Commit b5529ef5 authored by Don Skidmore's avatar Don Skidmore Committed by Jeff Kirsher

ixgbe: Assign set_phy_power dynamically where needed

There are various reasons why this method may or may not need to be
defined and some of these we don't know until runtime.  So we will
set the value in get_invariants.
Signed-off-by: default avatarDonald C Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent bd8069ac
......@@ -54,6 +54,11 @@ enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
/* set_phy_power was set by default to NULL */
if (!ixgbe_mng_present(hw))
phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
......
......@@ -26,6 +26,20 @@
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
/* Start with X540 invariants, since so simular */
ixgbe_get_invariants_X540(hw);
if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
phy->ops.set_phy_power = NULL;
return 0;
}
/** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
* @hw: pointer to hardware structure
**/
......@@ -1855,7 +1869,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
.read_reg = &ixgbe_read_phy_reg_generic, \
.write_reg = &ixgbe_write_phy_reg_generic, \
.setup_link = &ixgbe_setup_phy_link_generic, \
.set_phy_power = &ixgbe_set_copper_phy_power, \
.set_phy_power = NULL, \
.check_overtemp = &ixgbe_tn_check_overtemp, \
.get_firmware_version = &ixgbe_get_phy_firmware_version_generic,
......@@ -1893,7 +1907,7 @@ struct ixgbe_info ixgbe_X550_info = {
struct ixgbe_info ixgbe_X550EM_x_info = {
.mac = ixgbe_mac_X550EM_x,
.get_invariants = &ixgbe_get_invariants_X540,
.get_invariants = &ixgbe_get_invariants_X550_x,
.mac_ops = &mac_ops_X550EM_x,
.eeprom_ops = &eeprom_ops_X550EM_x,
.phy_ops = &phy_ops_X550EM_x,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment