Commit bac56d5b authored by Egbert Eich's avatar Egbert Eich Committed by Daniel Vetter

DRM/i915: Remove i965_hpd_irq_setup.

After
"Convert HPD interrupts to make use of HPD pin assignment in encoders."
This function is now basically the same as i915_hpd_irq_setup().

Consolidating both functions in one requires one more check for
I915_HAS_HOTPLUG(dev) in the i965 code path and one more check for
IS_G4X(dev) in the i915 code path. These are considered harmless.
Signed-off-by: default avatarEgbert Eich <eich@suse.de>
Acked-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
[danvet: Fixup patch conflict and make it compile.]
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 82a28bcf
......@@ -2526,25 +2526,6 @@ static int i915_irq_postinstall(struct drm_device *dev)
return 0;
}
static void i915_hpd_irq_setup(struct drm_device *dev)
{
if (I915_HAS_HOTPLUG(dev)) {
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
hotplug_en &= ~HOTPLUG_INT_EN_MASK;
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
}
/*
* Returns true when a page flip has completed.
*/
......@@ -2774,17 +2755,19 @@ static int i965_irq_postinstall(struct drm_device *dev)
return 0;
}
static void i965_hpd_irq_setup(struct drm_device *dev)
static void i915_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
u32 hotplug_en;
if (I915_HAS_HOTPLUG(dev)) {
hotplug_en = I915_READ(PORT_HOTPLUG_EN);
hotplug_en &= ~HOTPLUG_INT_EN_MASK;
/* Note HDMI and DP share hotplug bits */
hotplug_en = 0;
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
/* enable bits are the same for all generations */
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
/* Programming the CRT detection parameters tends
to generate a spurious hotplug event about three
......@@ -2795,8 +2778,8 @@ static void i965_hpd_irq_setup(struct drm_device *dev)
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
}
static irqreturn_t i965_irq_handler(int irq, void *arg)
......@@ -3008,7 +2991,7 @@ void intel_irq_init(struct drm_device *dev)
dev->driver->irq_postinstall = i965_irq_postinstall;
dev->driver->irq_uninstall = i965_irq_uninstall;
dev->driver->irq_handler = i965_irq_handler;
dev_priv->display.hpd_irq_setup = i965_hpd_irq_setup;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
}
dev->driver->enable_vblank = i915_enable_vblank;
dev->driver->disable_vblank = i915_disable_vblank;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment