Merge mulgrave.(none):/home/jejb/BK/linux-2.5

into mulgrave.(none):/home/jejb/BK/scsi-misc-2.6

Documentation/i2o/README

+
+	Linux I2O Support	(c) Copyright 1999 Red Hat Software
+					and others.
+
+	This program is free software; you can redistribute it and/or
+	modify it under the terms of the GNU General Public License
+	as published by the Free Software Foundation; either version
+	2 of the License, or (at your option) any later version.
+
+AUTHORS (so far)
+
+Alan Cox, Building Number Three Ltd.
+	Core code, SCSI and Block OSMs
+
+Steve Ralston, LSI Logic Corp.
+	Debugging SCSI and Block OSM
+
+Deepak Saxena, Intel Corp.
+	Various core/block extensions
+	/proc interface, bug fixes
+	Ioctl interfaces for control
+	Debugging LAN OSM
+
+Philip Rumpf
+	Fixed assorted dumb SMP locking bugs
+
+Juha Sievanen, University of Helsinki Finland
+	LAN OSM code
+	/proc interface to LAN class
+	Bug fixes
+	Core code extensions
+
+Auvo Häkkinen, University of Helsinki Finland
+	LAN OSM code
+	/Proc interface to LAN class
+	Bug fixes
+	Core code extensions
+
+Taneli Vähäkangas, University of Helsinki Finland
+	Fixes to i2o_config
+
+CREDITS
+
+	This work was made possible by
+
+Red Hat Software
+	Funding for the Building #3 part of the project
+
+Symbios Logic (Now LSI)
+	Host adapters, hints, known to work platforms when I hit
+	compatibility problems
+
+BoxHill Corporation
+	Loan of initial FibreChannel disk array used for development work.
+
+European Comission
+	Funding the work done by the University of Helsinki
+
+SysKonnect
+        Loan of FDDI and Gigabit Ethernet cards
+
+ASUSTeK
+        Loan of I2O motherboard

Documentation/scsi/ChangeLog.megaraid

-### Version 2.00.3
-Wed Jan 29 09:13:44 EST 200 - Atul Mukker <atulm@lsil.com>
-i.	Change the handshake in ISR while acknowledging interrupts. Write the
-	valid interrupt pattern 0x10001234 as soon as it is read from the
-	outdoor register. In existing driver and on certain platform, invalid
-	command ids were being returned.
+Release Date	: Tue Aug 24 09:43:35 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.3.1 (scsi module), 2.20.2.0 (cmm module)
+Older Version	: 2.20.3.0 (scsi module), 2.20.2.0 (cmm module)
 
-	Also, do not wait on status be become 0xFF, since FW can return this
-	status in certain circumstances.
+i.	Function reordering so that inline functions are defined before they
+	are actually used. It is now mandatory for GCC 3.4.1 (current stable)
 
-	Initialize the numstatus field of mailbox to 0xFF so that we can wait
-	on this wait in next interrupt. Firmware does not change its value
-	unless there are some status to be posted
+	Declare some heavy-weight functions to be non-inlined,
+	megaraid_mbox_build_cmd, megaraid_mbox_runpendq,
+	megaraid_mbox_prepare_pthru, megaraid_mbox_prepare_epthru,
+	megaraid_busywait_mbox
 
-ii.	Specify the logical drive number while issuing the RESERVATION_STATUS
+		- Andrew Morton <akpm@osdl.org>, 08.19.2004
+		linux-scsi mailing list
 
-iii.	Reduce the default mailbox busy wait time from 300us to 10us. This is
-	done to avaoid a possible deadlock in FW because of longer bust waits.
+	"Something else to clean up after inclusion: every instance of an
+	inline function is actually rendered as a full function call, because
+	the function is always used before it is defined.  Atul, please
+	re-arrange the code to eliminate the need for most (all) of the
+	function prototypes at the top of each file, and define (not just
+	declare with a prototype) each inline function before its first use"
 
-iv.	The max outstanding commands are reduced to 126 because that't the
-	safest value on all FW.
+		- Matt Domsch <Matt_Domsch@dell.com>, 07.27.2004
+		linux-scsi mailing list
 
-v.	Number of sectors per IO are reduced to 128 (64kb), becuase FW needs
-	resources in special circumstances like check consistency, rebuilds
-	etc.
 
-vi.	max_commands is no longer a module parameter because of iv.
+ii.	Display elapsed time (countdown) while waiting for FW to boot.
 
-### Version: 2.00.2
-i.	Intermediate release with kernel specific code
+iii.	Module compilation reorder in Makefile so that unresolved symbols do
+	not occur when driver is compiled non-modular.
 
+		Patrick J. LoPresti <patl@users.sourceforge.net>, 8.22.2004
+		linux-scsi mailing list
 
-### Version: 2.00.1i
-Wed Dec  4 14:34:51 EST 2002 - Atul Mukker <atulm@lsil.com>
-i.	Making the older IO based controllers to work with this driver
 
+Release Date	: Thu Aug 19 09:58:33 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.3.0 (scsi module), 2.20.2.0 (cmm module)
+Older Version	: 2.20.2.0 (scsi module), 2.20.1.0 (cmm module)
 
-### Version 2.00.1
-Fri Nov 15 10:59:44 EST 2002 - Atul Mukker <atulm@lsil.com>
-i.	Release host lock before issuing internal command to reset
-	reservations in megaraid_reset() and reacquire after internal command
-	is completed.
+i.	When copying the mailbox packets, copy only first 14 bytes (for 32-bit
+	mailboxes) and only first 22 bytes (for 64-bit mailboxes). This is to
+	avoid getting the stale values for busy bit. We want to set the busy
+	bit just before issuing command to the FW.
+
+ii.	In the reset handling, if the reseted command is not owned by the
+	driver, do not (wrongly) print information for the "attached" driver
+	packet.
+
+iii.	Have extended wait when issuing command in synchronous mode. This is
+	required for the cases where the option ROM is disabled and there is
+	no BIOS to start the controller. The FW starts to boot after receiving
+	the first command from the driver. The current driver has 1 second
+	timeout for the synchronous commands, which is far less than what is
+	actually required. We now wait up to MBOX_RESET_TIME (180 seconds) for
+	FW boot process.
+
+iv.	In megaraid_mbox_product_info, clear the mailbox contents completely
+	before preparing the command for inquiry3. This is to ensure that the
+	FW does not get junk values in the command.
+
+v.	Do away with the redundant LSI_CONFIG_COMPAT redefinition for
+	CONFIG_COMPAT. Replace <asm/ioctl32.h> with <linux/ioctl32.h>
+
+		- James Bottomley <James.Bottomley@SteelEye.com>, 08.17.2004
+		 linux-scsi mailing list
+
+vi.	Add support for 64-bit applications. Current drivers assume only
+	32-bit applications, even on 64-bit platforms. Use the "data" and
+	"buffer" fields of the mimd_t structure, instead of embedded 32-bit
+	addresses in application mailbox and passthru structures.
+
+vii.	Move the function declarations for the management module from
+	megaraid_mm.h to megaraid_mm.c
+
+		- Andrew Morton <akpm@osdl.org>, 08.19.2004
+		linux-scsi mailing list
+
+viii.	Change default values for MEGARAID_NEWGEN, MEGARAID_MM, and
+	MEGARAID_MAILBOX to 'n' in Kconfig.megaraid
+
+		- Andrew Morton <akpm@osdl.org>, 08.19.2004
+		linux-scsi mailing list
+
+ix.	replace udelay with msleep
+
+x.	Typos corrected in comments and whitespace adjustments, explicit
+	grouping of expressions.
+
+
+Release Date	: Fri Jul 23 15:22:07 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.2.0 (scsi module), 2.20.1.0 (cmm module)
+Older Version	: 2.20.1.0 (scsi module), 2.20.0.0 (cmm module)
+
+i.	Add PCI ids for Acer ROMB 2E solution
+
+ii.	Add PCI ids for I4
+
+iii.	Typo corrected for subsys id for megaraid sata 300-4x
+
+iv.	Remove yield() while mailbox handshake in synchronous commands
+
+
+	"My other main gripe is things like this:
+
+	+	// wait for maximum 1 second for status to post
+	+	for (i = 0; i < 40000; i++) {
+	+		if (mbox->numstatus != 0xFF) break;
+	+		udelay(25); yield();
+	+	}
+
+	which litter the driver.  Use of yield() in drivers is deprecated."
+
+		- James Bottomley <James.Bottomley@SteelEye.com>, 07.14.2004
+		 linux-scsi mailing list
+
+v.	Remove redundant __megaraid_busywait_mbox routine
+
+vi.	Fix bug in the managment module, which causes a system lockup when the
+	IO module is loaded and then unloaded, followed by executing any
+	management utility. The current version of management module does not
+	handle the adapter unregister properly.
+
+	Specifically, it still keeps a reference to the unregistered
+	controllers. To avoid this, the static array adapters has been
+	replaced by a dynamic list, which gets updated every time an adapter
+	is added or removed.
+
+	Also, during unregistration of the IO module, the resources are
+	now released in the exact reverse order of the allocation time
+	sequence.
+
+
+Release Date	: Fri Jun 25 18:58:43 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.1.0
+Older Version	: megaraid 2.20.0.1
+
+i.	Stale list pointer in adapter causes kernel panic when module
+	megaraid_mbox is unloaded
+
+
+Release Date	: Thu Jun 24 20:37:11 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.0.1
+Older Version	: megaraid 2.20.0.00
+
+i.	Modules are not 'y' by default, but depend on current definition of
+	SCSI & PCI.
+
+ii.	Redundant structure mraid_driver_t removed.
+
+iii.	Miscellaneous indentation and goto/label fixes.
+		- Christoph Hellwig <hch@infradead.org>, 06.24.2004 linux-scsi
+
+iv.	scsi_host_put(), do just before completing HBA shutdown.
+
+
+
+Release Date	: Mon Jun 21 19:53:54 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.0.0
+Older Version	: megaraid 2.20.0.rc2 and 2.00.3
+
+i.	Independent module to interact with userland applications and
+	multiplex command to low level RAID module(s).
+
+	"Shared code in a third module, a "library module", is an acceptable
+	solution. modprobe automatically loads dependent modules, so users
+	running "modprobe driver1" or "modprobe driver2" would automatically
+	load the shared library module."
+
+		- Jeff Garzik <jgarzik@pobox.com> 02.25.2004 LKML
+
+	"As Jeff hinted, if your userspace<->driver API is consistent between
+	your new MPT-based RAID controllers and your existing megaraid driver,
+	then perhaps you need a single small helper module (lsiioctl or some
+	better name), loaded by both mptraid and megaraid automatically, which
+	handles registering the /dev/megaraid node dynamically. In this case,
+	both mptraid and megaraid would register with lsiioctl for each
+	adapter discovered, and lsiioctl would essentially be a switch,
+	redirecting userspace tool ioctls to the appropriate driver."
+
+		- Matt Domsch <Matt_Domsch@dell.com> 02.25.2004 LKML
+
+ii.	Remove C99 initializations from pci_device id.
+
+	"pci_id_table_g would be much more readable when not using C99
+	initializers.
+	PCI table doesn't change, there's lots of users that prefer the more
+	readable variant.  And it's really far less and much easier to grok
+	lines without C99 initializers."
+
+		- Christoph Hellwig <hch@infradead.org>, 05.28.2004 linux-scsi
+
+iii.	Many fixes as suggested by Christoph Hellwig <hch@infradead.org> on
+	linux-scsi, 05.28.2004
+
+iv.	We now support up to 32 parallel ioctl commands instead of current 1.
+	There is a conscious effort to let memory allocation not fail for ioctl
+	commands.
+
+v.	Do away with internal memory management. Use pci_pool_(create|alloc)
+	instead.
+
+vi.	Kill tasklet when unloading the driver.
+
+vii.	Do not use "host_lock', driver has fine-grain locks now to protect all
+	data structures.
+
+viii.	Optimize the build scatter-gather list routine. The callers already
+	know the data transfer address and length.
+
+ix.	Better implementation of error handling and recovery. Driver now
+	performs extended errors recovery for instances like scsi cable pull.
+
+x.	Disassociate the management commands with an overlaid scsi command.
+	Driver now treats the management packets as special packets and has a
+	dedicated callback routine.

Documentation/scsi/megaraid.txt

+			Notes on Management Module
+			~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Overview:
+--------
+
+Different classes of controllers from LSI Logic, accept and respond to the
+user applications in a similar way. They understand the same firmware control
+commands. Furthermore, the applications also can treat different classes of
+the controllers uniformly. Hence it is logical to have a single module that
+interefaces with the applications on one side and all the low level drivers
+on the other.
+
+The advantages, though obvious, are listed for completeness:
+
+	i.	Avoid duplicate code from the low level drivers.
+	ii.	Unburden the low level drivers from having to export the
+		character node device and related handling.
+	iii.	Implement any policy mechanisms in one place.
+	iv.	Applications have to interface with only module instead of
+		multiple low level drivers.
+
+Currently this module (called Common Management Module) is used only to issue
+ioctl commands. But this module is envisioned to handle all user space level
+interactions. So any 'proc', 'sysfs' implementations will be localized in this
+common module.
+
+Credits:
+-------
+
+"Shared code in a third module, a "library module", is an acceptable
+solution. modprobe automatically loads dependent modules, so users
+running "modprobe driver1" or "modprobe driver2" would automatically
+load the shared library module."
+
+		- Jeff Garzik (jgarzik@pobox.com), 02.25.2004 LKML
+
+"As Jeff hinted, if your userspace<->driver API is consistent between
+your new MPT-based RAID controllers and your existing megaraid driver,
+then perhaps you need a single small helper module (lsiioctl or some
+better name), loaded by both mptraid and megaraid automatically, which
+handles registering the /dev/megaraid node dynamically. In this case,
+both mptraid and megaraid would register with lsiioctl for each
+adapter discovered, and lsiioctl would essentially be a switch,
+redirecting userspace tool ioctls to the appropriate driver."
+
+		- Matt Domsch, (Matt_Domsch@dell.com), 02.25.2004 LKML
+
+Design:
+------
+
+The Common Management Module is implemented in megaraid_mm.[ch] files. This
+module acts as a registry for low level hba drivers. The low level drivers
+(currently only megaraid) register each controller with the common module.
+
+The applications interface with the common module via the character device
+node exported by the module.
+
+The lower level drivers now understand only a new improved ioctl packet called
+uioc_t. The management module converts the older ioctl packets from the older
+applications into uioc_t. After driver handles the uioc_t, the common module
+will convert that back into the old format before returning to applications.
+
+As new applications evolve and replace the old ones, the old packet format 
+will be retired.
+
+Common module dedicates one uioc_t packet to each controller registered. This
+can easily be more than one. But since megaraid is the only low level driver
+today, and it can handle only one ioctl, there is no reason to have more. But
+as new controller classes get added, this will be tuned appropriately.

MAINTAINERS

@@ -627,6 +627,8 @@ DC390/AM53C974 SCSI driver
 P:	Kurt Garloff
 M:	garloff@suse.de
 W:	http://www.garloff.de/kurt/linux/dc390/
+P:	Guennadi Liakhovetski
+M:	g.liakhovetski@gmx.de
 S:	Maintained
 
 DECnet NETWORK LAYER
@@ -956,6 +958,12 @@ L:	sensors@stimpy.netroedge.com
 W:	http://www.lm-sensors.nu/
 S:	Maintained
 
+I2O
+P:	Markus Lidel
+M:	markus.lidel@shadowconnect.com
+W:	http://i2o.shadowconnect.com/
+S:	Maintained
+
 i386 BOOT CODE
 P:	Riley H. Williams
 M:	Riley@Williams.Name

drivers/block/scsi_ioctl.c

@@ -538,6 +538,7 @@ int scsi_cmd_ioctl(struct file *file, struct gendisk *bd_disk, unsigned int cmd,
 		 * old junk scsi send command ioctl
 		 */
 		case SCSI_IOCTL_SEND_COMMAND:
+			printk(KERN_WARNING "program %s is using a deprecated SCSI ioctl, please convert it to SG_IO\n", current->comm);
 			err = -EINVAL;
 			if (!arg)
 				break;

drivers/message/fusion/Kconfig

@@ -27,39 +27,6 @@ config FUSION_MAX_SGE
 	  necessary (or recommended) unless the user will be running 
 	  large I/O's via the raw interface.
 
-config FUSION_ISENSE
-	tristate "Enhanced SCSI error reporting"
-	depends on MODULES && FUSION && m
-	---help---
-	  The isense module (roughly stands for Interpret SENSE data) is
-	  completely optional.  It simply provides extra English readable
-	  strings in SCSI Error Report(s) that might be generated from the
-	  Fusion MPT SCSI Host driver, for example when a target device
-	  returns a SCSI check condition on a I/O.  Without this module
-	  loaded you might see:
-
-	  SCSI Error Report =-=-= (ioc0,scsi5:0)
-	  SCSI_Status=02h (CHECK_CONDITION)
-	  Original_CDB[]: 2A 00 00 00 00 41 00 00 02 00
-	  SenseData[12h]: 70 00 02 00 00 00 00 0A 00 00 00 00 04 02 02 00 00 00
-	  SenseKey=2h (NOT READY); FRU=02h
-	  ASC/ASCQ=29h/00h
-
-	  Where otherwise, if this module had been loaded, you would see:
-
-	  SCSI Error Report =-=-= (ioc0,scsi5:0)
-	  SCSI_Status=02h (CHECK_CONDITION)
-	  Original_CDB[]: 2A 00 00 00 00 41 00 00 02 00 - "WRITE(10)"
-	  SenseData[12h]: 70 00 02 00 00 00 00 0A 00 00 00 00 04 02 02 00 00 00
-	  SenseKey=2h (NOT READY); FRU=02h
-	  ASC/ASCQ=29h/00h "LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED"
-
-	  Say M for "Enhanced SCSI error reporting" to compile this optional module,
-	  creating a driver named: isense.
-
-	  NOTE: Support for building this feature into the kernel is not
-	  available, due to kernel size considerations.
-
 config FUSION_CTL
 	tristate "Fusion MPT misc device (ioctl) driver"
 	depends on MODULES && FUSION && m

drivers/message/fusion/Makefile

@@ -48,6 +48,5 @@ EXTRA_CFLAGS += ${MPT_CFLAGS}
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
 
 obj-$(CONFIG_FUSION)		+= mptbase.o mptscsih.o
-obj-$(CONFIG_FUSION_ISENSE)	+= isense.o
 obj-$(CONFIG_FUSION_CTL)	+= mptctl.o
 obj-$(CONFIG_FUSION_LAN)	+= mptlan.o

drivers/message/fusion/ascq_tbl.sh

-#!/bin/sh
-#
-#  ascq_tbl.sh - Translate SCSI t10.org's "asc-num.txt" file of
-#                SCSI Additional Sense Code & Qualifiers (ASC/ASCQ's)
-#                into something useful in C, creating "ascq_tbl.c" file.
-#
-#*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*#
-
-PREF_INFILE="t10.org/asc-num.txt"	# From SCSI t10.org
-PREF_OUTFILE="ascq_tbl.c"
-
-#*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*#
-
-xlate_ascq() {
-	cat | awk '
-	BEGIN {
-		DQ = "\042";
-		OUTFILE = "'"${PREF_OUTFILE}"'";
-		TRUE = 1;
-		FALSE = 0;
-		#debug = TRUE;
-
-		#  read and discard all lines up to and including the one that begins
-		#  with the "magic token" of "-------  --------------  ---"...
-		headers_gone = FALSE;
-		while (!headers_gone) {
-			if (getline <= 0)
-				exit 1;
-			header_line[++hdrs] = $0;
-			if (debug)
-				printf("header_line[%d] = :%s:\n", ++hdrs, $0);
-			if ($0 ~ /^-------  --------------  ---/) {
-				headers_gone = TRUE;
-			}
-		}
-		outcount = 0;
-	}
-
-	(NF > 1) {
-		++outcount;
-		if (debug)
-			printf( "DBG: %s\n", $0 );
-		ASC[outcount] = substr($0,1,2);
-		ASCQ[outcount] = substr($0,5,2);
-		devtypes = substr($0,10,14);
-		gsub(/ /, ".", devtypes);
-		DESCRIP[outcount] = substr($0,26);
-
-		if (!(devtypes in DevTypesVoodoo)) {
-			DevTypesVoodoo[devtypes] = ++voodoo;
-			DevTypesIdx[voodoo] = devtypes;
-		}
-		DEVTYPES[outcount] = DevTypesVoodoo[devtypes];
-
-		#  Handle 0xNN exception stuff...
-		if (ASCQ[outcount] == "NN" || ASCQ[outcount] == "nn")
-			ASCQ[outcount] = "FF";
-	}
-
-	END {
-		printf("#ifndef SCSI_ASCQ_TBL_C_INCLUDED\n") > OUTFILE;
-		printf("#define SCSI_ASCQ_TBL_C_INCLUDED\n") >> OUTFILE;
-
-		printf("\n/* AuToMaGiCaLlY generated from: %s'"${FIN}"'%s\n", DQ, DQ) >> OUTFILE;
-		printf(" *******************************************************************************\n") >> OUTFILE;
-		for (i=1; i<=hdrs; i++) {
-			printf(" * %s\n", header_line[i]) >> OUTFILE;
-		}
-		printf(" */\n") >> OUTFILE;
-
-		printf("\n") >> OUTFILE;
-		for (i=1; i<=voodoo; i++) {
-			printf("static char SenseDevTypes%03d[] = %s%s%s;\n", i, DQ, DevTypesIdx[i], DQ) >> OUTFILE;
-		}
-
-		printf("\nstatic ASCQ_Table_t ASCQ_Table[] = {\n") >> OUTFILE;
-		for (i=1; i<=outcount; i++) {
-			printf("  {\n") >> OUTFILE; 
-			printf("    0x%s, 0x%s,\n", ASC[i], ASCQ[i]) >> OUTFILE;
-			printf("    SenseDevTypes%03d,\n", DEVTYPES[i]) >> OUTFILE;
-			printf("    %s%s%s\n", DQ, DESCRIP[i], DQ) >> OUTFILE;
-			printf("  },\n") >> OUTFILE;
-		}
-		printf( "};\n\n" ) >> OUTFILE;
-
-		printf( "static int ASCQ_TableSize = %d;\n\n", outcount ) >> OUTFILE;
-		printf( "Total of %d ASC/ASCQ records generated\n", outcount );
-		printf("\n#endif\n") >> OUTFILE;
-		close(OUTFILE);
-	}'
-	return
-}
-
-#*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*#
-
-# main()
-if [ $# -lt 1 ]; then
-	echo "INFO: No input filename supplied - using: $PREF_INFILE" >&2
-	FIN=$PREF_INFILE
-else
-	FIN="$1"
-	if [ "$FIN" != "$PREF_INFILE" ]; then
-		echo "INFO: Ok, I'll try chewing on '$FIN' for SCSI ASC/ASCQ combos..." >&2
-	fi
-	shift
-fi
-
-cat $FIN | xlate_ascq
-exit 0

drivers/message/fusion/isense.c

-/*
- *  linux/drivers/message/fusion/isense.c
- *      Little linux driver / shim that interfaces with the Fusion MPT
- *      Linux base driver to provide english readable strings in SCSI
- *      Error Report logging output.  This module implements SCSI-3
- *      Opcode lookup and a sorted table of SCSI-3 ASC/ASCQ strings.
- *
- *  Copyright (c) 1991-2004 Steven J. Ralston
- *  Written By: Steven J. Ralston
- *  (yes I wrote some of the orig. code back in 1991!)
- *  (mailto:sjralston1@netscape.net)
- *  (mailto:mpt_linux_developer@lsil.com)
- *
- *  $Id: isense.c,v 1.33 2002/02/27 18:44:19 sralston Exp $
- */
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; version 2 of the License.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    NO WARRANTY
-    THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-    CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-    LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-    solely responsible for determining the appropriateness of using and
-    distributing the Program and assumes all risks associated with its
-    exercise of rights under this Agreement, including but not limited to
-    the risks and costs of program errors, damage to or loss of data,
-    programs or equipment, and unavailability or interruption of operations.
-
-    DISCLAIMER OF LIABILITY
-    NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-    DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-    USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-    HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-#include <linux/version.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#define MODULEAUTHOR "Steven J. Ralston"
-#define COPYRIGHT "Copyright (c) 2001-2004 " MODULEAUTHOR
-#include "mptbase.h"
-
-#include "isense.h"
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *  Private data...
- */
-
-/*
- *  YIKES!  I don't usually #include C source files, but..
- *  The following #include's pulls in our needed ASCQ_Table[] array,
- *  ASCQ_TableSz integer, and ScsiOpcodeString[] array!
- */
-#include "ascq_tbl.c"
-#include "scsiops.c"
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#define my_NAME		"SCSI-3 Opcodes & ASC/ASCQ Strings"
-#define my_VERSION	MPT_LINUX_VERSION_COMMON
-#define MYNAM		"isense"
-
-MODULE_AUTHOR(MODULEAUTHOR);
-MODULE_DESCRIPTION(my_NAME);
-MODULE_LICENSE("GPL");
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-int __init isense_init(void)
-{
-	show_mptmod_ver(my_NAME, my_VERSION);
-
-	/*
-	 *  Install our handler
-	 */
-	if (mpt_register_ascqops_strings(&ASCQ_Table[0], ASCQ_TableSize, ScsiOpcodeString) != 1)
-	{
-		printk(KERN_ERR MYNAM ": ERROR: Can't register with Fusion MPT base driver!\n");
-		return -EBUSY;
-	}
-	printk(KERN_INFO MYNAM ": Registered SCSI-3 Opcodes & ASC/ASCQ Strings\n");
-	return 0;
-}
-
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static void isense_exit(void)
-{
-#ifdef MODULE
-	mpt_deregister_ascqops_strings();
-#endif
-	printk(KERN_INFO MYNAM ": Deregistered SCSI-3 Opcodes & ASC/ASCQ Strings\n");
-}
-
-module_init(isense_init);
-module_exit(isense_exit);
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-

drivers/message/fusion/isense.h

-#ifndef ISENSE_H_INCLUDED
-#define ISENSE_H_INCLUDED
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-#ifdef __KERNEL__
-#include <linux/types.h>		/* needed for u8, etc. */
-#include <linux/string.h>		/* needed for strcat   */
-#include <linux/kernel.h>		/* needed for sprintf  */
-#else
-    #ifndef U_STUFF_DEFINED
-    #define U_STUFF_DEFINED
-    typedef unsigned char u8;
-    typedef unsigned short u16;
-    typedef unsigned int u32;
-    #endif
-#endif
-
-#include "scsi3.h"			/* needed for all things SCSI */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *  Defines and typedefs...
- */
-
-#ifdef __KERNEL__
-#define PrintF(x) printk x
-#else
-#define PrintF(x) printf x
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#define FALSE 0
-#endif
-
-#define RETRY_STATUS  ((int) 1)
-#define PUT_STATUS    ((int) 0)
-
-/*
- *    A generic structure to hold info about IO request that caused
- *    a Request Sense to be performed, and the resulting Sense Data.
- */
-typedef struct IO_Info
-{
-    char *DevIDStr;   /* String of chars which identifies the device.       */
-    u8   *cdbPtr;     /* Pointer (Virtual/Logical addr) to CDB bytes of
-                           IO request that caused ContAllegianceCond.       */
-    u8   *sensePtr;   /* Pointer (Virtual/Logical addr) to Sense Data
-                           returned by Request Sense operation.             */
-    u8   *dataPtr;    /* Pointer (Virtual/Logical addr) to Data buffer
-                           of IO request caused ContAllegianceCondition.    */
-    u8   *inqPtr;     /* Pointer (Virtual/Logical addr) to Inquiry Data for
-                           IO *Device* that caused ContAllegianceCondition. */
-    u8    SCSIStatus; /* SCSI status byte of IO request that caused
-                           Contingent Allegiance Condition.                 */
-    u8    DoDisplay;  /* Shall we display any messages?                     */
-    u16   rsvd_align1;
-    u32   ComplCode;  /* Four-byte OS-dependent completion code.            */
-    u32   NotifyL;    /* Four-byte OS-dependent notification field.         */
-} IO_Info_t;
-
-/*
- *  SCSI Additional Sense Code and Additional Sense Code Qualifier table.
- */
-typedef struct ASCQ_Table
-{
-    u8     ASC;
-    u8     ASCQ;
-    char  *DevTypes;
-    char  *Description;
-} ASCQ_Table_t;
-
-#if 0
-/*
- *  SCSI Opcodes table.
- */
-typedef struct SCSI_OPS_Table
-{
-    u8     OpCode;
-    char  *DevTypes;
-    char  *ScsiCmndStr;
-} SCSI_OPS_Table_t;
-#endif
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *  Public entry point prototypes
- */
-
-/* in scsiherr.c, needed by mptscsih.c */
-extern int	 mpt_ScsiHost_ErrorReport(IO_Info_t *ioop);
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#endif
-

drivers/message/fusion/mptctl.c

@@ -111,7 +111,6 @@ MODULE_LICENSE("GPL");
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
 static int mptctl_id = -1;
-static struct semaphore mptctl_syscall_sem_ioc[MPT_MAX_ADAPTERS];
 
 static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait );
 
@@ -140,6 +139,9 @@ static int mptctl_do_reset(unsigned long arg);
 static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd);
 static int mptctl_hp_targetinfo(unsigned long arg);
 
+static int  mptctl_probe(struct pci_dev *, const struct pci_device_id *);
+static void mptctl_remove(struct pci_dev *);
+
 /*
  * Private function calls.
  */
@@ -208,10 +210,10 @@ mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock)
 	}
 
 	if (nonblock) {
-		if (down_trylock(&mptctl_syscall_sem_ioc[ioc->id]))
+		if (down_trylock(&ioc->ioctl->sem_ioc))
 			rc = -EAGAIN;
 	} else {
-		if (down_interruptible(&mptctl_syscall_sem_ioc[ioc->id]))
+		if (down_interruptible(&ioc->ioctl->sem_ioc))
 			rc = -ERESTARTSYS;
 	}
 	dctlprintk((KERN_INFO MYNAM "::mptctl_syscall_down return %d\n", rc));
@@ -445,7 +447,7 @@ static int mptctl_bus_reset(MPT_IOCTL *ioctl)
 
 		mptctl_free_tm_flags(ioctl->ioc);
 		del_timer(&ioctl->TMtimer);
-		mpt_free_msg_frame(mptctl_id, ioctl->ioc, mf);
+		mpt_free_msg_frame(ioctl->ioc, mf);
 		ioctl->tmPtr = NULL;
 	}
 
@@ -482,7 +484,7 @@ mptctl_free_tm_flags(MPT_ADAPTER *ioc)
 
 	spin_lock_irqsave(&ioc->FreeQlock, flags);
 
-	hd->tmState = TM_STATE_ERROR;
+	hd->tmState = TM_STATE_NONE;
 	hd->tmPending = 0;
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 
@@ -520,7 +522,7 @@ mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 		if (ioctl && (ioctl->status & MPT_IOCTL_STATUS_TMTIMER_ACTIVE)){
 			ioctl->status &= ~MPT_IOCTL_STATUS_TMTIMER_ACTIVE;
 			del_timer(&ioctl->TMtimer);
-			mpt_free_msg_frame(mptctl_id, ioc, ioctl->tmPtr);
+			mpt_free_msg_frame(ioc, ioctl->tmPtr);
 		}
 
 	} else {
@@ -630,8 +632,7 @@ mptctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
 	else
 		ret = -EINVAL;
 
-
-	up(&mptctl_syscall_sem_ioc[iocp->id]);
+	up(&iocp->ioctl->sem_ioc);
 
 	return ret;
 }
@@ -1807,7 +1808,6 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	struct buflist	bufOut; /* data Out buffer */
 	dma_addr_t	dma_addr_in;
 	dma_addr_t	dma_addr_out;
-	int		dir;	/* PCI data direction */
 	int		sgSize = 0;	/* Num SG elements */
 	int		iocnum, flagsLength;
 	int		sz, rc = 0;
@@ -2117,9 +2117,9 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 
 		/* Set up the dataOut memory allocation */
 		if (karg.dataOutSize > 0) {
-			dir = PCI_DMA_TODEVICE;
 			if (karg.dataInSize > 0) {
 				flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+						MPI_SGE_FLAGS_END_OF_BUFFER |
 						MPI_SGE_FLAGS_DIRECTION |
 						mpt_addr_size() )
 						<< MPI_SGE_FLAGS_SHIFT;
@@ -2158,7 +2158,6 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 		}
 
 		if (karg.dataInSize > 0) {
-			dir = PCI_DMA_FROMDEVICE;
 			flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
 			flagsLength |= karg.dataInSize;
 
@@ -2196,6 +2195,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	add_timer(&ioc->ioctl->timer);
 
 	if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
+		DBG_DUMP_TM_REQUEST_FRAME((u32 *)mf);
 		rc = mpt_send_handshake_request(mptctl_id, ioc,
 				sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP);
 		if (rc == 0) {
@@ -2206,7 +2206,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 			del_timer(&ioc->ioctl->timer);
 			ioc->ioctl->status &= ~MPT_IOCTL_STATUS_TIMER_ACTIVE;
 			ioc->ioctl->status |= MPT_IOCTL_STATUS_TM_FAILED;
-			mpt_free_msg_frame(mptctl_id, ioc, mf);
+			mpt_free_msg_frame(ioc, mf);
 		}
 	} else {
 		mpt_put_msg_frame(mptctl_id, ioc, mf);
@@ -2324,7 +2324,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
 	 * otherwise, failure occured after mf acquired.
 	 */
 	if (mf)
-		mpt_free_msg_frame(mptctl_id, ioc, mf);
+		mpt_free_msg_frame(ioc, mf);
 
 	return rc;
 }
@@ -2738,7 +2738,7 @@ compat_mptfwxfer_ioctl(unsigned int fd, unsigned int cmd,
 
 	ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen);
 
-	up(&mptctl_syscall_sem_ioc[iocp->id]);
+	up(&iocp->ioctl->sem_ioc);
 
 	return ret;
 }
@@ -2792,36 +2792,32 @@ compat_mpt_command(unsigned int fd, unsigned int cmd,
 	 */
 	ret = mptctl_do_mpt_command (karg, &uarg->MF);
 
-	up(&mptctl_syscall_sem_ioc[iocp->id]);
+	up(&iocp->ioctl->sem_ioc);
 
 	return ret;
 }
 
 #endif
 
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-int __init mptctl_init(void)
+/*
+ *	mptctl_probe - Installs ioctl devices per bus.
+ *	@pdev: Pointer to pci_dev structure
+ *
+ *	Returns 0 for success, non-zero for failure.
+ *
+ */
+
+static int
+mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	int err;
-	int i;
-	int where = 1;
 	int sz;
 	u8 *mem;
-	MPT_ADAPTER *ioc = NULL;
-	int iocnum;
+	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 
-	show_mptmod_ver(my_NAME, my_VERSION);
-
-	for (i=0; i<MPT_MAX_ADAPTERS; i++) {
-		sema_init(&mptctl_syscall_sem_ioc[i], 1);
-
-		ioc = NULL;
-		if (((iocnum = mpt_verify_adapter(i, &ioc)) < 0) ||
-		    (ioc == NULL)) {
-			continue;
-		}
-		else {
-			/* This adapter instance is found.
+	/*
 	 * Allocate and inite a MPT_IOCTL structure
 	*/
 	sz = sizeof (MPT_IOCTL);
@@ -2840,7 +2836,47 @@ int __init mptctl_init(void)
 	init_timer (&ioc->ioctl->TMtimer);
 	ioc->ioctl->TMtimer.data = (unsigned long) ioc->ioctl;
 	ioc->ioctl->TMtimer.function = mptctl_timer_expired;
-		}
+	sema_init(&ioc->ioctl->sem_ioc, 1);
+	return 0;
+
+out_fail:
+
+	mptctl_remove(pdev);
+	return err;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ *	mptctl_remove - Removed ioctl devices
+ *	@pdev: Pointer to pci_dev structure
+ *
+ *
+ */
+static void
+mptctl_remove(struct pci_dev *pdev)
+{
+	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+
+	kfree ( ioc->ioctl );
+}
+
+static struct mpt_pci_driver mptctl_driver = {
+  .probe		= mptctl_probe,
+  .remove		= mptctl_remove,
+};
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+static int __init mptctl_init(void)
+{
+	int err;
+	int where = 1;
+
+	show_mptmod_ver(my_NAME, my_VERSION);
+
+	if(mpt_device_driver_register(&mptctl_driver,
+	  MPTCTL_DRIVER) != 0 ) {
+		dprintk((KERN_INFO MYNAM
+		": failed to register dd callbacks\n"));
 	}
 
 #ifdef CONFIG_COMPAT
@@ -2922,29 +2958,14 @@ int __init mptctl_init(void)
 	unregister_ioctl32_conversion(HP_GETTARGETINFO);
 #endif
 
-	for (i=0; i<MPT_MAX_ADAPTERS; i++) {
-		ioc = NULL;
-		if (((iocnum = mpt_verify_adapter(i, &ioc)) < 0) ||
-		    (ioc == NULL)) {
-			continue;
-		}
-		else {
-			if (ioc->ioctl) {
-				kfree ( ioc->ioctl );
-				ioc->ioctl = NULL;
-			}
-		}
-	}
+	mpt_device_driver_deregister(MPTCTL_DRIVER);
+
 	return err;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-void mptctl_exit(void)
+static void mptctl_exit(void)
 {
-	int i;
-	MPT_ADAPTER *ioc;
-	int iocnum;
-
 	misc_deregister(&mptctl_miscdev);
 	printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n",
 			 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor);
@@ -2957,6 +2978,8 @@ void mptctl_exit(void)
 	mpt_deregister(mptctl_id);
 	printk(KERN_INFO MYNAM ": Deregistered from Fusion MPT base driver\n");
 
+        mpt_device_driver_deregister(MPTCTL_DRIVER);
+
 #ifdef CONFIG_COMPAT
 	unregister_ioctl32_conversion(MPTIOCINFO);
 	unregister_ioctl32_conversion(MPTIOCINFO1);
@@ -2973,20 +2996,6 @@ void mptctl_exit(void)
 	unregister_ioctl32_conversion(HP_GETTARGETINFO);
 #endif
 
-	/* Free allocated memory */
-	for (i=0; i<MPT_MAX_ADAPTERS; i++) {
-		ioc = NULL;
-		if (((iocnum = mpt_verify_adapter(i, &ioc)) < 0) ||
-		    (ioc == NULL)) {
-			continue;
-		}
-		else {
-			if (ioc->ioctl) {
-				kfree ( ioc->ioctl );
-				ioc->ioctl = NULL;
-			}
-		}
-	}
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

drivers/message/fusion/mptlan.c

@@ -177,11 +177,9 @@ static int LanCtx = -1;
 static u32 max_buckets_out = 127;
 static u32 tx_max_out_p = 127 - 16;
 
-static struct net_device *mpt_landev[MPT_MAX_ADAPTERS+1];
-
 #ifdef QLOGIC_NAA_WORKAROUND
 static struct NAA_Hosed *mpt_bad_naa = NULL;
-rwlock_t bad_naa_lock;
+rwlock_t bad_naa_lock = RW_LOCK_UNLOCKED;
 #endif
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -203,7 +201,7 @@ extern int mpt_lan_index;
 static int
 lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
 {
-	struct net_device *dev = mpt_landev[ioc->id];
+	struct net_device *dev = ioc->netdev;
 	int FreeReqFrame = 0;
 
 	dioprintk((KERN_INFO MYNAM ": %s/%s: Got reply.\n",
@@ -336,7 +334,7 @@ lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
 static int
 mpt_lan_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
-	struct net_device *dev = mpt_landev[ioc->id];
+	struct net_device *dev = ioc->netdev;
 	struct mpt_lan_priv *priv = netdev_priv(dev);
 
 	dlprintk((KERN_INFO MYNAM ": IOC %s_reset routed to LAN driver!\n",
@@ -1334,7 +1332,7 @@ mpt_lan_post_receive_buckets(void *dev_id)
 		if (pSimple == NULL) {
 /**/			printk (KERN_WARNING MYNAM "/%s: No buckets posted\n",
 /**/				__FUNCTION__);
-			mpt_free_msg_frame(LanCtx, mpt_dev, mf);
+			mpt_free_msg_frame(mpt_dev, mf);
 			goto out;
 		}
 
@@ -1451,20 +1449,74 @@ mpt_register_lan_device (MPT_ADAPTER *mpt_dev, int pnum)
 	return dev;
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static int __init mpt_lan_init (void)
+static int
+mptlan_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
 	struct net_device	*dev;
-	MPT_ADAPTER *p;
-	int i, j;
+	int			i;
 
-	show_mptmod_ver(LANAME, LANVER);
+	for (i = 0; i < ioc->facts.NumberOfPorts; i++) {
+		printk(KERN_INFO MYNAM ": %s: PortNum=%x, "
+		       "ProtocolFlags=%02Xh (%c%c%c%c)\n",
+		       ioc->name, ioc->pfacts[i].PortNumber,
+		       ioc->pfacts[i].ProtocolFlags,
+		       MPT_PROTOCOL_FLAGS_c_c_c_c(
+			       ioc->pfacts[i].ProtocolFlags));
+
+		if (!(ioc->pfacts[i].ProtocolFlags &
+					MPI_PORTFACTS_PROTOCOL_LAN)) {
+			printk(KERN_INFO MYNAM ": %s: Hmmm... LAN protocol "
+			       "seems to be disabled on this adapter port!\n",
+			       ioc->name);
+			continue;
+		}
 
-#ifdef QLOGIC_NAA_WORKAROUND
-	/* Init the global r/w lock for the bad_naa list. We want to do this
-	   before any boards are initialized and may be used. */
-	rwlock_init(&bad_naa_lock);
-#endif
+		dev = mpt_register_lan_device(ioc, i);
+		if (!dev) {
+			printk(KERN_ERR MYNAM ": %s: Unable to register "
+			       "port%d as a LAN device\n", ioc->name,
+			       ioc->pfacts[i].PortNumber);
+			continue;
+		}
+		
+		printk(KERN_INFO MYNAM ": %s: Fusion MPT LAN device "
+		       "registered as '%s'\n", ioc->name, dev->name);
+		printk(KERN_INFO MYNAM ": %s/%s: "
+		       "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
+		       IOC_AND_NETDEV_NAMES_s_s(dev),
+		       dev->dev_addr[0], dev->dev_addr[1],
+		       dev->dev_addr[2], dev->dev_addr[3],
+		       dev->dev_addr[4], dev->dev_addr[5]);
+	
+		ioc->netdev = dev;
+
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static void
+mptlan_remove(struct pci_dev *pdev)
+{
+	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
+	struct net_device	*dev = ioc->netdev;
+
+	if(dev != NULL) {
+		unregister_netdev(dev);
+		free_netdev(dev);
+	}
+}
+
+static struct mpt_pci_driver mptlan_driver = {
+	.probe		= mptlan_probe,
+	.remove		= mptlan_remove,
+};
+
+static int __init mpt_lan_init (void)
+{
+	show_mptmod_ver(LANAME, LANVER);
 
 	if ((LanCtx = mpt_register(lan_reply, MPTLAN_DRIVER)) <= 0) {
 		printk (KERN_ERR MYNAM ": Failed to register with MPT base driver\n");
@@ -1476,88 +1528,32 @@ static int __init mpt_lan_init (void)
 
 	dlprintk((KERN_INFO MYNAM ": assigned context of %d\n", LanCtx));
 
-	if (mpt_reset_register(LanCtx, mpt_lan_ioc_reset) == 0) {
-		dlprintk((KERN_INFO MYNAM ": Registered for IOC reset notifications\n"));
-	} else {
+	if (mpt_reset_register(LanCtx, mpt_lan_ioc_reset)) {
 		printk(KERN_ERR MYNAM ": Eieee! unable to register a reset "
 		       "handler with mptbase! The world is at an end! "
 		       "Everything is fading to black! Goodbye.\n");
 		return -EBUSY;
 	}
 
-	for (j = 0; j < MPT_MAX_ADAPTERS; j++) {
-		mpt_landev[j] = NULL;
-	}
-
-	list_for_each_entry(p, &ioc_list, list) {
-		for (i = 0; i < p->facts.NumberOfPorts; i++) {
-			printk (KERN_INFO MYNAM ": %s: PortNum=%x, ProtocolFlags=%02Xh (%c%c%c%c)\n",
-					p->name,
-					p->pfacts[i].PortNumber,
-					p->pfacts[i].ProtocolFlags,
-					MPT_PROTOCOL_FLAGS_c_c_c_c(p->pfacts[i].ProtocolFlags));
-
-			if (!(p->pfacts[i].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
-				printk (KERN_INFO MYNAM ": %s: Hmmm... LAN protocol seems to be disabled on this adapter port!\n",
-						p->name);
-				continue;
-			}
-
-			dev = mpt_register_lan_device (p, i);
-			if (!dev) {
-				printk (KERN_ERR MYNAM ": %s: Unable to register port%d as a LAN device\n",
-						p->name,
-						p->pfacts[i].PortNumber);
-			}
-			printk (KERN_INFO MYNAM ": %s: Fusion MPT LAN device registered as '%s'\n",
-					p->name, dev->name);
-			printk (KERN_INFO MYNAM ": %s/%s: LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
-					IOC_AND_NETDEV_NAMES_s_s(dev),
-					dev->dev_addr[0], dev->dev_addr[1],
-					dev->dev_addr[2], dev->dev_addr[3],
-					dev->dev_addr[4], dev->dev_addr[5]);
-//					printk (KERN_INFO MYNAM ": %s/%s: Max_TX_outstanding = %d\n",
-//							IOC_AND_NETDEV_NAMES_s_s(dev),
-//							NETDEV_TO_LANPRIV_PTR(dev)->tx_max_out);
-			j = p->id;
-			mpt_landev[j] = dev;
-			dlprintk((KERN_INFO MYNAM "/init: dev_addr=%p, mpt_landev[%d]=%p\n",
-					dev, j,  mpt_landev[j]));
-
-		}
-	}
+	dlprintk((KERN_INFO MYNAM ": Registered for IOC reset notifications\n"));
 	
+	if (mpt_device_driver_register(&mptlan_driver, MPTLAN_DRIVER))
+		dprintk((KERN_INFO MYNAM ": failed to register dd callbacks\n"));
 	return 0;
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 static void __exit mpt_lan_exit(void)
 {
-	int i;
-
+	mpt_device_driver_deregister(MPTLAN_DRIVER);
 	mpt_reset_deregister(LanCtx);
 
-	for (i = 0; mpt_landev[i] != NULL; i++) {
-		struct net_device *dev = mpt_landev[i];
-
-		printk (KERN_INFO ": %s/%s: Fusion MPT LAN device unregistered\n",
-			       IOC_AND_NETDEV_NAMES_s_s(dev));
-		unregister_netdev(dev);
-		free_netdev(dev);
-		mpt_landev[i] = NULL;
-	}
-
 	if (LanCtx >= 0) {
 		mpt_deregister(LanCtx);
 		LanCtx = -1;
 		mpt_lan_index = 0;
 	}
-
-	/* deregister any send/receive handler structs. I2Oism? */
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
 module_init(mpt_lan_init);
 module_exit(mpt_lan_exit);
 

drivers/message/i2o/Makefile

@@ -5,6 +5,7 @@
 # In the future, some of these should be built conditionally.
 #
 
+i2o_core-y		+= iop.o driver.o device.o debug.o pci.o exec-osm.o
 obj-$(CONFIG_I2O)	+= i2o_core.o
 obj-$(CONFIG_I2O_CONFIG)+= i2o_config.o
 obj-$(CONFIG_I2O_BLOCK)	+= i2o_block.o

drivers/message/i2o/i2o_block.h

+/*
+ *	Block OSM structures/API
+ *
+ * 	Copyright (C) 1999-2002	Red Hat Software
+ *
+ *	Written by Alan Cox, Building Number Three Ltd
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the
+ *	Free Software Foundation; either version 2 of the License, or (at your
+ *	option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful, but
+ *	WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *	General Public License for more details.
+ *
+ *	For the purpose of avoiding doubt the preferred form of the work
+ *	for making modifications shall be a standards compliant form such
+ *	gzipped tar and not one requiring a proprietary or patent encumbered
+ *	tool to unpack.
+ *
+ *	Fixes/additions:
+ *		Steve Ralston:
+ *			Multiple device handling error fixes,
+ *			Added a queue depth.
+ *		Alan Cox:
+ *			FC920 has an rmw bug. Dont or in the end marker.
+ *			Removed queue walk, fixed for 64bitness.
+ *			Rewrote much of the code over time
+ *			Added indirect block lists
+ *			Handle 64K limits on many controllers
+ *			Don't use indirects on the Promise (breaks)
+ *			Heavily chop down the queue depths
+ *		Deepak Saxena:
+ *			Independent queues per IOP
+ *			Support for dynamic device creation/deletion
+ *			Code cleanup
+ *	    		Support for larger I/Os through merge* functions
+ *			(taken from DAC960 driver)
+ *		Boji T Kannanthanam:
+ *			Set the I2O Block devices to be detected in increasing
+ *			order of TIDs during boot.
+ *			Search and set the I2O block device that we boot off
+ *			from as the first device to be claimed (as /dev/i2o/hda)
+ *			Properly attach/detach I2O gendisk structure from the
+ *			system gendisk list. The I2O block devices now appear in
+ *			/proc/partitions.
+ *		Markus Lidel <Markus.Lidel@shadowconnect.com>:
+ *			Minor bugfixes for 2.6.
+ */
+
+#ifndef I2O_BLOCK_OSM_H
+#define I2O_BLOCK_OSM_H
+
+#define I2O_BLOCK_RETRY_TIME HZ/4
+#define I2O_BLOCK_MAX_OPEN_REQUESTS 50
+
+/* I2O Block OSM mempool struct */
+struct i2o_block_mempool {
+	kmem_cache_t	*slab;
+	mempool_t	*pool;
+};
+
+/* I2O Block device descriptor */
+struct i2o_block_device {
+	struct i2o_device *i2o_dev;	/* pointer to I2O device */
+	struct gendisk *gd;
+	spinlock_t lock;		/* queue lock */
+	struct list_head open_queue;	/* list of transfered, but unfinished
+					   requests */
+	unsigned int open_queue_depth;	/* number of requests in the queue */
+
+	int rcache;			/* read cache flags */
+	int wcache;			/* write cache flags */
+	int flags;
+	int power;			/* power state */
+	int media_change_flag;		/* media changed flag */
+};
+
+/* I2O Block device request */
+struct i2o_block_request
+{
+	struct list_head queue;
+	struct request *req;		/* corresponding request */
+	struct i2o_block_device *i2o_blk_dev;	/* I2O block device */
+	int sg_dma_direction;		/* direction of DMA buffer read/write */
+	int sg_nents;			/* number of SG elements */
+	struct scatterlist sg_table[I2O_MAX_SEGMENTS]; /* SG table */
+};
+
+/* I2O Block device delayed request */
+struct i2o_block_delayed_request
+{
+	struct work_struct work;
+	struct request_queue *queue;
+};
+
+#endif

drivers/pci/pci.ids

@@ -225,10 +225,22 @@
 		1000 0530  MegaRAID 530 SCSI 320-0X RAID Controller
 		1000 0531  MegaRAID 531 SCSI 320-4X RAID Controller
 		1000 0532  MegaRAID 532 SCSI 320-2X RAID Controller
-		1028 0533  PowerEdge Expandable RAID Controller 4/QC
-		8086 0532  Storage RAID Controller SRCU42X
+		1028 0531  PowerEdge Expandable RAID Controller 4/QC
+		8086 0530  MegaRAID Intel RAID Controller SRCZCRX
+		8086 0532  MegaRAID Intel RAID Controller SRCU42X
 	0408  MegaRAID
-		1028 0002  PowerEdge Expandable RAID Controller 4e/DC
+		1000 0001  MegaRAID SCSI 320-1E RAID Controller
+		1000 0002  MegaRAID SCSI 320-2E RAID Controller
+		1028 0001  Dell PowerEdge RAID Controller PERC4e/SC
+		1028 0002  Dell PowerEdge RAID Controller PERC4e/DC
+		1734 1065  FSC MegaRAID PCI Express ROMB
+		8086 0002  MegaRAID Intel RAID Controller SRCU42E
+	0409  MegaRAID
+		1000 3004  MegaRAID SATA 300-4X RAID Controller
+		1000 3008  MegaRAID SATA 300-8X RAID Controller
+		8086 3008  MegaRAID Intel RAID Controller SRCS28X
+		8086 3431  MegaRAID Intel RAID Controller Alief SROMBU42E
+		8086 3499  MegaRAID Intel RAID Controller Harwich SROMBU42E
 	0621  FC909 Fibre Channel Adapter
 	0622  FC929 Fibre Channel Adapter
 		1000 1020  44929 O Dual Fibre Channel card
@@ -252,7 +264,7 @@
 	1960  MegaRAID
 		1000 0518  MegaRAID 518 SCSI 320-2 Controller
 		1000 0520  MegaRAID 520 SCSI 320-1 Controller
-		1000 0522  MegaRAID 522 i4133 RAID Controller
+		1000 0522  MegaRAID 522 i4 133 RAID Controller
 		1000 0523  MegaRAID SATA 150-6 RAID Controller
 		1000 4523  MegaRAID SATA 150-4 RAID Controller
 		1000 a520  MegaRAID ZCR SCSI 320-0 Controller
@@ -260,6 +272,8 @@
 		1028 0520  MegaRAID 520 DELL PERC 4/SC RAID Controller
 		1028 0531  PowerEdge Expandable RAID Controller 4/QC
 		1028 0533  PowerEdge Expandable RAID Controller 4/QC
+		8086 0520  MegaRAID Intel RAID Controller SRCU41L
+		8086 0523  MegaRAID Intel RAID Controller SRCS16
 1001  Kolter Electronic
 	0010  PCI 1616 Measurement card with 32 digital I/O lines
 	0011  OPTO-PCI Opto-Isolated digital I/O board
@@ -959,6 +973,7 @@
 	0180  Snipe chipset SCSI controller
 		1014 0241  iSeries 2757 DASD IOA
 		1014 0264  Quad Channel PCI-X U320 SCSI RAID Adapter (2780)
+		1014 02BD  Quad Channel PCI-X U320 DDR SCSI RAID Adapter (570F)
 	01a7  PCI-X to PCI-X Bridge
 	01bd  ServeRAID Controller
 		1014 01be  ServeRAID-4M
@@ -981,6 +996,8 @@
 	0266  PCI-X Dual Channel SCSI
 	0268  Gigabit Ethernet-SX Adapter (PCI-X)
 	0269  10/100/1000 Base-TX Ethernet Adapter (PCI-X)
+	028C  Citrine chipset SCSI controller
+		1014 02BE  Dual Channel PCI-X U320 DDR SCSI RAID Adapter (571B)
 	0302  X-Architecture Bridge [Summit]
 	ffff  MPIC-2 interrupt controller
 1015  LSI Logic Corp of Canada
@@ -1244,6 +1261,8 @@
 		1028 016c  PowerEdge Expandable RAID Controller 4e/Si
 		1028 016d  PowerEdge Expandable RAID Controller 4e/Di
 		1028 016e  PowerEdge Expandable RAID Controller 4e/Di
+		1028 016f  PowerEdge Expandable RAID Controller 4e/Di
+		1028 0170  PowerEdge Expandable RAID Controller 4e/Di
 	0014  Remote Access Card 4 Daughter Card SMIC interface
 1029  Siemens Nixdorf IS
 102a  LSI Logic
@@ -2118,6 +2137,8 @@
 		1014 0242  iSeries 2872 DASD IOA
 		1014 0266  Dual Channel PCI-X U320 SCSI Adapter
 		1014 0278  Dual Channel PCI-X U320 SCSI RAID Adapter
+		1014 02D3  Dual Channel PCI-X U320 SCSI Adapter
+		1014 02D4  Dual Channel PCI-X U320 SCSI RAID Adapter
 	ba55  eXtremeRAID 1100 support Device
 	ba56  eXtremeRAID 2000/3000 support Device
 106a  Aten Research Inc

drivers/scsi/Kconfig

@@ -320,7 +320,7 @@ source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
 
 config SCSI_AIC7XXX_OLD
 	tristate "Adaptec AIC7xxx support (old driver)"
-	depends on SCSI
+	depends on (ISA || EISA || PCI ) && SCSI
 	help
 	  WARNING This driver is an older aic7xxx driver and is no longer
 	  under active development.  Adaptec, Inc. is writing a new driver to
@@ -395,15 +395,7 @@ config SCSI_IN2000
 	  To compile this driver as a module, choose M here: the
 	  module will be called in2000.
 
-config SCSI_MEGARAID
-	tristate "AMI MegaRAID support"
-	depends on PCI && SCSI
-	help
-	  This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
-	  and 467 SCSI host adapters.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called megaraid.
+source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_SATA
 	bool "Serial ATA (SATA) support"
@@ -595,7 +587,7 @@ config SCSI_EATA_MAX_TAGS
 
 config SCSI_EATA_PIO
 	tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
-	depends on SCSI
+	depends on (ISA || EISA || PCI) && SCSI
 	---help---
 	  This driver supports all EATA-PIO protocol compliant SCSI Host
 	  Adapters like the DPT PM2001 and the PM2012A.  EATA-DMA compliant
@@ -780,6 +772,15 @@ config SCSI_IPS
 	  To compile this driver as a module, choose M here: the
 	  module will be called ips.
 
+config SCSI_IBMVSCSI
+	tristate "IBM Virtual SCSI support"
+	depends on PPC_PSERIES || PPC_ISERIES
+	help
+	  This is the IBM POWER Virtual SCSI Client
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ibmvscsic.
+
 config SCSI_INITIO
 	tristate "Initio 9100U(W) support"
 	depends on PCI && SCSI && BROKEN
@@ -1462,7 +1463,7 @@ config SCSI_DEBUG
 
 config SCSI_MESH
 	tristate "MESH (Power Mac internal SCSI) support"
-	depends on PPC_PMAC && SCSI
+	depends on PPC32 && PPC_PMAC && SCSI
 	help
 	  Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
 	  SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
@@ -1507,7 +1508,7 @@ source "drivers/scsi/arm/Kconfig"
 
 config JAZZ_ESP
 	bool "MIPS JAZZ FAS216 SCSI support"
-	depends on MIPS_JAZZ && SCSI
+	depends on MACH_JAZZ && SCSI
 	help
 	  This is the driver for the onboard SCSI host adapter of MIPS Magnum
 	  4000, Acer PICA, Olivetti M700-10 and a few other identical OEM

drivers/scsi/Makefile

@@ -95,7 +95,8 @@ obj-$(CONFIG_SCSI_IBMMCA)	+= ibmmca.o
 obj-$(CONFIG_SCSI_EATA)		+= eata.o
 obj-$(CONFIG_SCSI_DC395x)	+= dc395x.o
 obj-$(CONFIG_SCSI_DC390T)	+= tmscsim.o
-obj-$(CONFIG_SCSI_MEGARAID)	+= megaraid.o
+obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
+obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o
 obj-$(CONFIG_SCSI_SUNESP)	+= esp.o
 obj-$(CONFIG_SCSI_GDTH)		+= gdth.o
@@ -119,6 +120,7 @@ obj-$(CONFIG_SCSI_CPQFCTS)	+= cpqfc.o
 obj-$(CONFIG_SCSI_LASI700)	+= 53c700.o lasi700.o
 obj-$(CONFIG_SCSI_NSP32)	+= nsp32.o
 obj-$(CONFIG_SCSI_IPR)		+= ipr.o
+obj-$(CONFIG_SCSI_IBMVSCSI)	+= ibmvscsi/
 obj-$(CONFIG_SCSI_SATA_SVW)	+= libata.o sata_svw.o
 obj-$(CONFIG_SCSI_ATA_PIIX)	+= libata.o ata_piix.o
 obj-$(CONFIG_SCSI_SATA_PROMISE)	+= libata.o sata_promise.o

drivers/scsi/NCR5380.h

@@ -251,7 +251,6 @@
 struct NCR5380_hostdata {
 	NCR5380_implementation_fields;		/* implementation specific */
 	struct Scsi_Host *host;			/* Host backpointer */
-	struct NCR5380_hostdata *next;		/* Next in our hot chain */
 	unsigned char id_mask, id_higher_mask;	/* 1 << id, all bits greater */
 	unsigned char targets_present;		/* targets we have connected
 						   to, so we can call a select
@@ -270,7 +269,6 @@ struct NCR5380_hostdata {
 	volatile unsigned aborted:1;		/* flag, says aborted */
 	int flags;
 	unsigned long time_expires;		/* in jiffies, set prior to sleeping */
-	struct Scsi_Host *next_timer;
 	int select_time;			/* timer in select for target response */
 	volatile Scsi_Cmnd *selecting;
 	struct work_struct coroutine;		/* our co-routine */
@@ -295,6 +293,7 @@ struct NCR5380_hostdata {
 static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
 #endif
 static int NCR5380_init(struct Scsi_Host *instance, int flags);
+static void NCR5380_exit(struct Scsi_Host *instance);
 static void NCR5380_information_transfer(struct Scsi_Host *instance);
 #ifndef DONT_USE_INTR
 static irqreturn_t NCR5380_intr(int irq, void *dev_id, struct pt_regs *regs);

drivers/scsi/aacraid/commctrl.c

@@ -480,7 +480,7 @@ int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
 	default:
 		data_dir = DMA_NONE;
 	}
-	if (dev->pae_support == 1) {
+	if (dev->dac_support == 1) {
 		struct sgmap64* psg = (struct sgmap64*)&srbcmd->sg;
 		byte_count = 0;
 

drivers/scsi/aacraid/commsup.c

@@ -761,7 +761,7 @@ void aac_printf(struct aac_dev *dev, u32 val)
 		length = 255;
 	if (cp[length] != 0)
 		cp[length] = 0;
-	if (level == LOG_HIGH_ERROR)
+	if (level == LOG_AAC_HIGH_ERROR)
 		printk(KERN_WARNING "aacraid:%s", cp);
 	else
 		printk(KERN_INFO "aacraid:%s", cp);

drivers/scsi/megaraid/Makefile

+obj-$(CONFIG_MEGARAID_MM)	+= megaraid_mm.o
+obj-$(CONFIG_MEGARAID_MAILBOX)	+= megaraid_mbox.o