Commit bcd9b43e authored by Fabrice Gasnier's avatar Fabrice Gasnier Committed by Alexandre TORGUE

ARM: dts: stm32: Enable dma by default on stm32f4 adc

Configure STM32F4 ADC to use dma by default.
Signed-off-by: default avatarFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: default avatarAlexandre TORGUE <alexandre.torgue@st.com>
parent 4cc62747
...@@ -450,6 +450,8 @@ adc1: adc@0 { ...@@ -450,6 +450,8 @@ adc1: adc@0 {
clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
interrupt-parent = <&adc>; interrupt-parent = <&adc>;
interrupts = <0>; interrupts = <0>;
dmas = <&dma2 0 0 0x400 0x0>;
dma-names = "rx";
status = "disabled"; status = "disabled";
}; };
...@@ -460,6 +462,8 @@ adc2: adc@100 { ...@@ -460,6 +462,8 @@ adc2: adc@100 {
clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>;
interrupt-parent = <&adc>; interrupt-parent = <&adc>;
interrupts = <1>; interrupts = <1>;
dmas = <&dma2 3 1 0x400 0x0>;
dma-names = "rx";
status = "disabled"; status = "disabled";
}; };
...@@ -470,6 +474,8 @@ adc3: adc@200 { ...@@ -470,6 +474,8 @@ adc3: adc@200 {
clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>;
interrupt-parent = <&adc>; interrupt-parent = <&adc>;
interrupts = <2>; interrupts = <2>;
dmas = <&dma2 1 2 0x400 0x0>;
dma-names = "rx";
status = "disabled"; status = "disabled";
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment