Commit bc6c1eaa authored by Mauro S. M. Rodrigues's avatar Mauro S. M. Rodrigues Committed by Jeff Kirsher

i40e: Check if transceiver implements DDM before access

Similar to the ixgbe issue fixed in:
655c9141 ("ixgbe: Check DDM existence in transceiver before access)

i40e has the same issue when reading eeprom from SFP's module that comply
with SFF-8472 but not implement the Digital Diagnostic Monitoring (DDM)
interface described in it. The existence of such area is specified by bit
6 of byte 92, set to 1 if implemented.

Without this patch, due to not checking this bit i40e fails to read SFP
module's eeprom with the follow message:

ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
Signed-off-by: default avatar"Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 33b16568
......@@ -5137,6 +5137,12 @@ static int i40e_get_module_info(struct net_device *netdev,
/* Module is not SFF-8472 compliant */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
} else if (!(sff8472_swap & I40E_MODULE_SFF_DDM_IMPLEMENTED)) {
/* Module is SFF-8472 compliant but doesn't implement
* Digital Diagnostic Monitoring (DDM).
*/
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8472;
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
......
......@@ -443,6 +443,7 @@ struct i40e_nvm_access {
#define I40E_MODULE_SFF_8472_COMP 0x5E
#define I40E_MODULE_SFF_8472_SWAP 0x5C
#define I40E_MODULE_SFF_ADDR_MODE 0x04
#define I40E_MODULE_SFF_DDM_IMPLEMENTED 0x40
#define I40E_MODULE_TYPE_QSFP_PLUS 0x0D
#define I40E_MODULE_TYPE_QSFP28 0x11
#define I40E_MODULE_QSFP_MAX_LEN 640
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment