Commit bae14e7a authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'mfd-for-linus-3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull more MFD updates from Lee Jones:
 "I missed collecting these patches due to a branch/tag naming
  ambiguity.  Completely my own fault, as I mindlessly named a branch
  and tag identically.  Sorry for the fuss.

  This pull-request contains some misplaced patches from Tony Lindgren
  that should have been part of the initial one"

* tag 'mfd-for-linus-3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle
  mfd: twl4030-power: Add support for board specific configuration
  mfd: twl4030-power: Add recommended idle configuration
  mfd: twl4030-power: Add generic reset configuration
  mfd: twl4030-power: Fix some defines for SW_EVENTS
  mfd: twl4030-power: Fix hang on reboot if sleep configuration was loaded earlier
parents 171c0621 43fef47f
......@@ -5,7 +5,22 @@ to control the power resources, including power scripts. For now, the
binding only supports the complete shutdown of the system after poweroff.
Required properties:
- compatible : must be "ti,twl4030-power"
- compatible : must be one of the following
"ti,twl4030-power"
"ti,twl4030-power-reset"
"ti,twl4030-power-idle"
"ti,twl4030-power-idle-osc-off"
The use of ti,twl4030-power-reset is recommended at least on
3530 that needs a special configuration for warm reset to work.
When using ti,twl4030-power-idle, the TI recommended configuration
for idle modes is loaded to the tlw4030 PMIC.
When using ti,twl4030-power-idle-osc-off, the TI recommended
configuration is used with the external oscillator being shut
down during off-idle. Note that this does not work on all boards
depending on how the external oscillator is wired.
Optional properties:
- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
......
......@@ -29,13 +29,21 @@
#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <asm/mach-types.h>
static u8 twl4030_start_script_address = 0x2b;
#define PWR_P1_SW_EVENTS 0x10
#define PWR_DEVOFF (1 << 0)
/* Register bits for P1, P2 and P3_SW_EVENTS */
#define PWR_STOPON_PRWON BIT(6)
#define PWR_STOPON_SYSEN BIT(5)
#define PWR_ENABLE_WARMRESET BIT(4)
#define PWR_LVL_WAKEUP BIT(3)
#define PWR_DEVACT BIT(2)
#define PWR_DEVSLP BIT(1)
#define PWR_DEVOFF BIT(0)
#define SEQ_OFFSYNC (1 << 0)
#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
......@@ -52,10 +60,6 @@ static u8 twl4030_start_script_address = 0x2b;
#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37)
#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38)
#define LVL_WAKEUP 0x08
#define ENABLE_WARMRESET (1<<4)
#define END_OF_SCRIPT 0x3f
#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55)
......@@ -125,6 +129,53 @@ static u8 res_config_addrs[] = {
[RES_MAIN_REF] = 0x94,
};
/*
* Usable values for .remap_sleep and .remap_off
* Based on table "5.3.3 Resource Operating modes"
*/
enum {
TWL_REMAP_OFF = 0,
TWL_REMAP_SLEEP = 8,
TWL_REMAP_ACTIVE = 9,
};
/*
* Macros to configure the PM register states for various resources.
* Note that we can make MSG_SINGULAR etc private to this driver once
* omap3 has been made DT only.
*/
#define TWL_DFLT_DELAY 2 /* typically 2 32 KiHz cycles */
#define TWL_DEV_GRP_P123 (DEV_GRP_P1 | DEV_GRP_P2 | DEV_GRP_P3)
#define TWL_RESOURCE_SET(res, state) \
{ MSG_SINGULAR(DEV_GRP_NULL, (res), (state)), TWL_DFLT_DELAY }
#define TWL_RESOURCE_ON(res) TWL_RESOURCE_SET(res, RES_STATE_ACTIVE)
#define TWL_RESOURCE_OFF(res) TWL_RESOURCE_SET(res, RES_STATE_OFF)
#define TWL_RESOURCE_RESET(res) TWL_RESOURCE_SET(res, RES_STATE_WRST)
/*
* It seems that type1 and type2 is just the resource init order
* number for the type1 and type2 group.
*/
#define TWL_RESOURCE_SET_ACTIVE(res, state) \
{ MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), (state) }
#define TWL_RESOURCE_GROUP_RESET(group, type1, type2) \
{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2), \
RES_STATE_WRST), TWL_DFLT_DELAY }
#define TWL_RESOURCE_GROUP_SLEEP(group, type, type2) \
{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \
RES_STATE_SLEEP), TWL_DFLT_DELAY }
#define TWL_RESOURCE_GROUP_ACTIVE(group, type, type2) \
{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \
RES_STATE_ACTIVE), TWL_DFLT_DELAY }
#define TWL_REMAP_SLEEP(res, devgrp, typ, typ2) \
{ .resource = (res), .devgroup = (devgrp), \
.type = (typ), .type2 = (typ2), \
.remap_off = TWL_REMAP_OFF, \
.remap_sleep = TWL_REMAP_SLEEP, }
#define TWL_REMAP_OFF(res, devgrp, typ, typ2) \
{ .resource = (res), .devgroup = (devgrp), \
.type = (typ), .type2 = (typ2), \
.remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_OFF, }
static int twl4030_write_script_byte(u8 address, u8 byte)
{
int err;
......@@ -196,7 +247,7 @@ static int twl4030_config_wakeup3_sequence(u8 address)
err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &data, R_P3_SW_EVENTS);
if (err)
goto out;
data |= LVL_WAKEUP;
data |= PWR_LVL_WAKEUP;
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P3_SW_EVENTS);
out:
if (err)
......@@ -219,7 +270,7 @@ static int twl4030_config_wakeup12_sequence(u8 address)
if (err)
goto out;
data |= LVL_WAKEUP;
data |= PWR_LVL_WAKEUP;
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P1_SW_EVENTS);
if (err)
goto out;
......@@ -228,7 +279,7 @@ static int twl4030_config_wakeup12_sequence(u8 address)
if (err)
goto out;
data |= LVL_WAKEUP;
data |= PWR_LVL_WAKEUP;
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, data, R_P2_SW_EVENTS);
if (err)
goto out;
......@@ -281,7 +332,7 @@ static int twl4030_config_warmreset_sequence(u8 address)
if (err)
goto out;
rd_data |= ENABLE_WARMRESET;
rd_data |= PWR_ENABLE_WARMRESET;
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P1_SW_EVENTS);
if (err)
goto out;
......@@ -290,7 +341,7 @@ static int twl4030_config_warmreset_sequence(u8 address)
if (err)
goto out;
rd_data |= ENABLE_WARMRESET;
rd_data |= PWR_ENABLE_WARMRESET;
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P2_SW_EVENTS);
if (err)
goto out;
......@@ -299,7 +350,7 @@ static int twl4030_config_warmreset_sequence(u8 address)
if (err)
goto out;
rd_data |= ENABLE_WARMRESET;
rd_data |= PWR_ENABLE_WARMRESET;
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, rd_data, R_P3_SW_EVENTS);
out:
if (err)
......@@ -421,6 +472,12 @@ static int load_twl4030_script(struct twl4030_script *tscript,
goto out;
}
if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) {
/* Reset any existing sleep script to avoid hangs on reboot */
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, END_OF_SCRIPT,
R_SEQ_ADD_A2S);
if (err)
goto out;
err = twl4030_config_wakeup12_sequence(address);
if (err)
goto out;
......@@ -493,7 +550,8 @@ int twl4030_remove_script(u8 flags)
return err;
}
static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata)
static int
twl4030_power_configure_scripts(const struct twl4030_power_data *pdata)
{
int err;
int i;
......@@ -509,12 +567,34 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata)
return 0;
}
static int twl4030_power_configure_resources(struct twl4030_power_data *pdata)
static void twl4030_patch_rconfig(struct twl4030_resconfig *common,
struct twl4030_resconfig *board)
{
while (common->resource) {
struct twl4030_resconfig *b = board;
while (b->resource) {
if (b->resource == common->resource) {
*common = *b;
break;
}
b++;
}
common++;
}
}
static int
twl4030_power_configure_resources(const struct twl4030_power_data *pdata)
{
struct twl4030_resconfig *resconfig = pdata->resource_config;
struct twl4030_resconfig *boardconf = pdata->board_config;
int err;
if (resconfig) {
if (boardconf)
twl4030_patch_rconfig(resconfig, boardconf);
while (resconfig->resource) {
err = twl4030_configure_resource(resconfig);
if (err)
......@@ -541,7 +621,7 @@ void twl4030_power_off(void)
pr_err("TWL4030 Unable to power off\n");
}
static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
struct device_node *node)
{
if (pdata && pdata->use_poweroff)
......@@ -553,10 +633,170 @@ static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
return false;
}
#ifdef CONFIG_OF
/* Generic warm reset configuration for omap3 */
static struct twl4030_ins omap3_wrst_seq[] = {
TWL_RESOURCE_OFF(RES_NRES_PWRON),
TWL_RESOURCE_OFF(RES_RESET),
TWL_RESOURCE_RESET(RES_MAIN_REF),
TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2),
TWL_RESOURCE_RESET(RES_VUSB_3V1),
TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1),
TWL_RESOURCE_GROUP_RESET(RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0),
TWL_RESOURCE_ON(RES_RESET),
TWL_RESOURCE_ON(RES_NRES_PWRON),
};
static struct twl4030_script omap3_wrst_script = {
.script = omap3_wrst_seq,
.size = ARRAY_SIZE(omap3_wrst_seq),
.flags = TWL4030_WRST_SCRIPT,
};
static struct twl4030_script *omap3_reset_scripts[] = {
&omap3_wrst_script,
};
static struct twl4030_resconfig omap3_rconfig[] = {
TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, -1, -1),
TWL_REMAP_SLEEP(RES_VDD1, DEV_GRP_P1, -1, -1),
TWL_REMAP_SLEEP(RES_VDD2, DEV_GRP_P1, -1, -1),
{ 0, 0 },
};
static struct twl4030_power_data omap3_reset = {
.scripts = omap3_reset_scripts,
.num = ARRAY_SIZE(omap3_reset_scripts),
.resource_config = omap3_rconfig,
};
/* Recommended generic default idle configuration for off-idle */
/* Broadcast message to put res to sleep */
static struct twl4030_ins omap3_idle_sleep_on_seq[] = {
TWL_RESOURCE_GROUP_SLEEP(RES_GRP_ALL, RES_TYPE_ALL, 0),
};
static struct twl4030_script omap3_idle_sleep_on_script = {
.script = omap3_idle_sleep_on_seq,
.size = ARRAY_SIZE(omap3_idle_sleep_on_seq),
.flags = TWL4030_SLEEP_SCRIPT,
};
/* Broadcast message to put res to active */
static struct twl4030_ins omap3_idle_wakeup_p12_seq[] = {
TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0),
};
static struct twl4030_script omap3_idle_wakeup_p12_script = {
.script = omap3_idle_wakeup_p12_seq,
.size = ARRAY_SIZE(omap3_idle_wakeup_p12_seq),
.flags = TWL4030_WAKEUP12_SCRIPT,
};
/* Broadcast message to put res to active */
static struct twl4030_ins omap3_idle_wakeup_p3_seq[] = {
TWL_RESOURCE_SET_ACTIVE(RES_CLKEN, 0x37),
TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0),
};
static struct twl4030_script omap3_idle_wakeup_p3_script = {
.script = omap3_idle_wakeup_p3_seq,
.size = ARRAY_SIZE(omap3_idle_wakeup_p3_seq),
.flags = TWL4030_WAKEUP3_SCRIPT,
};
static struct twl4030_script *omap3_idle_scripts[] = {
&omap3_idle_wakeup_p12_script,
&omap3_idle_wakeup_p3_script,
&omap3_wrst_script,
&omap3_idle_sleep_on_script,
};
/*
* Recommended configuration based on "Recommended Sleep
* Sequences for the Zoom Platform":
* http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf
* Note that the type1 and type2 seem to be just the init order number
* for type1 and type2 groups as specified in the document mentioned
* above.
*/
static struct twl4030_resconfig omap3_idle_rconfig[] = {
TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0),
TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1),
TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0),
TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2),
TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2),
TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2),
TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2),
TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1),
TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1),
TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0),
TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0),
/* Resource #20 USB charge pump skipped */
TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1),
TWL_REMAP_SLEEP(RES_NRES_PWRON, TWL_DEV_GRP_P123, 0, 1),
TWL_REMAP_SLEEP(RES_CLKEN, TWL_DEV_GRP_P123, 3, 2),
TWL_REMAP_SLEEP(RES_SYSEN, TWL_DEV_GRP_P123, 6, 1),
TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, 0, 2),
TWL_REMAP_SLEEP(RES_32KCLKOUT, TWL_DEV_GRP_P123, 0, 0),
TWL_REMAP_SLEEP(RES_RESET, TWL_DEV_GRP_P123, 6, 0),
TWL_REMAP_SLEEP(RES_MAIN_REF, TWL_DEV_GRP_P123, 0, 0),
{ /* Terminator */ },
};
static struct twl4030_power_data omap3_idle = {
.scripts = omap3_idle_scripts,
.num = ARRAY_SIZE(omap3_idle_scripts),
.resource_config = omap3_idle_rconfig,
};
/* Disable 32 KiHz oscillator during idle */
static struct twl4030_resconfig osc_off_rconfig[] = {
TWL_REMAP_OFF(RES_CLKEN, DEV_GRP_P1 | DEV_GRP_P3, 3, 2),
{ /* Terminator */ },
};
static struct twl4030_power_data osc_off_idle = {
.scripts = omap3_idle_scripts,
.num = ARRAY_SIZE(omap3_idle_scripts),
.resource_config = omap3_idle_rconfig,
.board_config = osc_off_rconfig,
};
static struct of_device_id twl4030_power_of_match[] = {
{
.compatible = "ti,twl4030-power-reset",
.data = &omap3_reset,
},
{
.compatible = "ti,twl4030-power-idle",
.data = &omap3_idle,
},
{
.compatible = "ti,twl4030-power-idle-osc-off",
.data = &osc_off_idle,
},
{ },
};
MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
#endif /* CONFIG_OF */
static int twl4030_power_probe(struct platform_device *pdev)
{
struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *match;
int err = 0;
int err2 = 0;
u8 val;
......@@ -577,8 +817,12 @@ static int twl4030_power_probe(struct platform_device *pdev)
return err;
}
match = of_match_device(of_match_ptr(twl4030_power_of_match),
&pdev->dev);
if (match && match->data)
pdata = match->data;
if (pdata) {
/* TODO: convert to device tree */
err = twl4030_power_configure_scripts(pdata);
if (err) {
pr_err("TWL4030 failed to load scripts\n");
......@@ -628,14 +872,6 @@ static int twl4030_power_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id twl4030_power_of_match[] = {
{.compatible = "ti,twl4030-power", },
{ },
};
MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
#endif
static struct platform_driver twl4030_power_driver = {
.driver = {
.name = "twl4030_power",
......
......@@ -498,7 +498,10 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
#define RES_GRP_ALL 0x7 /* All resource groups */
#define RES_TYPE2_R0 0x0
#define RES_TYPE2_R1 0x1
#define RES_TYPE2_R2 0x2
#define RES_TYPE_R0 0x0
#define RES_TYPE_ALL 0x7
/* Resource states */
......@@ -671,6 +674,7 @@ struct twl4030_power_data {
struct twl4030_script **scripts;
unsigned num;
struct twl4030_resconfig *resource_config;
struct twl4030_resconfig *board_config;
#define TWL4030_RESCONFIG_UNDEF ((u8)-1)
bool use_poweroff; /* Board is wired for TWL poweroff */
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment