Merge bk://kernel.bkbits.net/davem/net-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

Documentation/kernel-parameters.txt

@@ -652,6 +652,9 @@ running once the system is up.
 	opl3sa2=	[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
  
+	oprofile.timer=	[HW]
+			Use timer interrupt instead of performance counters
+
 	optcd=		[HW,CD]
 			Format: <io>
 

arch/m68knommu/platform/5282/pit.c

+/***************************************************************************/
+
+/*
+ *	pit.c -- Motorola ColdFire PIT timer. Currently this type of
+ *	         hardware timer only exists in the Motorola ColdFire
+ *		 5282 CPU.
+ *
+ *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ *
+ */
+
+/***************************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <asm/irq.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+void coldfire_pit_tick(void)
+{
+	volatile struct mcfpit *tp;
+
+	/* Reset the ColdFire timer */
+	tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
+	tp->pcsr |= MCFPIT_PCSR_PIF;
+}
+
+/***************************************************************************/
+
+void coldfire_pit_init(void (*handler)(int, void *, struct pt_regs *))
+{
+	volatile unsigned char *icrp;
+	volatile unsigned long *imrp;
+	volatile struct mcfpit *tp;
+
+	request_irq(64+55, handler, SA_INTERRUPT, "ColdFire Timer", NULL);
+
+	icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
+		MCFINTC_ICR0 + MCFINT_PIT1);
+	*icrp = 0x2b; /* PIT1 with level 5, priority 3 */
+
+	imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	*imrp &= ~(1 << (55 - 32));
+
+	/* Set up PIT timer 1 as poll clock */
+	tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
+	tp->pcsr = MCFPIT_PCSR_DISABLE;
+
+	tp->pmr = ((MCF_CLK / 2) / 64) / HZ;
+	tp->pcsr = MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | MCFPIT_PCSR_OVW |
+		MCFPIT_PCSR_RLD | MCFPIT_PCSR_CLK64;
+}
+
+/***************************************************************************/
+
+unsigned long coldfire_pit_offset(void)
+{
+	volatile struct mcfpit *tp;
+	volatile unsigned long *ipr;
+	unsigned long pmr, pcntr, offset;
+
+	tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
+	ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IPRH);
+
+	pmr = tp->pmr;
+	pcntr = tp->pcntr;
+
+	/*
+	 * If we are still in the first half of the upcount and a
+	 * timer interupt is pending, then add on a ticks worth of time.
+	 */
+	offset = ((pcntr * (1000000 / HZ)) / pmr);
+	if ((offset < (1000000 / HZ / 2)) && (*ipr & (1 << (55 - 32))))
+		offset += 1000000 / HZ;
+	return offset;	
+}
+
+/***************************************************************************/

arch/m68knommu/platform/5307/Makefile

@@ -16,8 +16,13 @@ ifdef CONFIG_FULLDEBUG
 AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
 endif
 
-obj-$(CONFIG_COLDFIRE)	+= entry.o timers.o vectors.o
-obj-$(CONFIG_M5307)	+= config.o
+obj-$(CONFIG_COLDFIRE)	+= entry.o vectors.o
+obj-$(CONFIG_M5206)	+= timers.o
+obj-$(CONFIG_M5206e)	+= timers.o
+obj-$(CONFIG_M5249)	+= timers.o
+obj-$(CONFIG_M5272)	+= timers.o
+obj-$(CONFIG_M5307)	+= config.o timers.o
+obj-$(CONFIG_M5407)	+= timers.o
 
 ifeq ($(CONFIG_M5307),y)
 extra-y := $(BOARD)/crt0_$(MODEL).o

drivers/net/Kconfig

@@ -1870,7 +1870,7 @@ config 68360_ENET
 
 config FEC
 	bool "FEC ethernet controller (of ColdFire 5272)"
-	depends on M5272
+	depends on M5272 || M5282
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on the Motorola ColdFire 5272 processor.

drivers/net/Makefile

@@ -11,6 +11,7 @@ endif
 obj-$(CONFIG_E100) += e100/
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_IXGB) += ixgb/
+obj-$(CONFIG_BONDING) += bonding/
 
 #
 # link order important here
@@ -108,7 +109,6 @@ ifeq ($(CONFIG_SLIP_COMPRESSED),y)
 endif
 
 obj-$(CONFIG_DUMMY) += dummy.o
-obj-$(CONFIG_BONDING) += bonding.o
 obj-$(CONFIG_DE600) += de600.o
 obj-$(CONFIG_DE620) += de620.o
 obj-$(CONFIG_AT1500) += lance.o

drivers/net/au1000_eth.c

@@ -675,37 +675,24 @@ au1000_probe1(struct net_device *dev, long ioaddr, int irq, int port_num)
 	char *pmac, *argptr;
 	char ethaddr[6];
 
-	if (!request_region(ioaddr, MAC_IOSIZE, "Au1000 ENET")) {
+	if (!request_region(ioaddr, MAC_IOSIZE, "Au1000 ENET"))
 		 return -ENODEV;
-	}
 
 	if (version_printed++ == 0) printk(version);
 
-	if (!dev) {
-		dev = init_etherdev(0, sizeof(struct au1000_private));
-	}
+	if (!dev)
+		dev = init_etherdev(NULL, sizeof(struct au1000_private));
+
 	if (!dev) {
 		printk (KERN_ERR "au1000 eth: init_etherdev failed\n");  
+		release_region(ioaddr, MAC_IOSIZE);
 		return -ENODEV;
 	}
 
 	printk("%s: Au1xxx ethernet found at 0x%lx, irq %d\n", 
 			dev->name, ioaddr, irq);
 
-	/* Initialize our private structure */
-	if (dev->priv == NULL) {
-		aup = (struct au1000_private *) 
-			kmalloc(sizeof(*aup), GFP_KERNEL);
-		if (aup == NULL) {
-			retval = -ENOMEM;
-			goto free_region;
-		}
-		dev->priv = aup;
-	}
-
 	aup = dev->priv;
-	memset(aup, 0, sizeof(*aup));
-
 
 	/* Allocate the data buffers */
 	aup->vaddr = (u32)dma_alloc(MAX_BUF_SIZE * 
@@ -834,8 +821,6 @@ au1000_probe1(struct net_device *dev, long ioaddr, int irq, int port_num)
 	if (aup->vaddr) 
 		dma_free((void *)aup->vaddr, 
 				MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS));
-	if (dev->priv != NULL)
-		kfree(dev->priv);
 	printk(KERN_ERR "%s: au1000_probe1 failed.  Returns %d\n",
 	       dev->name, retval);
 	kfree(dev);
@@ -1003,15 +988,15 @@ static int au1000_close(struct net_device *dev)
 	spin_lock_irqsave(&aup->lock, flags);
 	
 	/* stop the device */
-	if (netif_device_present(dev)) {
+	if (netif_device_present(dev))
 		netif_stop_queue(dev);
-	}
 
 	/* disable the interrupt */
 	free_irq(dev->irq, dev);
 	spin_unlock_irqrestore(&aup->lock, flags);
 
 	reset_mac(dev);
+	kfree(dev);
 	MOD_DEC_USE_COUNT;
 	return 0;
 }

drivers/net/bmac.c

@@ -1407,7 +1407,6 @@ static void __init bmac_probe1(struct device_node *bmac, int is_bmac_plus)
 	skb_queue_head_init(bp->queue);
 
 	init_timer(&bp->tx_timeout);
-	/*     bp->timeout_active = 0; */
 
 	ret = request_irq(dev->irq, bmac_misc_intr, 0, "BMAC-misc", dev);
 	if (ret) {

drivers/net/bonding/Makefile

+#
+# Makefile for the Ethernet Bonding driver
+#
+
+obj-$(CONFIG_BONDING) += bonding.o
+
+bonding-objs := bond_main.o bond_3ad.o bond_alb.o
+

drivers/net/cs89x0.h

@@ -385,11 +385,11 @@
 #define A_CNF_10B_T 0x0001
 #define A_CNF_AUI 0x0002
 #define A_CNF_10B_2 0x0004
-#define A_CNF_MEDIA_TYPE 0x0060
-#define A_CNF_MEDIA_AUTO 0x0000
+#define A_CNF_MEDIA_TYPE 0x0070
+#define A_CNF_MEDIA_AUTO 0x0070
 #define A_CNF_MEDIA_10B_T 0x0020
 #define A_CNF_MEDIA_AUI 0x0040
-#define A_CNF_MEDIA_10B_2 0x0060
+#define A_CNF_MEDIA_10B_2 0x0010
 #define A_CNF_DC_DC_POLARITY 0x0080
 #define A_CNF_NO_AUTO_POLARITY 0x2000
 #define A_CNF_LOW_RX_SQUELCH 0x4000

drivers/net/tlan.c

@@ -1537,7 +1537,7 @@ u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
 				t = (void *) skb_put( new_skb, TLAN_MAX_FRAME_SIZE );
 				head_list->buffer[0].address = pci_map_single(priv->pciDev, new_skb->data, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
 				head_list->buffer[8].address = (u32) t;
-#ifdef __LP64__
+#if BITS_PER_LONG==64
 #error "Not 64bit clean"
 #endif				
 				head_list->buffer[9].address = (u32) new_skb;