Commit bfc7c89f authored by Jeff Garzik's avatar Jeff Garzik

[ISDN] Remove CONFIG_PCI ifdefs from 100% PCI source code

Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 782e3b3b
......@@ -20,8 +20,6 @@
#include <linux/pci.h>
#include "bkm_ax.h"
#ifdef CONFIG_PCI
#define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */
extern const char *CardType[];
......@@ -279,12 +277,9 @@ static u_char pci_bus __devinitdata = 0;
static u_char pci_device_fn __devinitdata = 0;
static u_char pci_irq __devinitdata = 0;
#endif /* CONFIG_PCI */
int __devinit
setup_sct_quadro(struct IsdnCard *card)
{
#ifdef CONFIG_PCI
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_int found = 0;
......@@ -442,7 +437,4 @@ setup_sct_quadro(struct IsdnCard *card)
sct_quadro_subtypes[cs->subtyp],
readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
return (1);
#else
printk(KERN_ERR "HiSax: bkm_a8 only supported on PCI Systems\n");
#endif /* CONFIG_PCI */
}
......@@ -295,11 +295,12 @@ setup_telespci(struct IsdnCard *card)
#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
strcpy(tmp, telespci_revision);
printk(KERN_INFO "HiSax: Teles/PCI driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_TELESPCI)
return (0);
#ifdef CONFIG_PCI
if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
if (pci_enable_device(dev_tel))
return(0);
......@@ -317,11 +318,6 @@ setup_telespci(struct IsdnCard *card)
printk(KERN_WARNING "TelesPCI: No PCI card found\n");
return(0);
}
#else
printk(KERN_WARNING "HiSax: Teles/PCI and NO_PCI_BIOS\n");
printk(KERN_WARNING "HiSax: Teles/PCI unable to config\n");
return (0);
#endif /* CONFIG_PCI */
/* Initialize Zoran PCI controller */
writel(0x00000000, cs->hw.teles0.membase + 0x28);
......
......@@ -1009,7 +1009,7 @@ setup_w6692(struct IsdnCard *card)
printk(KERN_INFO "HiSax: W6692 driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_W6692)
return (0);
#ifdef CONFIG_PCI
while (id_list[id_idx].vendor_id) {
dev_w6692 = pci_find_device(id_list[id_idx].vendor_id,
id_list[id_idx].device_id,
......@@ -1061,11 +1061,6 @@ setup_w6692(struct IsdnCard *card)
cs->hw.w6692.iobase + 255);
return (0);
}
#else
printk(KERN_WARNING "HiSax: W6692 and NO_PCI_BIOS\n");
printk(KERN_WARNING "HiSax: W6692 unable to config\n");
return (0);
#endif /* CONFIG_PCI */
printk(KERN_INFO
"HiSax: %s config irq:%d I/O:%x\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment