Skip to content

L
linux
Commit b3fe2c66 authored by Tony Lindgren's avatar Tony Lindgren Committed by Russell King
Browse files
Options

[ARM PATCH] 1908/1: Remove old OMAP header files 

Patch from Tony Lindgren

This patch removes the following old files that have been renamed:
   include/asm-arm/arch-omap/omap-h2.h
   include/asm-arm/arch-omap/omap-innovator.h
   include/asm-arm/arch-omap/omap-perseus2.h

The new names for the files are board-*.h.
parent 86b0182d
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 401 deletions
include/asm-arm/arch-omap/omap-h2.h deleted 100644 → 0
View file @ 86b0182d
/*
* linux/include/asm-arm/arch-omap/omap-h2.h
*
* Hardware definitions for TI OMAP1610 H2 board.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_OMAP_H2_H
#define __ASM_ARCH_OMAP_H2_H
/* Placeholder for H2 specific defines */
#endif /* __ASM_ARCH_OMAP_H2_H */
include/asm-arm/arch-omap/omap-innovator.h deleted 100644 → 0
View file @ 86b0182d
/*
* linux/include/asm-arm/arch-omap/omap-innovator.h
*
* Copyright (C) 2001 RidgeRun, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
#define __ASM_ARCH_OMAP_INNOVATOR_H
#if defined (CONFIG_ARCH_OMAP1510)
/*
* ---------------------------------------------------------------------------
* OMAP-1510 FPGA
* ---------------------------------------------------------------------------
*/
#define OMAP1510P1_FPGA_BASE 0xE8000000 /* Virtual */
#define OMAP1510P1_FPGA_SIZE SZ_4K
#define OMAP1510P1_FPGA_START 0x08000000 /* Physical */
/* Revision */
#define OMAP1510P1_FPGA_REV_LOW (OMAP1510P1_FPGA_BASE + 0x0)
#define OMAP1510P1_FPGA_REV_HIGH (OMAP1510P1_FPGA_BASE + 0x1)
#define OMAP1510P1_FPGA_LCD_PANEL_CONTROL (OMAP1510P1_FPGA_BASE + 0x2)
#define OMAP1510P1_FPGA_LED_DIGIT (OMAP1510P1_FPGA_BASE + 0x3)
#define INNOVATOR_FPGA_HID_SPI (OMAP1510P1_FPGA_BASE + 0x4)
#define OMAP1510P1_FPGA_POWER (OMAP1510P1_FPGA_BASE + 0x5)
/* Interrupt status */
#define OMAP1510P1_FPGA_ISR_LO (OMAP1510P1_FPGA_BASE + 0x6)
#define OMAP1510P1_FPGA_ISR_HI (OMAP1510P1_FPGA_BASE + 0x7)
/* Interrupt mask */
#define OMAP1510P1_FPGA_IMR_LO (OMAP1510P1_FPGA_BASE + 0x8)
#define OMAP1510P1_FPGA_IMR_HI (OMAP1510P1_FPGA_BASE + 0x9)
/* Reset registers */
#define OMAP1510P1_FPGA_HOST_RESET (OMAP1510P1_FPGA_BASE + 0xa)
#define OMAP1510P1_FPGA_RST (OMAP1510P1_FPGA_BASE + 0xb)
#define OMAP1510P1_FPGA_AUDIO (OMAP1510P1_FPGA_BASE + 0xc)
#define OMAP1510P1_FPGA_DIP (OMAP1510P1_FPGA_BASE + 0xe)
#define OMAP1510P1_FPGA_FPGA_IO (OMAP1510P1_FPGA_BASE + 0xf)
#define OMAP1510P1_FPGA_UART1 (OMAP1510P1_FPGA_BASE + 0x14)
#define OMAP1510P1_FPGA_UART2 (OMAP1510P1_FPGA_BASE + 0x15)
#define OMAP1510P1_FPGA_OMAP1510_STATUS (OMAP1510P1_FPGA_BASE + 0x16)
#define OMAP1510P1_FPGA_BOARD_REV (OMAP1510P1_FPGA_BASE + 0x18)
#define OMAP1510P1_PPT_DATA (OMAP1510P1_FPGA_BASE + 0x100)
#define OMAP1510P1_PPT_STATUS (OMAP1510P1_FPGA_BASE + 0x101)
#define OMAP1510P1_PPT_CONTROL (OMAP1510P1_FPGA_BASE + 0x102)
#define OMAP1510P1_FPGA_TOUCHSCREEN (OMAP1510P1_FPGA_BASE + 0x204)
#define INNOVATOR_FPGA_INFO (OMAP1510P1_FPGA_BASE + 0x205)
#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510P1_FPGA_BASE + 0x206)
#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510P1_FPGA_BASE + 0x207)
#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510P1_FPGA_BASE + 0x208)
#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510P1_FPGA_BASE + 0x209)
#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510P1_FPGA_BASE + 0x20a)
#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510P1_FPGA_BASE + 0x20b)
#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510P1_FPGA_BASE + 0x20c)
#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510P1_FPGA_BASE + 0x20d)
#define INNOVATOR_FPGA_ISR2 (OMAP1510P1_FPGA_BASE + 0x20e)
#define INNOVATOR_FPGA_IMR2 (OMAP1510P1_FPGA_BASE + 0x210)
#define OMAP1510P1_FPGA_ETHR_START (OMAP1510P1_FPGA_START + 0x300)
#define OMAP1510P1_FPGA_ETHR_BASE (OMAP1510P1_FPGA_BASE + 0x300)
/*
* Power up Giga UART driver, turn on HID clock.
* Turn off BT power, since we're not using it and it
* draws power.
*/
#define OMAP1510P1_FPGA_RESET_VALUE 0x42
#define OMAP1510P1_FPGA_PCR_IF_PD0 (1 << 7)
#define OMAP1510P1_FPGA_PCR_COM2_EN (1 << 6)
#define OMAP1510P1_FPGA_PCR_COM1_EN (1 << 5)
#define OMAP1510P1_FPGA_PCR_EXP_PD0 (1 << 4)
#define OMAP1510P1_FPGA_PCR_EXP_PD1 (1 << 3)
#define OMAP1510P1_FPGA_PCR_48MHZ_CLK (1 << 2)
#define OMAP1510P1_FPGA_PCR_4MHZ_CLK (1 << 1)
#define OMAP1510P1_FPGA_PCR_RSRVD_BIT0 (1 << 0)
/*
* Innovator/OMAP1510 FPGA HID register bit definitions
*/
#define FPGA_HID_SCLK (1<<0) /* output */
#define FPGA_HID_MOSI (1<<1) /* output */
#define FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
#define FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
#define FPGA_HID_MISO (1<<4) /* input */
#define FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
#define FPGA_HID_rsrvd (1<<6)
#define FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
#ifndef OMAP_SDRAM_DEVICE
#define OMAP_SDRAM_DEVICE D256M_1X16_4B
#endif
#define OMAP1510P1_IMIF_PRI_VALUE 0x00
#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
/*
* These definitions define an area of FLASH set aside
* for the use of MTD/JFFS2. This is the area of flash
* that a JFFS2 filesystem will reside which is mounted
* at boot with the "root=/dev/mtdblock/0 rw"
* command line option. The flash address used here must
* fall within the legal range defined by rrload for storing
* the filesystem component. This address will be sufficiently
* deep into the overall flash range to avoid the other
* components also stored in flash such as the bootloader,
* the bootloader params, and the kernel.
* The SW2 settings for the map below are:
* 1 off, 2 off, 3 on, 4 off.
*/
/* Intel flash_0, partitioned as expected by rrload */
#define OMAP_FLASH_0_BASE 0xD8000000
#define OMAP_FLASH_0_START 0x00000000
#define OMAP_FLASH_0_SIZE SZ_16M
/* Intel flash_1, used for cramfs or other flash file systems */
#define OMAP_FLASH_1_BASE 0xD9000000
#define OMAP_FLASH_1_START 0x01000000
#define OMAP_FLASH_1_SIZE SZ_16M
/* The FPGA IRQ is cascaded through GPIO_13 */
#define INT_FPGA (IH_GPIO_BASE + 13)
/* IRQ Numbers for interrupts muxed through the FPGA */
#define IH_FPGA_BASE IH_BOARD_BASE
#define INT_FPGA_ATN (IH_FPGA_BASE + 0)
#define INT_FPGA_ACK (IH_FPGA_BASE + 1)
#define INT_FPGA2 (IH_FPGA_BASE + 2)
#define INT_FPGA3 (IH_FPGA_BASE + 3)
#define INT_FPGA4 (IH_FPGA_BASE + 4)
#define INT_FPGA5 (IH_FPGA_BASE + 5)
#define INT_FPGA6 (IH_FPGA_BASE + 6)
#define INT_FPGA7 (IH_FPGA_BASE + 7)
#define INT_FPGA8 (IH_FPGA_BASE + 8)
#define INT_FPGA9 (IH_FPGA_BASE + 9)
#define INT_FPGA10 (IH_FPGA_BASE + 10)
#define INT_FPGA11 (IH_FPGA_BASE + 11)
#define INT_FPGA12 (IH_FPGA_BASE + 12)
#define INT_ETHER (IH_FPGA_BASE + 13)
#define INT_FPGAUART1 (IH_FPGA_BASE + 14)
#define INT_FPGAUART2 (IH_FPGA_BASE + 15)
#define INT_FPGA_TS (IH_FPGA_BASE + 16)
#define INT_FPGA17 (IH_FPGA_BASE + 17)
#define INT_FPGA_CAM (IH_FPGA_BASE + 18)
#define INT_FPGA_RTC_A (IH_FPGA_BASE + 19)
#define INT_FPGA_RTC_B (IH_FPGA_BASE + 20)
#define INT_FPGA_CD (IH_FPGA_BASE + 21)
#define INT_FPGA22 (IH_FPGA_BASE + 22)
#define INT_FPGA23 (IH_FPGA_BASE + 23)
#define NR_FPGA_IRQS 24
#define MAXIRQNUM (IH_FPGA_BASE + NR_FPGA_IRQS - 1)
#define MAXFIQNUM MAXIRQNUM
#define MAXSWINUM MAXIRQNUM
#define NR_IRQS 256
#ifndef __ASSEMBLY__
void fpga_write(unsigned char val, int reg);
unsigned char fpga_read(int reg);
#endif
#elif defined (CONFIG_ARCH_OMAP1610)
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_BASE 0xE8000000
#define OMAP1610_ETHR_SIZE SZ_4K
#define OMAP1610_ETHR_START 0x04000000
/* Intel STRATA NOR flash at CS3 */
#define OMAP1610_NOR_FLASH_BASE 0xD8000000
#define OMAP1610_NOR_FLASH_SIZE SZ_32M
#define OMAP1610_NOR_FLASH_START 0x0C000000
#define MAXIRQNUM (IH_BOARD_BASE)
#define MAXFIQNUM MAXIRQNUM
#define MAXSWINUM MAXIRQNUM
#define NR_IRQS (MAXIRQNUM + 1)
#else
#error "Only OMAP1510 and OMAP1610 Innovator supported!"
#endif
#endif
include/asm-arm/arch-omap/omap-perseus2.h deleted 100644 → 0
View file @ 86b0182d
/*
* linux/include/asm-arm/arch-omap/omap-perseus2.h
*
* Copyright 2003 by Texas Instruments Incorporated
* OMAP730 / P2-sample additions
* Author: Jean Pihet
*
* Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
* Author: RidgeRun, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_OMAP_P2SAMPLE_H
#define __ASM_ARCH_OMAP_P2SAMPLE_H
#if defined(CONFIG_ARCH_OMAP730) && defined (CONFIG_MACH_OMAP_PERSEUS2)
/*
* NOTE: ALL DEFINITIONS IN THIS FILE NEED TO BE PREFIXED BY IDENTIFIER
* P2SAMPLE_ since they are specific to the EVM and not the chip.
*/
/* ---------------------------------------------------------------------------
* OMAP730 Debug Board FPGA
* ---------------------------------------------------------------------------
*
*/
/* maps in the FPGA registers and the ETHR registers */
#define OMAP730_FPGA_BASE 0xE8000000 /* VA */
#define OMAP730_FPGA_SIZE SZ_4K /* SIZE */
#define OMAP730_FPGA_START 0x04000000 /* PA */
#define OMAP730_FPGA_ETHR_START OMAP730_FPGA_START
#define OMAP730_FPGA_ETHR_BASE OMAP730_FPGA_BASE
#define OMAP730_FPGA_FPGA_REV (OMAP730_FPGA_BASE + 0x10) /* FPGA Revision */
#define OMAP730_FPGA_BOARD_REV (OMAP730_FPGA_BASE + 0x12) /* Board Revision */
#define OMAP730_FPGA_GPIO (OMAP730_FPGA_BASE + 0x14) /* GPIO outputs */
#define OMAP730_FPGA_LEDS (OMAP730_FPGA_BASE + 0x16) /* LEDs outputs */
#define OMAP730_FPGA_MISC_INPUTS (OMAP730_FPGA_BASE + 0x18) /* Misc inputs */
#define OMAP730_FPGA_LAN_STATUS (OMAP730_FPGA_BASE + 0x1A) /* LAN Status line */
#define OMAP730_FPGA_LAN_RESET (OMAP730_FPGA_BASE + 0x1C) /* LAN Reset line */
// LEDs definition on debug board (16 LEDs)
#define OMAP730_FPGA_LED_CLAIMRELEASE (1 << 15)
#define OMAP730_FPGA_LED_STARTSTOP (1 << 14)
#define OMAP730_FPGA_LED_HALTED (1 << 13)
#define OMAP730_FPGA_LED_IDLE (1 << 12)
#define OMAP730_FPGA_LED_TIMER (1 << 11)
// cpu0 load-meter LEDs
#define OMAP730_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
#define OMAP730_FPGA_LOAD_METER_SIZE 11
#define OMAP730_FPGA_LOAD_METER_MASK ((1 << OMAP730_FPGA_LOAD_METER_SIZE) - 1)
#ifndef OMAP_SDRAM_DEVICE
#define OMAP_SDRAM_DEVICE D256M_1X16_4B
#endif
/*
* These definitions define an area of FLASH set aside
* for the use of MTD/JFFS2. This is the area of flash
* that a JFFS2 filesystem will reside which is mounted
* at boot with the "root=/dev/mtdblock/0 rw"
* command line option.
*/
/* Intel flash_0, partitioned as expected by rrload */
#define OMAP_FLASH_0_BASE 0xD8000000 /* VA */
#define OMAP_FLASH_0_START 0x00000000 /* PA */
#define OMAP_FLASH_0_SIZE SZ_32M
/* 2.9.6 Traffic Controller Memory Interface Registers */
#define OMAP_FLASH_CFG_0 0xfffecc10
#define OMAP_FLASH_ACFG_0 0xfffecc50
#define OMAP_FLASH_CFG_1 0xfffecc14
#define OMAP_FLASH_ACFG_1 0xfffecc54
/*
* Configuration Registers
*/
#define PERSEUS2_CONFIG_BASE 0xfffe1000
#define PERSEUS2_IO_CONF_0 0xfffe1070
#define PERSEUS2_IO_CONF_1 0xfffe1074
#define PERSEUS2_IO_CONF_2 0xfffe1078
#define PERSEUS2_IO_CONF_3 0xfffe107c
#define PERSEUS2_IO_CONF_4 0xfffe1080
#define PERSEUS2_IO_CONF_5 0xfffe1084
#define PERSEUS2_IO_CONF_6 0xfffe1088
#define PERSEUS2_IO_CONF_7 0xfffe108c
#define PERSEUS2_IO_CONF_8 0xfffe1090
#define PERSEUS2_IO_CONF_9 0xfffe1094
#define PERSEUS2_IO_CONF_10 0xfffe1098
#define PERSEUS2_IO_CONF_11 0xfffe109c
#define PERSEUS2_IO_CONF_12 0xfffe10a0
#define PERSEUS2_IO_CONF_13 0xfffe10a4
#define PERSEUS2_MODE_1 0xfffe1010
#define PERSEUS2_MODE_2 0xfffe1014
/* CSMI specials: in terms of base + offset */
#define PERSEUS2_MODE2_OFFSET 0x14
/* DSP control: ICR registers */
#define ICR_BASE 0xfffbb800
/* M_CTL */
#define DSP_M_CTL ((volatile __u16 *)0xfffbb804)
/* DSP control: MMU registers */
#define DSP_MMU_BASE ((volatile __u16 *)0xfffed200)
/* The Ethernet Controller IRQ is cascaded to MPU_EXT_nIRQ througb the FPGA */
#define INT_ETHER INT_730_MPU_EXT_NIRQ
#define MAXIRQNUM IH_BOARD_BASE
#define MAXFIQNUM MAXIRQNUM
#define MAXSWINUM MAXIRQNUM
#define NR_IRQS (MAXIRQNUM + 1)
#ifndef __ASSEMBLY__
void fpga_write(unsigned char val, int reg);
unsigned char fpga_read(int reg);
#endif
/* PCC_UPLD control register: OMAP730 */
#define PCC_UPLD_CTRL_REG_BASE (0xfffe0900)
#define PCC_UPLD_CTRL_REG (volatile __u16 *)(PCC_UPLD_CTRL_REG_BASE + 0x00)
#else
#error "Only OMAP730 Perseus2 supported!"
#endif
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7