +264,9 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 
 	timer_pdata = dev_get_platdata(&timer_pdev->dev);
 	if (!timer_pdata) {
-		dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
-		ret = -EINVAL;
+		dev_dbg(&pdev->dev,
+			 "dmtimer pdata structure NULL, deferring probe\n");
+		ret = -EPROBE_DEFER;
 		goto put;
 	}
 

drivers/pwm/pwm-stm32-lp.c

@@ -217,10 +217,8 @@ static int stm32_pwm_lp_probe(struct platform_device *pdev)
 static int stm32_pwm_lp_remove(struct platform_device *pdev)
 {
 	struct stm32_pwm_lp *priv = platform_get_drvdata(pdev);
-	unsigned int i;
 
-	for (i = 0; i < priv->chip.npwm; i++)
-		pwm_disable(&priv->chip.pwms[i]);
+	pwm_disable(&priv->chip.pwms[0]);
 
 	return pwmchip_remove(&priv->chip);
 }

drivers/pwm/pwm-tiehrpwm.c

@@ -33,10 +33,6 @@
 #define TBCTL			0x00
 #define TBPRD			0x0A
 
-#define TBCTL_RUN_MASK		(BIT(15) | BIT(14))
-#define TBCTL_STOP_NEXT		0
-#define TBCTL_STOP_ON_CYCLE	BIT(14)
-#define TBCTL_FREE_RUN		(BIT(15) | BIT(14))
 #define TBCTL_PRDLD_MASK	BIT(3)
 #define TBCTL_PRDLD_SHDW	0
 #define TBCTL_PRDLD_IMDT	BIT(3)
@@ -360,7 +356,7 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	/* Channels polarity can be configured from action qualifier module */
 	configure_polarity(pc, pwm->hwpwm);
 
-	/* Enable TBCLK before enabling PWM device */
+	/* Enable TBCLK */
 	ret = clk_enable(pc->tbclk);
 	if (ret) {
 		dev_err(chip->dev, "Failed to enable TBCLK for %s: %d\n",
@@ -368,9 +364,6 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 		return ret;
 	}
 
-	/* Enable time counter for free_run */
-	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
-
 	return 0;
 }
 
@@ -388,6 +381,8 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 		aqcsfrc_mask = AQCSFRC_CSFA_MASK;
 	}
 
+	/* Update shadow register first before modifying active register */
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
 	/*
 	 * Changes to immediate action on Action Qualifier. This puts
 	 * Action Qualifier control on PWM output from next TBCLK
@@ -400,9 +395,6 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	/* Disabling TBCLK on PWM disable */
 	clk_disable(pc->tbclk);
 
-	/* Stop Time base counter */
-	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
-
 	/* Disable clock on PWM disable */
 	pm_runtime_put_sync(chip->dev);
 }