Commit b908af55 authored by Wambui Karuga's avatar Wambui Karuga Committed by Jani Nikula

drm/i915/sideband: convert to using new struct drm_device logging macros

Replace the use of printk based debugging macros with the struct
drm_device based logging macros in i915/intel_sideband.c.
Signed-off-by: default avatarWambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ae253ecf3ca878fae7f1f246d75c2136fb6bd72c.1578409433.git.wambui.karugax@gmail.com
parent d5cf720f
......@@ -105,7 +105,7 @@ static int vlv_sideband_rw(struct drm_i915_private *i915,
if (intel_wait_for_register(uncore,
VLV_IOSF_DOORBELL_REQ, IOSF_SB_BUSY, 0,
5)) {
DRM_DEBUG_DRIVER("IOSF sideband idle wait (%s) timed out\n",
drm_dbg(&i915->drm, "IOSF sideband idle wait (%s) timed out\n",
is_read ? "read" : "write");
return -EAGAIN;
}
......@@ -129,7 +129,7 @@ static int vlv_sideband_rw(struct drm_i915_private *i915,
*val = intel_uncore_read_fw(uncore, VLV_IOSF_DATA);
err = 0;
} else {
DRM_DEBUG_DRIVER("IOSF sideband finish wait (%s) timed out\n",
drm_dbg(&i915->drm, "IOSF sideband finish wait (%s) timed out\n",
is_read ? "read" : "write");
err = -ETIMEDOUT;
}
......@@ -283,7 +283,8 @@ static int intel_sbi_rw(struct drm_i915_private *i915, u16 reg,
if (intel_wait_for_register_fw(uncore,
SBI_CTL_STAT, SBI_BUSY, 0,
100)) {
DRM_ERROR("timeout waiting for SBI to become ready\n");
drm_err(&i915->drm,
"timeout waiting for SBI to become ready\n");
return -EBUSY;
}
......@@ -301,12 +302,13 @@ static int intel_sbi_rw(struct drm_i915_private *i915, u16 reg,
if (__intel_wait_for_register_fw(uncore,
SBI_CTL_STAT, SBI_BUSY, 0,
100, 100, &cmd)) {
DRM_ERROR("timeout waiting for SBI to complete read\n");
drm_err(&i915->drm,
"timeout waiting for SBI to complete read\n");
return -ETIMEDOUT;
}
if (cmd & SBI_RESPONSE_FAIL) {
DRM_ERROR("error during SBI read of reg %x\n", reg);
drm_err(&i915->drm, "error during SBI read of reg %x\n", reg);
return -ENXIO;
}
......@@ -426,7 +428,8 @@ int sandybridge_pcode_read(struct drm_i915_private *i915, u32 mbox,
mutex_unlock(&i915->sb_lock);
if (err) {
DRM_DEBUG_DRIVER("warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
drm_dbg(&i915->drm,
"warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
mbox, __builtin_return_address(0), err);
}
......@@ -447,7 +450,8 @@ int sandybridge_pcode_write_timeout(struct drm_i915_private *i915,
mutex_unlock(&i915->sb_lock);
if (err) {
DRM_DEBUG_DRIVER("warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
drm_dbg(&i915->drm,
"warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
val, mbox, __builtin_return_address(0), err);
}
......@@ -519,7 +523,8 @@ int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
* requests, and for any quirks of the PCODE firmware that delays
* the request completion.
*/
DRM_DEBUG_KMS("PCODE timeout, retrying with preemption disabled\n");
drm_dbg_kms(&i915->drm,
"PCODE timeout, retrying with preemption disabled\n");
WARN_ON_ONCE(timeout_base_ms > 3);
preempt_disable();
ret = wait_for_atomic(COND, 50);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment