Commit bdf1ad71 authored by Russell King's avatar Russell King

[ARM] Update Acorn platform scsi drivers.

These were broken by two changes - the removal of the old device model
class code, and when scsi device lists appeared.  This cset allows
these drivers to build again.  We also drop some unnecessary code
from one of the drivers.
parent a4870a51
...@@ -2934,23 +2934,21 @@ int acornscsi_proc_info(char *buffer, char **start, off_t offset, ...@@ -2934,23 +2934,21 @@ int acornscsi_proc_info(char *buffer, char **start, off_t offset,
p += sprintf(p, "\nAttached devices:\n"); p += sprintf(p, "\nAttached devices:\n");
list_for_each_entry(scd, &instance->my_devices, siblings) { list_for_each_entry(scd, &instance->my_devices, siblings) {
int len; p += sprintf(p, "Device/Lun TaggedQ Sync\n");
p += sprintf(p, " %d/%d ", scd->id, scd->lun);
proc_print_scsidevice(scd, p, &len, 0);
p += len;
p += sprintf(p, "Extensions: ");
if (scd->tagged_supported) if (scd->tagged_supported)
p += sprintf(p, "TAG %sabled [%d] ", p += sprintf(p, "%3sabled(%3d) ",
scd->tagged_queue ? "en" : "dis", scd->current_tag); scd->tagged_queue ? "en" : "dis",
p += sprintf(p, "\nTransfers: "); scd->current_tag);
else
p += sprintf(p, "unsupported ");
if (host->device[scd->id].sync_xfer & 15) if (host->device[scd->id].sync_xfer & 15)
p += sprintf(p, "sync, offset %d, %d ns\n", p += sprintf(p, "offset %d, %d ns\n",
host->device[scd->id].sync_xfer & 15, host->device[scd->id].sync_xfer & 15,
acornscsi_getperiod(host->device[scd->id].sync_xfer)); acornscsi_getperiod(host->device[scd->id].sync_xfer));
else else
p += sprintf(p, "async\n"); p += sprintf(p, "async\n");
pos = p - buffer; pos = p - buffer;
if (pos + begin < offset) { if (pos + begin < offset) {
...@@ -3106,7 +3104,6 @@ static struct ecard_driver acornscsi_driver = { ...@@ -3106,7 +3104,6 @@ static struct ecard_driver acornscsi_driver = {
.remove = __devexit_p(acornscsi_remove), .remove = __devexit_p(acornscsi_remove),
.id_table = acornscsi_cids, .id_table = acornscsi_cids,
.drv = { .drv = {
.devclass = &shost_devclass,
.name = "acornscsi", .name = "acornscsi",
}, },
}; };
......
...@@ -298,7 +298,6 @@ typedef struct acornscsi_hostdata { ...@@ -298,7 +298,6 @@ typedef struct acornscsi_hostdata {
unsigned short last_message; /* last message to be sent */ unsigned short last_message; /* last message to be sent */
unsigned char disconnectable:1; /* this command can be disconnected */ unsigned char disconnectable:1; /* this command can be disconnected */
unsigned char interrupt:1; /* interrupt active */
} scsi; } scsi;
/* statistics information */ /* statistics information */
......
...@@ -29,6 +29,7 @@ ...@@ -29,6 +29,7 @@
#include <linux/stat.h> #include <linux/stat.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/dma.h> #include <asm/dma.h>
#include <asm/io.h> #include <asm/io.h>
...@@ -238,10 +239,10 @@ static int ...@@ -238,10 +239,10 @@ static int
arxescsi_proc_info(char *buffer, char **start, off_t offset, int length, arxescsi_proc_info(char *buffer, char **start, off_t offset, int length,
int host_no, int inout) int host_no, int inout)
{ {
int pos, begin;
struct Scsi_Host *host; struct Scsi_Host *host;
struct arxescsi_info *info; struct arxescsi_info *info;
Scsi_Device *scd; char *p = buffer;
int pos;
host = scsi_host_hn_get(host_no); host = scsi_host_hn_get(host_no);
if (!host) if (!host)
...@@ -251,26 +252,13 @@ arxescsi_proc_info(char *buffer, char **start, off_t offset, int length, ...@@ -251,26 +252,13 @@ arxescsi_proc_info(char *buffer, char **start, off_t offset, int length,
if (inout == 1) if (inout == 1)
return -EINVAL; return -EINVAL;
begin = 0; p += sprintf(p, "ARXE 16-bit SCSI driver v%s\n", VERSION);
pos = sprintf(buffer, "ARXE 16-bit SCSI driver v%s\n", VERSION); p += fas216_print_host(&info->info, p);
pos += fas216_print_host(&info->info, buffer + pos); p += fas216_print_stats(&info->info, p);
pos += fas216_print_stats(&info->info, buffer + pos); p += fas216_print_devices(&info->info, p);
pos += sprintf (buffer+pos, "\nAttached devices:\n"); *start = buffer + offset;
pos = p - buffer - offset;
list_for_each_entry(scd, &host->my_devices, siblings) {
pos += fas216_print_device(&info->info, scd, buffer + pos);
if (pos + begin < offset) {
begin += pos;
pos = 0;
}
if (pos + begin > offset + length)
break;
}
*start = buffer + (offset - begin);
pos -= offset - begin;
if (pos > length) if (pos > length)
pos = length; pos = length;
...@@ -397,7 +385,6 @@ static struct ecard_driver arxescsi_driver = { ...@@ -397,7 +385,6 @@ static struct ecard_driver arxescsi_driver = {
.remove = __devexit_p(arxescsi_remove), .remove = __devexit_p(arxescsi_remove),
.id_table = arxescsi_cids, .id_table = arxescsi_cids,
.drv = { .drv = {
.devclass = &shost_devclass,
.name = "arxescsi", .name = "arxescsi",
}, },
}; };
......
...@@ -334,7 +334,6 @@ static struct ecard_driver cumanascsi1_driver = { ...@@ -334,7 +334,6 @@ static struct ecard_driver cumanascsi1_driver = {
.remove = __devexit_p(cumanascsi1_remove), .remove = __devexit_p(cumanascsi1_remove),
.id_table = cumanascsi1_cids, .id_table = cumanascsi1_cids,
.drv = { .drv = {
.devclass = &shost_devclass,
.name = "cumanascsi1", .name = "cumanascsi1",
}, },
}; };
......
...@@ -356,10 +356,10 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length) ...@@ -356,10 +356,10 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
int cumanascsi_2_proc_info (char *buffer, char **start, off_t offset, int cumanascsi_2_proc_info (char *buffer, char **start, off_t offset,
int length, int host_no, int inout) int length, int host_no, int inout)
{ {
int pos, begin;
struct Scsi_Host *host; struct Scsi_Host *host;
struct cumanascsi2_info *info; struct cumanascsi2_info *info;
Scsi_Device *scd; char *p = buffer;
int pos;
host = scsi_host_hn_get(host_no); host = scsi_host_hn_get(host_no);
if (!host) if (!host)
...@@ -370,38 +370,16 @@ int cumanascsi_2_proc_info (char *buffer, char **start, off_t offset, ...@@ -370,38 +370,16 @@ int cumanascsi_2_proc_info (char *buffer, char **start, off_t offset,
info = (struct cumanascsi2_info *)host->hostdata; info = (struct cumanascsi2_info *)host->hostdata;
begin = 0; p += sprintf(p, "Cumana SCSI II driver v%s\n", VERSION);
pos = sprintf(buffer, "Cumana SCSI II driver v%s\n", VERSION); p += fas216_print_host(&info->info, p);
pos += fas216_print_host(&info->info, buffer + pos); p += sprintf(p, "Term : o%s\n",
pos += sprintf(buffer + pos, "Term : o%s\n",
info->terms ? "n" : "ff"); info->terms ? "n" : "ff");
pos += fas216_print_stats(&info->info, buffer + pos); p += fas216_print_stats(&info->info, p);
p += fas216_print_devices(&info->info, p);
pos += sprintf(buffer+pos, "\nAttached devices:\n"); *start = buffer + offset;
pos = p - buffer - offset;
list_for_each_entry(scd, &host->my_devices, siblings) {
int len;
proc_print_scsidevice(scd, buffer, &len, pos);
pos += len;
pos += sprintf(buffer+pos, "Extensions: ");
if (scd->tagged_supported)
pos += sprintf(buffer+pos, "TAG %sabled [%d] ",
scd->tagged_queue ? "en" : "dis",
scd->current_tag);
pos += sprintf(buffer+pos, "\n");
if (pos + begin < offset) {
begin += pos;
pos = 0;
}
if (pos + begin > offset + length)
break;
}
*start = buffer + (offset - begin);
pos -= offset - begin;
if (pos > length) if (pos > length)
pos = length; pos = length;
...@@ -572,7 +550,6 @@ static struct ecard_driver cumanascsi2_driver = { ...@@ -572,7 +550,6 @@ static struct ecard_driver cumanascsi2_driver = {
.remove = __devexit_p(cumanascsi2_remove), .remove = __devexit_p(cumanascsi2_remove),
.id_table = cumanascsi2_cids, .id_table = cumanascsi2_cids,
.drv = { .drv = {
.devclass = &shost_devclass,
.name = "cumanascsi2", .name = "cumanascsi2",
}, },
}; };
......
...@@ -430,10 +430,10 @@ eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) ...@@ -430,10 +430,10 @@ eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
int eesoxscsi_proc_info(char *buffer, char **start, off_t offset, int eesoxscsi_proc_info(char *buffer, char **start, off_t offset,
int length, int host_no, int inout) int length, int host_no, int inout)
{ {
int pos, begin;
struct Scsi_Host *host; struct Scsi_Host *host;
struct eesoxscsi_info *info; struct eesoxscsi_info *info;
Scsi_Device *scd; char *p = buffer;
int pos;
host = scsi_host_hn_get(host_no); host = scsi_host_hn_get(host_no);
if (!host) if (!host)
...@@ -444,35 +444,16 @@ int eesoxscsi_proc_info(char *buffer, char **start, off_t offset, ...@@ -444,35 +444,16 @@ int eesoxscsi_proc_info(char *buffer, char **start, off_t offset,
info = (struct eesoxscsi_info *)host->hostdata; info = (struct eesoxscsi_info *)host->hostdata;
begin = 0; p += sprintf(p, "EESOX SCSI driver v%s\n", VERSION);
pos = sprintf(buffer, "EESOX SCSI driver v%s\n", VERSION); p += fas216_print_host(&info->info, p);
pos += fas216_print_host(&info->info, buffer + pos); p += sprintf(p, "Term : o%s\n",
pos += sprintf(buffer + pos, "Term : o%s\n",
info->control & EESOX_TERM_ENABLE ? "n" : "ff"); info->control & EESOX_TERM_ENABLE ? "n" : "ff");
pos += fas216_print_stats(&info->info, buffer + pos); p += fas216_print_stats(&info->info, p);
p += fas216_print_devices(&info->info, p);
pos += sprintf(buffer+pos, "\nAttached devices:\n"); *start = buffer + offset;
pos = p - buffer - offset;
list_for_each_entry(scd, &host->my_devices, siblings) {
int len;
proc_print_scsidevice(scd, buffer, &len, pos);
pos += len;
pos += sprintf(buffer+pos, "Extensions: ");
if (scd->tagged_supported)
pos += sprintf(buffer+pos, "TAG %sabled [%d] ",
scd->tagged_queue ? "en" : "dis",
scd->current_tag);
pos += sprintf (buffer+pos, "\n");
if (pos + begin < offset) {
begin += pos;
pos = 0;
}
}
*start = buffer + (offset - begin);
pos -= offset - begin;
if (pos > length) if (pos > length)
pos = length; pos = length;
...@@ -679,7 +660,6 @@ static struct ecard_driver eesoxscsi_driver = { ...@@ -679,7 +660,6 @@ static struct ecard_driver eesoxscsi_driver = {
.remove = __devexit_p(eesoxscsi_remove), .remove = __devexit_p(eesoxscsi_remove),
.id_table = eesoxscsi_cids, .id_table = eesoxscsi_cids,
.drv = { .drv = {
.devclass = &shost_devclass,
.name = "eesoxscsi", .name = "eesoxscsi",
}, },
}; };
......
...@@ -44,6 +44,7 @@ ...@@ -44,6 +44,7 @@
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/bitops.h> #include <linux/bitops.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/dma.h> #include <asm/dma.h>
#include <asm/io.h> #include <asm/io.h>
...@@ -79,7 +80,6 @@ ...@@ -79,7 +80,6 @@
* I was thinking that this was a good chip until I found this restriction ;( * I was thinking that this was a good chip until I found this restriction ;(
*/ */
#define SCSI2_SYNC #define SCSI2_SYNC
#undef SCSI2_WIDE
#undef SCSI2_TAG #undef SCSI2_TAG
#undef DEBUG_CONNECT #undef DEBUG_CONNECT
...@@ -96,6 +96,8 @@ ...@@ -96,6 +96,8 @@
static int level_mask = LOG_ERROR; static int level_mask = LOG_ERROR;
MODULE_PARM(level_mask, "i");
static int __init fas216_log_setup(char *str) static int __init fas216_log_setup(char *str)
{ {
char *s; char *s;
...@@ -199,10 +201,8 @@ static void fas216_dumpinfo(FAS216_Info *info) ...@@ -199,10 +201,8 @@ static void fas216_dumpinfo(FAS216_Info *info)
info->scsi.io_port, info->scsi.io_shift, info->scsi.irq, info->scsi.io_port, info->scsi.io_shift, info->scsi.irq,
info->scsi.cfg[0], info->scsi.cfg[1], info->scsi.cfg[2], info->scsi.cfg[0], info->scsi.cfg[1], info->scsi.cfg[2],
info->scsi.cfg[3]); info->scsi.cfg[3]);
printk(" type=%p phase=%X reconnected={ target=%d lun=%d tag=%d }\n", printk(" type=%p phase=%X\n",
info->scsi.type, info->scsi.phase, info->scsi.type, info->scsi.phase);
info->scsi.reconnected.target,
info->scsi.reconnected.lun, info->scsi.reconnected.tag);
print_SCp(&info->scsi.SCp, " SCp={ ", " }\n"); print_SCp(&info->scsi.SCp, " SCp={ ", " }\n");
printk(" msgs async_stp=%X disconnectable=%d aborting=%d }\n", printk(" msgs async_stp=%X disconnectable=%d aborting=%d }\n",
info->scsi.async_stp, info->scsi.async_stp,
...@@ -265,21 +265,24 @@ static const char *fas216_bus_phase(int stat) ...@@ -265,21 +265,24 @@ static const char *fas216_bus_phase(int stat)
static const char *fas216_drv_phase(FAS216_Info *info) static const char *fas216_drv_phase(FAS216_Info *info)
{ {
switch (info->scsi.phase) { static const char *phases[] = {
case PHASE_IDLE: return "idle"; [PHASE_IDLE] = "idle",
case PHASE_SELECTION: return "selection"; [PHASE_SELECTION] = "selection",
case PHASE_COMMAND: return "command"; [PHASE_COMMAND] = "command",
case PHASE_RECONNECTED: return "reconnected"; [PHASE_DATAOUT] = "data out",
case PHASE_DATAOUT: return "data out"; [PHASE_DATAIN] = "data in",
case PHASE_DATAIN: return "data in"; [PHASE_MSGIN] = "message in",
case PHASE_MSGIN: return "message in"; [PHASE_MSGIN_DISCONNECT]= "disconnect",
case PHASE_MSGIN_DISCONNECT: return "disconnect"; [PHASE_MSGOUT_EXPECT] = "expect message out",
case PHASE_MSGOUT_EXPECT: return "expect message out"; [PHASE_MSGOUT] = "message out",
case PHASE_MSGOUT: return "message out"; [PHASE_STATUS] = "status",
case PHASE_STATUS: return "status"; [PHASE_DONE] = "done",
case PHASE_DONE: return "done"; };
default: return "???";
} if (info->scsi.phase < ARRAY_SIZE(phases) &&
phases[info->scsi.phase])
return phases[info->scsi.phase];
return "???";
} }
static char fas216_target(FAS216_Info *info) static char fas216_target(FAS216_Info *info)
...@@ -406,25 +409,6 @@ static void print_debug_list(void) ...@@ -406,25 +409,6 @@ static void print_debug_list(void)
static void fas216_done(FAS216_Info *info, unsigned int result); static void fas216_done(FAS216_Info *info, unsigned int result);
/**
* fas216_clockrate - calculate clock conversion factor
* @clock: clock speed in MHz
*
* Calculate correct value to be written into clock conversion factor
* register. Returns CLKF_ value.
*/
static int fas216_clockrate(int clock)
{
if (clock <= 10 || clock > 40) {
printk(KERN_CRIT
"fas216: invalid clock rate: check your driver!\n");
clock = -1;
} else
clock = ((clock - 1) / 5 + 1) & 7;
return clock;
}
/** /**
* fas216_get_last_msg - retrive last message from the list * fas216_get_last_msg - retrive last message from the list
* @info: interface to search * @info: interface to search
...@@ -640,105 +624,6 @@ static void fas216_handlesync(FAS216_Info *info, char *msg) ...@@ -640,105 +624,6 @@ static void fas216_handlesync(FAS216_Info *info, char *msg)
} }
} }
/**
* fas216_handlewide - Handle a wide transfer message
* @info: state structure for interface
* @msg: message from target
*
* Handle a wide transfer message from the target
*/
static void fas216_handlewide(FAS216_Info *info, char *msg)
{
struct fas216_device *dev = &info->device[info->SCpnt->device->id];
enum { wide, bit8, none, reject } res = none;
#ifdef SCSI2_WIDE
switch (msg[0]) {
case MESSAGE_REJECT:
/* Wide transfer request failed.
* Note: SCSI II r10:
*
* SCSI devices that are capable of wide
* data transfers shall not respond to a
* WDTR message with a MESSAGE REJECT message.
*
* Hence, if we get this condition, we never
* reattempt negotiation for this device.
*/
if (dev->wide_state == neg_inprogress) {
dev->wide_state = neg_invalid;
res = bit8;
}
break;
case EXTENDED_MESSAGE:
switch (dev->wide_state) {
/* We don't accept wide data transfer requests.
* Respond with a MESSAGE REJECT to prevent a
* wide data transfer agreement from being reached.
*/
case neg_invalid:
res = reject;
break;
/* We were not negotiating a wide data transfer,
* but the device sent is a negotiation request.
* Honour the request by sending back a WDTR
* message containing our capability, limited by
* the targets capability.
*/
default:
fas216_cmd(info, CMD_SETATN);
if (msg[3] > info->ifcfg.wide_max_size)
msg[3] = info->ifcfg.wide_max_size;
msgqueue_flush(&info->scsi.msgs);
msgqueue_addmsg(&info->scsi.msgs, 4,
EXTENDED_MESSAGE, 2, EXTENDED_WDTR,
msg[3]);
info->scsi.phase = PHASE_MSGOUT_EXPECT;
res = wide;
break;
/* We initiated the wide data transfer negotiation,
* and have successfully received a response from the
* target. The synchronous transfer agreement has been
* reached. Note: if the values returned are out of our
* bounds, we must reject the message.
*/
case neg_inprogress:
res = reject;
if (msg[3] <= info->ifcfg.wide_max_size) {
dev->wide_state = neg_complete;
res = wide;
}
break;
}
}
#else
res = reject;
#endif
switch (res) {
case wide:
dev->wide_xfer = msg[3];
break;
case reject:
fas216_cmd(info, CMD_SETATN);
msgqueue_flush(&info->scsi.msgs);
msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT);
info->scsi.phase = PHASE_MSGOUT_EXPECT;
case bit8:
dev->wide_xfer = 0;
break;
case none:
break;
}
}
/** /**
* fas216_updateptrs - update data pointers after transfer suspended/paused * fas216_updateptrs - update data pointers after transfer suspended/paused
* @info: interface's local pointer to update * @info: interface's local pointer to update
...@@ -993,6 +878,8 @@ static void fas216_aborttransfer(FAS216_Info *info) ...@@ -993,6 +878,8 @@ static void fas216_aborttransfer(FAS216_Info *info)
fas216_cmd(info, CMD_FLUSHFIFO); fas216_cmd(info, CMD_FLUSHFIFO);
} }
static void fas216_kick(FAS216_Info *info);
/** /**
* fas216_disconnected_intr - handle device disconnection * fas216_disconnected_intr - handle device disconnection
* @info: interface from which device disconnected from * @info: interface from which device disconnected from
...@@ -1001,6 +888,8 @@ static void fas216_aborttransfer(FAS216_Info *info) ...@@ -1001,6 +888,8 @@ static void fas216_aborttransfer(FAS216_Info *info)
*/ */
static void fas216_disconnect_intr(FAS216_Info *info) static void fas216_disconnect_intr(FAS216_Info *info)
{ {
unsigned long flags;
fas216_checkmagic(info); fas216_checkmagic(info);
fas216_log(info, LOG_CONNECT, "disconnect phase=%02x", fas216_log(info, LOG_CONNECT, "disconnect phase=%02x",
...@@ -1008,8 +897,6 @@ static void fas216_disconnect_intr(FAS216_Info *info) ...@@ -1008,8 +897,6 @@ static void fas216_disconnect_intr(FAS216_Info *info)
msgqueue_flush(&info->scsi.msgs); msgqueue_flush(&info->scsi.msgs);
fas216_cmd(info, CMD_ENABLESEL);
switch (info->scsi.phase) { switch (info->scsi.phase) {
case PHASE_SELECTION: /* while selecting - no target */ case PHASE_SELECTION: /* while selecting - no target */
case PHASE_SELSTEPS: case PHASE_SELSTEPS:
...@@ -1018,9 +905,12 @@ static void fas216_disconnect_intr(FAS216_Info *info) ...@@ -1018,9 +905,12 @@ static void fas216_disconnect_intr(FAS216_Info *info)
case PHASE_MSGIN_DISCONNECT: /* message in - disconnecting */ case PHASE_MSGIN_DISCONNECT: /* message in - disconnecting */
info->scsi.disconnectable = 1; info->scsi.disconnectable = 1;
info->scsi.reconnected.tag = 0;
info->scsi.phase = PHASE_IDLE; info->scsi.phase = PHASE_IDLE;
info->stats.disconnects += 1; info->stats.disconnects += 1;
spin_lock_irqsave(&info->host_lock, flags);
if (info->scsi.phase == PHASE_IDLE)
fas216_kick(info);
spin_unlock_irqrestore(&info->host_lock, flags);
break; break;
case PHASE_DONE: /* at end of command - complete */ case PHASE_DONE: /* at end of command - complete */
...@@ -1053,122 +943,61 @@ static void fas216_disconnect_intr(FAS216_Info *info) ...@@ -1053,122 +943,61 @@ static void fas216_disconnect_intr(FAS216_Info *info)
static void static void
fas216_reselected_intr(FAS216_Info *info) fas216_reselected_intr(FAS216_Info *info)
{ {
unsigned char target, identify_msg, ok; unsigned int cfis, i;
unsigned char msg[4];
unsigned char target, lun, tag;
fas216_checkmagic(info); fas216_checkmagic(info);
if ((info->scsi.phase == PHASE_SELECTION || WARN_ON(info->scsi.phase == PHASE_SELECTION ||
info->scsi.phase == PHASE_SELSTEPS) && info->SCpnt) { info->scsi.phase == PHASE_SELSTEPS);
Scsi_Cmnd *SCpnt = info->SCpnt;
info->origSCpnt = SCpnt; cfis = fas216_readb(info, REG_CFIS);
info->SCpnt = NULL;
if (info->device[SCpnt->device->id].wide_state == neg_inprogress) fas216_log(info, LOG_CONNECT, "reconnect phase=%02x cfis=%02x",
info->device[SCpnt->device->id].wide_state = neg_wait; info->scsi.phase, cfis);
if (info->device[SCpnt->device->id].sync_state == neg_inprogress)
info->device[SCpnt->device->id].sync_state = neg_wait;
}
fas216_log(info, LOG_CONNECT, "reconnect phase=%02X", info->scsi.phase); cfis &= CFIS_CF;
if ((fas216_readb(info, REG_CFIS) & CFIS_CF) != 2) { if (cfis < 2 || cfis > 4) {
printk(KERN_ERR "scsi%d.H: incorrect number of bytes after reselect\n", printk(KERN_ERR "scsi%d.H: incorrect number of bytes after reselect\n",
info->host->host_no); info->host->host_no);
goto initiator_error; goto bad_message;
}
target = fas216_readb(info, REG_FF);
identify_msg = fas216_readb(info, REG_FF);
ok = 1;
if (!(target & (1 << info->host->this_id))) {
printk(KERN_ERR "scsi%d.H: invalid host id on reselect\n", info->host->host_no);
ok = 0;
} }
if (!(identify_msg & 0x80)) { for (i = 0; i < cfis; i++)
printk(KERN_ERR "scsi%d.H: no IDENTIFY message on reselect, got msg %02X\n", msg[i] = fas216_readb(info, REG_FF);
info->host->host_no, identify_msg);
ok = 0;
}
if (!ok) { if (!(msg[0] & (1 << info->host->this_id)) ||
/* !(msg[1] & 0x80))
* Something went wrong - send an initiator error to
* the target.
*/
goto initiator_error; goto initiator_error;
}
target &= ~(1 << info->host->this_id); target = msg[0] & ~(1 << info->host->this_id);
target = ffs(target) - 1; target = ffs(target) - 1;
lun = msg[1] & 7;
tag = 0;
identify_msg &= 7; if (cfis >= 3) {
info->scsi.reconnected.target = target; if (msg[2] != SIMPLE_QUEUE_TAG)
info->scsi.reconnected.lun = identify_msg; goto initiator_error;
info->scsi.reconnected.tag = 0;
/* set up for synchronous transfers */ tag = msg[3];
fas216_set_sync(info, target);
ok = 0;
if (info->scsi.disconnectable && info->SCpnt &&
info->SCpnt->device->id == target && info->SCpnt->device->lun == identify_msg)
ok = 1;
if (!ok && queue_probetgtlun(&info->queues.disconnected, target, identify_msg))
ok = 1;
msgqueue_flush(&info->scsi.msgs);
if (ok) {
info->scsi.phase = PHASE_RECONNECTED;
fas216_writeb(info, REG_SDID, target);
} else {
/*
* Our command structure not found - abort the
* command on the target. Since we have no
* record of this command, we can't send
* an INITIATOR DETECTED ERROR message.
*/
fas216_cmd(info, CMD_SETATN);
msgqueue_addmsg(&info->scsi.msgs, 1, ABORT);
info->scsi.phase = PHASE_MSGOUT_EXPECT;
} }
fas216_cmd(info, CMD_MSGACCEPTED); /* set up for synchronous transfers */
return; fas216_writeb(info, REG_SDID, target);
fas216_set_sync(info, target);
initiator_error:
fas216_cmd(info, CMD_SETATN);
msgqueue_flush(&info->scsi.msgs); msgqueue_flush(&info->scsi.msgs);
msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
info->scsi.phase = PHASE_MSGOUT_EXPECT;
fas216_cmd(info, CMD_MSGACCEPTED);
}
/**
* fas216_finish_reconnect - finish reconnection sequence for device
* @info: interface which caused function done interrupt
*
* Finish reconnection sequence for device
*/
static void
fas216_finish_reconnect(FAS216_Info *info)
{
fas216_checkmagic(info);
fas216_log(info, LOG_CONNECT, "Connected: %1x %1x %02x, reconnected: %1x %1x %02x", fas216_log(info, LOG_CONNECT, "Reconnected: target %1x lun %1x tag %02x",
info->SCpnt->device->id, info->SCpnt->device->lun, info->SCpnt->tag, target, lun, tag);
info->scsi.reconnected.target, info->scsi.reconnected.lun,
info->scsi.reconnected.tag);
if (info->scsi.disconnectable && info->SCpnt) { if (info->scsi.disconnectable && info->SCpnt) {
info->scsi.disconnectable = 0; info->scsi.disconnectable = 0;
if (info->SCpnt->device->id == info->scsi.reconnected.target && if (info->SCpnt->device->id == target &&
info->SCpnt->device->lun == info->scsi.reconnected.lun && info->SCpnt->device->lun == lun &&
info->SCpnt->tag == info->scsi.reconnected.tag) { info->SCpnt->tag == tag) {
fas216_log(info, LOG_CONNECT, "reconnected"); fas216_log(info, LOG_CONNECT, "reconnected previously executing command");
} else { } else {
queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt); queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
fas216_log(info, LOG_CONNECT, "had to move command to disconnected queue"); fas216_log(info, LOG_CONNECT, "had to move command to disconnected queue");
...@@ -1177,32 +1006,53 @@ fas216_finish_reconnect(FAS216_Info *info) ...@@ -1177,32 +1006,53 @@ fas216_finish_reconnect(FAS216_Info *info)
} }
if (!info->SCpnt) { if (!info->SCpnt) {
info->SCpnt = queue_remove_tgtluntag(&info->queues.disconnected, info->SCpnt = queue_remove_tgtluntag(&info->queues.disconnected,
info->scsi.reconnected.target, target, lun, tag);
info->scsi.reconnected.lun,
info->scsi.reconnected.tag);
fas216_log(info, LOG_CONNECT, "had to get command"); fas216_log(info, LOG_CONNECT, "had to get command");
} }
if (!info->SCpnt) {
if (info->SCpnt) {
/*
* Restore data pointer from SAVED data pointer
*/
info->scsi.SCp = info->SCpnt->SCp;
fas216_log(info, LOG_CONNECT, "data pointers: [%p, %X]",
info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
info->scsi.phase = PHASE_MSGIN;
} else {
/*
* Our command structure not found - abort the
* command on the target. Since we have no
* record of this command, we can't send
* an INITIATOR DETECTED ERROR message.
*/
fas216_cmd(info, CMD_SETATN); fas216_cmd(info, CMD_SETATN);
msgqueue_flush(&info->scsi.msgs);
#if 0 #if 0
if (info->scsi.reconnected.tag) if (tag)
msgqueue_addmsg(&info->scsi.msgs, 2, ABORT_TAG, info->scsi.reconnected.tag); msgqueue_addmsg(&info->scsi.msgs, 2, ABORT_TAG, tag);
else else
#endif #endif
msgqueue_addmsg(&info->scsi.msgs, 1, ABORT); msgqueue_addmsg(&info->scsi.msgs, 1, ABORT);
info->scsi.phase = PHASE_MSGOUT_EXPECT; info->scsi.phase = PHASE_MSGOUT_EXPECT;
info->scsi.aborting = 1; info->scsi.aborting = 1;
} else {
/*
* Restore data pointer from SAVED data pointer
*/
info->scsi.SCp = info->SCpnt->SCp;
fas216_log(info, LOG_CONNECT, "data pointers: [%p, %X]",
info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
} }
fas216_cmd(info, CMD_MSGACCEPTED);
return;
initiator_error:
printk(KERN_ERR "scsi%d.H: error during reselection: bytes",
info->host->host_no);
for (i = 0; i < cfis; i++)
printk(" %02x", msg[i]);
printk("\n");
bad_message:
fas216_cmd(info, CMD_SETATN);
msgqueue_flush(&info->scsi.msgs);
msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
info->scsi.phase = PHASE_MSGOUT_EXPECT;
fas216_cmd(info, CMD_MSGACCEPTED);
} }
static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int msglen) static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int msglen)
...@@ -1267,10 +1117,6 @@ static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int ...@@ -1267,10 +1117,6 @@ static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int
fas216_handlesync(info, message); fas216_handlesync(info, message);
break; break;
case EXTENDED_MESSAGE | EXTENDED_WDTR << 8:
fas216_handlewide(info, message);
break;
default: default:
fas216_log(info, 0, "reject, last message 0x%04x", fas216_log(info, 0, "reject, last message 0x%04x",
fas216_get_last_msg(info, info->scsi.msgin_fifo)); fas216_get_last_msg(info, info->scsi.msgin_fifo));
...@@ -1280,14 +1126,6 @@ static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int ...@@ -1280,14 +1126,6 @@ static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int
case NOP: case NOP:
break; break;
case SIMPLE_QUEUE_TAG:
if (msglen < 2)
goto unrecognised;
/* handled above - print a warning since this is untested */
fas216_log(info, 0, "reconnect queue tag 0x%02x", message[1]);
break;
case EXTENDED_MESSAGE: case EXTENDED_MESSAGE:
if (msglen < 3) if (msglen < 3)
goto unrecognised; goto unrecognised;
...@@ -1297,10 +1135,6 @@ static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int ...@@ -1297,10 +1135,6 @@ static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int
fas216_handlesync(info, message); fas216_handlesync(info, message);
break; break;
case EXTENDED_WDTR: /* Wide transfer negotiation request/reply */
fas216_handlewide(info, message);
break;
default: default:
goto unrecognised; goto unrecognised;
} }
...@@ -1437,13 +1271,6 @@ static void fas216_message(FAS216_Info *info) ...@@ -1437,13 +1271,6 @@ static void fas216_message(FAS216_Info *info)
} }
#endif #endif
if (info->scsi.phase == PHASE_RECONNECTED) {
if (message[0] == SIMPLE_QUEUE_TAG)
info->scsi.reconnected.tag = message[1];
fas216_finish_reconnect(info);
info->scsi.phase = PHASE_MSGIN;
}
fas216_parse_message(info, message, msglen); fas216_parse_message(info, message, msglen);
fas216_cmd(info, CMD_MSGACCEPTED); fas216_cmd(info, CMD_MSGACCEPTED);
return; return;
...@@ -1521,26 +1348,26 @@ static void fas216_send_messageout(FAS216_Info *info, int start) ...@@ -1521,26 +1348,26 @@ static void fas216_send_messageout(FAS216_Info *info, int start)
* fas216_busservice_intr - handle bus service interrupt from FAS216 chip * fas216_busservice_intr - handle bus service interrupt from FAS216 chip
* @info: interface which caused bus service interrupt * @info: interface which caused bus service interrupt
* @stat: Status register contents * @stat: Status register contents
* @ssr: SCSI Status register contents * @is: SCSI Status register contents
* *
* Handle a bus service interrupt from FAS216 chip * Handle a bus service interrupt from FAS216 chip
*/ */
static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigned int ssr) static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigned int is)
{ {
fas216_checkmagic(info); fas216_checkmagic(info);
fas216_log(info, LOG_BUSSERVICE, fas216_log(info, LOG_BUSSERVICE,
"bus service: stat=%02x ssr=%02x phase=%02x", "bus service: stat=%02x is=%02x phase=%02x",
stat, ssr, info->scsi.phase); stat, is, info->scsi.phase);
switch (info->scsi.phase) { switch (info->scsi.phase) {
case PHASE_SELECTION: case PHASE_SELECTION:
if ((ssr & IS_BITS) != IS_MSGBYTESENT) if ((is & IS_BITS) != IS_MSGBYTESENT)
goto bad_is; goto bad_is;
break; break;
case PHASE_SELSTEPS: case PHASE_SELSTEPS:
switch (ssr & IS_BITS) { switch (is & IS_BITS) {
case IS_SELARB: case IS_SELARB:
case IS_MSGBYTESENT: case IS_MSGBYTESENT:
goto bad_is; goto bad_is;
...@@ -1566,9 +1393,6 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne ...@@ -1566,9 +1393,6 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
* as described by the SCSI II spec. * as described by the SCSI II spec.
*/ */
switch (STATE(stat & STAT_BUSMASK, info->scsi.phase)) { switch (STATE(stat & STAT_BUSMASK, info->scsi.phase)) {
/* Reselmsgin -> Data In */
case STATE(STAT_DATAIN, PHASE_RECONNECTED):
fas216_finish_reconnect(info);
case STATE(STAT_DATAIN, PHASE_SELSTEPS):/* Sel w/ steps -> Data In */ case STATE(STAT_DATAIN, PHASE_SELSTEPS):/* Sel w/ steps -> Data In */
case STATE(STAT_DATAIN, PHASE_MSGOUT): /* Message Out -> Data In */ case STATE(STAT_DATAIN, PHASE_MSGOUT): /* Message Out -> Data In */
case STATE(STAT_DATAIN, PHASE_COMMAND): /* Command -> Data In */ case STATE(STAT_DATAIN, PHASE_COMMAND): /* Command -> Data In */
...@@ -1583,9 +1407,6 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne ...@@ -1583,9 +1407,6 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
fas216_transfer(info); fas216_transfer(info);
return; return;
/* Reselmsgin -> Data Out */
case STATE(STAT_DATAOUT, PHASE_RECONNECTED):
fas216_finish_reconnect(info);
case STATE(STAT_DATAOUT, PHASE_SELSTEPS):/* Sel w/ steps-> Data Out */ case STATE(STAT_DATAOUT, PHASE_SELSTEPS):/* Sel w/ steps-> Data Out */
case STATE(STAT_DATAOUT, PHASE_MSGOUT): /* Message Out -> Data Out */ case STATE(STAT_DATAOUT, PHASE_MSGOUT): /* Message Out -> Data Out */
case STATE(STAT_DATAOUT, PHASE_COMMAND):/* Command -> Data Out */ case STATE(STAT_DATAOUT, PHASE_COMMAND):/* Command -> Data Out */
...@@ -1595,10 +1416,6 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne ...@@ -1595,10 +1416,6 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
fas216_transfer(info); fas216_transfer(info);
return; return;
/* Reselmsgin -> Status */
case STATE(STAT_STATUS, PHASE_RECONNECTED):
fas216_finish_reconnect(info);
goto status;
case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out -> Status */ case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out -> Status */
case STATE(STAT_STATUS, PHASE_DATAIN): /* Data In -> Status */ case STATE(STAT_STATUS, PHASE_DATAIN): /* Data In -> Status */
fas216_stoptransfer(info); fas216_stoptransfer(info);
...@@ -1606,7 +1423,6 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne ...@@ -1606,7 +1423,6 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
case STATE(STAT_STATUS, PHASE_MSGOUT): /* Message Out -> Status */ case STATE(STAT_STATUS, PHASE_MSGOUT): /* Message Out -> Status */
case STATE(STAT_STATUS, PHASE_COMMAND): /* Command -> Status */ case STATE(STAT_STATUS, PHASE_COMMAND): /* Command -> Status */
case STATE(STAT_STATUS, PHASE_MSGIN): /* Message In -> Status */ case STATE(STAT_STATUS, PHASE_MSGIN): /* Message In -> Status */
status:
fas216_cmd(info, CMD_INITCMDCOMPLETE); fas216_cmd(info, CMD_INITCMDCOMPLETE);
info->scsi.phase = PHASE_STATUS; info->scsi.phase = PHASE_STATUS;
return; return;
...@@ -1623,16 +1439,11 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne ...@@ -1623,16 +1439,11 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
info->scsi.phase = PHASE_MSGIN; info->scsi.phase = PHASE_MSGIN;
return; return;
/* Reselmsgin -> Message In */
case STATE(STAT_MESGIN, PHASE_RECONNECTED):
case STATE(STAT_MESGIN, PHASE_MSGIN): case STATE(STAT_MESGIN, PHASE_MSGIN):
info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF; info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
fas216_cmd(info, CMD_TRANSFERINFO); fas216_cmd(info, CMD_TRANSFERINFO);
return; return;
/* Reselmsgin -> Command */
case STATE(STAT_COMMAND, PHASE_RECONNECTED):
fas216_finish_reconnect(info);
case STATE(STAT_COMMAND, PHASE_MSGOUT): /* Message Out -> Command */ case STATE(STAT_COMMAND, PHASE_MSGOUT): /* Message Out -> Command */
case STATE(STAT_COMMAND, PHASE_MSGIN): /* Message In -> Command */ case STATE(STAT_COMMAND, PHASE_MSGIN): /* Message In -> Command */
fas216_send_command(info); fas216_send_command(info);
...@@ -1722,7 +1533,7 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne ...@@ -1722,7 +1533,7 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
return; return;
bad_is: bad_is:
fas216_log(info, 0, "bus service at step %d?", ssr & IS_BITS); fas216_log(info, 0, "bus service at step %d?", is & IS_BITS);
fas216_dumpstate(info); fas216_dumpstate(info);
print_debug_list(); print_debug_list();
...@@ -1733,37 +1544,40 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne ...@@ -1733,37 +1544,40 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
* fas216_funcdone_intr - handle a function done interrupt from FAS216 chip * fas216_funcdone_intr - handle a function done interrupt from FAS216 chip
* @info: interface which caused function done interrupt * @info: interface which caused function done interrupt
* @stat: Status register contents * @stat: Status register contents
* @ssr: SCSI Status register contents * @is: SCSI Status register contents
* *
* Handle a function done interrupt from FAS216 chip * Handle a function done interrupt from FAS216 chip
*/ */
static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned int ssr) static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned int is)
{ {
unsigned int fifo_len = fas216_readb(info, REG_CFIS) & CFIS_CF; unsigned int fifo_len = fas216_readb(info, REG_CFIS) & CFIS_CF;
unsigned int status, message;
fas216_checkmagic(info); fas216_checkmagic(info);
fas216_log(info, LOG_FUNCTIONDONE, fas216_log(info, LOG_FUNCTIONDONE,
"function done: stat=%02x ssr=%02x phase=%02x", "function done: stat=%02x is=%02x phase=%02x",
stat, ssr, info->scsi.phase); stat, is, info->scsi.phase);
switch (info->scsi.phase) { switch (info->scsi.phase) {
case PHASE_STATUS: /* status phase - read status and msg */ case PHASE_STATUS: /* status phase - read status and msg */
if (fifo_len != 2) { if (fifo_len != 2) {
fas216_log(info, 0, "odd number of bytes in FIFO: %d", fifo_len); fas216_log(info, 0, "odd number of bytes in FIFO: %d", fifo_len);
} }
status = fas216_readb(info, REG_FF); /*
message = fas216_readb(info, REG_FF); * Read status then message byte.
info->scsi.SCp.Message = message; */
info->scsi.SCp.Status = status; info->scsi.SCp.Status = fas216_readb(info, REG_FF);
info->scsi.SCp.Message = fas216_readb(info, REG_FF);
info->scsi.phase = PHASE_DONE; info->scsi.phase = PHASE_DONE;
fas216_cmd(info, CMD_MSGACCEPTED); fas216_cmd(info, CMD_MSGACCEPTED);
break; break;
case PHASE_IDLE: /* reselected? */ case PHASE_IDLE:
case PHASE_SELECTION:
case PHASE_SELSTEPS:
break;
case PHASE_MSGIN: /* message in phase */ case PHASE_MSGIN: /* message in phase */
case PHASE_RECONNECTED: /* reconnected command */
if ((stat & STAT_BUSMASK) == STAT_MESGIN) { if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
info->scsi.msgin_fifo = fifo_len; info->scsi.msgin_fifo = fifo_len;
fas216_message(info); fas216_message(info);
...@@ -1779,22 +1593,13 @@ static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned ...@@ -1779,22 +1593,13 @@ static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned
static void fas216_bus_reset(FAS216_Info *info) static void fas216_bus_reset(FAS216_Info *info)
{ {
neg_t sync_state, wide_state; neg_t sync_state;
int i; int i;
msgqueue_flush(&info->scsi.msgs); msgqueue_flush(&info->scsi.msgs);
info->scsi.reconnected.target = 0;
info->scsi.reconnected.lun = 0;
info->scsi.reconnected.tag = 0;
wide_state = neg_invalid;
sync_state = neg_invalid; sync_state = neg_invalid;
#ifdef SCSI2_WIDE
if (info->ifcfg.wide_max_size != 0)
wide_state = neg_wait;
#endif
#ifdef SCSI2_SYNC #ifdef SCSI2_SYNC
if (info->ifcfg.capabilities & (FASCAP_DMA|FASCAP_PSEUDODMA)) if (info->ifcfg.capabilities & (FASCAP_DMA|FASCAP_PSEUDODMA))
sync_state = neg_wait; sync_state = neg_wait;
...@@ -1807,7 +1612,6 @@ static void fas216_bus_reset(FAS216_Info *info) ...@@ -1807,7 +1612,6 @@ static void fas216_bus_reset(FAS216_Info *info)
for (i = 0; i < 8; i++) { for (i = 0; i < 8; i++) {
info->device[i].disconnect_ok = info->ifcfg.disconnect_ok; info->device[i].disconnect_ok = info->ifcfg.disconnect_ok;
info->device[i].sync_state = sync_state; info->device[i].sync_state = sync_state;
info->device[i].wide_state = wide_state;
info->device[i].period = info->ifcfg.asyncperiod / 4; info->device[i].period = info->ifcfg.asyncperiod / 4;
info->device[i].stp = info->scsi.async_stp; info->device[i].stp = info->scsi.async_stp;
info->device[i].sof = 0; info->device[i].sof = 0;
...@@ -1826,38 +1630,38 @@ static void fas216_bus_reset(FAS216_Info *info) ...@@ -1826,38 +1630,38 @@ static void fas216_bus_reset(FAS216_Info *info)
*/ */
irqreturn_t fas216_intr(FAS216_Info *info) irqreturn_t fas216_intr(FAS216_Info *info)
{ {
unsigned char isr, ssr, stat; unsigned char inst, is, stat;
int handled = IRQ_NONE; int handled = IRQ_NONE;
fas216_checkmagic(info); fas216_checkmagic(info);
stat = fas216_readb(info, REG_STAT); stat = fas216_readb(info, REG_STAT);
ssr = fas216_readb(info, REG_IS); is = fas216_readb(info, REG_IS);
isr = fas216_readb(info, REG_INST); inst = fas216_readb(info, REG_INST);
add_debug_list(stat, ssr, isr, info->scsi.phase); add_debug_list(stat, is, inst, info->scsi.phase);
if (stat & STAT_INT) { if (stat & STAT_INT) {
if (isr & INST_BUSRESET) { if (inst & INST_BUSRESET) {
fas216_log(info, 0, "bus reset detected"); fas216_log(info, 0, "bus reset detected");
fas216_bus_reset(info); fas216_bus_reset(info);
scsi_report_bus_reset(info->host, 0); scsi_report_bus_reset(info->host, 0);
} else if (isr & INST_ILLEGALCMD) { } else if (inst & INST_ILLEGALCMD) {
fas216_log(info, LOG_ERROR, "illegal command given\n"); fas216_log(info, LOG_ERROR, "illegal command given\n");
fas216_dumpstate(info); fas216_dumpstate(info);
print_debug_list(); print_debug_list();
} else if (isr & INST_DISCONNECT) } else if (inst & INST_DISCONNECT)
fas216_disconnect_intr(info); fas216_disconnect_intr(info);
else if (isr & INST_RESELECTED) /* reselected */ else if (inst & INST_RESELECTED) /* reselected */
fas216_reselected_intr(info); fas216_reselected_intr(info);
else if (isr & INST_BUSSERVICE) /* bus service request */ else if (inst & INST_BUSSERVICE) /* bus service request */
fas216_busservice_intr(info, stat, ssr); fas216_busservice_intr(info, stat, is);
else if (isr & INST_FUNCDONE) /* function done */ else if (inst & INST_FUNCDONE) /* function done */
fas216_funcdone_intr(info, stat, ssr); fas216_funcdone_intr(info, stat, is);
else else
fas216_log(info, 0, "unknown interrupt received:" fas216_log(info, 0, "unknown interrupt received:"
" phase %s isr %02X ssr %02X stat %02X", " phase %s inst %02X is %02X stat %02X",
fas216_drv_phase(info), isr, ssr, stat); fas216_drv_phase(info), inst, is, stat);
handled = IRQ_HANDLED; handled = IRQ_HANDLED;
} }
return handled; return handled;
...@@ -1948,7 +1752,7 @@ static int parity_test(FAS216_Info *info, int target) ...@@ -1948,7 +1752,7 @@ static int parity_test(FAS216_Info *info, int target)
{ {
#if 0 #if 0
if (target == 3) { if (target == 3) {
info->device[3].parity_check = 0; info->device[target].parity_check = 0;
return 1; return 1;
} }
#endif #endif
...@@ -1991,15 +1795,6 @@ static void fas216_start_command(FAS216_Info *info, Scsi_Cmnd *SCpnt) ...@@ -1991,15 +1795,6 @@ static void fas216_start_command(FAS216_Info *info, Scsi_Cmnd *SCpnt)
msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag); msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag);
do { do {
#ifdef SCSI2_WIDE
if (info->device[SCpnt->device->id].wide_state == neg_wait) {
info->device[SCpnt->device->id].wide_state = neg_inprogress;
msgqueue_addmsg(&info->scsi.msgs, 4,
EXTENDED_MESSAGE, 2, EXTENDED_WDTR,
info->ifcfg.wide_max_size);
break;
}
#endif
#ifdef SCSI2_SYNC #ifdef SCSI2_SYNC
if ((info->device[SCpnt->device->id].sync_state == neg_wait || if ((info->device[SCpnt->device->id].sync_state == neg_wait ||
info->device[SCpnt->device->id].sync_state == neg_complete) && info->device[SCpnt->device->id].sync_state == neg_complete) &&
...@@ -2140,8 +1935,18 @@ static void fas216_kick(FAS216_Info *info) ...@@ -2140,8 +1935,18 @@ static void fas216_kick(FAS216_Info *info)
} }
} while (0); } while (0);
if (!SCpnt) /* no command pending - just exit */ if (!SCpnt) {
/*
* no command pending, so enable reselection.
*/
fas216_cmd(info, CMD_ENABLESEL);
return; return;
}
/*
* We're going to start a command, so disable reselection
*/
fas216_cmd(info, CMD_DISABLESEL);
if (info->scsi.disconnectable && info->SCpnt) { if (info->scsi.disconnectable && info->SCpnt) {
fas216_log(info, LOG_CONNECT, fas216_log(info, LOG_CONNECT,
...@@ -2804,6 +2609,8 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt) ...@@ -2804,6 +2609,8 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt)
clear_bit(SDpnt->id * 8 + i, info->busyluns); clear_bit(SDpnt->id * 8 + i, info->busyluns);
} }
info->scsi.phase = PHASE_IDLE;
/* /*
* Reset the SCSI bus. Device cleanup happens in * Reset the SCSI bus. Device cleanup happens in
* the interrupt handler. * the interrupt handler.
...@@ -2833,7 +2640,8 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt) ...@@ -2833,7 +2640,8 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt)
*/ */
static void fas216_init_chip(FAS216_Info *info) static void fas216_init_chip(FAS216_Info *info)
{ {
fas216_writeb(info, REG_CLKF, fas216_clockrate(info->ifcfg.clockrate)); unsigned int clock = ((info->ifcfg.clockrate - 1) / 5 + 1) & 7;
fas216_writeb(info, REG_CLKF, clock);
fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]); fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
fas216_writeb(info, REG_CNTL2, info->scsi.cfg[1]); fas216_writeb(info, REG_CNTL2, info->scsi.cfg[1]);
fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]); fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]);
...@@ -3042,7 +2850,7 @@ int fas216_init(struct Scsi_Host *host) ...@@ -3042,7 +2850,7 @@ int fas216_init(struct Scsi_Host *host)
info->scsi.cfg[0] = host->this_id | CNTL1_PERE; info->scsi.cfg[0] = host->this_id | CNTL1_PERE;
info->scsi.cfg[1] = CNTL2_ENF | CNTL2_S2FE; info->scsi.cfg[1] = CNTL2_ENF | CNTL2_S2FE;
info->scsi.cfg[2] = info->ifcfg.cntl3 | info->scsi.cfg[2] = info->ifcfg.cntl3 |
CNTL3_ADIDCHK | CNTL3_G2CB | CNTL3_LBTM; CNTL3_ADIDCHK | CNTL3_QTAG | CNTL3_G2CB | CNTL3_LBTM;
info->scsi.async_stp = fas216_syncperiod(info, info->ifcfg.asyncperiod); info->scsi.async_stp = fas216_syncperiod(info, info->ifcfg.asyncperiod);
info->rst_dev_status = -1; info->rst_dev_status = -1;
...@@ -3082,6 +2890,12 @@ int fas216_add(struct Scsi_Host *host, struct device *dev) ...@@ -3082,6 +2890,12 @@ int fas216_add(struct Scsi_Host *host, struct device *dev)
FAS216_Info *info = (FAS216_Info *)host->hostdata; FAS216_Info *info = (FAS216_Info *)host->hostdata;
int type, ret; int type, ret;
if (info->ifcfg.clockrate <= 10 || info->ifcfg.clockrate > 40) {
printk(KERN_CRIT "fas216: invalid clock rate %u MHz\n",
info->ifcfg.clockrate);
return -EINVAL;
}
fas216_reset_state(info); fas216_reset_state(info);
type = fas216_detect_type(info); type = fas216_detect_type(info);
info->scsi.type = chip_types[type]; info->scsi.type = chip_types[type];
...@@ -3181,32 +2995,32 @@ int fas216_print_stats(FAS216_Info *info, char *buffer) ...@@ -3181,32 +2995,32 @@ int fas216_print_stats(FAS216_Info *info, char *buffer)
return p - buffer; return p - buffer;
} }
int fas216_print_device(FAS216_Info *info, Scsi_Device *scd, char *buffer) int fas216_print_devices(FAS216_Info *info, char *buffer)
{ {
struct fas216_device *dev = &info->device[scd->id]; struct fas216_device *dev;
int len = 0; Scsi_Device *scd;
char *p; char *p = buffer;
proc_print_scsidevice(scd, buffer, &len, 0);
p = buffer + len;
p += sprintf(p, " Extensions: ");
if (scd->tagged_supported) p += sprintf(p, "Device/Lun TaggedQ Parity Sync\n");
p += sprintf(p, "TAG %sabled [%d] ",
scd->tagged_queue ? "en" : "dis",
scd->current_tag);
p += sprintf(p, "%s\n", dev->parity_enabled ? "parity" : ""); list_for_each_entry(scd, &info->host->my_devices, siblings) {
dev = &info->device[scd->id];
p += sprintf(p, " %d/%d ", scd->id, scd->lun);
if (scd->tagged_supported)
p += sprintf(p, "%3sabled(%3d) ",
scd->tagged_queue ? "en" : "dis",
scd->current_tag);
else
p += sprintf(p, "unsupported ");
p += sprintf(p, " Transfers : %d-bit ", p += sprintf(p, "%3sabled ", dev->parity_enabled ? "en" : "dis");
8 << dev->wide_xfer);
if (dev->sof) if (dev->sof)
p += sprintf(p, "sync offset %d, %d ns\n", p += sprintf(p, "offset %d, %d ns\n",
dev->sof, dev->period * 4); dev->sof, dev->period * 4);
else else
p += sprintf(p, "async\n"); p += sprintf(p, "async\n");
}
return p - buffer; return p - buffer;
} }
...@@ -3224,7 +3038,7 @@ EXPORT_SYMBOL(fas216_eh_bus_reset); ...@@ -3224,7 +3038,7 @@ EXPORT_SYMBOL(fas216_eh_bus_reset);
EXPORT_SYMBOL(fas216_eh_host_reset); EXPORT_SYMBOL(fas216_eh_host_reset);
EXPORT_SYMBOL(fas216_print_host); EXPORT_SYMBOL(fas216_print_host);
EXPORT_SYMBOL(fas216_print_stats); EXPORT_SYMBOL(fas216_print_stats);
EXPORT_SYMBOL(fas216_print_device); EXPORT_SYMBOL(fas216_print_devices);
MODULE_AUTHOR("Russell King"); MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("Generic FAS216/NCR53C9x driver core"); MODULE_DESCRIPTION("Generic FAS216/NCR53C9x driver core");
......
...@@ -177,7 +177,6 @@ typedef enum { ...@@ -177,7 +177,6 @@ typedef enum {
PHASE_SELSTEPS, /* selection with command steps */ PHASE_SELSTEPS, /* selection with command steps */
PHASE_COMMAND, /* command sent */ PHASE_COMMAND, /* command sent */
PHASE_MESSAGESENT, /* selected, and we're sending cmd */ PHASE_MESSAGESENT, /* selected, and we're sending cmd */
PHASE_RECONNECTED, /* reconnected */
PHASE_DATAOUT, /* data out to device */ PHASE_DATAOUT, /* data out to device */
PHASE_DATAIN, /* data in from device */ PHASE_DATAIN, /* data in from device */
PHASE_MSGIN, /* message in from device */ PHASE_MSGIN, /* message in from device */
...@@ -244,12 +243,6 @@ typedef struct { ...@@ -244,12 +243,6 @@ typedef struct {
const char *type; /* chip type */ const char *type; /* chip type */
unsigned int irq; /* interrupt */ unsigned int irq; /* interrupt */
struct {
unsigned char target; /* reconnected target */
unsigned char lun; /* reconnected lun */
unsigned char tag; /* reconnected tag */
} reconnected;
Scsi_Pointer SCp; /* current commands data pointer */ Scsi_Pointer SCp; /* current commands data pointer */
MsgQueue_t msgs; /* message queue for connected device */ MsgQueue_t msgs; /* message queue for connected device */
...@@ -368,7 +361,7 @@ extern void fas216_release (struct Scsi_Host *instance); ...@@ -368,7 +361,7 @@ extern void fas216_release (struct Scsi_Host *instance);
extern int fas216_print_host(FAS216_Info *info, char *buffer); extern int fas216_print_host(FAS216_Info *info, char *buffer);
extern int fas216_print_stats(FAS216_Info *info, char *buffer); extern int fas216_print_stats(FAS216_Info *info, char *buffer);
extern int fas216_print_device(FAS216_Info *info, Scsi_Device *scd, char *buffer); extern int fas216_print_devices(FAS216_Info *info, char *buffer);
/* Function: int fas216_eh_abort(Scsi_Cmnd *SCpnt) /* Function: int fas216_eh_abort(Scsi_Cmnd *SCpnt)
* Purpose : abort this command * Purpose : abort this command
......
...@@ -192,7 +192,6 @@ static struct ecard_driver oakscsi_driver = { ...@@ -192,7 +192,6 @@ static struct ecard_driver oakscsi_driver = {
.remove = __devexit_p(oakscsi_remove), .remove = __devexit_p(oakscsi_remove),
.id_table = oakscsi_cids, .id_table = oakscsi_cids,
.drv = { .drv = {
.devclass = &shost_devclass,
.name = "oakscsi", .name = "oakscsi",
}, },
}; };
......
...@@ -242,10 +242,10 @@ powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length) ...@@ -242,10 +242,10 @@ powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
int powertecscsi_proc_info(char *buffer, char **start, off_t offset, int powertecscsi_proc_info(char *buffer, char **start, off_t offset,
int length, int host_no, int inout) int length, int host_no, int inout)
{ {
int pos, begin;
struct Scsi_Host *host; struct Scsi_Host *host;
struct powertec_info *info; struct powertec_info *info;
Scsi_Device *scd; char *p = buffer;
int pos;
host = scsi_host_hn_get(host_no); host = scsi_host_hn_get(host_no);
if (!host) if (!host)
...@@ -256,29 +256,16 @@ int powertecscsi_proc_info(char *buffer, char **start, off_t offset, ...@@ -256,29 +256,16 @@ int powertecscsi_proc_info(char *buffer, char **start, off_t offset,
info = (struct powertec_info *)host->hostdata; info = (struct powertec_info *)host->hostdata;
begin = 0; p += sprintf(p, "PowerTec SCSI driver v%s\n", VERSION);
pos = sprintf(buffer, "PowerTec SCSI driver v%s\n", VERSION); p += fas216_print_host(&info->info, p);
pos += fas216_print_host(&info->info, buffer + pos); p += sprintf(p, "Term : o%s\n",
pos += sprintf(buffer + pos, "Term : o%s\n",
info->term_ctl ? "n" : "ff"); info->term_ctl ? "n" : "ff");
pos += fas216_print_stats(&info->info, buffer + pos); p += fas216_print_stats(&info->info, p);
p += fas216_print_devices(&info->info, p);
pos += sprintf(buffer+pos, "\nAttached devices:\n"); *start = buffer + offset;
pos = p - buffer - offset;
list_for_each_entry(scd, &host->my_devices, siblings) {
pos += fas216_print_device(&info->info, scd, buffer + pos);
if (pos + begin < offset) {
begin += pos;
pos = 0;
}
if (pos + begin > offset + length)
break;
}
*start = buffer + (offset - begin);
pos -= offset - begin;
if (pos > length) if (pos > length)
pos = length; pos = length;
...@@ -475,7 +462,6 @@ static struct ecard_driver powertecscsi_driver = { ...@@ -475,7 +462,6 @@ static struct ecard_driver powertecscsi_driver = {
.remove = __devexit_p(powertecscsi_remove), .remove = __devexit_p(powertecscsi_remove),
.id_table = powertecscsi_cids, .id_table = powertecscsi_cids,
.drv = { .drv = {
.devclass = &shost_devclass,
.name = "powertecscsi", .name = "powertecscsi",
}, },
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment