Merge branch 'for-rmk' of...

Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable

arch/arm/Kconfig

@@ -766,6 +766,7 @@ config ARCH_S5PV310
 	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_I2C if I2C

arch/arm/mach-s3c2410/bast-irq.c

@@ -75,38 +75,38 @@ static unsigned char bast_pc104_irqmasks[] = {
 static unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
 
 static void
-bast_pc104_mask(unsigned int irqno)
+bast_pc104_mask(struct irq_data *data)
 {
 	unsigned long temp;
 
 	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
-	temp &= ~bast_pc104_irqmasks[irqno];
+	temp &= ~bast_pc104_irqmasks[data->irq];
 	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
 }
 
 static void
-bast_pc104_maskack(unsigned int irqno)
+bast_pc104_maskack(struct irq_data *data)
 {
 	struct irq_desc *desc = irq_desc + IRQ_ISA;
 
-	bast_pc104_mask(irqno);
-	desc->chip->ack(IRQ_ISA);
+	bast_pc104_mask(data);
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
 }
 
 static void
-bast_pc104_unmask(unsigned int irqno)
+bast_pc104_unmask(struct irq_data *data)
 {
 	unsigned long temp;
 
 	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
-	temp |= bast_pc104_irqmasks[irqno];
+	temp |= bast_pc104_irqmasks[data->irq];
 	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
 }
 
 static struct irq_chip  bast_pc104_chip = {
-	.mask	     = bast_pc104_mask,
-	.unmask	     = bast_pc104_unmask,
-	.ack	     = bast_pc104_maskack
+	.irq_mask	= bast_pc104_mask,
+	.irq_unmask	= bast_pc104_unmask,
+	.irq_ack	= bast_pc104_maskack
 };
 
 static void
@@ -123,7 +123,7 @@ bast_irq_pc104_demux(unsigned int irq,
 		/* ack if we get an irq with nothing (ie, startup) */
 
 		desc = irq_desc + IRQ_ISA;
-		desc->chip->ack(IRQ_ISA);
+		desc->irq_data.chip->irq_ack(&desc->irq_data);
 	} else {
 		/* handle the IRQ */
 

arch/arm/mach-s3c2410/include/mach/irqs.h

@@ -152,8 +152,8 @@
 
 #define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
 
-#define IRQ_HSMMC0		IRQ_S3C2443_HSMMC
-#define IRQ_HSMMC1		IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC0		IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC1		IRQ_S3C2443_HSMMC
 
 #define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)

arch/arm/mach-s3c2410/include/mach/map.h

@@ -112,8 +112,8 @@
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
-#define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
-#define S3C_PA_HSMMC1	    S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
 #define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 

arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h

@@ -86,6 +86,7 @@
 #define S3C2443_HCLKCON_LCDC		(1<<9)
 #define S3C2443_HCLKCON_USBH		(1<<11)
 #define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2416_HCLKCON_HSMMC0		(1<<15)
 #define S3C2443_HCLKCON_HSMMC		(1<<16)
 #define S3C2443_HCLKCON_CFC		(1<<17)
 #define S3C2443_HCLKCON_SSMC		(1<<18)

arch/arm/mach-s3c2412/irq.c

@@ -49,9 +49,9 @@
 */
 
 static void
-s3c2412_irq_mask(unsigned int irqno)
+s3c2412_irq_mask(struct irq_data *data)
 {
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
 	unsigned long mask;
 
 	mask = __raw_readl(S3C2410_INTMSK);
@@ -62,9 +62,9 @@ s3c2412_irq_mask(unsigned int irqno)
 }
 
 static inline void
-s3c2412_irq_ack(unsigned int irqno)
+s3c2412_irq_ack(struct irq_data *data)
 {
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
 
 	__raw_writel(bitval, S3C2412_EINTPEND);
 	__raw_writel(bitval, S3C2410_SRCPND);
@@ -72,9 +72,9 @@ s3c2412_irq_ack(unsigned int irqno)
 }
 
 static inline void
-s3c2412_irq_maskack(unsigned int irqno)
+s3c2412_irq_maskack(struct irq_data *data)
 {
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
 	unsigned long mask;
 
 	mask = __raw_readl(S3C2410_INTMSK);
@@ -89,9 +89,9 @@ s3c2412_irq_maskack(unsigned int irqno)
 }
 
 static void
-s3c2412_irq_unmask(unsigned int irqno)
+s3c2412_irq_unmask(struct irq_data *data)
 {
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
 	unsigned long mask;
 
 	mask = __raw_readl(S3C2412_EINTMASK);
@@ -102,11 +102,11 @@ s3c2412_irq_unmask(unsigned int irqno)
 }
 
 static struct irq_chip s3c2412_irq_eint0t4 = {
-	.ack	   = s3c2412_irq_ack,
-	.mask	   = s3c2412_irq_mask,
-	.unmask	   = s3c2412_irq_unmask,
-	.set_wake  = s3c_irq_wake,
-	.set_type  = s3c_irqext_type,
+	.irq_ack	= s3c2412_irq_ack,
+	.irq_mask	= s3c2412_irq_mask,
+	.irq_unmask	= s3c2412_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake,
+	.irq_set_type	= s3c_irqext_type,
 };
 
 #define INTBIT(x)	(1 << ((x) - S3C2410_IRQSUB(0)))
@@ -132,29 +132,29 @@ static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_CFSDI	(1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
 #define SUBMSK_CFSDI	INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
 
-static void s3c2412_irq_cfsdi_mask(unsigned int irqno)
+static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_CFSDI, SUBMSK_CFSDI);
+	s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
 }
 
-static void s3c2412_irq_cfsdi_unmask(unsigned int irqno)
+static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_CFSDI);
+	s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
 }
 
-static void s3c2412_irq_cfsdi_ack(unsigned int irqno)
+static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_CFSDI, SUBMSK_CFSDI);
+	s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
 }
 
 static struct irq_chip s3c2412_irq_cfsdi = {
 	.name		= "s3c2412-cfsdi",
-	.ack		= s3c2412_irq_cfsdi_ack,
-	.mask		= s3c2412_irq_cfsdi_mask,
-	.unmask		= s3c2412_irq_cfsdi_unmask,
+	.irq_ack	= s3c2412_irq_cfsdi_ack,
+	.irq_mask	= s3c2412_irq_cfsdi_mask,
+	.irq_unmask	= s3c2412_irq_cfsdi_unmask,
 };
 
-static int s3c2412_irq_rtc_wake(unsigned int irqno, unsigned int state)
+static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
 {
 	unsigned long pwrcfg;
 
@@ -165,7 +165,7 @@ static int s3c2412_irq_rtc_wake(unsigned int irqno, unsigned int state)
 		pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
 	__raw_writel(pwrcfg, S3C2412_PWRCFG);
 
-	return s3c_irq_chip.set_wake(irqno, state);
+	return s3c_irq_chip.irq_set_wake(data, state);
 }
 
 static struct irq_chip s3c2412_irq_rtc_chip;
@@ -193,7 +193,7 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
 	/* change RTC IRQ's set wake method */
 
 	s3c2412_irq_rtc_chip = s3c_irq_chip;
-	s3c2412_irq_rtc_chip.set_wake = s3c2412_irq_rtc_wake;
+	s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake;
 
 	set_irq_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
 

arch/arm/mach-s3c2416/Kconfig

@@ -31,6 +31,17 @@ config S3C2416_PM
 	help
 	  Internal config node to apply S3C2416 power management
 
+config S3C2416_SETUP_SDHCI
+	bool
+	select S3C2416_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S3C2416 based SDHCI systems
+
+config S3C2416_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
 menu "S3C2416 Machines"
 
 config MACH_SMDK2416
@@ -42,6 +53,7 @@ config MACH_SMDK2416
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
+	select S3C2416_SETUP_SDHCI
 	select S3C2416_PM if PM
 	help
 	  Say Y here if you are using an SMDK2416

arch/arm/mach-s3c2416/Makefile

@@ -14,6 +14,10 @@ obj-$(CONFIG_CPU_S3C2416)	+= irq.o
 obj-$(CONFIG_S3C2416_PM)	+= pm.o
 #obj-$(CONFIG_S3C2416_DMA)	+= dma.o
 
+# Device setup
+obj-$(CONFIG_S3C2416_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_SMDK2416)	+= mach-smdk2416.o

arch/arm/mach-s3c2416/clock.c

@@ -38,12 +38,11 @@ static unsigned int armdiv[8] = {
 	[7] = 8,
 };
 
-/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */
 static struct clksrc_clk hsmmc_div[] = {
 	[0] = {
 		.clk = {
 			.name	= "hsmmc-div",
-			.id	= 1,
+			.id	= 0,
 			.parent	= &clk_esysclk.clk,
 		},
 		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
@@ -51,7 +50,7 @@ static struct clksrc_clk hsmmc_div[] = {
 	[1] = {
 		.clk = {
 			.name	= "hsmmc-div",
-			.id	= 0,
+			.id	= 1,
 			.parent	= &clk_esysclk.clk,
 		},
 		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
@@ -61,7 +60,7 @@ static struct clksrc_clk hsmmc_div[] = {
 static struct clksrc_clk hsmmc_mux[] = {
 	[0] = {
 		.clk	= {
-			.id	= 1,
+			.id	= 0,
 			.name	= "hsmmc-if",
 			.ctrlbit = (1 << 6),
 			.enable = s3c2443_clkcon_enable_s,
@@ -77,7 +76,7 @@ static struct clksrc_clk hsmmc_mux[] = {
 	},
 	[1] = {
 		.clk	= {
-			.id	= 0,
+			.id	= 1,
 			.name	= "hsmmc-if",
 			.ctrlbit = (1 << 12),
 			.enable = s3c2443_clkcon_enable_s,
@@ -93,6 +92,13 @@ static struct clksrc_clk hsmmc_mux[] = {
 	},
 };
 
+static struct clk hsmmc0_clk = {
+	.name		= "hsmmc",
+	.id		= 0,
+	.parent		= &clk_h,
+	.enable		= s3c2443_clkcon_enable_h,
+	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
+};
 
 static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
 {
@@ -130,6 +136,8 @@ void __init s3c2416_init_clocks(int xtal)
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
 
+	s3c24xx_register_clock(&hsmmc0_clk);
+
 	s3c_pwmclk_init();
 
 }

arch/arm/mach-s3c2416/irq.c

@@ -77,28 +77,27 @@ static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
 #define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
 
-static void s3c2416_irq_wdtac97_mask(unsigned int irqno)
+static void s3c2416_irq_wdtac97_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+	s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
 }
 
-static void s3c2416_irq_wdtac97_unmask(unsigned int irqno)
+static void s3c2416_irq_wdtac97_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+	s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
 }
 
-static void s3c2416_irq_wdtac97_ack(unsigned int irqno)
+static void s3c2416_irq_wdtac97_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+	s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
 }
 
 static struct irq_chip s3c2416_irq_wdtac97 = {
-	.mask	    = s3c2416_irq_wdtac97_mask,
-	.unmask	    = s3c2416_irq_wdtac97_unmask,
-	.ack	    = s3c2416_irq_wdtac97_ack,
+	.irq_mask	= s3c2416_irq_wdtac97_mask,
+	.irq_unmask	= s3c2416_irq_wdtac97_unmask,
+	.irq_ack	= s3c2416_irq_wdtac97_ack,
 };
 
-
 /* LCD sub interrupts */
 
 static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
@@ -109,28 +108,27 @@ static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
 #define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
 
-static void s3c2416_irq_lcd_mask(unsigned int irqno)
+static void s3c2416_irq_lcd_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+	s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
 }
 
-static void s3c2416_irq_lcd_unmask(unsigned int irqno)
+static void s3c2416_irq_lcd_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_LCD);
+	s3c_irqsub_unmask(data->irq, INTMSK_LCD);
 }
 
-static void s3c2416_irq_lcd_ack(unsigned int irqno)
+static void s3c2416_irq_lcd_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+	s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
 }
 
 static struct irq_chip s3c2416_irq_lcd = {
-	.mask	    = s3c2416_irq_lcd_mask,
-	.unmask	    = s3c2416_irq_lcd_unmask,
-	.ack	    = s3c2416_irq_lcd_ack,
+	.irq_mask	= s3c2416_irq_lcd_mask,
+	.irq_unmask	= s3c2416_irq_lcd_unmask,
+	.irq_ack	= s3c2416_irq_lcd_ack,
 };
 
-
 /* DMA sub interrupts */
 
 static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
@@ -142,28 +140,27 @@ static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
 #define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
 
 
-static void s3c2416_irq_dma_mask(unsigned int irqno)
+static void s3c2416_irq_dma_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+	s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
 }
 
-static void s3c2416_irq_dma_unmask(unsigned int irqno)
+static void s3c2416_irq_dma_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_DMA);
+	s3c_irqsub_unmask(data->irq, INTMSK_DMA);
 }
 
-static void s3c2416_irq_dma_ack(unsigned int irqno)
+static void s3c2416_irq_dma_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+	s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
 }
 
 static struct irq_chip s3c2416_irq_dma = {
-	.mask	    = s3c2416_irq_dma_mask,
-	.unmask	    = s3c2416_irq_dma_unmask,
-	.ack	    = s3c2416_irq_dma_ack,
+	.irq_mask	= s3c2416_irq_dma_mask,
+	.irq_unmask	= s3c2416_irq_dma_unmask,
+	.irq_ack	= s3c2416_irq_dma_ack,
 };
 
-
 /* UART3 sub interrupts */
 
 static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
@@ -174,28 +171,27 @@ static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
 #define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
-static void s3c2416_irq_uart3_mask(unsigned int irqno)
+static void s3c2416_irq_uart3_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+	s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
 }
 
-static void s3c2416_irq_uart3_unmask(unsigned int irqno)
+static void s3c2416_irq_uart3_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_UART3);
+	s3c_irqsub_unmask(data->irq, INTMSK_UART3);
 }
 
-static void s3c2416_irq_uart3_ack(unsigned int irqno)
+static void s3c2416_irq_uart3_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+	s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
 }
 
 static struct irq_chip s3c2416_irq_uart3 = {
-	.mask	    = s3c2416_irq_uart3_mask,
-	.unmask	    = s3c2416_irq_uart3_unmask,
-	.ack	    = s3c2416_irq_uart3_ack,
+	.irq_mask	= s3c2416_irq_uart3_mask,
+	.irq_unmask	= s3c2416_irq_uart3_unmask,
+	.irq_ack	= s3c2416_irq_uart3_ack,
 };
 
-
 /* IRQ initialisation code */
 
 static int __init s3c2416_add_sub(unsigned int base,

arch/arm/mach-s3c2416/mach-smdk2416.c

@@ -46,6 +46,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/nand.h>
+#include <plat/sdhci.h>
 
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
@@ -110,6 +111,13 @@ static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON | 0x50,
 		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	}
 };
 
@@ -159,6 +167,18 @@ static struct s3c_fb_platdata smdk2416_fb_platdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S3C2410_GPF(1),
+	.ext_cd_gpio_invert	= 1,
+};
+
+static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_NONE,
+};
+
 static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_wdt,
@@ -180,6 +200,9 @@ static void __init smdk2416_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk2416_fb_platdata);
 
+	s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
+
 	gpio_request(S3C2410_GPB(4), "USBHost Power");
 	gpio_direction_output(S3C2410_GPB(4), 1);
 

arch/arm/mach-s3c2416/s3c2416.c

@@ -53,6 +53,7 @@
 #include <plat/s3c2416.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/sdhci.h>
 
 #include <plat/iic-core.h>
 #include <plat/fb-core.h>
@@ -115,6 +116,10 @@ void __init s3c2416_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
 	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
 
+	/* initialize device information early */
+	s3c2416_default_sdhci0();
+	s3c2416_default_sdhci1();
+
 	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
 }
 

arch/arm/mach-s3c2416/setup-sdhci-gpio.c

+/* linux/arch/arm/plat-s3c2416/setup-sdhci-gpio.c
+ *
+ * Copyright 2010 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * Based on mach-s3c64xx/setup-sdhci-gpio.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
+}
+
+void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
+}

arch/arm/mach-s3c2416/setup-sdhci.c

+/* linux/arch/arm/mach-s3c2416/setup-sdhci.c
+ *
+ * Copyright 2010 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * S3C2416 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c64xx/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c2416_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "hsmmc-if",
+	/* [3] = "48m", - note not successfully used yet */
+};
+
+void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	__raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	__raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}

arch/arm/mach-s3c2440/irq.c

@@ -69,27 +69,27 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
 #define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
 
 static void
-s3c_irq_wdtac97_mask(unsigned int irqno)
+s3c_irq_wdtac97_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
+	s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
 }
 
 static void
-s3c_irq_wdtac97_unmask(unsigned int irqno)
+s3c_irq_wdtac97_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_WDT);
+	s3c_irqsub_unmask(data->irq, INTMSK_WDT);
 }
 
 static void
-s3c_irq_wdtac97_ack(unsigned int irqno)
+s3c_irq_wdtac97_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
+	s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
 }
 
 static struct irq_chip s3c_irq_wdtac97 = {
-	.mask	    = s3c_irq_wdtac97_mask,
-	.unmask	    = s3c_irq_wdtac97_unmask,
-	.ack	    = s3c_irq_wdtac97_ack,
+	.irq_mask	= s3c_irq_wdtac97_mask,
+	.irq_unmask	= s3c_irq_wdtac97_unmask,
+	.irq_ack	= s3c_irq_wdtac97_ack,
 };
 
 static int s3c2440_irq_add(struct sys_device *sysdev)

arch/arm/mach-s3c2440/s3c244x-irq.c

@@ -68,27 +68,27 @@ static void s3c_irq_demux_cam(unsigned int irq,
 #define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
 
 static void
-s3c_irq_cam_mask(unsigned int irqno)
+s3c_irq_cam_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
+	s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
 }
 
 static void
-s3c_irq_cam_unmask(unsigned int irqno)
+s3c_irq_cam_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_CAM);
+	s3c_irqsub_unmask(data->irq, INTMSK_CAM);
 }
 
 static void
-s3c_irq_cam_ack(unsigned int irqno)
+s3c_irq_cam_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
+	s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
 }
 
 static struct irq_chip s3c_irq_cam = {
-	.mask	    = s3c_irq_cam_mask,
-	.unmask	    = s3c_irq_cam_unmask,
-	.ack	    = s3c_irq_cam_ack,
+	.irq_mask	= s3c_irq_cam_mask,
+	.irq_unmask	= s3c_irq_cam_unmask,
+	.irq_ack	= s3c_irq_cam_ack,
 };
 
 static int s3c244x_irq_add(struct sys_device *sysdev)

arch/arm/mach-s3c2443/Kconfig

@@ -10,6 +10,7 @@ config CPU_S3C2443
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
+	select S3C_GPIO_PULL_S3C2443
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -25,7 +26,7 @@ config MACH_SMDK2443
 	bool "SMDK2443"
 	select CPU_S3C2443
 	select MACH_SMDK
-	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
 	help
 	  Say Y here if you are using an SMDK2443
 

arch/arm/mach-s3c2443/clock.c

@@ -196,7 +196,7 @@ static struct clksrc_clk clk_hsspi = {
 static struct clksrc_clk clk_hsmmc_div = {
 	.clk	= {
 		.name		= "hsmmc-div",
-		.id		= -1,
+		.id		= 1,
 		.parent		= &clk_esysclk.clk,
 	},
 	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
@@ -231,7 +231,7 @@ static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
 
 static struct clk clk_hsmmc = {
 	.name		= "hsmmc-if",
-	.id		= -1,
+	.id		= 1,
 	.parent		= &clk_hsmmc_div.clk,
 	.enable		= s3c2443_enable_hsmmc,
 	.ops		= &(struct clk_ops) {

arch/arm/mach-s3c2443/irq.c

@@ -75,28 +75,27 @@ static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
 #define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
 
-static void s3c2443_irq_wdtac97_mask(unsigned int irqno)
+static void s3c2443_irq_wdtac97_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+	s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
 }
 
-static void s3c2443_irq_wdtac97_unmask(unsigned int irqno)
+static void s3c2443_irq_wdtac97_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+	s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
 }
 
-static void s3c2443_irq_wdtac97_ack(unsigned int irqno)
+static void s3c2443_irq_wdtac97_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+	s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
 }
 
 static struct irq_chip s3c2443_irq_wdtac97 = {
-	.mask	    = s3c2443_irq_wdtac97_mask,
-	.unmask	    = s3c2443_irq_wdtac97_unmask,
-	.ack	    = s3c2443_irq_wdtac97_ack,
+	.irq_mask	= s3c2443_irq_wdtac97_mask,
+	.irq_unmask	= s3c2443_irq_wdtac97_unmask,
+	.irq_ack	= s3c2443_irq_wdtac97_ack,
 };
 
-
 /* LCD sub interrupts */
 
 static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
@@ -107,28 +106,27 @@ static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
 #define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
 
-static void s3c2443_irq_lcd_mask(unsigned int irqno)
+static void s3c2443_irq_lcd_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+	s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
 }
 
-static void s3c2443_irq_lcd_unmask(unsigned int irqno)
+static void s3c2443_irq_lcd_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_LCD);
+	s3c_irqsub_unmask(data->irq, INTMSK_LCD);
 }
 
-static void s3c2443_irq_lcd_ack(unsigned int irqno)
+static void s3c2443_irq_lcd_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+	s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
 }
 
 static struct irq_chip s3c2443_irq_lcd = {
-	.mask	    = s3c2443_irq_lcd_mask,
-	.unmask	    = s3c2443_irq_lcd_unmask,
-	.ack	    = s3c2443_irq_lcd_ack,
+	.irq_mask	= s3c2443_irq_lcd_mask,
+	.irq_unmask	= s3c2443_irq_lcd_unmask,
+	.irq_ack	= s3c2443_irq_lcd_ack,
 };
 
-
 /* DMA sub interrupts */
 
 static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
@@ -139,29 +137,27 @@ static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
 #define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
 
-
-static void s3c2443_irq_dma_mask(unsigned int irqno)
+static void s3c2443_irq_dma_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+	s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
 }
 
-static void s3c2443_irq_dma_unmask(unsigned int irqno)
+static void s3c2443_irq_dma_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_DMA);
+	s3c_irqsub_unmask(data->irq, INTMSK_DMA);
 }
 
-static void s3c2443_irq_dma_ack(unsigned int irqno)
+static void s3c2443_irq_dma_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+	s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
 }
 
 static struct irq_chip s3c2443_irq_dma = {
-	.mask	    = s3c2443_irq_dma_mask,
-	.unmask	    = s3c2443_irq_dma_unmask,
-	.ack	    = s3c2443_irq_dma_ack,
+	.irq_mask	= s3c2443_irq_dma_mask,
+	.irq_unmask	= s3c2443_irq_dma_unmask,
+	.irq_ack	= s3c2443_irq_dma_ack,
 };
 
-
 /* UART3 sub interrupts */
 
 static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
@@ -172,28 +168,27 @@ static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
 #define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
-static void s3c2443_irq_uart3_mask(unsigned int irqno)
+static void s3c2443_irq_uart3_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+	s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
 }
 
-static void s3c2443_irq_uart3_unmask(unsigned int irqno)
+static void s3c2443_irq_uart3_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_UART3);
+	s3c_irqsub_unmask(data->irq, INTMSK_UART3);
 }
 
-static void s3c2443_irq_uart3_ack(unsigned int irqno)
+static void s3c2443_irq_uart3_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+	s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
 }
 
 static struct irq_chip s3c2443_irq_uart3 = {
-	.mask	    = s3c2443_irq_uart3_mask,
-	.unmask	    = s3c2443_irq_uart3_unmask,
-	.ack	    = s3c2443_irq_uart3_ack,
+	.irq_mask	= s3c2443_irq_uart3_mask,
+	.irq_unmask	= s3c2443_irq_uart3_unmask,
+	.irq_ack	= s3c2443_irq_uart3_ack,
 };
 
-
 /* CAM sub interrupts */
 
 static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
@@ -204,25 +199,25 @@ static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
 #define INTMSK_CAM	(1UL << (IRQ_CAM - IRQ_EINT0))
 #define SUBMSK_CAM	INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
 
-static void s3c2443_irq_cam_mask(unsigned int irqno)
+static void s3c2443_irq_cam_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_CAM, SUBMSK_CAM);
+	s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM);
 }
 
-static void s3c2443_irq_cam_unmask(unsigned int irqno)
+static void s3c2443_irq_cam_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_CAM);
+	s3c_irqsub_unmask(data->irq, INTMSK_CAM);
 }
 
-static void s3c2443_irq_cam_ack(unsigned int irqno)
+static void s3c2443_irq_cam_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_CAM, SUBMSK_CAM);
+	s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM);
 }
 
 static struct irq_chip s3c2443_irq_cam = {
-	.mask	    = s3c2443_irq_cam_mask,
-	.unmask	    = s3c2443_irq_cam_unmask,
-	.ack	    = s3c2443_irq_cam_ack,
+	.irq_mask	= s3c2443_irq_cam_mask,
+	.irq_unmask	= s3c2443_irq_cam_unmask,
+	.irq_ack	= s3c2443_irq_cam_ack,
 };
 
 /* IRQ initialisation code */

arch/arm/mach-s3c2443/mach-smdk2443.c

@@ -99,13 +99,20 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
 		.ucon	     = 0x3c5,
 		.ulcon	     = 0x43,
 		.ufcon	     = 0x51,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
 	}
 };
 
 static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
 #ifdef CONFIG_SND_SOC_SMDK2443_WM9710
 	&s3c_device_ac97,
 #endif

arch/arm/mach-s3c2443/s3c2443.c

@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
@@ -32,6 +33,9 @@
 #include <mach/regs-s3c2443-clock.h>
 #include <mach/reset.h>
 
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
 #include <plat/s3c2443.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -86,6 +90,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2443_map_io(void)
 {
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }
 

arch/arm/mach-s3c64xx/clock.c

@@ -127,7 +127,7 @@ int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
 	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
 }
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "nand",
 		.id		= -1,
@@ -695,7 +695,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk	= {
 			.name		= "audio-bus",
-			.id		= -1,  /* There's only one IISv4 port */
+			.id		= 2,
 			.ctrlbit        = S3C6410_CLKCON_SCLK_AUDIO2,
 			.enable		= s3c64xx_sclk_ctrl,
 		},
@@ -834,10 +834,6 @@ static struct clk *clks[] __initdata = {
 void __init s3c64xx_register_clocks(unsigned long xtal, 
 				    unsigned armclk_divlimit)
 {
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
 	armclk_mask = armclk_divlimit;
 
 	s3c24xx_register_baseclocks(xtal);
@@ -845,17 +841,8 @@ void __init s3c64xx_register_clocks(unsigned long xtal,
 
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));

arch/arm/mach-s3c64xx/dev-audio.c

@@ -22,7 +22,12 @@
 #include <plat/audio.h>
 #include <plat/gpio-cfg.h>
 
-static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+static const char *rclksrc[] = {
+	[0] = "iis",
+	[1] = "audio-bus",
+};
+
+static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 {
 	unsigned int base;
 
@@ -33,6 +38,12 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 	case 1:
 		base = S3C64XX_GPE(0);
 		break;
+	case 2:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
+		return 0;
 	default:
 		printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
 			pdev->id);
@@ -44,16 +55,6 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 	return 0;
 }
 
-static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
-	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
-	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
-	s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
-
-	return 0;
-}
-
 static struct resource s3c64xx_iis0_resource[] = {
 	[0] = {
 		.start = S3C64XX_PA_IIS0,
@@ -72,17 +73,22 @@ static struct resource s3c64xx_iis0_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2s0_pdata = {
-	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
 	.resource	  = s3c64xx_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s0_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis0);
@@ -105,17 +111,13 @@ static struct resource s3c64xx_iis1_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2s1_pdata = {
-	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
-};
-
 struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
 	.resource	  = s3c64xx_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s1_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis1);
@@ -138,17 +140,23 @@ static struct resource s3c64xx_iisv4_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2sv4_pdata = {
-	.cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+static struct s3c_audio_pdata i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
+	.name = "samsung-i2s",
+	.id = 2,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
 	.resource	  = s3c64xx_iisv4_resource,
 	.dev = {
-		.platform_data = &s3c_i2sv4_pdata,
+		.platform_data = &i2sv4_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iisv4);

arch/arm/mach-s3c64xx/dma.c

@@ -212,6 +212,7 @@ static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
 
 	config = readl(chan->regs + PL080S_CH_CONFIG);
 	config |= PL080_CONFIG_ENABLE;
+	config &= ~PL080_CONFIG_HALT;
 
 	pr_debug("%s: writing config %08x\n", __func__, config);
 	writel(config, chan->regs + PL080S_CH_CONFIG);

arch/arm/mach-s3c64xx/irq-eint.c

@@ -30,41 +30,41 @@
 #include <plat/pm.h>
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
-#define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
+#define eint_irq_to_bit(irq)	((u32)(1 << eint_offset(irq)))
 
-static inline void s3c_irq_eint_mask(unsigned int irq)
+static inline void s3c_irq_eint_mask(struct irq_data *data)
 {
 	u32 mask;
 
 	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask |= eint_irq_to_bit(irq);
+	mask |= (u32)data->chip_data;
 	__raw_writel(mask, S3C64XX_EINT0MASK);
 }
 
-static void s3c_irq_eint_unmask(unsigned int irq)
+static void s3c_irq_eint_unmask(struct irq_data *data)
 {
 	u32 mask;
 
 	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask &= ~eint_irq_to_bit(irq);
+	mask &= ~((u32)data->chip_data);
 	__raw_writel(mask, S3C64XX_EINT0MASK);
 }
 
-static inline void s3c_irq_eint_ack(unsigned int irq)
+static inline void s3c_irq_eint_ack(struct irq_data *data)
 {
-	__raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
+	__raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
 }
 
-static void s3c_irq_eint_maskack(unsigned int irq)
+static void s3c_irq_eint_maskack(struct irq_data *data)
 {
 	/* compiler should in-line these */
-	s3c_irq_eint_mask(irq);
-	s3c_irq_eint_ack(irq);
+	s3c_irq_eint_mask(data);
+	s3c_irq_eint_ack(data);
 }
 
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
 {
-	int offs = eint_offset(irq);
+	int offs = eint_offset(data->irq);
 	int pin, pin_val;
 	int shift;
 	u32 ctrl, mask;
@@ -140,12 +140,12 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 
 static struct irq_chip s3c_irq_eint = {
 	.name		= "s3c-eint",
-	.mask		= s3c_irq_eint_mask,
-	.unmask		= s3c_irq_eint_unmask,
-	.mask_ack	= s3c_irq_eint_maskack,
-	.ack		= s3c_irq_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
+	.irq_mask	= s3c_irq_eint_mask,
+	.irq_unmask	= s3c_irq_eint_unmask,
+	.irq_mask_ack	= s3c_irq_eint_maskack,
+	.irq_ack	= s3c_irq_eint_ack,
+	.irq_set_type	= s3c_irq_eint_set_type,
+	.irq_set_wake	= s3c_irqext_wake,
 };
 
 /* s3c_irq_demux_eint
@@ -198,6 +198,7 @@ static int __init s3c64xx_init_irq_eint(void)
 
 	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
 		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_chip_data(irq, (void *)eint_irq_to_bit(irq));
 		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}

arch/arm/mach-s5p6442/clock.c

@@ -340,7 +340,7 @@ void __init_or_cpufreq s5p6442_setup_clocks(void)
 	clk_pclkd1.rate = pclkd1;
 }
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "pdma",
 		.id		= -1,
@@ -408,23 +408,13 @@ static struct clk *clks[] __initdata = {
 
 void __init s5p6442_register_clocks(void)
 {
-	struct clk *clkptr;
-	int i, ret;
-
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
-	clkptr = init_clocks_disable;
-	for (i = 0; i < ARRAY_SIZE(init_clocks_disable); i++, clkptr++) {
-		ret = s3c24xx_register_clock(clkptr);
-		if (ret < 0) {
-			printk(KERN_ERR "Fail to register clock %s (%d)\n",
-					clkptr->name, ret);
-		} else
-			(clkptr->enable)(clkptr, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5p6442/dev-audio.c

@@ -29,7 +29,7 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
 		base = S5P6442_GPC1(0);
 		break;
 
-	case -1:
+	case 0:
 		base = S5P6442_GPC0(0);
 		break;
 
@@ -42,8 +42,19 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static const char *rclksrc_v35[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
+static struct s3c_audio_pdata i2sv35_pdata = {
 	.cfg_gpio = s5p6442_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc_v35,
+		},
+	},
 };
 
 static struct resource s5p6442_iis0_resource[] = {
@@ -62,15 +73,34 @@ static struct resource s5p6442_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5p6442_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
+	.name = "samsung-i2s",
+	.id = 0,
 	.num_resources	  = ARRAY_SIZE(s5p6442_iis0_resource),
 	.resource	  = s5p6442_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv35_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5p6442_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -93,12 +123,12 @@ static struct resource s5p6442_iis1_resource[] = {
 };
 
 struct platform_device s5p6442_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5p6442_iis1_resource),
 	.resource	  = s5p6442_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 

arch/arm/mach-s5p6442/include/mach/map.h

@@ -28,6 +28,9 @@
 #define S5P6442_PA_VIC1		(0xE4100000)
 #define S5P6442_PA_VIC2		(0xE4200000)
 
+#define S5P6442_PA_SROMC	(0xE7000000)
+#define S5P_PA_SROMC		S5P6442_PA_SROMC
+
 #define S5P6442_PA_MDMA		0xE8000000
 #define S5P6442_PA_PDMA		0xE9000000
 

arch/arm/mach-s5p6442/mach-smdk6442.c

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/i2c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -25,6 +26,7 @@
 #include <plat/s5p6442.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/iic.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDK6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -65,10 +67,15 @@ static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
 };
 
 static struct platform_device *smdk6442_devices[] __initdata = {
+	&s3c_device_i2c0,
 	&s5p6442_device_iis0,
 	&s3c_device_wdt,
 };
 
+static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+};
+
 static void __init smdk6442_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -78,6 +85,9 @@ static void __init smdk6442_map_io(void)
 
 static void __init smdk6442_machine_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, smdk6442_i2c_devs0,
+			ARRAY_SIZE(smdk6442_i2c_devs0));
 	platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
 }
 

arch/arm/mach-s5p6442/setup-i2c0.c

@@ -14,12 +14,15 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
+#include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	/* Will be populated later */
+	s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }

arch/arm/mach-s5p64x0/Makefile

@@ -12,9 +12,9 @@ obj-				:=
 
 # Core support for S5P64X0 system
 
-obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o gpiolib.o
 obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o
-obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o gpio.o
+obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
 obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
 
 # machine support

arch/arm/mach-s5p64x0/clock-s5p6440.c

@@ -133,7 +133,7 @@ static struct clksrc_clk clk_pclk_low = {
  * recommended to keep the following clocks disabled until the driver requests
  * for enabling the clock.
  */
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "nand",
 		.id		= -1,
@@ -261,7 +261,7 @@ static struct clk init_clocks_disable[] = {
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 25),
 	}, {
-		.name		= "i2s_v40",
+		.name		= "iis",
 		.id		= 0,
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,
@@ -419,7 +419,7 @@ static struct clksrc_sources clkset_audio = {
 static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 0,
 			.ctrlbit	= (1 << 24),
 			.enable		= s5p64x0_sclk_ctrl,
@@ -429,7 +429,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 1,
 			.ctrlbit	= (1 << 25),
 			.enable		= s5p64x0_sclk_ctrl,
@@ -439,7 +439,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 2,
 			.ctrlbit	= (1 << 26),
 			.enable		= s5p64x0_sclk_ctrl,
@@ -602,8 +602,6 @@ static struct clk *clks[] __initdata = {
 
 void __init s5p6440_register_clocks(void)
 {
-	struct clk *clkp;
-	int ret;
 	int ptr;
 
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
@@ -614,16 +612,8 @@ void __init s5p6440_register_clocks(void)
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5p64x0/clock-s5p6450.c

@@ -181,7 +181,7 @@ static struct clksrc_clk clk_pclk_low = {
  * recommended to keep the following clocks disabled until the driver requests
  * for enabling the clock.
  */
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "usbhost",
 		.id		= -1,
@@ -230,6 +230,12 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "adc",
 		.id		= -1,
@@ -256,10 +262,22 @@ static struct clk init_clocks_disable[] = {
 		.ctrlbit	= (1 << 22),
 	}, {
 		.name		= "iis",
-		.id		= -1,
+		.id		= 0,
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 16),
 	}, {
 		.name		= "i2c",
 		.id		= 1,
@@ -633,8 +651,6 @@ void __init_or_cpufreq s5p6450_setup_clocks(void)
 
 void __init s5p6450_register_clocks(void)
 {
-	struct clk *clkp;
-	int ret;
 	int ptr;
 
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
@@ -643,16 +659,8 @@ void __init s5p6450_register_clocks(void)
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5p64x0/dev-audio.c

@@ -19,15 +19,19 @@
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
+static const char *rclksrc[] = {
+	[0] = "iis",
+	[1] = "sclk_audio2",
+};
+
 static int s5p6440_cfg_i2s(struct platform_device *pdev)
 {
-	/* configure GPIO for i2s port */
 	switch (pdev->id) {
-	case -1:
-		s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5));
+	case 0:
+		s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5));
 		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -36,17 +40,58 @@ static int s5p6440_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
+static struct s3c_audio_pdata s5p6440_i2s_pdata = {
+	.cfg_gpio = s5p6440_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
+};
+
+static struct resource s5p64x0_i2s0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_I2S,
+		.end	= S5P64X0_PA_I2S + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S0_TX,
+		.end	= DMACH_I2S0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S0_RX,
+		.end	= DMACH_I2S0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_iis = {
+	.name		= "samsung-i2s",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_i2s0_resource),
+	.resource	= s5p64x0_i2s0_resource,
+	.dev = {
+		.platform_data = &s5p6440_i2s_pdata,
+	},
+};
+
 static int s5p6450_cfg_i2s(struct platform_device *pdev)
 {
-	/* configure GPIO for i2s port */
 	switch (pdev->id) {
-	case -1:
-		s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
+	case 0:
 		s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
 		s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
-
 		break;
-
+	case 1:
+		s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5));
+		break;
+	case 2:
+		s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5));
+		break;
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -55,47 +100,86 @@ static int s5p6450_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s5p6440_i2s_pdata = {
-	.cfg_gpio = s5p6440_cfg_i2s,
+static struct s3c_audio_pdata s5p6450_i2s0_pdata = {
+	.cfg_gpio = s5p6450_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
+};
+
+struct platform_device s5p6450_device_iis0 = {
+	.name		= "samsung-i2s",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_i2s0_resource),
+	.resource	= s5p64x0_i2s0_resource,
+	.dev = {
+		.platform_data = &s5p6450_i2s0_pdata,
+	},
 };
 
 static struct s3c_audio_pdata s5p6450_i2s_pdata = {
 	.cfg_gpio = s5p6450_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc,
+		},
+	},
 };
 
-static struct resource s5p64x0_iis0_resource[] = {
+static struct resource s5p6450_i2s1_resource[] = {
 	[0] = {
-		.start	= S5P64X0_PA_I2S,
-		.end	= S5P64X0_PA_I2S + 0x100 - 1,
+		.start	= S5P6450_PA_I2S1,
+		.end	= S5P6450_PA_I2S1 + 0x100 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= DMACH_I2S0_TX,
-		.end	= DMACH_I2S0_TX,
+		.start	= DMACH_I2S1_TX,
+		.end	= DMACH_I2S1_TX,
 		.flags	= IORESOURCE_DMA,
 	},
 	[2] = {
-		.start	= DMACH_I2S0_RX,
-		.end	= DMACH_I2S0_RX,
+		.start	= DMACH_I2S1_RX,
+		.end	= DMACH_I2S1_RX,
 		.flags	= IORESOURCE_DMA,
 	},
 };
 
-struct platform_device s5p6440_device_iis = {
-	.name		= "s3c64xx-iis-v4",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
-	.resource	= s5p64x0_iis0_resource,
+struct platform_device s5p6450_device_iis1 = {
+	.name		= "samsung-i2s",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p6450_i2s1_resource),
+	.resource	= s5p6450_i2s1_resource,
 	.dev = {
-		.platform_data = &s5p6440_i2s_pdata,
+		.platform_data = &s5p6450_i2s_pdata,
 	},
 };
 
-struct platform_device s5p6450_device_iis0 = {
-	.name		= "s3c64xx-iis-v4",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
-	.resource	= s5p64x0_iis0_resource,
+static struct resource s5p6450_i2s2_resource[] = {
+	[0] = {
+		.start	= S5P6450_PA_I2S2,
+		.end	= S5P6450_PA_I2S2 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S2_TX,
+		.end	= DMACH_I2S2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S2_RX,
+		.end	= DMACH_I2S2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6450_device_iis2 = {
+	.name		= "samsung-i2s",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5p6450_i2s2_resource),
+	.resource	= s5p6450_i2s2_resource,
 	.dev = {
 		.platform_data = &s5p6450_i2s_pdata,
 	},

arch/arm/mach-s5p64x0/gpio.c → arch/arm/mach-s5p64x0/gpiolib.c

-/* linux/arch/arm/mach-s5p64x0/gpio.c
+/* linux/arch/arm/mach-s5p64x0/gpiolib.c
  *
  * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -17,13 +17,12 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
-/* To be implemented S5P6450 GPIO */
-
 /*
  * S5P6440 GPIO bank summary:
  *
@@ -40,6 +39,25 @@
  * P	8	2Bit	Yes	8
  * R	15	4Bit[2]	Yes	8
  *
+ * S5P6450 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	8	4Bit	Yes	None
+ * F	2	2Bit	Yes	None
+ * G	14	4Bit[2]	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	5	4Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	11	2Bit	Yes	8
+ * Q	14	2Bit	Yes	None
+ * R	15	4Bit[2]	Yes	None
+ * S	8	2Bit	Yes	None
+ *
  * [1] BANKF pins 14,15 do not form part of the external interrupt sources
  * [2] BANK has two control registers, GPxCON0 and GPxCON1
  */
@@ -190,7 +208,7 @@ static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
 
 static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 	{
-		.base	= S5P6440_GPA_BASE,
+		.base	= S5P64X0_GPA_BASE,
 		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPA(0),
@@ -198,7 +216,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 			.label	= "GPA",
 		},
 	}, {
-		.base	= S5P6440_GPB_BASE,
+		.base	= S5P64X0_GPB_BASE,
 		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPB(0),
@@ -206,7 +224,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 			.label	= "GPB",
 		},
 	}, {
-		.base	= S5P6440_GPC_BASE,
+		.base	= S5P64X0_GPC_BASE,
 		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPC(0),
@@ -214,7 +232,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 			.label	= "GPC",
 		},
 	}, {
-		.base	= S5P6440_GPG_BASE,
+		.base	= S5P64X0_GPG_BASE,
 		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPG(0),
@@ -226,7 +244,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 
 static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
 	{
-		.base	= S5P6440_GPH_BASE + 0x4,
+		.base	= S5P64X0_GPH_BASE + 0x4,
 		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPH(0),
@@ -238,7 +256,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
 
 static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
 	{
-		.base	= S5P6440_GPR_BASE + 0x4,
+		.base	= S5P64X0_GPR_BASE + 0x4,
 		.config	= &s5p64x0_gpio_cfgs[2],
 		.chip	= {
 			.base	= S5P6440_GPR(0),
@@ -250,7 +268,7 @@ static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
 
 static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 	{
-		.base	= S5P6440_GPF_BASE,
+		.base	= S5P64X0_GPF_BASE,
 		.config	= &s5p64x0_gpio_cfgs[5],
 		.chip	= {
 			.base	= S5P6440_GPF(0),
@@ -258,7 +276,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 			.label	= "GPF",
 		},
 	}, {
-		.base	= S5P6440_GPI_BASE,
+		.base	= S5P64X0_GPI_BASE,
 		.config	= &s5p64x0_gpio_cfgs[3],
 		.chip	= {
 			.base	= S5P6440_GPI(0),
@@ -266,7 +284,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 			.label	= "GPI",
 		},
 	}, {
-		.base	= S5P6440_GPJ_BASE,
+		.base	= S5P64X0_GPJ_BASE,
 		.config	= &s5p64x0_gpio_cfgs[3],
 		.chip	= {
 			.base	= S5P6440_GPJ(0),
@@ -274,7 +292,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 			.label	= "GPJ",
 		},
 	}, {
-		.base	= S5P6440_GPN_BASE,
+		.base	= S5P64X0_GPN_BASE,
 		.config	= &s5p64x0_gpio_cfgs[4],
 		.chip	= {
 			.base	= S5P6440_GPN(0),
@@ -282,7 +300,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 			.label	= "GPN",
 		},
 	}, {
-		.base	= S5P6440_GPP_BASE,
+		.base	= S5P64X0_GPP_BASE,
 		.config	= &s5p64x0_gpio_cfgs[5],
 		.chip	= {
 			.base	= S5P6440_GPP(0),
@@ -292,6 +310,142 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 	},
 };
 
+static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
+	{
+		.base	= S5P64X0_GPA_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPA(0),
+			.ngpio	= S5P6450_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S5P64X0_GPB_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPB(0),
+			.ngpio	= S5P6450_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5P64X0_GPC_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPC(0),
+			.ngpio	= S5P6450_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P6450_GPD_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPD(0),
+			.ngpio	= S5P6450_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5P6450_GPK_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPK(0),
+			.ngpio	= S5P6450_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
+	{
+		.base	= S5P64X0_GPG_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPG(0),
+			.ngpio	= S5P6450_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPH(0),
+			.ngpio	= S5P6450_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[2],
+		.chip	= {
+			.base	= S5P6450_GPR(0),
+			.ngpio	= S5P6450_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPF(0),
+			.ngpio	= S5P6450_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &s5p64x0_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6450_GPI(0),
+			.ngpio	= S5P6450_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &s5p64x0_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6450_GPJ(0),
+			.ngpio	= S5P6450_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &s5p64x0_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPN(0),
+			.ngpio	= S5P6450_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPP(0),
+			.ngpio	= S5P6450_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S5P6450_GPQ_BASE,
+		.config	= &s5p64x0_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPQ(0),
+			.ngpio	= S5P6450_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S5P6450_GPS_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPS(0),
+			.ngpio	= S5P6450_GPIO_S_NR,
+			.label	= "GPS",
+		},
+	},
+};
+
 void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
 {
 	for (; nr_chips > 0; nr_chips--, chipcfg++) {
@@ -317,16 +471,30 @@ static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
 	}
 }
 
-static int __init s5p6440_gpiolib_init(void)
+static int __init s5p64x0_gpiolib_init(void)
 {
-	struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
-	int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
+	unsigned int chipid;
+
+	chipid = __raw_readl(S5P64X0_SYS_ID);
 
 	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
 				ARRAY_SIZE(s5p64x0_gpio_cfgs));
 
-	for (; nr_chips > 0; nr_chips--, chips++)
-		s3c_gpiolib_add(chips);
+	if ((chipid & 0xff000) == 0x50000) {
+		samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
+					ARRAY_SIZE(s5p6450_gpio_2bit));
+
+		samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
+					ARRAY_SIZE(s5p6450_gpio_4bit));
+
+		samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
+					ARRAY_SIZE(s5p6450_gpio_4bit2));
+
+		s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
+					ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
+	} else {
+		samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
+					ARRAY_SIZE(s5p6440_gpio_2bit));
 
 		samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
 					ARRAY_SIZE(s5p6440_gpio_4bit));
@@ -336,7 +504,8 @@ static int __init s5p6440_gpiolib_init(void)
 
 		s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
 					ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
+	}
 
 	return 0;
 }
-arch_initcall(s5p6440_gpiolib_init);
+core_initcall(s5p64x0_gpiolib_init);

arch/arm/mach-s5p64x0/include/mach/map.h

@@ -29,6 +29,9 @@
 #define S5P64X0_PA_VIC0		(0xE4000000)
 #define S5P64X0_PA_VIC1		(0xE4100000)
 
+#define S5P64X0_PA_SROMC	(0xE7000000)
+#define S5P_PA_SROMC		S5P64X0_PA_SROMC
+
 #define S5P64X0_PA_PDMA		(0xE9000000)
 
 #define S5P64X0_PA_TIMER	(0xEA000000)
@@ -63,6 +66,8 @@
 #define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
 #define S5P64X0_PA_I2S		(0xF2000000)
+#define S5P6450_PA_I2S1		0xF2800000
+#define S5P6450_PA_I2S2		0xF2900000
 
 #define S5P64X0_PA_PCM		(0xF2100000)
 

arch/arm/mach-s5p64x0/include/mach/regs-gpio.h

@@ -15,48 +15,23 @@
 
 #include <mach/map.h>
 
-/* Will be implemented S5P6442 GPIOlib */
-
 /* Base addresses for each of the banks */
 
-#define S5P6440_GPA_BASE		(S5P_VA_GPIO + 0x0000)
-#define S5P6440_GPB_BASE		(S5P_VA_GPIO + 0x0020)
-#define S5P6440_GPC_BASE		(S5P_VA_GPIO + 0x0040)
-#define S5P6440_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
-#define S5P6440_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
-#define S5P6440_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
-#define S5P6440_GPI_BASE		(S5P_VA_GPIO + 0x0100)
-#define S5P6440_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
-#define S5P6440_GPN_BASE		(S5P_VA_GPIO + 0x0830)
-#define S5P6440_GPP_BASE		(S5P_VA_GPIO + 0x0160)
-#define S5P6440_GPR_BASE		(S5P_VA_GPIO + 0x0290)
-
-#define S5P6440_EINT0CON0		(S5P_VA_GPIO + 0x900)
-#define S5P6440_EINT0FLTCON0		(S5P_VA_GPIO + 0x910)
-#define S5P6440_EINT0FLTCON1		(S5P_VA_GPIO + 0x914)
-#define S5P6440_EINT0MASK		(S5P_VA_GPIO + 0x920)
-#define S5P6440_EINT0PEND		(S5P_VA_GPIO + 0x924)
-
-/* for LCD */
-
-#define S5P6440_SPCON_LCD_SEL_RGB	(1 << 0)
-#define S5P6440_SPCON_LCD_SEL_MASK	(3 << 0)
-
-/*
- * These set of macros are not really useful for the
- * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit)
- */
-
-#define S5P6440_GPIO_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S5P6440_GPIO_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S5P6440_GPIO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-/*
- * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
- */
-
-#define S5P6440_GPIO2_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S5P6440_GPIO2_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S5P6440_GPIO2_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+#define S5P64X0_GPA_BASE		(S5P_VA_GPIO + 0x0000)
+#define S5P64X0_GPB_BASE		(S5P_VA_GPIO + 0x0020)
+#define S5P64X0_GPC_BASE		(S5P_VA_GPIO + 0x0040)
+#define S5P64X0_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
+#define S5P64X0_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
+#define S5P64X0_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
+#define S5P64X0_GPI_BASE		(S5P_VA_GPIO + 0x0100)
+#define S5P64X0_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
+#define S5P64X0_GPN_BASE		(S5P_VA_GPIO + 0x0830)
+#define S5P64X0_GPP_BASE		(S5P_VA_GPIO + 0x0160)
+#define S5P64X0_GPR_BASE		(S5P_VA_GPIO + 0x0290)
+
+#define S5P6450_GPD_BASE		(S5P_VA_GPIO + 0x0060)
+#define S5P6450_GPK_BASE		(S5P_VA_GPIO + 0x0140)
+#define S5P6450_GPQ_BASE		(S5P_VA_GPIO + 0x0180)
+#define S5P6450_GPS_BASE		(S5P_VA_GPIO + 0x0300)
 
 #endif /* __ASM_ARCH_REGS_GPIO_H */

arch/arm/mach-s5p64x0/mach-smdk6440.c

@@ -117,6 +117,7 @@ static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
 
 static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 };
 
 static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {

arch/arm/mach-s5p64x0/mach-smdk6450.c

@@ -135,6 +135,7 @@ static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
 };
 
 static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 	{ I2C_BOARD_INFO("24c08", 0x50), },	/* Samsung KS24C080C EEPROM */
 };
 

arch/arm/mach-s5pc100/clock.c

@@ -396,7 +396,7 @@ static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
  * recommended to keep the following clocks disabled until the driver requests
  * for enabling the clock.
  */
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "cssys",
 		.id		= -1,
@@ -1381,8 +1381,6 @@ static struct clk *clks[] __initdata = {
 
 void __init s5pc100_register_clocks(void)
 {
-	struct clk *clkp;
-	int ret;
 	int ptr;
 
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
@@ -1393,16 +1391,8 @@ void __init s5pc100_register_clocks(void)
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5pc100/dev-audio.c

@@ -23,17 +23,14 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
+	case 0: /* Dedicated pins */
+		break;
 	case 1:
 		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
 		break;
-
 	case 2:
 		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
 		break;
-
-	case -1: /* Dedicated pins */
-		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -42,8 +39,20 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static const char *rclksrc_v5[] = {
+	[0] = "iis",
+	[1] = "i2sclkd2",
+};
+
+static struct s3c_audio_pdata i2sv5_pdata = {
 	.cfg_gpio = s5pc100_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc_v5,
+		},
+	},
 };
 
 static struct resource s5pc100_iis0_resource[] = {
@@ -62,15 +71,34 @@ static struct resource s5pc100_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5pc100_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
+	.name = "samsung-i2s",
+	.id = 0,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
 	.resource	  = s5pc100_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pc100_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -93,12 +121,12 @@ static struct resource s5pc100_iis1_resource[] = {
 };
 
 struct platform_device s5pc100_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
 	.resource	  = s5pc100_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
@@ -121,12 +149,12 @@ static struct resource s5pc100_iis2_resource[] = {
 };
 
 struct platform_device s5pc100_device_iis2 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 2,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
 	.resource	  = s5pc100_iis2_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 

arch/arm/mach-s5pc100/include/mach/map.h

@@ -55,6 +55,8 @@
 #define S5PC100_VA_VIC_OFFSET	0x10000
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
 
+#define S5PC100_PA_SROMC	(0xE7000000)
+#define S5P_PA_SROMC		S5PC100_PA_SROMC
 
 #define S5PC100_PA_ONENAND	(0xE7100000)
 

arch/arm/mach-s5pv210/Kconfig

@@ -118,6 +118,7 @@ menu "S5PV210 Machines"
 config MACH_SMDKV210
 	bool "SMDKV210"
 	select CPU_S5PV210
+	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
@@ -130,6 +131,7 @@ config MACH_SMDKV210
 	select SAMSUNG_DEV_IDE
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_TS
+	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_IDE

arch/arm/mach-s5pv210/clock.c

@@ -309,7 +309,7 @@ static struct clk_ops clk_fout_apll_ops = {
 	.get_rate	= s5pv210_clk_fout_apll_get_rate,
 };
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "pdma",
 		.id		= 0,
@@ -467,20 +467,20 @@ static struct clk init_clocks_disable[] = {
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<21),
 	}, {
-		.name		= "i2s_v50",
+		.name		= "iis",
 		.id		= 0,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<4),
 	}, {
-		.name		= "i2s_v32",
-		.id		= 0,
+		.name		= "iis",
+		.id		= 1,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
-		.name		= "i2s_v32",
-		.id		= 1,
+		.name		= "iis",
+		.id		= 2,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 6),
@@ -525,6 +525,12 @@ static struct clk init_clocks[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 26),
 	},
 };
 
@@ -1220,13 +1226,9 @@ static struct clk *clks[] __initdata = {
 
 void __init s5pv210_register_clocks(void)
 {
-	struct clk *clkp;
-	int ret;
 	int ptr;
 
-	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-	if (ret > 0)
-		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
@@ -1234,15 +1236,8 @@ void __init s5pv210_register_clocks(void)
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5pv210/cpu.c

@@ -80,11 +80,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C_PA_UART),
 		.length		= SZ_512K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_DMC0,
 		.pfn		= __phys_to_pfn(S5PV210_PA_DMC0),

arch/arm/mach-s5pv210/dev-audio.c

@@ -19,22 +19,24 @@
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
+static const char *rclksrc[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
 static int s5pv210_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
+		break;
 	case 1:
 		s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
 		break;
-
 	case 2:
 		s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
 		break;
-
-	case -1:
-		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
-		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -43,8 +45,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static struct s3c_audio_pdata i2sv5_pdata = {
 	.cfg_gpio = s5pv210_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 static struct resource s5pv210_iis0_resource[] = {
@@ -63,15 +72,34 @@ static struct resource s5pv210_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5pv210_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
+	.name = "samsung-i2s",
+	.id = 0,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis0_resource),
 	.resource	  = s5pv210_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "audio-bus",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pv210_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -94,12 +122,12 @@ static struct resource s5pv210_iis1_resource[] = {
 };
 
 struct platform_device s5pv210_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis1_resource),
 	.resource	  = s5pv210_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
@@ -122,12 +150,12 @@ static struct resource s5pv210_iis2_resource[] = {
 };
 
 struct platform_device s5pv210_device_iis2 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 2,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis2_resource),
 	.resource	  = s5pv210_iis2_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 

arch/arm/mach-s5pv210/include/mach/irqs.h

@@ -65,7 +65,7 @@
 #define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
 #define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
 #define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
-#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPI_CSIS		S5P_IRQ_VIC1(29)
 #define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
 #define IRQ_ONENAND_AUDI	S5P_IRQ_VIC1(31)
 
@@ -132,5 +132,6 @@
 #define IRQ_LCD_FIFO		IRQ_LCD0
 #define IRQ_LCD_VSYNC		IRQ_LCD1
 #define IRQ_LCD_SYSTEM		IRQ_LCD2
+#define IRQ_MIPI_CSIS0		IRQ_MIPI_CSIS
 
 #endif /* ASM_ARCH_IRQS_H */

arch/arm/mach-s5pv210/include/mach/map.h

@@ -16,6 +16,8 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
+#define S5PV210_PA_SROM_BANK5	(0xA8000000)
+
 #define S5PC110_PA_ONENAND	(0xB0000000)
 #define S5P_PA_ONENAND		S5PC110_PA_ONENAND
 
@@ -60,6 +62,7 @@
 #define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #define S5PV210_PA_SROMC	(0xE8000000)
+#define S5P_PA_SROMC		S5PV210_PA_SROMC
 
 #define S5PV210_PA_CFCON	(0xE8200000)
 
@@ -107,6 +110,8 @@
 #define S5PV210_PA_DMC0		(0xF0000000)
 #define S5PV210_PA_DMC1		(0xF1400000)
 
+#define S5PV210_PA_MIPI_CSIS	0xFA600000
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5PV210_PA_UART
 #define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
@@ -123,6 +128,7 @@
 #define S5P_PA_FIMC0		S5PV210_PA_FIMC0
 #define S5P_PA_FIMC1		S5PV210_PA_FIMC1
 #define S5P_PA_FIMC2		S5PV210_PA_FIMC2
+#define S5P_PA_MIPI_CSIS0	S5PV210_PA_MIPI_CSIS
 
 #define SAMSUNG_PA_ADC		S5PV210_PA_ADC
 #define SAMSUNG_PA_CFCON	S5PV210_PA_CFCON

arch/arm/mach-s5pv210/include/mach/regs-clock.h

@@ -161,7 +161,7 @@
 #define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
 #define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
 #define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
-#define S5P_MIPI_CONTROL	S5P_CLKREG(0xE814)
+#define S5P_MIPI_DPHY_CONTROL	S5P_CLKREG(0xE814)
 
 #define S5P_IDLE_CFG_TL_MASK	(3 << 30)
 #define S5P_IDLE_CFG_TM_MASK	(3 << 28)
@@ -195,9 +195,6 @@
 #define S5P_OTHERS_RET_UART		(1 << 28)
 #define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
 
-/* MIPI */
-#define S5P_MIPI_DPHY_EN		(3)
-
 /* S5P_DAC_CONTROL */
 #define S5P_DAC_ENABLE			(1)
 #define S5P_DAC_DISABLE			(0)

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -94,6 +94,7 @@ static struct platform_device *smdkc110_devices[] __initdata = {
 
 static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 };
 
 static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = {

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -14,16 +14,25 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
+#include <linux/dm9000.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
+
 #include <mach/map.h>
 #include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
+#include <plat/gpio-cfg.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -33,6 +42,7 @@
 #include <plat/iic.h>
 #include <plat/keypad.h>
 #include <plat/pm.h>
+#include <plat/fb.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -102,12 +112,106 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
 	.cols		= 8,
 };
 
+static struct resource smdkv210_dm9000_resources[] = {
+	[0] = {
+		.start	= S5PV210_PA_SROM_BANK5,
+		.end	= S5PV210_PA_SROM_BANK5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S5PV210_PA_SROM_BANK5 + 2,
+		.end	= S5PV210_PA_SROM_BANK5 + 2,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_EINT(9),
+		.end	= IRQ_EINT(9),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct dm9000_plat_data smdkv210_dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
+	.dev_addr	= { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
+};
+
+struct platform_device smdkv210_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smdkv210_dm9000_resources),
+	.resource	= smdkv210_dm9000_resources,
+	.dev		= {
+		.platform_data	= &smdkv210_dm9000_platdata,
+	},
+};
+
+static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
+					unsigned int power)
+{
+	if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request(S5PV210_GPD0(3), "GPD0");
+		gpio_direction_output(S5PV210_GPD0(3), 1);
+		gpio_free(S5PV210_GPD0(3));
+#endif
+
+		/* fire nRESET on power up */
+		gpio_request(S5PV210_GPH0(6), "GPH0");
+
+		gpio_direction_output(S5PV210_GPH0(6), 1);
+
+		gpio_set_value(S5PV210_GPH0(6), 0);
+		mdelay(10);
+
+		gpio_set_value(S5PV210_GPH0(6), 1);
+		mdelay(10);
+
+		gpio_free(S5PV210_GPH0(6));
+	} else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request(S5PV210_GPD0(3), "GPD0");
+		gpio_direction_output(S5PV210_GPD0(3), 0);
+		gpio_free(S5PV210_GPD0(3));
+#endif
+	}
+}
+
+static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
+	.set_power	= smdkv210_lte480wv_set_power,
+};
+
+static struct platform_device smdkv210_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdkv210_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv210_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 13,
+		.right_margin	= 8,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
+	.win[0]		= &smdkv210_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
+};
+
 static struct platform_device *smdkv210_devices[] __initdata = {
-	&s5pv210_device_iis0,
-	&s5pv210_device_ac97,
-	&s5pv210_device_spdif,
 	&s3c_device_adc,
 	&s3c_device_cfcon,
+	&s3c_device_fb,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
@@ -115,14 +219,37 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_i2c2,
-	&samsung_device_keypad,
 	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
+	&s5pv210_device_ac97,
+	&s5pv210_device_iis0,
+	&s5pv210_device_spdif,
+	&samsung_device_keypad,
+	&smdkv210_dm9000,
+	&smdkv210_lcd_lte480wv,
 };
 
+static void __init smdkv210_dm9000_init(void)
+{
+	unsigned int tmp;
+
+	gpio_request(S5PV210_MP01(5), "nCS5");
+	s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
+	gpio_free(S5PV210_MP01(5));
+
+	tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
+	__raw_writel(tmp, S5P_SROM_BC5);
+
+	tmp = __raw_readl(S5P_SROM_BW);
+	tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
+	tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
+	__raw_writel(tmp, S5P_SROM_BW);
+}
+
 static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 };
 
 static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
@@ -150,6 +277,8 @@ static void __init smdkv210_machine_init(void)
 {
 	s3c_pm_init();
 
+	smdkv210_dm9000_init();
+
 	samsung_keypad_set_platdata(&smdkv210_keypad_data);
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 
@@ -165,6 +294,8 @@ static void __init smdkv210_machine_init(void)
 
 	s3c_ide_set_platdata(&smdkv210_ide_pdata);
 
+	s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
+
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }
 

arch/arm/mach-s5pv310/Kconfig

@@ -11,9 +11,15 @@ if ARCH_S5PV310
 
 config CPU_S5PV310
 	bool
+	select S3C_PL330_DMA
 	help
 	  Enable S5PV310 CPU support
 
+config S5PV310_DEV_PD
+	bool
+	help
+	  Compile in platform device definitions for Power Domain
+
 config S5PV310_SETUP_I2C1
 	bool
 	help
@@ -60,6 +66,11 @@ config S5PV310_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
+config S5PV310_DEV_SYSMMU
+	bool
+	help
+	  Common setup code for SYSTEM MMU in S5PV310
+
 # machine support
 
 menu "S5PC210 Machines"
@@ -69,11 +80,15 @@ config MACH_SMDKC210
 	select CPU_S5PV310
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S3C_DEV_I2C1
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select S5PV310_DEV_PD
+	select S5PV310_SETUP_I2C1
 	select S5PV310_SETUP_SDHCI
+	select S5PV310_DEV_SYSMMU
 	help
 	  Machine support for Samsung SMDKC210
 	  S5PC210(MCP) is one of package option of S5PV310
@@ -82,6 +97,10 @@ config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_S5PV310
 	select S5P_DEV_ONENAND
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S5PV310_SETUP_SDHCI
 	select S3C_DEV_I2C1
 	select S5PV310_SETUP_I2C1
 	help
@@ -97,10 +116,13 @@ config MACH_SMDKV310
 	select CPU_S5PV310
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S3C_DEV_I2C1
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select S5PV310_DEV_PD
+	select S5PV310_SETUP_I2C1
 	select S5PV310_SETUP_SDHCI
 	help
 	  Machine support for Samsung SMDKV310

arch/arm/mach-s5pv310/Makefile

@@ -13,7 +13,8 @@ obj-				:=
 # Core support for S5PV310 system
 
 obj-$(CONFIG_CPU_S5PV310)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o gpiolib.o irq-eint.o
+obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
@@ -27,6 +28,10 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 
 # device support
 
+obj-y					+= dev-audio.o
+obj-$(CONFIG_S5PV310_DEV_PD)		+= dev-pd.o
+obj-$(CONFIG_S5PV310_DEV_SYSMMU)	+= dev-sysmmu.o
+
 obj-$(CONFIG_S5PV310_SETUP_I2C1)	+= setup-i2c1.o
 obj-$(CONFIG_S5PV310_SETUP_I2C2)	+= setup-i2c2.o
 obj-$(CONFIG_S5PV310_SETUP_I2C3)	+= setup-i2c3.o

arch/arm/mach-s5pv310/clock.c

@@ -244,7 +244,7 @@ static struct clksrc_clk clk_mout_corebus = {
 		.id		= -1,
 	},
 	.sources	= &clkset_mout_corebus,
-	.reg_src	= { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 },
+	.reg_src	= { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 },
 };
 
 static struct clksrc_clk clk_sclk_dmc = {
@@ -253,7 +253,7 @@ static struct clksrc_clk clk_sclk_dmc = {
 		.id		= -1,
 		.parent		= &clk_mout_corebus.clk,
 	},
-	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 },
+	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 },
 };
 
 static struct clksrc_clk clk_aclk_cored = {
@@ -262,7 +262,7 @@ static struct clksrc_clk clk_aclk_cored = {
 		.id		= -1,
 		.parent		= &clk_sclk_dmc.clk,
 	},
-	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 },
+	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 },
 };
 
 static struct clksrc_clk clk_aclk_corep = {
@@ -271,7 +271,7 @@ static struct clksrc_clk clk_aclk_corep = {
 		.id		= -1,
 		.parent		= &clk_aclk_cored.clk,
 	},
-	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 },
+	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 },
 };
 
 static struct clksrc_clk clk_aclk_acp = {
@@ -280,7 +280,7 @@ static struct clksrc_clk clk_aclk_acp = {
 		.id		= -1,
 		.parent		= &clk_mout_corebus.clk,
 	},
-	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 },
+	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 },
 };
 
 static struct clksrc_clk clk_pclk_acp = {
@@ -289,7 +289,7 @@ static struct clksrc_clk clk_pclk_acp = {
 		.id		= -1,
 		.parent		= &clk_aclk_acp.clk,
 	},
-	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 },
+	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 },
 };
 
 /* Core list of CMU_TOP side */
@@ -384,7 +384,7 @@ static struct clksrc_clk clk_sclk_vpll = {
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
 };
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "timers",
 		.id		= -1,
@@ -466,6 +466,16 @@ static struct clk init_clocks_disable[] = {
 		.id		= -1,
 		.enable		= s5pv310_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "pdma",
+		.id		= 0,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 1),
 	}, {
 		.name		= "adc",
 		.id		= -1,
@@ -506,6 +516,26 @@ static struct clk init_clocks_disable[] = {
 		.id		= 2,
 		.enable		= s5pv310_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 27),
 	}, {
 		.name		= "fimg2d",
 		.id		= -1,
@@ -990,6 +1020,17 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_dout_mmc4,
 };
 
+static int xtal_rate;
+
+static unsigned long s5pv310_fout_apll_get_rate(struct clk *clk)
+{
+	return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+}
+
+static struct clk_ops s5pv310_fout_apll_ops = {
+	.get_rate = s5pv310_fout_apll_get_rate,
+};
+
 void __init_or_cpufreq s5pv310_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1013,6 +1054,9 @@ void __init_or_cpufreq s5pv310_setup_clocks(void)
 	BUG_ON(IS_ERR(xtal_clk));
 
 	xtal = clk_get_rate(xtal_clk);
+
+	xtal_rate = xtal;
+
 	clk_put(xtal_clk);
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
@@ -1026,7 +1070,7 @@ void __init_or_cpufreq s5pv310_setup_clocks(void)
 	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
 				__raw_readl(S5P_VPLL_CON1), pll_4650);
 
-	clk_fout_apll.rate = apll;
+	clk_fout_apll.ops = &s5pv310_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
 	clk_fout_vpll.rate = vpll;
@@ -1061,13 +1105,9 @@ static struct clk *clks[] __initdata = {
 
 void __init s5pv310_register_clocks(void)
 {
-	struct clk *clkp;
-	int ret;
 	int ptr;
 
-	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-	if (ret > 0)
-		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
@@ -1075,15 +1115,8 @@ void __init s5pv310_register_clocks(void)
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5pv310/cpu.c

@@ -40,6 +40,11 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S5PV310_PA_CMU),
 		.length		= SZ_128K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_PMU,
+		.pfn		= __phys_to_pfn(S5PV310_PA_PMU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
 		.pfn		= __phys_to_pfn(S5PV310_PA_COMBINER),
@@ -70,6 +75,11 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S5PV310_PA_GPIO3),
 		.length		= SZ_256,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC0,
+		.pfn		= __phys_to_pfn(S5PV310_PA_DMC0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S3C_VA_UART,
 		.pfn		= __phys_to_pfn(S3C_PA_UART),
@@ -123,6 +133,15 @@ void __init s5pv310_init_irq(void)
 	gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+		/*
+		 * From SPI(0) to SPI(39) and SPI(51), SPI(53) are
+		 * connected to the interrupt combiner. These irqs
+		 * should be initialized to support cascade interrupt.
+		 */
+		if ((irq >= 40) && !(irq == 51) && !(irq == 53))
+			continue;
+
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
 				COMBINER_IRQ(irq, 0));
 		combiner_cascade_irq(irq, IRQ_SPI(irq));
@@ -164,7 +183,7 @@ static int __init s5pv310_l2x0_cache_init(void)
 	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
 		     S5P_VA_L2CC + L2X0_POWER_CTRL);
 
-	l2x0_init(S5P_VA_L2CC, 0x7C070001, 0xC200ffff);
+	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
 
 	return 0;
 }

arch/arm/mach-s5pv310/cpufreq.c

+/* linux/arch/arm/mach-s5pv310/cpufreq.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - CPU frequency scaling support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/cpufreq.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
+
+#include <plat/clock.h>
+#include <plat/pm.h>
+
+static struct clk *cpu_clk;
+static struct clk *moutcore;
+static struct clk *mout_mpll;
+static struct clk *mout_apll;
+
+#ifdef CONFIG_REGULATOR
+static struct regulator *arm_regulator;
+static struct regulator *int_regulator;
+#endif
+
+static struct cpufreq_freqs freqs;
+static unsigned int memtype;
+
+enum s5pv310_memory_type {
+	DDR2 = 4,
+	LPDDR2,
+	DDR3,
+};
+
+enum cpufreq_level_index {
+	L0, L1, L2, L3, CPUFREQ_LEVEL_END,
+};
+
+static struct cpufreq_frequency_table s5pv310_freq_table[] = {
+	{L0, 1000*1000},
+	{L1, 800*1000},
+	{L2, 400*1000},
+	{L3, 100*1000},
+	{0, CPUFREQ_TABLE_END},
+};
+
+static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = {
+	/*
+	 * Clock divider value for following
+	 * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
+	 *		DIVATB, DIVPCLK_DBG, DIVAPLL }
+	 */
+
+	/* ARM L0: 1000MHz */
+	{ 0, 3, 7, 3, 3, 0, 1 },
+
+	/* ARM L1: 800MHz */
+	{ 0, 3, 7, 3, 3, 0, 1 },
+
+	/* ARM L2: 400MHz */
+	{ 0, 1, 3, 1, 3, 0, 1 },
+
+	/* ARM L3: 100MHz */
+	{ 0, 0, 1, 0, 3, 1, 1 },
+};
+
+static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
+	/*
+	 * Clock divider value for following
+	 * { DIVCOPY, DIVHPM }
+	 */
+
+	 /* ARM L0: 1000MHz */
+	{ 3, 0 },
+
+	/* ARM L1: 800MHz */
+	{ 3, 0 },
+
+	/* ARM L2: 400MHz */
+	{ 3, 0 },
+
+	/* ARM L3: 100MHz */
+	{ 3, 0 },
+};
+
+static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = {
+	/*
+	 * Clock divider value for following
+	 * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
+	 *		DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
+	 */
+
+	/* DMC L0: 400MHz */
+	{ 3, 1, 1, 1, 1, 1, 3, 1 },
+
+	/* DMC L1: 400MHz */
+	{ 3, 1, 1, 1, 1, 1, 3, 1 },
+
+	/* DMC L2: 266.7MHz */
+	{ 7, 1, 1, 2, 1, 1, 3, 1 },
+
+	/* DMC L3: 200MHz */
+	{ 7, 1, 1, 3, 1, 1, 3, 1 },
+};
+
+static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = {
+	/*
+	 * Clock divider value for following
+	 * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
+	 */
+
+	/* ACLK200 L0: 200MHz */
+	{ 3, 7, 4, 5, 1 },
+
+	/* ACLK200 L1: 200MHz */
+	{ 3, 7, 4, 5, 1 },
+
+	/* ACLK200 L2: 160MHz */
+	{ 4, 7, 5, 7, 1 },
+
+	/* ACLK200 L3: 133.3MHz */
+	{ 5, 7, 7, 7, 1 },
+};
+
+static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = {
+	/*
+	 * Clock divider value for following
+	 * { DIVGDL/R, DIVGPL/R }
+	 */
+
+	/* ACLK_GDL/R L0: 200MHz */
+	{ 3, 1 },
+
+	/* ACLK_GDL/R L1: 200MHz */
+	{ 3, 1 },
+
+	/* ACLK_GDL/R L2: 160MHz */
+	{ 4, 1 },
+
+	/* ACLK_GDL/R L3: 133.3MHz */
+	{ 5, 1 },
+};
+
+struct cpufreq_voltage_table {
+	unsigned int	index;		/* any */
+	unsigned int	arm_volt;	/* uV */
+	unsigned int	int_volt;
+};
+
+static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = {
+	{
+		.index		= L0,
+		.arm_volt	= 1200000,
+		.int_volt	= 1100000,
+	}, {
+		.index		= L1,
+		.arm_volt	= 1100000,
+		.int_volt	= 1100000,
+	}, {
+		.index		= L2,
+		.arm_volt	= 1000000,
+		.int_volt	= 1000000,
+	}, {
+		.index		= L3,
+		.arm_volt	= 900000,
+		.int_volt	= 1000000,
+	},
+};
+
+static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = {
+	/* APLL FOUT L0: 1000MHz */
+	((250 << 16) | (6 << 8) | 1),
+
+	/* APLL FOUT L1: 800MHz */
+	((200 << 16) | (6 << 8) | 1),
+
+	/* APLL FOUT L2 : 400MHz */
+	((200 << 16) | (6 << 8) | 2),
+
+	/* APLL FOUT L3: 100MHz */
+	((200 << 16) | (6 << 8) | 4),
+};
+
+int s5pv310_verify_speed(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, s5pv310_freq_table);
+}
+
+unsigned int s5pv310_getspeed(unsigned int cpu)
+{
+	return clk_get_rate(cpu_clk) / 1000;
+}
+
+void s5pv310_set_clkdiv(unsigned int div_index)
+{
+	unsigned int tmp;
+
+	/* Change Divider - CPU0 */
+
+	tmp = __raw_readl(S5P_CLKDIV_CPU);
+
+	tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK |
+		S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK |
+		S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK |
+		S5P_CLKDIV_CPU0_APLL_MASK);
+
+	tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) |
+		(clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) |
+		(clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) |
+		(clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) |
+		(clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) |
+		(clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+		(clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT));
+
+	__raw_writel(tmp, S5P_CLKDIV_CPU);
+
+	do {
+		tmp = __raw_readl(S5P_CLKDIV_STATCPU);
+	} while (tmp & 0x1111111);
+
+	/* Change Divider - CPU1 */
+
+	tmp = __raw_readl(S5P_CLKDIV_CPU1);
+
+	tmp &= ~((0x7 << 4) | 0x7);
+
+	tmp |= ((clkdiv_cpu1[div_index][0] << 4) |
+		(clkdiv_cpu1[div_index][1] << 0));
+
+	__raw_writel(tmp, S5P_CLKDIV_CPU1);
+
+	do {
+		tmp = __raw_readl(S5P_CLKDIV_STATCPU1);
+	} while (tmp & 0x11);
+
+	/* Change Divider - DMC0 */
+
+	tmp = __raw_readl(S5P_CLKDIV_DMC0);
+
+	tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK |
+		S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK |
+		S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK |
+		S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK);
+
+	tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) |
+		(clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+		(clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) |
+		(clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) |
+		(clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) |
+		(clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) |
+		(clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) |
+		(clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT));
+
+	__raw_writel(tmp, S5P_CLKDIV_DMC0);
+
+	do {
+		tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
+	} while (tmp & 0x11111111);
+
+	/* Change Divider - TOP */
+
+	tmp = __raw_readl(S5P_CLKDIV_TOP);
+
+	tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK |
+		S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK |
+		S5P_CLKDIV_TOP_ONENAND_MASK);
+
+	tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) |
+		(clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) |
+		(clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) |
+		(clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) |
+		(clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT));
+
+	__raw_writel(tmp, S5P_CLKDIV_TOP);
+
+	do {
+		tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
+	} while (tmp & 0x11111);
+
+	/* Change Divider - LEFTBUS */
+
+	tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
+
+	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+
+	tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) |
+		(clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT));
+
+	__raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
+
+	do {
+		tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
+	} while (tmp & 0x11);
+
+	/* Change Divider - RIGHTBUS */
+
+	tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
+
+	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+
+	tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) |
+		(clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT));
+
+	__raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
+
+	do {
+		tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
+	} while (tmp & 0x11);
+}
+
+static void s5pv310_set_apll(unsigned int index)
+{
+	unsigned int tmp;
+
+	/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+	clk_set_parent(moutcore, mout_mpll);
+
+	do {
+		tmp = (__raw_readl(S5P_CLKMUX_STATCPU)
+			>> S5P_CLKSRC_CPU_MUXCORE_SHIFT);
+		tmp &= 0x7;
+	} while (tmp != 0x2);
+
+	/* 2. Set APLL Lock time */
+	__raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK);
+
+	/* 3. Change PLL PMS values */
+	tmp = __raw_readl(S5P_APLL_CON0);
+	tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
+	tmp |= s5pv310_apll_pms_table[index];
+	__raw_writel(tmp, S5P_APLL_CON0);
+
+	/* 4. wait_lock_time */
+	do {
+		tmp = __raw_readl(S5P_APLL_CON0);
+	} while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT)));
+
+	/* 5. MUX_CORE_SEL = APLL */
+	clk_set_parent(moutcore, mout_apll);
+
+	do {
+		tmp = __raw_readl(S5P_CLKMUX_STATCPU);
+		tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK;
+	} while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT));
+}
+
+static void s5pv310_set_frequency(unsigned int old_index, unsigned int new_index)
+{
+	unsigned int tmp;
+
+	if (old_index > new_index) {
+		/* The frequency changing to L0 needs to change apll */
+		if (freqs.new == s5pv310_freq_table[L0].frequency) {
+			/* 1. Change the system clock divider values */
+			s5pv310_set_clkdiv(new_index);
+
+			/* 2. Change the apll m,p,s value */
+			s5pv310_set_apll(new_index);
+		} else {
+			/* 1. Change the system clock divider values */
+			s5pv310_set_clkdiv(new_index);
+
+			/* 2. Change just s value in apll m,p,s value */
+			tmp = __raw_readl(S5P_APLL_CON0);
+			tmp &= ~(0x7 << 0);
+			tmp |= (s5pv310_apll_pms_table[new_index] & 0x7);
+			__raw_writel(tmp, S5P_APLL_CON0);
+		}
+	}
+
+	else if (old_index < new_index) {
+		/* The frequency changing from L0 needs to change apll */
+		if (freqs.old == s5pv310_freq_table[L0].frequency) {
+			/* 1. Change the apll m,p,s value */
+			s5pv310_set_apll(new_index);
+
+			/* 2. Change the system clock divider values */
+			s5pv310_set_clkdiv(new_index);
+		} else {
+			/* 1. Change just s value in apll m,p,s value */
+			tmp = __raw_readl(S5P_APLL_CON0);
+			tmp &= ~(0x7 << 0);
+			tmp |= (s5pv310_apll_pms_table[new_index] & 0x7);
+			__raw_writel(tmp, S5P_APLL_CON0);
+
+			/* 2. Change the system clock divider values */
+			s5pv310_set_clkdiv(new_index);
+		}
+	}
+}
+
+static int s5pv310_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq,
+			  unsigned int relation)
+{
+	unsigned int index, old_index;
+	unsigned int arm_volt, int_volt;
+
+	freqs.old = s5pv310_getspeed(policy->cpu);
+
+	if (cpufreq_frequency_table_target(policy, s5pv310_freq_table,
+					   freqs.old, relation, &old_index))
+		return -EINVAL;
+
+	if (cpufreq_frequency_table_target(policy, s5pv310_freq_table,
+					   target_freq, relation, &index))
+		return -EINVAL;
+
+	freqs.new = s5pv310_freq_table[index].frequency;
+	freqs.cpu = policy->cpu;
+
+	if (freqs.new == freqs.old)
+		return 0;
+
+	/* get the voltage value */
+	arm_volt = s5pv310_volt_table[index].arm_volt;
+	int_volt = s5pv310_volt_table[index].int_volt;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* control regulator */
+	if (freqs.new > freqs.old) {
+		/* Voltage up */
+#ifdef CONFIG_REGULATOR
+		regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
+		regulator_set_voltage(int_regulator, int_volt, int_volt);
+#endif
+	}
+
+	/* Clock Configuration Procedure */
+	s5pv310_set_frequency(old_index, index);
+
+	/* control regulator */
+	if (freqs.new < freqs.old) {
+		/* Voltage down */
+#ifdef CONFIG_REGULATOR
+		regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
+		regulator_set_voltage(int_regulator, int_volt, int_volt);
+#endif
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy,
+				   pm_message_t pmsg)
+{
+	return 0;
+}
+
+static int s5pv310_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+#endif
+
+static int s5pv310_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	policy->cur = policy->min = policy->max = s5pv310_getspeed(policy->cpu);
+
+	cpufreq_frequency_table_get_attr(s5pv310_freq_table, policy->cpu);
+
+	/* set the transition latency value */
+	policy->cpuinfo.transition_latency = 100000;
+
+	/*
+	 * S5PV310 multi-core processors has 2 cores
+	 * that the frequency cannot be set independently.
+	 * Each cpu is bound to the same speed.
+	 * So the affected cpu is all of the cpus.
+	 */
+	cpumask_setall(policy->cpus);
+
+	return cpufreq_frequency_table_cpuinfo(policy, s5pv310_freq_table);
+}
+
+static struct cpufreq_driver s5pv310_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s5pv310_verify_speed,
+	.target		= s5pv310_target,
+	.get		= s5pv310_getspeed,
+	.init		= s5pv310_cpufreq_cpu_init,
+	.name		= "s5pv310_cpufreq",
+#ifdef CONFIG_PM
+	.suspend	= s5pv310_cpufreq_suspend,
+	.resume		= s5pv310_cpufreq_resume,
+#endif
+};
+
+static int __init s5pv310_cpufreq_init(void)
+{
+	cpu_clk = clk_get(NULL, "armclk");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	moutcore = clk_get(NULL, "moutcore");
+	if (IS_ERR(moutcore))
+		goto out;
+
+	mout_mpll = clk_get(NULL, "mout_mpll");
+	if (IS_ERR(mout_mpll))
+		goto out;
+
+	mout_apll = clk_get(NULL, "mout_apll");
+	if (IS_ERR(mout_apll))
+		goto out;
+
+#ifdef CONFIG_REGULATOR
+	arm_regulator = regulator_get(NULL, "vdd_arm");
+	if (IS_ERR(arm_regulator)) {
+		printk(KERN_ERR "failed to get resource %s\n", "vdd_arm");
+		goto out;
+	}
+
+	int_regulator = regulator_get(NULL, "vdd_int");
+	if (IS_ERR(int_regulator)) {
+		printk(KERN_ERR "failed to get resource %s\n", "vdd_int");
+		goto out;
+	}
+#endif
+
+	/*
+	 * Check DRAM type.
+	 * Because DVFS level is different according to DRAM type.
+	 */
+	memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET);
+	memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT);
+	memtype &= S5P_DMC0_MEMTYPE_MASK;
+
+	if ((memtype < DDR2) && (memtype > DDR3)) {
+		printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype);
+		goto out;
+	} else {
+		printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
+	}
+
+	return cpufreq_register_driver(&s5pv310_driver);
+
+out:
+	if (!IS_ERR(cpu_clk))
+		clk_put(cpu_clk);
+
+	if (!IS_ERR(moutcore))
+		clk_put(moutcore);
+
+	if (!IS_ERR(mout_mpll))
+		clk_put(mout_mpll);
+
+	if (!IS_ERR(mout_apll))
+		clk_put(mout_apll);
+
+#ifdef CONFIG_REGULATOR
+	if (!IS_ERR(arm_regulator))
+		regulator_put(arm_regulator);
+
+	if (!IS_ERR(int_regulator))
+		regulator_put(int_regulator);
+#endif
+
+	printk(KERN_ERR "%s: failed initialization\n", __func__);
+
+	return -EINVAL;
+}
+late_initcall(s5pv310_cpufreq_init);

arch/arm/mach-s5pv310/dev-audio.c

+/* linux/arch/arm/mach-s5pv310/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static const char *rclksrc[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
+static int s5pv310_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2));
+		break;
+	case 1:
+		s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2));
+		break;
+	case 2:
+		s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4));
+		break;
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata i2sv5_pdata = {
+	.cfg_gpio = s5pv310_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc,
+		},
+	},
+};
+
+static struct resource s5pv310_i2s0_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_I2S0,
+		.end	= S5PV310_PA_I2S0 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S0_TX,
+		.end	= DMACH_I2S0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S0_RX,
+		.end	= DMACH_I2S0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DMACH_I2S0S_TX,
+		.end	= DMACH_I2S0S_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_i2s0 = {
+	.name = "samsung-i2s",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(s5pv310_i2s0_resource),
+	.resource = s5pv310_i2s0_resource,
+	.dev = {
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "sclk_i2s",
+	[1] = "no_such_clock",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pv310_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_NO_MUXPSR,
+			.src_clk = rclksrc_v3,
+		},
+	},
+};
+
+static struct resource s5pv310_i2s1_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_I2S1,
+		.end	= S5PV310_PA_I2S1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S1_TX,
+		.end	= DMACH_I2S1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S1_RX,
+		.end	= DMACH_I2S1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_i2s1 = {
+	.name = "samsung-i2s",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(s5pv310_i2s1_resource),
+	.resource = s5pv310_i2s1_resource,
+	.dev = {
+		.platform_data = &i2sv3_pdata,
+	},
+};
+
+static struct resource s5pv310_i2s2_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_I2S2,
+		.end	= S5PV310_PA_I2S2 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S2_TX,
+		.end	= DMACH_I2S2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S2_RX,
+		.end	= DMACH_I2S2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_i2s2 = {
+	.name = "samsung-i2s",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(s5pv310_i2s2_resource),
+	.resource = s5pv310_i2s2_resource,
+	.dev = {
+		.platform_data = &i2sv3_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3));
+		break;
+	case 1:
+		s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3));
+		break;
+	case 2:
+		s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3));
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5pv310_pcm_cfg_gpio,
+};
+
+static struct resource s5pv310_pcm0_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PCM0,
+		.end	= S5PV310_PA_PCM0 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM0_TX,
+		.end	= DMACH_PCM0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM0_RX,
+		.end	= DMACH_PCM0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm0 = {
+	.name = "samsung-pcm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(s5pv310_pcm0_resource),
+	.resource = s5pv310_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv310_pcm1_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PCM1,
+		.end	= S5PV310_PA_PCM1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM1_TX,
+		.end	= DMACH_PCM1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM1_RX,
+		.end	= DMACH_PCM1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm1 = {
+	.name = "samsung-pcm",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(s5pv310_pcm1_resource),
+	.resource = s5pv310_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv310_pcm2_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PCM2,
+		.end	= S5PV310_PA_PCM2 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM2_TX,
+		.end	= DMACH_PCM2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM2_RX,
+		.end	= DMACH_PCM2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm2 = {
+	.name = "samsung-pcm",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(s5pv310_pcm2_resource),
+	.resource = s5pv310_pcm2_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev)
+{
+	return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4));
+}
+
+static struct resource s5pv310_ac97_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_AC97,
+		.end	= S5PV310_PA_AC97 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_AC97_PCMOUT,
+		.end	= DMACH_AC97_PCMOUT,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_AC97_PCMIN,
+		.end	= DMACH_AC97_PCMIN,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DMACH_AC97_MICIN,
+		.end	= DMACH_AC97_MICIN,
+		.flags	= IORESOURCE_DMA,
+	},
+	[4] = {
+		.start	= IRQ_AC97,
+		.end	= IRQ_AC97,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.cfg_gpio = s5pv310_ac97_cfg_gpio,
+};
+
+static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_ac97 = {
+	.name = "samsung-ac97",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(s5pv310_ac97_resource),
+	.resource = s5pv310_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s5pv310_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+/* S/PDIF Controller platform_device */
+
+static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static struct resource s5pv310_spdif_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_SPDIF,
+		.end	= S5PV310_PA_SPDIF + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPDIF,
+		.end	= DMACH_SPDIF,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+	.cfg_gpio = s5pv310_spdif_cfg_gpio,
+};
+
+static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_spdif = {
+	.name = "samsung-spdif",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(s5pv310_spdif_resource),
+	.resource = s5pv310_spdif_resource,
+	.dev = {
+		.platform_data = &samsung_spdif_pdata,
+		.dma_mask = &s5pv310_spdif_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};

arch/arm/mach-s5pv310/dev-pd.c

+/* linux/arch/arm/mach-s5pv310/dev-pd.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - Power Domain support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <mach/regs-pmu.h>
+
+#include <plat/pd.h>
+
+static int s5pv310_pd_enable(struct device *dev)
+{
+	struct samsung_pd_info *pdata =  dev->platform_data;
+	u32 timeout;
+
+	__raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base);
+
+	/* Wait max 1ms */
+	timeout = 10;
+	while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN)
+		!= S5P_INT_LOCAL_PWR_EN) {
+		if (timeout == 0) {
+			printk(KERN_ERR "Power domain %s enable failed.\n",
+				dev_name(dev));
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		udelay(100);
+	}
+
+	return 0;
+}
+
+static int s5pv310_pd_disable(struct device *dev)
+{
+	struct samsung_pd_info *pdata =  dev->platform_data;
+	u32 timeout;
+
+	__raw_writel(0, pdata->base);
+
+	/* Wait max 1ms */
+	timeout = 10;
+	while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) {
+		if (timeout == 0) {
+			printk(KERN_ERR "Power domain %s disable failed.\n",
+				dev_name(dev));
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		udelay(100);
+	}
+
+	return 0;
+}
+
+struct platform_device s5pv310_device_pd[] = {
+	{
+		.name		= "samsung-pd",
+		.id		= 0,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_MFC_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 1,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_G3D_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 2,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_LCD0_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 3,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_LCD1_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 4,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_TV_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 5,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_CAM_CONF,
+			},
+		},
+	}, {
+		.name		= "samsung-pd",
+		.id		= 6,
+		.dev = {
+			.platform_data = &(struct samsung_pd_info) {
+				.enable		= s5pv310_pd_enable,
+				.disable	= s5pv310_pd_disable,
+				.base		= S5P_PMU_GPS_CONF,
+			},
+		},
+	},
+};

arch/arm/mach-s5pv310/dev-sysmmu.c

+/* linux/arch/arm/mach-s5pv310/dev-sysmmu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+static struct resource s5pv310_sysmmu_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_SYSMMU_MDMA,
+		.end	= S5PV310_PA_SYSMMU_MDMA + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SYSMMU_MDMA0_0,
+		.end	= IRQ_SYSMMU_MDMA0_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= S5PV310_PA_SYSMMU_SSS,
+		.end	= S5PV310_PA_SYSMMU_SSS + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start	= IRQ_SYSMMU_SSS_0,
+		.end	= IRQ_SYSMMU_SSS_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[4] = {
+		.start	= S5PV310_PA_SYSMMU_FIMC0,
+		.end	= S5PV310_PA_SYSMMU_FIMC0 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[5] = {
+		.start	= IRQ_SYSMMU_FIMC0_0,
+		.end	= IRQ_SYSMMU_FIMC0_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[6] = {
+		.start	= S5PV310_PA_SYSMMU_FIMC1,
+		.end	= S5PV310_PA_SYSMMU_FIMC1 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[7] = {
+		.start	= IRQ_SYSMMU_FIMC1_0,
+		.end	= IRQ_SYSMMU_FIMC1_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[8] = {
+		.start	= S5PV310_PA_SYSMMU_FIMC2,
+		.end	= S5PV310_PA_SYSMMU_FIMC2 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[9] = {
+		.start	= IRQ_SYSMMU_FIMC2_0,
+		.end	= IRQ_SYSMMU_FIMC2_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[10] = {
+		.start	= S5PV310_PA_SYSMMU_FIMC3,
+		.end	= S5PV310_PA_SYSMMU_FIMC3 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[11] = {
+		.start	= IRQ_SYSMMU_FIMC3_0,
+		.end	= IRQ_SYSMMU_FIMC3_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[12] = {
+		.start	= S5PV310_PA_SYSMMU_JPEG,
+		.end	= S5PV310_PA_SYSMMU_JPEG + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[13] = {
+		.start	= IRQ_SYSMMU_JPEG_0,
+		.end	= IRQ_SYSMMU_JPEG_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[14] = {
+		.start	= S5PV310_PA_SYSMMU_FIMD0,
+		.end	= S5PV310_PA_SYSMMU_FIMD0 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[15] = {
+		.start	= IRQ_SYSMMU_LCD0_M0_0,
+		.end	= IRQ_SYSMMU_LCD0_M0_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[16] = {
+		.start	= S5PV310_PA_SYSMMU_FIMD1,
+		.end	= S5PV310_PA_SYSMMU_FIMD1 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[17] = {
+		.start	= IRQ_SYSMMU_LCD1_M1_0,
+		.end	= IRQ_SYSMMU_LCD1_M1_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[18] = {
+		.start	= S5PV310_PA_SYSMMU_PCIe,
+		.end	= S5PV310_PA_SYSMMU_PCIe + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[19] = {
+		.start	= IRQ_SYSMMU_PCIE_0,
+		.end	= IRQ_SYSMMU_PCIE_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[20] = {
+		.start	= S5PV310_PA_SYSMMU_G2D,
+		.end	= S5PV310_PA_SYSMMU_G2D + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[21] = {
+		.start	= IRQ_SYSMMU_2D_0,
+		.end	= IRQ_SYSMMU_2D_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[22] = {
+		.start	= S5PV310_PA_SYSMMU_ROTATOR,
+		.end	= S5PV310_PA_SYSMMU_ROTATOR + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[23] = {
+		.start	= IRQ_SYSMMU_ROTATOR_0,
+		.end	= IRQ_SYSMMU_ROTATOR_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[24] = {
+		.start	= S5PV310_PA_SYSMMU_MDMA2,
+		.end	= S5PV310_PA_SYSMMU_MDMA2 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[25] = {
+		.start	= IRQ_SYSMMU_MDMA1_0,
+		.end	= IRQ_SYSMMU_MDMA1_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[26] = {
+		.start	= S5PV310_PA_SYSMMU_TV,
+		.end	= S5PV310_PA_SYSMMU_TV + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[27] = {
+		.start	= IRQ_SYSMMU_TV_M0_0,
+		.end	= IRQ_SYSMMU_TV_M0_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[28] = {
+		.start	= S5PV310_PA_SYSMMU_MFC_L,
+		.end	= S5PV310_PA_SYSMMU_MFC_L + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[29] = {
+		.start	= IRQ_SYSMMU_MFC_M0_0,
+		.end	= IRQ_SYSMMU_MFC_M0_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[30] = {
+		.start	= S5PV310_PA_SYSMMU_MFC_R,
+		.end	= S5PV310_PA_SYSMMU_MFC_R + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[31] = {
+		.start	= IRQ_SYSMMU_MFC_M1_0,
+		.end	= IRQ_SYSMMU_MFC_M1_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5pv310_device_sysmmu = {
+	.name		= "s5p-sysmmu",
+	.id		= 32,
+	.num_resources	= ARRAY_SIZE(s5pv310_sysmmu_resource),
+	.resource	= s5pv310_sysmmu_resource,
+};
+
+EXPORT_SYMBOL(s5pv310_device_sysmmu);

arch/arm/mach-s5pv310/dma.c

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pv310_pdma0_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PDMA0,
+		.end	= S5PV310_PA_PDMA0 + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA0,
+		.end	= IRQ_PDMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv310_pdma0_pdata = {
+	.peri = {
+		[0] = DMACH_PCM0_RX,
+		[1] = DMACH_PCM0_TX,
+		[2] = DMACH_PCM2_RX,
+		[3] = DMACH_PCM2_TX,
+		[4] = DMACH_MSM_REQ0,
+		[5] = DMACH_MSM_REQ2,
+		[6] = DMACH_SPI0_RX,
+		[7] = DMACH_SPI0_TX,
+		[8] = DMACH_SPI2_RX,
+		[9] = DMACH_SPI2_TX,
+		[10] = DMACH_I2S0S_TX,
+		[11] = DMACH_I2S0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S2_RX,
+		[14] = DMACH_I2S2_TX,
+		[15] = DMACH_UART0_RX,
+		[16] = DMACH_UART0_TX,
+		[17] = DMACH_UART2_RX,
+		[18] = DMACH_UART2_TX,
+		[19] = DMACH_UART4_RX,
+		[20] = DMACH_UART4_TX,
+		[21] = DMACH_SLIMBUS0_RX,
+		[22] = DMACH_SLIMBUS0_TX,
+		[23] = DMACH_SLIMBUS2_RX,
+		[24] = DMACH_SLIMBUS2_TX,
+		[25] = DMACH_SLIMBUS4_RX,
+		[26] = DMACH_SLIMBUS4_TX,
+		[27] = DMACH_AC97_MICIN,
+		[28] = DMACH_AC97_PCMIN,
+		[29] = DMACH_AC97_PCMOUT,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pv310_device_pdma0 = {
+	.name		= "s3c-pl330",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5pv310_pdma0_resource),
+	.resource	= s5pv310_pdma0_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv310_pdma0_pdata,
+	},
+};
+
+static struct resource s5pv310_pdma1_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PDMA1,
+		.end	= S5PV310_PA_PDMA1 + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA1,
+		.end	= IRQ_PDMA1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv310_pdma1_pdata = {
+	.peri = {
+		[0] = DMACH_PCM0_RX,
+		[1] = DMACH_PCM0_TX,
+		[2] = DMACH_PCM1_RX,
+		[3] = DMACH_PCM1_TX,
+		[4] = DMACH_MSM_REQ1,
+		[5] = DMACH_MSM_REQ3,
+		[6] = DMACH_SPI1_RX,
+		[7] = DMACH_SPI1_TX,
+		[8] = DMACH_I2S0S_TX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S1_RX,
+		[12] = DMACH_I2S1_TX,
+		[13] = DMACH_UART0_RX,
+		[14] = DMACH_UART0_TX,
+		[15] = DMACH_UART1_RX,
+		[16] = DMACH_UART1_TX,
+		[17] = DMACH_UART3_RX,
+		[18] = DMACH_UART3_TX,
+		[19] = DMACH_SLIMBUS1_RX,
+		[20] = DMACH_SLIMBUS1_TX,
+		[21] = DMACH_SLIMBUS3_RX,
+		[22] = DMACH_SLIMBUS3_TX,
+		[23] = DMACH_SLIMBUS5_RX,
+		[24] = DMACH_SLIMBUS5_TX,
+		[25] = DMACH_SLIMBUS0AUX_RX,
+		[26] = DMACH_SLIMBUS0AUX_TX,
+		[27] = DMACH_SPDIF,
+		[28] = DMACH_MAX,
+		[29] = DMACH_MAX,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pv310_device_pdma1 = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5pv310_pdma1_resource),
+	.resource	= s5pv310_pdma1_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv310_pdma1_pdata,
+	},
+};
+
+static struct platform_device *s5pv310_dmacs[] __initdata = {
+	&s5pv310_device_pdma0,
+	&s5pv310_device_pdma1,
+};
+
+static int __init s5pv310_dma_init(void)
+{
+	platform_add_devices(s5pv310_dmacs, ARRAY_SIZE(s5pv310_dmacs));
+
+	return 0;
+}
+arch_initcall(s5pv310_dma_init);

arch/arm/mach-s5pv310/include/mach/dma.h

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */

arch/arm/mach-s5pv310/include/mach/irqs.h

@@ -25,6 +25,8 @@
 
 #define IRQ_SPI(x)		S5P_IRQ(x+32)
 
+#define IRQ_MCT1		IRQ_SPI(35)
+
 #define IRQ_EINT0		IRQ_SPI(40)
 #define IRQ_EINT1		IRQ_SPI(41)
 #define IRQ_EINT2		IRQ_SPI(42)
@@ -36,9 +38,8 @@
 #define IRQ_JPEG		IRQ_SPI(48)
 #define IRQ_2D			IRQ_SPI(49)
 #define IRQ_PCIE		IRQ_SPI(50)
-#define IRQ_SYSTEM_TIMER	IRQ_SPI(51)
+#define IRQ_MCT0		IRQ_SPI(51)
 #define IRQ_MFC			IRQ_SPI(52)
-#define IRQ_WDT			IRQ_SPI(53)
 #define IRQ_AUDIO_SS		IRQ_SPI(54)
 #define IRQ_AC97		IRQ_SPI(55)
 #define IRQ_SPDIF		IRQ_SPI(56)
@@ -54,6 +55,27 @@
 #define COMBINER_GROUP(x)	((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
 #define COMBINER_IRQ(x, y)	(COMBINER_GROUP(x) + y)
 
+#define IRQ_SYSMMU_MDMA0_0	COMBINER_IRQ(4, 0)
+#define IRQ_SYSMMU_SSS_0	COMBINER_IRQ(4, 1)
+#define IRQ_SYSMMU_FIMC0_0	COMBINER_IRQ(4, 2)
+#define IRQ_SYSMMU_FIMC1_0	COMBINER_IRQ(4, 3)
+#define IRQ_SYSMMU_FIMC2_0	COMBINER_IRQ(4, 4)
+#define IRQ_SYSMMU_FIMC3_0	COMBINER_IRQ(4, 5)
+#define IRQ_SYSMMU_JPEG_0	COMBINER_IRQ(4, 6)
+#define IRQ_SYSMMU_2D_0		COMBINER_IRQ(4, 7)
+
+#define IRQ_SYSMMU_ROTATOR_0	COMBINER_IRQ(5, 0)
+#define IRQ_SYSMMU_MDMA1_0	COMBINER_IRQ(5, 1)
+#define IRQ_SYSMMU_LCD0_M0_0	COMBINER_IRQ(5, 2)
+#define IRQ_SYSMMU_LCD1_M1_0	COMBINER_IRQ(5, 3)
+#define IRQ_SYSMMU_TV_M0_0	COMBINER_IRQ(5, 4)
+#define IRQ_SYSMMU_MFC_M0_0	COMBINER_IRQ(5, 5)
+#define IRQ_SYSMMU_MFC_M1_0	COMBINER_IRQ(5, 6)
+#define IRQ_SYSMMU_PCIE_0	COMBINER_IRQ(5, 7)
+
+#define IRQ_PDMA0		COMBINER_IRQ(21, 0)
+#define IRQ_PDMA1		COMBINER_IRQ(21, 1)
+
 #define IRQ_TIMER0_VIC		COMBINER_IRQ(22, 0)
 #define IRQ_TIMER1_VIC		COMBINER_IRQ(22, 1)
 #define IRQ_TIMER2_VIC		COMBINER_IRQ(22, 2)
@@ -83,8 +105,13 @@
 #define IRQ_HSMMC2		COMBINER_IRQ(29, 2)
 #define IRQ_HSMMC3		COMBINER_IRQ(29, 3)
 
+#define IRQ_MIPI_CSIS0		COMBINER_IRQ(30, 0)
+#define IRQ_MIPI_CSIS1		COMBINER_IRQ(30, 1)
+
 #define IRQ_ONENAND_AUDI	COMBINER_IRQ(34, 0)
 
+#define IRQ_MCT_L1		COMBINER_IRQ(35, 3)
+
 #define IRQ_EINT4		COMBINER_IRQ(37, 0)
 #define IRQ_EINT5		COMBINER_IRQ(37, 1)
 #define IRQ_EINT6		COMBINER_IRQ(37, 2)
@@ -101,7 +128,11 @@
 
 #define IRQ_EINT16_31		COMBINER_IRQ(39, 0)
 
-#define MAX_COMBINER_NR		40
+#define IRQ_MCT_L0		COMBINER_IRQ(51, 0)
+
+#define IRQ_WDT			COMBINER_IRQ(53, 0)
+
+#define MAX_COMBINER_NR		54
 
 #define S5P_IRQ_EINT_BASE	COMBINER_IRQ(MAX_COMBINER_NR, 0)
 

arch/arm/mach-s5pv310/include/mach/map.h

@@ -39,11 +39,15 @@
 #define S5PV310_PA_SYSCON		(0x10010000)
 #define S5P_PA_SYSCON			S5PV310_PA_SYSCON
 
+#define S5PV310_PA_PMU			(0x10020000)
+
 #define S5PV310_PA_CMU			(0x10030000)
 
 #define S5PV310_PA_WATCHDOG		(0x10060000)
 #define S5PV310_PA_RTC			(0x10070000)
 
+#define S5PV310_PA_DMC0			(0x10400000)
+
 #define S5PV310_PA_COMBINER		(0x10448000)
 
 #define S5PV310_PA_COREPERI		(0x10500000)
@@ -52,13 +56,38 @@
 #define S5PV310_PA_GIC_DIST		(0x10501000)
 #define S5PV310_PA_L2CC			(0x10502000)
 
+/* DMA */
+#define S5PV310_PA_MDMA		0x10810000
+#define S5PV310_PA_PDMA0	0x12680000
+#define S5PV310_PA_PDMA1	0x12690000
+
 #define S5PV310_PA_GPIO1		(0x11400000)
 #define S5PV310_PA_GPIO2		(0x11000000)
 #define S5PV310_PA_GPIO3		(0x03860000)
 
+#define S5PV310_PA_MIPI_CSIS0		0x11880000
+#define S5PV310_PA_MIPI_CSIS1		0x11890000
+
 #define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 
 #define S5PV310_PA_SROMC		(0x12570000)
+#define S5P_PA_SROMC			S5PV310_PA_SROMC
+
+/* S/PDIF */
+#define S5PV310_PA_SPDIF	0xE1100000
+
+/* I2S */
+#define S5PV310_PA_I2S0		0x03830000
+#define S5PV310_PA_I2S1		0xE3100000
+#define S5PV310_PA_I2S2		0xE2A00000
+
+/* PCM */
+#define S5PV310_PA_PCM0		0x03840000
+#define S5PV310_PA_PCM1		0x13980000
+#define S5PV310_PA_PCM2		0x13990000
+
+/* AC97 */
+#define S5PV310_PA_AC97		0x139A0000
 
 #define S5PV310_PA_UART			(0x13800000)
 
@@ -79,6 +108,25 @@
 #define S5PV310_PA_SDRAM		(0x40000000)
 #define S5P_PA_SDRAM			S5PV310_PA_SDRAM
 
+#define S5PV310_PA_SYSMMU_MDMA		0x10A40000
+#define S5PV310_PA_SYSMMU_SSS		0x10A50000
+#define S5PV310_PA_SYSMMU_FIMC0		0x11A20000
+#define S5PV310_PA_SYSMMU_FIMC1		0x11A30000
+#define S5PV310_PA_SYSMMU_FIMC2		0x11A40000
+#define S5PV310_PA_SYSMMU_FIMC3		0x11A50000
+#define S5PV310_PA_SYSMMU_JPEG		0x11A60000
+#define S5PV310_PA_SYSMMU_FIMD0		0x11E20000
+#define S5PV310_PA_SYSMMU_FIMD1		0x12220000
+#define S5PV310_PA_SYSMMU_PCIe		0x12620000
+#define S5PV310_PA_SYSMMU_G2D		0x12A20000
+#define S5PV310_PA_SYSMMU_ROTATOR	0x12A30000
+#define S5PV310_PA_SYSMMU_MDMA2		0x12A40000
+#define S5PV310_PA_SYSMMU_TV		0x12E20000
+#define S5PV310_PA_SYSMMU_MFC_L		0x13620000
+#define S5PV310_PA_SYSMMU_MFC_R		0x13630000
+#define S5PV310_SYSMMU_TOTAL_IPNUM	16
+#define S5P_SYSMMU_TOTAL_IPNUM		S5PV310_SYSMMU_TOTAL_IPNUM
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART			S5PV310_PA_UART
 #define S3C_PA_HSMMC0			S5PV310_PA_HSMMC(0)
@@ -95,5 +143,7 @@
 #define S3C_PA_IIC7			S5PV310_PA_IIC(7)
 #define S3C_PA_RTC			S5PV310_PA_RTC
 #define S3C_PA_WDT			S5PV310_PA_WATCHDOG
+#define S5P_PA_MIPI_CSIS0		S5PV310_PA_MIPI_CSIS0
+#define S5P_PA_MIPI_CSIS1		S5PV310_PA_MIPI_CSIS1
 
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s5pv310/include/mach/regs-clock.h

@@ -19,6 +19,12 @@
 
 #define S5P_INFORM0			S5P_CLKREG(0x800)
 
+#define S5P_CLKDIV_LEFTBUS		S5P_CLKREG(0x04500)
+#define S5P_CLKDIV_STAT_LEFTBUS		S5P_CLKREG(0x04600)
+
+#define S5P_CLKDIV_RIGHTBUS		S5P_CLKREG(0x08500)
+#define S5P_CLKDIV_STAT_RIGHTBUS	S5P_CLKREG(0x08600)
+
 #define S5P_EPLL_CON0			S5P_CLKREG(0x0C110)
 #define S5P_EPLL_CON1			S5P_CLKREG(0x0C114)
 #define S5P_VPLL_CON0			S5P_CLKREG(0x0C120)
@@ -58,6 +64,8 @@
 #define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
 #define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
 
+#define S5P_CLKDIV_STAT_TOP		S5P_CLKREG(0x0C610)
+
 #define S5P_CLKGATE_IP_CAM		S5P_CLKREG(0x0C920)
 #define S5P_CLKGATE_IP_IMAGE		S5P_CLKREG(0x0C930)
 #define S5P_CLKGATE_IP_LCD0		S5P_CLKREG(0x0C934)
@@ -66,8 +74,9 @@
 #define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x0C950)
 #define S5P_CLKGATE_IP_PERIR		S5P_CLKREG(0x0C960)
 
-#define S5P_CLKSRC_CORE			S5P_CLKREG(0x10200)
-#define S5P_CLKDIV_CORE0		S5P_CLKREG(0x10500)
+#define S5P_CLKSRC_DMC			S5P_CLKREG(0x10200)
+#define S5P_CLKDIV_DMC0			S5P_CLKREG(0x10500)
+#define S5P_CLKDIV_STAT_DMC0		S5P_CLKREG(0x10600)
 
 #define S5P_APLL_LOCK			S5P_CLKREG(0x14000)
 #define S5P_MPLL_LOCK			S5P_CLKREG(0x14004)
@@ -80,10 +89,77 @@
 #define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x14400)
 
 #define S5P_CLKDIV_CPU			S5P_CLKREG(0x14500)
+#define S5P_CLKDIV_CPU1			S5P_CLKREG(0x14504)
 #define S5P_CLKDIV_STATCPU		S5P_CLKREG(0x14600)
+#define S5P_CLKDIV_STATCPU1		S5P_CLKREG(0x14604)
 
 #define S5P_CLKGATE_SCLKCPU		S5P_CLKREG(0x14800)
 
+/* APLL_LOCK */
+#define S5P_APLL_LOCKTIME		(0x1C20)	/* 300us */
+
+/* APLL_CON0 */
+#define S5P_APLLCON0_ENABLE_SHIFT	(31)
+#define S5P_APLLCON0_LOCKED_SHIFT	(29)
+#define S5P_APLL_VAL_1000		((250 << 16) | (6 << 8) | 1)
+#define S5P_APLL_VAL_800		((200 << 16) | (6 << 8) | 1)
+
+/* CLK_SRC_CPU */
+#define S5P_CLKSRC_CPU_MUXCORE_SHIFT	(16)
+#define S5P_CLKMUX_STATCPU_MUXCORE_MASK	(0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
+
+/* CLKDIV_CPU0 */
+#define S5P_CLKDIV_CPU0_CORE_SHIFT	(0)
+#define S5P_CLKDIV_CPU0_CORE_MASK	(0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT)
+#define S5P_CLKDIV_CPU0_COREM0_SHIFT	(4)
+#define S5P_CLKDIV_CPU0_COREM0_MASK	(0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT)
+#define S5P_CLKDIV_CPU0_COREM1_SHIFT	(8)
+#define S5P_CLKDIV_CPU0_COREM1_MASK	(0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT)
+#define S5P_CLKDIV_CPU0_PERIPH_SHIFT	(12)
+#define S5P_CLKDIV_CPU0_PERIPH_MASK	(0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT)
+#define S5P_CLKDIV_CPU0_ATB_SHIFT	(16)
+#define S5P_CLKDIV_CPU0_ATB_MASK	(0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT)
+#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT	(20)
+#define S5P_CLKDIV_CPU0_PCLKDBG_MASK	(0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT)
+#define S5P_CLKDIV_CPU0_APLL_SHIFT	(24)
+#define S5P_CLKDIV_CPU0_APLL_MASK	(0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT)
+
+/* CLKDIV_DMC0 */
+#define S5P_CLKDIV_DMC0_ACP_SHIFT	(0)
+#define S5P_CLKDIV_DMC0_ACP_MASK	(0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT)
+#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT	(4)
+#define S5P_CLKDIV_DMC0_ACPPCLK_MASK	(0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT)
+#define S5P_CLKDIV_DMC0_DPHY_SHIFT	(8)
+#define S5P_CLKDIV_DMC0_DPHY_MASK	(0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT)
+#define S5P_CLKDIV_DMC0_DMC_SHIFT	(12)
+#define S5P_CLKDIV_DMC0_DMC_MASK	(0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT)
+#define S5P_CLKDIV_DMC0_DMCD_SHIFT	(16)
+#define S5P_CLKDIV_DMC0_DMCD_MASK	(0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT)
+#define S5P_CLKDIV_DMC0_DMCP_SHIFT	(20)
+#define S5P_CLKDIV_DMC0_DMCP_MASK	(0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT)
+#define S5P_CLKDIV_DMC0_COPY2_SHIFT	(24)
+#define S5P_CLKDIV_DMC0_COPY2_MASK	(0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT)
+#define S5P_CLKDIV_DMC0_CORETI_SHIFT	(28)
+#define S5P_CLKDIV_DMC0_CORETI_MASK	(0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT)
+
+/* CLKDIV_TOP */
+#define S5P_CLKDIV_TOP_ACLK200_SHIFT	(0)
+#define S5P_CLKDIV_TOP_ACLK200_MASK	(0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT)
+#define S5P_CLKDIV_TOP_ACLK100_SHIFT	(4)
+#define S5P_CLKDIV_TOP_ACLK100_MASK	(0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT)
+#define S5P_CLKDIV_TOP_ACLK160_SHIFT	(8)
+#define S5P_CLKDIV_TOP_ACLK160_MASK	(0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT)
+#define S5P_CLKDIV_TOP_ACLK133_SHIFT	(12)
+#define S5P_CLKDIV_TOP_ACLK133_MASK	(0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT)
+#define S5P_CLKDIV_TOP_ONENAND_SHIFT	(16)
+#define S5P_CLKDIV_TOP_ONENAND_MASK	(0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT)
+
+/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/
+#define S5P_CLKDIV_BUS_GDLR_SHIFT	(0)
+#define S5P_CLKDIV_BUS_GDLR_MASK	(0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT)
+#define S5P_CLKDIV_BUS_GPLR_SHIFT	(4)
+#define S5P_CLKDIV_BUS_GPLR_MASK	(0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
+
 /* Compatibility defines */
 
 #define S5P_EPLL_CON			S5P_EPLL_CON0

arch/arm/mach-s5pv310/include/mach/regs-mem.h

+/* linux/arch/arm/mach-s5pv310/include/mach/regs-mem.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - SROMC and DMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_MEM_H
+#define __ASM_ARCH_REGS_MEM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_DMC0_MEMCON_OFFSET		0x04
+
+#define S5P_DMC0_MEMTYPE_SHIFT		8
+#define S5P_DMC0_MEMTYPE_MASK		0xF
+
+#endif /* __ASM_ARCH_REGS_MEM_H */

arch/arm/mach-s5pv310/include/mach/regs-pmu.h

+/* linux/arch/arm/mach-s5pv310/include/mach/regs-pmu.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - Power management unit definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_PMU_H
+#define __ASM_ARCH_REGS_PMU_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_PMUREG(x)			(S5P_VA_PMU + (x))
+
+#define S5P_PMU_CAM_CONF		S5P_PMUREG(0x3C00)
+#define S5P_PMU_TV_CONF		S5P_PMUREG(0x3C20)
+#define S5P_PMU_MFC_CONF		S5P_PMUREG(0x3C40)
+#define S5P_PMU_G3D_CONF		S5P_PMUREG(0x3C60)
+#define S5P_PMU_LCD0_CONF		S5P_PMUREG(0x3C80)
+#define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
+#define S5P_PMU_GPS_CONF		S5P_PMUREG(0x3CE0)
+
+#define S5P_INT_LOCAL_PWR_EN		0x7
+
+#endif /* __ASM_ARCH_REGS_PMU_H */

arch/arm/mach-s5pv310/include/mach/regs-srom.h

-/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PV310 - SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_SROM_H
-#define __ASM_ARCH_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PV310_SROMREG(x)	(S5P_VA_SROMC + (x))
-
-#define S5PV310_SROM_BW		S5PV310_SROMREG(0x0)
-#define S5PV310_SROM_BC0	S5PV310_SROMREG(0x4)
-#define S5PV310_SROM_BC1	S5PV310_SROMREG(0x8)
-#define S5PV310_SROM_BC2	S5PV310_SROMREG(0xc)
-#define S5PV310_SROM_BC3	S5PV310_SROMREG(0x10)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5PV310_SROM_BW__DATAWIDTH__SHIFT	0
-#define S5PV310_SROM_BW__ADDRMODE__SHIFT	1
-#define S5PV310_SROM_BW__WAITENABLE__SHIFT	2
-#define S5PV310_SROM_BW__BYTEENABLE__SHIFT	3
-
-#define S5PV310_SROM_BW__CS_MASK		0xf
-
-#define S5PV310_SROM_BW__NCS0__SHIFT		0
-#define S5PV310_SROM_BW__NCS1__SHIFT		4
-#define S5PV310_SROM_BW__NCS2__SHIFT		8
-#define S5PV310_SROM_BW__NCS3__SHIFT		12
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5PV310_SROM_BCX__PMC__SHIFT		0
-#define S5PV310_SROM_BCX__TACP__SHIFT		4
-#define S5PV310_SROM_BCX__TCAH__SHIFT		8
-#define S5PV310_SROM_BCX__TCOH__SHIFT		12
-#define S5PV310_SROM_BCX__TACC__SHIFT		16
-#define S5PV310_SROM_BCX__TCOS__SHIFT		24
-#define S5PV310_SROM_BCX__TACS__SHIFT		28
-
-#endif /* __ASM_ARCH_REGS_SROM_H */

arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h

+/* linux/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - System MMU register
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SYSMMU_H
+#define __ASM_ARCH_REGS_SYSMMU_H __FILE__
+
+#define S5P_MMU_CTRL			0x000
+#define S5P_MMU_CFG			0x004
+#define S5P_MMU_STATUS			0x008
+#define S5P_MMU_FLUSH			0x00C
+#define S5P_PT_BASE_ADDR		0x014
+#define S5P_INT_STATUS			0x018
+#define S5P_PAGE_FAULT_ADDR		0x024
+
+#endif /* __ASM_ARCH_REGS_SYSMMU_H */

arch/arm/mach-s5pv310/include/mach/sysmmu.h

+/* linux/arch/arm/mach-s5pv310/include/mach/sysmmu.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Samsung sysmmu driver for S5PV310
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_SYSMMU_H
+#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
+
+enum s5pv310_sysmmu_ips {
+	SYSMMU_MDMA,
+	SYSMMU_SSS,
+	SYSMMU_FIMC0,
+	SYSMMU_FIMC1,
+	SYSMMU_FIMC2,
+	SYSMMU_FIMC3,
+	SYSMMU_JPEG,
+	SYSMMU_FIMD0,
+	SYSMMU_FIMD1,
+	SYSMMU_PCIe,
+	SYSMMU_G2D,
+	SYSMMU_ROTATOR,
+	SYSMMU_MDMA2,
+	SYSMMU_TV,
+	SYSMMU_MFC_L,
+	SYSMMU_MFC_R,
+};
+
+static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = {
+	"SYSMMU_MDMA"	,
+	"SYSMMU_SSS"	,
+	"SYSMMU_FIMC0"	,
+	"SYSMMU_FIMC1"	,
+	"SYSMMU_FIMC2"	,
+	"SYSMMU_FIMC3"	,
+	"SYSMMU_JPEG"	,
+	"SYSMMU_FIMD0"	,
+	"SYSMMU_FIMD1"	,
+	"SYSMMU_PCIe"	,
+	"SYSMMU_G2D"	,
+	"SYSMMU_ROTATOR",
+	"SYSMMU_MDMA2"	,
+	"SYSMMU_TV"	,
+	"SYSMMU_MFC_L"	,
+	"SYSMMU_MFC_R"	,
+};
+
+typedef enum s5pv310_sysmmu_ips sysmmu_ips;
+
+struct sysmmu_tt_info {
+	unsigned long *pgd;
+	unsigned long pgd_paddr;
+	unsigned long *pte;
+};
+
+struct sysmmu_controller {
+	const char		*name;
+
+	/* channels registers */
+	void __iomem		*regs;
+
+	/* channel irq */
+	unsigned int		irq;
+
+	sysmmu_ips		ips;
+
+	/* Translation Table Info. */
+	struct sysmmu_tt_info	*tt_info;
+
+	struct resource		*mem;
+	struct device		*dev;
+
+	/* SysMMU controller enable - true : enable */
+	bool			enable;
+};
+
+/**
+ * s5p_sysmmu_enable() - enable system mmu of ip
+ * @ips: The ip connected system mmu.
+ *
+ * This function enable system mmu to transfer address
+ * from virtual address to physical address
+ */
+int s5p_sysmmu_enable(sysmmu_ips ips);
+
+/**
+ * s5p_sysmmu_disable() - disable sysmmu mmu of ip
+ * @ips: The ip connected system mmu.
+ *
+ * This function disable system mmu to transfer address
+ * from virtual address to physical address
+ */
+int s5p_sysmmu_disable(sysmmu_ips ips);
+
+/**
+ * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
+ * @ips: The ip connected system mmu.
+ * @pgd: The page table base address.
+ *
+ * This function set page table base address
+ * When system mmu transfer address from virtaul address to physical address,
+ * system mmu refer address information from page table
+ */
+int s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
+
+/**
+ * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
+ * @ips: The ip connected system mmu.
+ *
+ * This function flush all TLB entry in system mmu
+ */
+int s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
+#endif /* __ASM_ARM_ARCH_SYSMMU_H */

arch/arm/mach-s5pv310/irq-combiner.c

@@ -24,29 +24,32 @@ static DEFINE_SPINLOCK(irq_controller_lock);
 
 struct combiner_chip_data {
 	unsigned int irq_offset;
+	unsigned int irq_mask;
 	void __iomem *base;
 };
 
 static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
 
-static inline void __iomem *combiner_base(unsigned int irq)
+static inline void __iomem *combiner_base(struct irq_data *data)
 {
-	struct combiner_chip_data *combiner_data = get_irq_chip_data(irq);
+	struct combiner_chip_data *combiner_data =
+		irq_data_get_irq_chip_data(data);
+
 	return combiner_data->base;
 }
 
-static void combiner_mask_irq(unsigned int irq)
+static void combiner_mask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (irq % 32);
+	u32 mask = 1 << (data->irq % 32);
 
-	__raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_CLEAR);
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
 }
 
-static void combiner_unmask_irq(unsigned int irq)
+static void combiner_unmask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (irq % 32);
+	u32 mask = 1 << (data->irq % 32);
 
-	__raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_SET);
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
 }
 
 static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
@@ -57,11 +60,12 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	unsigned long status;
 
 	/* primary controller ack'ing */
-	chip->ack(irq);
+	chip->irq_ack(&desc->irq_data);
 
 	spin_lock(&irq_controller_lock);
 	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
 	spin_unlock(&irq_controller_lock);
+	status &= chip_data->irq_mask;
 
 	if (status == 0)
 		goto out;
@@ -76,13 +80,13 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 
  out:
 	/* primary controller unmasking */
-	chip->unmask(irq);
+	chip->irq_unmask(&desc->irq_data);
 }
 
 static struct irq_chip combiner_chip = {
 	.name		= "COMBINER",
-	.mask		= combiner_mask_irq,
-	.unmask		= combiner_unmask_irq,
+	.irq_mask	= combiner_mask_irq,
+	.irq_unmask	= combiner_unmask_irq,
 };
 
 void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
@@ -104,10 +108,12 @@ void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
 
 	combiner_data[combiner_nr].base = base;
 	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
 
 	/* Disable all interrupts */
 
-	__raw_writel(0xffffffff, base + COMBINER_ENABLE_CLEAR);
+	__raw_writel(combiner_data[combiner_nr].irq_mask,
+		     base + COMBINER_ENABLE_CLEAR);
 
 	/* Setup the Linux IRQ subsystem */
 

arch/arm/mach-s5pv310/irq-eint.c

@@ -48,42 +48,43 @@ static unsigned int s5pv310_get_irq_nr(unsigned int number)
 	return ret;
 }
 
-static inline void s5pv310_irq_eint_mask(unsigned int irq)
+static inline void s5pv310_irq_eint_mask(struct irq_data *data)
 {
 	u32 mask;
 
 	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
-	mask |= eint_irq_to_bit(irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask |= eint_irq_to_bit(data->irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
 	spin_unlock(&eint_lock);
 }
 
-static void s5pv310_irq_eint_unmask(unsigned int irq)
+static void s5pv310_irq_eint_unmask(struct irq_data *data)
 {
 	u32 mask;
 
 	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
-	mask &= ~(eint_irq_to_bit(irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask &= ~(eint_irq_to_bit(data->irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
 	spin_unlock(&eint_lock);
 }
 
-static inline void s5pv310_irq_eint_ack(unsigned int irq)
+static inline void s5pv310_irq_eint_ack(struct irq_data *data)
 {
-	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
 }
 
-static void s5pv310_irq_eint_maskack(unsigned int irq)
+static void s5pv310_irq_eint_maskack(struct irq_data *data)
 {
-	s5pv310_irq_eint_mask(irq);
-	s5pv310_irq_eint_ack(irq);
+	s5pv310_irq_eint_mask(data);
+	s5pv310_irq_eint_ack(data);
 }
 
-static int s5pv310_irq_eint_set_type(unsigned int irq, unsigned int type)
+static int s5pv310_irq_eint_set_type(struct irq_data *data, unsigned int type)
 {
-	int offs = EINT_OFFSET(irq);
+	int offs = EINT_OFFSET(data->irq);
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -118,10 +119,10 @@ static int s5pv310_irq_eint_set_type(unsigned int irq, unsigned int type)
 	mask = 0x7 << shift;
 
 	spin_lock(&eint_lock);
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
 	ctrl &= ~mask;
 	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
 	spin_unlock(&eint_lock);
 
 	switch (offs) {
@@ -146,13 +147,13 @@ static int s5pv310_irq_eint_set_type(unsigned int irq, unsigned int type)
 
 static struct irq_chip s5pv310_irq_eint = {
 	.name		= "s5pv310-eint",
-	.mask		= s5pv310_irq_eint_mask,
-	.unmask		= s5pv310_irq_eint_unmask,
-	.mask_ack	= s5pv310_irq_eint_maskack,
-	.ack		= s5pv310_irq_eint_ack,
-	.set_type	= s5pv310_irq_eint_set_type,
+	.irq_mask	= s5pv310_irq_eint_mask,
+	.irq_unmask	= s5pv310_irq_eint_unmask,
+	.irq_mask_ack	= s5pv310_irq_eint_maskack,
+	.irq_ack	= s5pv310_irq_eint_ack,
+	.irq_set_type	= s5pv310_irq_eint_set_type,
 #ifdef CONFIG_PM
-	.set_wake	= s3c_irqext_wake,
+	.irq_set_wake	= s3c_irqext_wake,
 #endif
 };
 
@@ -192,14 +193,14 @@ static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 	u32 *irq_data = get_irq_data(irq);
 	struct irq_chip *chip = get_irq_chip(irq);
 
-	chip->mask(irq);
+	chip->irq_mask(&desc->irq_data);
 
-	if (chip->ack)
-		chip->ack(irq);
+	if (chip->irq_ack)
+		chip->irq_ack(&desc->irq_data);
 
 	generic_handle_irq(*irq_data);
 
-	chip->unmask(irq);
+	chip->irq_unmask(&desc->irq_data);
 }
 
 int __init s5pv310_init_irq_eint(void)

arch/arm/mach-s5pv310/mach-smdkc210.c

@@ -14,18 +14,21 @@
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
 #include <plat/s5pv310.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
+#include <plat/iic.h>
+#include <plat/pd.h>
 
 #include <mach/map.h>
-#include <mach/regs-srom.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -139,14 +142,29 @@ static struct platform_device smdkc210_smsc911x = {
 	},
 };
 
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{I2C_BOARD_INFO("wm8994", 0x1a),},
+};
+
 static struct platform_device *smdkc210_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c1,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5pv310_device_ac97,
+	&s5pv310_device_i2s0,
+	&s5pv310_device_pd[PD_MFC],
+	&s5pv310_device_pd[PD_G3D],
+	&s5pv310_device_pd[PD_LCD0],
+	&s5pv310_device_pd[PD_LCD1],
+	&s5pv310_device_pd[PD_CAM],
+	&s5pv310_device_pd[PD_TV],
+	&s5pv310_device_pd[PD_GPS],
 	&smdkc210_smsc911x,
+	&s5pv310_device_sysmmu,
 };
 
 static void __init smdkc210_smsc911x_init(void)
@@ -154,23 +172,22 @@ static void __init smdkc210_smsc911x_init(void)
 	u32 cs1;
 
 	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5PV310_SROM_BW) &
-		    ~(S5PV310_SROM_BW__CS_MASK <<
-				    S5PV310_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5PV310_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5PV310_SROM_BW);
+	cs1 = __raw_readl(S5P_SROM_BW) &
+		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
+		S5P_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S5P_SROM_BW);
 
 	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
+		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
+		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
+		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
 }
 
 static void __init smdkc210_map_io(void)
@@ -182,6 +199,9 @@ static void __init smdkc210_map_io(void)
 
 static void __init smdkc210_machine_init(void)
 {
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
 	smdkc210_smsc911x_init();
 
 	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);

arch/arm/mach-s5pv310/mach-smdkv310.c

@@ -14,18 +14,21 @@
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
 #include <plat/s5pv310.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
+#include <plat/iic.h>
+#include <plat/pd.h>
 
 #include <mach/map.h>
-#include <mach/regs-srom.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -139,14 +142,29 @@ static struct platform_device smdkv310_smsc911x = {
 	},
 };
 
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{I2C_BOARD_INFO("wm8994", 0x1a),},
+};
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c1,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5pv310_device_ac97,
+	&s5pv310_device_i2s0,
+	&s5pv310_device_pd[PD_MFC],
+	&s5pv310_device_pd[PD_G3D],
+	&s5pv310_device_pd[PD_LCD0],
+	&s5pv310_device_pd[PD_LCD1],
+	&s5pv310_device_pd[PD_CAM],
+	&s5pv310_device_pd[PD_TV],
+	&s5pv310_device_pd[PD_GPS],
 	&smdkv310_smsc911x,
+	&s5pv310_device_sysmmu,
 };
 
 static void __init smdkv310_smsc911x_init(void)
@@ -154,23 +172,22 @@ static void __init smdkv310_smsc911x_init(void)
 	u32 cs1;
 
 	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5PV310_SROM_BW) &
-		    ~(S5PV310_SROM_BW__CS_MASK <<
-				    S5PV310_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5PV310_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5PV310_SROM_BW);
+	cs1 = __raw_readl(S5P_SROM_BW) &
+		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
+		S5P_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S5P_SROM_BW);
 
 	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
+		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
+		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
+		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
+		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
 }
 
 static void __init smdkv310_map_io(void)
@@ -182,6 +199,9 @@ static void __init smdkv310_map_io(void)
 
 static void __init smdkv310_machine_init(void)
 {
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
 	smdkv310_smsc911x_init();
 
 	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);

arch/arm/mach-s5pv310/mach-universal_c210.c

@@ -13,6 +13,9 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/mmc/host.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -21,6 +24,7 @@
 #include <plat/s5pv310.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/sdhci.h>
 
 #include <mach/map.h>
 
@@ -116,6 +120,73 @@ static struct platform_device universal_gpio_keys = {
 	},
 };
 
+/* eMMC */
+static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
+	.max_width		= 8,
+	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_DISABLE),
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply mmc0_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+};
+
+static struct regulator_init_data mmc0_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "VMEM_VDD_2.8V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(mmc0_supplies),
+	.consumer_supplies	= mmc0_supplies,
+};
+
+static struct fixed_voltage_config mmc0_fixed_voltage_config = {
+	.supply_name		= "MASSMEMORY_EN",
+	.microvolts		= 2800000,
+	.gpio			= S5PV310_GPE1(3),
+	.enable_high		= true,
+	.init_data		= &mmc0_fixed_voltage_init_data,
+};
+
+static struct platform_device mmc0_fixed_voltage = {
+	.name			= "reg-fixed-voltage",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &mmc0_fixed_voltage_config,
+	},
+};
+
+/* SD */
+static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.host_caps		= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_DISABLE,
+	.ext_cd_gpio		= S5PV310_GPX3(4),      /* XEINT_28 */
+	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* WiFi */
+static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
+	.max_width		= 4,
+	.host_caps		= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_DISABLE,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+};
+
+static void __init universal_sdhci_init(void)
+{
+	s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
+	s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
+	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
+}
+
 /* I2C0 */
 static struct i2c_board_info i2c0_devs[] __initdata = {
 	/* Camera, To be updated */
@@ -127,6 +198,13 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 };
 
 static struct platform_device *universal_devices[] __initdata = {
+	/* Samsung Platform Devices */
+	&mmc0_fixed_voltage,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+
+	/* Universal Devices */
 	&universal_gpio_keys,
 	&s5p_device_onenand,
 };
@@ -140,6 +218,8 @@ static void __init universal_map_io(void)
 
 static void __init universal_machine_init(void)
 {
+	universal_sdhci_init();
+
 	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 

arch/arm/plat-s3c24xx/devs.c

@@ -194,7 +194,6 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_
 	memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info));
 	s3c_device_ts.dev.platform_data = &s3c2410ts_info;
 }
-EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
 
 /* USB Device (Gadget)*/
 

arch/arm/plat-s3c24xx/include/plat/irq.h

@@ -107,9 +107,9 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
 /* exported for use in arch/arm/mach-s3c2410 */
 
 #ifdef CONFIG_PM
-extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
 #else
 #define s3c_irq_wake NULL
 #endif
 
-extern int s3c_irqext_type(unsigned int irq, unsigned int type);
+extern int s3c_irqext_type(struct irq_data *d, unsigned int type);

arch/arm/plat-s3c24xx/irq-pm.c

@@ -15,11 +15,14 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
+#include <linux/irq.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/irq.h>
 
+#include <asm/irq.h>
+
 /* state for IRQs over sleep */
 
 /* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
@@ -30,15 +33,15 @@
 unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
 unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
 
-int s3c_irq_wake(unsigned int irqno, unsigned int state)
+int s3c_irq_wake(struct irq_data *data, unsigned int state)
 {
-	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+	unsigned long irqbit = 1 << (data->irq - IRQ_EINT0);
 
 	if (!(s3c_irqwake_intallow & irqbit))
 		return -ENOENT;
 
 	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
+	       state ? "enabled" : "disabled", data->irq);
 
 	if (!state)
 		s3c_irqwake_intmask |= irqbit;

arch/arm/plat-s3c24xx/irq.c

@@ -34,30 +34,29 @@
 #include <plat/irq.h>
 
 static void
-s3c_irq_mask(unsigned int irqno)
+s3c_irq_mask(struct irq_data *data)
 {
+	unsigned int irqno = data->irq - IRQ_EINT0;
 	unsigned long mask;
 
-	irqno -= IRQ_EINT0;
-
 	mask = __raw_readl(S3C2410_INTMSK);
 	mask |= 1UL << irqno;
 	__raw_writel(mask, S3C2410_INTMSK);
 }
 
 static inline void
-s3c_irq_ack(unsigned int irqno)
+s3c_irq_ack(struct irq_data *data)
 {
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
 
 	__raw_writel(bitval, S3C2410_SRCPND);
 	__raw_writel(bitval, S3C2410_INTPND);
 }
 
 static inline void
-s3c_irq_maskack(unsigned int irqno)
+s3c_irq_maskack(struct irq_data *data)
 {
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
 	unsigned long mask;
 
 	mask = __raw_readl(S3C2410_INTMSK);
@@ -69,8 +68,9 @@ s3c_irq_maskack(unsigned int irqno)
 
 
 static void
-s3c_irq_unmask(unsigned int irqno)
+s3c_irq_unmask(struct irq_data *data)
 {
+	unsigned int irqno = data->irq;
 	unsigned long mask;
 
 	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
@@ -85,40 +85,39 @@ s3c_irq_unmask(unsigned int irqno)
 
 struct irq_chip s3c_irq_level_chip = {
 	.name		= "s3c-level",
-	.ack		= s3c_irq_maskack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake
+	.irq_ack	= s3c_irq_maskack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake
 };
 
 struct irq_chip s3c_irq_chip = {
 	.name		= "s3c",
-	.ack		= s3c_irq_ack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake
 };
 
 static void
-s3c_irqext_mask(unsigned int irqno)
+s3c_irqext_mask(struct irq_data *data)
 {
+	unsigned int irqno = data->irq - EXTINT_OFF;
 	unsigned long mask;
 
-	irqno -= EXTINT_OFF;
-
 	mask = __raw_readl(S3C24XX_EINTMASK);
 	mask |= ( 1UL << irqno);
 	__raw_writel(mask, S3C24XX_EINTMASK);
 }
 
 static void
-s3c_irqext_ack(unsigned int irqno)
+s3c_irqext_ack(struct irq_data *data)
 {
 	unsigned long req;
 	unsigned long bit;
 	unsigned long mask;
 
-	bit = 1UL << (irqno - EXTINT_OFF);
+	bit = 1UL << (data->irq - EXTINT_OFF);
 
 	mask = __raw_readl(S3C24XX_EINTMASK);
 
@@ -129,64 +128,57 @@ s3c_irqext_ack(unsigned int irqno)
 
 	/* not sure if we should be acking the parent irq... */
 
-	if (irqno <= IRQ_EINT7 ) {
+	if (data->irq <= IRQ_EINT7) {
 		if ((req & 0xf0) == 0)
-			s3c_irq_ack(IRQ_EINT4t7);
+			s3c_irq_ack(irq_get_irq_data(IRQ_EINT4t7));
 	} else {
 		if ((req >> 8) == 0)
-			s3c_irq_ack(IRQ_EINT8t23);
+			s3c_irq_ack(irq_get_irq_data(IRQ_EINT8t23));
 	}
 }
 
 static void
-s3c_irqext_unmask(unsigned int irqno)
+s3c_irqext_unmask(struct irq_data *data)
 {
+	unsigned int irqno = data->irq - EXTINT_OFF;
 	unsigned long mask;
 
-	irqno -= EXTINT_OFF;
-
 	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask &= ~( 1UL << irqno);
+	mask &= ~(1UL << irqno);
 	__raw_writel(mask, S3C24XX_EINTMASK);
 }
 
 int
-s3c_irqext_type(unsigned int irq, unsigned int type)
+s3c_irqext_type(struct irq_data *data, unsigned int type)
 {
 	void __iomem *extint_reg;
 	void __iomem *gpcon_reg;
 	unsigned long gpcon_offset, extint_offset;
 	unsigned long newvalue = 0, value;
 
-	if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
-	{
+	if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
 		gpcon_reg = S3C2410_GPFCON;
 		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (irq - IRQ_EINT0) * 2;
-		extint_offset = (irq - IRQ_EINT0) * 4;
-	}
-	else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
-	{
+		gpcon_offset = (data->irq - IRQ_EINT0) * 2;
+		extint_offset = (data->irq - IRQ_EINT0) * 4;
+	} else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
 		gpcon_reg = S3C2410_GPFCON;
 		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (irq - (EXTINT_OFF)) * 2;
-		extint_offset = (irq - (EXTINT_OFF)) * 4;
-	}
-	else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
-	{
+		gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
+		extint_offset = (data->irq - (EXTINT_OFF)) * 4;
+	} else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
 		gpcon_reg = S3C2410_GPGCON;
 		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (irq - IRQ_EINT8) * 2;
-		extint_offset = (irq - IRQ_EINT8) * 4;
-	}
-	else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
-	{
+		gpcon_offset = (data->irq - IRQ_EINT8) * 2;
+		extint_offset = (data->irq - IRQ_EINT8) * 4;
+	} else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
 		gpcon_reg = S3C2410_GPGCON;
 		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (irq - IRQ_EINT8) * 2;
-		extint_offset = (irq - IRQ_EINT16) * 4;
-	} else
+		gpcon_offset = (data->irq - IRQ_EINT8) * 2;
+		extint_offset = (data->irq - IRQ_EINT16) * 4;
+	} else {
 		return -1;
+	}
 
 	/* Set the GPIO to external interrupt mode */
 	value = __raw_readl(gpcon_reg);
@@ -234,20 +226,20 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
 
 static struct irq_chip s3c_irqext_chip = {
 	.name		= "s3c-ext",
-	.mask		= s3c_irqext_mask,
-	.unmask		= s3c_irqext_unmask,
-	.ack		= s3c_irqext_ack,
-	.set_type	= s3c_irqext_type,
-	.set_wake	= s3c_irqext_wake
+	.irq_mask	= s3c_irqext_mask,
+	.irq_unmask	= s3c_irqext_unmask,
+	.irq_ack	= s3c_irqext_ack,
+	.irq_set_type	= s3c_irqext_type,
+	.irq_set_wake	= s3c_irqext_wake
 };
 
 static struct irq_chip s3c_irq_eint0t4 = {
 	.name		= "s3c-ext0",
-	.ack		= s3c_irq_ack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake,
-	.set_type	= s3c_irqext_type,
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake,
+	.irq_set_type	= s3c_irqext_type,
 };
 
 /* mask values for the parent registers for each of the interrupt types */
@@ -261,109 +253,109 @@ static struct irq_chip s3c_irq_eint0t4 = {
 /* UART0 */
 
 static void
-s3c_irq_uart0_mask(unsigned int irqno)
+s3c_irq_uart0_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
+	s3c_irqsub_mask(data->irq, INTMSK_UART0, 7);
 }
 
 static void
-s3c_irq_uart0_unmask(unsigned int irqno)
+s3c_irq_uart0_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_UART0);
+	s3c_irqsub_unmask(data->irq, INTMSK_UART0);
 }
 
 static void
-s3c_irq_uart0_ack(unsigned int irqno)
+s3c_irq_uart0_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
+	s3c_irqsub_maskack(data->irq, INTMSK_UART0, 7);
 }
 
 static struct irq_chip s3c_irq_uart0 = {
 	.name		= "s3c-uart0",
-	.mask		= s3c_irq_uart0_mask,
-	.unmask		= s3c_irq_uart0_unmask,
-	.ack		= s3c_irq_uart0_ack,
+	.irq_mask	= s3c_irq_uart0_mask,
+	.irq_unmask	= s3c_irq_uart0_unmask,
+	.irq_ack	= s3c_irq_uart0_ack,
 };
 
 /* UART1 */
 
 static void
-s3c_irq_uart1_mask(unsigned int irqno)
+s3c_irq_uart1_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
+	s3c_irqsub_mask(data->irq, INTMSK_UART1, 7 << 3);
 }
 
 static void
-s3c_irq_uart1_unmask(unsigned int irqno)
+s3c_irq_uart1_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_UART1);
+	s3c_irqsub_unmask(data->irq, INTMSK_UART1);
 }
 
 static void
-s3c_irq_uart1_ack(unsigned int irqno)
+s3c_irq_uart1_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
+	s3c_irqsub_maskack(data->irq, INTMSK_UART1, 7 << 3);
 }
 
 static struct irq_chip s3c_irq_uart1 = {
 	.name		= "s3c-uart1",
-	.mask		= s3c_irq_uart1_mask,
-	.unmask		= s3c_irq_uart1_unmask,
-	.ack		= s3c_irq_uart1_ack,
+	.irq_mask	= s3c_irq_uart1_mask,
+	.irq_unmask	= s3c_irq_uart1_unmask,
+	.irq_ack	= s3c_irq_uart1_ack,
 };
 
 /* UART2 */
 
 static void
-s3c_irq_uart2_mask(unsigned int irqno)
+s3c_irq_uart2_mask(struct irq_data *data)
 {
-	s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
+	s3c_irqsub_mask(data->irq, INTMSK_UART2, 7 << 6);
 }
 
 static void
-s3c_irq_uart2_unmask(unsigned int irqno)
+s3c_irq_uart2_unmask(struct irq_data *data)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_UART2);
+	s3c_irqsub_unmask(data->irq, INTMSK_UART2);
 }
 
 static void
-s3c_irq_uart2_ack(unsigned int irqno)
+s3c_irq_uart2_ack(struct irq_data *data)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
+	s3c_irqsub_maskack(data->irq, INTMSK_UART2, 7 << 6);
 }
 
 static struct irq_chip s3c_irq_uart2 = {
 	.name		= "s3c-uart2",
-	.mask		= s3c_irq_uart2_mask,
-	.unmask		= s3c_irq_uart2_unmask,
-	.ack		= s3c_irq_uart2_ack,
+	.irq_mask	= s3c_irq_uart2_mask,
+	.irq_unmask	= s3c_irq_uart2_unmask,
+	.irq_ack	= s3c_irq_uart2_ack,
 };
 
 /* ADC and Touchscreen */
 
 static void
-s3c_irq_adc_mask(unsigned int irqno)
+s3c_irq_adc_mask(struct irq_data *d)
 {
-	s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
+	s3c_irqsub_mask(d->irq, INTMSK_ADCPARENT, 3 << 9);
 }
 
 static void
-s3c_irq_adc_unmask(unsigned int irqno)
+s3c_irq_adc_unmask(struct irq_data *d)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
+	s3c_irqsub_unmask(d->irq, INTMSK_ADCPARENT);
 }
 
 static void
-s3c_irq_adc_ack(unsigned int irqno)
+s3c_irq_adc_ack(struct irq_data *d)
 {
-	s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
+	s3c_irqsub_ack(d->irq, INTMSK_ADCPARENT, 3 << 9);
 }
 
 static struct irq_chip s3c_irq_adc = {
 	.name		= "s3c-adc",
-	.mask		= s3c_irq_adc_mask,
-	.unmask		= s3c_irq_adc_unmask,
-	.ack		= s3c_irq_adc_ack,
+	.irq_mask	= s3c_irq_adc_mask,
+	.irq_unmask	= s3c_irq_adc_unmask,
+	.irq_ack	= s3c_irq_adc_ack,
 };
 
 /* irq demux for adc */

arch/arm/plat-s3c24xx/s3c2443-clock.c

@@ -271,7 +271,7 @@ static struct clk init_clocks[] = {
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
 	}, {
 		.name		= "hsmmc",
-		.id		= 0,
+		.id		= 1,
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_HSMMC,

arch/arm/plat-s5p/Kconfig

@@ -56,3 +56,29 @@ config S5P_DEV_ONENAND
 	bool
 	help
 	  Compile in platform device definition for OneNAND controller
+
+config S5P_DEV_CSIS0
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 0
+
+config S5P_DEV_CSIS1
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 1
+
+menuconfig S5P_SYSMMU
+	bool "SYSMMU support"
+	depends on ARCH_S5PV310
+	help
+	  This is a System MMU driver for Samsung ARM based Soc.
+
+if S5P_SYSMMU
+
+config S5P_SYSMMU_DEBUG
+	bool "Enables debug messages"
+	depends on S5P_SYSMMU
+	help
+	  This enables SYSMMU driver debug massages.
+
+endif

arch/arm/plat-s5p/Makefile

@@ -28,3 +28,6 @@ obj-$(CONFIG_S5P_DEV_FIMC0)	+= dev-fimc0.o
 obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
 obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
+obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
+obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
+obj-$(CONFIG_S5P_SYSMMU)	+= sysmmu.o

arch/arm/plat-s5p/cpu.c

@@ -108,6 +108,11 @@ static struct map_desc s5p_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C_PA_WDT),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5P_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 

arch/arm/plat-s5p/dev-csis0.c

+/*
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * S5P series device definition for MIPI-CSIS channel 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+
+static struct resource s5p_mipi_csis0_resource[] = {
+	[0] = {
+		.start = S5P_PA_MIPI_CSIS0,
+		.end   = S5P_PA_MIPI_CSIS0 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_MIPI_CSIS0,
+		.end   = IRQ_MIPI_CSIS0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device s5p_device_mipi_csis0 = {
+	.name		  = "s5p-mipi-csis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p_mipi_csis0_resource),
+	.resource	  = s5p_mipi_csis0_resource,
+};

arch/arm/plat-s5p/dev-csis1.c

+/*
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * S5P series device definition for MIPI-CSIS channel 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+
+static struct resource s5p_mipi_csis1_resource[] = {
+	[0] = {
+		.start = S5P_PA_MIPI_CSIS1,
+		.end   = S5P_PA_MIPI_CSIS1 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_MIPI_CSIS1,
+		.end   = IRQ_MIPI_CSIS1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_mipi_csis1 = {
+	.name		  = "s5p-mipi-csis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5p_mipi_csis1_resource),
+	.resource	  = s5p_mipi_csis1_resource,
+};

arch/arm/plat-s5p/include/plat/csis.h

+/*
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * S5P series MIPI CSI slave device support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_CSIS_H_
+#define PLAT_S5P_CSIS_H_ __FILE__
+
+/**
+ * struct s5p_platform_mipi_csis - platform data for MIPI-CSIS
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @alignment: data alignment in bits
+ * @hs_settle: HS-RX settle time
+ */
+struct s5p_platform_mipi_csis {
+	unsigned long clk_rate;
+	u8 lanes;
+	u8 alignment;
+	u8 hs_settle;
+};
+
+#endif /* PLAT_S5P_CSIS_H_ */

arch/arm/plat-s5p/include/plat/map-s5p.h

@@ -15,6 +15,7 @@
 
 #define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
 #define S5P_VA_CMU		S3C_ADDR(0x02100000)
+#define S5P_VA_PMU		S3C_ADDR(0x02180000)
 #define S5P_VA_GPIO		S3C_ADDR(0x02200000)
 #define S5P_VA_GPIO1		S5P_VA_GPIO
 #define S5P_VA_GPIO2		S3C_ADDR(0x02240000)

arch/arm/plat-s5p/include/plat/regs-srom.h

+/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_REGS_SROM_H
+#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SROMREG(x)		(S5P_VA_SROMC + (x))
+
+#define S5P_SROM_BW		S5P_SROMREG(0x0)
+#define S5P_SROM_BC0		S5P_SROMREG(0x4)
+#define S5P_SROM_BC1		S5P_SROMREG(0x8)
+#define S5P_SROM_BC2		S5P_SROMREG(0xc)
+#define S5P_SROM_BC3		S5P_SROMREG(0x10)
+#define S5P_SROM_BC4		S5P_SROMREG(0x14)
+#define S5P_SROM_BC5		S5P_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5P_SROM_BW__DATAWIDTH__SHIFT		0
+#define S5P_SROM_BW__ADDRMODE__SHIFT		1
+#define S5P_SROM_BW__WAITENABLE__SHIFT		2
+#define S5P_SROM_BW__BYTEENABLE__SHIFT		3
+
+#define S5P_SROM_BW__CS_MASK			0xf
+
+#define S5P_SROM_BW__NCS0__SHIFT		0
+#define S5P_SROM_BW__NCS1__SHIFT		4
+#define S5P_SROM_BW__NCS2__SHIFT		8
+#define S5P_SROM_BW__NCS3__SHIFT		12
+#define S5P_SROM_BW__NCS4__SHIFT		16
+#define S5P_SROM_BW__NCS5__SHIFT		20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5P_SROM_BCX__PMC__SHIFT		0
+#define S5P_SROM_BCX__TACP__SHIFT		4
+#define S5P_SROM_BCX__TCAH__SHIFT		8
+#define S5P_SROM_BCX__TCOH__SHIFT		12
+#define S5P_SROM_BCX__TACC__SHIFT		16
+#define S5P_SROM_BCX__TCOS__SHIFT		24
+#define S5P_SROM_BCX__TACS__SHIFT		28
+
+#endif /* __ASM_PLAT_S5P_REGS_SROM_H */

arch/arm/plat-s5p/include/plat/sysmmu.h

+/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Samsung sysmmu driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_SYSMMU_H
+#define __ASM_PLAT_S5P_SYSMMU_H __FILE__
+
+/* debug macro */
+#ifdef CONFIG_S5P_SYSMMU_DEBUG
+#define sysmmu_debug(fmt, arg...)	printk(KERN_INFO "[%s] " fmt, __func__, ## arg)
+#else
+#define sysmmu_debug(fmt, arg...)	do { } while (0)
+#endif
+
+#endif /* __ASM_PLAT_S5P_SYSMMU_H */

arch/arm/plat-s5p/irq-eint.c

@@ -28,39 +28,40 @@
 #include <plat/gpio-cfg.h>
 #include <mach/regs-gpio.h>
 
-static inline void s5p_irq_eint_mask(unsigned int irq)
+static inline void s5p_irq_eint_mask(struct irq_data *data)
 {
 	u32 mask;
 
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
-	mask |= eint_irq_to_bit(irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask |= eint_irq_to_bit(data->irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
 }
 
-static void s5p_irq_eint_unmask(unsigned int irq)
+static void s5p_irq_eint_unmask(struct irq_data *data)
 {
 	u32 mask;
 
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
-	mask &= ~(eint_irq_to_bit(irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask &= ~(eint_irq_to_bit(data->irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
 }
 
-static inline void s5p_irq_eint_ack(unsigned int irq)
+static inline void s5p_irq_eint_ack(struct irq_data *data)
 {
-	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
 }
 
-static void s5p_irq_eint_maskack(unsigned int irq)
+static void s5p_irq_eint_maskack(struct irq_data *data)
 {
 	/* compiler should in-line these */
-	s5p_irq_eint_mask(irq);
-	s5p_irq_eint_ack(irq);
+	s5p_irq_eint_mask(data);
+	s5p_irq_eint_ack(data);
 }
 
-static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
+static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
 {
-	int offs = EINT_OFFSET(irq);
+	int offs = EINT_OFFSET(data->irq);
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -94,10 +95,10 @@ static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
 	shift = (offs & 0x7) * 4;
 	mask = 0x7 << shift;
 
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
 	ctrl &= ~mask;
 	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
 
 	if ((0 <= offs) && (offs < 8))
 		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
@@ -119,13 +120,13 @@ static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
 
 static struct irq_chip s5p_irq_eint = {
 	.name		= "s5p-eint",
-	.mask		= s5p_irq_eint_mask,
-	.unmask		= s5p_irq_eint_unmask,
-	.mask_ack	= s5p_irq_eint_maskack,
-	.ack		= s5p_irq_eint_ack,
-	.set_type	= s5p_irq_eint_set_type,
+	.irq_mask	= s5p_irq_eint_mask,
+	.irq_unmask	= s5p_irq_eint_unmask,
+	.irq_mask_ack	= s5p_irq_eint_maskack,
+	.irq_ack	= s5p_irq_eint_ack,
+	.irq_set_type	= s5p_irq_eint_set_type,
 #ifdef CONFIG_PM
-	.set_wake	= s3c_irqext_wake,
+	.irq_set_wake	= s3c_irqext_wake,
 #endif
 };
 
@@ -159,42 +160,43 @@ static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 	s5p_irq_demux_eint(IRQ_EINT(24));
 }
 
-static inline void s5p_irq_vic_eint_mask(unsigned int irq)
+static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
 {
-	void __iomem *base = get_irq_chip_data(irq);
+	void __iomem *base = irq_data_get_irq_chip_data(data);
 
-	s5p_irq_eint_mask(irq);
-	writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR);
+	s5p_irq_eint_mask(data);
+	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
 }
 
-static void s5p_irq_vic_eint_unmask(unsigned int irq)
+static void s5p_irq_vic_eint_unmask(struct irq_data *data)
 {
-	void __iomem *base = get_irq_chip_data(irq);
+	void __iomem *base = irq_data_get_irq_chip_data(data);
 
-	s5p_irq_eint_unmask(irq);
-	writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE);
+	s5p_irq_eint_unmask(data);
+	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
 }
 
-static inline void s5p_irq_vic_eint_ack(unsigned int irq)
+static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
 {
-	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
 }
 
-static void s5p_irq_vic_eint_maskack(unsigned int irq)
+static void s5p_irq_vic_eint_maskack(struct irq_data *data)
 {
-	s5p_irq_vic_eint_mask(irq);
-	s5p_irq_vic_eint_ack(irq);
+	s5p_irq_vic_eint_mask(data);
+	s5p_irq_vic_eint_ack(data);
 }
 
 static struct irq_chip s5p_irq_vic_eint = {
 	.name		= "s5p_vic_eint",
-	.mask		= s5p_irq_vic_eint_mask,
-	.unmask		= s5p_irq_vic_eint_unmask,
-	.mask_ack	= s5p_irq_vic_eint_maskack,
-	.ack		= s5p_irq_vic_eint_ack,
-	.set_type	= s5p_irq_eint_set_type,
+	.irq_mask	= s5p_irq_vic_eint_mask,
+	.irq_unmask	= s5p_irq_vic_eint_unmask,
+	.irq_mask_ack	= s5p_irq_vic_eint_maskack,
+	.irq_ack	= s5p_irq_vic_eint_ack,
+	.irq_set_type	= s5p_irq_eint_set_type,
 #ifdef CONFIG_PM
-	.set_wake	= s3c_irqext_wake,
+	.irq_set_wake	= s3c_irqext_wake,
 #endif
 };
 

arch/arm/plat-s5p/irq-gpioint.c

@@ -30,9 +30,9 @@
 
 static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR];
 
-static int s5p_gpioint_get_group(unsigned int irq)
+static int s5p_gpioint_get_group(struct irq_data *data)
 {
-	struct gpio_chip *chip = get_irq_data(irq);
+	struct gpio_chip *chip = irq_data_get_irq_data(data);
 	struct s3c_gpio_chip *s3c_chip = container_of(chip,
 			struct s3c_gpio_chip, chip);
 	int group;
@@ -44,22 +44,22 @@ static int s5p_gpioint_get_group(unsigned int irq)
 	return group;
 }
 
-static int s5p_gpioint_get_offset(unsigned int irq)
+static int s5p_gpioint_get_offset(struct irq_data *data)
 {
-	struct gpio_chip *chip = get_irq_data(irq);
+	struct gpio_chip *chip = irq_data_get_irq_data(data);
 	struct s3c_gpio_chip *s3c_chip = container_of(chip,
 			struct s3c_gpio_chip, chip);
 
-	return irq - s3c_chip->irq_base;
+	return data->irq - s3c_chip->irq_base;
 }
 
-static void s5p_gpioint_ack(unsigned int irq)
+static void s5p_gpioint_ack(struct irq_data *data)
 {
 	int group, offset, pend_offset;
 	unsigned int value;
 
-	group = s5p_gpioint_get_group(irq);
-	offset = s5p_gpioint_get_offset(irq);
+	group = s5p_gpioint_get_group(data);
+	offset = s5p_gpioint_get_offset(data);
 	pend_offset = group << 2;
 
 	value = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset);
@@ -67,13 +67,13 @@ static void s5p_gpioint_ack(unsigned int irq)
 	__raw_writel(value, S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset);
 }
 
-static void s5p_gpioint_mask(unsigned int irq)
+static void s5p_gpioint_mask(struct irq_data *data)
 {
 	int group, offset, mask_offset;
 	unsigned int value;
 
-	group = s5p_gpioint_get_group(irq);
-	offset = s5p_gpioint_get_offset(irq);
+	group = s5p_gpioint_get_group(data);
+	offset = s5p_gpioint_get_offset(data);
 	mask_offset = group << 2;
 
 	value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
@@ -81,13 +81,13 @@ static void s5p_gpioint_mask(unsigned int irq)
 	__raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
 }
 
-static void s5p_gpioint_unmask(unsigned int irq)
+static void s5p_gpioint_unmask(struct irq_data *data)
 {
 	int group, offset, mask_offset;
 	unsigned int value;
 
-	group = s5p_gpioint_get_group(irq);
-	offset = s5p_gpioint_get_offset(irq);
+	group = s5p_gpioint_get_group(data);
+	offset = s5p_gpioint_get_offset(data);
 	mask_offset = group << 2;
 
 	value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
@@ -95,19 +95,19 @@ static void s5p_gpioint_unmask(unsigned int irq)
 	__raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
 }
 
-static void s5p_gpioint_mask_ack(unsigned int irq)
+static void s5p_gpioint_mask_ack(struct irq_data *data)
 {
-	s5p_gpioint_mask(irq);
-	s5p_gpioint_ack(irq);
+	s5p_gpioint_mask(data);
+	s5p_gpioint_ack(data);
 }
 
-static int s5p_gpioint_set_type(unsigned int irq, unsigned int type)
+static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type)
 {
 	int group, offset, con_offset;
 	unsigned int value;
 
-	group = s5p_gpioint_get_group(irq);
-	offset = s5p_gpioint_get_offset(irq);
+	group = s5p_gpioint_get_group(data);
+	offset = s5p_gpioint_get_offset(data);
 	con_offset = group << 2;
 
 	switch (type) {
@@ -142,11 +142,11 @@ static int s5p_gpioint_set_type(unsigned int irq, unsigned int type)
 
 struct irq_chip s5p_gpioint = {
 	.name		= "s5p_gpioint",
-	.ack		= s5p_gpioint_ack,
-	.mask		= s5p_gpioint_mask,
-	.mask_ack	= s5p_gpioint_mask_ack,
-	.unmask		= s5p_gpioint_unmask,
-	.set_type	= s5p_gpioint_set_type,
+	.irq_ack	= s5p_gpioint_ack,
+	.irq_mask	= s5p_gpioint_mask,
+	.irq_mask_ack	= s5p_gpioint_mask_ack,
+	.irq_unmask	= s5p_gpioint_unmask,
+	.irq_set_type	= s5p_gpioint_set_type,
 };
 
 static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)

arch/arm/plat-s5p/irq-pm.c

@@ -37,14 +37,14 @@
 unsigned long s3c_irqwake_intallow	= 0x00000006L;
 unsigned long s3c_irqwake_eintallow	= 0xffffffffL;
 
-int s3c_irq_wake(unsigned int irqno, unsigned int state)
+int s3c_irq_wake(struct irq_data *data, unsigned int state)
 {
 	unsigned long irqbit;
 
-	switch (irqno) {
+	switch (data->irq) {
 	case IRQ_RTC_TIC:
 	case IRQ_RTC_ALARM:
-		irqbit = 1 << (irqno + 1 - IRQ_RTC_ALARM);
+		irqbit = 1 << (data->irq + 1 - IRQ_RTC_ALARM);
 		if (!state)
 			s3c_irqwake_intmask |= irqbit;
 		else

arch/arm/plat-s5p/sysmmu.c

+/* linux/arch/arm/plat-s5p/sysmmu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <mach/regs-sysmmu.h>
+#include <mach/sysmmu.h>
+
+#include <plat/sysmmu.h>
+
+struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM];
+
+void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp)
+{
+	unsigned int reg_mmu_ctrl;
+	unsigned int reg_mmu_status;
+	unsigned int reg_pt_base_addr;
+	unsigned int reg_int_status;
+	unsigned int reg_page_ft_addr;
+
+	reg_int_status = __raw_readl(sysmmuconp->regs + S5P_INT_STATUS);
+	reg_mmu_ctrl = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL);
+	reg_mmu_status = __raw_readl(sysmmuconp->regs + S5P_MMU_STATUS);
+	reg_pt_base_addr = __raw_readl(sysmmuconp->regs + S5P_PT_BASE_ADDR);
+	reg_page_ft_addr = __raw_readl(sysmmuconp->regs + S5P_PAGE_FAULT_ADDR);
+
+	printk(KERN_INFO "%s: ips:%s\n", __func__, sysmmuconp->name);
+	printk(KERN_INFO "%s: MMU_CTRL:0x%X, ", __func__, reg_mmu_ctrl);
+	printk(KERN_INFO "MMU_STATUS:0x%X, PT_BASE_ADDR:0x%X\n", reg_mmu_status, reg_pt_base_addr);
+	printk(KERN_INFO "%s: INT_STATUS:0x%X, PAGE_FAULT_ADDR:0x%X\n", __func__, reg_int_status, reg_page_ft_addr);
+
+	switch (reg_int_status & 0xFF) {
+	case 0x1:
+		printk(KERN_INFO "%s: Page fault\n", __func__);
+		printk(KERN_INFO "%s: Virtual address causing last page fault or bus error : 0x%x\n", __func__ , reg_page_ft_addr);
+		break;
+	case 0x2:
+		printk(KERN_INFO "%s: AR multi-hit fault\n", __func__);
+		break;
+	case 0x4:
+		printk(KERN_INFO "%s: AW multi-hit fault\n", __func__);
+		break;
+	case 0x8:
+		printk(KERN_INFO "%s: Bus error\n", __func__);
+		break;
+	case 0x10:
+		printk(KERN_INFO "%s: AR Security protection fault\n", __func__);
+		break;
+	case 0x20:
+		printk(KERN_INFO "%s: AR Access protection fault\n", __func__);
+		break;
+	case 0x40:
+		printk(KERN_INFO "%s: AW Security protection fault\n", __func__);
+		break;
+	case 0x80:
+		printk(KERN_INFO "%s: AW Access protection fault\n", __func__);
+		break;
+	}
+}
+
+static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id)
+{
+	unsigned int i;
+	unsigned int reg_int_status;
+	struct sysmmu_controller *sysmmuconp;
+
+	for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) {
+		sysmmuconp = &s5p_sysmmu_cntlrs[i];
+
+		if (sysmmuconp->enable == true) {
+			reg_int_status = __raw_readl(sysmmuconp->regs + S5P_INT_STATUS);
+
+			if (reg_int_status & 0xFF)
+				s5p_sysmmu_register(sysmmuconp);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+int s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd)
+{
+	struct sysmmu_controller *sysmmuconp = NULL;
+
+	sysmmuconp = &s5p_sysmmu_cntlrs[ips];
+
+	if (sysmmuconp == NULL) {
+		printk(KERN_ERR "failed to get ip's sysmmu info\n");
+		return 1;
+	}
+
+	/* Set sysmmu page table base address */
+	__raw_writel(pgd, sysmmuconp->regs + S5P_PT_BASE_ADDR);
+
+	if (s5p_sysmmu_tlb_invalidate(ips) != 0)
+		printk(KERN_ERR "failed s5p_sysmmu_tlb_invalidate\n");
+
+	return 0;
+}
+
+static int s5p_sysmmu_set_tablebase(sysmmu_ips ips)
+{
+	unsigned int pg;
+	struct sysmmu_controller *sysmmuconp;
+
+	sysmmuconp = &s5p_sysmmu_cntlrs[ips];
+
+	if (sysmmuconp == NULL) {
+		printk(KERN_ERR "failed to get ip's sysmmu info\n");
+		return 1;
+	}
+
+	__asm__("mrc	p15, 0, %0, c2, c0, 0"	\
+		: "=r" (pg) : : "cc");		\
+		pg &= ~0x3fff;
+
+	sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg);
+
+	/* Set sysmmu page table base address */
+	__raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR);
+
+	return 0;
+}
+
+int s5p_sysmmu_enable(sysmmu_ips ips)
+{
+	unsigned int reg;
+
+	struct sysmmu_controller *sysmmuconp;
+
+	sysmmuconp = &s5p_sysmmu_cntlrs[ips];
+
+	if (sysmmuconp == NULL) {
+		printk(KERN_ERR "failed to get ip's sysmmu info\n");
+		return 1;
+	}
+
+	s5p_sysmmu_set_tablebase(ips);
+
+	/* replacement policy : LRU */
+	reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CFG);
+	reg |= 0x1;
+	__raw_writel(reg, sysmmuconp->regs + S5P_MMU_CFG);
+
+	/* Enable interrupt, Enable MMU */
+	reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL);
+	reg |= (0x1 << 2) | (0x1 << 0);
+
+	__raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL);
+
+	sysmmuconp->enable = true;
+
+	return 0;
+}
+
+int s5p_sysmmu_disable(sysmmu_ips ips)
+{
+	unsigned int reg;
+
+	struct sysmmu_controller *sysmmuconp = NULL;
+
+	if (ips > S5P_SYSMMU_TOTAL_IPNUM)
+		printk(KERN_ERR "failed to get ips parameter\n");
+
+	sysmmuconp = &s5p_sysmmu_cntlrs[ips];
+
+	if (sysmmuconp == NULL) {
+		printk(KERN_ERR "failed to get ip's sysmmu info\n");
+		return 1;
+	}
+
+	reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CFG);
+
+	/* replacement policy : LRU */
+	reg |= 0x1;
+	__raw_writel(reg, sysmmuconp->regs + S5P_MMU_CFG);
+
+	reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL);
+
+	/* Disable MMU */
+	reg &= ~0x1;
+	__raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL);
+
+	sysmmuconp->enable = false;
+
+	return 0;
+}
+
+int s5p_sysmmu_tlb_invalidate(sysmmu_ips ips)
+{
+	unsigned int reg;
+	struct sysmmu_controller *sysmmuconp = NULL;
+
+	sysmmuconp = &s5p_sysmmu_cntlrs[ips];
+
+	if (sysmmuconp == NULL) {
+		printk(KERN_ERR "failed to get ip's sysmmu info\n");
+		return 1;
+	}
+
+	/* set Block MMU for flush TLB */
+	reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL);
+	reg |= 0x1 << 1;
+	__raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL);
+
+	/* flush all TLB entry */
+	__raw_writel(0x1, sysmmuconp->regs + S5P_MMU_FLUSH);
+
+	/* set Un-block MMU after flush TLB */
+	reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL);
+	reg &= ~(0x1 << 1);
+	__raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL);
+
+	return 0;
+}
+
+static int s5p_sysmmu_probe(struct platform_device *pdev)
+{
+	int i;
+	int ret;
+	struct resource *res;
+	struct sysmmu_controller *sysmmuconp;
+	sysmmu_ips ips;
+
+	for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) {
+		sysmmuconp = &s5p_sysmmu_cntlrs[i];
+		if (sysmmuconp == NULL) {
+			printk(KERN_ERR "failed to get ip's sysmmu info\n");
+			ret = -ENOENT;
+			goto err_res;
+		}
+
+		sysmmuconp->name = sysmmu_ips_name[i];
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res) {
+			printk(KERN_ERR "failed to get sysmmu resource\n");
+			ret = -ENODEV;
+			goto err_res;
+		}
+
+		sysmmuconp->mem = request_mem_region(res->start,
+				((res->end) - (res->start)) + 1, pdev->name);
+		if (!sysmmuconp->mem) {
+			pr_err("failed to request sysmmu memory region\n");
+			ret = -EBUSY;
+			goto err_res;
+		}
+
+		sysmmuconp->regs = ioremap(res->start, res->end - res->start + 1);
+		if (!sysmmuconp->regs) {
+			pr_err("failed to sysmmu ioremap\n");
+			ret = -ENXIO;
+			goto err_reg;
+		}
+
+		sysmmuconp->irq = platform_get_irq(pdev, i);
+		if (sysmmuconp->irq <= 0) {
+			pr_err("failed to get sysmmu irq resource\n");
+			ret = -ENOENT;
+			goto err_map;
+		}
+
+		ret = request_irq(sysmmuconp->irq, s5p_sysmmu_irq, IRQF_DISABLED, pdev->name, sysmmuconp);
+		if (ret) {
+			pr_err("failed to request irq\n");
+			ret = -ENOENT;
+			goto err_map;
+		}
+
+		ips = (sysmmu_ips)i;
+
+		sysmmuconp->ips = ips;
+	}
+
+	return 0;
+
+err_reg:
+	release_mem_region((resource_size_t)sysmmuconp->mem, (resource_size_t)((res->end) - (res->start) + 1));
+err_map:
+	iounmap(sysmmuconp->regs);
+err_res:
+	return ret;
+}
+
+static int s5p_sysmmu_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+int s5p_sysmmu_runtime_suspend(struct device *dev)
+{
+	return 0;
+}
+
+int s5p_sysmmu_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+
+const struct dev_pm_ops s5p_sysmmu_pm_ops = {
+	.runtime_suspend	= s5p_sysmmu_runtime_suspend,
+	.runtime_resume		= s5p_sysmmu_runtime_resume,
+};
+
+static struct platform_driver s5p_sysmmu_driver = {
+	.probe		= s5p_sysmmu_probe,
+	.remove		= s5p_sysmmu_remove,
+	.driver		= {
+		.owner		= THIS_MODULE,
+		.name		= "s5p-sysmmu",
+		.pm		= &s5p_sysmmu_pm_ops,
+	}
+};
+
+static int __init s5p_sysmmu_init(void)
+{
+	return platform_driver_register(&s5p_sysmmu_driver);
+}
+arch_initcall(s5p_sysmmu_init);

arch/arm/plat-samsung/Kconfig

@@ -95,6 +95,12 @@ config S3C_GPIO_PULL_UPDOWN
 	help
 	  Internal configuration to enable the correct GPIO pull helper
 
+config S3C_GPIO_PULL_S3C2443
+	bool
+	select S3C_GPIO_PULL_UPDOWN
+	help
+	  Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
+
 config S3C_GPIO_PULL_DOWN
 	bool
 	help
@@ -333,4 +339,12 @@ config SAMSUNG_WAKEMASK
 	  and above. This code allows a set of interrupt to wakeup-mask
 	  mappings. See <plat/wakeup-mask.h>
 
+comment "Power Domain"
+
+config SAMSUNG_PD
+	bool "Samsung Power Domain"
+	depends on PM_RUNTIME
+	help
+	  Say Y here if you want to control Power Domain by Runtime PM.
+
 endif

arch/arm/plat-samsung/Makefile

@@ -73,6 +73,10 @@ obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
 
+# PD support
+
+obj-$(CONFIG_SAMSUNG_PD)	+= pd.o
+
 # PWM support
 
 obj-$(CONFIG_HAVE_PWM)		+= pwm.o

arch/arm/plat-samsung/clock.c

@@ -39,6 +39,9 @@
 #include <linux/clk.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#if defined(CONFIG_DEBUG_FS)
+#include <linux/debugfs.h>
+#endif
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -447,3 +450,92 @@ int __init s3c24xx_register_baseclocks(unsigned long xtal)
 	return 0;
 }
 
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/* debugfs support to trace clock tree hierarchy and attributes */
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	int err;
+	struct dentry *d, *child, *child_tmp;
+	struct clk *pa = c->parent;
+	char s[255];
+	char *p = s;
+
+	p += sprintf(p, "%s", c->name);
+
+	if (c->id >= 0)
+		sprintf(p, ":%d", c->id);
+
+	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
+	if (!d)
+		return -ENOMEM;
+
+	c->dent = d;
+
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usage);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	return 0;
+
+err_out:
+	d = c->dent;
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
+		debugfs_remove(child);
+	debugfs_remove(c->dent);
+	return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dent) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dent) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	list_for_each_entry(c, &clocks, list) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(clk_debugfs_root);
+	return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */

arch/arm/plat-samsung/dev-nand.c

@@ -126,5 +126,3 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
 
 	s3c_device_nand.dev.platform_data = npd;
 }
-
-EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);

arch/arm/plat-samsung/gpio-config.c

@@ -278,6 +278,48 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
 	pup &= 0x3;
 	return (__force s3c_gpio_pull_t)pup;
 }
+
+#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
+int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+				unsigned int off, s3c_gpio_pull_t pull)
+{
+	switch (pull) {
+	case S3C_GPIO_PULL_NONE:
+		pull = 0x01;
+		break;
+	case S3C_GPIO_PULL_UP:
+		pull = 0x00;
+		break;
+	case S3C_GPIO_PULL_DOWN:
+		pull = 0x02;
+		break;
+	}
+	return s3c_gpio_setpull_updown(chip, off, pull);
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
+					unsigned int off)
+{
+	s3c_gpio_pull_t pull;
+
+	pull = s3c_gpio_getpull_updown(chip, off);
+
+	switch (pull) {
+	case 0x00:
+		pull = S3C_GPIO_PULL_UP;
+		break;
+	case 0x01:
+	case 0x03:
+		pull = S3C_GPIO_PULL_NONE;
+		break;
+	case 0x02:
+		pull = S3C_GPIO_PULL_DOWN;
+		break;
+	}
+
+	return pull;
+}
+#endif
 #endif
 
 #if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)

arch/arm/plat-samsung/gpiolib.c

@@ -197,3 +197,10 @@ void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
 		s3c_gpiolib_add(chip);
 	}
 }
+
+void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++)
+		s3c_gpiolib_add(chip);
+}

arch/arm/plat-samsung/include/plat/audio.h

@@ -25,10 +25,34 @@ extern void s3c64xx_ac97_setup_gpio(int);
 #define S5PC100_SPDIF_GPG3 1
 extern void s5pc100_spdif_setup_gpio(int);
 
+struct samsung_i2s {
+/* If the Primary DAI has 5.1 Channels */
+#define QUIRK_PRI_6CHAN		(1 << 0)
+/* If the I2S block has a Stereo Overlay Channel */
+#define QUIRK_SEC_DAI		(1 << 1)
+/*
+ * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
+ * The Machine driver must provide suitably set clock to the I2S block.
+ */
+#define QUIRK_NO_MUXPSR		(1 << 2)
+#define QUIRK_NEED_RSTCLR	(1 << 3)
+	/* Quirks of the I2S controller */
+	u32 quirks;
+
+	/*
+	 * Array of clock names that can be used to generate I2S signals.
+	 * Also corresponds to clocks of I2SMOD[10]
+	 */
+	const char **src_clk;
+};
+
 /**
  * struct s3c_audio_pdata - common platform data for audio device drivers
  * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
  */
 struct s3c_audio_pdata {
 	int (*cfg_gpio)(struct platform_device *);
+	union {
+		struct samsung_i2s i2s;
+	} type;
 };

arch/arm/plat-samsung/include/plat/clock.h

@@ -47,6 +47,9 @@ struct clk {
 
 	struct clk_ops		*ops;
 	int		    (*enable)(struct clk *, int enable);
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
 };
 
 /* other clocks which may be registered by board support */

arch/arm/plat-samsung/include/plat/devs.h

@@ -96,6 +96,16 @@ extern struct platform_device s5pv210_device_iis1;
 extern struct platform_device s5pv210_device_iis2;
 extern struct platform_device s5pv210_device_spdif;
 
+extern struct platform_device s5pv310_device_ac97;
+extern struct platform_device s5pv310_device_pcm0;
+extern struct platform_device s5pv310_device_pcm1;
+extern struct platform_device s5pv310_device_pcm2;
+extern struct platform_device s5pv310_device_i2s0;
+extern struct platform_device s5pv310_device_i2s1;
+extern struct platform_device s5pv310_device_i2s2;
+extern struct platform_device s5pv310_device_spdif;
+extern struct platform_device s5pv310_device_pd[];
+
 extern struct platform_device s5p6442_device_pcm0;
 extern struct platform_device s5p6442_device_pcm1;
 extern struct platform_device s5p6442_device_iis0;
@@ -106,6 +116,8 @@ extern struct platform_device s5p6440_device_pcm;
 extern struct platform_device s5p6440_device_iis;
 
 extern struct platform_device s5p6450_device_iis0;
+extern struct platform_device s5p6450_device_iis1;
+extern struct platform_device s5p6450_device_iis2;
 extern struct platform_device s5p6450_device_pcm0;
 
 extern struct platform_device s5pc100_device_ac97;
@@ -122,6 +134,11 @@ extern struct platform_device s5p_device_fimc0;
 extern struct platform_device s5p_device_fimc1;
 extern struct platform_device s5p_device_fimc2;
 
+extern struct platform_device s5p_device_mipi_csis0;
+extern struct platform_device s5p_device_mipi_csis1;
+
+extern struct platform_device s5pv310_device_sysmmu;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440

arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h

@@ -244,7 +244,7 @@ extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
  * This helper function reads the state of the pull-{up,down} resistor for the
  * given GPIO in the same case as s3c_gpio_setpull_upown.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
 						unsigned int off);
 
 #endif /* __PLAT_GPIO_CFG_HELPERS_H */

arch/arm/plat-samsung/include/plat/gpio-core.h

@@ -118,6 +118,8 @@ extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
 					   int nr_chips);
 extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
 					    int nr_chips);
+extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips);
 
 extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
 extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);

arch/arm/plat-samsung/include/plat/pd.h

+/* linux/arch/arm/plat-samsung/include/plat/pd.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_SAMSUNG_PD_H
+#define __ASM_PLAT_SAMSUNG_PD_H __FILE__
+
+struct samsung_pd_info {
+	int (*enable)(struct device *dev);
+	int (*disable)(struct device *dev);
+	void __iomem *base;
+};
+
+enum s5pv310_pd_block {
+	PD_MFC,
+	PD_G3D,
+	PD_LCD0,
+	PD_LCD1,
+	PD_TV,
+	PD_CAM,
+	PD_GPS
+};
+
+#endif /* __ASM_PLAT_SAMSUNG_PD_H */

arch/arm/plat-samsung/include/plat/pm.h

@@ -15,6 +15,8 @@
  * management
 */
 
+#include <linux/irq.h>
+
 #ifdef CONFIG_PM
 
 extern __init int s3c_pm_init(void);
@@ -100,7 +102,7 @@ extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
 
 #ifdef CONFIG_PM
-extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
+extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
 extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
 extern int s3c24xx_irq_resume(struct sys_device *dev);
 #else

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -107,6 +107,8 @@ extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
 /* Helper function availablity */
 
+extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
@@ -122,6 +124,39 @@ extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
+/* S3C2416 SDHCI setup */
+
+#ifdef CONFIG_S3C2416_SETUP_SDHCI
+extern char *s3c2416_hsmmc_clksrcs[4];
+
+extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+static inline void s3c2416_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
+#endif /* CONFIG_S3C_DEV_HSMMC */
+}
+
+static inline void s3c2416_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+}
+
+#else
+static inline void s3c2416_default_sdhci0(void) { }
+static inline void s3c2416_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C2416_SETUP_SDHCI */
 /* S3C64XX SDHCI setup */
 
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI

arch/arm/plat-samsung/irq-uart.c

@@ -28,9 +28,9 @@
  * are consecutive when looking up the interrupt in the demux routines.
  */
 
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+static inline void __iomem *s3c_irq_uart_base(struct irq_data *data)
 {
-	struct s3c_uart_irq *uirq = get_irq_chip_data(irq);
+	struct s3c_uart_irq *uirq = irq_data_get_irq_chip_data(data);
 	return uirq->regs;
 }
 
@@ -39,10 +39,10 @@ static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
 	return irq & 3;
 }
 
-static void s3c_irq_uart_mask(unsigned int irq)
+static void s3c_irq_uart_mask(struct irq_data *data)
 {
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
+	void __iomem *regs = s3c_irq_uart_base(data);
+	unsigned int bit = s3c_irq_uart_bit(data->irq);
 	u32 reg;
 
 	reg = __raw_readl(regs + S3C64XX_UINTM);
@@ -50,10 +50,10 @@ static void s3c_irq_uart_mask(unsigned int irq)
 	__raw_writel(reg, regs + S3C64XX_UINTM);
 }
 
-static void s3c_irq_uart_maskack(unsigned int irq)
+static void s3c_irq_uart_maskack(struct irq_data *data)
 {
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
+	void __iomem *regs = s3c_irq_uart_base(data);
+	unsigned int bit = s3c_irq_uart_bit(data->irq);
 	u32 reg;
 
 	reg = __raw_readl(regs + S3C64XX_UINTM);
@@ -62,10 +62,10 @@ static void s3c_irq_uart_maskack(unsigned int irq)
 	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
 }
 
-static void s3c_irq_uart_unmask(unsigned int irq)
+static void s3c_irq_uart_unmask(struct irq_data *data)
 {
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
+	void __iomem *regs = s3c_irq_uart_base(data);
+	unsigned int bit = s3c_irq_uart_bit(data->irq);
 	u32 reg;
 
 	reg = __raw_readl(regs + S3C64XX_UINTM);
@@ -73,17 +73,17 @@ static void s3c_irq_uart_unmask(unsigned int irq)
 	__raw_writel(reg, regs + S3C64XX_UINTM);
 }
 
-static void s3c_irq_uart_ack(unsigned int irq)
+static void s3c_irq_uart_ack(struct irq_data *data)
 {
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
+	void __iomem *regs = s3c_irq_uart_base(data);
+	unsigned int bit = s3c_irq_uart_bit(data->irq);
 
 	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
 }
 
 static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
 {
-	struct s3c_uart_irq *uirq = desc->handler_data;
+	struct s3c_uart_irq *uirq = desc->irq_data.handler_data;
 	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
 	int base = uirq->base_irq;
 
@@ -99,10 +99,10 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
 
 static struct irq_chip s3c_irq_uart = {
 	.name		= "s3c-uart",
-	.mask		= s3c_irq_uart_mask,
-	.unmask		= s3c_irq_uart_unmask,
-	.mask_ack	= s3c_irq_uart_maskack,
-	.ack		= s3c_irq_uart_ack,
+	.irq_mask	= s3c_irq_uart_mask,
+	.irq_unmask	= s3c_irq_uart_unmask,
+	.irq_mask_ack	= s3c_irq_uart_maskack,
+	.irq_ack	= s3c_irq_uart_ack,
 };
 
 static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
@@ -124,7 +124,7 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
 		set_irq_flags(irq, IRQF_VALID);
 	}
 
-	desc->handler_data = uirq;
+	desc->irq_data.handler_data = uirq;
 	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
 }
 

arch/arm/plat-samsung/irq-vic-timer.c

@@ -24,43 +24,46 @@
 
 static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
 {
-	generic_handle_irq((int)desc->handler_data);
+	generic_handle_irq((int)desc->irq_data.handler_data);
 }
 
 /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
 
-static void s3c_irq_timer_mask(unsigned int irq)
+static void s3c_irq_timer_mask(struct irq_data *data)
 {
 	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+	u32 mask = (u32)data->chip_data;
 
 	reg &= 0x1f;  /* mask out pending interrupts */
-	reg &= ~(1 << (irq - IRQ_TIMER0));
+	reg &= ~mask;
 	__raw_writel(reg, S3C64XX_TINT_CSTAT);
 }
 
-static void s3c_irq_timer_unmask(unsigned int irq)
+static void s3c_irq_timer_unmask(struct irq_data *data)
 {
 	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+	u32 mask = (u32)data->chip_data;
 
 	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= 1 << (irq - IRQ_TIMER0);
+	reg |= mask;
 	__raw_writel(reg, S3C64XX_TINT_CSTAT);
 }
 
-static void s3c_irq_timer_ack(unsigned int irq)
+static void s3c_irq_timer_ack(struct irq_data *data)
 {
 	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+	u32 mask = (u32)data->chip_data;
 
 	reg &= 0x1f;
-	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	reg |= mask << 5;
 	__raw_writel(reg, S3C64XX_TINT_CSTAT);
 }
 
 static struct irq_chip s3c_irq_timer = {
 	.name		= "s3c-timer",
-	.mask		= s3c_irq_timer_mask,
-	.unmask		= s3c_irq_timer_unmask,
-	.ack		= s3c_irq_timer_ack,
+	.irq_mask	= s3c_irq_timer_mask,
+	.irq_unmask	= s3c_irq_timer_unmask,
+	.irq_ack	= s3c_irq_timer_ack,
 };
 
 /**
@@ -79,8 +82,9 @@ void __init s3c_init_vic_timer_irq(unsigned int parent_irq,
 	set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer);
 
 	set_irq_chip(timer_irq, &s3c_irq_timer);
+	set_irq_chip_data(timer_irq, (void *)(1 << (timer_irq - IRQ_TIMER0)));
 	set_irq_handler(timer_irq, handle_level_irq);
 	set_irq_flags(timer_irq, IRQF_VALID);
 
-	desc->handler_data = (void *)timer_irq;
+	desc->irq_data.handler_data = (void *)timer_irq;
 }

arch/arm/plat-samsung/pd.c

+/* linux/arch/arm/plat-samsung/pd.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung Power domain support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
+#include <plat/pd.h>
+
+static int samsung_pd_probe(struct platform_device *pdev)
+{
+	struct samsung_pd_info *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+
+	if (!pdata) {
+		dev_err(dev, "no device data specified\n");
+		return -ENOENT;
+	}
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	dev_info(dev, "power domain registered\n");
+	return 0;
+}
+
+static int __devexit samsung_pd_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	pm_runtime_disable(dev);
+	return 0;
+}
+
+static int samsung_pd_runtime_suspend(struct device *dev)
+{
+	struct samsung_pd_info *pdata = dev->platform_data;
+	int ret = 0;
+
+	if (pdata->disable)
+		ret = pdata->disable(dev);
+
+	dev_dbg(dev, "suspended\n");
+	return ret;
+}
+
+static int samsung_pd_runtime_resume(struct device *dev)
+{
+	struct samsung_pd_info *pdata = dev->platform_data;
+	int ret = 0;
+
+	if (pdata->enable)
+		ret = pdata->enable(dev);
+
+	dev_dbg(dev, "resumed\n");
+	return ret;
+}
+
+static const struct dev_pm_ops samsung_pd_pm_ops = {
+	.runtime_suspend	= samsung_pd_runtime_suspend,
+	.runtime_resume		= samsung_pd_runtime_resume,
+};
+
+static struct platform_driver samsung_pd_driver = {
+	.driver		= {
+		.name		= "samsung-pd",
+		.owner		= THIS_MODULE,
+		.pm		= &samsung_pd_pm_ops,
+	},
+	.probe		= samsung_pd_probe,
+	.remove		= __devexit_p(samsung_pd_remove),
+};
+
+static int __init samsung_pd_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&samsung_pd_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add PD driver\n", __func__);
+
+	return ret;
+}
+arch_initcall(samsung_pd_init);

arch/arm/plat-samsung/pm.c

@@ -136,15 +136,15 @@ static void s3c_pm_restore_uarts(void) { }
 unsigned long s3c_irqwake_intmask	= 0xffffffffL;
 unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
 
-int s3c_irqext_wake(unsigned int irqno, unsigned int state)
+int s3c_irqext_wake(struct irq_data *data, unsigned int state)
 {
-	unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
+	unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
 
 	if (!(s3c_irqwake_eintallow & bit))
 		return -ENOENT;
 
 	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
+	       state ? "enabled" : "disabled", data->irq);
 
 	if (!state)
 		s3c_irqwake_eintmask |= bit;

drivers/serial/samsung.c

@@ -883,10 +883,10 @@ static struct uart_ops s3c24xx_serial_ops = {
 
 static struct uart_driver s3c24xx_uart_drv = {
 	.owner		= THIS_MODULE,
-	.dev_name	= "s3c2410_serial",
+	.driver_name	= "s3c2410_serial",
 	.nr		= CONFIG_SERIAL_SAMSUNG_UARTS,
 	.cons		= S3C24XX_SERIAL_CONSOLE,
-	.driver_name	= S3C24XX_SERIAL_NAME,
+	.dev_name	= S3C24XX_SERIAL_NAME,
 	.major		= S3C24XX_SERIAL_MAJOR,
 	.minor		= S3C24XX_SERIAL_MINOR,
 };