Commit b84bb518 authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (w83627ehf) Permit enabling SmartFan IV mode if configured at startup

If SmartFan IV mode was configured at startup, it should be possible
to re-enable it later on.
Signed-off-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: default avatarIan Dobson <i.dobson@planet-ian.com>
parent 279af1a9
...@@ -346,7 +346,10 @@ struct w83627ehf_data { ...@@ -346,7 +346,10 @@ struct w83627ehf_data {
2->thermal cruise mode (also called SmartFan I) 2->thermal cruise mode (also called SmartFan I)
3->fan speed cruise mode 3->fan speed cruise mode
4->variable thermal cruise (also called 4->variable thermal cruise (also called
SmartFan III) */ SmartFan III)
5->enhanced variable thermal cruise (also called
SmartFan IV) */
u8 pwm_enable_orig[4]; /* original value of pwm_enable */
u8 pwm_num; /* number of pwm */ u8 pwm_num; /* number of pwm */
u8 pwm[4]; u8 pwm[4];
u8 target_temp[4]; u8 target_temp[4];
...@@ -1055,7 +1058,7 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr, ...@@ -1055,7 +1058,7 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
if (err < 0) if (err < 0)
return err; return err;
if (!val || (val > 4)) if (!val || (val > 4 && val != data->pwm_enable_orig[nr]))
return -EINVAL; return -EINVAL;
mutex_lock(&data->update_lock); mutex_lock(&data->update_lock);
reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]); reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
...@@ -1617,6 +1620,11 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) ...@@ -1617,6 +1620,11 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
/* Read fan clock dividers immediately */ /* Read fan clock dividers immediately */
w83627ehf_update_fan_div(data); w83627ehf_update_fan_div(data);
/* Read pwm data to save original values */
w83627ehf_update_pwm_common(dev, data);
for (i = 0; i < data->pwm_num; i++)
data->pwm_enable_orig[i] = data->pwm_enable[i];
/* Register sysfs hooks */ /* Register sysfs hooks */
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) { for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) {
err = device_create_file(dev, &sda_sf3_arrays[i].dev_attr); err = device_create_file(dev, &sda_sf3_arrays[i].dev_attr);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment