Commit bc61f4ff authored by David S. Miller's avatar David S. Miller

Merge nuts.davemloft.net:/disk1/BK/netnew-2.6

into nuts.davemloft.net:/disk1/BK/net-2.6
parents 38194998 5e1c40de
......@@ -72,9 +72,6 @@ choice
prompt "ARM system type"
default ARCH_RPC
config ARCH_ADIFCC
bool "ADIFCC-based"
config ARCH_CLPS7500
bool "Cirrus-CL-PS7500FE"
......@@ -191,6 +188,11 @@ config ARCH_ACORN
depends on ARCH_RPC
default y
config TIMER_ACORN
bool
depends on ARCH_ACORN || ARCH_CLPS7500
default y
#####################################################################
# Footbridge support
config FOOTBRIDGE
......
......@@ -88,7 +88,6 @@ textaddr-$(CONFIG_ARCH_CLPS711X) := 0xc0028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
machine-$(CONFIG_ARCH_ADIFCC) := adifcc
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410
......
......@@ -49,8 +49,6 @@ initrd_phys-$(CONFIG_ARCH_SA1100) := 0xc0800000
zreladdr-$(CONFIG_ARCH_PXA) := 0xa0008000
zreladdr-$(CONFIG_ARCH_IOP3XX) := 0xa0008000
params_phys-$(CONFIG_ARCH_IOP3XX) := 0xa0000100
zreladdr-$(CONFIG_ARCH_ADIFCC) := 0xc0008000
params_phys-$(CONFIG_ARCH_ADIFCC) := 0xc0000100
zreladdr-$(CONFIG_ARCH_IXP4XX) := 0x00008000
params-phys-$(CONFIG_ARCH_IXP4XX) := 0x00000100
zreladdr-$(CONFIG_ARCH_OMAP) := 0x10008000
......
......@@ -66,7 +66,4 @@ __XScale_start:
mov r7, #MACH_TYPE_IQ80310
#endif
#ifdef CONFIG_ARCH_ADI_EVB
mov r7, #MACH_TYPE_ADI_EVB
#endif
......@@ -8,3 +8,4 @@ obj-$(CONFIG_ICST525) += icst525.o
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_TIMER_ACORN) += time-acorn.o
......@@ -610,7 +610,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
* %-EBUSY physical address already marked in-use.
* %0 successful.
*/
static int __init
static int
__sa1111_probe(struct device *me, struct resource *mem, int irq)
{
struct sa1111 *sachip;
......
/*
* linux/arch/arm/kernel/time-acorn.c
* linux/arch/arm/common/time-acorn.c
*
* Copyright (c) 1996-2000 Russell King.
*
......@@ -11,6 +11,7 @@
* 24-Sep-1996 RMK Created
* 10-Oct-1996 RMK Brought up to date with arch-sa110eval
* 04-Dec-1997 RMK Updated for new arch/arm/time.c
* 13=Jun-2004 DS Moved to arch/arm/common b/c shared w/CLPS7500
*/
#include <linux/timex.h>
#include <linux/init.h>
......@@ -19,7 +20,7 @@
#include <asm/io.h>
#include <asm/hardware/ioc.h>
extern unsigned long (*gettimeoffset)(void);
#include <asm/mach/time.h>
static unsigned long ioctime_gettimeoffset(void)
{
......
This diff is collapsed.
......@@ -11,8 +11,7 @@ obj-y := arch.o compat.o dma.o entry-armv.o entry-common.o irq.o \
time.o traps.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_ARCH_ACORN) += ecard.o time-acorn.o
obj-$(CONFIG_ARCH_CLPS7500) += time-acorn.o
obj-$(CONFIG_ARCH_ACORN) += ecard.o
obj-$(CONFIG_FOOTBRIDGE) += isa.o
obj-$(CONFIG_FIQ) += fiq.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
......
......@@ -439,32 +439,6 @@
#endif
.endm
#elif defined(CONFIG_ARCH_ADI_EVB)
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
mov \rx, #0x00400000 @ physical base address
orrne \rx, \rx, #0xff000000 @ virtual base
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x5]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1002b
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x6]
tst \rd, #0x10
beq 1001b
.endm
#elif defined(CONFIG_ARCH_IXP4XX)
.macro addruart,rx
......
......@@ -562,7 +562,7 @@ ENTRY(soft_irq_mask)
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_IOP310) || defined(CONFIG_ARCH_ADIFCC)
#elif defined(CONFIG_ARCH_IOP310)
.macro disable_fiq
.endm
......
......@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <asm/elf.h>
#include <asm/hardware.h>
......@@ -34,6 +35,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#ifndef MEM_SIZE
#define MEM_SIZE (16*1024*1024)
......@@ -727,6 +729,7 @@ void __init setup_arch(char **cmdline_p)
* Set up various architecture-specific pointers
*/
init_arch_irq = mdesc->init_irq;
init_arch_time = mdesc->init_time;
init_machine = mdesc->init_machine;
#ifdef CONFIG_VT
......
......@@ -27,12 +27,15 @@
#include <linux/errno.h>
#include <linux/profile.h>
#include <linux/sysdev.h>
#include <linux/timer.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
u64 jiffies_64 = INITIAL_JIFFIES;
EXPORT_SYMBOL(jiffies_64);
......@@ -49,15 +52,11 @@ EXPORT_SYMBOL(rtc_lock);
/* change this if you have some constant time drift */
#define USECS_PER_JIFFY (1000000/HZ)
static int dummy_set_rtc(void)
{
return 0;
}
/*
* hook for setting the RTC's idea of the current time.
*/
int (*set_rtc)(void) = dummy_set_rtc;
int (*set_rtc)(void);
static unsigned long dummy_gettimeoffset(void)
{
......@@ -238,7 +237,7 @@ EXPORT_SYMBOL(leds_event);
#endif
#ifdef CONFIG_LEDS_TIMER
static void do_leds(void)
static inline void do_leds(void)
{
static unsigned int count = 50;
......@@ -316,12 +315,18 @@ int do_settimeofday(struct timespec *tv)
EXPORT_SYMBOL(do_settimeofday);
static struct irqaction timer_irq = {
.name = "timer",
.flags = SA_INTERRUPT,
};
void timer_tick(struct pt_regs *regs)
{
do_profile(regs);
do_leds();
do_set_rtc();
do_timer(regs);
}
void (*init_arch_time)(void);
void __init time_init(void)
{
init_arch_time();
}
/*
* Include architecture specific code
*/
#include <asm/arch/time.h>
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := arch.o irq.o mm.o
obj-m :=
obj-n :=
obj- :=
/*
* linux/arch/arm/mach-adifcc/arch.c
*
* Copyright (C) 2001 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
extern void adifcc_map_io(void);
extern void adifcc_init_irq(void);
#ifdef CONFIG_ARCH_ADI_EVB
MACHINE_START(ADI_EVB, "ADI 80200FCC Evaluation Board")
MAINTAINER("MontaVista Software Inc.")
BOOT_MEM(0xc0000000, 0x00400000, 0xff400000)
MAPIO(adifcc_map_io)
INITIRQ(adifcc_init_irq)
MACHINE_END
#endif
/*
* linux/arch/arm/mach-xscale/irq.c
*
* Author: Deepak Saxena
* Copyright: (C) 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Based on IOP80310 code. Currently there's nothing more than the
* 80200 on chip interrupts. That'll change once the hardware adds
* support for PCI though.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
#include <asm/hardware.h>
static void xs80200_irq_mask (unsigned int irq)
{
long INTCTL;
asm ("mrc p13, 0, %0, c0, c0, 0" : "=r" (INTCTL));
switch (irq) {
case IRQ_XS80200_BCU: INTCTL &= ~(1<<3); break;
case IRQ_XS80200_PMU: INTCTL &= ~(1<<2); break;
case IRQ_XS80200_EXTIRQ: INTCTL &= ~(1<<1); break;
case IRQ_XS80200_EXTFIQ: INTCTL &= ~(1<<0); break;
}
asm ("mcr p13, 0, %0, c0, c0, 0" : : "r" (INTCTL));
}
static void xs80200_irq_unmask (unsigned int irq)
{
long INTCTL;
asm ("mrc p13, 0, %0, c0, c0, 0" : "=r" (INTCTL));
switch (irq) {
case IRQ_XS80200_BCU: INTCTL |= (1<<3); break;
case IRQ_XS80200_PMU: INTCTL |= (1<<2); break;
case IRQ_XS80200_EXTIRQ: INTCTL |= (1<<1); break;
case IRQ_XS80200_EXTFIQ: INTCTL |= (1<<0); break;
}
asm ("mcr p13, 0, %0, c0, c0, 0" : : "r" (INTCTL));
}
void __init adifcc_init_irq(void)
{
int i;
for (i = 0; i < NR_XS80200_IRQS; i++) {
irq_desc[i].valid = 1;
irq_desc[i].probe_ok = 0;
irq_desc[i].mask_ack = xs80200_irq_mask;
irq_desc[i].mask = xs80200_irq_mask;
irq_desc[i].unmask = xs80200_irq_unmask;
}
}
/*
* linux/arch/arm/mach-xscale/mm.c
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
static struct map_desc adifcc_io_desc[] __initdata = {
/* on-board devices */
{ 0xff400000, 0x00400000, 0x00300000, MT_DEVICE }
};
void __init adifcc_map_io(void)
{
iotable_init(adifcc_io_desc, ARRAY_SIZE(adifcc_io_desc));
}
......@@ -37,6 +37,7 @@
extern void clps711x_map_io(void);
extern void clps711x_init_irq(void);
extern void clps711x_init_time(void);
/*
* The on-chip registers are given a size of 1MB so that a section can
......@@ -65,5 +66,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
BOOT_PARAMS(0xc0020000)
MAPIO(autcpu12_map_io)
INITIRQ(clps711x_init_irq)
INITTIME(clp711x_init_time)
MACHINE_END
......@@ -34,6 +34,7 @@
extern void clps711x_init_irq(void);
extern void clps711x_map_io(void);
extern void clps711x-init_time(void);
/*
* Map the CS89712 Ethernet port. That should be moved to the
......@@ -55,6 +56,7 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
BOOT_PARAMS(0xc0000100)
MAPIO(cdb89712_map_io)
INITIRQ(clps711x_init_irq)
INITTIME(clps711x_init_time)
MACHINE_END
static int cdb89712_hw_init(void)
......
......@@ -35,6 +35,7 @@
#include <asm/mach/map.h>
extern void clps711x_init_irq(void);
extern void clps711x_init_time(void);
static struct map_desc ceiva_io_desc[] __initdata = {
/* virtual, physical, length, type */
......@@ -58,4 +59,5 @@ MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
BOOT_PARAMS(0xc0000100)
MAPIO(ceiva_map_io)
INITIRQ(clps711x_init_irq)
INITTIME(clps711x_init_time)
MACHINE_END
......@@ -25,6 +25,7 @@
extern void clps711x_init_irq(void);
extern void clps711x_map_io(void);
extern void clps711x_init_time(void);
static void __init
fixup_clep7312(struct machine_desc *desc, struct tag *tags,
......@@ -44,5 +45,6 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
FIXUP(fixup_clep7312)
MAPIO(clps711x_map_io)
INITIRQ(clps711x_init_irq)
INITTIME(clps711x_init_time)
MACHINE_END
......@@ -27,6 +27,7 @@
extern void clps711x_init_irq(void);
extern void edb7211_map_io(void);
extern void clps711x_init_time(void);
static void __init
fixup_edb7211(struct machine_desc *desc, struct tag *tags,
......@@ -56,4 +57,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
FIXUP(fixup_edb7211)
MAPIO(edb7211_map_io)
INITIRQ(clps711x_init_irq)
INITTIME(clps711x_init_time)
MACHINE_END
......@@ -33,6 +33,7 @@
extern void clps711x_map_io(void);
extern void clps711x_init_irq(void);
extern void clps711x_init_time(void);
struct meminfo memmap = {
.nr_banks = 1,
......@@ -82,4 +83,5 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
FIXUP(fortunet_fixup)
MAPIO(clps711x_map_io)
INITIRQ(clps711x_init_irq)
INITTIME(clps711x_init_time)
MACHINE_END
......@@ -36,6 +36,7 @@
extern void clps711x_init_irq(void);
extern void clps711x_map_io(void);
extern void clps711x_init_time(void);
/*
* Map the P720T system PLD. It occupies two address spaces:
......@@ -86,6 +87,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
FIXUP(fixup_p720t)
MAPIO(p720t_map_io)
INITIRQ(clps711x_init_irq)
INITTIME(clps711x_init_time)
MACHINE_END
static int p720t_hw_init(void)
......
......@@ -18,12 +18,17 @@
*/
#include <linux/timex.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/io.h>
#include <asm/hardware/clps7111.h>
extern unsigned long (*gettimeoffset)(void);
#include <asm/mach/time.h>
/*
* gettimeoffset() returns time since last timer tick, in usecs.
......@@ -38,19 +43,36 @@ static unsigned long clps711x_gettimeoffset(void)
return (hwticks * (tick_nsec / 1000)) / LATCH;
}
void __init clps711x_setup_timer(void)
/*
* IRQ handler for the timer
*/
static irqreturn_t
p720t_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction clps711x_timer_irq = {
.name = "CLPS711x Timer Tick",
.flags = SA_INTERRUPT,
.handler = p720t_timer_interrupt
};
void __init clps711x_init_time(void)
{
struct timespec tv;
unsigned int syscon;
gettimeoffset = clps711x_gettimeoffset;
syscon = clps_readl(SYSCON1);
syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
clps_writel(syscon, SYSCON1);
clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
gettimeoffset = clps711x_gettimeoffset;
tv.tv_nsec = 0;
tv.tv_sec = clps_readl(RTCDR);
do_settimeofday(&tv);
......
......@@ -10,12 +10,13 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/hardware.h>
#include <asm/hardware/iomd.h>
......@@ -265,10 +266,47 @@ static void __init clps7500_map_io(void)
iotable_init(cl7500_io_desc, ARRAY_SIZE(cl7500_io_desc));
}
extern void ioctime_init(void);
static irqreturn_t
clps7500_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
timer_tick(regs);
/* Why not using do_leds interface?? */
{
/* Twinkle the lights. */
static int count, state = 0xff00;
if (count-- == 0) {
state ^= 0x100;
count = 25;
*((volatile unsigned int *)LED_ADDRESS) = state;
}
}
return IRQ_HANDLED;
}
static struct irqaction clps7500_timer_irq = {
.name = "CLPS7500 Timer Tick",
.flags = SA_INTERRUPT,
.handler = clps7500_timer_interrupt
};
/*
* Set up timer interrupt.
*/
void __init clps7500_init_time(void)
{
ioctime_init();
setup_irq(IRQ_TIMER, &clps7500_timer_irq);
}
MACHINE_START(CLPS7500, "CL-PS7500")
MAINTAINER("Philip Blundell")
BOOT_MEM(0x10000000, 0x03000000, 0xe0000000)
MAPIO(clps7500_map_io)
INITIRQ(clps7500_init_irq)
INITTIME(clps7500_init_time)
MACHINE_END
......@@ -26,6 +26,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#define IRQ_MASK 0xfe000000 /* read */
#define IRQ_MSET 0xfe000000 /* write */
#define IRQ_STAT 0xff000000 /* read */
......@@ -89,6 +91,103 @@ static void __init ebsa110_map_io(void)
iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
}
#define PIT_CTRL (PIT_BASE + 0x0d)
#define PIT_T2 (PIT_BASE + 0x09)
#define PIT_T1 (PIT_BASE + 0x05)
#define PIT_T0 (PIT_BASE + 0x01)
/*
* This is the rate at which your MCLK signal toggles (in Hz)
* This was measured on a 10 digit frequency counter sampling
* over 1 second.
*/
#define MCLK 47894000
/*
* This is the rate at which the PIT timers get clocked
*/
#define CLKBY7 (MCLK / 7)
/*
* This is the counter value. We tick at 200Hz on this platform.
*/
#define COUNT ((CLKBY7 + (HZ / 2)) / HZ)
/*
* Get the time offset from the system PIT. Note that if we have missed an
* interrupt, then the PIT counter will roll over (ie, be negative).
* This actually works out to be convenient.
*/
static unsigned long ebsa110_gettimeoffset(void)
{
unsigned long offset, count;
__raw_writeb(0x40, PIT_CTRL);
count = __raw_readb(PIT_T1);
count |= __raw_readb(PIT_T1) << 8;
/*
* If count > COUNT, make the number negative.
*/
if (count > COUNT)
count |= 0xffff0000;
offset = COUNT;
offset -= count;
/*
* `offset' is in units of timer counts. Convert
* offset to units of microseconds.
*/
offset = offset * (1000000 / HZ) / COUNT;
return offset;
}
static irqreturn_t
ebsa110_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
u32 count;
/* latch and read timer 1 */
__raw_writeb(0x40, PIT_CTRL);
count = __raw_readb(PIT_T1);
count |= __raw_readb(PIT_T1) << 8;
count += COUNT;
__raw_writeb(count & 0xff, PIT_T1);
__raw_writeb(count >> 8, PIT_T1);
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction ebsa110_timer_irq = {
.name = "EBSA110 Timer Tick",
.flags = SA_INTERRUPT,
.handler = ebsa110_timer_interrupt
};
/*
* Set up timer interrupt.
*/
void __init ebsa110_time_init(void)
{
/*
* Timer 1, mode 2, LSB/MSB
*/
__raw_writeb(0x70, PIT_CTRL);
__raw_writeb(COUNT & 0xff, PIT_T1);
__raw_writeb(COUNT >> 8, PIT_T1);
gettimeoffset = ebsa110_gettimeoffset;
setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
}
MACHINE_START(EBSA110, "EBSA110")
MAINTAINER("Russell King")
BOOT_MEM(0x00000000, 0xe0000000, 0xe0000000)
......@@ -98,4 +197,5 @@ MACHINE_START(EBSA110, "EBSA110")
SOFT_REBOOT
MAPIO(ebsa110_map_io)
INITIRQ(ebsa110_init_irq)
INITTIME(ebsa110_init_time)
MACHINE_END
......@@ -29,10 +29,13 @@
extern void epxa10db_map_io(void);
extern void epxa10db_init_irq(void);
extern void epxa10db_init_time(void);
MACHINE_START(CAMELOT, "Altera Epxa10db")
MAINTAINER("Altera Corporation")
BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000)
MAPIO(epxa10db_map_io)
INITIRQ(epxa10db_init_irq)
INITTIME(epxa10db_init_time)
MACHINE_END
......@@ -10,11 +10,17 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/hardware.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
extern int (*set_rtc)(void);
#define TIMER00_TYPE (volatile unsigned int*)
#include <asm/arch/timer00.h>
static int epxa10db_set_rtc(void)
{
......@@ -29,3 +35,39 @@ static int epxa10db_rtc_init(void)
}
__initcall(epxa10db_rtc_init);
/*
* IRQ handler for the timer
*/
static irqreturn_t
epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
// ...clear the interrupt
*TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))|=TIMER0_CR_CI_MSK;
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction epxa10db_timer_irq = {
.name = "Excalibur Timer Tick",
.flags = SA_INTERRUPT,
.handler = epxa10db_timer_interrupt
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
void __init epxa10db_init_time(void)
{
/* Start the timer */
*TIMER0_LIMIT(IO_ADDRESS(EXC_TIMER00_BASE))=(unsigned int)(EXC_AHB2_CLK_FREQUENCY/200);
*TIMER0_PRESCALE(IO_ADDRESS(EXC_TIMER00_BASE))=1;
*TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))=TIMER0_CR_IE_MSK | TIMER0_CR_S_MSK;
setup_irq(IRQ_TIMER0, &epxa10db_timer_irq);
}
......@@ -4,7 +4,7 @@
# Object file lists.
obj-y := arch.o dc21285.o dma.o irq.o isa-irq.o mm.o
obj-y := arch.o dc21285.o dma.o irq.o isa-irq.o mm.o time.o
obj-m :=
obj-n :=
obj- :=
......
......@@ -22,6 +22,7 @@
extern void footbridge_map_io(void);
extern void footbridge_init_irq(void);
extern void footbridge_init_time(void);
unsigned int mem_fclk_21285 = 50000000;
......@@ -43,6 +44,7 @@ MACHINE_START(EBSA285, "EBSA285")
VIDEO(0x000a0000, 0x000bffff)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
INITTIME(footbridge_init_time)
MACHINE_END
#endif
......@@ -78,6 +80,7 @@ MACHINE_START(NETWINDER, "Rebel-NetWinder")
FIXUP(fixup_netwinder)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
INITTIME(footbridge_init_time)
MACHINE_END
#endif
......@@ -103,6 +106,7 @@ MACHINE_START(CATS, "Chalice-CATS")
FIXUP(fixup_cats)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
INITTIME(footbridge_init_time)
MACHINE_END
#endif
......@@ -129,6 +133,7 @@ MACHINE_START(CO285, "co-EBSA285")
FIXUP(fixup_coebsa285)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
INITTIME(footbridge_init_time)
MACHINE_END
#endif
......@@ -139,5 +144,6 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
BOOT_PARAMS(0x00000100)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
INITTIME(footbridge_init_time)
MACHINE_END
#endif
......@@ -17,12 +17,23 @@
#define RTC_PORT(x) (rtc_base+(x))
#define RTC_ALWAYS_BCD 0
#include <linux/timex.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/mc146818rtc.h>
#include <linux/bcd.h>
#include <asm/hardware/dec21285.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/hardware/clps7111.h>
#include <asm/mach/time.h>
static int rtc_base;
......@@ -72,12 +83,7 @@ static unsigned long isa_gettimeoffset(void)
static irqreturn_t
isa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
if (machine_is_netwinder())
do_leds();
do_timer(regs);
do_set_rtc();
do_profile(regs);
timer_tick(regs);
return IRQ_HANDLED;
}
......@@ -195,22 +201,20 @@ timer1_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
*CSR_TIMER1_CLR = 0;
/* Do the LEDs things */
do_leds();
do_timer(regs);
do_set_rtc();
do_profile(regs);
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction footbridge_timer_irq = {
.flags = SA_INTERRUPT
};
/*
* Set up timer interrupt.
*/
void __init time_init(void)
void __init footbridge_init_time(void)
{
int irq;
if (machine_is_co285() ||
machine_is_personal_server())
/*
......@@ -270,8 +274,11 @@ void __init time_init(void)
*CSR_TIMER1_LOAD = timer1_latch;
*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16;
timer_irq.handler = timer1_interrupt;
irq = IRQ_TIMER1;
footbridge_timer_irq.name = "Timer1 Timer Tick";
footbrdige_timer_irq.handler = timer1_interrupt;
setup_irq(IRQ_TIMER1, &footbridge_timer_irq);
} else {
/* enable PIT timer */
/* set for periodic (4) and LSB/MSB write (0x30) */
......@@ -280,8 +287,10 @@ void __init time_init(void)
outb((mSEC_10_from_14/6) >> 8, 0x40);
gettimeoffset = isa_gettimeoffset;
timer_irq.handler = isa_timer_interrupt;
irq = IRQ_ISA_TIMER;
footbridge_timer_irq.name = "ISA Timer Tick";
footbrdige_timer_irq.handler = isa_timer_interrupt;
setup_irq(IRQ_ISA, &footbridge_timer_irq);
}
setup_irq(irq, &timer_irq);
}
......@@ -281,11 +281,17 @@ static void __init ap_init(void)
}
}
static void ap_time_init(void)
{
integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0);
}
MACHINE_START(INTEGRATOR, "ARM-Integrator")
MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
BOOT_MEM(0x00000000, 0x16000000, 0xf1600000)
BOOT_PARAMS(0x00000100)
MAPIO(ap_map_io)
INITIRQ(ap_init_irq)
INITTIME(ap_time_init)
INIT_MACHINE(ap_init)
MACHINE_END
......@@ -249,7 +249,7 @@ static struct clk cp_clcd_clk = {
static struct clk cp_mmci_clk = {
.name = "MCLK",
.rate = 33000000,
.rate = 14745600,
};
/*
......@@ -351,7 +351,7 @@ static unsigned int mmc_status(struct device *dev)
}
static struct mmc_platform_data mmc_data = {
.mclk = 33000000,
.mclk = 14745600,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
};
......@@ -419,11 +419,17 @@ static void __init intcp_init(void)
}
}
static void __init intcp_init_time(void)
{
integrator_time_init(1000000 / HZ, TIMER_CTRL_IE);
}
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
BOOT_MEM(0x00000000, 0x16000000, 0xf1600000)
BOOT_PARAMS(0x00000100)
MAPIO(intcp_map_io)
INITIRQ(intcp_init_irq)
INITTIME(intcp_init_time)
INIT_MACHINE(intcp_init)
MACHINE_END
......@@ -10,9 +10,16 @@
#include <linux/kernel.h>
#include <linux/time.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#define RTC_DR (IO_ADDRESS(INTEGRATOR_RTC_BASE) + 0)
#define RTC_MR (IO_ADDRESS(INTEGRATOR_RTC_BASE) + 4)
......@@ -44,3 +51,140 @@ static int integrator_rtc_init(void)
}
__initcall(integrator_rtc_init);
/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE)
/*
* How long is the timer interval?
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
#else
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */
/*
* What does it look like?
*/
typedef struct TimerStruct {
unsigned long TimerLoad;
unsigned long TimerValue;
unsigned long TimerControl;
unsigned long TimerClear;
} TimerStruct_t;
extern unsigned long (*gettimeoffset)(void);
static unsigned long timer_reload;
/*
* Returns number of ms since last clock interrupt. Note that interrupts
* will have been disabled by do_gettimeoffset()
*/
static unsigned long integrator_gettimeoffset(void)
{
volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE;
unsigned long ticks1, ticks2, status;
/*
* Get the current number of ticks. Note that there is a race
* condition between us reading the timer and checking for
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
ticks2 = timer1->TimerValue & 0xffff;
do {
ticks1 = ticks2;
status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
ticks2 = timer1->TimerValue & 0xffff;
} while (ticks2 > ticks1);
/*
* Number of ticks since last interrupt.
*/
ticks1 = timer_reload - ticks2;
/*
* Interrupt pending? If so, we've reloaded once already.
*/
if (status & (1 << IRQ_TIMERINT1))
ticks1 += timer_reload;
/*
* Convert the ticks to usecs
*/
return TICKS2USECS(ticks1);
}
/*
* IRQ handler for the timer
*/
static irqreturn_t
integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
// ...clear the interrupt
timer1->TimerClear = 1;
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction integrator_timer_irq = {
.name = "Integrator Timer Tick",
.flags = SA_INTERRUPT,
.handler = integrator_timer_interrupt
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
{
volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
unsigned int timer_ctrl = 0x80 | 0x40; /* periodic */
timer_reload = reload;
timer_ctrl |= ctrl;
if (timer_reload > 0x100000) {
timer_reload >>= 8;
timer_ctrl |= 0x08; /* /256 */
} else if (timer_reload > 0x010000) {
timer_reload >>= 4;
timer_ctrl |= 0x04; /* /16 */
}
/*
* Initialise to a known state (all timers off)
*/
timer0->TimerControl = 0;
timer1->TimerControl = 0;
timer2->TimerControl = 0;
timer1->TimerLoad = timer_reload;
timer1->TimerValue = timer_reload;
timer1->TimerControl = timer_ctrl;
/*
* Make irqs happen for the system timer
*/
setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
gettimeoffset = integrator_gettimeoffset;
}
......@@ -29,6 +29,7 @@ extern void iq80310_init_irq(void);
#ifdef CONFIG_ARCH_IQ80321
extern void iq80321_map_io(void);
extern void iop321_init_irq(void);
extern void iop321_init_time(void);
#endif
#ifdef CONFIG_ARCH_IQ80310
......@@ -67,6 +68,7 @@ MACHINE_START(IQ80321, "Intel IQ80321")
FIXUP(fixup_iop321)
MAPIO(iq80321_map_io)
INITIRQ(iop321_init_irq)
INITTIME(iop321_init_time)
MACHINE_END
#else
......
......@@ -23,7 +23,9 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
static unsigned long iop321_gettimeoffset(void)
{
......@@ -61,27 +63,26 @@ iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr));
do_timer(regs);
timer_tick(regs);
return IRQ_HANDLED;
}
extern unsigned long (*gettimeoffset)(void);
static struct irqaction timer_irq = {
.name = "timer",
static struct irqaction iop321_timer_irq = {
.name = "IOP321 Timer Tick",
.handler = iop321_timer_interrupt,
.flags = SA_INTERRUPT
};
extern int setup_arm_irq(int, struct irqaction*);
void __init time_init(void)
void __init iop321_init_time(void)
{
u32 timer_ctl;
u32 latch = LATCH;
gettimeoffset = iop321_gettimeoffset;
setup_irq(IRQ_IOP321_TIMER0, &timer_irq);
setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq);
timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD |
IOP321_TMR_RATIO_1_1;
......
......@@ -36,6 +36,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
/*************************************************************************
......@@ -227,24 +228,22 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs
* Catch up with the real idea of time
*/
do {
do_timer(regs);
timer_tick(regs);
last_jiffy_time += LATCH;
} while((*IXP4XX_OSTS - last_jiffy_time) > LATCH);
return IRQ_HANDLED;
}
extern unsigned long (*gettimeoffset)(void);
static struct irqaction timer_irq = {
static struct irqaction ixp4xx_timer_irq = {
.name = "IXP4xx Timer Tick",
.flags = SA_INTERRUPT
.flags = SA_INTERRUPT,
.handler = ixp4xx_timer_interrupt
};
void __init time_init(void)
void __init ixp4xx_init_time(void)
{
gettimeoffset = ixp4xx_gettimeoffset;
timer_irq.handler = ixp4xx_timer_interrupt;
/* Clear Pending Interrupt by writing '1' to it */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
......@@ -257,7 +256,7 @@ void __init time_init(void)
last_jiffy_time = 0;
/* Connect the interrupt handler and enable the interrupt */
setup_irq(IRQ_IXP4XX_TIMER1, &timer_irq);
setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
}
......@@ -84,6 +84,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering IXP4XX Coyote Development Platform")
IXP4XX_PERIPHERAL_BASE_VIRT)
MAPIO(coyote_map_io)
INITIRQ(ixp4xx_init_irq)
INITTIME(ixp4xx_init_time)
BOOT_PARAMS(0x0100)
INIT_MACHINE(coyote_init)
MACHINE_END
......
......@@ -113,6 +113,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
IXP4XX_PERIPHERAL_BASE_VIRT)
MAPIO(ixdp425_map_io)
INITIRQ(ixp4xx_init_irq)
INITTIME(ixp4xx_init_time)
BOOT_PARAMS(0x0100)
INIT_MACHINE(ixdp425_init)
MACHINE_END
......@@ -123,6 +124,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
IXP4XX_PERIPHERAL_BASE_VIRT)
MAPIO(ixdp425_map_io)
INITIRQ(ixp4xx_init_irq)
INITTIME(ixp4xx_init_time)
BOOT_PARAMS(0x0100)
INIT_MACHINE(ixdp425_init)
MACHINE_END
......@@ -140,6 +142,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
IXP4XX_PERIPHERAL_BASE_VIRT)
MAPIO(ixdp425_map_io)
INITIRQ(ixp4xx_init_irq)
INITTIME(ixp4xx_init_time)
BOOT_PARAMS(0x0100)
INIT_MACHINE(ixdp425_init)
MACHINE_END
......
......@@ -84,6 +84,7 @@ MACHINE_START(PRPMC1100, "Motorola PrPMC1100")
IXP4XX_PERIPHERAL_BASE_VIRT)
MAPIO(prpmc1100_map_io)
INITIRQ(ixp4xx_init_irq)
INITTIME(ixp4xx_init_time)
BOOT_PARAMS(0x0100)
INIT_MACHINE(prpmc1100_init)
MACHINE_END
......
......@@ -4,7 +4,7 @@
# Object file lists.
obj-y := fiq.o
obj-y := fiq.o time.o
# generic.o
obj-$(CONFIG_MACH_KEV7A400) += arch-kev7a400.o irq-lh7a400.o
obj-$(CONFIG_MACH_LPD7A400) += arch-lpd7a40x.o ide-lpd7a40x.o irq-lh7a400.o
......
......@@ -25,6 +25,7 @@
/* This function calls the board specific IRQ initialization function. */
extern void lh7a400_init_irq (void);
extern void lh7a40x_init_time (void);
static struct map_desc kev7a400_io_desc[] __initdata = {
{ IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
......@@ -108,4 +109,5 @@ MACHINE_START (KEV7A400, "Sharp KEV7a400")
BOOT_PARAMS (0xc0000100)
MAPIO (kev7a400_map_io)
INITIRQ (lh7a400_init_irq)
INITTIME (lh7a40x_init_time)
MACHINE_END
......@@ -280,6 +280,7 @@ MACHINE_END
#ifdef CONFIG_MACH_LPD7A404
extern void lh7a404_init_irq (void);
extern void lh7a40x_init_time (void);
MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
MAINTAINER ("Marc Singer")
......@@ -287,6 +288,7 @@ MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
BOOT_PARAMS (0xc0000100)
MAPIO (lpd7a400_map_io)
INITIRQ (lh7a404_init_irq)
INITTIME (lh7a40x_init_time)
INIT_MACHINE (lpd7a40x_init)
MACHINE_END
......
/* include/asm-arm/arch-lh7a40x/time.h
/*
* arch/arm/mach-lh7a40x/time.c
*
* Copyright (C) 2004 Logic Product Development
*
......@@ -7,6 +8,18 @@
* version 2 as published by the Free Software Foundation.
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
#if HZ < 100
# define TIMER_CONTROL TIMER_CONTROL1
......@@ -28,24 +41,25 @@ static irqreturn_t
lh7a40x_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
TIMER_EOI = 0;
do_profile (regs);
do_leds();
do_set_rtc();
do_timer (regs);
timer_tick(regs);
return IRQ_HANDLED;
}
void __init time_init(void)
static struct irqaction lh7a40x_timer_irq = {
.name = "LHA740x Timer Tick",
.flags = SA_INTERRUPT,
.handler = lh7a40x_timer_interrupt
};
void __init lh7a40x_init_time(void)
{
/* Stop/disable all timers */
TIMER_CONTROL1 = 0;
TIMER_CONTROL2 = 0;
TIMER_CONTROL3 = 0;
timer_irq.handler = lh7a40x_timer_interrupt;
timer_irq.flags |= SA_INTERRUPT;
setup_irq (TIMER_IRQ, &timer_irq);
setup_irq (TIMER_IRQ, &lh7a40x_timer_irq);
TIMER_LOAD = TIMER_CONSTANT;
TIMER_CONTROL = TIMER_MODE;
......
......@@ -3,7 +3,7 @@
#
# Common support
obj-y := common.o irq.o dma.o clocks.o mux.o bus.o gpio.o
obj-y := common.o irq.o dma.o clocks.o mux.o bus.o gpio.o time.o
obj-m :=
obj-n :=
obj- :=
......
......@@ -65,6 +65,11 @@ static void __init omap_generic_map_io(void)
omap_map_io();
}
static void __init omap_generic_init_time(void)
{
omap_init_time();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP-1510/1610/1710")
MAINTAINER("Tony Lindgren <tony@atomide.com>")
BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
......@@ -72,4 +77,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP-1510/1610/1710")
MAPIO(omap_generic_map_io)
INITIRQ(omap_generic_init_irq)
INIT_MACHINE(omap_generic_init)
INITTIME(omap_generic_init_time)
MACHINE_END
......@@ -156,5 +156,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
BOOT_PARAMS(0x10000100)
MAPIO(innovator_map_io)
INITIRQ(innovator_init_irq)
INITTIME(omap_init_time)
INIT_MACHINE(innovator_init)
MACHINE_END
......@@ -94,5 +94,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
BOOT_PARAMS(0x10000100)
MAPIO(osk_map_io)
INITIRQ(osk_init_irq)
INITTIME(omap_init_time)
INIT_MACHINE(osk_init)
MACHINE_END
......@@ -111,5 +111,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
BOOT_PARAMS(0x10000100)
MAPIO(omap_perseus2_map_io)
INITIRQ(omap_perseus2_init_irq)
INITTIME(omap_init_time)
INIT_MACHINE(omap_perseus2_init)
MACHINE_END
......@@ -28,6 +28,7 @@
#define __ARCH_ARM_MACH_OMAP_COMMON_H
extern void omap_map_io(void);
extern void omap_init_time(void);
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
......
/*
* linux/include/asm-arm/arch-omap/time.h
* arch/arm/mach-omap/time.c
*
* 32kHz timer definition
* OMAP Timer Tick
*
* Copyright (C) 2000 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
......@@ -26,8 +26,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#if !defined(__ASM_ARCH_OMAP_TIME_H)
#define __ASM_ARCH_OMAP_TIME_H
#include <linux/config.h>
#include <linux/delay.h>
......@@ -37,6 +35,7 @@
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/arch/clocks.h>
#ifndef __instrument
......@@ -162,14 +161,14 @@ unsigned long __noinstrument machinecycles_to_usecs(unsigned long mputicks)
*/
static unsigned long systimer_mark;
static unsigned long omap1510_gettimeoffset(void)
static unsigned long omap_gettimeoffset(void)
{
/* Return elapsed usecs since last system timer ISR */
return machinecycles_to_usecs(do_getmachinecycles() - systimer_mark);
}
static irqreturn_t
omap1510_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
omap_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long now, ilatency;
......@@ -184,29 +183,30 @@ omap1510_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
ilatency = MPUTICKS_PER_SEC / 100 - read_mputimer2();
systimer_mark = now - ilatency;
do_leds();
do_timer(regs);
do_profile(regs);
timer_tick(regs);
return IRQ_HANDLED;
}
void __init time_init(void)
static struct irqaction omap_timer_irq = {
.name = "OMAP Timer Tick",
.flags = SA_INTERRUPT,
.handler = omap_timer_interrupt
};
void __init omap_init_time(void)
{
/* Since we don't call request_irq, we must init the structure */
gettimeoffset = omap1510_gettimeoffset;
gettimeoffset = omap_gettimeoffset;
timer_irq.handler = omap1510_timer_interrupt;
timer_irq.flags = SA_INTERRUPT;
#ifdef OMAP1510_USE_32KHZ_TIMER
timer32k_write(TIMER32k_CR, 0x0);
timer32k_write(TIMER32k_TVR,TIMER32k_PERIOD);
setup_irq(INT_OS_32kHz_TIMER, &timer_irq);
setup_irq(INT_OS_32kHz_TIMER, &omap_timer_irq);
start_timer32k();
#else
setup_irq(INT_TIMER2, &timer_irq);
setup_irq(INT_TIMER2, &omap_timer_irq);
start_mputimer2(MPUTICKS_PER_SEC / 100 - 1);
#endif
}
#endif
......@@ -3,7 +3,7 @@
#
# Common support (must be linked before board specific support)
obj-y += generic.o irq.o dma.o
obj-y += generic.o irq.o dma.o time.o
obj-$(CONFIG_PXA25x) += pxa25x.o
obj-$(CONFIG_PXA27x) += pxa27x.o
......
......@@ -198,10 +198,26 @@ static struct platform_device pxafb_device = {
.resource = pxafb_resources,
};
static struct platform_device ffuart_device = {
.name = "pxa2xx-uart",
.id = 0,
};
static struct platform_device btuart_device = {
.name = "pxa2xx-uart",
.id = 1,
};
static struct platform_device stuart_device = {
.name = "pxa2xx-uart",
.id = 2,
};
static struct platform_device *devices[] __initdata = {
&pxamci_device,
&udc_device,
&pxafb_device,
&ffuart_device,
&btuart_device,
&stuart_device,
};
static int __init pxa_init(void)
......
......@@ -11,6 +11,7 @@
extern void __init pxa_map_io(void);
extern void __init pxa_init_irq(void);
extern void __init pxa_init_time(void);
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
......
......@@ -118,5 +118,6 @@ MACHINE_START(PXA_IDP, "Accelent Xscale IDP")
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
MAPIO(idp_map_io)
INITIRQ(idp_init_irq)
INITTIME(pxa_init_time)
INIT_MACHINE(idp_init)
MACHINE_END
......@@ -220,5 +220,6 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
MAPIO(lubbock_map_io)
INITIRQ(lubbock_init_irq)
INITTIME(pxa_init_time)
INIT_MACHINE(lubbock_init)
MACHINE_END
......@@ -137,5 +137,6 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
MAPIO(mainstone_map_io)
INITIRQ(mainstone_init_irq)
INITTIME(pxa_init_time)
INIT_MACHINE(mainstone_init)
MACHINE_END
/*
* linux/include/asm-arm/arch-pxa/time.h
* arch/arm/mach-pxa/time.c
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
......@@ -10,6 +10,24 @@
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
static inline unsigned long pxa_get_rtc_time(void)
{
......@@ -56,8 +74,6 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
int next_match;
do_profile(regs);
/* Loop until we get ahead of the free running timer.
* This ensures an exact clock tick count and time accuracy.
* IRQs are disabled inside the loop to ensure coherence between
......@@ -74,9 +90,7 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
* exactly one tick period which should be a pretty rare event.
*/
do {
do_leds();
do_set_rtc();
do_timer(regs);
timer_tick(regs);
OSSR = OSSR_M0; /* Clear match on timer 0 */
next_match = (OSMR0 += LATCH);
} while( (signed long)(next_match - OSCR) <= 8 );
......@@ -84,7 +98,13 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
void __init time_init(void)
static struct irqaction pxa_timer_irq = {
.name = "PXA Timer Tick",
.flags = SA_INTERRUPT,
.handler = pxa_timer_interrupt
};
void __init pxa_init_time(void)
{
struct timespec tv;
......@@ -95,10 +115,9 @@ void __init time_init(void)
tv.tv_sec = pxa_get_rtc_time();
do_settimeofday(&tv);
timer_irq.handler = pxa_timer_interrupt;
OSMR0 = 0; /* set initial match at 0 */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &timer_irq);
setup_irq(IRQ_OST0, &pxa_timer_irq);
OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer, force first match */
}
......
......@@ -14,6 +14,8 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <asm/elf.h>
#include <asm/io.h>
......@@ -25,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
extern void rpc_init_irq(void);
......@@ -82,6 +85,31 @@ void __init rpc_map_io(void)
elf_hwcap &= ~HWCAP_HALF;
}
static irqreturn_t
rpc_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction rpc_timer_irq = {
.name = "RiscPC Timer Tick",
.flags = SA_INTERRUPT,
.handler = rpc_timer_interrupt
};
/*
* Set up timer interrupt.
*/
void __init rpc_init_time(void)
{
extern void ioctime_init(void);
ioctime_init();
setup_irq(IRQ_TIMER, &rpc_timer_irq);
}
MACHINE_START(RISCPC, "Acorn-RiscPC")
MAINTAINER("Russell King")
BOOT_MEM(0x10000000, 0x03000000, 0xe0000000)
......@@ -90,4 +118,5 @@ MACHINE_START(RISCPC, "Acorn-RiscPC")
DISABLE_PARPORT(1)
MAPIO(rpc_map_io)
INITIRQ(rpc_init_irq)
INITTIME(rpc_init_time)
MACHINE_END
......@@ -4,7 +4,7 @@
# Object file lists.
obj-y := s3c2410.o irq.o
obj-y := s3c2410.o irq.o time.o
obj-m :=
obj-n :=
obj- :=
......
......@@ -185,10 +185,16 @@ void __init bast_init_irq(void)
}
void __init bast_init_time(void)
{
s3c2410_init_time();
}
MACHINE_START(BAST, "Simtec-BAST")
MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, S3C2410_VA_UART)
BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
MAPIO(bast_map_io)
INITIRQ(bast_init_irq)
INITTIME(bast_init_time)
MACHINE_END
......@@ -91,10 +91,16 @@ void __init ipaq_init_irq(void)
}
void __init ipaq_init_time(void)
{
s3c2410_init_time();
}
MACHINE_START(H1940, "IPAQ-H1940")
MAINTAINER("Ben Dooks <ben@fluff.org>")
BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, S3C2410_VA_UART)
BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
MAPIO(ipaq_map_io)
INITIRQ(ipaq_init_irq)
INITTIME(ipaq_init_time)
MACHINE_END
......@@ -99,6 +99,11 @@ void __init smdk2410_init_irq(void)
s3c2410_init_irq();
}
void __init smdk2410_init_time(void)
{
s3c2401_init_time();
}
MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
* to SMDK2410 */
MAINTAINER("Jonas Dietsche")
......@@ -106,4 +111,5 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
MAPIO(smdk2410_map_io)
INITIRQ(smdk2410_init_irq)
INITTIME(smdk2410_init_time)
MACHINE_END
......@@ -155,10 +155,16 @@ void __init vr1000_init_irq(void)
}
void __init vr1000_init_time(void)
{
s3c2401_init_time();
}
MACHINE_START(VR1000, "Simtec-VR1000")
MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, S3C2410_VA_UART)
BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
MAPIO(vr1000_map_io)
INITIRQ(vr1000_init_irq)
INITTIME(vr1000_init_time)
MACHINE_END
......@@ -4,3 +4,5 @@ extern void s3c2410_map_io(struct map_desc *, int count);
extern void s3c2410_init_irq(void);
extern s3c2410_init_time(void);
......@@ -18,15 +18,20 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/arch/map.h>
#include <asm/arch/regs-timer.h>
extern unsigned long (*gettimeoffset)(void);
#include <asm/mach/time.h>
static unsigned long timer_startval;
static unsigned long timer_ticks_usec;
......@@ -69,25 +74,24 @@ static unsigned long s3c2410_gettimeoffset (void)
static irqreturn_t
s3c2410_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
do_leds();
do_timer(regs);
do_set_rtc();
//s3c2410_rtc_check();
do_profile(regs);
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction s3c2410_timer_irq = {
.name = "S32410 Timer Tick",
.flags = SA_INTERRUPT,
.handler = s3c2410_timer_interrupt
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
/* currently we only use timer4, as it is the only timer which has no
*
* Currently we only use timer4, as it is the only timer which has no
* other function that can be exploited externally
*/
void __init time_init (void)
*/
void __init s3c2410_init_time (void)
{
unsigned long tcon;
unsigned long tcnt;
......@@ -95,7 +99,6 @@ void __init time_init (void)
unsigned long tcfg0;
gettimeoffset = s3c2410_gettimeoffset;
timer_irq.handler = s3c2410_timer_interrupt;
tcnt = 0xffff; /* default value for tcnt */
......@@ -161,7 +164,7 @@ void __init time_init (void)
__raw_writel(tcnt, S3C2410_TCNTB(4));
__raw_writel(tcnt, S3C2410_TCMPB(4));
setup_irq(IRQ_TIMER4, &timer_irq);
setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
/* start the timer running */
tcon |= S3C2410_TCON_T4START;
......
......@@ -147,4 +147,5 @@ MACHINE_START(ADSBITSY, "ADS Bitsy")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(adsbitsy_map_io)
INITIRQ(adsbitsy_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -324,5 +324,6 @@ MACHINE_START(ASSABET, "Intel-Assabet")
FIXUP(fixup_assabet)
MAPIO(assabet_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
INIT_MACHINE(assabet_init)
MACHINE_END
......@@ -245,4 +245,5 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
BOOT_PARAMS(0xc0000100)
MAPIO(badge4_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -37,4 +37,5 @@ MACHINE_START(BRUTUS, "Intel Brutus (SA1100 eval board)")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(brutus_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -92,4 +92,5 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(cerf_map_io)
INITIRQ(cerf_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -35,4 +35,5 @@ MACHINE_START(EMPEG, "empeg MP3 Car Audio Player")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(empeg_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -183,5 +183,6 @@ MACHINE_START(FLEXANET, "FlexaNet")
BOOT_PARAMS(0xc0000100)
MAPIO(flexanet_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -77,4 +77,5 @@ MACHINE_START(FREEBIRD, "Freebird-HPC-1.1")
#endif
MAPIO(freebird_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -6,6 +6,7 @@
extern void __init sa1100_map_io(void);
extern void __init sa1100_init_irq(void);
extern void __init sa1100_init_time(void);
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
......
......@@ -198,4 +198,5 @@ MACHINE_START(GRAPHICSCLIENT, "ADS GraphicsClient")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(graphicsclient_map_io)
INITIRQ(graphicsclient_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -287,4 +287,5 @@ MACHINE_START(GRAPHICSMASTER, "ADS GraphicsMaster")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(graphicsmaster_map_io)
INITIRQ(graphicsmaster_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -286,6 +286,7 @@ MACHINE_START(H3100, "Compaq iPAQ H3100")
BOOT_PARAMS(0xc0000100)
MAPIO(h3100_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
#endif /* CONFIG_SA1100_H3100 */
......@@ -400,6 +401,7 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
BOOT_PARAMS(0xc0000100)
MAPIO(h3600_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
#endif /* CONFIG_SA1100_H3600 */
......@@ -783,6 +785,7 @@ MACHINE_START(H3800, "Compaq iPAQ H3800")
BOOT_PARAMS(0xc0000100)
MAPIO(h3800_map_io)
INITIRQ(h3800_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
#endif /* CONFIG_SA1100_H3800 */
......@@ -174,4 +174,5 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board")
BOOT_PARAMS(0xc0000100)
MAPIO(hackkit_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -81,4 +81,5 @@ MACHINE_START(HUW_WEBPANEL, "HuW-Webpanel")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(huw_webpanel_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -37,4 +37,5 @@ MACHINE_START(ITSY, "Compaq Itsy")
BOOT_PARAMS(0xc0000100)
MAPIO(itsy_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -101,4 +101,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
BOOT_PARAMS(0xc0000100)
MAPIO(jornada720_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -43,4 +43,5 @@ MACHINE_START(LART, "LART")
BOOT_PARAMS(0xc0000100)
MAPIO(lart_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -49,4 +49,5 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine")
FIXUP(fixup_nanoengine)
MAPIO(nanoengine_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -59,4 +59,5 @@ MACHINE_START(OMNIMETER, "OmniMeter")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(omnimeter_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -40,4 +40,5 @@ MACHINE_START(PANGOLIN, "Dialogue-Pangolin")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(pangolin_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -112,4 +112,5 @@ MACHINE_START(PFS168, "Tulsa")
BOOT_PARAMS(0xc0000100)
MAPIO(pfs168_map_io)
INITIRQ(pfs168_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -31,4 +31,5 @@ MACHINE_START(PLEB, "PLEB")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(pleb_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -41,4 +41,5 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
BOOT_PARAMS(0xc0000100)
MAPIO(shannon_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -27,4 +27,5 @@ MACHINE_START(SHERMAN, "Blazie Engineering Sherman")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(sherman_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -231,4 +231,5 @@ MACHINE_START(SIMPAD, "Simpad")
BOOT_PARAMS(0xc0000100)
MAPIO(simpad_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -331,6 +331,7 @@ MACHINE_START(STORK, "Stork Technologies prototype")
BOOT_PARAMS(0xc0000100)
MAPIO(stork_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......
......@@ -470,4 +470,5 @@ MACHINE_START(PT_SYSTEM3, "PT System 3")
BOOT_PARAMS(0xc0000100)
MAPIO(system3_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -78,19 +78,21 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
unsigned int next_match;
do {
do_leds();
do_timer(regs);
timer_tick(regs);
OSSR = OSSR_M0; /* Clear match on timer 0 */
next_match = (OSMR0 += LATCH);
do_set_rtc();
} while ((signed long)(next_match - OSCR) <= 0);
do_profile(regs);
return IRQ_HANDLED;
}
void __init time_init(void)
static struct irqaction sa1100_timer_irq = {
.name = "SA11xx Timer Tick",
.flags = SA_INTERRUPT,
.handler = sa1100_timer_interrupt
};
void __init sa1100_init_time(void)
{
struct timespec tv;
......@@ -101,10 +103,9 @@ void __init time_init(void)
tv.tv_sec = sa1100_get_rtc_time();
do_settimeofday(&tv);
timer_irq.handler = sa1100_timer_interrupt;
OSMR0 = 0; /* set initial match at 0 */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &timer_irq);
setup_irq(IRQ_OST0, &sa1100_timer_irq);
OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer, force first match */
}
......
......@@ -228,4 +228,5 @@ MACHINE_START(TRIZEPS, "TRIZEPS")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(trizeps_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -89,4 +89,5 @@ MACHINE_START(XP860, "XP860")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(xp860_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -91,4 +91,5 @@ MACHINE_START(YOPY, "Yopy")
BOOT_PARAMS(0xc0000100)
MAPIO(yopy_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
......@@ -5,13 +5,18 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/param.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
extern void shark_init_irq(void);
......@@ -24,10 +29,43 @@ static void __init shark_map_io(void)
iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc));
}
#define IRQ_TIMER 0
#define HZ_TIME ((1193180 + HZ/2) / HZ)
static irqreturn_t
shark_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction shark_timer_irq = {
.name = "Shark Timer Tick",
.flags = SA_INTERRUPT,
.handler = shark_timer_interrupt
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
void __init shark_init_time(void)
{
unsigned long flags;
outb(0x34, 0x43); /* binary, mode 0, LSB/MSB, Ch 0 */
outb(HZ_TIME & 0xff, 0x40); /* LSB of count */
outb(HZ_TIME >> 8, 0x40);
setup_irq(IRQ_TIMER, &shark_timer_irq);
}
MACHINE_START(SHARK, "Shark")
MAINTAINER("Alexander Schulz")
BOOT_MEM(0x08000000, 0x40000000, 0xe0000000)
BOOT_PARAMS(0x08003000)
MAPIO(shark_map_io)
INITIRQ(shark_init_irq)
INITTIME(shark_init_time)
MACHINE_END
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment