Commit bc6d2d04 authored by Johan Hedberg's avatar Johan Hedberg Committed by Marcel Holtmann

Bluetooth: Remove unneeded mgmt_discoverable function

Since the HCISETSCAN ioctl is the only non-mgmt user we care about for
setting the right discoverable state we can simply do the necessary
updates in the ioctl handler function instead. This then allows the
removal of the mgmt_discoverable function and should simplify that state
handling considerably.
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 123abc08
......@@ -1286,8 +1286,8 @@ void mgmt_index_added(struct hci_dev *hdev);
void mgmt_index_removed(struct hci_dev *hdev);
void mgmt_set_powered_failed(struct hci_dev *hdev, int err);
int mgmt_powered(struct hci_dev *hdev, u8 powered);
int mgmt_update_adv_data(struct hci_dev *hdev);
void mgmt_discoverable_timeout(struct hci_dev *hdev);
void mgmt_discoverable(struct hci_dev *hdev, u8 discoverable);
void mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status);
void mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key,
bool persistent);
......
......@@ -2657,7 +2657,7 @@ int hci_dev_reset_stat(__u16 dev)
static void hci_update_scan_state(struct hci_dev *hdev, u8 scan)
{
bool conn_changed;
bool conn_changed, discov_changed;
BT_DBG("%s scan 0x%02x", hdev->name, scan);
......@@ -2668,11 +2668,27 @@ static void hci_update_scan_state(struct hci_dev *hdev, u8 scan)
conn_changed = test_and_clear_bit(HCI_CONNECTABLE,
&hdev->dev_flags);
if ((scan & SCAN_INQUIRY)) {
discov_changed = !test_and_set_bit(HCI_DISCOVERABLE,
&hdev->dev_flags);
} else {
clear_bit(HCI_LIMITED_DISCOVERABLE, &hdev->dev_flags);
discov_changed = test_and_clear_bit(HCI_DISCOVERABLE,
&hdev->dev_flags);
}
if (!test_bit(HCI_MGMT, &hdev->dev_flags))
return;
if (conn_changed)
if (conn_changed || discov_changed) {
/* In case this was disabled through mgmt */
set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags);
if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags))
mgmt_update_adv_data(hdev);
mgmt_new_settings(hdev);
}
}
int hci_dev_cmd(unsigned int cmd, void __user *arg)
......@@ -2736,8 +2752,8 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg)
err = hci_req_sync(hdev, hci_scan_req, dr.dev_opt,
HCI_INIT_TIMEOUT);
/* Ensure that the connectable state gets correctly
* modified as this was a non-mgmt change.
/* Ensure that the connectable and discoverable states
* get correctly modified as this was a non-mgmt change.
*/
if (!err)
hci_update_scan_state(hdev, dr.dev_opt);
......
......@@ -296,7 +296,6 @@ static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
__u8 param;
int old_pscan, old_iscan;
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
......@@ -315,23 +314,15 @@ static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb)
goto done;
}
/* We need to ensure that we set this back on if someone changed
* the scan mode through a raw HCI socket.
*/
set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags);
old_pscan = test_and_clear_bit(HCI_PSCAN, &hdev->flags);
old_iscan = test_and_clear_bit(HCI_ISCAN, &hdev->flags);
if (param & SCAN_INQUIRY) {
if (param & SCAN_INQUIRY)
set_bit(HCI_ISCAN, &hdev->flags);
if (!old_iscan)
mgmt_discoverable(hdev, 1);
} else if (old_iscan)
mgmt_discoverable(hdev, 0);
else
clear_bit(HCI_ISCAN, &hdev->flags);
if (param & SCAN_PAGE)
set_bit(HCI_PSCAN, &hdev->flags);
else
clear_bit(HCI_ISCAN, &hdev->flags);
done:
hci_dev_unlock(hdev);
......
......@@ -906,6 +906,16 @@ static void update_adv_data(struct hci_request *req)
hci_req_add(req, HCI_OP_LE_SET_ADV_DATA, sizeof(cp), &cp);
}
int mgmt_update_adv_data(struct hci_dev *hdev)
{
struct hci_request req;
hci_req_init(&req, hdev);
update_adv_data(&req);
return hci_req_run(&req, NULL);
}
static void create_eir(struct hci_dev *hdev, u8 *data)
{
u8 *ptr = data;
......@@ -1743,7 +1753,7 @@ static void set_connectable_complete(struct hci_dev *hdev, u8 status)
{
struct pending_cmd *cmd;
struct mgmt_mode *cp;
bool changed;
bool conn_changed, discov_changed;
BT_DBG("status 0x%02x", status);
......@@ -1760,15 +1770,23 @@ static void set_connectable_complete(struct hci_dev *hdev, u8 status)
}
cp = cmd->param;
if (cp->val)
changed = !test_and_set_bit(HCI_CONNECTABLE, &hdev->dev_flags);
else
changed = test_and_clear_bit(HCI_CONNECTABLE, &hdev->dev_flags);
if (cp->val) {
conn_changed = !test_and_set_bit(HCI_CONNECTABLE,
&hdev->dev_flags);
discov_changed = false;
} else {
conn_changed = test_and_clear_bit(HCI_CONNECTABLE,
&hdev->dev_flags);
discov_changed = test_and_clear_bit(HCI_DISCOVERABLE,
&hdev->dev_flags);
}
send_settings_rsp(cmd->sk, MGMT_OP_SET_CONNECTABLE, hdev);
if (changed) {
if (conn_changed || discov_changed) {
new_settings(hdev, cmd->sk);
if (discov_changed)
mgmt_update_adv_data(hdev);
hci_update_background_scan(hdev);
}
......@@ -6031,43 +6049,6 @@ void mgmt_discoverable_timeout(struct hci_dev *hdev)
hci_dev_unlock(hdev);
}
void mgmt_discoverable(struct hci_dev *hdev, u8 discoverable)
{
bool changed;
/* Nothing needed here if there's a pending command since that
* commands request completion callback takes care of everything
* necessary.
*/
if (mgmt_pending_find(MGMT_OP_SET_DISCOVERABLE, hdev))
return;
/* Powering off may clear the scan mode - don't let that interfere */
if (!discoverable && mgmt_pending_find(MGMT_OP_SET_POWERED, hdev))
return;
if (discoverable) {
changed = !test_and_set_bit(HCI_DISCOVERABLE, &hdev->dev_flags);
} else {
clear_bit(HCI_LIMITED_DISCOVERABLE, &hdev->dev_flags);
changed = test_and_clear_bit(HCI_DISCOVERABLE, &hdev->dev_flags);
}
if (changed) {
struct hci_request req;
/* In case this change in discoverable was triggered by
* a disabling of connectable there could be a need to
* update the advertising flags.
*/
hci_req_init(&req, hdev);
update_adv_data(&req);
hci_req_run(&req, NULL);
new_settings(hdev, NULL);
}
}
void mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status)
{
u8 mgmt_err = mgmt_status(status);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment